ENTERASYS-POWER-ETHERNET-EXT-MIB :: etsysPseSlotPowerMaximum

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › ENTERASYS-POWER-ETHERNET-EXT-MIB › etsysPseSlotPowerMaximum

etsysPseSlotPowerMaximum

Module: ENTERASYS-POWER-ETHERNET-EXT-MIB

OID (symbolic): ENTERASYS-POWER-ETHERNET-EXT-MIB::etsysPseSlotPowerMaximum

OID (numeric): 1.3.6.1.4.1.5624.1.2.50.1.2.1.1.1

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: The maximum power that can be consumed by the module in this slot, based on the module's characteristics. For slots without Pse modules this object MUST return zero.

What is etsysPseSlotPowerMaximum?

This object reports the maximum wattage that the PoE module occupying a given chassis slot can consume, based on that module's own characteristics, and returns zero for slots with no PoE module installed. An admin reads this per-slot value to understand how much of the chassis power budget each populated slot could draw at full capacity. For example, a 48-port PoE+ line card slot might report a maximum of 740 watts.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.50.1.2.1.1.1
snmpwalk -v2c -c public <target> ENTERASYS-POWER-ETHERNET-EXT-MIB::etsysPseSlotPowerMaximum

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.50.1.2.1.1.1.1
snmpget -v2c -c public <target> ENTERASYS-POWER-ETHERNET-EXT-MIB::etsysPseSlotPowerMaximum.1

Start monitoring Enterasys Networks switch (legacy, later Extreme Networks) chassis, PoE/PoE+ capable (power budget management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-POWER-ETHERNET-EXT-MIB::etsysPseSlotPowerMaximum OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks) chassis, PoE/PoE+ capable (power budget management) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5624enterasysENTERASYS-MIB-NAMES
1.3.6.1.4.1.5624.1etsysMibsENTERASYS-MIB-NAMES
1.3.6.1.4.1.5624.1.2etsysModulesENTERASYS-MIB-NAMES
Numeric OIDNameModule
1.3.6.1.4.1.5624.1.2.50etsysPowerEthernetMibExtMIBENTERASYS-POWER-ETHERNET-EXT-MIB
1.3.6.1.4.1.5624.1.2.50.1etsysPowerEthernetObjectsENTERASYS-POWER-ETHERNET-EXT-MIB
1.3.6.1.4.1.5624.1.2.50.1.2etsysPseSlotPowerAllocationENTERASYS-POWER-ETHERNET-EXT-MIB
1.3.6.1.4.1.5624.1.2.50.1.2.1etsysPseSlotPowerAllocationTableENTERASYS-POWER-ETHERNET-EXT-MIB
1.3.6.1.4.1.5624.1.2.50.1.2.1.1etsysPseSlotPowerAllocationEntryENTERASYS-POWER-ETHERNET-EXT-MIB
1.3.6.1.4.1.5624.1.2.50.1.2.1.1.1etsysPseSlotPowerMaximumENTERASYS-POWER-ETHERNET-EXT-MIB