G6-LLDP-MIB

All MIBs › G6-LLDP-MIB

Organization: MICROSENS GmbH & Co. KG

Last Updated: 2018-02-12

Category: Protocol: LLDP, Vendor: MICROSENS

Description: MICROSENS G6 switch MIB for Link Layer Discovery Protocol neighbor information and advertisement configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is G6-LLDP-MIB?

G6-LLDP-MIB is a Microsens proprietary MIB for its Generation 6 (G6) family of Ethernet switches, providing configuration objects for the Link Layer Discovery Protocol (LLDP) and related neighbor-discovery features including CDP compatibility and LLDP-MED. It exposes per-device configuration such as enabling LLDP/CDP globally, selecting which ports have LLDP enabled, receive-only mode, and MED (Media Endpoint Discovery) inventory/voice-VLAN TLV controls. Its monitoring/management value is primarily software configuration status of the neighbor-discovery feature set: administrators verify configEnableLldp and configLldpEnabledPorts to confirm LLDP is active on the expected ports, which in turn supports topology visibility and neighbor-device inventory across the switch. It builds on the IEEE 802.1AB LLDP standard and LLDP-MED extensions, layered with Microsens-specific configuration objects rather than the standard LLDP-MIB tables. It is deployed on Microsens G6 managed Ethernet switches used in industrial or building-network environments requiring topology and endpoint discovery. Engineers can download the G6-LLDP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in G6-LLDP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Microsens G6 Ethernet switch

Monitoring Examples

An admin would poll configTable/configEntry, indexed by configIndex, to check configEnableLldp and configLldpEnabledPorts, confirming LLDP is turned on for the ports expected to advertise to neighboring devices. If configReceiveOnly is set unexpectedly, the switch would stop advertising its own LLDP information while still learning neighbors, explaining why other devices no longer see it in their neighbor tables. configAdvertizedMedClass and configDisableMedInventory would be checked when a VoIP phone fails to receive expected LLDP-MED inventory or voice VLAN assignment (configDisableVoiceVlanTlv).

What Can Be Monitored

LLDP enable/disable state
CDP enable/disable and version
per-port LLDP enabled status
receive-only mode
LLDP-MED class advertised
voice VLAN/MED inventory TLV settings

