| OID symbolic | OID numeric | Type | Access | Description |
|---|
| etsysPowerEthernetMibExtMIB | 1.3.6.1.4.1.5624.1.2.50 | | | This MIB module defines a portion of the SNMP MIB under
the Enterasys Networks enterprise OID pertaining to the
allocation of power in a Pse chassis. |
| etsysPowerEthernetObjects | 1.3.6.1.4.1.5624.1.2.50.1 | | | |
| etsysPsePowerNotification | 1.3.6.1.4.1.5624.1.2.50.1.0 | | | |
| NTF etsysPseChassisPowerRedundant | 1.3.6.1.4.1.5624.1.2.50.1.0.1 | | | Pse chassis power is in redundant state. At least 500 msec
must elapse between notifications being emitted by the same
object instance. |
| NTF etsysPseChassisPowerNonRedundant | 1.3.6.1.4.1.5624.1.2.50.1.0.2 | | | Pse chassis power is in non-redundant state. At least 500
msec must elapse between notifications being emitted by the
same object instance. |
| NTF etsysPsePowerSupplyModuleStatusChange | 1.3.6.1.4.1.5624.1.2.50.1.0.3 | | | A Pse Power Supply module has changed state. At least 500
msec must elapse between notifications being emitted by the
same object instance. |
| etsysPseChassisPowerAllocation | 1.3.6.1.4.1.5624.1.2.50.1.1 | | | |
| INT etsysPseChassisPowerAllocationMode | 1.3.6.1.4.1.5624.1.2.50.1.1.1 | INTEGER | read-write | In auto mode, a Pse Power Management Algorithm handles the
allocation of power to all the modules.
In manual mode, power is manually allocated to the modules
via the etsysPseSlotPowerAllocationTable.
The value of etsysPseChassisPowerAllocationAvailable is used
to determine the power available for allocation in this
chassis in both auto and manual mode.
Maintaining the value of this object across agent reboots
is REQUIRED. |
| ENA etsysPseChassisPowerSnmpNotification | 1.3.6.1.4.1.5624.1.2.50.1.1.2 | EnabledStatus | read-write | The current state of the SNMP Notification functionality for
Pse.
enabled (1) - The Pse will generate SNMP Notifications for
potentially adverse Pse power conditions.
The generation of these notifications are NOT
dependant upon the state of
etsysPseChassisPowerAllocationMode.
disabled (2) - The SNMP Notifications defined in this MIB will
NOT be generated under any conditions.
Agents are not required to generate SNMP Notifications for
conditions that exist when this object is set to enabled.
Maintaining the value of this object across agent reboots is
REQUIRED. |
| U32 etsysPseChassisPowerAvailableMaximum | 1.3.6.1.4.1.5624.1.2.50.1.1.3 | Unsigned32 | read-write | The maximum percentage of power from the Pse Power Supply
that this chassis can use.
The default value should be 100 percent, meaning the
chassis can use all the power detected from Pse Power
Supply.
Maintaining the value of this object across agent reboots
is REQUIRED. |
| etsysPseSlotPowerAllocation | 1.3.6.1.4.1.5624.1.2.50.1.2 | | | |
| etsysPseSlotPowerAllocationTable | 1.3.6.1.4.1.5624.1.2.50.1.2.1 | | not-accessible | Power allocation management information for all slots. |
| etsysPseSlotPowerAllocationEntry | 1.3.6.1.4.1.5624.1.2.50.1.2.1.1 | | not-accessible | Power allocation management information for an entPhysicalEntry
that has an entPhysicalClass of container(5) and represents a
slot in the chassis that could be occupied by a Pse module. |
| U32 etsysPseSlotPowerMaximum | 1.3.6.1.4.1.5624.1.2.50.1.2.1.1.1 | Unsigned32 | read-only | The maximum power that can be consumed by the module in
this slot, based on the module's characteristics. For
slots without Pse modules this object MUST return zero. |
| U32 etsysPseSlotPowerAssigned | 1.3.6.1.4.1.5624.1.2.50.1.2.1.1.2 | Unsigned32 | read-write | The power that will be allocated to this slot in manual mode.
In auto mode, this object has no effect.
Maintaining the value of this object across agent reboots
is REQUIRED. |
| etsysPseChassisPowerStatus | 1.3.6.1.4.1.5624.1.2.50.1.3 | | | |
| G32 etsysPseChassisPowerDetectedEx | 1.3.6.1.4.1.5624.1.2.50.1.3.1 | Gauge32 | read-only | The total power detected by the chassis from Pse Power Supply. |
| G32 etsysPseChassisPowerAvailable | 1.3.6.1.4.1.5624.1.2.50.1.3.2 | Gauge32 | read-only | The total power available for this chassis. This is
( etsysPseChassisPowerDetected *
( etsysPseChassisPowerAvailableMaximum / 100 ) ). |
| G32 etsysPseChassisPowerConsumable | 1.3.6.1.4.1.5624.1.2.50.1.3.3 | Gauge32 | read-only | The total power that could be consumed by all of the Pse
modules in the chassis. This is the summation of the values
of all of the etsysPseSlotPowerMaximum objects. |
| U32 etsysPseChassisPowerAssigned | 1.3.6.1.4.1.5624.1.2.50.1.3.4 | Unsigned32 | read-only | The total power assigned to the slots in the chassis.
