All MIBs › ENTERASYS-CLASS-OF-SERVICE-MIB
Organization: Enterasys Networks, Inc.
Last Updated: 2008-02-13
Category: Technology: QoS, Vendor: Enterasys/Cabletron
Description: Enterasys Networks MIB for configuring transmission and reception class-of-service attributes on network edge devices.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ENTERASYS-CLASS-OF-SERVICE-MIB?
ENTERASYS-CLASS-OF-SERVICE-MIB is a private Enterasys Networks MIB for configuring and monitoring class-of-service (CoS) attributes—transmission and reception priority mappings such as 802.1p and ToS/DSCP handling—on Enterasys edge and access network devices. It exposes a table of per-entry CoS mappings along with capability and enable-state indicators, plus a notification for resets. Its monitoring relevance is chiefly configuration-status oriented: administrators can confirm which CoS policies are active, how many entries are configured versus the device's maximum capacity, and when the CoS subsystem was last changed, which is useful for verifying QoS configuration integrity on the switch. It functions as a standalone private extension without an explicit dependency on other standard MIBs beyond general SNMPv2 conventions. It is deployed on Enterasys switches and edge/access products where administrators need to enforce consistent QoS/CoS marking policies across the network. Engineers can download the ENTERASYS-CLASS-OF-SERVICE-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ENTERASYS-CLASS-OF-SERVICE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Enterasys Networks edge/access switch
Monitoring Examples
An administrator would poll etsysCosNumEntries against etsysCosMaxEntries to confirm the CoS table isn't near its configured capacity, and check etsysCosLastChange to detect recent unauthorized or unexpected CoS policy edits. Within etsysCosTable, indexed by etsysCosIndex, fields like etsysCos8021dPriority and etsysCosTosValue reveal the specific priority-to-ToS mapping configured for each entry, and etsysCosEnableState confirms whether CoS enforcement is currently active on the device, while the etsysCosMasterReset notification would alert an operator if the CoS configuration was reset to defaults.
What Can Be Monitored
- CoS table entry count vs. maximum capacity
- 802.1p priority to ToS/DSCP mapping per entry
- CoS enable state
- last CoS configuration change time
- CoS master reset events
This MIB depends on
Related MIBs
Imported Objects
From BRIDGE-MIB
| dot1dBasePort | OBJECT-TYPE |
From ENTERASYS-MIB-NAMES
| etsysModules | OBJECT-IDENTITY |
From IF-MIB
| ifName | OBJECT-TYPE |
From P-BRIDGE-MIB
| EnabledStatus |
From Q-BRIDGE-MIB
| PortList |
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter64 | |
| Gauge32 | |
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TimeStamp | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| etsysCosMIB | 1.3.6.1.4.1.5624.1.2.55 | This MIB module defines a portion of the SNMP enterprise MIBs under the Enterasys enterprise OID pertaining to the configuration and application of transmission and reception attributes that comprise class of service for Enterasys network edge devices or access products. | ||
| etsysCosObjects | 1.3.6.1.4.1.5624.1.2.55.1 | |||
| etsysCosNotifications | 1.3.6.1.4.1.5624.1.2.55.1.0 | |||
| NTF etsysCosIrlExceededNotification | 1.3.6.1.4.1.5624.1.2.55.1.0.1 | This notification indicates an inbound limiter has been exceeded. | ||
| NTF etsysCosOrlExceededNotification | 1.3.6.1.4.1.5624.1.2.55.1.0.2 | This notification indicates an outbound limiter has been exceeded. | ||
| NTF etsysCosFloodLimitExceededNotification | 1.3.6.1.4.1.5624.1.2.55.1.0.3 | This notification indicates an inbound flood limiter has been exceeded. | ||
| etsysCosMasterReset | 1.3.6.1.4.1.5624.1.2.55.1.1 | |||
| T/F etsysCosMibObjectAnullingBehavior | 1.3.6.1.4.1.5624.1.2.55.1.1.1 | TruthValue | read-write | This object SHALL always read false. Setting this object to true MUST remove all existing entries from all tables in all subordinate objects of etsysCosObjects, and nullify all changes to any values. The resulting behavior should yield an unconfigured etsysCosMIB. |
| etsysCosCapabilities | 1.3.6.1.4.1.5624.1.2.55.1.2 | |||
| BIT etsysCosCapability | 1.3.6.1.4.1.5624.1.2.55.1.2.1 | Bits | read-only | A list of capabilities related to class of service support. A set bit, with the value 1, indicates support for the described functionality. A clear bit, with the value 0, indicates the described functionality is not supported. |
| etsysCos | 1.3.6.1.4.1.5624.1.2.55.1.3 | |||
| U32 etsysCosMaxEntries | 1.3.6.1.4.1.5624.1.2.55.1.3.1 | Unsigned32 | read-only | The maximum number of entries allowed in the etsysCosTable. |
| G32 etsysCosNumEntries | 1.3.6.1.4.1.5624.1.2.55.1.3.2 | Gauge32 | read-only | The current number of entries in the etsysCosTable. |
| TIM etsysCosLastChange | 1.3.6.1.4.1.5624.1.2.55.1.3.3 | TimeStamp | read-only | The time at which the etsysCos Table was last modified. |
| ENA etsysCosEnableState | 1.3.6.1.4.1.5624.1.2.55.1.3.4 | EnabledStatus | read-write | If enabled(1), controls configured for this MIB supersede controls for portions of BRIDGE-MIB dealing with priority queue mapping, all of the CTRON-RATE-POLICING-MIB and all of the CTRON-TX-QUEUE-ARBITRATION-MIB. A setting to disabled(2) from enabled(1), results in the restoration of any existing configurations from the aforementioned MIBs. |
| etsysCosTable | 1.3.6.1.4.1.5624.1.2.55.1.3.5 | not-accessible | A table containing class of service settings to be applied to a dot1dBridge port or port groups. | |
| etsysCosEntry | 1.3.6.1.4.1.5624.1.2.55.1.3.5.1 | not-accessible | Conceptually defines a particular entry within the etsysCosTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. | |
| U32 etsysCosIndex | 1.3.6.1.4.1.5624.1.2.55.1.3.5.1.1 | Unsigned32 | not-accessible | A unique class of service identifier for this CoS setting. For reasons of backward compatibility indexes 0-7 MUST exist and be configured with a etsysCos8021dPriority which matches the etsysCosIndex. |
| ROW etsysCosRowStatus | 1.3.6.1.4.1.5624.1.2.55.1.3.5.1.2 | RowStatus | read-create | This object allows for the dynamic creation and deletion of entries within the etsysCosTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. |
| I32 etsysCos8021dPriority | 1.3.6.1.4.1.5624.1.2.55.1.3.5.1.3 | Integer32 | read-create | The 802.1D priority to be associated with this Class of Service. If this field is returned as (-1) then it has not been configured and no action will be taken for this attribute. |
| OCT etsysCosTosValue | 1.3.6.1.4.1.5624.1.2.55.1.3.5.1.4 | OCTET STRING | read-create | The Type of Service or Differentiated Services Code Point value and mask to be associated with this Class of Service. If this field is returned as , then it has not been configured and no action will be taken for this attribute. The first octet shall represent the TOS/DSCP value and the second octet shall represent the mask applied to that value. Agents that do not support masking shall fail sets to this object that include a mask octet. |
| I32 etsysCosTxqReference | 1.3.6.1.4.1.5624.1.2.55.1.3.5.1.5 | Integer32 | read-create | The transmit queue table instance to reference for this Class of Service. |
| I32 etsysCosIrlReference | 1.3.6.1.4.1.5624.1.2.55.1.3.5.1.6 | Integer32 | read-create | The inbound rate limiting table instance to reference for this Class of Service. If this instance is returned as (-1), no action will be taken for this attribute. |
| I32 etsysCosOrlReference | 1.3.6.1.4.1.5624.1.2.55.1.3.5.1.7 | Integer32 | read-create | The outbound rate limiting table instance to reference for this Class of Service. If this instance is returned as (-1), no action will be taken for this attribute. |
