EICON-MIB-ROUTER

All MIBs › EICON-MIB-ROUTER

Category: Vendor: Eicon Technology

Description: Eicon Technology router MIB for managing routing functionality on Eicon WAN communications platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is EICON-MIB-ROUTER?

EICON-MIB-ROUTER is Eicon Technology's proprietary MIB for managing routing functionality on Eicon WAN communications platforms (routers/multiprotocol WAN adapters). It exposes identity and inventory data (product name, release version/date), operational state, and capacity information such as number of ports, maximum circuits, and currently available circuits. It directly supports hardware/software status monitoring: rtOperState and rtAdminStateCtr reveal whether the router is up and administratively enabled, rtTimeUp reflects device uptime, and rtReleaseVersion/rtReleaseDate confirm the installed software/firmware version, while rtAvailableCircuits versus rtMaxCircuits shows remaining WAN circuit capacity. It is a self-contained vendor MIB with no apparent dependency on other standard MIBs. It is deployed on Eicon WAN routers used for multiprotocol/ISDN and packet WAN connectivity in enterprise branch and remote-access networks. Engineers can download the EICON-MIB-ROUTER file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in EICON-MIB-ROUTER. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Eicon Technology WAN router

Monitoring Examples

An operator would poll rtOperState and rtTimeUp to confirm the router is up and see how long it has been running since last reboot, cross-checking rtReleaseVersion/rtReleaseDate to verify the expected firmware is installed. Comparing rtAvailableCircuits against rtMaxCircuits and rtNumberOfPorts shows whether the router is approaching its provisioned WAN circuit capacity, which combined with a falling rtAvailableLANMapping count would indicate a resource-exhaustion problem building before new circuits fail to establish.

What Can Be Monitored

router operational/admin state
device uptime
software release version/date
available vs maximum circuits
port count

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
Gauge
IpAddress
TimeTicks
enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
eicon	1.3.6.1.4.1.434
management	1.3.6.1.4.1.434.2
mibv2	1.3.6.1.4.1.434.2.2
router	1.3.6.1.4.1.434.2.2.8
STR rtName	1.3.6.1.4.1.434.2.2.8.1	DisplayString	read-only	The name advertised by the router agent using SAP.
STR rtProductName	1.3.6.1.4.1.434.2.2.8.2	DisplayString	read-only	The Product name ie. Router for Netware.
INT rtReleaseVersion	1.3.6.1.4.1.434.2.2.8.3	INTEGER	read-only	Ex.: Ver. 3 Rel. 2.
INT rtReleaseDate	1.3.6.1.4.1.434.2.2.8.4	INTEGER	read-only	Format: 1993/03/25.
OPE rtOperState	1.3.6.1.4.1.434.2.2.8.5	OperState	read-only	The operational state of the router.
ADM rtAdminStateCtr	1.3.6.1.4.1.434.2.2.8.6	AdminState	read-write	The administrative state of the router. Management station will change this value to start or stop the router.
INT rtType	1.3.6.1.4.1.434.2.2.8.7	INTEGER	read-only	Type of router.
TIK rtTimeUp	1.3.6.1.4.1.434.2.2.8.8	TimeTicks	read-only	The time elapsed since the router was started.
INT rtNumberOfPorts	1.3.6.1.4.1.434.2.2.8.9	INTEGER	read-only	The number of Eicon ports currently used by the router.
INT rtMaxCircuits	1.3.6.1.4.1.434.2.2.8.10	INTEGER	read-only	The maximum number of connections that can be configured for this router.
GAU rtAvailableCircuits	1.3.6.1.4.1.434.2.2.8.11	Gauge	read-only	The number of connections still available for this router.
GAU rtAvailableLANMapping	1.3.6.1.4.1.434.2.2.8.12	Gauge	read-only	The available number of LAN protocol mappings for all connections.
INT rtMaxLANMapping	1.3.6.1.4.1.434.2.2.8.13	INTEGER	read-only	The maximum number of LAN protocol mappings for all connections.
CTR rtGlobalTxPackets	1.3.6.1.4.1.434.2.2.8.14	Counter	read-only	The number of packets transmitted by the router on all ports
CTR rtGlobalTxBytesLow	1.3.6.1.4.1.434.2.2.8.15	Counter	read-only	The number of bytes transmitted by the router on all ports - the low 32 bits of the 64 bits counter.
CTR rtGlobalTxBytesHigh	1.3.6.1.4.1.434.2.2.8.16	Counter	read-only	The number of bytes transmitted by the router on all ports - the high 32 bits of the 64 bits counter.
