DACS-MIB

OID symbolic	OID numeric	Type	Access	Description
INT agnAlarmsCmprAlarmIdx	1.3.6.1.4.1.164.3.1.2.3.3.1.2	INTEGER	read-only	A unique number to identify an entry in the alarm status table of the agent.
agnAlarmsCmprEntry	1.3.6.1.4.1.164.3.1.2.3.3.1		not-accessible
OCT agnAlarmsCmprObj	1.3.6.1.4.1.164.3.1.2.3.3.1.3	OCTET STRING	read-only	This attribute is the compressed information itself.
agnAlarmsCmprTable	1.3.6.1.4.1.164.3.1.2.3.3		not-accessible
INT agnAlarmsCmprVersion	1.3.6.1.4.1.164.3.1.2.3.3.1.1	INTEGER	read-only	This attribute indicates the version of the internal format of the Compressed data
INT agnAlrBufCmprAlarmIdx	1.3.6.1.4.1.164.3.1.2.3.4.1.2	INTEGER	read-only	A unique number to identify an entry in the history alarms buffer of the agent.
agnAlrBufCmprEntry	1.3.6.1.4.1.164.3.1.2.3.4.1		not-accessible
OCT agnAlrBufCmprObj	1.3.6.1.4.1.164.3.1.2.3.4.1.3	OCTET STRING	read-only	This attribute is the compressed information itself.
agnAlrBufCmprTable	1.3.6.1.4.1.164.3.1.2.3.4		not-accessible
INT agnAlrBufCmprVersion	1.3.6.1.4.1.164.3.1.2.3.4.1.1	INTEGER	read-only	This attribute indicates the version of the internal format of the Compressed data
INT agnCAgendaCnfgIdx	1.3.6.1.4.1.164.3.1.2.5.1.1.1	INTEGER	read-only	Active or Temporary Agenda Table. Both configurations can be read but only the Temporary can be written to.
INT agnCAgendaDayCategory	1.3.6.1.4.1.164.3.1.2.5.1.1.3	INTEGER	read-write	The Category of the Day
INT agnCAgendaDayIdx	1.3.6.1.4.1.164.3.1.2.5.1.1.2	INTEGER	read-only	Day of week
agnCAgendaEntry	1.3.6.1.4.1.164.3.1.2.5.1.1		not-accessible
agnCAgendaTable	1.3.6.1.4.1.164.3.1.2.5.1		not-accessible	This table devides the week days into categories needed for DB flip consideration.
INT agnCClkCnfgIdx	1.3.6.1.4.1.164.3.1.2.2.4.1.1	INTEGER	read-only	This attribute indicates the Idx of the Cnfg(1..100) being accessed and Idx 255 relates to the TmpCnfg.
agnCClkSrcEntry	1.3.6.1.4.1.164.3.1.2.2.4.1		not-accessible
INT agnCClkSrcIdx	1.3.6.1.4.1.164.3.1.2.2.4.1.2	INTEGER	read-only	An index to the table. There are only two entries to this table. Index 1 points to the Master clock parameters and Index 2 points to the Fallback clock parameters
INT agnCClkSrcMode	1.3.6.1.4.1.164.3.1.2.2.4.1.3	INTEGER	read-write	The source of the nodal timing.
INT agnCClkSrcPrt	1.3.6.1.4.1.164.3.1.2.2.4.1.5	INTEGER	read-write	This entry is valid only when we are working in rxClk mode. For an invalid entry, the return value will be '7fff'h.
INT agnCClkSrcSlt	1.3.6.1.4.1.164.3.1.2.2.4.1.4	INTEGER	read-write	This entry is valid only when we are working in rxClk mode. For an invalid entry, the return value will be '7fff'h.
agnCClkSrcTable	1.3.6.1.4.1.164.3.1.2.2.4		not-accessible	All the entries of this table are identical (have the same value) for all the configurations (1..100) except the TmpCnfg. The write operation into the Table Objects is valid only for the TmpCnfg entry.
INT agnCDefaultCnfgIdxCmd	1.3.6.1.4.1.164.3.1.2.2.6	INTEGER	read-write	Setting this attribute will define the desired working configuration when no conditions of the Flip DB Table are fulfilled and no Net GO command was issued. This command will be accepted only if the Configuration number exists (agnSEntryIsValid=yes).
INT agnCDeleteCnfgIdxCmd	1.3.6.1.4.1.164.3.1.2.2.5	INTEGER	read-write	Setting this attribute will delete the requested DB from the NVRAM .
INT agnCFlipActive	1.3.6.1.4.1.164.3.1.2.5.3.1.3	INTEGER	read-write	Indicates if the entry is valid. In order to Add/Modify parameters of an entry this object should be Set to Yes. In order to delete an entry, this object should be Set to No.
INT agnCFlipCnfgIdx	1.3.6.1.4.1.164.3.1.2.5.3.1.1	INTEGER	read-only	Active or Temporary Flip Decisions Table. Both configurations can be read but only the Temporary can be written to.
INT agnCFlipDbNo	1.3.6.1.4.1.164.3.1.2.5.3.1.5	INTEGER	read-write	The ID of the required DB
INT agnCFlipDbSanityCheckCmd	1.3.6.1.4.1.164.3.1.2.5.4.1	INTEGER	read-write	Setting this attribute to on(3) will initiate the process of Sanity check on the Temp Flip Db and automatically be changed to off(2).
INT agnCFlipDiscardDe	1.3.6.1.4.1.164.3.1.2.5.3.1.6	INTEGER	read-write	Indicates whether the Mux should start discarding all DE. (MP3000 Only).
agnCFlipEntry	1.3.6.1.4.1.164.3.1.2.5.3.1		not-accessible
INT agnCFlipIdx	1.3.6.1.4.1.164.3.1.2.5.3.1.2	INTEGER	read-only	Entry number within the table
STR agnCFlipLogicalExp	1.3.6.1.4.1.164.3.1.2.5.3.1.4	DisplayString	read-write	A logical expression composed of events numbers (which were configured in the 'AgnCFlipNetEvantsTable') and logical operators ('\|', '&', '!', '(', ')') between them. e.g - (1 & !2) \| (121 & 230)
INT agnCFlipNetEventActive	1.3.6.1.4.1.164.3.1.2.5.2.1.3	INTEGER	read-write	Indicates if the entry is valid. In order to Add/Modify parameters of an entry, this object should be set to Yes. In order to delete an entry, this object should be Set to No.
INT agnCFlipNetEventDayType	1.3.6.1.4.1.164.3.1.2.5.2.1.10	INTEGER	read-write	The time event relates to all days defined in this category in the agnCAgendaTable. Applicable only for time event
STR agnCFlipNetEventEndTime	1.3.6.1.4.1.164.3.1.2.5.2.1.12	DisplayString	read-write	The time event will be deactivated at this time. The format is hh:mm.