This is the summation of the values of all of the
etsysPseSlotPowerAssigned objects. |
| INT etsysPseChassisPowerRedundancy | 1.3.6.1.4.1.5624.1.2.50.1.3.5 | INTEGER | read-only | Denotes whether or not the Pse power system has redundant
capacity. |
| etsysPsePowerSupplyStatusTable | 1.3.6.1.4.1.5624.1.2.50.1.3.6 | | not-accessible | Status information for all of the Pse power supply modules. |
| etsysPsePowerSupplyStatusEntry | 1.3.6.1.4.1.5624.1.2.50.1.3.6.1 | | not-accessible | Status information for an individual Pse power supply module. |
| U32 etsysPsePowerSupplyModuleNumber | 1.3.6.1.4.1.5624.1.2.50.1.3.6.1.1 | Unsigned32 | not-accessible | A unique number that identifies the Pse power supply
and is relative to the module's physical location. |
| INT etsysPsePowerSupplyModuleStatus | 1.3.6.1.4.1.5624.1.2.50.1.3.6.1.2 | INTEGER | read-only | Denotes the power supply's status. |
| etsysPseSlotPowerManagement | 1.3.6.1.4.1.5624.1.2.50.1.4 | | | |
| etsysPseModulePowerManagementTable | 1.3.6.1.4.1.5624.1.2.50.1.4.1 | | not-accessible | This table augments the pethMainPseTable of the
PowerEthernetMIB (rfc3621). It provides objects
that are used to budget power. |
| etsysPseModulePowerManagementEntry | 1.3.6.1.4.1.5624.1.2.50.1.4.1.1 | | not-accessible | A set of objects that display, control, and calculate
the power consumption of a PSE. |
| INT etsysPseModulePowerMode | 1.3.6.1.4.1.5624.1.2.50.1.4.1.1.1 | INTEGER | read-write | This object controls the power management of the PSE.
It also controls how etsysPseModulePowerClassBudget,
etsysPseModulePowerUsage and etsysPsePortPowerLimit are
utilized.
In realtime mode, the power is managed based on the
actual power consumption of the ports.
etsysPseModulePowerClassBudget is sum of power
consumed by all ports, measured in real-time. The
etsysPseModulePowerUsage is ratio of pethMainPseConsumptionPower
over pethMainPsePower, expressed in percents.
In class mode, the power is managed based on the IEEE 802.3af
definition of the class upper limit, except classes 0 & 4
for which the actual power consumption is used.
etsysPseModulePowerClassBudget is sum of all ports
power according to their class upper bound, except classes 0 & 4
for which the actual power consumption is accounted.
The etsysPseModulePowerUsage is ratio of
etsysPseModulePowerClassBudget over pethMainPsePower, expressed
in percents.
The effect of etsysPseModulePowerMode to etsysPsePortPowerLimit is
described in etsysPsePortPowerLimit definition.
Maintaining the value of this object across agent reboots
is REQUIRED. |
| G32 etsysPseModulePowerClassBudget | 1.3.6.1.4.1.5624.1.2.50.1.4.1.1.2 | Gauge32 | read-only | In class mode, this is sum of all ports power according to
their class upper bound, except classes 0 & 4 for which the
actual power consumption is accounted. In realtime mode,
this is sum of power consumed by all ports, measured in
real-time. |
| I32 etsysPseModulePowerUsage | 1.3.6.1.4.1.5624.1.2.50.1.4.1.1.3 | Integer32 | read-only | In class mode, this is ratio of etsysPseModulePowerClassBudget
over pethMainPsePower, expressed in percents.
In realtime mode, this is ratio of pethMainPseConsumptionPower
over pethMainPsePower, expressed in percents. |
| etsysPsePortPowerManagement | 1.3.6.1.4.1.5624.1.2.50.1.5 | | | |
| etsysPsePortPowerManagementTable | 1.3.6.1.4.1.5624.1.2.50.1.5.1 | | not-accessible | This table augments the pethPsePortTable of the
PowerEthernetMIB (rfc3621). It provides objects
that are used to budget power. |
| etsysPsePortPowerManagementEntry | 1.3.6.1.4.1.5624.1.2.50.1.5.1.1 | | not-accessible | A set of objects that display and control the power
consumption of a PSE, at the port level. |
| I32 etsysPsePortPowerLimit | 1.3.6.1.4.1.5624.1.2.50.1.5.1.1.1 | Integer32 | read-write | This object sets the maximum power allowed on this port.