| I32 etsysCosDropPrecedence | 1.3.6.1.4.1.5624.1.2.55.1.3.5.1.8 | Integer32 | read-create | The drop precedence default action. If this field is returned as (-1) then it has not been configured and no action will be taken for this attribute. If unsupported the agent may optionally implement this leaf as read-only. |
| ENA etsysCosFloodControlStatus | 1.3.6.1.4.1.5624.1.2.55.1.3.5.1.9 | EnabledStatus | read-create | Controls whether flooded traffic will be rate limited based on configuration in the etsysCosFloodControl groups. |
| etsysCosTxq | 1.3.6.1.4.1.5624.1.2.55.1.4 | |||
| I32 etsysCosTxqNumPortTypes | 1.3.6.1.4.1.5624.1.2.55.1.4.1 | Integer32 | read-only | The actual number of distinctly unique (as defined by the set of shared Transmit Queue capabilities) port types available for configuration on this agent. |
| etsysCosTxqPortTypeTable | 1.3.6.1.4.1.5624.1.2.55.1.4.2 | not-accessible | A table defining the distinctly unique transmit queue characteristics of a group of ports. | |
| etsysCosTxqPortTypeEntry | 1.3.6.1.4.1.5624.1.2.55.1.4.2.1 | not-accessible | Conceptually defines a particular entry within the etsysCosTxqPortTypeTable. | |
| I32 etsysCosTxqPortTypeIndex | 1.3.6.1.4.1.5624.1.2.55.1.4.2.1.1 | Integer32 | not-accessible | The port type associated with the unique set of ports sharing these capabilities. |
| STR etsysCosTxqPortTypeDescr | 1.3.6.1.4.1.5624.1.2.55.1.4.2.1.2 | SnmpAdminString | read-only | The textual description that represents this set of dot1dBridge ports. |
| POR etsysCosTxqPortTypeEligiblePorts | 1.3.6.1.4.1.5624.1.2.55.1.4.2.1.3 | PortList | read-only | The list of dot1dBridge ports belonging (having the same capabilities) to this port type. |
| POR etsysCosTxqPortTypeUnselectedPorts | 1.3.6.1.4.1.5624.1.2.55.1.4.2.1.4 | PortList | read-only | The list of dot1dBridge ports not yet bound to a user created row (port group) in the etsysCosTxqPortGroupTable. |
| I32 etsysCosTxqPortTypeNumberOfQueues | 1.3.6.1.4.1.5624.1.2.55.1.4.2.1.5 | Integer32 | read-only | The number of queues available for configuration by this agent on this type of port. |
| ETS etsysCosTxqPortTypeSupportedRateTypes | 1.3.6.1.4.1.5624.1.2.55.1.4.2.1.6 | EtsysCosRateTypes | read-only | The rate types available for use in these settings. |
| I32 etsysCosTxqPortTypeNumberOfSlices | 1.3.6.1.4.1.5624.1.2.55.1.4.2.1.7 | Integer32 | read-only | The number of slices available for configuration. |
| TXQ etsysCosTxqPortTypeQueueAlgorithms | 1.3.6.1.4.1.5624.1.2.55.1.4.2.1.8 | TxqAlgorithms | read-only | The queuing algorithms available for use with these settings. |
| TXQ etsysCosTxqPortTypeQueueArbiterModes | 1.3.6.1.4.1.5624.1.2.55.1.4.2.1.9 | TxqArbiterModes | read-only | The arbitration modes available for use with these setting. |
| U32 etsysCosTxqPortTypeMaxDropPrecedence | 1.3.6.1.4.1.5624.1.2.55.1.4.2.1.10 | Unsigned32 | read-only | The maximum drop precedence allowed on this port type. |
| TXQ etsysCosTxqPortTypeLLQEligibleQueues | 1.3.6.1.4.1.5624.1.2.55.1.4.2.1.11 | TxQueueList | read-only | The queues eligible for low latency queue configuration. |
| etsysCosTxqUnitTable | 1.3.6.1.4.1.5624.1.2.55.1.4.3 | not-accessible | A table containing the rate type, minimum and maximum limits of the port groups and their respective granularity. | |
| etsysCosTxqUnitEntry | 1.3.6.1.4.1.5624.1.2.55.1.4.3.1 | not-accessible | Conceptually defines a particular entry within the etsysCosTxqUnitTable. Entries in this table indicate the port group boundaries for the type of port specified. | |
| ETS etsysCosTxqUnitTypeIndex | 1.3.6.1.4.1.5624.1.2.55.1.4.3.1.1 | EtsysCosRateTypes | not-accessible | The unit identifier for this port type. The metric at which the etsysCosTxqUnitMinRate, etsysCosTxqUnitMaxRate and etsysCosTxqUnitGranularity are applied. |
| U32 etsysCosTxqUnitMaxRate | 1.3.6.1.4.1.5624.1.2.55.1.4.3.1.2 | Unsigned32 | read-only | The maximum rate supported at the rate of units specified by etsysCosTxqUnitTypeIndex. |
| U32 etsysCosTxqUnitMinRate | 1.3.6.1.4.1.5624.1.2.55.1.4.3.1.3 | Unsigned32 | read-only | The minimum rate supported at the rate of units specified by etsysCosTxqUnitTypeIndex. |
| U32 etsysCosTxqUnitGranularity | 1.3.6.1.4.1.5624.1.2.55.1.4.3.1.4 | Unsigned32 | read-only | The smallest unit by which a rate can be modified. |
| U32 etsysCosTxqMaxPortGroups | 1.3.6.1.4.1.5624.1.2.55.1.4.4 | Unsigned32 | read-only | The maximum number of port groups supported by this agent. |
| G32 etsysCosTxqNumPortGroups | 1.3.6.1.4.1.5624.1.2.55.1.4.5 | Gauge32 | read-only | The number of assigned dot1dBridge port groups present in this agent. This number also reflects the port groups with a default system setup indicated by a zero(0) index. |
| TIM etsysCosTxqPortGroupLastChange | 1.3.6.1.4.1.5624.1.2.55.1.4.6 | TimeStamp | read-only | The time at which the etsysCosTxqPortTable was last modified. |
| etsysCosTxqPortGroupTable | 1.3.6.1.4.1.5624.1.2.55.1.4.7 | not-accessible | A table containing the user settings for specific types of ports and their matching transmit queue configurations. | |
| etsysCosTxqPortGroupEntry | 1.3.6.1.4.1.5624.1.2.55.1.4.7.1 | not-accessible | Conceptually defines a particular entry within the etsysCosTxqPortTypeTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. | |
| I32 etsysCosTxqPortGroupIndex | 1.3.6.1.4.1.5624.1.2.55.1.4.7.1.1 | Integer32 | not-accessible | The user-specified port group for which the settings are defined. This value MAY have meaning to the user for the purposes of identifying groups of dot1dBridge ports with similar function (uplink, user, etc). A value of zero(0) has special meaning in that it identifies the default port grouping of characteristics present in the agent. Entries indexed by a zero have a max-access of read-only. This value will have a system defined maximum of etsysCosTxqMaxPortGroups. |
| ROW etsysCosTxqPortGroupRowStatus | 1.3.6.1.4.1.5624.1.2.55.1.4.7.1.2 | RowStatus | read-create | This object allows for the dynamic creation and deletion of entries within the etsysCosTxqPortTypeTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. When this object's value is active(1) the specified dot1dBridge ports listed in the etsysCosTxqPortGroupList shall be removed from etsysCosTxqPortGroupUnselectedPorts. A row in transition to the active(1) state will have its port group list validated before activation. A port list that cannot be made active MUST result in the row state to become notReady(3) and no configuration action will be taken for this row. Rows not in the active(1) state SHALL NOT be persisted across entity resets and MUST return the ports from its port group list to the etsysCosTxqPortGroupUnselectedPorts. When this object's value is set to destroy(6) from an active(1) state, all ports contained in etsysCosTxqPortList shall be returned to the etsysCosTxqPortGroupUnselectedPorts and all entries referencing this row shall be removed as well. |
| POR etsysCosTxqPortGroupList | 1.3.6.1.4.1.5624.1.2.55.1.4.7.1.3 | PortList | read-create | The list of dot1dBridge ports to be assigned to this group. Ports in this list MUST : o Be mutually exclusive from other entries in this table o Be comprised of the same port type as defined by the etsysCosTxqPortTypeIndex. |
| STR etsysCosTxqPortGroupName | 1.3.6.1.4.1.5624.1.2.55.1.4.7.1.4 | SnmpAdminString | read-create | The administratively assigned textual description of this port group. |
| etsysCosTxqPortCfgTable | 1.3.6.1.4.1.5624.1.2.55.1.4.8 | not-accessible | A table containing the queue values to be used in the entries specified. Rows in this table are populated based on rowCreation in the etsysCosTxqPortGroupTable. Changes to this table are reflected in the etsysCosTxqPortGroupLastChange value. | |
| etsysCosTxqPortCfgEntry | 1.3.6.1.4.1.5624.1.2.55.1.4.8.1 | not-accessible | Conceptually defines a particular entry within the etsysCosTxqPortCfgTable. Details contained within this entry will depict the slice distributions across each queue per dot1dBridge port, as well as determine the arbiter's method for servicing the queues. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. | |
