All MIBs › LLDP-EXT-DOT1-V2-MIB › lldpV2Xdot1ConfigProtoVlanTxEnable
lldpV2Xdot1ConfigProtoVlanTxEnable
Module: LLDP-EXT-DOT1-V2-MIB
OID (symbolic): LLDP-EXT-DOT1-V2-MIB::lldpV2Xdot1ConfigProtoVlanTxEnable
OID (numeric): 1.3.111.2.802.1.1.13.1.5.32962.1.1.3.1.1
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: The boolean value that indicates whether the corresponding Local System Port and Protocol VLAN instance is transmitted on the port defined by the given lldpV2Xdot1LocProtoVlanEntry.
The value of this object is restored from non-volatile storage after a re-initialization of the management system.
What is lldpV2Xdot1ConfigProtoVlanTxEnable?
This boolean, per-port setting decides whether the Port and Protocol VLAN TLV for a given local protocol-VLAN instance gets advertised over LLDP. Admins enable it on trunk or access ports running protocol-based VLANs so the neighboring device can see which protocols are mapped to which VLAN without manual documentation. The setting defaults to false and persists across a device reboot.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.111.2.802.1.1.13.1.5.32962.1.1.3.1.1 snmpwalk -v2c -c public <target> LLDP-EXT-DOT1-V2-MIB::lldpV2Xdot1ConfigProtoVlanTxEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.111.2.802.1.1.13.1.5.32962.1.1.3.1.1.1 snmpget -v2c -c public <target> LLDP-EXT-DOT1-V2-MIB::lldpV2Xdot1ConfigProtoVlanTxEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.111.2.802.1.1.13.1.5.32962.1.1.3.1.1.1 s <value>
Start monitoring Network device implementing IEEE 802.1AB LLDP (802.1 extension TLVs) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LLDP-EXT-DOT1-V2-MIB::lldpV2Xdot1ConfigProtoVlanTxEnable OID value, configure state conditions and alerts, and monitor any Network device implementing IEEE 802.1AB LLDP (802.1 extension TLVs) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.111.2.802.1.1 | ieee802dot1mibs | IEEE8021-TC-MIB |
| 1.3.111.2.802.1.1.13 | lldpV2MIB | LLDP-V2-MIB |
| 1.3.111.2.802.1.1.13.1 | lldpV2Objects | LLDP-V2-MIB |
| 1.3.111.2.802.1.1.13.1.5 | lldpV2Extensions | LLDP-V2-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.111.2.802.1.1.13.1.5.32962 | lldpV2Xdot1MIB | LLDP-EXT-DOT1-V2-MIB |
| 1.3.111.2.802.1.1.13.1.5.32962.1 | lldpV2Xdot1Objects | LLDP-EXT-DOT1-V2-MIB |
| 1.3.111.2.802.1.1.13.1.5.32962.1.1 | lldpV2Xdot1Config | LLDP-EXT-DOT1-V2-MIB |
| 1.3.111.2.802.1.1.13.1.5.32962.1.1.3 | lldpV2Xdot1ConfigProtoVlanTable | LLDP-EXT-DOT1-V2-MIB |
| 1.3.111.2.802.1.1.13.1.5.32962.1.1.3.1 | lldpV2Xdot1ConfigProtoVlanEntry | LLDP-EXT-DOT1-V2-MIB |
| 1.3.111.2.802.1.1.13.1.5.32962.1.1.3.1.1 | lldpV2Xdot1ConfigProtoVlanTxEnable | LLDP-EXT-DOT1-V2-MIB |