All MIBs › DOCS-IETF-RFI-MIB
Organization: IETF IPCDN Working Group
Last Updated: 2003-03-02
Category: Domain: CATV/Cable, Standard: DOCSIS, Standard: IETF
Description:
Implements IETF DOCSIS Radio Frequency Interface (RFI) MIB for managing upstream and downstream CMTS channels.
Imported Objects
From IANAifType-MIB
| IANAifType |
From IF-MIB
| InterfaceIndexOrZero | |
| ifIndex | OBJECT-TYPE |
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressType |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 | |
| transmission |
From SNMPv2-TC
| MacAddress | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TimeInterval | |
| TimeStamp | |
| TruthValue |
What Is DOCS-IETF-RFI-MIB?
DOCS-IETF-RFI-MIB is the IETF/CableLabs DOCSIS 2.0 Radio Frequency Interface MIB, used for managing the RF characteristics of upstream and downstream channels on both Cable Modems (CM) and Cable Modem Termination Systems (CMTS). It exposes physical-layer configuration and status objects for downstream channels (frequency, width, modulation, interleave depth, power) and upstream channels (channel ID and related parameters), organized under base, downstream, and upstream object groups. Its core monitoring value is RF performance status: tracking downstream power levels and modulation profiles reveals signal quality degradation, and upstream channel parameters help diagnose noise or ingress issues affecting cable modem connectivity. It is a standards-based MIB that typically works alongside DOCS-IF-MIB/DOCS-IF3-MIB and vendor CMTS MIBs for a complete picture of DOCSIS plant health. It is deployed throughout HFC (hybrid fiber-coax) cable access networks on both CMTS headend equipment and subscriber cable modems. Engineers implementing or auditing this functionality typically reference the DOCS-IETF-RFI-MIB RFC/standard documentation for the authoritative specification.
IPNetwork Monitor allows you to monitor SNMP objects defined in DOCS-IETF-RFI-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
What Can Be Monitored
- downstream channel frequency
- downstream power level
- downstream modulation profile
- upstream channel configuration
- channel interleave depth
Supported Devices
- DOCSIS cable modem
- DOCSIS CMTS (cable modem termination system)
Monitoring Examples
An operator would poll docsIfDownstreamChannelTable/docsIfDownstreamChannelEntry for docsIfDownChannelFrequency, docsIfDownChannelPower, and docsIfDownChannelModulation to verify each downstream channel is operating at expected power and modulation profile, and check docsIfUpstreamChannelTable/docsIfUpChannelId for upstream channel configuration. A downstream channel showing power drifting low or an unexpected modulation fallback (e.g., from 256QAM to a lower order) would indicate plant noise or amplifier issues degrading signal quality. This RF-layer data under docsIfBaseObjects/docsIfCmObjects is fundamental to diagnosing cable plant health issues affecting subscriber connectivity.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| docsIfMib | 1.3.6.1.2.1.10.127 | This is the MIB Module for DOCSIS 2.0 compliant Radio Frequency (RF) interfaces in Cable Modems (CM) and Cable Modem Termination Systems (CMTS). | ||
| docsIfMibObjects | 1.3.6.1.2.1.10.127.1 | |||
| docsIfBaseObjects | 1.3.6.1.2.1.10.127.1.1 | |||
| docsIfDownstreamChannelTable | 1.3.6.1.2.1.10.127.1.1.1 | not-accessible | This table describes the attributes of downstream channels (frequency bands). | |
| docsIfDownstreamChannelEntry | 1.3.6.1.2.1.10.127.1.1.1.1 | not-accessible | An entry provides a list of attributes for a single Downstream channel. An entry in this table exists for each ifEntry with an ifType of docsCableDownstream(128). | |
| I32 docsIfDownChannelId | 1.3.6.1.2.1.10.127.1.1.1.1.1 | Integer32 | read-only | The Cable Modem Termination System (CMTS) identification of the downstream channel within this particular MAC interface. If the interface is down, the object returns the most current value. If the downstream channel ID is unknown, this object returns a value of 0. |
| I32 docsIfDownChannelFrequency | 1.3.6.1.2.1.10.127.1.1.1.1.2 | Integer32 | read-write | The center of the downstream frequency associated with this channel. This object will return the current tuner frequency. If a CMTS provides IF output, this object will return 0, unless this CMTS is in control of the final downstream RF frequency. See the associated compliance object for a description of valid frequencies that may be written to this object. |
| I32 docsIfDownChannelWidth | 1.3.6.1.2.1.10.127.1.1.1.1.3 | Integer32 | read-write | The bandwidth of this downstream channel. Most implementations are expected to support a channel width of 6 MHz (North America) and/or 8 MHz (Europe). See the associated compliance object for a description of the valid channel widths for this object. |
| INT docsIfDownChannelModulation | 1.3.6.1.2.1.10.127.1.1.1.1.4 | INTEGER | read-write | The modulation type associated with this downstream channel. If the interface is down, this object either returns the configured value (CMTS), the most current value (CM), or the value of unknown(1). See the associated conformance object for write conditions and limitations. See the reference for specifics on the modulation profiles implied by qam64 and qam256. |
| INT docsIfDownChannelInterleave | 1.3.6.1.2.1.10.127.1.1.1.1.5 | INTEGER | read-write | The Forward Error Correction (FEC) interleaving used for this downstream channel. Values are defined as follows: taps8Increment16(3): protection 5.9/4.1 usec, latency .22/.15 msec taps16Increment8(4): protection 12/8.2 usec, latency .48/.33 msec taps32Increment4(5): protection 24/16 usec, latency .98/.68 msec taps64Increment2(6): protection 47/33 usec, latency 2/1.4 msec taps128Increment1(7): protection 95/66 usec, latency 4/2.8 msec taps12increment17(8): protection 18/14 usec, latency 0.43/0.32 msec taps12increment17 is implemented in conformance with EuroDOCSIS document 'Adapted MIB-definitions - and a clarification for MPEG-related issues - for EuroDOCSIS cable modem systems' by tComLabs and should only be used for a EuroDOCSIS MAC interface. If the interface is down, this object either returns the configured value (CMTS), the most current value (CM), or the value of unknown(1). The value of other(2) is returned if the interleave is known but not defined in the above list. See the associated conformance object for write conditions and limitations. See the reference for the FEC configuration described by the setting of this object. |
| TEN docsIfDownChannelPower | 1.3.6.1.2.1.10.127.1.1.1.1.6 | TenthdBmV | read-write | At the CMTS, the operational transmit power. At the CM, the received power level. If the interface is down, this object either returns the configured value (CMTS), the most current value (CM) or the value of 0. See the associated conformance object for write conditions and limitations. See the reference for recommended and required power levels. |
| INT docsIfDownChannelAnnex | 1.3.6.1.2.1.10.127.1.1.1.1.7 | INTEGER | read-only | The value of this object indicates the conformance of the implementation to important regional cable standards. annexA : Annex A from ITU-J83 is used. annexB : Annex B from ITU-J83 is used. annexC : Annex C from ITU-J83 is used. AnnexB is used for DOCSIS implementations |
| docsIfUpstreamChannelTable | 1.3.6.1.2.1.10.127.1.1.2 | not-accessible | This table describes the attributes of attached upstream channels. | |
| docsIfUpstreamChannelEntry | 1.3.6.1.2.1.10.127.1.1.2.1 | not-accessible | List of attributes for a single upstream channel. For Docsis 2.0 CMTSs, an entry in this table exists for each ifEntry with an ifType of docsCableUpstreamChannel (205). For Docsis 1.x CM/CMTSs and Docsis 2.0 CMs, an entry in this table exists for each ifEntry with an ifType of docsCableUpstreamInterface (129). | |
| I32 docsIfUpChannelId | 1.3.6.1.2.1.10.127.1.1.2.1.1 | Integer32 | read-only | The CMTS identification of the upstream channel. |
| I32 docsIfUpChannelFrequency | 1.3.6.1.2.1.10.127.1.1.2.1.2 | Integer32 | read-create | The center of the frequency band associated with this upstream interface. This object returns 0 if the frequency is undefined or unknown. Minimum permitted upstream frequency is 5,000,000 Hz for current technology. See the associated conformance object for write conditions and limitations. |
| I32 docsIfUpChannelWidth | 1.3.6.1.2.1.10.127.1.1.2.1.3 | Integer32 | read-create | The bandwidth of this upstream interface. This object returns 0 if the interface width is undefined or unknown. Minimum permitted interface width is 200,000 Hz currently. See the associated conformance object for write conditions and limitations. |
| U32 docsIfUpChannelModulationProfile | 1.3.6.1.2.1.10.127.1.1.2.1.4 | Unsigned32 | read-create | An entry identical to the docsIfModIndex in the docsIfCmtsModulationTable that describes this channel. This channel is further instantiated there by a grouping of interval usage codes which together fully describe the channel modulation. This object returns 0 if the docsIfCmtsModulationTable entry does not exist or docsIfCmtsModulationTable is empty. See the associated conformance object for write conditions and limitations. |
| U32 docsIfUpChannelSlotSize | 1.3.6.1.2.1.10.127.1.1.2.1.5 | Unsigned32 | read-create | Applicable to TDMA and ATDMA channel types only. The number of 6.25 microsecond ticks in each upstream mini-slot. Returns zero if the value is undefined, unknown or in case of an SCDMA channel. See the associated conformance object for write conditions and limitations. |