CTR rtGlobalRxPackets	1.3.6.1.4.1.434.2.2.8.17	Counter	read-only	The number of packets received by the router on all ports
CTR rtGlobalRxBytesLow	1.3.6.1.4.1.434.2.2.8.18	Counter	read-only	The number of bytes received by the router on all ports - the low 32 bits of the 64 bits counter.
CTR rtGlobalRxBytesHigh	1.3.6.1.4.1.434.2.2.8.19	Counter	read-only	The number of bytes received by the router on all ports - the high 32 bits of the 64 bits counter.
CTR rtGlobalTxDropNoRoute	1.3.6.1.4.1.434.2.2.8.20	Counter	read-only	The number of transmit packets dropped on all ports because no route was found.
CTR rtGlobalTxDropNoResource	1.3.6.1.4.1.434.2.2.8.21	Counter	read-only	The number of transmit packets dropped on all ports because resources were exhausted.
CTR rtGlobalTxDropUnknownProt	1.3.6.1.4.1.434.2.2.8.22	Counter	read-only	The number of transmit packets dropped because the WAN protocol is not supported.
CTR rtGlobalRxDropNoResource	1.3.6.1.4.1.434.2.2.8.23	Counter	read-only	The number of received packets dropped on all ports because resources were exhausted.
CTR rtGlobalRxDropUnknownProt	1.3.6.1.4.1.434.2.2.8.24	Counter	read-only	The number of received packets dropped because a LAN protocol is not supported.
CTR rtGlobalRxError	1.3.6.1.4.1.434.2.2.8.25	Counter	read-only	The number of errors encountered when receiving from the EiconCard(s).
CON rtGlobalCountersReset	1.3.6.1.4.1.434.2.2.8.26	ControlOnOff	read-write	This variable is used to reset all router global counters.
CON rtTraceCtrl	1.3.6.1.4.1.434.2.2.8.27	ControlOnOff	read-write	This object is used to start or stop the trace with the parameters specified by the following trace objects.
STR rtTraceFileName	1.3.6.1.4.1.434.2.2.8.28	DisplayString	read-write	The (fully qualified) file name for the file which will hold the trace.
INT rtTraceInterfaceType	1.3.6.1.4.1.434.2.2.8.29	INTEGER	read-write	The mask which indicates to the Agent the interface type(s) to be traced. The trace value for the lower layer is (1) and for the upper layer is (2).
rtPortTable	1.3.6.1.4.1.434.2.2.8.30		not-accessible	The router port table.
rtPortEntry	1.3.6.1.4.1.434.2.2.8.30.1		not-accessible	The router information for one port.
INT rtPortIndex	1.3.6.1.4.1.434.2.2.8.30.1.1	INTEGER	read-only	Index of this table
INT rtPortNumber	1.3.6.1.4.1.434.2.2.8.30.1.2	INTEGER	read-only	EiconCard port number.
INT rtPortProtocol	1.3.6.1.4.1.434.2.2.8.30.1.3	INTEGER	read-only	Mask indicating the choice of WAN protocols: x25 (1), fr (2), ppp (4), sna (8), hdlc (16).
GAU rtPortTxThroughput	1.3.6.1.4.1.434.2.2.8.30.1.4	Gauge	read-only	Throughput calculated for the transmision.
GAU rtPortRxThroughput	1.3.6.1.4.1.434.2.2.8.30.1.5	Gauge	read-only	Throughput calculated for the reception.
CTR rtPortTxPackets	1.3.6.1.4.1.434.2.2.8.30.1.6	Counter	read-only	Number of packets transmitted for this port.
CTR rtPortTxBytesLow	1.3.6.1.4.1.434.2.2.8.30.1.7	Counter	read-only	Number of bytes transmitted for this port; the low 32 bits of the 64 bits counter.
CTR rtPortTxBytesHigh	1.3.6.1.4.1.434.2.2.8.30.1.8	Counter	read-only	Number of bytes transmitted for this port; the high 32 bits of the 64 bits counter.
CTR rtPortRxPackets	1.3.6.1.4.1.434.2.2.8.30.1.9	Counter	read-only	Number of packets received for this port.
CTR rtPortRxBytesLow	1.3.6.1.4.1.434.2.2.8.30.1.10	Counter	read-only	Number of bytes received for this port; the low 32 bits of the 64 bits counter.
