All MIBs › DOCS-IETF-RFI-MIB › docsIfCmtsCmStatusSignalNoise
docsIfCmtsCmStatusSignalNoise
Module: DOCS-IETF-RFI-MIB
OID (symbolic): DOCS-IETF-RFI-MIB::docsIfCmtsCmStatusSignalNoise
OID (numeric): 1.3.6.1.2.1.10.127.1.3.3.1.13
Node type: OBJECT-TYPE
Type: TenthdB
Access: read-only
Description: Signal/Noise ratio as perceived for upstream data from this Cable Modem. If the Signal/Noise is unknown, this object returns a value of zero.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.127.1.3.3.1.13 snmpwalk -v2c -c public <target> DOCS-IETF-RFI-MIB::docsIfCmtsCmStatusSignalNoise
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.127.1.3.3.1.13.1 snmpget -v2c -c public <target> DOCS-IETF-RFI-MIB::docsIfCmtsCmStatusSignalNoise.1
Start monitoring DOCSIS 2.0 cable modem/CMTS (RF interface, vendor-neutral IETF/CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-IETF-RFI-MIB::docsIfCmtsCmStatusSignalNoise OID value, configure state conditions and alerts, and monitor any DOCSIS 2.0 cable modem/CMTS (RF interface, vendor-neutral IETF/CableLabs standard) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.127 | docsIfMib | DOCS-IETF-RFI-MIB |
| 1.3.6.1.2.1.10.127.1 | docsIfMibObjects | DOCS-IETF-RFI-MIB |
| 1.3.6.1.2.1.10.127.1.3 | docsIfCmtsObjects | DOCS-IETF-RFI-MIB |
| 1.3.6.1.2.1.10.127.1.3.3 | docsIfCmtsCmStatusTable | DOCS-IETF-RFI-MIB |
| 1.3.6.1.2.1.10.127.1.3.3.1 | docsIfCmtsCmStatusEntry | DOCS-IETF-RFI-MIB |
| 1.3.6.1.2.1.10.127.1.3.3.1.13 | docsIfCmtsCmStatusSignalNoise | DOCS-IETF-RFI-MIB |