| OID symbolic | OID numeric | Type | Access | Description |
|---|
| eicon | 1.3.6.1.4.1.434 | | | |
| management | 1.3.6.1.4.1.434.2 | | | |
| mibv2 | 1.3.6.1.4.1.434.2.2 | | | |
| frame_relay | 1.3.6.1.4.1.434.2.2.4.32 | | | |
| NTF frDLCIStatusChange | 1.3.6.1.4.1.434.2.2.4.32.0.1 | | | This trap indicates that the indicated Virtual Circuit has changed state. It has either been created or invalidated, or has toggled between the active and inactive states. |
| frDlcmiTable | 1.3.6.1.4.1.434.2.2.4.32.1 | | not-accessible | The Parameters for the Data Link Connection Management
Interface for the frame relay service on this
interface. |
| frDlcmiEntry | 1.3.6.1.4.1.434.2.2.4.32.1.1 | | not-accessible | The Parameters for a particular Data Link Con-
nection Management Interface. |
| IND frDlcmiIfIndex | 1.3.6.1.4.1.434.2.2.4.32.1.1.1 | Index | read-only | The ifIndex value of the corresponding ifEn-
try. |
| INT frDlcmiState | 1.3.6.1.4.1.434.2.2.4.32.1.1.2 | INTEGER | read-write | This variable states which Data Link Connec-
tion Management scheme is active (and by impli-
cation, what DLCI it uses) on the Frame Relay
interface. |
| INT frDlcmiAddress | 1.3.6.1.4.1.434.2.2.4.32.1.1.3 | INTEGER | read-write | This variable states which address format is
in use on the Frame Relay interface. |
| INT frDlcmiAddressLen | 1.3.6.1.4.1.434.2.2.4.32.1.1.4 | INTEGER | read-write | This variable states which address length in
octets. In the case of Q922 format, the length
indicates the entire length of the address in-
cluding the control portion. |
| INT frDlcmiPollingInterval | 1.3.6.1.4.1.434.2.2.4.32.1.1.5 | INTEGER | read-write | This is the number of seconds between succes-
sive status enquiry messages. |
| INT frDlcmiFullEnquiryInterval | 1.3.6.1.4.1.434.2.2.4.32.1.1.6 | INTEGER | read-write | Number of status enquiry intervals that pass
before issuance of a full status enquiry mes-
sage. |
| INT frDlcmiErrorThreshold | 1.3.6.1.4.1.434.2.2.4.32.1.1.7 | INTEGER | read-write | This is the maximum number of unanswered
Status Enquiries the equipment shall accept be-
fore declaring the interface down. |
| INT frDlcmiMonitoredEvents | 1.3.6.1.4.1.434.2.2.4.32.1.1.8 | INTEGER | read-write | This is the number of status polling intervals
over which the error threshold is counted. For
example, if within 'MonitoredEvents' number of
events the station receives 'ErrorThreshold'
number of errors, the interface is marked as
down. |
| INT frDlcmiMaxSupportedVCs | 1.3.6.1.4.1.434.2.2.4.32.1.1.9 | INTEGER | read-write | The maximum number of Virtual Circuits allowed
for this interface. Usually dictated by the
Frame Relay network.
In response to a SET, if a value less than zero
or higher than the agent's maximal capability
is configured, the agent should respond bad-
Value |
| INT frDlcmiMulticast | 1.3.6.1.4.1.434.2.2.4.32.1.1.10 | INTEGER | read-write | This indicates whether the Frame Relay inter-
face is using a multicast service. |
| frCircuitTable | 1.3.6.1.4.1.434.2.2.4.32.2 | | not-accessible | A table containing information about specific Data
Link Connection Identifiers and corresponding virtual
circuits. |
| frCircuitEntry | 1.3.6.1.4.1.434.2.2.4.32.2.1 | | not-accessible | The information regarding a single Data Link
Connection Identifier. |
| IND frCircuitIfIndex | 1.3.6.1.4.1.434.2.2.4.32.2.1.1 | Index | read-only | The ifIndex Value of the ifEntry this virtual
circuit is layered onto. |
| DLC frCircuitDlci | 1.3.6.1.4.1.434.2.2.4.32.2.1.2 | DLCI | read-only | The Data Link Connection Identifier for this
virtual circuit. |
| INT frCircuitState | 1.3.6.1.4.1.434.2.2.4.32.2.1.3 | INTEGER | read-write | Indicates whether the particular virtual cir-
cuit is operational. In the absence of a Data
Link Connection Management Interface, virtual
circuit entries (rows) may be created by set-
ting virtual circuit state to 'active', or
deleted by changing Circuit state to 'invalid'.