Imported Objects

From MICROSENS-G6-MIB

g6	OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DisplayString
MacAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
protocol	1.3.6.1.4.1.3181.10.6.2			Microsens private MIB for Generation 6 Ethernet Switches
lldp	1.3.6.1.4.1.3181.10.6.2.43
configTable	1.3.6.1.4.1.3181.10.6.2.43.1		not-accessible	General settings for LLDP (link layer discovery protocol). This protocol is used to identify the directly attached neighbor devices. This is useful to build a network topolgy. It is also used to identify voip telephones and to set them up.
configEntry	1.3.6.1.4.1.3181.10.6.2.43.1.1		not-accessible
INT configIndex	1.3.6.1.4.1.3181.10.6.2.43.1.1.1	INTEGER	not-accessible	Automatically generated
INT configEnableLldp	1.3.6.1.4.1.3181.10.6.2.43.1.1.2	INTEGER	read-write	This generally enables the link layer discovery protocol (LLDP).
INT configEnableCdp	1.3.6.1.4.1.3181.10.6.2.43.1.1.3	INTEGER	read-write	This enables Cisco discovery protocol. Check cdp_version parameter to select CDP version.
INT configLldpEnabledPorts	1.3.6.1.4.1.3181.10.6.2.43.1.1.4	INTEGER	read-write	This parameter permits port selective LLDP enabling. When empty all ports are enabled! Syntax: slot/port, slot/port or use hex value for quick setup. Example = 0x7 defines ports 1-3.
INT configReceiveOnly	1.3.6.1.4.1.3181.10.6.2.43.1.1.5	INTEGER	read-write	This enables receive only mode. LLDP will not send any frames. It will only listen to its neighbours.
INT configForwardToLink	1.3.6.1.4.1.3181.10.6.2.43.1.1.6	INTEGER	read-write	This mode forwards all received LLDP packets to the uplink port. In combination with receive_only option enabled this unit keeps quiet and all LLDP handling should be taken care off by the upstream device.
INT configAdvertizedMedClass	1.3.6.1.4.1.3181.10.6.2.43.1.1.7	INTEGER	read-write	Enables emission of LLDP-MED frames of a certain class.
INT configDisableMedInventory	1.3.6.1.4.1.3181.10.6.2.43.1.1.8	INTEGER	read-write	Disable LLDP-MED inventory TLV transmission.
INT configDisableVoiceVlanTlv	1.3.6.1.4.1.3181.10.6.2.43.1.1.9	INTEGER	read-write	Disable voice vlan indication TLV transmission.
INT configCdpVersion	1.3.6.1.4.1.3181.10.6.2.43.1.1.10	INTEGER	read-write	Determines which version CDP messages are used.
I32 configVoiceVlanPrio	1.3.6.1.4.1.3181.10.6.2.43.1.1.11	Integer32	read-write	Layer 2 priority used for voice vlan in voip application.
I32 configVoiceVlanSignalPrio	1.3.6.1.4.1.3181.10.6.2.43.1.1.12	Integer32	read-write	Layer 2 priority used for voice vlan signaling in voip application.
I32 configVoiceDscp	1.3.6.1.4.1.3181.10.6.2.43.1.1.13	Integer32	read-write	DiffServ codepoint (0-63) for voip application
I32 configSignalingDscp	1.3.6.1.4.1.3181.10.6.2.43.1.1.14	Integer32	read-write	DiffServ codepoint (0-63) for voip signaling
I32 configTimeToLive	1.3.6.1.4.1.3181.10.6.2.43.1.1.15	Integer32	read-write	The time to live value defines the time for which the lldp transmitted details are valid and can be displayed in the status.
I32 configTxDelay	1.3.6.1.4.1.3181.10.6.2.43.1.1.16	Integer32	read-write	Transmission delay in seconds between successive LLDP frame transmissions initiated by changes in the LLDP local configuration.
I32 configMsgTxInterval	1.3.6.1.4.1.3181.10.6.2.43.1.1.17	Integer32	read-write	The interval at which LLDP frames are transmitted on behalf of this LLDP agent.
INT configForceLldpTransmission	1.3.6.1.4.1.3181.10.6.2.43.1.1.18	INTEGER	read-write	Force to send LLDP packets even when there is no LLDP peer detected.