CTR rtPortRxBytesHigh	1.3.6.1.4.1.434.2.2.8.30.1.11	Counter	read-only	Number of bytes received for this port; the high 32 bits of the 64 bits counter.
CTR rtPortTxDropNoResource	1.3.6.1.4.1.434.2.2.8.30.1.12	Counter	read-only	Number of transmit packets dropped because no resources were available.
CTR rtPortRxError	1.3.6.1.4.1.434.2.2.8.30.1.13	Counter	read-only	Number of packets received with an EiconCard error.
CON rtPortCountersReset	1.3.6.1.4.1.434.2.2.8.30.1.14	ControlOnOff	read-write	This object is used to reset the values of all counters for this port.
INT rtConnFreeIndex	1.3.6.1.4.1.434.2.2.8.31	INTEGER	read-only	The index value used by the Management station to create the row in the rtConnTable. This value will be used to identify new instance of rtConnEntryStatus object when the Management station attempts to write its value to createRequest (2). If the Agent accepts this value it will change it to underCreation (3). After that, the Management station has a limited time to create all remaining objects in the rtConnEntry and change rtConnEntryStatus to valid (1) or abandon and change rtConnEntryStatus to invalid (4). The entries with the invalid (4) state can be deleted from the table by the Agent.
rtConnTable	1.3.6.1.4.1.434.2.2.8.32		not-accessible	The table of WAN connections to peer routers.
rtConnEntry	1.3.6.1.4.1.434.2.2.8.32.1		not-accessible	The routing information for one destination.
INT rtConnIndex	1.3.6.1.4.1.434.2.2.8.32.1.1	INTEGER	read-only	The index used to identify the connection entry.
STR rtConnName	1.3.6.1.4.1.434.2.2.8.32.1.2	DisplayString	read-write	The name used to identify the connection entry.
STR rtConnComment	1.3.6.1.4.1.434.2.2.8.32.1.3	DisplayString	read-write	Optional comment about the connection entry.
ENT rtConnEntryStatus	1.3.6.1.4.1.434.2.2.8.32.1.4	EntryStatus	read-write	The object used to reserve the connection entry during the row creation. It also indicates if the entry is valid or not.
OPE rtConnOperState	1.3.6.1.4.1.434.2.2.8.32.1.5	OperState	read-only	The object describing the state of the connection.
ADM rtConnAdminStateCtr	1.3.6.1.4.1.434.2.2.8.32.1.6	AdminState	read-write	The object used to start and stop the circuit for this connection entry.
INT rtConnAutoStart	1.3.6.1.4.1.434.2.2.8.32.1.7	INTEGER	read-write	The object used to indicate if the connnection should be activated every time the router starts. Yes is the default.
INT rtConnType	1.3.6.1.4.1.434.2.2.8.32.1.8	INTEGER	read-write	The type of connection.
INT rtConnInactivityTimeout	1.3.6.1.4.1.434.2.2.8.32.1.9	INTEGER	read-write	The connection inactivity timeout in seconds.
POR rtConnPortNumber	1.3.6.1.4.1.434.2.2.8.32.1.10	PortRef	read-write	The EiconCard port number for this connection.
INT rtConnCompression	1.3.6.1.4.1.434.2.2.8.32.1.11	INTEGER	read-write	The object indicating the type of compression to use, if any.
INT rtConnRetryNum	1.3.6.1.4.1.434.2.2.8.32.1.12	INTEGER	read-write	The connection retry count; value (0) indicates no retry, value (100) indicates infinite retry, value (5) is the default.
INT rtConnRetryDelay	1.3.6.1.4.1.434.2.2.8.32.1.13	INTEGER	read-write	The connection retry delay in seconds.
INT rtConnPeerRouter	1.3.6.1.4.1.434.2.2.8.32.1.14	INTEGER	read-write	The type of the peer router for this connection.
INT rtConnLanProtocol	1.3.6.1.4.1.434.2.2.8.32.1.15	INTEGER	read-write	The mask used to indicate the type of LAN protocols used for this connection. IPX =1, IP=2, AT=4.
INT rtConnWanProtocol	1.3.6.1.4.1.434.2.2.8.32.1.16	INTEGER	read-write	The object indicates which WAN protocol will be used for this connection.
STR rtConnX25LocalDTE	1.3.6.1.4.1.434.2.2.8.32.1.17	DisplayString	read-write	The X25 Local DTE Address configured for this connection.
STR rtConnX25RemoteDTE	1.3.6.1.4.1.434.2.2.8.32.1.18	DisplayString	read-write	The X25 Remote DTE Address configured for this connection.
