EICON-MIB-SERVER

All MIBs › EICON-MIB-SERVER

Category: Vendor: Eicon Technology

Description: Eicon Technology server MIB for monitoring and managing Eicon communications server resources and active sessions.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is EICON-MIB-SERVER?

EICON-MIB-SERVER is an Eicon Technology (communications hardware vendor) MIB for monitoring and managing an Eicon communications server's underlying platform resources and active sessions. It exposes hardware and OS inventory objects covering the server's bus type, CPU type and speed, standard/extended/expanded memory sizes, and the operating system/network operating system name and version. This is directly a hardware and software status MIB: CPU type/speed and memory sizing indicate the platform's capacity, while OS/NOS name and version fields let an admin confirm software compatibility, and srvAdminStateCtr tracks the server's administrative state. It is a self-contained vendor MIB without strong dependency on other standard MIBs beyond basic SNMPv2 SMI conventions. It is deployed in legacy Eicon communications server installations providing WAN/ISDN connectivity services to LAN clients, and administrators can download the EICON-MIB-SERVER file to load it into their management console.

IPNetwork Monitor allows you to monitor SNMP objects defined in EICON-MIB-SERVER. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Eicon Technology communications servers

Monitoring Examples

An administrator would poll srvCpuType and srvCpuSpeed alongside srvStdMemory, srvExtendMemory, and srvExpandedMemory to confirm the server's hardware capacity matches expectations before deploying additional communication sessions. Checking srvOsName/srvOsVersion and srvNosName/srvNosVersion would verify the installed OS and network OS versions are within supported combinations for the Eicon server software. A change in srvAdminStateCtr could indicate the server was administratively disabled, explaining a loss of communications service.

What Can Be Monitored

CPU type and speed
standard/extended/expanded memory size
operating system name and version
network OS name and version
server administrative state

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
Gauge
TimeTicks
enterprises