INT configLldpResponsePreferred	1.3.6.1.4.1.3181.10.6.2.43.1.1.19	INTEGER	read-write	When enabled LLDP responses takes precende over CDP protocol responses.
localCoordinatesTable	1.3.6.1.4.1.3181.10.6.2.43.2		not-accessible	Detailed GPS information about the pysical location of this device may be entered here.
localCoordinatesEntry	1.3.6.1.4.1.3181.10.6.2.43.2.1		not-accessible
INT localCoordinatesIndex	1.3.6.1.4.1.3181.10.6.2.43.2.1.1	INTEGER	not-accessible	Automatically generated
STR localCoordinatesLatitude	1.3.6.1.4.1.3181.10.6.2.43.2.1.2	DisplayString	read-write	A value in degrees such as: 50,123
I32 localCoordinatesLatResolution	1.3.6.1.4.1.3181.10.6.2.43.2.1.3	Integer32	read-write	A value in bits. Higher value is more accurate.
STR localCoordinatesLongitude	1.3.6.1.4.1.3181.10.6.2.43.2.1.4	DisplayString	read-write	A value in degrees such as: 50,123
I32 localCoordinatesLongResolution	1.3.6.1.4.1.3181.10.6.2.43.2.1.5	Integer32	read-write	A value in bits. Higher value is more accurate.
STR localCoordinatesAltitude	1.3.6.1.4.1.3181.10.6.2.43.2.1.6	DisplayString	read-write	A value in meters.
I32 localCoordinatesAltResolution	1.3.6.1.4.1.3181.10.6.2.43.2.1.7	Integer32	read-write	A value in bits. Higher value is more accurate.
INT localCoordinatesAltType	1.3.6.1.4.1.3181.10.6.2.43.2.1.8	INTEGER	read-write	Defines in which way the altitude is interpreted.
STR localCoordinatesDatum	1.3.6.1.4.1.3181.10.6.2.43.2.1.9	DisplayString	read-write	Name of the map the given coordinates are based upon.
localCivicLocationTable	1.3.6.1.4.1.3181.10.6.2.43.3		not-accessible	Detailed address information about the physical location of this device may be entered here. These data are forwarded using the LLDP-MED protocol.
localCivicLocationEntry	1.3.6.1.4.1.3181.10.6.2.43.3.1		not-accessible
INT localCivicLocationIndex	1.3.6.1.4.1.3181.10.6.2.43.3.1.1	INTEGER	not-accessible	Automatically generated
STR localCivicLocationCountryCode	1.3.6.1.4.1.3181.10.6.2.43.3.1.2	DisplayString	read-write	Two-letter ISO 3166 country code in capital ASCII letters. Use DE for Germany, etc.
STR localCivicLocationLanguage	1.3.6.1.4.1.3181.10.6.2.43.3.1.3	DisplayString	read-write	ISO 639 language code used for presenting the address information.
STR localCivicLocationNationalSubdivision	1.3.6.1.4.1.3181.10.6.2.43.3.1.4	DisplayString	read-write	National subdivision: state, canton, region, province, or prefecture. Example: Hessen
STR localCivicLocationCounty	1.3.6.1.4.1.3181.10.6.2.43.3.1.5	DisplayString	read-write	County / parish / district. Example: Landkreis Darmstadt
STR localCivicLocationTown	1.3.6.1.4.1.3181.10.6.2.43.3.1.6	DisplayString	read-write	City / township. Example: Frankfurt
STR localCivicLocationDistrict	1.3.6.1.4.1.3181.10.6.2.43.3.1.7	DisplayString	read-write	City district / division / borough / ward.
STR localCivicLocationBlock	1.3.6.1.4.1.3181.10.6.2.43.3.1.8	DisplayString	read-write	Neighborhood / block.
STR localCivicLocationStreet	1.3.6.1.4.1.3181.10.6.2.43.3.1.9	DisplayString	read-write	Name of the street without house number.
STR localCivicLocationLeadingStreetDirection	1.3.6.1.4.1.3181.10.6.2.43.3.1.10	DisplayString	read-write	Use any of these values or leave blank: N,E,W,S,NE,NW,SE,SW.
STR localCivicLocationTrailingStreetSuffix	1.3.6.1.4.1.3181.10.6.2.43.3.1.11	DisplayString	read-write	Use any of these values or leave blank: N,E,W,S,NE,NW,SE,SW.
STR localCivicLocationStreetSuffix	1.3.6.1.4.1.3181.10.6.2.43.3.1.12	DisplayString	read-write	Street suffix such as place or avenue.
STR localCivicLocationHouseNumber	1.3.6.1.4.1.3181.10.6.2.43.3.1.13	DisplayString	read-write	House number without a possible suffix.