| U32 docsIfUpChannelTxTimingOffset | 1.3.6.1.2.1.10.127.1.1.2.1.6 | Unsigned32 | read-only | At the CM, a measure of the current round trip time obtained from the ranging offset (initial ranging offset + ranging offset adjustments). At the CMTS, the maximum of timing offset, among all the CMs that are/were present on the channel, taking into account all ( initial + periodic ) timing offset corrections that were sent for each of the CMs. Generally, these measurements are positive, but if the measurements are negative, the value of this object is zero. Used for timing of CM upstream transmissions to ensure synchronized arrivals at the CMTS. Units are in terms of (6.25 microseconds/64). |
| I32 docsIfUpChannelRangingBackoffStart | 1.3.6.1.2.1.10.127.1.1.2.1.7 | Integer32 | read-create | The initial random backoff window to use when retrying Ranging Requests. Expressed as a power of 2. A value of 16 at the CMTS indicates that a proprietary adaptive retry mechanism is to be used. See the associated conformance object for write conditions and limitations. |
| I32 docsIfUpChannelRangingBackoffEnd | 1.3.6.1.2.1.10.127.1.1.2.1.8 | Integer32 | read-create | The final random backoff window to use when retrying Ranging Requests. Expressed as a power of 2. A value of 16 at the CMTS indicates that a proprietary adaptive retry mechanism is to be used. See the associated conformance object for write conditions and limitations. |
| I32 docsIfUpChannelTxBackoffStart | 1.3.6.1.2.1.10.127.1.1.2.1.9 | Integer32 | read-create | The initial random backoff window to use when retrying transmissions. Expressed as a power of 2. A value of 16 at the CMTS indicates that a proprietary adaptive retry mechanism is to be used. See the associated conformance object for write conditions and limitations. |
| I32 docsIfUpChannelTxBackoffEnd | 1.3.6.1.2.1.10.127.1.1.2.1.10 | Integer32 | read-create | The final random backoff window to use when retrying transmissions. Expressed as a power of 2. A value of 16 at the CMTS indicates that a proprietary adaptive retry mechanism is to be used. See the associated conformance object for write conditions and limitations. |
| U32 docsIfUpChannelScdmaActiveCodes | 1.3.6.1.2.1.10.127.1.1.2.1.11 | Unsigned32 | read-create | Applicable for SCDMA channel types only. Number of active codes. Returns zero for Non-SCDMA channel types. Note that legal values from 64..128 MUST be non-prime. |
| I32 docsIfUpChannelScdmaCodesPerSlot | 1.3.6.1.2.1.10.127.1.1.2.1.12 | Integer32 | read-create | Applicable for SCDMA channel types only. The number of SCDMA codes per mini-slot. Returns zero if the value is undefined, unknown or in case of a TDMA or ATDMA channel. |
| U32 docsIfUpChannelScdmaFrameSize | 1.3.6.1.2.1.10.127.1.1.2.1.13 | Unsigned32 | read-create | Applicable for SCDMA channel types only. SCDMA Frame size in units of spreading intervals. This value returns zero for non SCDMA Profiles. |
| U32 docsIfUpChannelScdmaHoppingSeed | 1.3.6.1.2.1.10.127.1.1.2.1.14 | Unsigned32 | read-create | Applicable for SCDMA channel types only. 15 bit seed used for code hopping sequence initialization. Returns zero for non-SCDMA channel types. |
| DOC docsIfUpChannelType | 1.3.6.1.2.1.10.127.1.1.2.1.15 | DocsisUpstreamType | read-create | Defines the Upstream channel type. Given the channel type, other channel attributes can be checked for value validity at the time of entry creation and update. |
| NUM docsIfUpChannelCloneFrom | 1.3.6.1.2.1.10.127.1.1.2.1.16 | InterfaceIndexOrZero | read-create | Intended for use when a temporary inactive upstream table row is created for the purpose of manipulating SCDMA parameters for an active row. Refer to the descriptions of docsIfUpChannelStatus and docsIfUpChannelUpdate for details of this procedure. This object contains the ifIndex value of the active upstream row whose SCDMA parameters are to be adjusted. Although this object was created to facilitate SCDMA parameter adjustment, it may also be used at the vendor's discretion for non-SCDMA parameter adjustment. This object must contain a value of zero for active upstream rows. |
| T/F docsIfUpChannelUpdate | 1.3.6.1.2.1.10.127.1.1.2.1.17 | TruthValue | read-create | Used to perform the transfer of adjusted SCDMA parameters from the temporary upstream row to the active upstream row indicated by the docsIfUpChannelCloneFrom object. The transfer is initiated through an SNMP SET of TRUE to this object. The SNMP SET will fail with a GEN_ERROR (snmpv1) or COMMIT_FAILED_ERROR (snmpv2c/v3) if the adjusted SCDMA parameter values are not compatible with each other. Although this object was created to facilitate SCDMA parameter adjustment, it may also be used at the vendor's discretion for non-SCDMA parameter adjustment. An SNMP GET of this object always returns FALSE. |
| ROW docsIfUpChannelStatus | 1.3.6.1.2.1.10.127.1.1.2.1.18 | RowStatus | read-create | This object is generally intended to be used for the creation of a temporary inactive upstream row for the purpose of adjusting the SCDMA channel parameters of an active upstream row. The recommended procedure is: 1) Create an inactive row through an SNMP SET using createAndWait(5). Use an ifIndex value outside the operational range of the system. 2) Set the docsIfUpChannelCloneFrom field to the ifIndex value of the active row whose SCDMA parameters require adjustment. 3) Adjust the SCDMA parameter values using the new temporary inactive row. 4) Update the active row by setting object docsIfUpChannelUpdate to TRUE. This SET will fail if the adjusted SCDMA parameters are not compatible with each other. 5) Delete the temporary row through an SNMP SET using DELETE. The following restrictions apply to this object: 1) This object must contain a value of active(1) for active rows. 2) Temporary inactive rows must be created using createAndWait(5). 3) The only possible status change of a row created using createAndWait(5) (ie notInService(2)) is to destroy(6). These temporary rows must never become active. 4) A status transition from active (1) to destroy (6) is not permitted. Entries with docsIfUpChannelStatus set to active(1) are logically linked to a physical interface, not temporarily created to clone parameters. The Interface MIB [RFC2863] ifAdminStatus should be used to take an Upstream Channel offline. Although this object was created to facilitate SCDMA parameter adjustment, it may also be used at the vendor's discretion for non-SCDMA parameter adjustment. |
| T/F docsIfUpChannelPreEqEnable | 1.3.6.1.2.1.10.127.1.1.2.1.19 | TruthValue | read-create | At the CMTS, used to enable or disable pre-equalization on the upstream channel represented by this table instance. At the CM, this object is read-only and reflects the status of pre-equalization as represented in the RNG-RSP. |
| docsIfQosProfileTable | 1.3.6.1.2.1.10.127.1.1.3 | not-accessible | Describes the attributes for each class of service. | |
| docsIfQosProfileEntry | 1.3.6.1.2.1.10.127.1.1.3.1 | not-accessible | Describes the attributes for a single class of service. If implemented as read-create in the Cable Modem Termination System, creation of entries in this table is controlled by the value of docsIfCmtsQosProfilePermissions. If implemented as read-only, entries are created based on information in REG-REQ MAC messages received from Cable Modems (Cable Modem Termination System implementation), or based on information extracted from the TFTP option file (Cable Modem implementation). In the Cable Modem Termination system, read-only entries are removed if no longer referenced by docsIfCmtsServiceTable. An entry in this table must not be removed while it is referenced by an entry in docsIfCmServiceTable (Cable Modem) or docsIfCmtsServiceTable (Cable Modem Termination System). An entry in this table should not be changeable while it is referenced by an entry in docsIfCmtsServiceTable. If this table is created automatically, there should only be a single entry for each Class of Service. Multiple entries with the same Class of Service parameters are not recommended. | |
| I32 docsIfQosProfIndex | 1.3.6.1.2.1.10.127.1.1.3.1.1 | Integer32 | not-accessible | The index value that uniquely identifies an entry in the docsIfQosProfileTable. |
| I32 docsIfQosProfPriority | 1.3.6.1.2.1.10.127.1.1.3.1.2 | Integer32 | read-create | A relative priority assigned to this service when allocating bandwidth. Zero indicates lowest priority and seven indicates highest priority. Interpretation of priority is device-specific. MUST NOT be changed while this row is active. |
| I32 docsIfQosProfMaxUpBandwidth | 1.3.6.1.2.1.10.127.1.1.3.1.3 | Integer32 | read-create | The maximum upstream bandwidth, in bits per second, allowed for a service with this service class. Zero if there is no restriction of upstream bandwidth. MUST NOT be changed while this row is active. |
| I32 docsIfQosProfGuarUpBandwidth | 1.3.6.1.2.1.10.127.1.1.3.1.4 | Integer32 | read-create | Minimum guaranteed upstream bandwidth, in bits per second, allowed for a service with this service class. MUST NOT be changed while this row is active. |
| I32 docsIfQosProfMaxDownBandwidth | 1.3.6.1.2.1.10.127.1.1.3.1.5 | Integer32 | read-create | The maximum downstream bandwidth, in bits per second, allowed for a service with this service class. Zero if there is no restriction of downstream bandwidth. MUST NOT be changed while this row is active. |
| I32 docsIfQosProfMaxTxBurst | 1.3.6.1.2.1.10.127.1.1.3.1.6 | Integer32 | read-create | The maximum number of mini-slots that may be requested for a single upstream transmission. A value of zero means there is no limit. MUST NOT be changed while this row is active. This object has been deprecated and replaced by docsIfQosProfMaxTransmitBurst, to fix a mismatch of the units and value range with respect to the DOCSIS Maximum Upstream Channel Transmit Burst Configuration Setting. |