STR rtConnX25CallingFacilities	1.3.6.1.4.1.434.2.2.8.32.1.19	DisplayString	read-write	The X25 Calling Facilities configured for this connection.
STR rtConnX25ListeningFacilities	1.3.6.1.4.1.434.2.2.8.32.1.20	DisplayString	read-write	The X25 Listening Facilities configured for this connection.
STR rtConnX25UserData	1.3.6.1.4.1.434.2.2.8.32.1.21	DisplayString	read-write	The X25 User Data configured for this connection.
INT rtConnX25Pvc	1.3.6.1.4.1.434.2.2.8.32.1.22	INTEGER	read-write	The X25 PVC configured for this connection.
INT rtConnFrDlci	1.3.6.1.4.1.434.2.2.8.32.1.23	INTEGER	read-write	The Frame Relay DLCI configured for this connection.
STR rtConnSnaPuName	1.3.6.1.4.1.434.2.2.8.32.1.24	DisplayString	read-write	Physical Unit Name.
STR rtConnSnaLocalFqName	1.3.6.1.4.1.434.2.2.8.32.1.25	DisplayString	read-write	Local fully qualified name.
STR rtConnSnaRemoteFqName	1.3.6.1.4.1.434.2.2.8.32.1.26	DisplayString	read-write	Remote fully qualified name.
STR rtConnSnaModeName	1.3.6.1.4.1.434.2.2.8.32.1.27	DisplayString	read-write	Mode name.
INT rtConnSnaSendPaceWindow	1.3.6.1.4.1.434.2.2.8.32.1.28	INTEGER	read-write	Send Pace Window.
INT rtConnSnaReceivePaceWindow	1.3.6.1.4.1.434.2.2.8.32.1.29	INTEGER	read-write	Receive Pace Window.
INT rtConnSnaRuSendLow	1.3.6.1.4.1.434.2.2.8.32.1.30	INTEGER	read-write	Request Unit send low.
INT rtConnSnaRuReceiveLow	1.3.6.1.4.1.434.2.2.8.32.1.31	INTEGER	read-write	Request Unit receive low.
INT rtConnSnaRuSendHigh	1.3.6.1.4.1.434.2.2.8.32.1.32	INTEGER	read-write	Request Unit send high.
INT rtConnSnaRuReceiveHigh	1.3.6.1.4.1.434.2.2.8.32.1.33	INTEGER	read-write	Request unit receive high.
INT rtConnUsage	1.3.6.1.4.1.434.2.2.8.32.1.34	INTEGER	read-write	The connection can be defined as a primary or a backup connection for a primary.
INT rtConnFrSegmentation	1.3.6.1.4.1.434.2.2.8.32.1.35	INTEGER	read-write	The object used to indicate if the Frame Relay segmentation (RFC1490) can be used on this connection.
INT rtConnFrXid	1.3.6.1.4.1.434.2.2.8.32.1.36	INTEGER	read-write	The object used to indicate if the Frame-relay XID (RFC1490) can be used on this connection
STR rtConnPrimOrBackName	1.3.6.1.4.1.434.2.2.8.32.1.37	DisplayString	read-write	This parameter applies only if the rtConnFunction field=FuncPrimary. This is the name used to identify primary connection entry.
INT rtConnRipSapUpdateType	1.3.6.1.4.1.434.2.2.8.32.1.38	INTEGER	read-write	The update type of RIP / SAP.
INT rtConnSAPDelay	1.3.6.1.4.1.434.2.2.8.32.1.39	INTEGER	read-write	The delay in minutes between the SAP updates on this WAN connection.
INT rtConnRIPDelay	1.3.6.1.4.1.434.2.2.8.32.1.40	INTEGER	read-write	The delay in minutes between the RIP updates on this WAN connection.
INT rtIPMapFreeIndex	1.3.6.1.4.1.434.2.2.8.33	INTEGER	read-only	The index value used by the Management station to create the row in the rtIPMappingTable. This value will be used to identify new instance of rtIPMapEntryStatus object when the Management station attempts to write its value to createRequest (2). If the Agent accepts this value it will change it to underCreation (3). After that, the Management station has a limited time to create all remaining objects in the rtIPMappingEntry and change rtIPMapEntryStatus to valid (1) or abandon and change rtIPMapEntryStatus to invalid (4). The entries with the invalid (4) state can be deleted from the table by the Agent.
rtIPMappingTable	1.3.6.1.4.1.434.2.2.8.34		not-accessible	The IP mapping table.
rtIPMappingEntry	1.3.6.1.4.1.434.2.2.8.34.1		not-accessible	One mapping information entry.