STR localCivicLocationHouseNumberSuffix	1.3.6.1.4.1.3181.10.6.2.43.3.1.14	DisplayString	read-write	A modifier to the house number. It does not include parts of the house number. Example: a
STR localCivicLocationLandmark	1.3.6.1.4.1.3181.10.6.2.43.3.1.15	DisplayString	read-write	Landmark or vanity address for easier reference. Example: Airport Frankfurt
STR localCivicLocationAdditionalInfo	1.3.6.1.4.1.3181.10.6.2.43.3.1.16	DisplayString	read-write	Additional location information without specified format.
STR localCivicLocationName	1.3.6.1.4.1.3181.10.6.2.43.3.1.17	DisplayString	read-write	Identifies the person or organization associated with the address. Example: Sunshine Airline Office
STR localCivicLocationZipCode	1.3.6.1.4.1.3181.10.6.2.43.3.1.18	DisplayString	read-write	Postal zip code for the address.
STR localCivicLocationBuilding	1.3.6.1.4.1.3181.10.6.2.43.3.1.19	DisplayString	read-write	The name of the building if this exists. Example: Terminal Building East
STR localCivicLocationUnit	1.3.6.1.4.1.3181.10.6.2.43.3.1.20	DisplayString	read-write	Unit / appartment / suite.
STR localCivicLocationFloor	1.3.6.1.4.1.3181.10.6.2.43.3.1.21	DisplayString	read-write	Floor value. Example: 1 for first floor
STR localCivicLocationRoom	1.3.6.1.4.1.3181.10.6.2.43.3.1.22	DisplayString	read-write	Room number or name.
STR localCivicLocationPlaceType	1.3.6.1.4.1.3181.10.6.2.43.3.1.23	DisplayString	read-write	Place type. Example: Office
STR localCivicLocationScript	1.3.6.1.4.1.3181.10.6.2.43.3.1.24	DisplayString	read-write	The script (from ISO 15924 [14]) used to encode the address information. Default: Latn
STR localCivicLocationElinNumber	1.3.6.1.4.1.3181.10.6.2.43.3.1.25	DisplayString	read-write	Emergency Call Services (ECS) Emergency Location Identification Number (ELIN).
receivedOverviewTable	1.3.6.1.4.1.3181.10.6.2.43.100		not-accessible
receivedOverviewEntry	1.3.6.1.4.1.3181.10.6.2.43.100.1		not-accessible
INT receivedOverviewPortIndex	1.3.6.1.4.1.3181.10.6.2.43.100.1.1	INTEGER	not-accessible	Automatically generated
STR receivedOverviewSysName	1.3.6.1.4.1.3181.10.6.2.43.100.1.2	DisplayString	read-only	System name.
STR receivedOverviewSysDesc	1.3.6.1.4.1.3181.10.6.2.43.100.1.3	DisplayString	read-only	System description.
INT receivedOverviewChassisIdSubtype	1.3.6.1.4.1.3181.10.6.2.43.100.1.4	INTEGER	read-only	Type of chassis id.
STR receivedOverviewChassisId	1.3.6.1.4.1.3181.10.6.2.43.100.1.5	DisplayString	read-only	Chassis id of received frame.
STR receivedOverviewMgmtIp	1.3.6.1.4.1.3181.10.6.2.43.100.1.6	DisplayString	read-only	Management IP address.
STR receivedOverviewMgmtOid	1.3.6.1.4.1.3181.10.6.2.43.100.1.7	DisplayString	read-only	Management start OID for SNMP access.
BIT receivedOverviewCapabilities	1.3.6.1.4.1.3181.10.6.2.43.100.1.8	Bits	read-only	LLDP capabilities supported.
BIT receivedOverviewCapabilitiesEnabled	1.3.6.1.4.1.3181.10.6.2.43.100.1.9	Bits	read-only	LLDP capabilities enabled.
BIT receivedOverviewMedCapabilities	1.3.6.1.4.1.3181.10.6.2.43.100.1.10	Bits	read-only	LLDP_MED capabilities.
INT receivedOverviewPortIdSubtype	1.3.6.1.4.1.3181.10.6.2.43.100.1.11	INTEGER	read-only	Type of port id.
STR receivedOverviewPortIdentification	1.3.6.1.4.1.3181.10.6.2.43.100.1.12	DisplayString	read-only	Port id.
STR receivedOverviewPortDescription	1.3.6.1.4.1.3181.10.6.2.43.100.1.13	DisplayString	read-only	Port description.
I32 receivedOverviewPortVlan	1.3.6.1.4.1.3181.10.6.2.43.100.1.14	Integer32	read-only	Port vlan identifier. Related to port_default_vlan_id.