INT agnCFlipNetEventIdx	1.3.6.1.4.1.164.3.1.2.5.2.1.2	INTEGER	read-only	Entry within the table
INT agnCFlipNetEventISD	1.3.6.1.4.1.164.3.1.2.5.2.1.8	INTEGER	read-write	The time in seconds since the Net Event was reported as ON until it is considered as ON. Not relevant for time events.
INT agnCFlipNetEventNo	1.3.6.1.4.1.164.3.1.2.5.2.1.5	INTEGER	read-write	The Net Event No. (Bit Index)
INT agnCFlipNetEventOSD	1.3.6.1.4.1.164.3.1.2.5.2.1.9	INTEGER	read-write	The time in seconds since the net event was reported as OFF until it is considered as OFF. Not relevant for time events.
INT agnCFlipNetEventPort	1.3.6.1.4.1.164.3.1.2.5.2.1.7	INTEGER	read-write	The port within the relevant slot
INT agnCFlipNetEventsCnfgIdx	1.3.6.1.4.1.164.3.1.2.5.2.1.1	INTEGER	read-only	Active or Temporary Net Events Table. Both configurations can be read but only the Temporary can be written to.
agnCFlipNetEventsEntry	1.3.6.1.4.1.164.3.1.2.5.2.1		not-accessible
INT agnCFlipNetEventSlot	1.3.6.1.4.1.164.3.1.2.5.2.1.6	INTEGER	read-write	The slot to which the net event relates . Not applicable for time event
agnCFlipNetEventsTable	1.3.6.1.4.1.164.3.1.2.5.2		not-accessible	This table holds the Net Events the MUX should trace
STR agnCFlipNetEventStartTime	1.3.6.1.4.1.164.3.1.2.5.2.1.11	DisplayString	read-write	The time event will be activated at this time. The format is hh:mm.
INT agnCFlipNetEventType	1.3.6.1.4.1.164.3.1.2.5.2.1.4	INTEGER	read-write	The Net Event type
agnCFlipTable	1.3.6.1.4.1.164.3.1.2.5.3		not-accessible	The DB Flip Decisions Table
CTR agnChangeCnt	1.3.6.1.4.1.164.6.2.4	Counter	read-only	The number of changes in system configuration that were reported to the manager since last cold start
INT agnCLoadCnfgIdxCmd	1.3.6.1.4.1.164.3.1.2.2.3	INTEGER	read-write	This attribute specifies the Id of the source Cnfg to be loaded into the TmpCnfg. Upon set operation the actual transfer will be initiated. The operation is valid only on Valid configurations (agnSEntryIsValid)
INT agnCmprCnfgIdx	1.3.6.1.4.1.164.3.1.2.3.1.1.2	INTEGER	read-only	This attribute indicates the configuration to which the Compressed information is related.
agnCmprEntry	1.3.6.1.4.1.164.3.1.2.3.1.1		not-accessible
OCT agnCmprObj	1.3.6.1.4.1.164.3.1.2.3.1.1.4	OCTET STRING	read-write	This attribute is the compressed information itself.
agnCmprTable	1.3.6.1.4.1.164.3.1.2.3.1		not-accessible
INT agnCmprTypIdx	1.3.6.1.4.1.164.3.1.2.3.1.1.1	INTEGER	read-only	This attribute indicates the Type of the Compressed being referred.
INT agnCmprVersion	1.3.6.1.4.1.164.3.1.2.3.1.1.3	INTEGER	read-only	This attribute indicates the version of the internal format of the Compressed data
INT agnCNetDelay	1.3.6.1.4.1.164.3.1.2.5.4.6	INTEGER	read-write	This attribute determines the period of time in seconds that takes for a message to be transferred over all the network. After a 'GO' command the MUX issues a delay of 'agnCNetDelay' before activating the appropriate DB. The delay will be applied only after performing agnCSaveFlipDbCmd.
INT agnCNetEventsBcast	1.3.6.1.4.1.164.3.1.2.5.4.7	INTEGER	read-write	This object determines if the Net Events will be Broadcasted to other Muxes of the Net or not. disabled - Net Events will NOT be Broadcasted enabled - Net Events will be Broadcasted. Default=disabled. The value will be applied only after performing agnCSaveFlipDbCmd.
INT agnCNetEventsBcastInterval	1.3.6.1.4.1.164.3.1.2.5.4.8	INTEGER	read-write	When agnCNetEventsBcast is enabled, this object determines the interval of time in seconds, between two consecutive Net Events transferred over the network. Default=40 sec. The interval will be applied only after performing agnCSaveFlipDbCmd.
INT agnCNetGoCmd	1.3.6.1.4.1.164.3.1.2.5.4.5	INTEGER	read-write	Setting this attribute to On will broadcast a 'GO' command to the network. When a Mux receives a 'GO' command it issues a delay for 'agnCNetDelay' seconds and then activates the DB which was pre-defined by one of the commands : 'agnCSaveNetCnfgIdxCmd' or 'agnCSaveNetFlipDbCmd'.
agnCnfgAlarm	1.3.6.1.4.1.164.3.1.2.2.8
INT agnCnfgAlrCode	1.3.6.1.4.1.164.3.1.2.2.8.2.1.1	INTEGER	read-only	The alarm code. The following attributes refer this code.
agnCnfgAlrEntry	1.3.6.1.4.1.164.3.1.2.2.8.2.1		not-accessible
INT agnCnfgAlrFilter	1.3.6.1.4.1.164.3.1.2.2.8.2.1.6	INTEGER	read-write	An attribute defining if Filter is desired for the alarm . no - no filter. yes - filter activate. This filter is activated within a window of time defined by agnCnfgAlrFilterWindow. Its purpose is to avoid frequent changes of an alarm between ON/OFF states.
INT agnCnfgAlrFilterReset	1.3.6.1.4.1.164.3.1.2.2.8.2.1.8	INTEGER	read-write	This is a bottom threshold causing the alarm that does not pass it, to be declared Reset (ON) at the end of the respective window of time. - For alarms defined by default as state alarms (minor,major) this value will be in [%]. - For alarms defined by default as events, this value will be an integer meaning how many times this event should appear at most, during the window, in order to be considered OFF. This value should be less than the one of agnCnfgAlrFilterSet. Agents that do not support Alarms Filter, will return 0.