| TXQ etsysCosTxqPortArbMode | 1.3.6.1.4.1.5624.1.2.55.1.4.8.1.1 | TxqArbiterModes | read-only | The mode in which the transmit queue arbiter services the queues. When in strict-mode, the queues will be services by numerical priority from lowest to highest. Lower priority queues will not be services until the current queue is drained. When set to weightedFairQ, the number of slices in a particular queue determines the frequency of servicing. A slice configuration of 00-00...100 will set the port to strict-mode. |
| OCT etsysCosTxqPortSliceSetting | 1.3.6.1.4.1.5624.1.2.55.1.4.8.1.2 | OCTET STRING | read-write | This object is an octet string in which the number of octets corresponds to the number of transmit queues for each dot1dBridge port. The value of the first octet represents the number of 'slices' of transmit resources to allocate to Queue 0, the second octet represents the number for Queue 1, and so forth. The sum of all the octets in the octet string must add up to the total number of slices available for that port type as defined in etsysCosTxqNumberOfSlices. For example, on a port having 4 transmit queues and where transmit resources are divided into 16 slices, writing an octet string of {0x00, 0x04, 0x04, 0x08} would have the following effect: At least 50% of the frames transmitted are from Queue 3 At least 25% of the frames transmitted are from Queue 2 At least 25% of the frames transmitted are from Queue 1 No frames will be transmitted from Queue 0 until Queues 1, 2 and 3 are empty. |
| etsysCosTxqResourceTable | 1.3.6.1.4.1.5624.1.2.55.1.4.9 | not-accessible | A table containing rate, units and queuing algorithm to be used in the entries specified. | |
| etsysCosTxqResourceEntry | 1.3.6.1.4.1.5624.1.2.55.1.4.9.1 | not-accessible | Conceptually defines a particular entry within the etsysCosTxqResourceTable. These entries contain the specific attributes of transmission rates (traffic shaping) and dropping styles to be applied to dot1dBridge ports. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. | |
| I32 etsysCosTxqResourceQueueNum | 1.3.6.1.4.1.5624.1.2.55.1.4.9.1.1 | Integer32 | not-accessible | The queue number associated with this entry. |
| ETS etsysCosTxqPortQUnit | 1.3.6.1.4.1.5624.1.2.55.1.4.9.1.2 | EtsysCosRateTypes | read-write | Identifies the unit size for the etsysCosTxqPortRate. Values MUST NOT exceed the capacity of the etsysCosTxqPortType they are associated with. |
| I32 etsysCosTxqPortQRate | 1.3.6.1.4.1.5624.1.2.55.1.4.9.1.3 | Integer32 | read-write | Identifies the number of units used in this queue configuration. The value (0) shall carry special meaning that indicates the settings MUST NOT be applied to the queue. |
| TXQ etsysCosTxqPortQAlgorithm | 1.3.6.1.4.1.5624.1.2.55.1.4.9.1.4 | TxqAlgorithms | read-write | Determines the rules by which discarding is applied. |
| ENA etsysCosTxqPortQLLQenable | 1.3.6.1.4.1.5624.1.2.55.1.4.9.1.5 | EnabledStatus | read-write | This object represents the requested use of low latency queues for this dot1dBridge port. This object is REQUIRED to fail set attempts for unsupported hardware. |
| U32 etsysCosTxqReferenceMappingMaxReference | 1.3.6.1.4.1.5624.1.2.55.1.4.10 | Unsigned32 | read-only | The maximum number of etsysCosTxqReferences allowed in the etsysCosTxqMappingTable. |
| etsysCosTxqReferenceMappingTable | 1.3.6.1.4.1.5624.1.2.55.1.4.11 | not-accessible | A table containing the user defined mappings of the TxQ refences found in the etsysCosTable to physical transmit queues associated with the specified port-group. | |
| etsysCosTxqReferenceMappingEntry | 1.3.6.1.4.1.5624.1.2.55.1.4.11.1 | not-accessible | Conceptually defines a particular entry within the etsysCosTxqReferenceMappingTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. | |
| I32 etsysCosTxqResourceQueueNumber | 1.3.6.1.4.1.5624.1.2.55.1.4.11.1.1 | Integer32 | read-write | The queue number to be bound to this reference. |
| U32 etsysCosTxqDropProfilesMaxEntries | 1.3.6.1.4.1.5624.1.2.55.1.4.12 | Unsigned32 | read-only | The maximum number of entries allowed in the etsysCosDropProfiles Table. |
| G32 etsysCosTxqDropProfilesNumEntries | 1.3.6.1.4.1.5624.1.2.55.1.4.13 | Gauge32 | read-only | The current number of entries in the etsysCosQueueProfiles Table. |
| TIM etsysCosTxqDropProfilesLastChange | 1.3.6.1.4.1.5624.1.2.55.1.4.14 | TimeStamp | read-only | The time at which the etsysCosQueueProfiles Table was last modified. |
| etsysCosTxqDropProfilesTable | 1.3.6.1.4.1.5624.1.2.55.1.4.15 | not-accessible | A table containing the queue profile configurations. | |
| etsysCosTxqDropProfilesEntry | 1.3.6.1.4.1.5624.1.2.55.1.4.15.1 | not-accessible | The minimum and maximum queue depth, maximum drop probability and queue depth at max drop probability for the queue specified. These entries represent the currently configured settings for this agent. Entries indexed with (0) are default system entries. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. | |
| U32 etsysCosTxqDropSettingIndex | 1.3.6.1.4.1.5624.1.2.55.1.4.15.1.1 | Unsigned32 | not-accessible | A unique identifier for this queue setting. Identifiers with an index of 0 MUST be read-only and depict the system default settings. |
| ROW etsysCosTxqDropProfilesRowStatus | 1.3.6.1.4.1.5624.1.2.55.1.4.15.1.2 | RowStatus | read-create | This object allows for the dynamic creation and deletion of entries within the etsysCosTxqDropProfilesTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. |
| I32 etsysCosTxqDropProfilesMin | 1.3.6.1.4.1.5624.1.2.55.1.4.15.1.3 | Integer32 | read-create | The minimum percentage of the queue depth, above which frames will dropped at the drop probability rate. |
| I32 etsysCosTxqDropProfilesMax | 1.3.6.1.4.1.5624.1.2.55.1.4.15.1.4 | Integer32 | read-create | The maximum percentage of the queue depth, above which all frames will be dropped. This object's value MUST be greater than or equal to the etsysCosTxqDropProfilesMin. |
| I32 etsysCosTxqDropProfilesMaxDropProb | 1.3.6.1.4.1.5624.1.2.55.1.4.15.1.5 | Integer32 | read-create | The drop probability associated with this setting by percentage. This number represents the percentage of traffic that will be dropped once the minimum rate has been exceeded. |
| I32 etsysCosTxqDropProfilesQueueDepthAtMaxProb | 1.3.6.1.4.1.5624.1.2.55.1.4.15.1.6 | Integer32 | read-create | The drop probability percentage slope which defines how aggressively packets are discarded as the queue fills. |
| etsysCosTxqDropPrecedenceTable | 1.3.6.1.4.1.5624.1.2.55.1.4.16 | not-accessible | A table containing the drop precedence configurations. | |
| etsysCosTxqDropPrecedenceEntry | 1.3.6.1.4.1.5624.1.2.55.1.4.16.1 | not-accessible | The drop precedence definitions for the queue specified. | |
| U32 etsysCosTableDropPrecedence | 1.3.6.1.4.1.5624.1.2.55.1.4.16.1.1 | Unsigned32 | not-accessible | The corresponding etsysCosDropPrecedence from the etsysCosTable this entry refers to. |
| I32 etsysCosTxqDropProfileQueueCfgID | 1.3.6.1.4.1.5624.1.2.55.1.4.16.1.2 | Integer32 | read-write | The etsysCosTxqDropProfilesEntry that describes the configuration for this entry. If this value references a non-existent row in the etsysCosTxqDropPrecedenceTable the device will behave as if the row existed and was populated with default parameters. |
| etsysCosIrl | 1.3.6.1.4.1.5624.1.2.55.1.5 | |||
| U32 etsysCosIrlPortTypeMaxEntries | 1.3.6.1.4.1.5624.1.2.55.1.5.1 | Unsigned32 | read-only | The actual number of distinctly unique (as defined by the set of shared inbound RateLimiting capabilities) port types available for configuration on this agent. |
| etsysCosIrlPortTypeTable | 1.3.6.1.4.1.5624.1.2.55.1.5.2 | not-accessible | A table defining the distinctly unique IRL characteristics of a group of ports. | |
