| OID symbolic | OID numeric | Type | Access | Description |
|---|
| eicon | 1.3.6.1.4.1.434 | | | |
| NTF cardTrapHeartbeatLost | 1.3.6.1.4.1.434.0.21 | | | The 'cardTrapHeartbeatLost' trap indicates that a EiconCard stopped sending statics to the Agent. |
| NTF cardTrapStateChange | 1.3.6.1.4.1.434.0.22 | | | The generic Internal trap indicates that the EiconCard has changed state. |
| management | 1.3.6.1.4.1.434.2 | | | |
| mibv2 | 1.3.6.1.4.1.434.2.2 | | | |
| card | 1.3.6.1.4.1.434.2.2.2 | | | |
| NUM cardNumberOfCards | 1.3.6.1.4.1.434.2.2.2.1 | PositiveInteger | read-only | The number of EiconCards seen by the Agent. |
| cardTable | 1.3.6.1.4.1.434.2.2.2.2 | | not-accessible | The table of EiconCards as seen by the agent. |
| cardEntry | 1.3.6.1.4.1.434.2.2.2.2.1 | | not-accessible | The set of attributes for one EiconCard. |
| CAR cardIndex | 1.3.6.1.4.1.434.2.2.2.2.1.1 | CardRef | read-only | The ID of the EiconCard provided by the local administrator |
| STR cardName | 1.3.6.1.4.1.434.2.2.2.2.1.2 | DisplayString | read-only | The name of the EiconCard given by the local administration. |
| EIC cardType | 1.3.6.1.4.1.434.2.2.2.2.1.3 | EiconCardType | read-only | The type of the EiconCard. The value '0' indicates that the row is invalid. |
| OPE cardOperState | 1.3.6.1.4.1.434.2.2.2.2.1.4 | OperState | read-only | The EiconCard operational state. |
| CAR cardAdminStateCtr | 1.3.6.1.4.1.434.2.2.2.2.1.5 | CardAdminState | read-write | The administrative state of the EiconCard. Management station can
modify the value of that parameter in order to perform a
specific action on the EiconCard. Value 'start' is used to
start the EiconCard, value 'stop' is used to stop the EiconCard. Value
'dump' is used to dump the EiconCard and value 'test' is used to
test the EiconCard hardware. Before the EiconCard is started, the Agent
will read the name of the configuration file directory to be
used from the srvDomainConfigDir. Agent will respond to that
request immediately and start the action. The Management
station will poll the cardActionState variable to find out the
results of the action and the cardActionError variable to find
the error code in the case of the action failure. If the action
produces an output file, then the mib variable
cardActionOutputFile has to be initialized by the Management
station. |
| STR cardDomainConfigDirName | 1.3.6.1.4.1.434.2.2.2.2.1.6 | DisplayString | read-only | The name of the directory in the ESS from which the current
configuration file of the card has been taken. The Agent will
intialize this value (equal to srvDomainConfigDir) after the
card has been successfully started. |
| TIK cardLoadTime | 1.3.6.1.4.1.434.2.2.2.2.1.7 | TimeTicks | read-only | The time elapsed in seconds since the card was loaded. |
| ACT cardActionState | 1.3.6.1.4.1.434.2.2.2.2.1.8 | ActionState | read-only | The state of the operation performed on the card by the Agent
as a result of setting the values to the cardAdminStateCtr.
The Management station will poll that variable after initiating
an action on the card. The value done(1) indicates that the
action terminated successfully. The value failed(2) indicates
that the action terminated with an error. In this case the
variable cardActionError indicates the error code. |
| INT cardActionError | 1.3.6.1.4.1.434.2.2.2.2.1.9 | INTEGER | read-only | The error code displayed by an unsuccessful operation. |
| STR cardActionOutputFile | 1.3.6.1.4.1.434.2.2.2.2.1.10 | DisplayString | read-write | The name of file which contains the output of the requested
action, ex. 'dump' or 'test'. The default filename
is dump or test; where is the card number |
| INT cardProtocols | 1.3.6.1.4.1.434.2.2.2.2.1.11 | INTEGER | read-only | The mask indicating which protocols are installed on the card.