INT agnCnfgAlrFilterSet	1.3.6.1.4.1.164.3.1.2.2.8.2.1.7	INTEGER	read-write	This is a top threshold causing the alarm that passes it, to be declared Set (ON) at the end of the respective window of time. - For alarms defined by default as state alarms (minor,major) this value will be in [%]. - For alarms defined by default as events, this value will be an integer meaning how many times this event should appear at least, during the window in order to be considered ON. The maximum valuewill be 255. This value should be greater than the one of agnCnfgAlrFilterReset. Agents that do not support Alarms Filter, will return 0.
INT agnCnfgAlrFilterWindow	1.3.6.1.4.1.164.3.1.2.2.8.1	INTEGER	read-write	Window of time, in minutes. During this Window, the alarms filter is performed. Same Window for all agent alarms that need filtering. Upon end of the Window, the state of the alarm is updated and a new Window starts. If no alarm needs filtering, this object's value will not be used.
INT agnCnfgAlrInvert	1.3.6.1.4.1.164.3.1.2.2.8.2.1.5	INTEGER	read-write	An attribute defining the desired Invert state of an alarm . no - not inverted. yes - inverted. For MP, it is not applicable for alarms that are currently OFF.
INT agnCnfgAlrMask	1.3.6.1.4.1.164.3.1.2.2.8.2.1.4	INTEGER	read-write	An attribute defining the desired Mask state of an alarm . no - unmask (this command is not saved in agent's common database) noAndSave - unmask ; this command is saved in agent's common database yes - mask (this command is not saved in agent's common database) yesAndSave - mask ; this command is saved in agent's common database. Commands that are not saved, will be lost upon power-up or selected card removal.
INT agnCnfgAlrPort	1.3.6.1.4.1.164.3.1.2.2.8.2.1.3	INTEGER	read-only	The alarm port. The following attributes apply for the alarm code,slot and port selected. 200 = all = the attributes apply to all ports of the selected slot. When selected Slot is 'all', only 'all' or 'notApplicable' are valid Port selections. notApplicable = the selected alarm is for system or card level. =255 for MP =100 for DXC - For MP, valid cards' ports are: exPrt1(1)..exPrt12(12) inPrt1(101)..inPrt48 (148) - For DXC, the port index will include the Slot, as for all DXC tables: [(IO Slot+10)&n] ; n=odd for external ports n=even for internal ports.
agnCnfgAlrReportEntry	1.3.6.1.4.1.164.3.1.2.2.8.3.1		not-accessible
agnCnfgAlrReportTable	1.3.6.1.4.1.164.3.1.2.2.8.3		not-accessible	This table enables the user to configure the desired Alarm Reports according to alarms severity.
INT agnCnfgAlrReportType	1.3.6.1.4.1.164.3.1.2.2.8.3.1.1	INTEGER	read-only	The alarm report type. trap - traps will be sent only for alarms having the selected On/Off severity or higher. buffer - only alarms having the selected On/Off severity and higher, will be reported to the buffer. relay - relay contact will be activated only for alarms having the selected On severity or higher. For products having 2 relays, this is the Minor Relay. alrLedOn/alrLedBlink - user should select a higher severity (ReportOn) for alrLedBlink than for alrLedOn (Blinking Led means a more severe alarm than steady ON Led). alrLedOn - MTCL-1 Alarm Led will be ON only when agnSAlrStatusAll equals the selected severity or higher, but lower severity than that selected for 'alrLedBlink'. For products having 2 LEDs, this is the Minor LED. alrLedBlink - MTCL-1 Alarm Led will Blink only when agnSAlrStatusAll equals the selected severity or higher. For products having 2 LEDs, this is the Major LED. relay2 - relay 2 contact will be activated only for alarms having the selected On severity or higher. This is the Major Relay.
INT agnCnfgAlrSlot	1.3.6.1.4.1.164.3.1.2.2.8.2.1.2	INTEGER	read-only	The alarm slot. The following attributes apply for the alarm code and slot selected. all = the attributes apply to all slots. notApplicable = the selected alarm is for system level.
INT agnCnfgAlrStartReportOff	1.3.6.1.4.1.164.3.1.2.2.8.3.1.3	INTEGER	read-write	This object specifies the severity from which alarms will be reported. Alarms having this severity or higher, will be reported. This object specifies the report severity only for alarms that turn to OFF state. notApplicable - for 'relay','alrLedOn','alrLedBlink', 'relay2' report types, in MP. noReport - no Report at all (for any severity).
INT agnCnfgAlrStartReportOn	1.3.6.1.4.1.164.3.1.2.2.8.3.1.2	INTEGER	read-write	This object specifies the severity from which alarms will be reported. Alarms having this severity or higher, will be reported. This object specifies the report severity only for alarms that turn to ON state. noReport - no Report at all (for any severity).
agnCnfgAlrTable	1.3.6.1.4.1.164.3.1.2.2.8.2		not-accessible	This table enables the user to set attributes to each alarm. Setting for a non-existing entry agnCnfgAlrMask, agnCnfgAlrInvert or agnCnfgAlrFilter to 'yes'(or yesAndSave for Mask) will add this new entry to the table. Setting for an existing entry agnCnfgAlrMask/ agnCnfgAlrInvert/agnCnfgAlrFilter (one or more) to 'no' (noAndSave for Mask) so that ALL these objects' values are 'no' , will delete this entry from the table. For agnCnfgAlrMask, only if [(last saved value=noAndSave) AND (new value is 'no' or 'noAndSave')] the object's value is considered 'no' for deleting the entry.
agnCnfgDataEntry	1.3.6.1.4.1.164.3.1.2.2.7.1		not-accessible
agnCnfgDataTable	1.3.6.1.4.1.164.3.1.2.2.7		not-accessible	This table contains data about the agent configurations. The table will support only data about valid configurations of the agent.
STR agnCnfgDesc	1.3.6.1.4.1.164.3.1.2.2.7.1.2	DisplayString	read-write	This object is a description of the Configuration, entered by user, to enhance Cnfg recognition.
INT agnCnfgIdx	1.3.6.1.4.1.164.3.1.2.2.7.1.1	INTEGER	read-only	This object indicates the Idx of the agent' Cnfg the following objects refer. 255=Temporary Cnfg (Set is done only to this configuration).
STR agnCnfgUpdDate	1.3.6.1.4.1.164.3.1.2.2.7.1.3	DisplayString	read-only	This object indicates the date when last update of this configuration was performed, as it is known by the agent using its own real-time clock. The format would be as specified by the agnSDateFormat. When update is performed, the agent should save the date.
IP agnCnfgUpdMnger	1.3.6.1.4.1.164.3.1.2.2.7.1.5	IpAddress	read-only	This object indicates the IP Address of the Manager who performed the last update of this configuration. When update is performed, the agent should save the IP Address of the Manager who commanded the update. That will enable a manager to know if he performed the last update, or another manager did.
