All MIBs › ENTERASYS-POWER-ETHERNET-EXT-MIB › etsysPsePortCapabilitySelect
etsysPsePortCapabilitySelect
Module: ENTERASYS-POWER-ETHERNET-EXT-MIB
OID (symbolic): ENTERASYS-POWER-ETHERNET-EXT-MIB::etsysPsePortCapabilitySelect
OID (numeric): 1.3.6.1.4.1.5624.1.2.50.1.5.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object sets the port's power management capabilities based on the IEEE standard.
ieee8023af (1) : IEEE Std 802.3af ieee8023at (2) : IEEE Std 802.3at
Attempting to set this value to a capability that is not supported, as indicated by etsysPsePortCapability, will result in an inconsistentValue error.
What is etsysPsePortCapabilitySelect?
This object selects which IEEE PoE standard, ieee8023af(1) or ieee8023at(2), governs power management on a given port; attempting to select a standard not indicated in etsysPsePortCapability returns an inconsistentValue error. An admin sets this to enable higher-power ieee8023at operation on ports feeding devices like PoE+ cameras or access points, when the port hardware supports it. For example, an admin would set this to ieee8023at(2) on a port powering a pan-tilt-zoom camera that needs more than 15.4 watts.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.50.1.5.1.1.5 snmpwalk -v2c -c public <target> ENTERASYS-POWER-ETHERNET-EXT-MIB::etsysPsePortCapabilitySelect
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.50.1.5.1.1.5.1 snmpget -v2c -c public <target> ENTERASYS-POWER-ETHERNET-EXT-MIB::etsysPsePortCapabilitySelect.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.50.1.5.1.1.5.1 i <value>
Start monitoring Enterasys Networks switch (legacy, later Extreme Networks) chassis, PoE/PoE+ capable (power budget management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-POWER-ETHERNET-EXT-MIB::etsysPsePortCapabilitySelect OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks) chassis, PoE/PoE+ capable (power budget management) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.50 | etsysPowerEthernetMibExtMIB | ENTERASYS-POWER-ETHERNET-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.50.1 | etsysPowerEthernetObjects | ENTERASYS-POWER-ETHERNET-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.50.1.5 | etsysPsePortPowerManagement | ENTERASYS-POWER-ETHERNET-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.50.1.5.1 | etsysPsePortPowerManagementTable | ENTERASYS-POWER-ETHERNET-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.50.1.5.1.1 | etsysPsePortPowerManagementEntry | ENTERASYS-POWER-ETHERNET-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.50.1.5.1.1.5 | etsysPsePortCapabilitySelect | ENTERASYS-POWER-ETHERNET-EXT-MIB |