receivedCoordinatesTable	1.3.6.1.4.1.3181.10.6.2.43.101		not-accessible	Detailed GPS information about the pysical location of the attached device for each port are visible here if provided through the LLDP-MED protocol.
receivedCoordinatesEntry	1.3.6.1.4.1.3181.10.6.2.43.101.1		not-accessible
INT receivedCoordinatesPortIndex	1.3.6.1.4.1.3181.10.6.2.43.101.1.1	INTEGER	not-accessible	Automatically generated
STR receivedCoordinatesLatitude	1.3.6.1.4.1.3181.10.6.2.43.101.1.2	DisplayString	read-only	A value in degrees such as: 50,123
I32 receivedCoordinatesLatResolution	1.3.6.1.4.1.3181.10.6.2.43.101.1.3	Integer32	read-only	A value in bits. Higher value is more accurate.
STR receivedCoordinatesLongitude	1.3.6.1.4.1.3181.10.6.2.43.101.1.4	DisplayString	read-only	A value in degrees such as: 50,123
I32 receivedCoordinatesLongResolution	1.3.6.1.4.1.3181.10.6.2.43.101.1.5	Integer32	read-only	A value in bits. Higher value is more accurate.
STR receivedCoordinatesAltitude	1.3.6.1.4.1.3181.10.6.2.43.101.1.6	DisplayString	read-only	A value in meters or the floor level depending on definition.
I32 receivedCoordinatesAltResolution	1.3.6.1.4.1.3181.10.6.2.43.101.1.7	Integer32	read-only	A value in bits. Higher value is more accurate.
INT receivedCoordinatesAltUnit	1.3.6.1.4.1.3181.10.6.2.43.101.1.8	INTEGER	read-only	Defines in which way the altitude is interpreted.
STR receivedCoordinatesDatum	1.3.6.1.4.1.3181.10.6.2.43.101.1.9	DisplayString	read-only	Name of the map the given coordinates are based upon.
receivedCivicLocationsTable	1.3.6.1.4.1.3181.10.6.2.43.102		not-accessible	Detailed address information about the physical location of the attached device for each port are visible here if provided through the LLDP-MED protocol.
receivedCivicLocationsEntry	1.3.6.1.4.1.3181.10.6.2.43.102.1		not-accessible
INT receivedCivicLocationsPortIndex	1.3.6.1.4.1.3181.10.6.2.43.102.1.1	INTEGER	not-accessible	Automatically generated
STR receivedCivicLocationsCountryCode	1.3.6.1.4.1.3181.10.6.2.43.102.1.2	DisplayString	read-only	Two-letter ISO 3166 country code in capital ASCII letters. Use DE for Germany, etc.
STR receivedCivicLocationsLanguage	1.3.6.1.4.1.3181.10.6.2.43.102.1.3	DisplayString	read-only	ISO 639 language code used for presenting the address information.
STR receivedCivicLocationsNationalSubdivision	1.3.6.1.4.1.3181.10.6.2.43.102.1.4	DisplayString	read-only	National subdivision: state, canton, region, province, or prefecture. Example: Hessen.
STR receivedCivicLocationsCounty	1.3.6.1.4.1.3181.10.6.2.43.102.1.5	DisplayString	read-only	County / parish / district. Example: Landkreis Darmstadt
STR receivedCivicLocationsTown	1.3.6.1.4.1.3181.10.6.2.43.102.1.6	DisplayString	read-only	City / township. Example: Frankfurt
STR receivedCivicLocationsDistrict	1.3.6.1.4.1.3181.10.6.2.43.102.1.7	DisplayString	read-only	City district / division / borough / ward.
STR receivedCivicLocationsBlock	1.3.6.1.4.1.3181.10.6.2.43.102.1.8	DisplayString	read-only	Neighborhood / block.
STR receivedCivicLocationsStreet	1.3.6.1.4.1.3181.10.6.2.43.102.1.9	DisplayString	read-only	Name of the street without house number.
STR receivedCivicLocationsLeadingStreetDirection	1.3.6.1.4.1.3181.10.6.2.43.102.1.10	DisplayString	read-only	Use any of these values or leave blank: N,E,W,S,NE,NW,SE,SW.
STR receivedCivicLocationsTrailingStreetSuffix	1.3.6.1.4.1.3181.10.6.2.43.102.1.11	DisplayString	read-only	Use any of these values or leave blank: N,E,W,S,NE,NW,SE,SW.
STR receivedCivicLocationsStreetSuffix	1.3.6.1.4.1.3181.10.6.2.43.102.1.12	DisplayString	read-only	Street suffix such as place or avenue.