STR agnCnfgUpdTime	1.3.6.1.4.1.164.3.1.2.2.7.1.4	DisplayString	read-only	This object indicates the time when last update of this configuration was performed, as it is known by the agent using its own real-time clock. When update is performed, the agent should save the time.
INT agnCOffsetCmd	1.3.6.1.4.1.164.3.1.2.2.9	INTEGER	read-write	An object defining special user request. notApplicable - is RO value for products that do not support this object. normal - nothing special u1 - user 1 - for all Voice cards, the DISPLAYED Tx and Rx Levels will have the following Offsets: - 2 Wires port: Tx Level: the base value (for 0dBm) = 0 Rx Level: the base value (for 0dBm) = -2 - 4 Wires port: Tx Level: the base value (for 0dBm) = -16 Rx Level: the base value (for 0dBm) = 7 The MIB and application DB will use the values without Offset.
OCT agnConfigMsg	1.3.6.1.4.1.164.6.2.6	OCTET STRING	read-only	Full configuration message coded in internal RAD application format. This entry describes agent's configuration. For MP-2200 R3, this object describes agent's support of the V5.1 feature: 1 octet ; bit 0 (LSB). '1' - V5.1 feature is supported '0' - V5.1 feature is not supported.
INT agnCSanityCheckCmd	1.3.6.1.4.1.164.3.1.2.2.1	INTEGER	read-write	Setting this attribute to on(3) will initiate the process of Sanity check on the TmpCnfg. Upon completion the value will automatically be changed to off(2).
INT agnCSaveCnfgIdxCmd	1.3.6.1.4.1.164.3.1.2.2.2	INTEGER	read-write	This attribute specifies the Id of the target RealCnfg to which the TmpCnfg should be transferred. Upon set command the MUX will initiate the Sanity-Check process first. If successful, the actual transfer will be performed. If warnings are detected, the user will have to perform the command again to confirm the operation. Setting this object a second time to the same value without performing any change in the database, will cause the result: agnSSanityCheckStatus = unknown
INT agnCSaveFlipDbCmd	1.3.6.1.4.1.164.3.1.2.5.4.2	INTEGER	read-write	Setting this attribute to on(3) will initiate the process of Sanity check on the Temp Flip Db and if it is OK, it will save the Flip Db in the NVRAM, activating the new Flip DB . If check detects errors, the save will not be performed. Afterwards, the object's value will change automatically to off(2).
INT agnCSaveNetCnfgIdxCmd	1.3.6.1.4.1.164.3.1.2.5.4.3	INTEGER	read-write	This attribute specifies the Id of the target NVRAM Cnfg to which the TmpCnfg should be transferred. Upon set command the MUX will initiate the Sanity-Check process first. If successful, the actual transfer will be performed. If warnings are detected, the user will have to perform the command again to confirm the operation. Setting this object a second time to the same value without performing any change in the database, will cause the result: agnSSanityCheckStatus = unknown. This attribute doesn't cause actual Flip.
INT agnCSaveNetFlipDbCmd	1.3.6.1.4.1.164.3.1.2.5.4.4	INTEGER	read-write	Setting this attribute to on(3) will save the Temp Flip DB Into the NVRAM without actual flip.
INT agnDlciCmprCnfgIdx	1.3.6.1.4.1.164.3.1.2.3.2.1.1	INTEGER	read-only	This attribute indicates the configuration to which the Compressed information is related.
INT agnDlciCmprDlciIdx	1.3.6.1.4.1.164.3.1.2.3.2.1.3	INTEGER	read-only	This attribute indicates a unique identifier of the Dlci, the compressed information relates to. The values are between 16 - 991.
agnDlciCmprEntry	1.3.6.1.4.1.164.3.1.2.3.2.1		not-accessible
OCT agnDlciCmprObj	1.3.6.1.4.1.164.3.1.2.3.2.1.4	OCTET STRING	read-write	This attribute is the compressed information itself.
agnDlciCmprTable	1.3.6.1.4.1.164.3.1.2.3.2		not-accessible
INT agnDlciCmprVersion	1.3.6.1.4.1.164.3.1.2.3.2.1.2	INTEGER	read-only	This attribute indicates the version of the internal format of the Compressed data
INT agnDlciCnfgIdx	1.3.6.1.4.1.164.3.1.2.8.1.1.1	INTEGER	read-only	This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.
agnDlciEntry	1.3.6.1.4.1.164.3.1.2.8.1.1		not-accessible
INT agnDlciFunnelEnable	1.3.6.1.4.1.164.3.1.2.8.1.1.15	INTEGER	read-write	This object selects Funnel activation enable/disable: - disabled: Funnel operation disabled. The agnDlciTxBe and agnDlciTxBc values are not used for funneling. - enabled : Funnel operation enabled. The agnDlciTxBe and agnDlciTxBc values are used for funneling calculations. This object is relevant only for an encapsulating DLCI. In case of a Link Selector DLCI, the agnDlciTxBe and agnDlciTxBc values are used for bandwidth of Link Selector. Default=disabled.
INT agnDlciHIdx	1.3.6.1.4.1.164.3.1.2.8.1.1.7	INTEGER	read-only	This attribute indicates a unique internal connection dlci number which the src dlci is routed to.
INT agnDlciHPrtIdx	1.3.6.1.4.1.164.3.1.2.8.1.1.6	INTEGER	read-only	This attribute indicates a unique port id which the dlci is routed to.
INT agnDlciHSltIdx	1.3.6.1.4.1.164.3.1.2.8.1.1.5	INTEGER	read-only	This attribute indicates a unique slot position In the Mux (Agent) where the dlci is routed to. For ISDN BRI ports of MX300/30 units: io1(5) = isdn1(5) and io2(6) = isdn2(6) In the ?004 Unit the entries io6(10)..io16) are not valid
INT agnDlciLIdx	1.3.6.1.4.1.164.3.1.2.8.1.1.4	INTEGER	read-only	This attribute indicates a unique index for each possible used dlci(16..991). 0=notApplicable (for voice switching) LIdx is defined according one of the following possiblities: 1. LSlotIdx is < HSlotIdx. 2. LSlotIdx is = HSlotIdx and LPrtIdx is < HPrtIdx. 3. LSlotIdx is = HSlotIdx and LPrtIdx is = HPrtIdx but LIdx is < HIdx.
INT agnDlciLPrtIdx	1.3.6.1.4.1.164.3.1.2.8.1.1.3	INTEGER	read-only	This attribute indicates a unique external or internal port number, including linkSelector or encapsulator. 100=noConnect (for voice switching) LPrtIdx is defined according one of the following possiblities: 1. LSlotIdx is < HSlotIdx. 2. LSlotIdx is = HSlotIdx and LPrtIdx is < HPrtIdx. 3. LSlotIdx is = HSlotIdx and LPrtIdx is = HPrtIdx but LIdx is < HIdx.