If the port exceeds its power limit, it will be shut down.
This object has effect only when its module is in realtime
mode (specified by etsysPseModulePowerMode). In class mode,
the power limit of a port is defined by port's class upper
bound, according to the IEEE standard selected in
etsysPsePortCapabilitySelect. |
| G32 etsysPsePortPowerUsage | 1.3.6.1.4.1.5624.1.2.50.1.5.1.1.2 | Gauge32 | read-only | Actual power consumption measured in real-time. |
| INT etsysPsePortPDType | 1.3.6.1.4.1.5624.1.2.50.1.5.1.1.3 | INTEGER | read-only | Describes the detected PD type on this port.
A value of legacy(1) - indicates that the PD is using a
capacitive signature, which is pre-IEEE standard.
A value of ieee8023af(2)- indicates that the PD is using a
resistive signature and is compliant with the IEEE Std 802.3af.
A value of other(3) - indicates that the PD type could not be
determined.
A value of ieee8023(4)- indicates that the PD is using a
resistive signature and is compliant with the IEEE Std 802.3af
and/or IEEE Std 802.3at specifications.
A value of ieee8023at(5)- indicates that the PD is using a
resistive signature and is compliant with the IEEE Std 802.3at. |
| BIT etsysPsePortCapability | 1.3.6.1.4.1.5624.1.2.50.1.5.1.1.4 | Bits | read-only | This object indicates the IEEE Power over Ethernet standard
this port supports. |
| INT etsysPsePortCapabilitySelect | 1.3.6.1.4.1.5624.1.2.50.1.5.1.1.5 | INTEGER | read-write | This object sets the port's power management capabilities
based on the IEEE standard.
ieee8023af (1) : IEEE Std 802.3af
ieee8023at (2) : IEEE Std 802.3at
Attempting to set this value to a capability that is not
supported, as indicated by etsysPsePortCapability, will result
in an inconsistentValue error. |
| INT etsysPsePortDetectionStatus | 1.3.6.1.4.1.5624.1.2.50.1.5.1.1.6 | INTEGER | read-only | Describes the operational status of the port PD detection.
A value of disabled(1)- indicates that the PSE State diagram
is in the state DISABLED.
A value of deliveringPower(3) - indicates that the PSE State
diagram is in the state POWER_ON for a duration greater than
tlim max.
A value of fault(4) - indicates that the PSE State diagram is
in the state TEST_ERROR.
A value of test(5) - indicates that the PSE State diagram is
in the state TEST_MODE.
A value of otherFault(6) - indicates that the PSE State
diagram is in the state IDLE due to the variable
error_conditions.
A value of searching(2)- indicates the PSE State diagram is
in a state other than those listed above.
A value of requestingPower(7) - indicates the PSE State diagram
is in the state IDLE after transitioning from the state
POWER_DENIED due to insufficient PSE power being available to
satisfy the PD's requirements. |
| etsysPsePowerAllocationConformance | 1.3.6.1.4.1.5624.1.2.50.2 | | | |
| etsysPsePowerAllocationGroups | 1.3.6.1.4.1.5624.1.2.50.2.1 | | | |
| etsysPsePowerAllocationControlGroup | 1.3.6.1.4.1.5624.1.2.50.2.1.1 | | | Power over Ethernet Power Allocation Control group. |
| etsysPseChassisPowerStatusGroup | 1.3.6.1.4.1.5624.1.2.50.2.1.2 | | | Power over Ethernet Power Supply group. |
| etsysPsePowerNotificationGroup | 1.3.6.1.4.1.5624.1.2.50.2.1.3 | | | Power over Ethernet Power Redundancy Notifications group. |
| etsysPseModulePowerManagementGroup | 1.3.6.1.4.1.5624.1.2.50.2.1.4 | | | Power over Ethernet Module Power Budget Management group. |
| etsysPsePortPowerManagementGroup | 1.3.6.1.4.1.5624.1.2.50.2.1.5 | | | Power over Ethernet Port Power Budget Management group. |
| etsysPsePortPowerManagementGroupRev2 | 1.3.6.1.4.1.5624.1.2.50.2.1.6 | | | Power over Ethernet Port Power Budget Management group. |
| etsysPsePowerAllocationCompliances | 1.3.6.1.4.1.5624.1.2.50.2.2 | | | |
| etsysPsePowerAllocationCompliance | 1.3.6.1.4.1.5624.1.2.50.2.2.1 | | | The compliance statement for devices that support manual
power allocation. |
| etsysPsePowerAllocationCompliance2 | 1.3.6.1.4.1.5624.1.2.50.2.2.2 | | | The compliance statement for devices that support
power budgets. |
| etsysPsePowerAllocationCompliance2Rev2 | 1.3.6.1.4.1.5624.1.2.50.2.2.3 | | | The compliance statement for devices that support
power budgets. |