STR receivedCivicLocationsHouseNumber	1.3.6.1.4.1.3181.10.6.2.43.102.1.13	DisplayString	read-only	House number without a possible suffix.
STR receivedCivicLocationsHouseNumberSuffix	1.3.6.1.4.1.3181.10.6.2.43.102.1.14	DisplayString	read-only	A modifier to the house number. It does not include parts of the house number. Example: a
STR receivedCivicLocationsLandmark	1.3.6.1.4.1.3181.10.6.2.43.102.1.15	DisplayString	read-only	Landmark or vanity address for easier reference. Example: Airport Frankfurt
STR receivedCivicLocationsAdditionalInfo	1.3.6.1.4.1.3181.10.6.2.43.102.1.16	DisplayString	read-only	Additional location information without specified format.
STR receivedCivicLocationsName	1.3.6.1.4.1.3181.10.6.2.43.102.1.17	DisplayString	read-only	Identifies the person or organization associated with the address. Example: Sunshine Airline Office
STR receivedCivicLocationsZipCode	1.3.6.1.4.1.3181.10.6.2.43.102.1.18	DisplayString	read-only	Postal zip code for the address.
STR receivedCivicLocationsBuilding	1.3.6.1.4.1.3181.10.6.2.43.102.1.19	DisplayString	read-only	The name of the building if this exists. Example: Terminal Building East
STR receivedCivicLocationsUnit	1.3.6.1.4.1.3181.10.6.2.43.102.1.20	DisplayString	read-only	Unit / appartment / suite.
STR receivedCivicLocationsFloor	1.3.6.1.4.1.3181.10.6.2.43.102.1.21	DisplayString	read-only	Floor value. Example: 1 for first floor.
STR receivedCivicLocationsRoom	1.3.6.1.4.1.3181.10.6.2.43.102.1.22	DisplayString	read-only	Room number or name.
STR receivedCivicLocationsPlaceType	1.3.6.1.4.1.3181.10.6.2.43.102.1.23	DisplayString	read-only	Place type. Example: Office.
STR receivedCivicLocationsScript	1.3.6.1.4.1.3181.10.6.2.43.102.1.24	DisplayString	read-only	The script (from ISO 15924 [14]) used to encode the address information. Default: Latn
STR receivedCivicLocationsElinNumber	1.3.6.1.4.1.3181.10.6.2.43.102.1.25	DisplayString	read-only	Emergency Call Services (ECS) Emergency Location Identification Number (ELIN).
receivedPoliciesTable	1.3.6.1.4.1.3181.10.6.2.43.103		not-accessible	Detailed information about the attached applications.
receivedPoliciesEntry	1.3.6.1.4.1.3181.10.6.2.43.103.1		not-accessible
INT receivedPoliciesPortIndex	1.3.6.1.4.1.3181.10.6.2.43.103.1.1	INTEGER	not-accessible	Automatically generated
INT receivedPoliciesApplicationType	1.3.6.1.4.1.3181.10.6.2.43.103.1.2	INTEGER	read-only	Valid application types.
INT receivedPoliciesPolicyDefined	1.3.6.1.4.1.3181.10.6.2.43.103.1.3	INTEGER	read-only	False indicates policy is unknown. True indicates policy is defined.
INT receivedPoliciesTaggedVlan	1.3.6.1.4.1.3181.10.6.2.43.103.1.4	INTEGER	read-only	When set VLAN tagging is used.
U32 receivedPoliciesVlanId	1.3.6.1.4.1.3181.10.6.2.43.103.1.5	Unsigned32	read-only	0 - only the priority level is significant. / IEEE 802.1q VLAN ID (VID) value. Related to voice vlan.
INT receivedPoliciesLayer2Priority	1.3.6.1.4.1.3181.10.6.2.43.103.1.6	INTEGER	read-only	IEEE 802.1d / IEEE 802.1p Layer 2 Priority.
I32 receivedPoliciesDscp	1.3.6.1.4.1.3181.10.6.2.43.103.1.7	Integer32	read-only	DiffServ/Differentiated Services Code Point (DSCP) value as defined in IETF RFC 2474 for the specified application type.
receivedInventoryInfosTable	1.3.6.1.4.1.3181.10.6.2.43.104		not-accessible	This table lists general inventory data of the attached equipment.
receivedInventoryInfosEntry	1.3.6.1.4.1.3181.10.6.2.43.104.1		not-accessible
INT receivedInventoryInfosPortIndex	1.3.6.1.4.1.3181.10.6.2.43.104.1.1	INTEGER	not-accessible	Automatically generated
STR receivedInventoryInfosHardwareRevision	1.3.6.1.4.1.3181.10.6.2.43.104.1.2	DisplayString	read-only	Hardware version