INT agnDlciLSltIdx	1.3.6.1.4.1.164.3.1.2.8.1.1.2	INTEGER	read-only	This attribute indicates a unique slot position where the card is inserted. vs=Voice Switching In the ?004 Unit the entries io6(10)..io16) are not valid. For ISDN BRI ports of MX300/30 units: io1(5) = isdn1(5) and io2(6) = isdn2(6) LSlotIdx is defined according one of the following possiblities: 1. LSlotIdx is < HSlotIdx. 2. LSlotIdx is = HSlotIdx and LPrtIdx is < HPrtIdx. 3. LSlotIdx is = HSlotIdx and LPrtIdx is = HPrtIdx but LIdx is < HIdx.
INT agnDlciPriority	1.3.6.1.4.1.164.3.1.2.8.1.1.12	INTEGER	read-write	This attribute indicates a unique priority of the pcv. 1 is the lowest priority and 7 is the highest priority.
INT agnDlciRoutingProtocol	1.3.6.1.4.1.164.3.1.2.8.1.1.16	INTEGER	read-write	This object is relevant only when one side of the DLCI is a CL-NMS interface. It defines which Routing Protocol will be used for management via CL-NMS port. notApplicable will be used for all slots but CL. rip is a proprietary rip protocol. Default=rip.
INT agnDlciRowStatus	1.3.6.1.4.1.164.3.1.2.8.1.1.17	INTEGER	read-write	This attribute allows to create/delete a row in this table. For creating a row, the NMS should set agnRowStatus.255.id2.id3.id4.id5.id6.id7 = active(1). For destroying a row, the NMS should set: agnRowStatus.255.id2.id3.id4.id5.id6.id7 = destroy(6). Only rows with status active(1) are relevant.
INT agnDlciRxBc	1.3.6.1.4.1.164.3.1.2.8.1.1.10	INTEGER	read-write	This attribute indicates a unique Rx committed bandwidth on the user receive line or at the port transmit line.
INT agnDlciRxBe	1.3.6.1.4.1.164.3.1.2.8.1.1.11	INTEGER	read-write	This attribute indicates a unique Rx excess bandwidth on the user receive line or at the port transmit line.
INT agnDlciSpoofing	1.3.6.1.4.1.164.3.1.2.8.1.1.14	INTEGER	read-write	This object refers to sending of RIP messages: - yes : RIP messages will be sent ONLY if there is a change in the Net. - no : RIP messages will be always sent. This object is relevant only when one side of the DLCI is a CL-NMS interface. Default=no.
INT agnDlciStatus	1.3.6.1.4.1.164.3.1.2.8.1.1.13	INTEGER	read-only	This attribute indicates the status of the pvc. The status is disconnected(1) when one of the sides is programmed as not connected
agnDlciTable	1.3.6.1.4.1.164.3.1.2.8.1		not-accessible	The write operation into the Table Objects is valid only to the TmpCnfg entry.
INT agnDlciTxBc	1.3.6.1.4.1.164.3.1.2.8.1.1.8	INTEGER	read-write	This attribute indicates a unique Tx committed bandwidth on the user transmit line or at the port receive line.
INT agnDlciTxBe	1.3.6.1.4.1.164.3.1.2.8.1.1.9	INTEGER	read-write	This attribute indicates a unique Tx excess bandwidth on the user transmit line or at the port receive line.
agnFlipDb	1.3.6.1.4.1.164.3.1.2.5
agnFlipDbControls	1.3.6.1.4.1.164.3.1.2.5.4
OCT agnGlobalAlarmMask	1.3.6.1.4.1.164.6.2.19	OCTET STRING	read-write	The value of this attribute determines the alarm traps the agent should mask and not send to the managers. Each bit from a certain octet represents a certain alarm.
STR agnHwVersion	1.3.6.1.4.1.164.6.2.1	DisplayString	read-write	ASCII string for description and display of the agent hardware version, as it is known by the agent software.The user can update the version upon request when he changes components in the agent's module
INT agnIndication	1.3.6.1.4.1.164.6.2.8	INTEGER	read-only	Attribute describing the state of the entity the agent is responsible for. In case of a modular entity, the value of this attribute will be according to the component which is in the worst state. The order of severity (from top to bottom) is: faulty (critical)-> major-> minor-> warning-> event-> normal (off).
OCT agnLed	1.3.6.1.4.1.164.6.2.10	OCTET STRING	read-only	This entry specifies the LEDs status of the agent module . Each led will be represented by 4 bits where the first 2 bits (left) will specify the status : (00=NA, 01=OFF, 10=ON, 11=BLINK), and the next two bits (right) will specify the color : (00=GREEN, 01=RED, 10=YELLOW, 11=ORANGE)
agnLinkMapEntry	1.3.6.1.4.1.164.3.1.5.1.1		not-accessible
agnLinkMapTable	1.3.6.1.4.1.164.3.1.5.1		not-accessible
agnListDecoding	1.3.6.1.4.1.164.3.1.2.7
INT agnListDecodingAcmRelayPrt	1.3.6.1.4.1.164.3.1.2.7.1.1.7	INTEGER	read-write	This object indicates the ACM port within the slot, desired for outbound relay (report) for the selected alarm. notApplicable - when agnListDecodingType=sanity OR when agnListDecodingAcmRelaySlt=notApplicable.
INT agnListDecodingAcmRelaySlt	1.3.6.1.4.1.164.3.1.2.7.1.1.6	INTEGER	read-write	This object indicates the ACM slot, desired for outbound relay (report) for the selected alarm. In the ?004 Unit the entries io6(10)..io12(16) are not valid. none - when agnListDecodingType=alr AND the selected alarm should not be reported by an ACM card. notApplicable - when agnListDecodingType=sanity OR when [agnListDecodingType=alr and there is no ACM card installed in the Mux].
INT agnListDecodingCode	1.3.6.1.4.1.164.3.1.2.7.1.1.2	INTEGER	read-only	The specific code for which decoding is needed.
INT agnListDecodingDefState	1.3.6.1.4.1.164.3.1.2.7.1.1.4	INTEGER	read-only	This object is applicable only for agnListDecodingType=alr. It reports the default state/severity of each alarm. User can change the severity of the alarms defined by this default via the agnListDecodingSeverity object.