| T/F docsIfQosProfBaselinePrivacy | 1.3.6.1.2.1.10.127.1.1.3.1.7 | TruthValue | read-create | Indicates whether Baseline Privacy is enabled for this service class. MUST NOT be changed while this row is active. |
| ROW docsIfQosProfStatus | 1.3.6.1.2.1.10.127.1.1.3.1.8 | RowStatus | read-create | This is object is to used to create or delete rows in this table. This object MUST NOT be changed from active while the row is referenced by the any entry in either docsIfCmServiceTable (on the CM), or the docsIfCmtsServiceTable (on the CMTS). |
| I32 docsIfQosProfMaxTransmitBurst | 1.3.6.1.2.1.10.127.1.1.3.1.9 | Integer32 | read-create | The maximum number of bytes that may be requested for a single upstream transmission. A value of zero means there is no limit. Note: This value does not include any physical layer overhead. MUST NOT be changed while this row is active. |
| docsIfSignalQualityTable | 1.3.6.1.2.1.10.127.1.1.4 | not-accessible | At the CM, describes the PHY signal quality of downstream channels. At the CMTS, describes the PHY signal quality of upstream channels. At the CMTS, this table may exclude contention intervals. | |
| docsIfSignalQualityEntry | 1.3.6.1.2.1.10.127.1.1.4.1 | not-accessible | At the CM, describes the PHY characteristics of a downstream channel. At the CMTS, describes the PHY signal quality of an upstream channel. An entry in this table exists for each ifEntry with an ifType of docsCableDownstream(128) for Cable Modems. For Docsis 1.1 Cable Modem Termination Systems, an entry exists for each ifEntry with an ifType of docsCableUpstream (129). For Docsis 2.0 Cable Modem Termination Systems, an entry exists for each ifEntry with an ifType of docsCableUpstreamChannel (205). | |
| T/F docsIfSigQIncludesContention | 1.3.6.1.2.1.10.127.1.1.4.1.1 | TruthValue | read-only | true(1) if this CMTS includes contention intervals in the counters in this table. Always false(2) for CMs. |
| C32 docsIfSigQUnerroreds | 1.3.6.1.2.1.10.127.1.1.4.1.2 | Counter32 | read-only | Codewords received on this channel without error. This includes all codewords, whether or not they were part of frames destined for this device. |
| C32 docsIfSigQCorrecteds | 1.3.6.1.2.1.10.127.1.1.4.1.3 | Counter32 | read-only | Codewords received on this channel with correctable errors. This includes all codewords, whether or not they were part of frames destined for this device. |
| C32 docsIfSigQUncorrectables | 1.3.6.1.2.1.10.127.1.1.4.1.4 | Counter32 | read-only | Codewords received on this channel with uncorrectable errors. This includes all codewords, whether or not they were part of frames destined for this device. |
| TEN docsIfSigQSignalNoise | 1.3.6.1.2.1.10.127.1.1.4.1.5 | TenthdB | read-only | Signal/Noise ratio as perceived for this channel. At the CM, describes the Signal/Noise of the downstream channel. At the CMTS, describes the average Signal/Noise of the upstream channel. |
| I32 docsIfSigQMicroreflections | 1.3.6.1.2.1.10.127.1.1.4.1.6 | Integer32 | read-only | Total microreflections including in-channel response as perceived on this interface, measured in dBc below the signal level. This object is not assumed to return an absolutely accurate value, but should give a rough indication of microreflections received on this interface. It is up to the implementer to provide information as accurate as possible. |
| OCT docsIfSigQEqualizationData | 1.3.6.1.2.1.10.127.1.1.4.1.7 | OCTET STRING | read-only | At the CM, returns the equalization data for the downstream channel. At the CMTS, returns the average equalization data for the upstream channel. Returns an empty string if the value is unknown or if there is no equalization data available or defined. |
| C64 docsIfSigQExtUnerroreds | 1.3.6.1.2.1.10.127.1.1.4.1.8 | Counter64 | read-only | Codewords received on this channel without error. This includes all codewords, whether or not they were part of frames destined for this device. This is the 64 bit version of docsIfSigQUnerroreds. |
| C64 docsIfSigQExtCorrecteds | 1.3.6.1.2.1.10.127.1.1.4.1.9 | Counter64 | read-only | Codewords received on this channel with correctable errors. This includes all codewords, whether or not they were part of frames destined for this device. This is the 64 bit version of docsIfSigQCorrecteds. |
| C64 docsIfSigQExtUncorrectables | 1.3.6.1.2.1.10.127.1.1.4.1.10 | Counter64 | read-only | Codewords received on this channel with uncorrectable errors. This includes all codewords, whether or not they were part of frames destined for this device. This is the 64 bit version of docsIfSigQUncorrectables. |
| DOC docsIfDocsisBaseCapability | 1.3.6.1.2.1.10.127.1.1.5 | DocsisVersion | read-only | Indication of the DOCSIS capability of the device. This object mirrors docsIfDocsisCapability from the DocsIfExt mib. |
| docsIfCmObjects | 1.3.6.1.2.1.10.127.1.2 | |||
| docsIfCmMacTable | 1.3.6.1.2.1.10.127.1.2.1 | not-accessible | Describes the attributes of each CM MAC interface, extending the information available from ifEntry. | |
| docsIfCmMacEntry | 1.3.6.1.2.1.10.127.1.2.1.1 | not-accessible | An entry containing objects describing attributes of each MAC entry, extending the information in ifEntry. An entry in this table exists for each ifEntry with an ifType of docsCableMaclayer(127). | |
| MAC docsIfCmCmtsAddress | 1.3.6.1.2.1.10.127.1.2.1.1.1 | MacAddress | read-only | Identifies the CMTS that is believed to control this MAC domain. At the CM, this will be the source address from SYNC, MAP, and other MAC-layer messages. If the CMTS is unknown, returns 00-00-00-00-00-00. |
| BIT docsIfCmCapabilities | 1.3.6.1.2.1.10.127.1.2.1.1.2 | Bits | read-only | Identifies the capabilities of the MAC implementation at this interface. Note that packet transmission is always supported. Therefore, there is no specific bit required to explicitly indicate this capability. Note that BITS objects are encoded most significant bit first. For example, if bit 1 is set, the value of this object is the octet string '40'H. |
| TIK docsIfCmRangingRespTimeout | 1.3.6.1.2.1.10.127.1.2.1.1.3 | TimeTicks | read-write | Waiting time for a Ranging Response packet. |
| NUM docsIfCmRangingTimeout | 1.3.6.1.2.1.10.127.1.2.1.1.4 | TimeInterval | read-write | Waiting time for a Ranging Response packet. |
| docsIfCmStatusTable | 1.3.6.1.2.1.10.127.1.2.2 | not-accessible | This table maintains a number of status objects and counters for Cable Modems. | |
| docsIfCmStatusEntry | 1.3.6.1.2.1.10.127.1.2.2.1 | not-accessible | A set of status objects and counters for a single MAC layer instance in a Cable Modem. An entry in this table exists for each ifEntry with an ifType of docsCableMaclayer(127). | |
| INT docsIfCmStatusValue | 1.3.6.1.2.1.10.127.1.2.2.1.1 | INTEGER | read-only | Current Cable Modem connectivity state, as specified in the RF Interface Specification. Interpretations for state values 1-12 are clearly outlined in the SP-RFI reference given below. As stated in the description for object docsIfCmtsCmStatusValue, accessDenied(13)indicates the CMTS has sent a Registration Aborted message to the CM. |
| OCT docsIfCmStatusCode | 1.3.6.1.2.1.10.127.1.2.2.1.2 | OCTET STRING | read-only | Status code for this Cable Modem as defined in the OSSI Specification. The status code consists of a single character indicating error groups, followed by a two- or three-digit number indicating the status condition, followed by a decimal. |
| TEN docsIfCmStatusTxPower | 1.3.6.1.2.1.10.127.1.2.2.1.3 | TenthdBmV | read-only | The operational transmit power for the attached upstream channel. |
| C32 docsIfCmStatusResets | 1.3.6.1.2.1.10.127.1.2.2.1.4 | Counter32 | read-only | Number of times the CM reset or initialized this interface. |
| C32 docsIfCmStatusLostSyncs | 1.3.6.1.2.1.10.127.1.2.2.1.5 | Counter32 | read-only | Number of times the CM lost synchronization with the downstream channel. |
| C32 docsIfCmStatusInvalidMaps | 1.3.6.1.2.1.10.127.1.2.2.1.6 | Counter32 | read-only | Number of times the CM received invalid MAP messages. |
| C32 docsIfCmStatusInvalidUcds | 1.3.6.1.2.1.10.127.1.2.2.1.7 | Counter32 | read-only | Number of times the CM received invalid UCD messages. |
| C32 docsIfCmStatusInvalidRangingResponses | 1.3.6.1.2.1.10.127.1.2.2.1.8 | Counter32 | read-only | Number of times the CM received invalid ranging response messages. |
| C32 docsIfCmStatusInvalidRegistrationResponses | 1.3.6.1.2.1.10.127.1.2.2.1.9 | Counter32 | read-only | Number of times the CM received invalid registration response messages. |
| C32 docsIfCmStatusT1Timeouts | 1.3.6.1.2.1.10.127.1.2.2.1.10 | Counter32 | read-only | Number of times counter T1 expired in the CM. |
| C32 docsIfCmStatusT2Timeouts | 1.3.6.1.2.1.10.127.1.2.2.1.11 | Counter32 | read-only | Number of times counter T2 expired in the CM. |
| C32 docsIfCmStatusT3Timeouts | 1.3.6.1.2.1.10.127.1.2.2.1.12 | Counter32 | read-only | Number of times counter T3 expired in the CM. |
| C32 docsIfCmStatusT4Timeouts | 1.3.6.1.2.1.10.127.1.2.2.1.13 | Counter32 | read-only | Number of times counter T4 expired in the CM. |
| C32 docsIfCmStatusRangingAborteds | 1.3.6.1.2.1.10.127.1.2.2.1.14 | Counter32 | read-only | Number of times the ranging process was aborted by the CMTS. |
| DOC docsIfCmStatusDocsisOperMode | 1.3.6.1.2.1.10.127.1.2.2.1.15 | DocsisQosVersion | read-only | Indication whether the device has registered using 1.0 Class of Service or 1.1 Quality of Service. An unregistered CM should indicate 1.1 QOS for a docsIfDocsisBaseCapability value of Docsis 1.1/2.0. An unregistered CM should indicate 1.0 COS for a docsIfDocsisBaseCapability value of Docsis 1.0. This object mirrors docsIfCmDocsisOperMode from the docsIfExt mib. |
| DOC docsIfCmStatusModulationType | 1.3.6.1.2.1.10.127.1.2.2.1.16 | DocsisUpstreamTypeStatus | read-only | Indicates modulation type status currently used by the CM. Since this object specifically identifies PHY mode, the shared upstream channel type is not permitted. |
