All MIBs › ENTERASYS-POWER-ETHERNET-EXT-MIB › etsysPsePortDetectionStatus
etsysPsePortDetectionStatus
Module: ENTERASYS-POWER-ETHERNET-EXT-MIB
OID (symbolic): ENTERASYS-POWER-ETHERNET-EXT-MIB::etsysPsePortDetectionStatus
OID (numeric): 1.3.6.1.4.1.5624.1.2.50.1.5.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Describes the operational status of the port PD detection. A value of disabled(1)- indicates that the PSE State diagram is in the state DISABLED. A value of deliveringPower(3) - indicates that the PSE State diagram is in the state POWER_ON for a duration greater than tlim max. A value of fault(4) - indicates that the PSE State diagram is in the state TEST_ERROR. A value of test(5) - indicates that the PSE State diagram is in the state TEST_MODE. A value of otherFault(6) - indicates that the PSE State diagram is in the state IDLE due to the variable error_conditions. A value of searching(2)- indicates the PSE State diagram is in a state other than those listed above. A value of requestingPower(7) - indicates the PSE State diagram is in the state IDLE after transitioning from the state POWER_DENIED due to insufficient PSE power being available to satisfy the PD's requirements.
What is etsysPsePortDetectionStatus?
This object reports the operational state of a PoE port's powered-device detection state machine, such as disabled(1), searching(2), deliveringPower(3), fault(4), test(5), otherFault(6), or requestingPower(7). An admin uses this to diagnose why a connected device isn't receiving power, distinguishing a hardware fault from a case where the chassis simply lacks enough power budget. For example, a port stuck in requestingPower(7) indicates the attached device wants power but the chassis denied it due to insufficient available PSE power.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.50.1.5.1.1.6 snmpwalk -v2c -c public <target> ENTERASYS-POWER-ETHERNET-EXT-MIB::etsysPsePortDetectionStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.50.1.5.1.1.6.1 snmpget -v2c -c public <target> ENTERASYS-POWER-ETHERNET-EXT-MIB::etsysPsePortDetectionStatus.1
Start monitoring Enterasys Networks switch (legacy, later Extreme Networks) chassis, PoE/PoE+ capable (power budget management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-POWER-ETHERNET-EXT-MIB::etsysPsePortDetectionStatus OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks) chassis, PoE/PoE+ capable (power budget management) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.50 | etsysPowerEthernetMibExtMIB | ENTERASYS-POWER-ETHERNET-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.50.1 | etsysPowerEthernetObjects | ENTERASYS-POWER-ETHERNET-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.50.1.5 | etsysPsePortPowerManagement | ENTERASYS-POWER-ETHERNET-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.50.1.5.1 | etsysPsePortPowerManagementTable | ENTERASYS-POWER-ETHERNET-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.50.1.5.1.1 | etsysPsePortPowerManagementEntry | ENTERASYS-POWER-ETHERNET-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.50.1.5.1.1.6 | etsysPsePortDetectionStatus | ENTERASYS-POWER-ETHERNET-EXT-MIB |