INT rtIPMapIndex	1.3.6.1.4.1.434.2.2.8.34.1.1	INTEGER	read-only	The index used to identify the mapping entry. It is possible to have multiple LAN mapping entries for one connection.
INT rtIPMapConnIndex	1.3.6.1.4.1.434.2.2.8.34.1.2	INTEGER	read-write	Indicates the connection which uses this mapping. It is equal to one of the rtConnIndex values from the rtConnTable.
ENT rtIPMapEntryStatus	1.3.6.1.4.1.434.2.2.8.34.1.3	EntryStatus	read-write	The object used to reserve the mapping entry during the row creation. It also indicates if the entry is valid or not.
IP rtIPMapNextHop	1.3.6.1.4.1.434.2.2.8.34.1.4	IpAddress	read-write	The address of the next hop. It is indicated if the Management station knows the address and it can not be discovered by the router.
INT rtIPMapBroadcast	1.3.6.1.4.1.434.2.2.8.34.1.5	INTEGER	read-write	The object which indicates to the router if it may send broadcasts for this connection. 'Yes' is the default value.
IP rtIPMapIPMask	1.3.6.1.4.1.434.2.2.8.34.1.6	IpAddress	read-write	The IP address mask to be used for this mapping.
INT rtIPMapVJCompress	1.3.6.1.4.1.434.2.2.8.34.1.7	INTEGER	read-write	The object which indicates if the VanJacobsen compression is to be used for this mapping.
rtCircuitTable	1.3.6.1.4.1.434.2.2.8.35		not-accessible	The router circuit table.
rtCircuitEntry	1.3.6.1.4.1.434.2.2.8.35.1		not-accessible	The circuit information for one WAN connection. An entry in this table will be created by the Agent when the circuit is opened for a specified connection.
INT rtCircuitConnIndex	1.3.6.1.4.1.434.2.2.8.35.1.1	INTEGER	read-only	Indicates the connection which generated this circuit. It is equal to one of the rtConnIndex values from the rtConnTable.
INT rtCircuitStatus	1.3.6.1.4.1.434.2.2.8.35.1.2	INTEGER	read-only	Indicates the circuit status.
TIK rtCircuitTimeUp	1.3.6.1.4.1.434.2.2.8.35.1.3	TimeTicks	read-only	Time elapsed since this circuit was started.
INT rtCircuitErrCode	1.3.6.1.4.1.434.2.2.8.35.1.4	INTEGER	read-only	Last error code returned from the EiconCard.
INT rtCircuitSessionType	1.3.6.1.4.1.434.2.2.8.35.1.5	INTEGER	read-only	Type of circuit session.
INT rtCircuitConnLSN	1.3.6.1.4.1.434.2.2.8.35.1.6	INTEGER	read-only	Connection Manager LSN used for management.
INT rtCircuitDataLSN	1.3.6.1.4.1.434.2.2.8.35.1.7	INTEGER	read-only	Connection Manager LSN used for data.
INT rtCircuitCmSelector	1.3.6.1.4.1.434.2.2.8.35.1.8	INTEGER	read-only	Handle returned by Connection Manager for this circuit.
INT rtCircuitCompression	1.3.6.1.4.1.434.2.2.8.35.1.9	INTEGER	read-only	Compression on/off, after negotiation.
INT rtCircuitCompAlgorithm	1.3.6.1.4.1.434.2.2.8.35.1.10	INTEGER	read-only	Compression type, after negotiation.
GAU rtCircuitBeforeComp	1.3.6.1.4.1.434.2.2.8.35.1.11	Gauge	read-only	Number of bytes sent before compression.
GAU rtCircuitAfterComp	1.3.6.1.4.1.434.2.2.8.35.1.12	Gauge	read-only	Number of bytes sent after compression.
INT rtCircuitTxErr	1.3.6.1.4.1.434.2.2.8.35.1.13	INTEGER	read-only	The number of Transmit errors
INT rtCircuitBoundLANProtocol	1.3.6.1.4.1.434.2.2.8.35.1.14	INTEGER	read-only	The mask used to indicate the type of LAN protocols used for this connection. Possible values are: IPX=1, IP=2, AT=4.
STR rtCircuitRemoteRouter	1.3.6.1.4.1.434.2.2.8.35.1.15	DisplayString	read-only	The name of the remote router discovered by the local router.