From RFC1213-MIB

DisplayString
PhysAddress
sysName

OIDs

OID symbolic	OID numeric	Type	Access	Description
eicon	1.3.6.1.4.1.434
NTF srvTrapHeartbeat	1.3.6.1.4.1.434.0.11			The srvTrapHeartbeat trap indicates that the server is still active.
NTF srvTrapInternal	1.3.6.1.4.1.434.0.12			The generic Internal trap indicates that the Agent detected an internal error.
management	1.3.6.1.4.1.434.2
mibv2	1.3.6.1.4.1.434.2.2
server	1.3.6.1.4.1.434.2.2.1
ADM srvAdminStateCtr	1.3.6.1.4.1.434.2.2.1.1	AdminState	read-write	The administrative state of the server. This control parameter is modified (set) by Operator in order to change the state of the server.
INT srvOsName	1.3.6.1.4.1.434.2.2.1.2	INTEGER	read-only	The name of the Operating System.
STR srvOsVersion	1.3.6.1.4.1.434.2.2.1.3	DisplayString	read-only	The version of the Operating System; e.g. SCO UNIX 3.2
INT srvNosName	1.3.6.1.4.1.434.2.2.1.4	INTEGER	read-only	The name of the Network Operating System.
STR srvNosVersion	1.3.6.1.4.1.434.2.2.1.5	DisplayString	read-only	The version of the Network Operating System; e.g. NetWare v3.11
STR srvLanShellInfo	1.3.6.1.4.1.434.2.2.1.6	DisplayString	read-only	The name and version of the Network Operating System shell.
INT srvBusType	1.3.6.1.4.1.434.2.2.1.7	INTEGER	read-only	The type of the BUS.
STR srvCpuType	1.3.6.1.4.1.434.2.2.1.8	DisplayString	read-only	The version of the CPU, e.g. 386
NUM srvCpuSpeed	1.3.6.1.4.1.434.2.2.1.9	PositiveInteger	read-only	The CPU speed in MGHz.
NUM srvStdMemory	1.3.6.1.4.1.434.2.2.1.10	PositiveInteger	read-only	The standard memory (in Kilo Bytes)
NUM srvExtendMemory	1.3.6.1.4.1.434.2.2.1.11	PositiveInteger	read-only	The extended memory (in Kilo Bytes)
NUM srvExpandedMemory	1.3.6.1.4.1.434.2.2.1.12	PositiveInteger	read-only	The expanded memory (in Kilo Bytes)
STR srvVideoAdaptType	1.3.6.1.4.1.434.2.2.1.13	DisplayString	read-only	The type of video adapter
STR srvHardDisk	1.3.6.1.4.1.434.2.2.1.14	DisplayString	read-only	The name/type of hard disk
INT srvHardDiskSize	1.3.6.1.4.1.434.2.2.1.15	INTEGER	read-only	The size in MB of the hard disk
STR srvNotePad	1.3.6.1.4.1.434.2.2.1.16	DisplayString	read-write	The string used by the Administrator for supplementary information about the Server. It will be stored by the Agent and retrived from the Agent.
INT srvAgentMajorVersion	1.3.6.1.4.1.434.2.2.1.17	INTEGER	read-only	The major version of the agent. For exemple, version 3.01, the major version is 3.
INT srvAgentMinorVersion	1.3.6.1.4.1.434.2.2.1.18	INTEGER	read-only	The minor version of the agent. For exemple, version 3.01, the minor version is 1.
INT srvAgentMaxOfLostNMPHeartB	1.3.6.1.4.1.434.2.2.1.19	INTEGER	read-write	The threshold for the number of lost consecutive NMP heartbeat messages. If the number of lost messsages is greater than srvAgentMaxOfLostNMPHeartB, then Agent will generate a Trap.
INT srvAgentHeartBeatPeriod	1.3.6.1.4.1.434.2.2.1.20	INTEGER	read-write	The period (in seconds) of the Trap with the server heartbeat message that the Agent will send to the NMC.
INT srvAgentPollFrequency	1.3.6.1.4.1.434.2.2.1.21	INTEGER	read-write	The period (in seconds) for the poll request, issued by the agent to the server components, to detect state changes and send a trap.
INT srvAgentAlarmsFilterValue	1.3.6.1.4.1.434.2.2.1.22	INTEGER	read-write	The threshold for the severity value of the alarms. Agent uses the filter for every Alarm before it is sent to the Manager.
STR srvDomainName	1.3.6.1.4.1.434.2.2.1.23	DisplayString	read-write	The name of the administrative/security domain of the Server. Has to be known by ECLAN. ECLAN uses this value in the server advertising messages.
STR srvDomainConfigDir	1.3.6.1.4.1.434.2.2.1.24	DisplayString	read-write	The path-name in the ESS server of the current default directory for all server configuration files. This variable could be set to a new value through the SNMP NM Console before sending the request to the Agent to start the EiconCard, ECLAN or the SSM. The Agent will use it to find necessary configuration information.
CAR srvNbOfLanCards	1.3.6.1.4.1.434.2.2.1.25	CardRef	read-only	The number of installed LAN cards
srvLanCardTable	1.3.6.1.4.1.434.2.2.1.26		not-accessible	The table of local LAN cards.
srvLanCardEntry	1.3.6.1.4.1.434.2.2.1.26.1		not-accessible	The information about one LAN card.
CAR srvLanCardIndex	1.3.6.1.4.1.434.2.2.1.26.1.1	CardRef	read-only	LAN card reference number.