| etsysCosIrlPortTypeEntry | 1.3.6.1.4.1.5624.1.2.55.1.5.2.1 | not-accessible | Conceptually defines a particular entry within the etsysCosIrlPortTypeTable. | |
| I32 etsysCosIrlPortTypeIndex | 1.3.6.1.4.1.5624.1.2.55.1.5.2.1.1 | Integer32 | not-accessible | The port type associated with the unique set of ports sharing these capabilities. |
| STR etsysCosIrlPortTypeDescr | 1.3.6.1.4.1.5624.1.2.55.1.5.2.1.2 | SnmpAdminString | read-only | The textual description that represents this set of dot1dBridge ports. |
| POR etsysCosIrlPortTypeEligiblePorts | 1.3.6.1.4.1.5624.1.2.55.1.5.2.1.3 | PortList | read-only | The list of dot1dBridge ports belonging (having the same capabilities) to this port type. |
| POR etsysCosIrlPortTypeUnselectedPorts | 1.3.6.1.4.1.5624.1.2.55.1.5.2.1.4 | PortList | read-only | The list of dot1dBridge ports not yet bound to a user created row (port group) in the etsysCosIrlPortGroupTable. |
| I32 etsysCosIrlPortTypeNumberOfIRLs | 1.3.6.1.4.1.5624.1.2.55.1.5.2.1.5 | Integer32 | read-only | The maximum number of inbound rate limiters supported by this agent on this type of port. |
| ETS etsysCosIrlPortTypeSupportedRateTypes | 1.3.6.1.4.1.5624.1.2.55.1.5.2.1.6 | EtsysCosRateTypes | read-only | The rate types available on this type of port. |
| ETS etsysCosIrlPortTypeCapabilities | 1.3.6.1.4.1.5624.1.2.55.1.5.2.1.7 | EtsysCosRlCapabilities | read-only | The EtsysCosRlCapabilities available on this type of port. |
| etsysCosIrlUnitTable | 1.3.6.1.4.1.5624.1.2.55.1.5.3 | not-accessible | A table containing the rate type, minimum and maximum limits of the port groups and their respective granularity. | |
| etsysCosIrlUnitEntry | 1.3.6.1.4.1.5624.1.2.55.1.5.3.1 | not-accessible | Conceptually defines a particular entry within the etsysCosIrlUnitTable. Entries in this table indicate the port group boundaries for the type of port specified. | |
| ETS etsysCosIrlUnitTypeIndex | 1.3.6.1.4.1.5624.1.2.55.1.5.3.1.1 | EtsysCosRateTypes | not-accessible | The unit identifier for this port type. The metric at which the etsysCosIrlUnitMinRate, etsysCosIrlUnitMaxRate and etsysCosIrlUnitGranularity are applied. |
| U32 etsysCosIrlUnitMaxRate | 1.3.6.1.4.1.5624.1.2.55.1.5.3.1.2 | Unsigned32 | read-only | The maximum rate supported at the rate of units specified by etsysCosIrlUnitType. |
| U32 etsysCosIrlUnitMinRate | 1.3.6.1.4.1.5624.1.2.55.1.5.3.1.3 | Unsigned32 | read-only | The minimum rate supported at the rate of units specified by etsysCosIrlUnitType. |
| U32 etsysCosIrlUnitGranularity | 1.3.6.1.4.1.5624.1.2.55.1.5.3.1.4 | Unsigned32 | read-only | The smallest unit by which a rate can be modified. |
| U32 etsysCosIrlPortGroupMaxEntries | 1.3.6.1.4.1.5624.1.2.55.1.5.4 | Unsigned32 | read-only | The maximum number of port groups supported by this agent. |
| G32 etsysCosIrlPortGroupNumEntries | 1.3.6.1.4.1.5624.1.2.55.1.5.5 | Gauge32 | read-only | The number of assigned dot1dBridge port groups present in this agent. This number also reflects the port groups with a default system setup indicated by a zero(0) index. |
| TIM etsysCosIrlPortGroupLastChange | 1.3.6.1.4.1.5624.1.2.55.1.5.6 | TimeStamp | read-only | The time at which the etsysCosIrlPortTypeTable was last modified. |
| etsysCosIrlPortGroupTable | 1.3.6.1.4.1.5624.1.2.55.1.5.7 | not-accessible | A table containing the settings for specific types of dot1dBridge ports and their matching inbound rate limiting configurations. | |
| etsysCosIrlPortGroupEntry | 1.3.6.1.4.1.5624.1.2.55.1.5.7.1 | not-accessible | Conceptually defines a particular entry within the etsysCosIrlPortTypeTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. | |
| I32 etsysCosIrlPortGroupIndex | 1.3.6.1.4.1.5624.1.2.55.1.5.7.1.1 | Integer32 | not-accessible | The user-specified port group for which the settings are defined. This value MAY have meaning to the user for the purposes of identifying groups of dot1dBridge ports with similar function (uplink, user, etc). A value of zero(0) has special meaning in that it identifies the default port grouping of characteristics present in the agent. Entries indexed by a zero have a max-access of read-only. This value will have a system defined maximum of etsysCosIrlPortGroupMaxEntries. |
| ROW etsysCosIrlPortGroupRowStatus | 1.3.6.1.4.1.5624.1.2.55.1.5.7.1.2 | RowStatus | read-create | This object allows for the dynamic creation and deletion of entries within the etsysCosIrlPortGroupTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. When this object's value is active(1) the specified dot1dBridge ports listed in the PortGroupList shall be removed from UnselectedPorts. A row in transition to the active(1) state will have its port group list validated before activation. A port list that cannot be made active MUST result in the row state to become notReady(3) and no configuration action will be taken for this row. Rows not in the active(1) state SHALL NOT be persisted across entity resets and MUST return the ports from its port group list to the etsysCosIrlPortTypeUnselectedPorts. When this object's value is set to destroy(6) from an active(1) state, all dot1dBridge ports contained in etsysCosIrlPortGroupList shall be returned to the etsysCosIrlPortTypeUnselectedPorts and all entries referencing this row shall be removed as well. |
| POR etsysCosIrlPortGroupList | 1.3.6.1.4.1.5624.1.2.55.1.5.7.1.3 | PortList | read-write | The list of dot1dBridge ports to be assigned to this group. Ports in this list MUST : o Be mutually exclusive from other entries in this table o Be comprised of the same port type as defined by the etsysCosIrlPortTypeIndex. |
| STR etsysCosIrlPortGroupName | 1.3.6.1.4.1.5624.1.2.55.1.5.7.1.4 | SnmpAdminString | read-write | The administratively assigned textual description of this port group. |
| etsysCosIrlPortCfgTable | 1.3.6.1.4.1.5624.1.2.55.1.5.8 | not-accessible | A table containing the inbound rate limiting configurations to be used in the entries specified. Rows in this table are populated based on rowCreation in the etsysCosIrlPortGroupTable. Changes to this table are reflected in the etsysCosTxqPortGroupLastChange value. | |
| etsysCosIrlPortCfgEntry | 1.3.6.1.4.1.5624.1.2.55.1.5.8.1 | not-accessible | Conceptually defines a particular entry within the etsysCosIrlPortCfgTable. Details contained within this entry will depict the inbound rate limiter's reception rate and parent rate limiter. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. | |
| I32 etsysCosIrlPortCfgFloodLimiter | 1.3.6.1.4.1.5624.1.2.55.1.5.8.1.2 | Integer32 | read-write | This object will represent the etsysCosIrlResourceNum to be used to limit flooded traffic. |
| etsysCosIrlResourceTable | 1.3.6.1.4.1.5624.1.2.55.1.5.9 | not-accessible | A table containing the inbound rate limiting configurations to be used in the entries specified. | |
| etsysCosIrlResourceEntry | 1.3.6.1.4.1.5624.1.2.55.1.5.9.1 | not-accessible | Conceptually defines a particular entry within the etsysCosIrlResourceTable. These entries contain the specific attributes of policing rates (traffic clipping) and parent rate limiter. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. | |
| U32 etsysCosIrlResourceIrlNum | 1.3.6.1.4.1.5624.1.2.55.1.5.9.1.1 | Unsigned32 | not-accessible | The inbound rate limiter number associated with this entry. |
| ETS etsysCosIrlResourceUnits | 1.3.6.1.4.1.5624.1.2.55.1.5.9.1.2 | EtsysCosRateTypes | read-write | Identifies the unit size for the etsysCosIrlPortRate. Values MUST NOT exceed the capacity of the etsysCosIrlPortType they are associated with. |
| I32 etsysCosIrlResourceRate | 1.3.6.1.4.1.5624.1.2.55.1.5.9.1.3 | Integer32 | read-write | Identifies the number of units above which packets will considered in violation. This object is read-only for limiters of type count(5). The value (0) shall carry special meaning in this case of unset. Rate limiters identified as having a value of (0) shall not have this settings applied to the limiter. |