CON rtCircuitCountersReset	1.3.6.1.4.1.434.2.2.8.35.1.16	ControlOnOff	read-write	The object is used to reset all counters for this circuit.
INT rtCircuitWanProtocol	1.3.6.1.4.1.434.2.2.8.35.1.17	INTEGER	read-only	The object indicates which WAN protocol will be used for this connection.
STR rtCircuitX25LocalDTE	1.3.6.1.4.1.434.2.2.8.35.1.18	DisplayString	read-only	The X25 Local DTE Address for this circuit
STR rtCircuitX25RemoteDTE	1.3.6.1.4.1.434.2.2.8.35.1.19	DisplayString	read-only	The X25 Remote DTE Address for this circuit
STR rtCircuitX25CallingFacilities	1.3.6.1.4.1.434.2.2.8.35.1.20	DisplayString	read-only	The X25 Calling Facilities for this circuit
STR rtCircuitX25ListeningFacilities	1.3.6.1.4.1.434.2.2.8.35.1.21	DisplayString	read-only	The X25 Listening Facilities for this circuit
STR rtCircuitX25UserData	1.3.6.1.4.1.434.2.2.8.35.1.22	DisplayString	read-only	The X25 User Data for this circuit
INT rtCircuitX25Cause	1.3.6.1.4.1.434.2.2.8.35.1.23	INTEGER	read-only	The Cause of Circuit connection failure
INT rtCircuitX25Diag	1.3.6.1.4.1.434.2.2.8.35.1.24	INTEGER	read-only	Diagnostics code of the Circuit connection failure.
INT rtCircuitX25Pvc	1.3.6.1.4.1.434.2.2.8.35.1.25	INTEGER	read-only	The X25 PVC for this circuit.
INT rtCircuitFrDlci	1.3.6.1.4.1.434.2.2.8.35.1.26	INTEGER	read-only	The Frame Relay DLCI for this circuit.
INT rtCircuitFrSegmentation	1.3.6.1.4.1.434.2.2.8.35.1.27	INTEGER	read-only	The object used to indicate if the Frame Relay segmentation (RFC1490) can be used on this circuit.
INT rtCircuitFrXIDNegot	1.3.6.1.4.1.434.2.2.8.35.1.28	INTEGER	read-only	The object used to indicate if the Frame Relay XID (RFC1490) can be used on this circuit.
INT rtCircuitFrXIDPacketSize	1.3.6.1.4.1.434.2.2.8.35.1.29	INTEGER	read-only	The size of the Frame Relay XID packet.
INT rtCircuitFrCongestion	1.3.6.1.4.1.434.2.2.8.35.1.30	INTEGER	read-only	The object indicates if Frame Relay can be congested on this circuit.
rtCircuitIPTable	1.3.6.1.4.1.434.2.2.8.36		not-accessible	The router IP info table.
rtCircuitIPEntry	1.3.6.1.4.1.434.2.2.8.36.1		not-accessible	The circuit information specific to IP.
INT rtCircuitIPConnIndex	1.3.6.1.4.1.434.2.2.8.36.1.1	INTEGER	read-only	Indicates the connection which generated this circuit. It is equal to one of the rtConnIndex values from the rtConnTable.
IP rtCircuitIPRemoteAddress	1.3.6.1.4.1.434.2.2.8.36.1.2	IpAddress	read-only	Remote router IP address.
IP rtCircuitIPLocalAddress	1.3.6.1.4.1.434.2.2.8.36.1.3	IpAddress	read-only	Local router IP address.
CTR rtCircuitIPTxPackets	1.3.6.1.4.1.434.2.2.8.36.1.4	Counter	read-only	Number of transmit packets which carry IP.
CTR rtCircuitIPTxBytes	1.3.6.1.4.1.434.2.2.8.36.1.5	Counter	read-only	Number of transmit bytes which carry IP.
CTR rtCircuitIPRxPackets	1.3.6.1.4.1.434.2.2.8.36.1.6	Counter	read-only	Number of received packets which carry IP.
CTR rtCircuitIPRxBytes	1.3.6.1.4.1.434.2.2.8.36.1.7	Counter	read-only	Number of received bytes which carry IP.
rtCircuitIPXTable	1.3.6.1.4.1.434.2.2.8.37		not-accessible	The router IPX info table.
rtCircuitIPXEntry	1.3.6.1.4.1.434.2.2.8.37.1		not-accessible	The circuit information.