Whether or not the row actually disappears is
left to the implementation, so this object may
actually read as 'invalid' for some arbitrary
length of time. It is also legal to set the
state of a virtual circuit to 'inactive' to
temporarily disable a given circuit. |
| CTR frCircuitReceivedFECNs | 1.3.6.1.4.1.434.2.2.4.32.2.1.4 | Counter | read-only | Number of frames received from the network in-
dicating forward congestion since the virtual
circuit was created. |
| CTR frCircuitReceivedBECNs | 1.3.6.1.4.1.434.2.2.4.32.2.1.5 | Counter | read-only | Number of frames received from the network in-
dicating backward congestion since the virtual
circuit was created. |
| CTR frCircuitSentFrames | 1.3.6.1.4.1.434.2.2.4.32.2.1.6 | Counter | read-only | The number of frames sent from this virtual
circuit since it was created. |
| CTR frCircuitSentOctets | 1.3.6.1.4.1.434.2.2.4.32.2.1.7 | Counter | read-only | The number of octets sent from this virtual
circuit since it was created. |
| CTR frCircuitReceivedFrames | 1.3.6.1.4.1.434.2.2.4.32.2.1.8 | Counter | read-only | Number of frames received over this virtual
circuit since it was created. |
| CTR frCircuitReceivedOctets | 1.3.6.1.4.1.434.2.2.4.32.2.1.9 | Counter | read-only | Number of octets received over this virtual
circuit since it was created. |
| TIK frCircuitCreationTime | 1.3.6.1.4.1.434.2.2.4.32.2.1.10 | TimeTicks | read-only | The value of sysUpTime when the virtual cir-
cuit was created, whether by the Data Link Con-
nection Management Interface or by a SetRe-
quest. |
| TIK frCircuitLastTimeChange | 1.3.6.1.4.1.434.2.2.4.32.2.1.11 | TimeTicks | read-only | The value of sysUpTime when last there was a
change in the virtual circuit state |
| INT frCircuitCommittedBurst | 1.3.6.1.4.1.434.2.2.4.32.2.1.12 | INTEGER | read-write | This variable indicates the maximum amount of
data, in bits, that the network agrees to
transfer under normal conditions, during the
measurement interval. |
| INT frCircuitExcessBurst | 1.3.6.1.4.1.434.2.2.4.32.2.1.13 | INTEGER | read-write | This variable indicates the maximum amount of
uncommitted data bits that the network will at-
tempt to deliver over the measurement interval.
By default, if not configured when creating the
entry, the Excess Information Burst Size is set
to the value of ifSpeed. |
| INT frCircuitThroughput | 1.3.6.1.4.1.434.2.2.4.32.2.1.14 | INTEGER | read-write | Throughput is the average number of 'Frame Re-
lay Information Field' bits transferred per
second across a user network interface in one
direction, measured over the measurement inter-
val.
If the configured committed burst rate and
throughput are both non-zero, the measurement
interval
T=frCircuitCommittedBurst/frCircuitThroughput.
If the configured committed burst rate and
throughput are both zero, the measurement in-
terval
T=frCircuitExcessBurst/ifSpeed. |
| frErrTable | 1.3.6.1.4.1.434.2.2.4.32.3 | | not-accessible | A table containing information about Errors on the
Frame Relay interface. |
| frErrEntry | 1.3.6.1.4.1.434.2.2.4.32.3.1 | | not-accessible | The error information for a single frame relay
interface. |
| IND frErrIfIndex | 1.3.6.1.4.1.434.2.2.4.32.3.1.1 | Index | read-only | The ifIndex Value of the corresponding ifEn-
try. |
| INT frErrType | 1.3.6.1.4.1.434.2.2.4.32.3.1.2 | INTEGER | read-only | The type of error that was last seen on this
interface. |
| OCT frErrData | 1.3.6.1.4.1.434.2.2.4.32.3.1.3 | OCTET STRING | read-only | An octet string containing as much of the er-
ror packet as possible. As a minimum, it must
contain the Q.922 Address or as much as was
delivered. It is desirable to include all in-
formation up to the PDU. |
| TIK frErrTime | 1.3.6.1.4.1.434.2.2.4.32.3.1.4 | TimeTicks | read-only | The value of sysUpTime at which the error was
detected. |
| frame_relay_globals | 1.3.6.1.4.1.434.2.2.4.32.4 | | | |
| INT frTrapState | 1.3.6.1.4.1.434.2.2.4.32.4.1 | INTEGER | read-write | This variable indicates whether the system
produces the frDLCIStatusChange trap. |