| I32 etsysCosIrlResourceParentIrl | 1.3.6.1.4.1.5624.1.2.55.1.5.9.1.4 | Integer32 | read-write | Setting this object to a positive value indicates the etsysCosIrlResourceIrlNum to be used in conjunction with this setting. A value of (-1) indicates the parent Irl is not configured. |
| ETS etsysCosIrlResourceType | 1.3.6.1.4.1.5624.1.2.55.1.5.9.1.5 | EtsysRateLimitingType | read-write | The characteristics applied to this rate limiter. When chaining limiters is used, the AND / OR attribute denotes the limiter logic in handling violation. For example, option rePrioritizeAnd(2) requires that the current limiter AND it's parent be violated for the packet to be reprioritized. The rePrioritizeOr(3) option only needs one OR the other to be violated for the action to be taken. |
| I32 etsysCosIrlResourceActionCosIndex | 1.3.6.1.4.1.5624.1.2.55.1.5.9.1.6 | Integer32 | read-write | This object will represent the CoS to be applied to packets in violation of the limits set when the etsysCosIrlResourceType is set to one of the rePrioritize types. |
| ETS etsysCosIrlResourceAction | 1.3.6.1.4.1.5624.1.2.55.1.5.9.1.7 | EtsysViolationAction | read-write | This object allows syslog, SNMP traps, or disabling actions to be taken limiters are first exceeded. |
| POR etsysCosIrlResourceViolationPortList | 1.3.6.1.4.1.5624.1.2.55.1.5.9.1.8 | PortList | read-write | The dot1dBridge ports this limiter has been violated on. Writing this object will clear the dot1dBridge ports given which have a corresponding bit of zero (0) in the PortList. |
| T/F etsysCosIrlResourceClearCounters | 1.3.6.1.4.1.5624.1.2.55.1.5.9.1.9 | TruthValue | read-write | This object shall always read false(2). When set to true(1) this object clears the counter associated with this entry, if the associated entry is a limiter of type count(5). |
| U32 etsysCosIrlReferenceMappingMaxReference | 1.3.6.1.4.1.5624.1.2.55.1.5.10 | Unsigned32 | read-only | The maximum number of etsysCosIrlReferences allowed in the etsysCosIrlMappingTable. |
| TIM etsysCosIrlReferenceMappingLastChange | 1.3.6.1.4.1.5624.1.2.55.1.5.11 | TimeStamp | read-only | The time at which the etsysCosIrlReferenceMappingTable was last modified. |
| etsysCosIrlReferenceMappingTable | 1.3.6.1.4.1.5624.1.2.55.1.5.12 | not-accessible | A table containing the user defined mappings of the inbound-rate-limiter-refences found in the etsysCosTable to actual inbound-rate-limiters associated with the specified port-group. | |
| etsysCosIrlReferenceMappingEntry | 1.3.6.1.4.1.5624.1.2.55.1.5.12.1 | not-accessible | Conceptually defines a particular entry within the etsysCosIrlReferenceMappingTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. | |
| I32 etsysCosIrlResourceIrlNumber | 1.3.6.1.4.1.5624.1.2.55.1.5.12.1.1 | Integer32 | read-write | The inbound rate limiter bond to this reference. |
| T/F etsysCosIrlViolationClearTable | 1.3.6.1.4.1.5624.1.2.55.1.5.13 | TruthValue | read-write | This object SHALL always read false. Setting this object to true removes all existing entries from the etsysCosIrlViolationTable. |
| TIM etsysCosIrlViolationLastChange | 1.3.6.1.4.1.5624.1.2.55.1.5.14 | TimeStamp | read-only | The time at which the etsysCosIrlViolationTable was last modified. |
| POR etsysCosIrlDisabledPortsList | 1.3.6.1.4.1.5624.1.2.55.1.5.15 | PortList | read-write | The list of dot1dBridge ports disabled as a result of limiting violation. A set to this list will clear the violation status of any port which has a corresponding clear bit in the list. |
| etsysCosIrlViolationTable | 1.3.6.1.4.1.5624.1.2.55.1.5.16 | not-accessible | A table containing the list of entries of all dot1dBridge ports that have detected violations of the limiters current settings. | |
| etsysCosIrlViolationEntry | 1.3.6.1.4.1.5624.1.2.55.1.5.16.1 | not-accessible | Conceptually defines a particular entry within the etsysCosIrlViolationTable. | |
| I32 etsysCosIrlPortIndex | 1.3.6.1.4.1.5624.1.2.55.1.5.16.1.1 | Integer32 | not-accessible | The dot1dBridge port on which this violation occurred. |
| T/F etsysCosIrlViolation | 1.3.6.1.4.1.5624.1.2.55.1.5.16.1.2 | TruthValue | read-only | This object represents the violation status for this limiter. If this object reads true(1) the action associated with this Irl have been taken. |
| C64 etsysCosIrlCounter | 1.3.6.1.4.1.5624.1.2.55.1.5.16.1.3 | Counter64 | read-only | In order for this object to have meaningful information the assigned limiter must be set up as a counter type limiter. This value shall then represent the number of configured units the limiter has recorded. If the associated limiter is of type pps(1) then the object represents the packets counted, otherwise it represents the octets counted. |
| ETS etsysCosIrlResetFlags | 1.3.6.1.4.1.5624.1.2.55.1.5.16.1.4 | EtsysRateLimitResetBits | read-write | This value shall always read as 0. This object clears the statistics gathering portion of this entry. If bit 0 is set, the etsysCosIrlViolation TruthValue will be reset to false. If bit 1 is set, the etsysCosIrlUnitCounter will be reset to zero. Both bits set shall clear both properties. |
| etsysCosOrl | 1.3.6.1.4.1.5624.1.2.55.1.6 | |||
| U32 etsysCosOrlPortTypeMaxEntries | 1.3.6.1.4.1.5624.1.2.55.1.6.1 | Unsigned32 | read-only | The actual number of distinctly unique (as defined by the set of shared outbound RateLimiting capabilities) port types available for configuration on this agent. |
| etsysCosOrlPortTypeTable | 1.3.6.1.4.1.5624.1.2.55.1.6.2 | not-accessible | A table defining the distinctly unique IRL characteristics of a group of ports. | |
| etsysCosOrlPortTypeEntry | 1.3.6.1.4.1.5624.1.2.55.1.6.2.1 | not-accessible | Conceptually defines a particular entry within the etsysCosOrlPortTypeTable. | |
| I32 etsysCosOrlPortTypeIndex | 1.3.6.1.4.1.5624.1.2.55.1.6.2.1.1 | Integer32 | not-accessible | The port type associated with the unique set of ports sharing these capabilities. |
| STR etsysCosOrlPortTypeDescr | 1.3.6.1.4.1.5624.1.2.55.1.6.2.1.2 | SnmpAdminString | read-only | The textual description that represents this set of dot1dBridge ports. |
| POR etsysCosOrlPortTypeEligiblePorts | 1.3.6.1.4.1.5624.1.2.55.1.6.2.1.3 | PortList | read-only | The list of dot1dBridge ports belonging (having the same capabilities) to this port type. |
| POR etsysCosOrlPortTypeUnselectedPorts | 1.3.6.1.4.1.5624.1.2.55.1.6.2.1.4 | PortList | read-only | The list of dot1dBridge ports not yet bound to a user created row (port group) in the etsysCosOrlPortGroupTable. |
| I32 etsysCosOrlPortTypeNumberOfORLs | 1.3.6.1.4.1.5624.1.2.55.1.6.2.1.5 | Integer32 | read-only | The maximum number of outbound rate limiters supported by this agent on this type of port. |
| ETS etsysCosOrlPortTypeSupportedRateTypes | 1.3.6.1.4.1.5624.1.2.55.1.6.2.1.6 | EtsysCosRateTypes | read-only | The rate types available on this type of port. |
| ETS etsysCosOrlPortTypeCapabilities | 1.3.6.1.4.1.5624.1.2.55.1.6.2.1.7 | EtsysCosRlCapabilities | read-only | The EtsysCosRlCapabilities available on this type of port. |
| etsysCosOrlUnitTable | 1.3.6.1.4.1.5624.1.2.55.1.6.3 | not-accessible | A table containing the rate type, minimum and maximum limits of the port groups and their respective granularity. | |
| etsysCosOrlUnitEntry | 1.3.6.1.4.1.5624.1.2.55.1.6.3.1 | not-accessible | Conceptually defines a particular entry within the etsysCosOrlUnitTable. Entries in this table indicate the port group boundaries for the type of port specified. | |
| ETS etsysCosOrlUnitTypeIndex | 1.3.6.1.4.1.5624.1.2.55.1.6.3.1.1 | EtsysCosRateTypes | not-accessible | The unit identifier for this port type. The metric at which the etsysCosOrlUnitMinRate, etsysCosOrlUnitMaxRate and etsysCosOrlUnitGranularity are applied. |
| U32 etsysCosOrlUnitMaxRate | 1.3.6.1.4.1.5624.1.2.55.1.6.3.1.2 | Unsigned32 | read-only | The maximum rate supported at the rate of units specified by etsysCosOrlUnitType. |