| OCT docsIfCmStatusEqualizationData | 1.3.6.1.2.1.10.127.1.2.2.1.17 | OCTET STRING | read-only | Pre-equalization data for this CM after convolution with data indicated in the RNG-RSP. Returns an empty string if the value is unknown or if there is no equalization data available or defined. The value should be formatted as defined in the following REFERENCE. |
| docsIfCmServiceTable | 1.3.6.1.2.1.10.127.1.2.3 | not-accessible | Describes the attributes of each upstream service queue on a CM. | |
| docsIfCmServiceEntry | 1.3.6.1.2.1.10.127.1.2.3.1 | not-accessible | Describes the attributes of an upstream bandwidth service queue. An entry in this table exists for each Service ID. The primary index is an ifIndex with an ifType of docsCableMaclayer(127). | |
| I32 docsIfCmServiceId | 1.3.6.1.2.1.10.127.1.2.3.1.1 | Integer32 | not-accessible | Identifies a service queue for upstream bandwidth. The attributes of this service queue are shared between the CM and the CMTS. The CMTS allocates upstream bandwidth to this service queue based on requests from the CM and on the class of service associated with this queue. |
| I32 docsIfCmServiceQosProfile | 1.3.6.1.2.1.10.127.1.2.3.1.2 | Integer32 | read-only | The index in docsIfQosProfileTable describing the quality of service attributes associated with this particular service. If no associated entry in docsIfQosProfileTable exists, this object returns a value of zero. |
| C32 docsIfCmServiceTxSlotsImmed | 1.3.6.1.2.1.10.127.1.2.3.1.3 | Counter32 | read-only | The number of upstream mini-slots which have been used to transmit data PDUs in immediate (contention) mode. This includes only those PDUs that are presumed to have arrived at the headend (i.e., those which were explicitly acknowledged.) It does not include retransmission attempts or mini-slots used by Requests. |
| C32 docsIfCmServiceTxSlotsDed | 1.3.6.1.2.1.10.127.1.2.3.1.4 | Counter32 | read-only | The number of upstream mini-slots which have been used to transmit data PDUs in dedicated mode (i.e., as a result of a unicast Data Grant). |
| C32 docsIfCmServiceTxRetries | 1.3.6.1.2.1.10.127.1.2.3.1.5 | Counter32 | read-only | The number of attempts to transmit data PDUs containing requests for acknowledgment that did not result in acknowledgment. |
| C32 docsIfCmServiceTxExceededs | 1.3.6.1.2.1.10.127.1.2.3.1.6 | Counter32 | read-only | The number of data PDUs transmission failures due to excessive retries without acknowledgment. |
| C32 docsIfCmServiceRqRetries | 1.3.6.1.2.1.10.127.1.2.3.1.7 | Counter32 | read-only | The number of attempts to transmit bandwidth requests which did not result in acknowledgment. |
| C32 docsIfCmServiceRqExceededs | 1.3.6.1.2.1.10.127.1.2.3.1.8 | Counter32 | read-only | The number of requests for bandwidth which failed due to excessive retries without acknowledgment. |
| C64 docsIfCmServiceExtTxSlotsImmed | 1.3.6.1.2.1.10.127.1.2.3.1.9 | Counter64 | read-only | The number of upstream mini-slots which have been used to transmit data PDUs in immediate (contention) mode. This includes only those PDUs that are presumed to have arrived at the headend (i.e., those which were explicitly acknowledged.) It does not include retransmission attempts or mini-slots used by Requests. |
| C64 docsIfCmServiceExtTxSlotsDed | 1.3.6.1.2.1.10.127.1.2.3.1.10 | Counter64 | read-only | The number of upstream mini-slots which have been used to transmit data PDUs in dedicated mode (i.e., as a result of a unicast Data Grant). |
| docsIfCmtsObjects | 1.3.6.1.2.1.10.127.1.3 | |||
| docsIfCmtsMacTable | 1.3.6.1.2.1.10.127.1.3.1 | not-accessible | Describes the attributes of each CMTS MAC interface, extending the information available from ifEntry. Mandatory for all CMTS devices. | |
| docsIfCmtsMacEntry | 1.3.6.1.2.1.10.127.1.3.1.1 | not-accessible | An entry containing objects describing attributes of each MAC entry, extending the information in ifEntry. An entry in this table exists for each ifEntry with an ifType of docsCableMaclayer(127). | |
| BIT docsIfCmtsCapabilities | 1.3.6.1.2.1.10.127.1.3.1.1.1 | Bits | read-only | Identifies the capabilities of the CMTS MAC implementation at this interface. Note that packet transmission is always supported. Therefore, there is no specific bit required to explicitly indicate this capability. Note that BITS objects are encoded most significant bit first. For example, if bit 1 is set, the value of this object is the octet string '40'H. |
| I32 docsIfCmtsSyncInterval | 1.3.6.1.2.1.10.127.1.3.1.1.2 | Integer32 | read-write | The interval between CMTS transmission of successive SYNC messages at this interface. |
| I32 docsIfCmtsUcdInterval | 1.3.6.1.2.1.10.127.1.3.1.1.3 | Integer32 | read-write | The interval between CMTS transmission of successive Upstream Channel Descriptor messages for each upstream channel at this interface. |
| I32 docsIfCmtsMaxServiceIds | 1.3.6.1.2.1.10.127.1.3.1.1.4 | Integer32 | read-only | The maximum number of service IDs that may be simultaneously active. |
| TIK docsIfCmtsInsertionInterval | 1.3.6.1.2.1.10.127.1.3.1.1.5 | TimeTicks | read-write | The amount of time to elapse between each broadcast station maintenance grant. Broadcast station maintenance grants are used to allow new cable modems to join the network. Zero indicates that a vendor-specific algorithm is used instead of a fixed time. Maximum amount of time permitted by the specification is 2 seconds. |
| I32 docsIfCmtsInvitedRangingAttempts | 1.3.6.1.2.1.10.127.1.3.1.1.6 | Integer32 | read-write | The maximum number of attempts to make on invitations for ranging requests. A value of zero means the system should attempt to range forever. |
| NUM docsIfCmtsInsertInterval | 1.3.6.1.2.1.10.127.1.3.1.1.7 | TimeInterval | read-write | The amount of time to elapse between each broadcast station maintenance grant. Broadcast station maintenance grants are used to allow new cable modems to join the network. Zero indicates that a vendor-specific algorithm is used instead of a fixed time. Maximum amount of time permitted by the specification is 2 seconds. |
| docsIfCmtsStatusTable | 1.3.6.1.2.1.10.127.1.3.2 | not-accessible | For the MAC layer, this group maintains a number of status objects and counters. | |
| docsIfCmtsStatusEntry | 1.3.6.1.2.1.10.127.1.3.2.1 | not-accessible | Status entry for a single MAC layer. An entry in this table exists for each ifEntry with an ifType of docsCableMaclayer(127). | |
| C32 docsIfCmtsStatusInvalidRangeReqs | 1.3.6.1.2.1.10.127.1.3.2.1.1 | Counter32 | read-only | This object counts invalid RNG-REQ messages received on this interface. |
| C32 docsIfCmtsStatusRangingAborteds | 1.3.6.1.2.1.10.127.1.3.2.1.2 | Counter32 | read-only | This object counts ranging attempts that were explicitly aborted by the CMTS. |
| C32 docsIfCmtsStatusInvalidRegReqs | 1.3.6.1.2.1.10.127.1.3.2.1.3 | Counter32 | read-only | This object counts invalid REG-REQ messages received on this interface. That is, syntax, out of range parameters, or erroneous requests. |
| C32 docsIfCmtsStatusFailedRegReqs | 1.3.6.1.2.1.10.127.1.3.2.1.4 | Counter32 | read-only | This object counts failed registration attempts. Included are docsIfCmtsStatusInvalidRegReqs, authentication and class of service failures. |
| C32 docsIfCmtsStatusInvalidDataReqs | 1.3.6.1.2.1.10.127.1.3.2.1.5 | Counter32 | read-only | This object counts invalid data request messages received on this interface. |
| C32 docsIfCmtsStatusT5Timeouts | 1.3.6.1.2.1.10.127.1.3.2.1.6 | Counter32 | read-only | This object counts the number of times counter T5 expired on this interface. |
| docsIfCmtsCmStatusTable | 1.3.6.1.2.1.10.127.1.3.3 | not-accessible | A set of objects in the CMTS, maintained for each Cable Modem connected to this CMTS. | |
| docsIfCmtsCmStatusEntry | 1.3.6.1.2.1.10.127.1.3.3.1 | not-accessible | Status information for a single Cable Modem. An entry in this table exists for each Cable Modem that is connected to the CMTS implementing this table. | |
| I32 docsIfCmtsCmStatusIndex | 1.3.6.1.2.1.10.127.1.3.3.1.1 | Integer32 | not-accessible | Index value to uniquely identify an entry in this table. For an individual Cable Modem, this index value should not change during CMTS uptime. |
| MAC docsIfCmtsCmStatusMacAddress | 1.3.6.1.2.1.10.127.1.3.3.1.2 | MacAddress | read-only | MAC address of this Cable Modem. If the Cable Modem has multiple MAC addresses, this is the MAC address associated with the Cable interface. |
| IP docsIfCmtsCmStatusIpAddress | 1.3.6.1.2.1.10.127.1.3.3.1.3 | IpAddress | read-only | IP address of this Cable Modem. If the Cable Modem has no IP address assigned, or the IP address is unknown, this object returns a value of 0.0.0.0. If the Cable Modem has multiple IP addresses, this object returns the IP address associated with the Cable interface. This object has been deprecated and replaced by docsIfCmtsCmStatusInetAddressType and docsIfCmtsCmStatusInetAddress, to enable IPv6 addressing in the future. |
| NUM docsIfCmtsCmStatusDownChannelIfIndex | 1.3.6.1.2.1.10.127.1.3.3.1.4 | InterfaceIndexOrZero | read-only | IfIndex of the downstream channel this CM is connected to. If the downstream channel is unknown, this object returns a value of zero. |
| NUM docsIfCmtsCmStatusUpChannelIfIndex | 1.3.6.1.2.1.10.127.1.3.3.1.5 | InterfaceIndexOrZero | read-only | IfIndex of the upstream channel this CM is connected to. If the upstream channel is unknown, this object returns a value of zero. |
| TEN docsIfCmtsCmStatusRxPower | 1.3.6.1.2.1.10.127.1.3.3.1.6 | TenthdBmV | read-only | The receive power as perceived for upstream data from this Cable Modem. If the receive power is unknown, this object returns a value of zero. |