STR agnListDecodingDescription	1.3.6.1.4.1.164.3.1.2.7.1.1.3	DisplayString	read-only	The description fitting the specific code and type of list required.
agnListDecodingEntry	1.3.6.1.4.1.164.3.1.2.7.1.1		not-accessible
INT agnListDecodingSeverity	1.3.6.1.4.1.164.3.1.2.7.1.1.5	INTEGER	read-write	This object is applicable only for agnListDecodingType=alr. It enables the user to select a severity for each alarm. The severity is set per alarm code (same for all slots/ports using this code). event - can be set only for an alarm that is defined by default as 'event'. User can change the severity of the alarms defined by default as minor or major. The severity of an event may be set to another severity, but the change will actually happen only if the event threshold is active and passed the Set/ON condition. An event alarm that passed the threshold and changed its severity, will return automatically to event severity when meeting its Reset/OFF condition.
agnListDecodingTable	1.3.6.1.4.1.164.3.1.2.7.1		not-accessible	A decoding table . For each type of list, a description is given for each existing code.
INT agnListDecodingType	1.3.6.1.4.1.164.3.1.2.7.1.1.1	INTEGER	read-only	The type of list the decoding data refers to. alr - Alarms list sanity - Sanity Check Error list.
INT agnMonitorModeCmd	1.3.6.1.4.1.164.6.2.9	INTEGER	read-write	Setting this attribute to ON, will enforce the agent to change its mode of operation to Monitor Mode
agnMux	1.3.6.1.4.1.164.3.2.1
agnSa	1.3.6.1.4.1.164.3.1.2.6
INT agnSActiveCnfg	1.3.6.1.4.1.164.3.1.2.1.4	INTEGER	read-only	This entry specifies the unique identifier of the configuration, that is currently active and running.
INT agnSAlrCode	1.3.6.1.4.1.164.3.1.2.1.15.1.3	INTEGER	read-only	A code identifying the alarm of an entry in the alarm status table at system level.
STR agnSAlrCodeDescription	1.3.6.1.4.1.164.3.1.2.1.15.1.2	DisplayString	read-only	This attribute is a full text description of the alarm . The alarm description includes the following information: alarm code, alarm text, alarm severity, Masked or Inverted flag and counter.
INT agnSAlrCounter	1.3.6.1.4.1.164.3.1.2.1.15.1.6	INTEGER	read-only	A counter - how many times the alarm occured since last clear operation. ON and OFF Alarm will be counted separately.
agnSAlrEntry	1.3.6.1.4.1.164.3.1.2.1.15.1		not-accessible
INT agnSAlrIdx	1.3.6.1.4.1.164.3.1.2.1.15.1.1	INTEGER	read-only	A unique number to identify an entry in the alarm status table of the agent.
INT agnSAlrInvert	1.3.6.1.4.1.164.3.1.2.1.15.1.8	INTEGER	read-only	Alarm invert : on/off.
INT agnSAlrMask	1.3.6.1.4.1.164.3.1.2.1.15.1.7	INTEGER	read-only	Alarm mask : on/off.
INT agnSAlrSeverity	1.3.6.1.4.1.164.3.1.2.1.15.1.4	INTEGER	read-only	The severity of the alarm.
INT agnSAlrState	1.3.6.1.4.1.164.3.1.2.1.15.1.5	INTEGER	read-only	State of the alarm.
INT agnSAlrStatus	1.3.6.1.4.1.164.3.1.2.1.10	INTEGER	read-only	Indicates the alarm state in the agent level, i.e. lower level (card/port) alarms not included. critical(7) - when there is at least one active (state ON) critical alarm, otherwise it will be set to major(5) - when there is at least one active (state ON) major alarm, otherwise it will be set to minor(4) - if there is at least one active (state ON) minor alarm, otherwise it will be set to warning(6) - if there is at least one active (state ON) warning alarm, otherwise it will be set to event(3) - if there was at least one alarm event (including state on,off events) since the last clear operation.
INT agnSAlrStatusAll	1.3.6.1.4.1.164.3.1.2.1.11	INTEGER	read-only	Indicates the alarm state of the entire agent, i.e. including card and port alarms status. critical(7) - when there is at least one active (state ON) critical alarm, otherwise it will be set to major(5) - when there is at least one active (state ON) major alarm, otherwise it will be set to minor(4) - if there is at least one active (state ON) minor alarm, otherwise it will be set to warning(6) - if there is at least one active (state ON) warning alarm, otherwise it will be set to event(3) - if there was at least one alarm event (including state on,off events) since the last clear operation.
agnSAlrTable	1.3.6.1.4.1.164.3.1.2.1.15		not-accessible	List of agent related alarms and indications for alarms at system level.
INT agnSaSwchStatus	1.3.6.1.4.1.164.3.1.2.6.1	INTEGER	read-only	This object indicates the status of the switches on the stand-alone unit. Each switch is represented by a bit. The status is a sum of 2**n, according to the bits: bit 0 NMS (LSB) bit 1 Terminal '1' = forces the DCE to be terminal with Rate=9600bps, Data bits=8, Stop bits=1 bit 2 Xray bit 3 SW-Load '1' = when SW is loaded bit 4 DBS Default of all bits=0 When the status of these switches is unknown, the value of this object is 255.
INT agnSClearAllAlrCmd	1.3.6.1.4.1.164.3.1.2.1.17	INTEGER	read-write	Setting this attribute to ON, enforce a clear operation on all MUX alarm events at the levels of agent, slots and ports. The clear operation will not be applied for masked/inverted alarms.
INT agnSClearAlrCmd	1.3.6.1.4.1.164.3.1.2.1.16	INTEGER	read-write	Setting this attribute to ON, enforce a clear operation on all the agent(general) events. General alarms are alarms which are not specific to a card or port. The clear operation will not be applied for masked/inverted alarms.
INT agnSClkSrc	1.3.6.1.4.1.164.3.1.2.1.9	INTEGER	read-only	This entry indicates the source of the system clock.
INT agnSCmprErrIdx	1.3.6.1.4.1.164.3.1.2.3.5.1.2	INTEGER	read-only	Unique number to identify an entry in the errors list table. The maximum entry value cannot exceed the value of 'agnSNoOfSanityCheckErr'.
agnSCmprErrListEntry	1.3.6.1.4.1.164.3.1.2.3.5.1		not-accessible
agnSCmprErrListTable	1.3.6.1.4.1.164.3.1.2.3.5		not-accessible
OCT agnSCmprErrObj	1.3.6.1.4.1.164.3.1.2.3.5.1.3	OCTET STRING	read-only	This attribute is a full text description of the error, including: error code, slot and port numbers related to the code .