INT srvLanCardCFGMajorVer	1.3.6.1.4.1.434.2.2.1.26.1.2	INTEGER	read-only	LAN CFG Major Version. This Field is defined by Novell and contains the major version number of the configuration table. In the version number 1.0, 1 is the major version number.
INT srvLanCardCFGMinorVer	1.3.6.1.4.1.434.2.2.1.26.1.3	INTEGER	read-only	LAN CFG Minor Version. This Field is defined by Novell and contains the minor version number of the configuration table. In the version number 1.0, 0 is the minor version number.
STR srvLanCardNodeAddr	1.3.6.1.4.1.434.2.2.1.26.1.4	DisplayString	read-only	Lan Card Node Address. This Field contains the node address of LAN Board.
INT srvLanCardMaxSize	1.3.6.1.4.1.434.2.2.1.26.1.5	INTEGER	read-only	This field contains the maximum send or receive packet size (in bytes) that the LAN board can transmit or receive.
STR srvLanCardName	1.3.6.1.4.1.434.2.2.1.26.1.6	DisplayString	read-only	Lan Card Name. This field contains a pointer to a byte-length proceded, zero-terminated ASCII description string that is contained in the OSDATA segment and is similar to the description string in the definition table. For example: NE2000 ETHERNET Driver.
STR srvLanCardShortName	1.3.6.1.4.1.434.2.2.1.26.1.7	DisplayString	read-only	This field contains a pointer to a string that describes the LAN board in eight bytes or less such as NE2000.
STR srvLanCardFrameType	1.3.6.1.4.1.434.2.2.1.26.1.8	DisplayString	read-only	This field contains a pointer to a string that describes the MLID's frame type. Examples include ETHERNET_802.3 and ETHERNET_II. The Independent Manufactuer Support Program (IMSP) assigns strings for the Frame Type. This String is case sensitive, and is a byte length-preceded, zero-terminated ASCII string.
INT srvLanCardDrvMajorVer	1.3.6.1.4.1.434.2.2.1.26.1.9	INTEGER	read-only	This field contain the major version number of the MLID.
INT srvLanCardDrvMinorVer	1.3.6.1.4.1.434.2.2.1.26.1.10	INTEGER	read-only	This field contain the minor version number of the MLID.
INT srvLanCardMemoryAddr	1.3.6.1.4.1.434.2.2.1.26.1.11	INTEGER	read-only	This field contains the absolute primary memory address the LAN board used. If not used, this field is set to 0.
INT srvLanCardInterrupt	1.3.6.1.4.1.434.2.2.1.26.1.12	INTEGER	read-only	This field contains the primary interrupt vector number. FFh = not used.
INT srvLanCardDMAUsage	1.3.6.1.4.1.434.2.2.1.26.1.13	INTEGER	read-only	This field contains the primary DMA channel used by the LAN board. FFh = not used.
NUM srvNbOfSoftPackage	1.3.6.1.4.1.434.2.2.1.27	PositiveInteger	read-only	The number of entries in the srvSoftPackageTable.
srvSoftPackageTable	1.3.6.1.4.1.434.2.2.1.28		not-accessible	The information about the Eicon software installed in the server.
srvPackageEntry	1.3.6.1.4.1.434.2.2.1.28.1		not-accessible	The information about Eicon's products in the server.
NUM srvProductIndex	1.3.6.1.4.1.434.2.2.1.28.1.1	PositiveInteger	read-only	The product reference number
STR srvProductName	1.3.6.1.4.1.434.2.2.1.28.1.2	DisplayString	read-only	The name of the product.
STR srvProductVersion	1.3.6.1.4.1.434.2.2.1.28.1.3	DisplayString	read-only	The version of the (Eicon) product.
STR srvProductDate	1.3.6.1.4.1.434.2.2.1.28.1.4	DisplayString	read-only	The installation date and time of the product.
INT srvProductConfigured	1.3.6.1.4.1.434.2.2.1.28.1.5	INTEGER	read-only	If the value is yes, the product is configured. If the value is no, the product is installed, but not configured.
CAR srvCfgNbOfEiconCards	1.3.6.1.4.1.434.2.2.1.29	CardRef	read-only	The number of configured EiconCards (from the current configuration)
srvCfgEiconCardTable	1.3.6.1.4.1.434.2.2.1.30		not-accessible	The table of configuration information of EiconCards (from the current configuration.
srvCfgEiconCardEntry	1.3.6.1.4.1.434.2.2.1.30.1		not-accessible	The configuration information about one EiconCard.
CAR srvCfgECIndex	1.3.6.1.4.1.434.2.2.1.30.1.1	CardRef	read-only	The Id of the EiconCard.
INT srvCfgECMemAddr	1.3.6.1.4.1.434.2.2.1.30.1.2	INTEGER	read-only	The EiconCard memory segment address.
INT srvCfgECIoAddr	1.3.6.1.4.1.434.2.2.1.30.1.3	INTEGER	read-only	The EiconCard IO address.
INT srvCfgECIntrLevel	1.3.6.1.4.1.434.2.2.1.30.1.4	INTEGER	read-only	The EiconCard interrupt level.
POR srvCfgECNbOfPorts	1.3.6.1.4.1.434.2.2.1.30.1.5	PortRef	read-only	The number of ports.