| U32 docsIfCmtsCmStatusTimingOffset | 1.3.6.1.2.1.10.127.1.3.3.1.7 | Unsigned32 | read-only | A measure of the current round trip time for this CM. Used for timing of CM upstream transmissions to ensure synchronized arrivals at the CMTS. Units are in terms of 6.25 microseconds/(64*256). Returns zero if the value is unknown. |
| OCT docsIfCmtsCmStatusEqualizationData | 1.3.6.1.2.1.10.127.1.3.3.1.8 | OCTET STRING | read-only | Equalization data for this CM. Returns an empty string if the value is unknown or if there is no equalization data available or defined. |
| INT docsIfCmtsCmStatusValue | 1.3.6.1.2.1.10.127.1.3.3.1.9 | INTEGER | read-only | Current Cable Modem connectivity state, as specified in the RF Interface Specification. Returned status information is the CM status as assumed by the CMTS, and indicates the following events: other(1) Any state other than below. ranging(2) The CMTS has received an Initial Ranging Request message from the CM, and the ranging process is not yet complete. rangingAborted(3) The CMTS has sent a Ranging Abort message to the CM. rangingComplete(4) The CMTS has sent a Ranging Complete message to the CM. ipComplete(5) The CMTS has received a DHCP reply message and forwarded it to the CM. registrationComplete(6) The CMTS has sent a Registration Response message to the CM. accessDenied(7) The CMTS has sent a Registration Aborted message to the CM. operational(8) If Baseline Privacy is enabled for the CM, the CMTS has completed Baseline Privacy initialization. If Baseline Privacy is not enabled, equivalent to registrationComplete. The CMTS only needs to report states it is able to detect. |
| C32 docsIfCmtsCmStatusUnerroreds | 1.3.6.1.2.1.10.127.1.3.3.1.10 | Counter32 | read-only | Codewords received without error from this Cable Modem. |
| C32 docsIfCmtsCmStatusCorrecteds | 1.3.6.1.2.1.10.127.1.3.3.1.11 | Counter32 | read-only | Codewords received with correctable errors from this Cable Modem. |
| C32 docsIfCmtsCmStatusUncorrectables | 1.3.6.1.2.1.10.127.1.3.3.1.12 | Counter32 | read-only | Codewords received with uncorrectable errors from this Cable Modem. |
| TEN docsIfCmtsCmStatusSignalNoise | 1.3.6.1.2.1.10.127.1.3.3.1.13 | TenthdB | read-only | Signal/Noise ratio as perceived for upstream data from this Cable Modem. If the Signal/Noise is unknown, this object returns a value of zero. |
| I32 docsIfCmtsCmStatusMicroreflections | 1.3.6.1.2.1.10.127.1.3.3.1.14 | Integer32 | read-only | Total microreflections including in-channel response as perceived on this interface, measured in dBc below the signal level. This object is not assumed to return an absolutely accurate value, but should give a rough indication of microreflections received on this interface. It is up to the implementer to provide information as accurate as possible. |
| C64 docsIfCmtsCmStatusExtUnerroreds | 1.3.6.1.2.1.10.127.1.3.3.1.15 | Counter64 | read-only | Codewords received without error from this Cable Modem. |
| C64 docsIfCmtsCmStatusExtCorrecteds | 1.3.6.1.2.1.10.127.1.3.3.1.16 | Counter64 | read-only | Codewords received with correctable errors from this Cable Modem. |
| C64 docsIfCmtsCmStatusExtUncorrectables | 1.3.6.1.2.1.10.127.1.3.3.1.17 | Counter64 | read-only | Codewords received with uncorrectable errors from this Cable Modem. |
| DOC docsIfCmtsCmStatusDocsisRegMode | 1.3.6.1.2.1.10.127.1.3.3.1.18 | DocsisQosVersion | read-only | Indication whether the CM has registered using 1.0 Class of Service or 1.1 Quality of Service. This object mirrors docsIfCmtsCmStatusDocsisMode from the docsIfExt mib. |
| DOC docsIfCmtsCmStatusModulationType | 1.3.6.1.2.1.10.127.1.3.3.1.19 | DocsisUpstreamTypeStatus | read-only | Indicates modulation type currently used by the CM. Since this object specifically identifies PHY mode, the shared type is not permitted. If the upstream channel is unknown, this object returns a value of zero. |
| IPt docsIfCmtsCmStatusInetAddressType | 1.3.6.1.2.1.10.127.1.3.3.1.20 | InetAddressType | read-only | The type of internet address of docsIfCmtsCmStatusInetAddress. If the cable modem Internet address is unassigned or unknown, then the value of this object is unknown(0). |
| IP docsIfCmtsCmStatusInetAddress | 1.3.6.1.2.1.10.127.1.3.3.1.21 | InetAddress | read-only | Internet address of this Cable Modem. If the Cable Modem has no Internet address assigned, or the Internet address is unknown, the value of this object is the empty string. If the Cable Modem has multiple Internet addresses, this object returns the Internet address associated with the Cable (i.e. RF MAC) interface. |
| docsIfCmtsServiceTable | 1.3.6.1.2.1.10.127.1.3.4 | not-accessible | Describes the attributes of upstream service queues in a Cable Modem Termination System. | |
| docsIfCmtsServiceEntry | 1.3.6.1.2.1.10.127.1.3.4.1 | not-accessible | Describes the attributes of a single upstream bandwidth service queue. Entries in this table exist for each ifEntry with an ifType of docsCableMaclayer(127), and for each service queue (Service ID) within this MAC layer. Entries in this table are created with the creation of individual Service IDs by the MAC layer and removed when a Service ID is removed. | |
| I32 docsIfCmtsServiceId | 1.3.6.1.2.1.10.127.1.3.4.1.1 | Integer32 | not-accessible | Identifies a service queue for upstream bandwidth. The attributes of this service queue are shared between the Cable Modem and the Cable Modem Termination System. The CMTS allocates upstream bandwidth to this service queue based on requests from the CM and on the class of service associated with this queue. |
| I32 docsIfCmtsServiceCmStatusIndex | 1.3.6.1.2.1.10.127.1.3.4.1.2 | Integer32 | read-only | Pointer to an entry in docsIfCmtsCmStatusTable identifying the Cable Modem using this Service Queue. If multiple Cable Modems are using this Service Queue, the value of this object is zero. This object has been deprecated and replaced by docsIfCmtsServiceNewCmStatusIndex, to fix a mismatch of the value range with respect to docsIfCmtsCmStatusIndex (1..2147483647). |
| INT docsIfCmtsServiceAdminStatus | 1.3.6.1.2.1.10.127.1.3.4.1.3 | INTEGER | read-write | Allows a service class for a particular modem to be suppressed, (re-)enabled, or deleted altogether. |
| I32 docsIfCmtsServiceQosProfile | 1.3.6.1.2.1.10.127.1.3.4.1.4 | Integer32 | read-only | The index in docsIfQosProfileTable describing the quality of service attributes associated with this particular service. If no associated docsIfQosProfileTable entry exists, this object returns a value of zero. |
| TIM docsIfCmtsServiceCreateTime | 1.3.6.1.2.1.10.127.1.3.4.1.5 | TimeStamp | read-only | The value of sysUpTime when this entry was created. |
| C32 docsIfCmtsServiceInOctets | 1.3.6.1.2.1.10.127.1.3.4.1.6 | Counter32 | read-only | The cumulative number of Packet Data octets received on this Service ID. The count does not include the size of the Cable MAC header |
| C32 docsIfCmtsServiceInPackets | 1.3.6.1.2.1.10.127.1.3.4.1.7 | Counter32 | read-only | The cumulative number of Packet Data packets received on this Service ID. |
| I32 docsIfCmtsServiceNewCmStatusIndex | 1.3.6.1.2.1.10.127.1.3.4.1.8 | Integer32 | read-only | Pointer (via docsIfCmtsCmStatusIndex) to an entry in docsIfCmtsCmStatusTable identifying the Cable Modem using this Service Queue. If multiple Cable Modems are using this Service Queue, the value of this object is zero. |
| docsIfCmtsModulationTable | 1.3.6.1.2.1.10.127.1.3.5 | not-accessible | Describes a modulation profile associated with one or more upstream channels. | |
| docsIfCmtsModulationEntry | 1.3.6.1.2.1.10.127.1.3.5.1 | not-accessible | Describes a modulation profile for an Interval Usage Code for one or more upstream channels. Entries in this table are created by the operator. Initial default entries may be created at system initialization time. No individual objects have to be specified in order to create an entry in this table. Note that some objects do not have DEFVALs, but do have calculated defaults and need not be specified during row creation. There is no restriction on the changing of values in this table while their associated rows are active. | |
| I32 docsIfCmtsModIndex | 1.3.6.1.2.1.10.127.1.3.5.1.1 | Integer32 | not-accessible | An index into the Channel Modulation table representing a group of Interval Usage Codes, all associated with the same channel. |
| INT docsIfCmtsModIntervalUsageCode | 1.3.6.1.2.1.10.127.1.3.5.1.2 | INTEGER | not-accessible | An index into the Channel Modulation table which, when grouped with other Interval Usage Codes, fully instantiate all modulation sets for a given upstream channel. |
| ROW docsIfCmtsModControl | 1.3.6.1.2.1.10.127.1.3.5.1.3 | RowStatus | read-create | Controls and reflects the status of rows in this table. |
| INT docsIfCmtsModType | 1.3.6.1.2.1.10.127.1.3.5.1.4 | INTEGER | read-create | The modulation type used on this channel. Returns other(1) if the modulation type is neither qpsk, qam16, qam8, qam32, qam64 or qam128. Type qam128 is used for SCDMA channels only. See the reference for the modulation profiles implied by different modulation types. |
| I32 docsIfCmtsModPreambleLen | 1.3.6.1.2.1.10.127.1.3.5.1.5 | Integer32 | read-create | The preamble length for this modulation profile in bits. Default value is the minimum needed by the implementation at the CMTS for the given modulation profile. |
| T/F docsIfCmtsModDifferentialEncoding | 1.3.6.1.2.1.10.127.1.3.5.1.6 | TruthValue | read-create | Specifies whether or not differential encoding is used on this channel. |
| I32 docsIfCmtsModFECErrorCorrection | 1.3.6.1.2.1.10.127.1.3.5.1.7 | Integer32 | read-create | The number of correctable errored bytes (t) used in forward error correction code. The value of 0 indicates no correction is employed. The number of check bytes appended will be twice this value. |