| U32 etsysCosOrlUnitMinRate | 1.3.6.1.4.1.5624.1.2.55.1.6.3.1.3 | Unsigned32 | read-only | The minimum rate supported at the rate of units specified by etsysCosOrlUnitType. |
| U32 etsysCosOrlUnitGranularity | 1.3.6.1.4.1.5624.1.2.55.1.6.3.1.4 | Unsigned32 | read-only | The smallest unit by which a rate can be modified. |
| U32 etsysCosOrlPortGroupMaxEntries | 1.3.6.1.4.1.5624.1.2.55.1.6.4 | Unsigned32 | read-only | The maximum number of port groups supported by this agent. |
| G32 etsysCosOrlPortGroupNumEntries | 1.3.6.1.4.1.5624.1.2.55.1.6.5 | Gauge32 | read-only | The number of assigned dot1dBridge port groups present in this agent. This number also reflects the port groups with a default system setup indicated by a zero(0) index. |
| TIM etsysCosOrlPortGroupLastChange | 1.3.6.1.4.1.5624.1.2.55.1.6.6 | TimeStamp | read-only | The time at which the etsysCosOrlPortTypeTable was last modified. |
| etsysCosOrlPortGroupTable | 1.3.6.1.4.1.5624.1.2.55.1.6.7 | not-accessible | A table containing the settings for specific types of dot1dBridge ports and their matching outbound rate limiting configurations. | |
| etsysCosOrlPortGroupEntry | 1.3.6.1.4.1.5624.1.2.55.1.6.7.1 | not-accessible | Conceptually defines a particular entry within the etsysCosOrlPortTypeTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. | |
| I32 etsysCosOrlPortGroupIndex | 1.3.6.1.4.1.5624.1.2.55.1.6.7.1.1 | Integer32 | not-accessible | The user-specified port group for which the settings are defined. This value MAY have meaning to the user for the purposes of identifying groups of dot1dBridge ports with similar function (uplink, user, etc). A value of zero(0) has special meaning in that it identifies the default port grouping of characteristics present in the agent. Entries indexed by a zero have a max-access of read-only. This value will have a system defined maximum of etsysCosOrlPortGroupMaxEntries. |
| ROW etsysCosOrlPortGroupRowStatus | 1.3.6.1.4.1.5624.1.2.55.1.6.7.1.2 | RowStatus | read-create | This object allows for the dynamic creation and deletion of entries within the etsysCosOrlPortGroupTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. When this object's value is active(1) the specified dot1dBridge ports listed in the PortGroupList shall be removed from UnselectedPorts. A row in transition to the active(1) state will have its port group list validated before activation. A port list that cannot be made active MUST result in the row state to become notReady(3) and no configuration action will be taken for this row. Rows not in the active(1) state SHALL NOT be persisted across entity resets and MUST return the ports from its port group list to the etsysCosOrlPortTypeUnselectedPorts. When this object's value is set to destroy(6) from an active(1) state, all dot1dBridge ports contained in etsysCosOrlPortGroupList shall be returned to the etsysCosOrlPortTypeUnselectedPorts and all entries referencing this row shall be removed as well. |
| POR etsysCosOrlPortGroupList | 1.3.6.1.4.1.5624.1.2.55.1.6.7.1.3 | PortList | read-write | The list of dot1dBridge ports to be assigned to this group. Ports in this list MUST : o Be mutually exclusive from other entries in this table o Be comprised of the same port type as defined by the etsysCosOrlPortTypeIndex. |
| STR etsysCosOrlPortGroupName | 1.3.6.1.4.1.5624.1.2.55.1.6.7.1.4 | SnmpAdminString | read-write | The administratively assigned textual description of this port group. |
| etsysCosOrlPortCfgTable | 1.3.6.1.4.1.5624.1.2.55.1.6.8 | not-accessible | A table containing the outbound rate limiting configurations to be used in the entries specified. Rows in this table are populated based on rowCreation in the etsysCosOrlPortGroupTable. Changes to this table are reflected in the etsysCosTxqPortGroupLastChange value. | |
| etsysCosOrlPortCfgEntry | 1.3.6.1.4.1.5624.1.2.55.1.6.8.1 | not-accessible | Conceptually defines a particular entry within the etsysCosOrlPortCfgTable. Details contained within this entry will depict the outbound rate limiter's reception rate and parent rate limiter. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. | |
| I32 etsysCosOrlPortCfgFloodLimiter | 1.3.6.1.4.1.5624.1.2.55.1.6.8.1.2 | Integer32 | read-write | This object will represent the etsysCosOrlResourceNum to be used to limit flooded traffic. |
| etsysCosOrlResourceTable | 1.3.6.1.4.1.5624.1.2.55.1.6.9 | not-accessible | A table containing the outbound rate limiting configurations to be used in the entries specified. | |
| etsysCosOrlResourceEntry | 1.3.6.1.4.1.5624.1.2.55.1.6.9.1 | not-accessible | Conceptually defines a particular entry within the etsysCosOrlResourceTable. These entries contain the specific attributes of policing rates (traffic clipping) and parent rate limiter. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. | |
| U32 etsysCosOrlResourceOrlNum | 1.3.6.1.4.1.5624.1.2.55.1.6.9.1.1 | Unsigned32 | not-accessible | The outbound rate limiter number associated with this entry. |
| ETS etsysCosOrlResourceUnits | 1.3.6.1.4.1.5624.1.2.55.1.6.9.1.2 | EtsysCosRateTypes | read-write | Identifies the unit size for the etsysCosOrlPortRate. Values MUST NOT exceed the capacity of the etsysCosOrlPortType they are associated with. |
| I32 etsysCosOrlResourceRate | 1.3.6.1.4.1.5624.1.2.55.1.6.9.1.3 | Integer32 | read-write | Identifies the number of units above which packets will considered in violation. This object is read-only for limiters of type count(5). The value (0) shall carry special meaning in this case of unset. Rate limiters identified as having a value of (0) shall not have this settings applied to the limiter. |
| I32 etsysCosOrlResourceParentOrl | 1.3.6.1.4.1.5624.1.2.55.1.6.9.1.4 | Integer32 | read-write | Setting this object to a positive value indicates the etsysCosOrlResourceOrlNum to be used in conjunction with this setting. A value of (-1) indicates the parent Orl is not configured. |
| ETS etsysCosOrlResourceType | 1.3.6.1.4.1.5624.1.2.55.1.6.9.1.5 | EtsysRateLimitingType | read-write | The characteristics applied to this rate limiter. When chaining limiters is used, the AND / OR attribute denotes the limiter logic in handling violation. For example, option rePrioritizeAnd(2) requires that the current limiter AND it's parent be violated for the packet to be reprioritized. The rePrioritizeOr(3) option only needs one OR the other to be violated for the action to be taken. |
| I32 etsysCosOrlResourceActionCosIndex | 1.3.6.1.4.1.5624.1.2.55.1.6.9.1.6 | Integer32 | read-write | This object will represent the CoS to be applied to packets in violation of the limits set when the etsysCosOrlResourceType is set to one of the rePrioritize types. |
| ETS etsysCosOrlResourceAction | 1.3.6.1.4.1.5624.1.2.55.1.6.9.1.7 | EtsysViolationAction | read-write | This object allows syslog, SNMP traps, or disabling actions to be taken limiters are first exceeded. |
| POR etsysCosOrlResourceViolationPortList | 1.3.6.1.4.1.5624.1.2.55.1.6.9.1.8 | PortList | read-write | The dot1dBridge ports this limiter has been violated on. Writing this object will clear the dot1dBridge ports given which have a corresponding bit of zero (0) in the PortList. |
| T/F etsysCosOrlResourceClearCounters | 1.3.6.1.4.1.5624.1.2.55.1.6.9.1.9 | TruthValue | read-write | This object shall always read false(2). When set to true(1) this object clears the counter associated with this entry, if the associated entry is a limiter of type count(5). |
| U32 etsysCosOrlReferenceMappingMaxReference | 1.3.6.1.4.1.5624.1.2.55.1.6.10 | Unsigned32 | read-only | The maximum number of etsysCosOrlReferences allowed in the etsysCosOrlMappingTable. |
| TIM etsysCosOrlReferenceMappingLastChange | 1.3.6.1.4.1.5624.1.2.55.1.6.11 | TimeStamp | read-only | The time at which the etsysCosOrlReferenceMappingTable was last modified. |
