DOCS-IETF-RFI-MIB :: docsIfCmtsCmStatusValue

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsDOCS-IETF-RFI-MIBdocsIfCmtsCmStatusValue

docsIfCmtsCmStatusValue

Module: DOCS-IETF-RFI-MIB

OID (symbolic): DOCS-IETF-RFI-MIB::docsIfCmtsCmStatusValue

OID (numeric): 1.3.6.1.2.1.10.127.1.3.3.1.9

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Current Cable Modem connectivity state, as specified in the RF Interface Specification. Returned status information is the CM status as assumed by the CMTS, and indicates the following events: other(1) Any state other than below. ranging(2) The CMTS has received an Initial Ranging Request message from the CM, and the ranging process is not yet complete. rangingAborted(3) The CMTS has sent a Ranging Abort message to the CM. rangingComplete(4) The CMTS has sent a Ranging Complete message to the CM. ipComplete(5) The CMTS has received a DHCP reply message and forwarded it to the CM. registrationComplete(6) The CMTS has sent a Registration Response message to the CM. accessDenied(7) The CMTS has sent a Registration Aborted message to the CM. operational(8) If Baseline Privacy is enabled for the CM, the CMTS has completed Baseline Privacy initialization. If Baseline Privacy is not enabled, equivalent to registrationComplete. The CMTS only needs to report states it is able to detect.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.127.1.3.3.1.9
snmpwalk -v2c -c public <target> DOCS-IETF-RFI-MIB::docsIfCmtsCmStatusValue

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.127.1.3.3.1.9.1
snmpget -v2c -c public <target> DOCS-IETF-RFI-MIB::docsIfCmtsCmStatusValue.1

Start monitoring DOCSIS 2.0 cable modem/CMTS (RF interface, vendor-neutral IETF/CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-IETF-RFI-MIB::docsIfCmtsCmStatusValue OID value, configure state conditions and alerts, and monitor any DOCSIS 2.0 cable modem/CMTS (RF interface, vendor-neutral IETF/CableLabs standard) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
Numeric OIDNameModule
1.3.6.1.2.1.10.127docsIfMibDOCS-IETF-RFI-MIB
1.3.6.1.2.1.10.127.1docsIfMibObjectsDOCS-IETF-RFI-MIB
1.3.6.1.2.1.10.127.1.3docsIfCmtsObjectsDOCS-IETF-RFI-MIB
1.3.6.1.2.1.10.127.1.3.3docsIfCmtsCmStatusTableDOCS-IETF-RFI-MIB
1.3.6.1.2.1.10.127.1.3.3.1docsIfCmtsCmStatusEntryDOCS-IETF-RFI-MIB
1.3.6.1.2.1.10.127.1.3.3.1.9docsIfCmtsCmStatusValueDOCS-IETF-RFI-MIB