EICON-MIB-ROUTER :: rtAdminStateCtr

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › EICON-MIB-ROUTER › rtAdminStateCtr

rtAdminStateCtr

Module: EICON-MIB-ROUTER

OID (symbolic): EICON-MIB-ROUTER::rtAdminStateCtr

OID (numeric): 1.3.6.1.4.1.434.2.2.8.6

Node type: OBJECT-TYPE

Type: AdminState

Access: read-write

Description: The administrative state of the router. Management station will change this value to start or stop the router.

What is rtAdminStateCtr?

This lets a management station start, stop, dump, or test the router software by writing the corresponding AdminState value. An admin sets it to stop(2) to gracefully take the router down for maintenance and start(1) to bring it back up remotely. Setting it to dump(3) or test(4) triggers a diagnostic action rather than a simple on/off state change.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.434.2.2.8.6
snmpwalk -v2c -c public <target> EICON-MIB-ROUTER::rtAdminStateCtr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.434.2.2.8.6.1
snmpget -v2c -c public <target> EICON-MIB-ROUTER::rtAdminStateCtr.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.434.2.2.8.6.1 s <value>

Start monitoring Eicon Technology WAN router with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EICON-MIB-ROUTER::rtAdminStateCtr OID value, configure state conditions and alerts, and monitor any Eicon Technology WAN router from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.434eiconECLAPBEXT-MIB
1.3.6.1.4.1.434.2managementECLAPBEXT-MIB
1.3.6.1.4.1.434.2.2mibv2ECLAPBEXT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.434.2.2.8routerEICON-MIB-ROUTER
1.3.6.1.4.1.434.2.2.8.6rtAdminStateCtrEICON-MIB-ROUTER