| etsysCosOrlReferenceMappingTable | 1.3.6.1.4.1.5624.1.2.55.1.6.12 | not-accessible | A table containing the user defined mappings of the outbound-rate-limiter-refences found in the etsysCosTable to actual outbound-rate-limiters associated with the specified port-group. | |
| etsysCosOrlReferenceMappingEntry | 1.3.6.1.4.1.5624.1.2.55.1.6.12.1 | not-accessible | Conceptually defines a particular entry within the etsysCosOrlReferenceMappingTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. | |
| I32 etsysCosOrlResourceOrlNumber | 1.3.6.1.4.1.5624.1.2.55.1.6.12.1.1 | Integer32 | read-write | The outbound rate limiter bond to this reference. |
| T/F etsysCosOrlViolationClearTable | 1.3.6.1.4.1.5624.1.2.55.1.6.13 | TruthValue | read-write | This object SHALL always read false. Setting this object to true removes all existing entries from the etsysCosOrlViolationTable. |
| TIM etsysCosOrlViolationLastChange | 1.3.6.1.4.1.5624.1.2.55.1.6.14 | TimeStamp | read-only | The time at which the etsysCosOrlViolationTable was last modified. |
| POR etsysCosOrlDisabledPortsList | 1.3.6.1.4.1.5624.1.2.55.1.6.15 | PortList | read-write | The list of dot1dBridge ports disabled as a result of limiting violation. A set to this list will clear the violation status of any port which has a corresponding clear bit in the list. |
| etsysCosOrlViolationTable | 1.3.6.1.4.1.5624.1.2.55.1.6.16 | not-accessible | A table containing the list of entries of all dot1dBridge ports that have detected violations of the limiters current settings. | |
| etsysCosOrlViolationEntry | 1.3.6.1.4.1.5624.1.2.55.1.6.16.1 | not-accessible | Conceptually defines a particular entry within the etsysCosOrlViolationTable. | |
| I32 etsysCosOrlPortIndex | 1.3.6.1.4.1.5624.1.2.55.1.6.16.1.1 | Integer32 | not-accessible | The dot1dBridge port on which this violation occurred. |
| T/F etsysCosOrlViolation | 1.3.6.1.4.1.5624.1.2.55.1.6.16.1.2 | TruthValue | read-only | This object represents the violation status for this limiter. If this object reads true(1) the action associated with this Orl have been taken. |
| C64 etsysCosOrlCounter | 1.3.6.1.4.1.5624.1.2.55.1.6.16.1.3 | Counter64 | read-only | In order for this object to have meaningful information the assigned limiter must be set up as a counter type limiter. This value shall then represent the number of configured units the limiter has recorded. If the associated limiter is of type pps(0) then the object represents the packets counted, otherwise it represents the octets counted. |
| ETS etsysCosOrlResetFlags | 1.3.6.1.4.1.5624.1.2.55.1.6.16.1.4 | EtsysRateLimitResetBits | read-write | This value shall always read as 0. This object clears the statistics gathering portion of this entry. If bit 0 is set, the etsysCosOrlViolation TruthValue will be reset to false. If bit 1 is set, the etsysCosOrlUnitCounter will be reset to zero. Both bits set shall clear both properties. |
| etsysCosFloodControl | 1.3.6.1.4.1.5624.1.2.55.1.7 | |||
| U32 etsysCosFloodCtrlPortTypeMaxEntries | 1.3.6.1.4.1.5624.1.2.55.1.7.1 | Unsigned32 | read-only | The actual number of distinctly unique (as defined by the set of shared flooded RateLimiting capabilities) port types available for configuration on this agent. |
| etsysCosFloodCtrlPortTypeTable | 1.3.6.1.4.1.5624.1.2.55.1.7.2 | not-accessible | A table defining the distinctly unique Broadcast Rate Limiting characteristics of a group of ports. | |
| etsysCosFloodCtrlPortTypeEntry | 1.3.6.1.4.1.5624.1.2.55.1.7.2.1 | not-accessible | Conceptually defines a particular entry within the etsysCosFloodCtrlPortTypeTable. | |
| I32 etsysCosFloodCtrlPortTypeIndex | 1.3.6.1.4.1.5624.1.2.55.1.7.2.1.1 | Integer32 | accessible-for-notify | The port type associated with the unique set of ports sharing these capabilities. |
| STR etsysCosFloodCtrlPortTypeDescr | 1.3.6.1.4.1.5624.1.2.55.1.7.2.1.2 | SnmpAdminString | read-only | The textual description that represents this set of dot1dBridge ports. |
| POR etsysCosFloodCtrlPortTypeEligiblePorts | 1.3.6.1.4.1.5624.1.2.55.1.7.2.1.3 | PortList | read-only | The list of dot1dBridge ports belonging (having the same capabilities) to this port type. |
| POR etsysCosFloodCtrlPortTypeUnselectedPorts | 1.3.6.1.4.1.5624.1.2.55.1.7.2.1.4 | PortList | read-only | The list of dot1dBridge ports not yet bound to a user created row (port group) in the etsysCosFloodCtrlPortGroupTable. |
| ETS etsysCosFloodCtrlPortTypeSupportedRateTypes | 1.3.6.1.4.1.5624.1.2.55.1.7.2.1.5 | EtsysCosRateTypes | read-only | The rate types available on this type of port. |
| ETS etsysCosFloodCtrlPortTypeCapabilities | 1.3.6.1.4.1.5624.1.2.55.1.7.2.1.7 | EtsysCosRlCapabilities | read-only | The EtsysCosRlCapabilities available on this type of port. |
| etsysCosFloodCtrlUnitTable | 1.3.6.1.4.1.5624.1.2.55.1.7.3 | not-accessible | A table containing the rate type, minimum and maximum limits of the port groups and their respective granularity. | |
| etsysCosFloodCtrlUnitEntry | 1.3.6.1.4.1.5624.1.2.55.1.7.3.1 | not-accessible | Conceptually defines a particular entry within the etsysCosFloodCtrlUnitTable. Entries in this table indicate the port group boundaries for the type of port specified. | |
| ETS etsysCosFloodCtrlUnitTypeIndex | 1.3.6.1.4.1.5624.1.2.55.1.7.3.1.1 | EtsysCosRateTypes | not-accessible | The unit identifier for this port type. The metric at which the etsysCosFloodCtrlUnitMinRate, etsysCosFloodCtrlUnitMaxRate and etsysCosFloodCtrlUnitGranularity are applied. |
| U32 etsysCosFloodCtrlUnitMaxRate | 1.3.6.1.4.1.5624.1.2.55.1.7.3.1.2 | Unsigned32 | read-only | The maximum rate supported at the rate of units specified by etsysCosFloodCtrlUnitTypeIndex. |
| U32 etsysCosFloodCtrlUnitMinRate | 1.3.6.1.4.1.5624.1.2.55.1.7.3.1.3 | Unsigned32 | read-only | The minimum rate supported at the rate of units specified by etsysCosFloodCtrlUnitTypeIndex. |
| U32 etsysCosFloodCtrlUnitGranularity | 1.3.6.1.4.1.5624.1.2.55.1.7.3.1.4 | Unsigned32 | read-only | The smallest unit by which a rate can be modified. |
| U32 etsysCosFloodCtrlPortGroupMaxEntries | 1.3.6.1.4.1.5624.1.2.55.1.7.4 | Unsigned32 | read-only | The maximum number of port groups supported by this agent. |
| G32 etsysCosFloodCtrlPortGroupNumEntries | 1.3.6.1.4.1.5624.1.2.55.1.7.5 | Gauge32 | read-only | The number of assigned dot1dBridge port groups present in this agent. This number also reflects the port groups with a default system setup indicated by a zero(0) index. |
| TIM etsysCosFloodCtrlPortGroupLastChange | 1.3.6.1.4.1.5624.1.2.55.1.7.6 | TimeStamp | read-only | The time at which the etsysCosFloodCtrlPortTypeTable was last modified. |
| etsysCosFloodCtrlPortGroupTable | 1.3.6.1.4.1.5624.1.2.55.1.7.7 | not-accessible | A table containing the settings for specific types of dot1dBridge ports and their matching flooded rate limiting configurations. | |
| etsysCosFloodCtrlPortGroupEntry | 1.3.6.1.4.1.5624.1.2.55.1.7.7.1 | not-accessible | Conceptually defines a particular entry within the etsysCosFloodCtrlPortTypeTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. | |
| I32 etsysCosFloodCtrlPortGroupIndex | 1.3.6.1.4.1.5624.1.2.55.1.7.7.1.1 | Integer32 | accessible-for-notify | The user-specified port group for which the settings are defined. This value MAY have meaning to the user for the purposes of identifying groups of dot1dBridge ports with similar function (uplink, user, etc). A value of zero(0) has special meaning in that it identifies the default port grouping of characteristics present in the agent. Entries indexed by a zero have a max-access of read-only. This value will have a system defined maximum of etsysCosFloodCtrlPortGroupMaxEntries. |