INT srvCfgECSlotNumber	1.3.6.1.4.1.434.2.2.1.30.1.6	INTEGER	read-only	The slot number for MicroChannel.
INT srvCfgECOptModule	1.3.6.1.4.1.434.2.2.1.30.1.7	INTEGER	read-only	The optional module for the MPNA card.
INT srvCfgECAutoActivate	1.3.6.1.4.1.434.2.2.1.30.1.8	INTEGER	read-only	The auto activation of the X.25 ports when the card starts.
POR srvCfgNbOfPorts	1.3.6.1.4.1.434.2.2.1.31	PortRef	read-only	The number of configured ports for all EiconCards (from the current configuration)
srvCfgPortTable	1.3.6.1.4.1.434.2.2.1.32		not-accessible	The table of configuration information of ports, from the current configuration.
srvCfgPortEntry	1.3.6.1.4.1.434.2.2.1.32.1		not-accessible	The configuration information about one port.
POR srvCfgPortIndex	1.3.6.1.4.1.434.2.2.1.32.1.1	PortRef	read-only	The index of the port generated by the Agent.
POR srvCfgPortLanaNo	1.3.6.1.4.1.434.2.2.1.32.1.2	PortRef	read-only	The LANA number of the port from the configuration, range: 1..48.
POR srvCfgPortName	1.3.6.1.4.1.434.2.2.1.32.1.3	PortName	read-only	The unique port name.
STR srvDescr	1.3.6.1.4.1.434.2.2.1.33	DisplayString	read-only	A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software. It is mandatory that this only contain printable ASCII characters.
OID srvObjectID	1.3.6.1.4.1.434.2.2.1.34	OBJECT IDENTIFIER	read-only	The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining `what kind of box' is being managed. For example, if vendor `Flintstones, Inc.' was assigned the subtree 1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.
TIK srvUpTime	1.3.6.1.4.1.434.2.2.1.35	TimeTicks	read-only	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.
STR srvContact	1.3.6.1.4.1.434.2.2.1.36	DisplayString	read-write	The textual identification of the contact person for this managed node, together with information on how to contact this person.
STR srvName	1.3.6.1.4.1.434.2.2.1.37	DisplayString	read-write	An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name.
STR srvLocation	1.3.6.1.4.1.434.2.2.1.38	DisplayString	read-write	The physical location of this node (e.g., `telephone closet, 3rd floor').
INT srvServices	1.3.6.1.4.1.434.2.2.1.39	INTEGER	read-only	A value which indicates the set of services that this entity offers primarily. The value is a sum. This sum initially takes the value zero, Then, for each layer, L, in the range 1 through 7, that this node performs transactions for, 2 raised to (L - 1) is added to the sum. For example, a node which performs primarily routing functions would have a value of 4 (2^(3-1)). In contrast, a node which is a host offering application services would have a value of 72 (2^(4-1) + 2^(7-1)). Note that in the context of the Internet suite of protocols, values should be calculated accordingly: layer functionality 1 physical (e.g., repeaters) 2 datalink/subnetwork (e.g., bridges) 3 internet (e.g., IP gateways) 4 end-to-end (e.g., IP hosts) 7 applications (e.g., mail relays) For systems including OSI protocols, layers 5 and 6 may also be counted.
INT srvIfNumber	1.3.6.1.4.1.434.2.2.1.40	INTEGER	read-only	The number of network interfaces (regardless of their current state) present on this system.
srvIfTable	1.3.6.1.4.1.434.2.2.1.41		not-accessible	A list of interface entries. The number of entries is given by the value of ifNumber.
srvIfEntry	1.3.6.1.4.1.434.2.2.1.41.1		not-accessible	An interface entry containing objects at the subnetwork layer and below for a particular interface.
INT srvIfIndex	1.3.6.1.4.1.434.2.2.1.41.1.1	INTEGER	read-only	A unique value for each interface. Its value ranges between 1 and the value of srvIfNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
STR srvIfDescr	1.3.6.1.4.1.434.2.2.1.41.1.2	DisplayString	read-only	A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the hardware interface.
INT srvIfType	1.3.6.1.4.1.434.2.2.1.41.1.3	INTEGER	read-only	The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack.
INT srvIfMtu	1.3.6.1.4.1.434.2.2.1.41.1.4	INTEGER	read-only	The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface.
GAU srvIfSpeed	1.3.6.1.4.1.434.2.2.1.41.1.5	Gauge	read-only	An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth.
PHY srvIfPhysAddress	1.3.6.1.4.1.434.2.2.1.41.1.6	PhysAddress	read-only	The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