INT rtCircuitIPXConnIndex	1.3.6.1.4.1.434.2.2.8.37.1.1	INTEGER	read-only	Indicates the connection which generated this circuit.It is equal to one of the rtConnIndex values from the rtConnTable.
OCT rtCircuitIPXRemoteNode	1.3.6.1.4.1.434.2.2.8.37.1.2	OCTET STRING	read-only	Remote router node address.
OCT rtCircuitIPXRemoteNetwork	1.3.6.1.4.1.434.2.2.8.37.1.3	OCTET STRING	read-only	Remote router network address.
OCT rtCircuitIPXLocalNode	1.3.6.1.4.1.434.2.2.8.37.1.4	OCTET STRING	read-only	Local router node address.
OCT rtCircuitIPXLocalNetwork	1.3.6.1.4.1.434.2.2.8.37.1.5	OCTET STRING	read-only	Local router network address.
CTR rtCircuitIPXTxPackets	1.3.6.1.4.1.434.2.2.8.37.1.6	Counter	read-only	Number of transmit packets which carry IPX.
CTR rtCircuitIPXTxBytes	1.3.6.1.4.1.434.2.2.8.37.1.7	Counter	read-only	Number of transmit bytes which carry IPX.
CTR rtCircuitIPXRxPackets	1.3.6.1.4.1.434.2.2.8.37.1.8	Counter	read-only	Number of received packets which carry IPX.
CTR rtCircuitIPXRxBytes	1.3.6.1.4.1.434.2.2.8.37.1.9	Counter	read-only	Number of received bytes which carry IPX.
rtCircuitATTable	1.3.6.1.4.1.434.2.2.8.38		not-accessible	The router AT info table.
rtCircuitATEntry	1.3.6.1.4.1.434.2.2.8.38.1		not-accessible	The AT circuit information.
INT rtCircuitATConnIndex	1.3.6.1.4.1.434.2.2.8.38.1.1	INTEGER	read-only	Indicates the connection which generated this circuit.It is equal to one of the rtConnIndex values from the rtConnTable.
OCT rtCircuitATRemoteNet	1.3.6.1.4.1.434.2.2.8.38.1.2	OCTET STRING	read-only	Remote router network address.
OCT rtCircuitATRemoteNode	1.3.6.1.4.1.434.2.2.8.38.1.3	OCTET STRING	read-only	Remote router node address.
OCT rtCircuitATLocalNet	1.3.6.1.4.1.434.2.2.8.38.1.4	OCTET STRING	read-only	Local router network address.
OCT rtCircuitATLocalNode	1.3.6.1.4.1.434.2.2.8.38.1.5	OCTET STRING	read-only	Local router node address.
CTR rtCircuitATTxPackets	1.3.6.1.4.1.434.2.2.8.38.1.6	Counter	read-only	Number of transmit packets which carry AT.
CTR rtCircuitATTxBytes	1.3.6.1.4.1.434.2.2.8.38.1.7	Counter	read-only	Number of transmit bytes which carry AT.
CTR rtCircuitATRxPackets	1.3.6.1.4.1.434.2.2.8.38.1.8	Counter	read-only	Number of received packets which carry AT.
CTR rtCircuitATRxBytes	1.3.6.1.4.1.434.2.2.8.38.1.9	Counter	read-only	Number of received bytes which carry AT.
INT rtMaxIPFilter	1.3.6.1.4.1.434.2.2.8.39	INTEGER	read-only	The maximum number of IP Filters that can be configured for this router.
GAU rtAvailableIPFilter	1.3.6.1.4.1.434.2.2.8.40	Gauge	read-only	The number of IP Filters still available for this router.
CTR rtIPFilterDropStatsIn	1.3.6.1.4.1.434.2.2.8.41	Counter	read-only	Total number of incoming packets dropped.
CTR rtIPFilterDropStatsOut	1.3.6.1.4.1.434.2.2.8.42	Counter	read-only	Total number of outgoing packets dropped.
CTR rtIPFilterForwardStatsIn	1.3.6.1.4.1.434.2.2.8.43	Counter	read-only	Total number of incoming packets forwarded.
CTR rtIPFilterForwardStatsOut	1.3.6.1.4.1.434.2.2.8.44	Counter	read-only	Total number of outgoing packets forwarded.