INT agnSCmprErrVersion	1.3.6.1.4.1.164.3.1.2.3.5.1.1	INTEGER	read-only	The version of the compressed data
agnSCnfgEntry	1.3.6.1.4.1.164.3.1.2.1.22.1		not-accessible
agnSCnfgTable	1.3.6.1.4.1.164.3.1.2.1.22		not-accessible	This table contains an entry per configuration. It indicates if the configuration is valid.
STR agnSDateCmd	1.3.6.1.4.1.164.3.1.2.1.2	DisplayString	read-write	This entry indicates the current date as it is known by the agent using its own real-time clock. The format would be as specified by the agnSDateFormat. This parameter can be set for time synchronization between the NMS and the Agent.
INT agnSDateFormat	1.3.6.1.4.1.164.3.1.2.1.1	INTEGER	read-write	This entry indicates the date and time format used for the agnSDateAndTimeCmd and for the alarm history report. MP-2100H, MP-2100 r1-r4 and MAXcess products do not support the 'yyyyMMDD' format.
INT agnSEditBy	1.3.6.1.4.1.164.3.1.2.1.8	INTEGER	read-only	This entry indicates which MMI application is working on the edited config. The editing phase starts at the first modify operation and ends after an update(load) operation.
INT agnSEditCnfg	1.3.6.1.4.1.164.3.1.2.1.5	INTEGER	read-only	This entry indicates the unique identifier of the configuration that is currently loaded into the tmp working space for manipulation and update operations. Value of 255 means no config. is under editing process.
INT agnSEntryIdx	1.3.6.1.4.1.164.3.1.2.1.22.1.1	INTEGER	read-only	Unique number to identify an entry in the configuration table.
INT agnSEntryIsValid	1.3.6.1.4.1.164.3.1.2.1.22.1.2	INTEGER	read-only	This attribute indicates whether the specific configuration is valid in the MUX . Value of NO indicates: no such configuration in the MUX.
STR agnSErrDescription	1.3.6.1.4.1.164.3.1.2.1.20.1.2	DisplayString	read-only	This attribute is a full text description of the sanity check error including error code, slot and port numbers related to the code .
INT agnSErrIdx	1.3.6.1.4.1.164.3.1.2.1.20.1.1	INTEGER	read-only	Unique number to identify an entry in the error list table. The maximum entry value cannot exceed the value of 'agnSNoOfSanityCheckErr'.
agnSErrListEntry	1.3.6.1.4.1.164.3.1.2.1.20.1		not-accessible
agnSErrListTable	1.3.6.1.4.1.164.3.1.2.1.20		not-accessible	List of errors and warnings found during Sanity Check process.
agnSigProfile	1.3.6.1.4.1.164.3.1.2.10
OCT agnSigProfileABCD	1.3.6.1.4.1.164.3.1.2.10.1.1.4	OCTET STRING	read-write	This object represents 6 parameters, by 3 Octets : Busy Code-MSB nibble, - applicable only for Rx translation Idle Code- nibble, - applicable only for Rx translation D Bit Code- nibble, C Bit Code- nibble, B Bit Code- nibble, A Bit Code-LSB nibble. Each of Busy and Idle Code nibble will have the valid values: 0000 .. FFFF. Each of A,B,C,D Bit Code nibble represents: 0 hex = 0000 = 0 1 hex = 0001 = 1 2 hex = 0010 = A bit 3 hex = 0011 = B bit 4 hex = 0100 = C bit 5 hex = 0101 = D bit 6 hex = 0110 = A bit inverse 7 hex = 0111 = B bit inverse 8 hex = 1000 = C bit inverse 9 hex = 1001 = D bit inverse A-F hex - not used (invalid values)
INT agnSigProfileCnfgIdx	1.3.6.1.4.1.164.3.1.2.10.1.1.1	INTEGER	read-only	This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. The write operation is valid only to the TmpCnfg.
agnSigProfileEntry	1.3.6.1.4.1.164.3.1.2.10.1.1		not-accessible
INT agnSigProfileIdx	1.3.6.1.4.1.164.3.1.2.10.1.1.2	INTEGER	read-only	This attribute indicates the Signaling Profile (1..5).
INT agnSigProfileRxTx	1.3.6.1.4.1.164.3.1.2.10.1.1.3	INTEGER	read-only	This attribute indicates if the following objects refer to: Rx or Tx translation. Rx : ML->IO Tx : IO->ML .
agnSigProfileTable	1.3.6.1.4.1.164.3.1.2.10.1		not-accessible	The write operation into the Table Objects is valid only to the TmpCnfg entry.
STR agnSLastCnfgFlipCause	1.3.6.1.4.1.164.3.1.2.1.7	DisplayString	read-only	This entry describes the flip's cause.
STR agnSLastCnfgFlipTime	1.3.6.1.4.1.164.3.1.2.1.6	DisplayString	read-only	This entry indicates the Date & Time of the last flip to the current configuration at the agent.
INT agnSMaskedAlrStat	1.3.6.1.4.1.164.3.1.2.1.12	INTEGER	read-only	Indicates the alarm state in the agent level,[ i.e. lower level (card/port) alarms not included] including Masked alarms. critical(7) - when there is at least one active (state ON) critical alarm, otherwise it will be set to major(5) - when there is at least one active (state ON) major alarm, otherwise it will be set to minor(4) - if there is at least one active (state ON) minor alarm, otherwise it will be set to warning(6) - if there is at least one active (state ON) warning alarm, otherwise it will be set to event(3) - if there was at least one alarm event (including state on,off events) since the last clear operation.
INT agnSMaskedAlrStatAll	1.3.6.1.4.1.164.3.1.2.1.13	INTEGER	read-only	Indicates the alarm state of the entire agent, i.e. including card and port alarms status,including Masked alarms. critical(7) - when there is at least one active (state ON) critical alarm, otherwise it will be set to major(5) - when there is at least one active (state ON) major alarm, otherwise it will be set to minor(4) - if there is at least one active (state ON) minor alarm, otherwise it will be set to warning(6) - if there is at least one active (state ON) warning alarm, otherwise it will be set to event(3) - if there was at least one alarm event (including state on,off events) since the last clear operation.
INT agnSMaxNoOfCnfg	1.3.6.1.4.1.164.3.1.2.1.21	INTEGER	read-only	Maximum number of configurations that can be defined and stored in the MUX. If the mux has a large capacity, the maximum will be limited to 254.
INT agnSNoOfSanityCheckErr	1.3.6.1.4.1.164.3.1.2.1.19	INTEGER	read-only	This entry indicates the number of errors/warnings discovered by the last SanityCheck process.
OID agnSpecific	1.3.6.1.4.1.164.6.2.5	OBJECT IDENTIFIER	read-only	Object identifier of entity containing additional information regarding this instance.