snapc=0x10, snafm=0x20, appc=0x40, llc=0x80,
xport_iso=0x200, xport_tgx=0x400, netview=0x800 |
| cardHardwareTable | 1.3.6.1.4.1.434.2.2.2.3 | | not-accessible | The table of the EiconCards as seen by the Agent. |
| cardHardwareEntry | 1.3.6.1.4.1.434.2.2.2.3.1 | | not-accessible | The set of hardware attributes for each card. |
| CAR cardHardCardRef | 1.3.6.1.4.1.434.2.2.2.3.1.1 | CardRef | read-only | The ID of the EiconCard that should match the cardIndex from the cardTable. |
| INT cardHardMemAddr | 1.3.6.1.4.1.434.2.2.2.3.1.2 | INTEGER | read-only | The EiconCard memory segment address. |
| INT cardHardIoAddr | 1.3.6.1.4.1.434.2.2.2.3.1.3 | INTEGER | read-only | The EiconCard IO address. |
| INT cardHardIntrLevel | 1.3.6.1.4.1.434.2.2.2.3.1.4 | INTEGER | read-only | The EiconCard interrupt level. |
| POR cardHardNbOfPorts | 1.3.6.1.4.1.434.2.2.2.3.1.5 | PortRef | read-only | The number of ports on the EiconCard. |
| INT cardHardSlotNumber | 1.3.6.1.4.1.434.2.2.2.3.1.6 | INTEGER | read-only | The slot number for MicroChannel. |
| STR cardHardVersion | 1.3.6.1.4.1.434.2.2.2.3.1.7 | DisplayString | read-only | The hardware version of the EiconCard. |
| NUM cardHardSerialNb | 1.3.6.1.4.1.434.2.2.2.3.1.8 | PositiveInteger | read-only | The EiconCard serial number. |
| STR cardHardComponents | 1.3.6.1.4.1.434.2.2.2.3.1.9 | DisplayString | read-only | The names of special hardware components. |
| cardSoftwareTable | 1.3.6.1.4.1.434.2.2.2.4 | | not-accessible | The table of all software modules (.elm) that are configured
for all EiconCards seen by the Agent.
The configuration file from the directory srvProductLocalDirName
will be used by the Agent to provide that information |
| cardSoftwareEntry | 1.3.6.1.4.1.434.2.2.2.4.1 | | not-accessible | The set of attributes for one software module and one card. |
| CAR cardSoftCardRef | 1.3.6.1.4.1.434.2.2.2.4.1.1 | CardRef | read-only | The ID of the EiconCard; should match the cardIndex from the cardTable. |
| NUM cardSoftModuleIndex | 1.3.6.1.4.1.434.2.2.2.4.1.2 | PositiveInteger | read-only | The module index number given by the Agent. |
| STR cardSoftModuleName | 1.3.6.1.4.1.434.2.2.2.4.1.3 | DisplayString | read-only | The module name. |
| STR cardSoftVersion | 1.3.6.1.4.1.434.2.2.2.4.1.4 | DisplayString | read-only | The module version string found inside the module. |
| STR cardSoftDateProd | 1.3.6.1.4.1.434.2.2.2.4.1.5 | DisplayString | read-only | The module production date found inside the module. |
| NUM cardSoftRealSize | 1.3.6.1.4.1.434.2.2.2.4.1.6 | PositiveInteger | read-only | The module size (in bytes). If the value is '0' then this entry is invalid. |
| cardBiosSessionTable | 1.3.6.1.4.1.434.2.2.2.5 | | not-accessible | The table of all sessions handled by the BIOS task for all cards. |
| cardBiosSessionEntry | 1.3.6.1.4.1.434.2.2.2.5.1 | | not-accessible | The set of attributes for one session and one card. |
| CAR cardBiosSsnCardRef | 1.3.6.1.4.1.434.2.2.2.5.1.1 | CardRef | read-only | The ID of the EiconCard; should match the cardIndex from the cardTable. |
| NUM cardBiosSsnIndex | 1.3.6.1.4.1.434.2.2.2.5.1.2 | PositiveInteger | read-only | The session index given by the Agent. |
| NUM cardBiosSsnLsn | 1.3.6.1.4.1.434.2.2.2.5.1.3 | PositiveInteger | read-only | The logical (BIOS) session number. |
| POR cardBiosSsnPortRef | 1.3.6.1.4.1.434.2.2.2.5.1.4 | PortRef | read-only | The reference of the port where the session is established; should match the portIndex
from the portTable. |
| INT cardBiosSsnOperState | 1.3.6.1.4.1.434.2.2.2.5.1.5 | INTEGER | read-only | The state of the session. |
| INT cardBiosSsnProtocol | 1.3.6.1.4.1.434.2.2.2.5.1.6 | INTEGER | read-only | The protocol used by the session. |
| STR cardBiosSsnApplName | 1.3.6.1.4.1.434.2.2.2.5.1.7 | DisplayString | read-only | The session Application Name |
| TIK cardBiosSsnStartTime | 1.3.6.1.4.1.434.2.2.2.5.1.8 | TimeTicks | read-only | The time elapsed in seconds since session esablishment time. |