| ROW etsysCosFloodCtrlPortGroupRowStatus | 1.3.6.1.4.1.5624.1.2.55.1.7.7.1.2 | RowStatus | read-create | This object allows for the dynamic creation and deletion of entries within the etsysCosFloodCtrlPortGroupTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. When this object's value is active(1) the specified dot1dBridge ports listed in the PortGroupList shall be removed from UnselectedPorts. A row in transition to the active(1) state will have its port group list validated before activation. A port list that cannot be made active MUST result in the row state to become notReady(3) and no configuration action will be taken for this row. Rows not in the active(1) state SHALL NOT be persisted across entity resets and MUST return the ports from its port group list to the etsysCosFloodCtrlPortTypeUnselectedPorts. When this object's value is set to destroy(6) from an active(1) state, all dot1dBridge ports contained in etsysCosFloodCtrlPortGroupList shall be returned to the etsysCosFloodCtrlPortTypeUnselectedPorts and all entries referencing this row shall be removed as well. |
| POR etsysCosFloodCtrlPortGroupList | 1.3.6.1.4.1.5624.1.2.55.1.7.7.1.3 | PortList | read-write | The list of dot1dBridge ports to be assigned to this group. Ports in this list MUST : o Be mutually exclusive from other entries in this table o Be comprised of the same port type as defined by the etsysCosFloodCtrlPortTypeIndex. |
| STR etsysCosFloodCtrlPortGroupName | 1.3.6.1.4.1.5624.1.2.55.1.7.7.1.4 | SnmpAdminString | read-write | The administratively assigned textual description of this port group. |
| INT etsysCosFloodCtrlSyslogActionMsgFormat | 1.3.6.1.4.1.5624.1.2.55.1.7.8 | INTEGER | read-write | This object controls the format of syslog messages sent in response to a flood rate limit being violated. A value of notification(1) causes the syslog message to provide the index of the violated limiter and the port(s) that the violation occurred on. A value of notificationWithPktHdr(2) causes the syslog message to provide the first 64 bytes of the violating packet in addition to the information provided by notification(1). |
| etsysCosFloodCtrlResourceTable | 1.3.6.1.4.1.5624.1.2.55.1.7.9 | not-accessible | A table containing the inbound rate limiting configurations to be used in the entries specified. | |
| etsysCosFloodCtrlResourceEntry | 1.3.6.1.4.1.5624.1.2.55.1.7.9.1 | not-accessible | Conceptually defines a particular entry within the etsysCosFloodCtrlResourceTable. These entries contain the specific attributes of flood policing rates (traffic clipping). Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets. | |
| INT etsysCosFloodCtrlFloodType | 1.3.6.1.4.1.5624.1.2.55.1.7.9.1.1 | INTEGER | accessible-for-notify | The type of received traffic that rate limited based on this row entries configured limits. |
| ETS etsysCosFloodCtrlResourceUnits | 1.3.6.1.4.1.5624.1.2.55.1.7.9.1.2 | EtsysCosRateTypes | read-write | Identifies the unit size for the etsysCosFloodCtrlPortRate. Values MUST NOT exceed the capacity of the etsysCosFloodCtrlPortType they are associated with. |
| I32 etsysCosFloodCtrlResourceRate | 1.3.6.1.4.1.5624.1.2.55.1.7.9.1.3 | Integer32 | read-write | Identifies the number of units above which packets will considered in violation. The value (0) shall carry special meaning in this case of unset. Rate limiters identified as having a value of (0) shall not have this settings applied to the limiter. |
| BIT etsysCosFloodCtrlResourceAction | 1.3.6.1.4.1.5624.1.2.55.1.7.9.1.4 | Bits | read-write | This object allows packet dropping, syslog, SNMP traps, or disabling actions to be taken limiters are first exceeded. It is permissible for no actions to be specified, which effectively disables the limiter. |
| POR etsysCosFloodCtrlResourceViolationPortList | 1.3.6.1.4.1.5624.1.2.55.1.7.9.1.5 | PortList | read-write | The dot1dBridge ports this limiter has been violated on. Writing this object will clear the dot1dBridge ports given which have a corresponding bit of zero (0) in the PortList. |
| T/F etsysCosFloodCtrlResourceClearCounters | 1.3.6.1.4.1.5624.1.2.55.1.7.9.1.6 | TruthValue | read-write | This object shall always read false(2). When set to true(1) this object clears the counter associated with this entry. |
| T/F etsysCosFloodCtrlViolationClearTable | 1.3.6.1.4.1.5624.1.2.55.1.7.10 | TruthValue | read-write | This object SHALL always read false. Setting this object to true removes all existing entries from the etsysCosFloodCtrlViolationTable. |
| TIM etsysCosFloodCtrlViolationLastChange | 1.3.6.1.4.1.5624.1.2.55.1.7.11 | TimeStamp | read-only | The time at which the etsysCosFloodCtrlViolationTable was last modified. |
| POR etsysCosFloodCtrlDisabledPortsList | 1.3.6.1.4.1.5624.1.2.55.1.7.12 | PortList | read-write | The list of dot1dBridge ports disabled as a result of limiting violation. A set to this list will clear the violation status of any port which has a corresponding clear bit in the list. |
| etsysCosFloodCtrlViolationTable | 1.3.6.1.4.1.5624.1.2.55.1.7.13 | not-accessible | A table containing the list of entries of all dot1dBridge ports that have detected violations of the limiters current settings. | |
| etsysCosFloodCtrlViolationEntry | 1.3.6.1.4.1.5624.1.2.55.1.7.13.1 | not-accessible | Conceptually defines a particular entry within the etsysCosFloodCtrlViolationTable. | |
| T/F etsysCosFloodCtrlViolation | 1.3.6.1.4.1.5624.1.2.55.1.7.13.1.1 | TruthValue | read-only | This object represents the violation status for this limiter. If this object reads true(1) the action associated with this FloodCtrl have been taken. |
| C64 etsysCosFloodCtrlCounter | 1.3.6.1.4.1.5624.1.2.55.1.7.13.1.2 | Counter64 | read-only | The number of configured units the limiter has recorded. If the associated limiter is of type pps(1) then the object represents the packets counted, otherwise it represents the octets counted. |
| ETS etsysCosFloodCtrlResetFlags | 1.3.6.1.4.1.5624.1.2.55.1.7.13.1.3 | EtsysRateLimitResetBits | read-write | This value shall always read as BITS contstruct with no bit set. This object clears the statistics gathering portion of this entry. If bit 0 is set, the etsysCosFloodCtrlViolation TruthValue will be reset to false(2). If bit 1 is set, the etsysCosFloodCtrlUnitCounter will be reset to zero. Setting both bits simultaneously shall clear both properties. |
| etsysCosConformance | 1.3.6.1.4.1.5624.1.2.55.2 | |||
| etsysCosGroups | 1.3.6.1.4.1.5624.1.2.55.2.1 | |||
| etsysCosMasterResetGroup | 1.3.6.1.4.1.5624.1.2.55.2.1.1 | A collection of objects providing a mechanism of resetting all objects back to an unconfigured state. | ||
| etsysCosCapabilitiesGroup | 1.3.6.1.4.1.5624.1.2.55.2.1.2 | A collection of objects providing the capability extent for the agent supporting this MIB. | ||
| etsysCosGroup | 1.3.6.1.4.1.5624.1.2.55.2.1.3 | A collection of objects providing the support capacity and capability extent for the agent supporting this MIB. The object etsysCosDropPrecedence is part of a required group however its access may be restricted to read-only for agents without the ability to support this feature and still wish to implement this MIB. | ||
| etsysCosTxqGroup | 1.3.6.1.4.1.5624.1.2.55.2.1.4 | A collection of objects required for creating and modifying settings for transmit queue configurations. | ||
| etsysCosIrlGroup | 1.3.6.1.4.1.5624.1.2.55.2.1.5 | A collection of objects required for creating and modifying settings for inbound rate limiter configurations. | ||
| etsysCosOrlGroup | 1.3.6.1.4.1.5624.1.2.55.2.1.6 | A collection of objects required for creating and modifying settings for outbound rate limiter configurations. | ||
| etsysCosNotificationGroup | 1.3.6.1.4.1.5624.1.2.55.2.1.7 | A collection of objects required for reporting rate limiter violations. | ||
| etsysCosCompliances | 1.3.6.1.4.1.5624.1.2.55.2.2 | |||
| etsysCosCompliance | 1.3.6.1.4.1.5624.1.2.55.2.2.1 | The compliance statement for devices that support Enterasys class of service. |
RFC description
Manages quality of service and transmission attributes for Enterasys network edge devices.
Start monitoring Enterasys Networks switch (legacy, later Extreme Networks) (CoS/802.1p/DSCP mappings) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.