EICON-MIB-ROUTER :: rtCircuitBeforeComp

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › EICON-MIB-ROUTER › rtCircuitBeforeComp

rtCircuitBeforeComp

Module: EICON-MIB-ROUTER

OID (symbolic): EICON-MIB-ROUTER::rtCircuitBeforeComp

OID (numeric): 1.3.6.1.4.1.434.2.2.8.35.1.11

Node type: OBJECT-TYPE

Type: Gauge

Access: read-only

Description: Number of bytes sent before compression.

What is rtCircuitBeforeComp?

This reports the number of bytes sent on this circuit before compression was applied. An admin compares this against rtCircuitAfterComp to calculate the actual compression ratio being achieved on this live circuit. A ratio close to 1:1 despite compression being enabled would suggest the traffic mix isn't compressing well, such as already-compressed data.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.434.2.2.8.35.1.11
snmpwalk -v2c -c public <target> EICON-MIB-ROUTER::rtCircuitBeforeComp

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.434.2.2.8.35.1.11.1
snmpget -v2c -c public <target> EICON-MIB-ROUTER::rtCircuitBeforeComp.1

Start monitoring Eicon Technology WAN router with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EICON-MIB-ROUTER::rtCircuitBeforeComp OID value, configure state conditions and alerts, and monitor any Eicon Technology WAN router from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.434eiconECLAPBEXT-MIB
1.3.6.1.4.1.434.2managementECLAPBEXT-MIB
1.3.6.1.4.1.434.2.2mibv2ECLAPBEXT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.434.2.2.8routerEICON-MIB-ROUTER
1.3.6.1.4.1.434.2.2.8.35rtCircuitTableEICON-MIB-ROUTER
1.3.6.1.4.1.434.2.2.8.35.1rtCircuitEntryEICON-MIB-ROUTER
1.3.6.1.4.1.434.2.2.8.35.1.11rtCircuitBeforeCompEICON-MIB-ROUTER