INT rtIPFilterFreeIndex	1.3.6.1.4.1.434.2.2.8.45	INTEGER	read-only	This number indicating to the Manager the next available rtIPFilterIndex for a new Entry in the rtIPFilterTable (0 for none). The Manager will first get this value from the Agent and then use it to attempt to create an entry with that index value for any connection.
rtIPFilterTable	1.3.6.1.4.1.434.2.2.8.46		not-accessible	The IP Filter table.
rtIPFilterEntry	1.3.6.1.4.1.434.2.2.8.46.1		not-accessible	Information on an IP Filter.
INT rtIPFilterConnIndex	1.3.6.1.4.1.434.2.2.8.46.1.1	INTEGER	read-only	Same as rtConnIndex.
INT rtIPFilterIndex	1.3.6.1.4.1.434.2.2.8.46.1.2	INTEGER	read-only	Index of IP Filter for the connection.
ENT rtIPFilterEntryStatus	1.3.6.1.4.1.434.2.2.8.46.1.3	EntryStatusV2	read-write	The object used to reserve the connection entry during the row creation. It also indicates if the entry is valid or not.
OPE rtIPFilterOperState	1.3.6.1.4.1.434.2.2.8.46.1.4	OperState	read-only	The object indicates the state of the IP Filter.
ADM rtIPFilterAdminStateCtr	1.3.6.1.4.1.434.2.2.8.46.1.5	AdminState	read-write	The object used to start and stop the IP Filter.
INT rtIPFilterPosition	1.3.6.1.4.1.434.2.2.8.46.1.6	INTEGER	read-write	This variable indicates the order that the router should apply each filter. This field can be set only when adding a new IP Filter for a connection. The manager should use a valid rtIPFilterIndex to set this variable. The new filter will be inserted after the corresponding filter. To insert the filter at the beginning for the connection, set the variable to 0.
INT rtIPFilterAction	1.3.6.1.4.1.434.2.2.8.46.1.7	INTEGER	read-write	Drop (1) or Forward (2) the information.
INT rtIPFilterDirection	1.3.6.1.4.1.434.2.2.8.46.1.8	INTEGER	read-write	Specifies if the filter is applied to outgoing, incoming or both ways packets.
INT rtIPFilterPortType	1.3.6.1.4.1.434.2.2.8.46.1.9	INTEGER	read-write	Protocol type.
INT rtIPFilterLowSrcPort	1.3.6.1.4.1.434.2.2.8.46.1.10	INTEGER	read-write	Low Source Port.
INT rtIPFilterHighSrcPort	1.3.6.1.4.1.434.2.2.8.46.1.11	INTEGER	read-write	High Source Port.
INT rtIPFilterLowDestPort	1.3.6.1.4.1.434.2.2.8.46.1.12	INTEGER	read-write	Low Destination Port.
INT rtIPFilterHighDestPort	1.3.6.1.4.1.434.2.2.8.46.1.13	INTEGER	read-write	High Destination Port.
IP rtIPFilterIPAddressSrc	1.3.6.1.4.1.434.2.2.8.46.1.14	IpAddress	read-write	Source IP Address.
IP rtIPFilterIPMaskSrc	1.3.6.1.4.1.434.2.2.8.46.1.15	IpAddress	read-write	Mask of the source IP Address.
IP rtIPFilterIPAddressDest	1.3.6.1.4.1.434.2.2.8.46.1.16	IpAddress	read-write	Destination IP Address.
IP rtIPFilterIPMaskDest	1.3.6.1.4.1.434.2.2.8.46.1.17	IpAddress	read-write	Mask of the destination IP Address.
CTR rtIPFilterStatsIn	1.3.6.1.4.1.434.2.2.8.46.1.18	Counter	read-only	The number of incoming packets that match the filter.
CTR rtIPFilterStatsOut	1.3.6.1.4.1.434.2.2.8.46.1.19	Counter	read-only	The number of outgoing packets that match the filter.
ACT rtActionState	1.3.6.1.4.1.434.2.2.8.47	ActionState	read-only	The state of the operation performed on the router by the Agent as a result of setting the values to the 'rtAdminStateCtrl'. The Management station will poll that variable after initiating an action on the router. The value done(1) indicates that the action terminated successfully. The value failed(2) indicates that the action terminated with an error. In this case the variable 'rtActionError' indicates the error code.
INT rtActionError	1.3.6.1.4.1.434.2.2.8.48	INTEGER	read-only	The error code after the unsuccessful operation.

RFC description

Router MIB for Eicon Technology Corporation routers, managing routing software, ports, connections, and circuit information.

Start monitoring Eicon Technology WAN router with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download EICON-MIB-ROUTER

What Is EICON-MIB-ROUTER?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description