| I32 docsIfCmtsModFECCodewordLength | 1.3.6.1.2.1.10.127.1.3.5.1.8 | Integer32 | read-create | The number of data bytes (k) in the forward error correction codeword. This object is not used if docsIfCmtsModFECErrorCorrection is zero. |
| I32 docsIfCmtsModScramblerSeed | 1.3.6.1.2.1.10.127.1.3.5.1.9 | Integer32 | read-create | The 15 bit seed value for the scrambler polynomial. |
| I32 docsIfCmtsModMaxBurstSize | 1.3.6.1.2.1.10.127.1.3.5.1.10 | Integer32 | read-create | The maximum number of mini-slots that can be transmitted during this channel's burst time. Returns zero if the burst length is bounded by the allocation MAP rather than this profile. Default value is 0 except for shortData, where it is 8. |
| U32 docsIfCmtsModGuardTimeSize | 1.3.6.1.2.1.10.127.1.3.5.1.11 | Unsigned32 | read-only | The number of symbol-times which must follow the end of this channel's burst. Default value is the minimum time needed by the implementation for this modulation profile. |
| T/F docsIfCmtsModLastCodewordShortened | 1.3.6.1.2.1.10.127.1.3.5.1.12 | TruthValue | read-create | Indicates if the last FEC codeword is truncated. |
| T/F docsIfCmtsModScrambler | 1.3.6.1.2.1.10.127.1.3.5.1.13 | TruthValue | read-create | Indicates if the scrambler is employed. |
| U32 docsIfCmtsModByteInterleaverDepth | 1.3.6.1.2.1.10.127.1.3.5.1.14 | Unsigned32 | read-create | ATDMA Byte Interleaver Depth (Ir). This object returns 1 for non ATDMA profiles. |
| U32 docsIfCmtsModByteInterleaverBlockSize | 1.3.6.1.2.1.10.127.1.3.5.1.15 | Unsigned32 | read-create | ATDMA Byte Interleaver Block size (Br). This object returns zero for non ATDMA profiles |
| INT docsIfCmtsModPreambleType | 1.3.6.1.2.1.10.127.1.3.5.1.16 | INTEGER | read-create | Preamble type for DOCSIS 2.0 bursts |
| T/F docsIfCmtsModTcmErrorCorrectionOn | 1.3.6.1.2.1.10.127.1.3.5.1.17 | TruthValue | read-create | Trellis Code Modulation (TCM) On/Off. This value returns false for non S-CDMA profiles. |
| U32 docsIfCmtsModScdmaInterleaverStepSize | 1.3.6.1.2.1.10.127.1.3.5.1.18 | Unsigned32 | read-create | S-CDMA Interleaver step size. This value returns zero for non S-CDMA profiles. |
| T/F docsIfCmtsModScdmaSpreaderEnable | 1.3.6.1.2.1.10.127.1.3.5.1.19 | TruthValue | read-create | S-CDMA spreader. This value returns false for non S-CDMA profiles. Default value for IUC 3 and 4 is OFF, for all other IUCs it is ON. |
| U32 docsIfCmtsModScdmaSubframeCodes | 1.3.6.1.2.1.10.127.1.3.5.1.20 | Unsigned32 | read-create | S-CDMA sub-frame size. This value returns zero for non S-CDMA profiles. |
| DOC docsIfCmtsModChannelType | 1.3.6.1.2.1.10.127.1.3.5.1.21 | DocsisUpstreamType | read-create | Describes the modulation channel type for this modulation entry. |
| BIT docsIfCmtsQosProfilePermissions | 1.3.6.1.2.1.10.127.1.3.6 | Bits | read-write | This object specifies permitted methods of creating entries in docsIfQosProfileTable. CreateByManagement(0) is set if entries can be created using SNMP. UpdateByManagement(1) is set if updating entries using SNMP is permitted. CreateByModems(2) is set if entries can be created based on information in REG-REQ MAC messages received from Cable Modems. Information in this object is only applicable if docsIfQosProfileTable is implemented as read-create. Otherwise, this object is implemented as read-only and returns CreateByModems(2). Either CreateByManagement(0) or CreateByModems(1) must be set when writing to this object. Note that BITS objects are encoded most significant bit first. For example, if bit 2 is set, the value of this object is the octet string '20'H. |
| docsIfCmtsMacToCmTable | 1.3.6.1.2.1.10.127.1.3.7 | not-accessible | This is a table to provide a quick access index into the docsIfCmtsCmStatusTable. There is exactly one row in this table for each row in the docsIfCmtsCmStatusTable. In general, the management station should use this table only to get a pointer into the docsIfCmtsCmStatusTable (which corresponds to the CM's RF interface MAC address), and should not iterate (e.g. GetNext through) this table. | |
| docsIfCmtsMacToCmEntry | 1.3.6.1.2.1.10.127.1.3.7.1 | not-accessible | A row in the docsIfCmtsMacToCmTable. An entry in this table exists for each Cable Modem that is connected to the CMTS implementing this table. | |
| MAC docsIfCmtsCmMac | 1.3.6.1.2.1.10.127.1.3.7.1.1 | MacAddress | not-accessible | The RF side MAC address for the referenced CM. (E.g. the interface on the CM that has docsCableMacLayer(127) as its ifType. |
| I32 docsIfCmtsCmPtr | 1.3.6.1.2.1.10.127.1.3.7.1.2 | Integer32 | read-only | An row index into docsIfCmtsCmStatusTable. When queried with the correct instance value (e.g. a CM's MAC address), returns the index in docsIfCmtsCmStatusTable which represents that CM. |
| I32 docsIfCmtsChannelUtilizationInterval | 1.3.6.1.2.1.10.127.1.3.8 | Integer32 | read-write | The time interval in seconds over which the channel utilization index is calculated. All upstream/downstream channels use the same docsIfCmtsChannelUtilizationInterval. Setting a value of zero disables utilization reporting. A channel utilization index is calculated over a fixed window applying to the most recent docsIfCmtsChannelUtilizationInterval. It would therefore be prudent to use a relatively short docsIfCmtsChannelUtilizationInterval. |
| docsIfCmtsChannelUtilizationTable | 1.3.6.1.2.1.10.127.1.3.9 | not-accessible | Reports utilization statistics for attached upstream and downstream physical channels. | |
| docsIfCmtsChannelUtilizationEntry | 1.3.6.1.2.1.10.127.1.3.9.1 | not-accessible | Utilization statistics for a single upstream or downstream physical channel. An entry exists in this table for each ifEntry with an ifType equal to docsCableDownstreamInterface (128) or docsCableUpstreamInterface (129). | |
| IAN docsIfCmtsChannelUtIfType | 1.3.6.1.2.1.10.127.1.3.9.1.1 | IANAifType | not-accessible | The secondary index into this table. Indicates the IANA interface type associated with this physical channel. Only docsCableDownstreamInterface (128) and docsCableUpstreamInterface (129) are valid. |
| I32 docsIfCmtsChannelUtId | 1.3.6.1.2.1.10.127.1.3.9.1.2 | Integer32 | not-accessible | The tertiary index into this table. Indicates the CMTS identifier for this physical channel. |
| I32 docsIfCmtsChannelUtUtilization | 1.3.6.1.2.1.10.127.1.3.9.1.3 | Integer32 | read-only | The calculated and truncated utilization index for this physical upstream or downstream channel, accurate as of the most recent docsIfCmtsChannelUtilizationInterval. Upstream Channel Utilization Index: The upstream channel utilization index is expressed as a percentage of minislots utilized on the physical channel, regardless of burst type. For an Initial Maintenance region, the minislots for the complete region are considered utilized if the CMTS received an upstream burst within the region from any CM on the physical channel. For contention REQ and REQ/DATA regions, the minislots for a transmission opportunity within the region are considered utilized if the CMTS received an upstream burst within the opportunity from any CM on the physical channel. For all other regions, utilized minislots are those in which the CMTS granted bandwidth to any unicast SID on the physical channel. For an upstream interface that has multiple logical upstream channels enabled, the utilization index is a weighted sum of utilization indices for the logical channels. The weight for each utilization index is the percentage of upstream minislots allocated for the corresponding logical channel. Example: If 75% of bandwidth is allocated to the first logical channel and 25% to the second, and the utilization indices for each are 60 and 40 respectively, the utilization index for the upstream physical channel is (60 * 0.75) + (40 * 0.25) = 55. This figure applies to the most recent utilization interval. Downstream Channel Utilization Index: The downstream channel utilization index is a percentage expressing the ratio between bytes used to transmit data versus the total number of bytes transmitted in the raw bandwidth of the MPEG channel. As with the upstream utilization index, the calculated value represents the most recent utilization interval. Formula: Downstream utilization index = (100 * (data bytes / raw bytes)) = (100 * ((raw bytes - stuffed bytes) / raw bytes)) Definitions: Data bytes: Number of bytes transmitted as data in the docsIfCmtsChannelUtilizationInterval. Identical to docsIfCmtsDownChannelCtrUsed Bytes measured over the utilization interval. Stuffed bytes: Number of filler bytes transmitted as non-data in the DocsIfCmtsChannelUtilizationInterval. Raw bandwidth: Total number of bytes available for transmitting data, not including bytes used for headers and other overhead. Raw bytes: (raw bandwidth * docsIfCmtsChannelUtilizationInterval). Identical to docsIfCmtsDownChannelCtrTotal Bytes measured over the utilization interval. |
| docsIfCmtsDownChannelCounterTable | 1.3.6.1.2.1.10.127.1.3.10 | not-accessible | This table is implemented at the CMTS to collect downstream channel statistics for utilization calculations. | |
| docsIfCmtsDownChannelCounterEntry | 1.3.6.1.2.1.10.127.1.3.10.1 | not-accessible | An entry provides a list of traffic counters for a single downstream channel. An entry in this table exists for each ifEntry with an ifType of docsCableDownstream(128). | |
| I32 docsIfCmtsDownChnlCtrId | 1.3.6.1.2.1.10.127.1.3.10.1.1 | Integer32 | read-only | The Cable Modem Termination System (CMTS) identification of the downstream channel within this particular MAC interface. If the interface is down, the object returns the most current value. If the downstream channel ID is unknown, this object returns a value of 0. |