STR receivedInventoryInfosFirmwareRevision	1.3.6.1.4.1.3181.10.6.2.43.104.1.3	DisplayString	read-only	Firmware version
STR receivedInventoryInfosSoftwareRevision	1.3.6.1.4.1.3181.10.6.2.43.104.1.4	DisplayString	read-only	Software version
STR receivedInventoryInfosSerialNumber	1.3.6.1.4.1.3181.10.6.2.43.104.1.5	DisplayString	read-only	Serial number
STR receivedInventoryInfosManufacturer	1.3.6.1.4.1.3181.10.6.2.43.104.1.6	DisplayString	read-only	Manufacturer name
STR receivedInventoryInfosModelName	1.3.6.1.4.1.3181.10.6.2.43.104.1.7	DisplayString	read-only	Vendor-specific model name
STR receivedInventoryInfosAssetId	1.3.6.1.4.1.3181.10.6.2.43.104.1.8	DisplayString	read-only	Vendor-specific asset tracking identifier
receivedPoeInfosTable	1.3.6.1.4.1.3181.10.6.2.43.105		not-accessible	Detailed PoE information about the attached applications.
receivedPoeInfosEntry	1.3.6.1.4.1.3181.10.6.2.43.105.1		not-accessible
INT receivedPoeInfosPortIndex	1.3.6.1.4.1.3181.10.6.2.43.105.1.1	INTEGER	not-accessible	Automatically generated
INT receivedPoeInfosType	1.3.6.1.4.1.3181.10.6.2.43.105.1.2	INTEGER	read-only	Type of PoE equipment.
INT receivedPoeInfosSource	1.3.6.1.4.1.3181.10.6.2.43.105.1.3	INTEGER	read-only	Describes the power source.
INT receivedPoeInfosPriority	1.3.6.1.4.1.3181.10.6.2.43.105.1.4	INTEGER	read-only	Indicates priority of this device.
U32 receivedPoeInfosValue	1.3.6.1.4.1.3181.10.6.2.43.105.1.5	Unsigned32	read-only	Indicates the power available from the PSE via this port expressed in units of 0.1 watts on the remote device.
receivedPoeControlTable	1.3.6.1.4.1.3181.10.6.2.43.106		not-accessible
receivedPoeControlEntry	1.3.6.1.4.1.3181.10.6.2.43.106.1		not-accessible
INT receivedPoeControlPortIndex	1.3.6.1.4.1.3181.10.6.2.43.106.1.1	INTEGER	not-accessible	Automatically generated
INT receivedPoeControlType	1.3.6.1.4.1.3181.10.6.2.43.106.1.2	INTEGER	read-only	Indicates device type.
INT receivedPoeControlPoePowerSupported	1.3.6.1.4.1.3181.10.6.2.43.106.1.3	INTEGER	read-only	Indicates if PoE is supported by the interface.
INT receivedPoeControlPoePowerEnabled	1.3.6.1.4.1.3181.10.6.2.43.106.1.4	INTEGER	read-only	Indicates if PoE is enabled for this interface.
INT receivedPoeControlPairControl	1.3.6.1.4.1.3181.10.6.2.43.106.1.5	INTEGER	read-only	Indicates if the pair selection can be controlled on the given port
INT receivedPoeControlPowerPairs	1.3.6.1.4.1.3181.10.6.2.43.106.1.6	INTEGER	read-only	Indicates which pins of the plug are used for power.
INT receivedPoeControlPowerClass	1.3.6.1.4.1.3181.10.6.2.43.106.1.7	INTEGER	read-only	Required PoE class.
I32 receivedPoeControlDeviceType	1.3.6.1.4.1.3181.10.6.2.43.106.1.8	Integer32	read-only	Type of PoE equipment.
INT receivedPoeControlSource	1.3.6.1.4.1.3181.10.6.2.43.106.1.9	INTEGER	read-only	Indicates the power source.
INT receivedPoeControlPriority	1.3.6.1.4.1.3181.10.6.2.43.106.1.10	INTEGER	read-only	Priority of the attached port.
I32 receivedPoeControlPdRequestedPower	1.3.6.1.4.1.3181.10.6.2.43.106.1.11	Integer32	read-only	PD requested power value
I32 receivedPoeControlPseAllocatedPower	1.3.6.1.4.1.3181.10.6.2.43.106.1.12	Integer32	read-only	PSE allocated power value

RFC description

MICROSENS G6 LLDP MIB configuring link layer discovery protocol for neighbor identification and network topology.

Start monitoring MICROSENS Generation 6 (G6) managed Ethernet switch (LLDP/CDP neighbor discovery) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download G6-LLDP-MIB

What Is G6-LLDP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description