INT srvIfAdminStatus	1.3.6.1.4.1.434.2.2.1.41.1.7	INTEGER	read-write	The desired state of the interface. The testing(3) state indicates that no operational packets can be passed.
INT srvIfOperStatus	1.3.6.1.4.1.434.2.2.1.41.1.8	INTEGER	read-only	The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed.
TIK srvIfLastChange	1.3.6.1.4.1.434.2.2.1.41.1.9	TimeTicks	read-only	The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this object contains a zero value.
CTR srvIfInOctets	1.3.6.1.4.1.434.2.2.1.41.1.10	Counter	read-only	The total number of octets received on the interface, including framing characters.
CTR srvIfInUcastPkts	1.3.6.1.4.1.434.2.2.1.41.1.11	Counter	read-only	The number of subnetwork-unicast packets delivered to a higher-layer protocol.
CTR srvIfInNUcastPkts	1.3.6.1.4.1.434.2.2.1.41.1.12	Counter	read-only	The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.
CTR srvIfInDiscards	1.3.6.1.4.1.434.2.2.1.41.1.13	Counter	read-only	The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
CTR srvIfInErrors	1.3.6.1.4.1.434.2.2.1.41.1.14	Counter	read-only	The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
CTR srvIfInUnknownProtos	1.3.6.1.4.1.434.2.2.1.41.1.15	Counter	read-only	The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.
CTR srvIfOutOctets	1.3.6.1.4.1.434.2.2.1.41.1.16	Counter	read-only	The total number of octets transmitted out of the interface, including framing characters.
CTR srvIfOutUcastPkts	1.3.6.1.4.1.434.2.2.1.41.1.17	Counter	read-only	The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.
CTR srvIfOutNUcastPkts	1.3.6.1.4.1.434.2.2.1.41.1.18	Counter	read-only	The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent.
CTR srvIfOutDiscards	1.3.6.1.4.1.434.2.2.1.41.1.19	Counter	read-only	The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent them from being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
CTR srvIfOutErrors	1.3.6.1.4.1.434.2.2.1.41.1.20	Counter	read-only	The number of outbound packets that could not be transmitted because of errors.
GAU srvIfOutQLen	1.3.6.1.4.1.434.2.2.1.41.1.21	Gauge	read-only	The length of the output packet queue (in packets).
INT srvIfSpecific	1.3.6.1.4.1.434.2.2.1.41.1.22	INTEGER	read-only	A reference to MIB definitions specific to the particular media being used to realize the interface. For example, if the interface is realized by an ethernet, then the value of this object refers to a document defining objects specific to ethernet. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.
OCT srvModulesOperStates	1.3.6.1.4.1.434.2.2.1.42	OCTET STRING	read-only	This is an array of Operation States for the Eicon modules running on the gateway. Each entry will have the syntax OperState. Array Index 0 Server state (Always active) 1 EcAppc state 2 SSM state 3 Router state 4 EcPad state 5 EcSwitch state 6 SLC state 7 HPRINT state 8 ECLan State A value of 0 in these positions means the specific module is not loaded.
STR srvInstallDirName	1.3.6.1.4.1.434.2.2.1.43	DisplayString	read-only	This is the directory where Eicon's products are installed.
STR srvCurrDirName	1.3.6.1.4.1.434.2.2.1.44	DisplayString	read-write	The entries in srvDirTable are the contents of this directory.
srvDirTable	1.3.6.1.4.1.434.2.2.1.45		not-accessible	A list of entries for the directory specified in srvCurrDirname.
srvDirEntry	1.3.6.1.4.1.434.2.2.1.45.1		not-accessible	An directory entry containing the names of files.
INT srvDirIndex	1.3.6.1.4.1.434.2.2.1.45.1.1	INTEGER	read-only	The index assigned by the Agent.
STR srvDirFilename	1.3.6.1.4.1.434.2.2.1.45.1.2	DisplayString	read-only	The file name.
INT srvDirFileAttribute	1.3.6.1.4.1.434.2.2.1.45.1.3	INTEGER	read-only	The attributes of the file. 0x0 - Normal 0x1 - ReadOnly 0x2 - Hidden 0x4 - System 0x10 - Subdirectory 0x20 - Archive 0x80 - Share.
INT srvDirFileAccessTime	1.3.6.1.4.1.434.2.2.1.45.1.4	INTEGER	read-only	The time the file is accessed expressed in seconds since Jan 01 1970.
INT srvDirFileSize	1.3.6.1.4.1.434.2.2.1.45.1.5	INTEGER	read-only	The file size in bytes.

RFC description

Eicon communication server hardware and operational status including card types, state, and management operations.

Start monitoring Eicon Technology WAN communications equipment server (platform resources/sessions) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download EICON-MIB-SERVER

What Is EICON-MIB-SERVER?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description