| C32 docsIfCmtsDownChnlCtrTotalBytes | 1.3.6.1.2.1.10.127.1.3.10.1.2 | Counter32 | read-only | At the CMTS, the total number of bytes in the Payload portion of MPEG Packets (ie. not including MPEG header or pointer_field) transported by this downstream channel since CMTS initialization. This is the 32 bit version of docsIfCmtsDownChnlCtrExtTotalBytes, included to provide back compatibility with SNMPv1 managers. |
| C32 docsIfCmtsDownChnlCtrUsedBytes | 1.3.6.1.2.1.10.127.1.3.10.1.3 | Counter32 | read-only | At the CMTS, the total number of DOCSIS data bytes transported by this downstream channel since CMTS initialization. The number of data bytes is defined as the total number of bytes transported in DOCSIS payloads minus the number of stuff bytes transported in DOCSIS payloads. This is the 32 bit version of docsIfCmtsDownChnlCtrExtUsedBytes, included to provide back compatibility with SNMPv1 managers. |
| C64 docsIfCmtsDownChnlCtrExtTotalBytes | 1.3.6.1.2.1.10.127.1.3.10.1.4 | Counter64 | read-only | At the CMTS, the total number of bytes in the Payload portion of MPEG Packets (ie. not including MPEG header or pointer_field) transported by this downstream channel since CMTS initialization. This is the 64 bit version of docsIfCmtsDownChnlCtrTotalBytes, and will not be accessible to SNMPv1 managers. |
| C64 docsIfCmtsDownChnlCtrExtUsedBytes | 1.3.6.1.2.1.10.127.1.3.10.1.5 | Counter64 | read-only | At the CMTS, the total number of DOCSIS data bytes transported by this downstream channel since CMTS initialization. The number of data bytes is defined as the total number of bytes transported in DOCSIS payloads minus the number of stuff bytes transported in DOCSIS payloads. This is the 64 bit version of docsIfCmtsDownChnlCtrUsedBytes, and will not be accessible to SNMPv1 managers. |
| docsIfCmtsUpChannelCounterTable | 1.3.6.1.2.1.10.127.1.3.11 | not-accessible | This table is implemented at the CMTS to provide upstream channel statistics appropriate for channel utilization calculations. | |
| docsIfCmtsUpChannelCounterEntry | 1.3.6.1.2.1.10.127.1.3.11.1 | not-accessible | List of traffic statistics for a single upstream channel. For Docsis 2.0 CMTSs, an entry in this table exists for each ifEntry with an ifType of docsCableUpstreamChannel (205). For Docsis 1.x CMTSs, an entry in this table exists for each ifEntry with an ifType of docsCableUpstreamInterface (129). | |
| I32 docsIfCmtsUpChnlCtrId | 1.3.6.1.2.1.10.127.1.3.11.1.1 | Integer32 | read-only | The CMTS identification of the upstream channel. |
| C32 docsIfCmtsUpChnlCtrTotalMslots | 1.3.6.1.2.1.10.127.1.3.11.1.2 | Counter32 | read-only | Current count, from CMTS initialization, of all minislots defined for this upstream logical channel. This count includes all IUCs and SIDs, even those allocated to the NULL SID for a 2.0 logical channel which is inactive. This is the 32 bit version of docsIfCmtsUpChnlCtrExtTotalMslots and is included for back compatibility with SNMPv1 managers. Support for this object is mandatory. |
| C32 docsIfCmtsUpChnlCtrUcastGrantedMslots | 1.3.6.1.2.1.10.127.1.3.11.1.3 | Counter32 | read-only | Current count, from CMTS initialization, of unicast granted minislots on the upstream logical channel, regardless of burst type. Unicast granted minislots are those in which the CMTS assigned bandwidth to any unicast SID on the logical channel. This is the 32 bit version of docsIfCmtsUpChnlCtrExtUcastGrantedMslots, and is included for back compatibility with SNMPv1 managers. Support for this object is mandatory. |
| C32 docsIfCmtsUpChnlCtrTotalCntnMslots | 1.3.6.1.2.1.10.127.1.3.11.1.4 | Counter32 | read-only | Current count, from CMTS initialization, of contention minislots defined for this upstream logical channel. This count includes all minislots assigned to a broadcast or multicast SID on the logical channel. This is the 32 bit version of docsIfCmtsUpChnlCtrExtTotalCntnMslots, and is included for back compatibility with SNMPv1 managers. Support for this object is mandatory. |
| C32 docsIfCmtsUpChnlCtrUsedCntnMslots | 1.3.6.1.2.1.10.127.1.3.11.1.5 | Counter32 | read-only | Current count, from CMTS initialization, of contention minislots utilized on the upstream logical channel. For contention regions, utilized minislots are those in which the CMTS correctly received an upstream burst from any CM on the upstream logical channel. This is the 32 bit version of docsIfCmtsUpChnlCtrExtUsedCntnMslots, and is included for back compatibility with SNMPv1 managers. Support for this object is mandatory. |
| C64 docsIfCmtsUpChnlCtrExtTotalMslots | 1.3.6.1.2.1.10.127.1.3.11.1.6 | Counter64 | read-only | Current count, from CMTS initialization, of all minislots defined for this upstream logical channel. This count includes all IUCs and SIDs, even those allocated to the NULL SID for a 2.0 logical channel which is inactive. This is the 64 bit version of docsIfCmtsUpChnlCtrTotalMslots, and will not be accessible to SNMPv1 managers. Support for this object is mandatory. |
| C64 docsIfCmtsUpChnlCtrExtUcastGrantedMslots | 1.3.6.1.2.1.10.127.1.3.11.1.7 | Counter64 | read-only | Current count, from CMTS initialization, of unicast granted minislots on the upstream logical channel, regardless of burst type. Unicast granted minislots are those in which the CMTS assigned bandwidth to any unicast SID on the logical channel. This is the 64 bit version of docsIfCmtsUpChnlCtrUcastGrantedMslots, and will not be accessible to SNMPv1 managers. Support for this object is mandatory. |
| C64 docsIfCmtsUpChnlCtrExtTotalCntnMslots | 1.3.6.1.2.1.10.127.1.3.11.1.8 | Counter64 | read-only | Current count, from CMTS initialization, of contention minislots defined for this upstream logical channel. This count includes all minislots assigned to a broadcast or multicast SID on the logical channel. This is the 64 bit version of docsIfCmtsUpChnlCtrTotalCntnMslots, and will not be accessible to SNMPv1 managers. Support for this object is mandatory. |
| C64 docsIfCmtsUpChnlCtrExtUsedCntnMslots | 1.3.6.1.2.1.10.127.1.3.11.1.9 | Counter64 | read-only | Current count, from CMTS initialization, of contention minislots utilized on the upstream logical channel. For contention regions, utilized minislots are those in which the CMTS correctly received an upstream burst from any CM on the upstream logical channel. This is the 64 bit version of docsIfCmtsUpChnlCtrUsedCntnMslots, and will not be accessible to SNMPv1 managers. Support for this object is mandatory. |
| C32 docsIfCmtsUpChnlCtrCollCntnMslots | 1.3.6.1.2.1.10.127.1.3.11.1.10 | Counter32 | read-only | Current count, from CMTS initialization, of contention minislots subjected to collisions on the upstream logical channel. For contention regions, these are the minislots applicable to bursts that the CMTS detected, but could not correctly receive. This is the 32 bit version of docsIfCmtsUpChnlCtrExtCollCntnMslots, and is included for back compatibility with SNMPv1 managers. Support for this object is optional. If the object is not supported, a value of zero is returned. |
| C32 docsIfCmtsUpChnlCtrTotalCntnReqMslots | 1.3.6.1.2.1.10.127.1.3.11.1.11 | Counter32 | read-only | Current count, from CMTS initialization, of contention request minislots defined for this upstream logical channel. This count includes all minislots for IUC1 assigned to a broadcast or multicast SID on the logical channel. This is the 32 bit version of docsIfCmtsUpChnlCtrExtTotalCntnReqMslots, and is included for back compatibility with SNMPv1 managers. Support for this object is optional. If the object is not supported, a value of zero is returned. |
| C32 docsIfCmtsUpChnlCtrUsedCntnReqMslots | 1.3.6.1.2.1.10.127.1.3.11.1.12 | Counter32 | read-only | Current count, from CMTS initialization, of contention request minislots utilized on this upstream logical channel. This count includes all contention minislots for IUC1 applicable to bursts that the CMTS correctly received. This is the 32 bit version of docsIfCmtsUpChnlCtrExtUsedCntnReqMslots, and is included for back compatibility with SNMPv1 managers. Support for this object is optional. If the object is not supported, a value of zero is returned. |
| C32 docsIfCmtsUpChnlCtrCollCntnReqMslots | 1.3.6.1.2.1.10.127.1.3.11.1.13 | Counter32 | read-only | Current count, from CMTS initialization, of contention request minislots subjected to collisions on this upstream logical channel. This includes all contention minislots for IUC1 applicable to bursts that the CMTS detected, but could not correctly receive. This is the 32 bit version of docsIfCmtsUpChnlCtrExtCollCntnReqMslots, and is included for back compatibility with SNMPv1 managers. Support for this object is optional. If the object is not supported, a value of zero is returned. |
| C32 docsIfCmtsUpChnlCtrTotalCntnReqDataMslots | 1.3.6.1.2.1.10.127.1.3.11.1.14 | Counter32 | read-only | Current count, from CMTS initialization, of contention request data minislots defined for this upstream logical channel. This count includes all minislots for IUC2 assigned to a broadcast or multicast SID on the logical channel. This is the 32 bit version of docsIfCmtsUpChnlCtrExtTotalCntnReqDataMslots, and is included for back compatibility with SNMPv1 managers. Support for this object is optional. If the object is not supported, a value of zero is returned. |
| C32 docsIfCmtsUpChnlCtrUsedCntnReqDataMslots | 1.3.6.1.2.1.10.127.1.3.11.1.15 | Counter32 | read-only | Current count, from CMTS initialization, of contention request data minislots utilized on this upstream logical channel. This includes all contention minislots for IUC2 applicable to bursts that the CMTS correctly received. This is the 32 bit version of docsIfCmtsUpChnlCtrExtUsedCntnReqDataMslots, and is included for back compatibility with SNMPv1 managers. Support for this object is optional. If the object is not supported, a value of zero is returned. |
| C32 docsIfCmtsUpChnlCtrCollCntnReqDataMslots | 1.3.6.1.2.1.10.127.1.3.11.1.16 | Counter32 | read-only | Current count, from CMTS initialization, of contention request data minislots subjected to collisions on this upstream logical channel. This includes all contention minislots for IUC2 applicable to bursts that the CMTS detected, but could not correctly receive. This is the 32 bit version of docsIfCmtsUpChnlCtrExtCollCntnReqDataMslots, and is included for back compatibility with SNMPv1 managers. Support for this object is optional. If the object is not supported, a value of zero is returned. |
| C32 docsIfCmtsUpChnlCtrTotalCntnInitMaintMslots | 1.3.6.1.2.1.10.127.1.3.11.1.17 | Counter32 | read-only | Current count, from CMTS initialization, of contention initial maintenance minislots defined for this upstream logical channel. This includes all minislots for IUC3 assigned to a broadcast or multicast SID on the logical channel. This is the 32 bit version of docsIfCmtsUpChnlCtrExtTotalCntnInitMaintMslots, and is included for back compatibility with SNMPv1 managers. Support for this object is optional. If the object is not supported, a value of zero is returned. |
| C32 docsIfCmtsUpChnlCtrUsedCntnInitMaintMslots | 1.3.6.1.2.1.10.127.1.3.11.1.18 | Counter32 | read-only | Current count, from CMTS initialization, of contention initial maintenance minislots utilized on this upstream logical channel. This includes all contention minislots for IUC3 applicable to bursts that the CMTS correctly received. This is the 32 bit version of docsIfCmtsUpChnlCtrExtUsedCntnInitMaintMslots, and is included for back compatibility with SNMPv1 managers. Support for this object is optional. If the object is not supported, a value of zero is returned. |
| C32 docsIfCmtsUpChnlCtrCollCntnInitMaintMslots | 1.3.6.1.2.1.10.127.1.3.11.1.19 | Counter32 | read-only | Current count, from CMTS initialization, of contention initial maintenance minislots subjected to collisions on this upstream logical channel. This includes all contention minislots for IUC3 applicable to bursts that the CMTS detected, but could not correctly receive. This is the 32 bit version of docsIfCmtsUpChnlCtrExtCollCntnInitMaintMslots, and is included for back compatibility with SNMPv1 managers. Support for this object is optional. If the object is not supported, a value of zero is returned. |
| C64 docsIfCmtsUpChnlCtrExtCollCntnMslots | 1.3.6.1.2.1.10.127.1.3.11.1.20 | Counter64 | read-only | Current count, from CMTS initialization, of collision contention minislots on the upstream logical channel. For contention regions, these are the minislots applicable to bursts that the CMTS detected, but could not correctly receive. This is the 64 bit version of docsIfCmtsUpChnlCtrCollCntnMslots, and will not be accessible to SNMPv1 managers. Support for this object is optional. If the object is not supported, a value of zero is returned. |
| C64 docsIfCmtsUpChnlCtrExtTotalCntnReqMslots | 1.3.6.1.2.1.10.127.1.3.11.1.21 | Counter64 | read-only | Current count, from CMTS initialization, of contention request minislots defined for this upstream logical channel. This count includes all minislots for IUC1 assigned to a broadcast or multicast SID on the logical channel. This is the 64 bit version of docsIfCmtsUpChnlCtrTotalCntnReqMslots, and will not be accessible to SNMPv1 managers. Support for this object is optional. If the object is not supported, a value of zero is returned. |
| C64 docsIfCmtsUpChnlCtrExtUsedCntnReqMslots | 1.3.6.1.2.1.10.127.1.3.11.1.22 | Counter64 | read-only | Current count, from CMTS initialization, of contention request minislots utilized on this upstream logical channel. This count includes all contention minislots for IUC1 applicable to bursts that the CMTS correctly received. This is the 64 bit version of docsIfCmtsUpChnlCtrUsedCntnReqMslots, and will not be accessible to SNMPv1 managers. Support for this object is optional. If the object is not supported, a value of zero is returned. |
| C64 docsIfCmtsUpChnlCtrExtCollCntnReqMslots | 1.3.6.1.2.1.10.127.1.3.11.1.23 | Counter64 | read-only | Current count, from CMTS initialization, of contention request minislots subjected to collisions on this upstream logical channel. This includes all contention minislots for IUC1 applicable to bursts that the CMTS detected, but could not correctly receive. This is the 64 bit version of docsIfCmtsUpChnlCtrCollCntnReqMslots, and will not be accessible to SNMPv1 managers. Support for this object is optional. If the object is not supported, a value of zero is returned. |
| C64 docsIfCmtsUpChnlCtrExtTotalCntnReqDataMslots | 1.3.6.1.2.1.10.127.1.3.11.1.24 | Counter64 | read-only | Current count, from CMTS initialization, of contention request data minislots defined for this upstream logical channel. This count includes all minislots for IUC2 assigned to a broadcast or multicast SID on the logical channel. This is the 64 bit version of docsIfCmtsUpChnlCtrTotalCntnReqDataMslots, and will not be accessible to SNMPv1 managers. Support for this object is optional. If the object is not supported, a value of zero is returned. |
| C64 docsIfCmtsUpChnlCtrExtUsedCntnReqDataMslots | 1.3.6.1.2.1.10.127.1.3.11.1.25 | Counter64 | read-only | Current count, from CMTS initialization, of contention request data minislots utilized on this upstream logical channel. This includes all contention minislots for IUC2 applicable to bursts that the CMTS correctly received. This is the 64 bit version of docsIfCmtsUpChnlCtrUsedCntnReqDataMslots, and will not be accessible to SNMPv1 managers. Support for this object is optional. If the object is not supported, a value of zero is returned. |
| C64 docsIfCmtsUpChnlCtrExtCollCntnReqDataMslots | 1.3.6.1.2.1.10.127.1.3.11.1.26 | Counter64 | read-only | Current count, from CMTS initialization, of contention request data minislots subjected to collisions on this upstream logical channel. This includes all contention minislots for IUC2 applicable to bursts that the CMTS detected, but could not correctly receive. This is the 64 bit version of docsIfCmtsUpChnlCtrCollCntnReqDataMslots, and will not be accessible to SNMPv1 managers. Support for this object is optional. If the object is not supported, a value of zero is returned. |
| C64 docsIfCmtsUpChnlCtrExtTotalCntnInitMaintMslots | 1.3.6.1.2.1.10.127.1.3.11.1.27 | Counter64 | read-only | Current count, from CMTS initialization, of initial maintenance minislots defined for this upstream logical channel. This count includes all minislots for IUC3 assigned to a broadcast or multicast SID on the logical channel. This is the 64 bit version of docsIfCmtsUpChnlCtrTotalCntnInitMaintMslots, and will not be accessible to SNMPv1 managers. Support for this object is optional. If the object is not supported, a value of zero is returned. |
| C64 docsIfCmtsUpChnlCtrExtUsedCntnInitMaintMslots | 1.3.6.1.2.1.10.127.1.3.11.1.28 | Counter64 | read-only | Current count, from CMTS initialization, of initial maintenance minislots utilized on this upstream logical channel. This includes all contention minislots for IUC3 applicable to bursts that the CMTS correctly received. This is the 64 bit version of docsIfCmtsUpChnlCtrUsedCntnInitMaintMslots, and will not be accessible to SNMPv1 managers. Support for this object is optional. If the object is not supported, a value of zero is returned. |
| C64 docsIfCmtsUpChnlCtrExtCollCntnInitMaintMslots | 1.3.6.1.2.1.10.127.1.3.11.1.29 | Counter64 | read-only | Current count, from CMTS initialization, of contention initial maintenance minislots subjected to collisions on this upstream logical channel. This includes all contention minislots for IUC3 applicable to bursts that the CMTS detected, but could not correctly receive. This is the 64 bit version of docsIfCmtsUpChnlCtrCollCntnInitMaintMslots, and will not be accessible to SNMPv1 managers. Support for this object is optional. If the object is not supported, a value of zero is returned. |
| docsIfNotification | 1.3.6.1.2.1.10.127.2 | |||
| docsIfConformance | 1.3.6.1.2.1.10.127.3 | |||
| docsIfCompliances | 1.3.6.1.2.1.10.127.3.1 | |||
| docsIfBasicCompliance | 1.3.6.1.2.1.10.127.3.1.1 | The compliance statement for devices that implement MCNS/DOCSIS compliant Radio Frequency Interfaces. | ||
| docsIfGroups | 1.3.6.1.2.1.10.127.3.2 | |||
| docsIfBasicGroup | 1.3.6.1.2.1.10.127.3.2.1 | Group of objects implemented in both Cable Modems and Cable Modem Termination Systems. | ||
| docsIfCmGroup | 1.3.6.1.2.1.10.127.3.2.2 | Group of objects implemented in Cable Modems. | ||
| docsIfCmtsGroup | 1.3.6.1.2.1.10.127.3.2.3 | Group of objects implemented in Cable Modem Termination Systems. | ||
| docsIfCompliancesV2 | 1.3.6.1.2.1.10.127.3.3 | |||
| docsIfBasicComplianceV2 | 1.3.6.1.2.1.10.127.3.3.1 | The compliance statement for devices that implement MCNS/DOCSIS compliant Radio Frequency Interfaces. | ||
| docsIfGroupsV2 | 1.3.6.1.2.1.10.127.3.4 | |||
| docsIfBasicGroupV2 | 1.3.6.1.2.1.10.127.3.4.1 | Group of objects implemented in both Cable Modems and Cable Modem Termination Systems. | ||
| docsIfCmGroupV2 | 1.3.6.1.2.1.10.127.3.4.2 | Group of objects implemented in Cable Modems. | ||
| docsIfCmtsGroupV2 | 1.3.6.1.2.1.10.127.3.4.3 | Group of objects implemented in Cable Modem Termination Systems. |
RFC description
Management Information Base for DOCSIS 2.0 Radio Frequency Interface management (RFC 4546). Defines managed objects for fault management of PHY and MAC layers including signal-to-noise ratios, power levels, and collision tracking on cable modem systems.
Start monitoring DOCSIS 2.0 cable modem/CMTS (RF interface, vendor-neutral IETF/CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.