INT agnSSanityCheckStatus	1.3.6.1.4.1.164.3.1.2.1.18	INTEGER	read-only	Upon completion of the Sanity check process on the TmpCnfg this attribute will be set to: FAIL(2) - when there is at least one error encountered and possibly some warnings. WARNING(3) - when there are only warnings. otherwise, the value will be OK(4). The value will be UNKNOWN(1) if changes were made in the TmpCnfg following the last Sanity check.
NTF agnStatusChangeTrap	1.3.6.1.4.1.164.6.1.0.2			This trap is sent whenever the state of the entity the agent is responsible for changed. TDM devices will send agnTestStatus variable to indicate the current test status.
STR agnSTimeCmd	1.3.6.1.4.1.164.3.1.2.1.3	DisplayString	read-write	This entry indicates the current time as it is known by the agent using its own real-time clock. This parameter can be set for time synchronization between the NMS and the Agent.
INT agnSTstStatAll	1.3.6.1.4.1.164.3.1.2.1.14	INTEGER	read-only	on(3) - when there is at least one test in progress in one of the agent cards, otherwise the value will be off(2).
agnSystemDlci	1.3.6.1.4.1.164.3.1.2.8
agnSystemTs	1.3.6.1.4.1.164.3.1.2.11
agnt	1.3.6.1.4.1.164.6.2
INT agnTestStatus	1.3.6.1.4.1.164.6.2.22	INTEGER	read-only	Indicates the current test status (for all levels: system, card, port). This attribute will be set to: on(3): when there is at least one test in progress on the system/card/port off(2): when there is NO test in progress on the system/card/port
INT agnTrapMask	1.3.6.1.4.1.164.6.2.2	INTEGER	read-write	The value of this attribute determines the type of traps the agent should mask and not send to the management console. The value is differently determined for different products. There are mainly two methods: - an integer number, specifying the traps' severity. - a sum of 2**n, where n is a bit assigned to a certain masked trap group. User should consult the product specification, to find out the method employed.
OCT agnTrapValue	1.3.6.1.4.1.164.6.2.3	OCTET STRING	read-only	The value of the trap decoded in internal RAD format. Full description is given in the Trap definition file
INT agnTsBitIdx	1.3.6.1.4.1.164.3.1.2.11.1.1.5	INTEGER	read-only	This attribute indicates a unique index for the Bit of each TS (Time-Slot). 1..8 - Bit 1.. Bit 8 255 - notApplicable This object is applicable only in Split Time-Slot cases.
INT agnTsCmprCnfgIdx	1.3.6.1.4.1.164.3.1.2.3.6.1.2	INTEGER	read-only	This object indicates the configuration to which the Compressed information is related. 255=temporary configuration. Set can be performed only to the temporary configuration.
OCT agnTsCmprData	1.3.6.1.4.1.164.3.1.2.3.6.1.6	OCTET STRING	read-write	This object is the compressed information itself. It provides information about all TSs of a port.
agnTsCmprEntry	1.3.6.1.4.1.164.3.1.2.3.6.1		not-accessible
INT agnTsCmprPduIdx	1.3.6.1.4.1.164.3.1.2.3.6.1.5	INTEGER	read-only	This object indicates the PDU index within the same port. That provides for the case when one PDU is not sufficient for all TS Assignment data of the same port.
INT agnTsCmprPortIdx	1.3.6.1.4.1.164.3.1.2.3.6.1.4	INTEGER	read-only	This object indicates the Port within the Slot, to which the Compressed information is related. For Port Index see each product's spec.
INT agnTsCmprSlotIdx	1.3.6.1.4.1.164.3.1.2.3.6.1.3	INTEGER	read-only	This object indicates the Slot to which the Compressed information is related. For MP-2100: IO-1..IO-12 = (5).. (16) For DXC-30 : IO-1..IO-15 = (5).. (19).
agnTsCmprTable	1.3.6.1.4.1.164.3.1.2.3.6		not-accessible
INT agnTsCmprVerIdx	1.3.6.1.4.1.164.3.1.2.3.6.1.1	INTEGER	read-only	This object indicates the version of the internal format of the Compressed data.
INT agnTsCnfgIdx	1.3.6.1.4.1.164.3.1.2.11.1.1.1	INTEGER	read-only	This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.
INT agnTsConIdx	1.3.6.1.4.1.164.3.1.2.11.1.1.8	INTEGER	read-only	This attribute indicates a unique TS number the Src TS is routed to. Valid values: - for T1 ports - 1..24, Fbit(25) - for E1 ports - 1..31 - for HDSL ports - 1..32 ; 32 will represent TS0. - notApplicable - 255 (for ports that don't have TSs).
INT agnTsConPrtIdx	1.3.6.1.4.1.164.3.1.2.11.1.1.7	INTEGER	read-only	This attribute indicates a unique port id the TS is routed to. notApplicable - when agnTsType=mng or spare For MP: exPrt1 (1) .. exPrt12 (12) , notApplicable(100), inPrt1 (101) .. inPrt48 (148).
INT agnTsConSltIdx	1.3.6.1.4.1.164.3.1.2.11.1.1.6	INTEGER	read-only	This attribute indicates a unique slot position In the Mux where the TS is routed to.
INT agnTsDirection	1.3.6.1.4.1.164.3.1.2.11.1.1.11	INTEGER	read-write	Direction of the connection. This parameter is especially important when in MP a ML is connected to an IO port that has no TSs, so it doesn't appear in the TS Assignment for the first 5 indexes. notApplicable - for products that do not support this object or for certain TS Types (for example: mng, spare) rx - the ML only Receives from the IO Port (the ML will appear in the first 5 indexes). tx - the ML only Transmits to the IO Port (the ML will appear in the first 5 indexes). Nothing is received back. both - the ML Receives and Transmits to the IO Port (the ML will appear in the first 5 indexes). bcastSrc - the ML is a Broadcast-Bidirectional Source. It Transmits to one or several IO Ports (including the one that appears in the last 3 indexes) and sometimes receives. The Port that responds is dynamic (it can be another each time). The ML will appear in the first 5 indexes. bcastDst - the ML is a Broadcast-Bidirectional Destination. Therefore, it Receives and sometimes Transmits. The ML will appear in the first 5 indexes.
agnTsEntry	1.3.6.1.4.1.164.3.1.2.11.1.1		not-accessible
INT agnTsIdx	1.3.6.1.4.1.164.3.1.2.11.1.1.4	INTEGER	read-only	This attribute indicates a unique index for TS (Time-Slot). - for T1 ports - 1..24, Fbit(25) - for E1 ports - 1..31 - for HDSL ports - 1..32 ; 32 will represent TS0.
INT agnTsPrtIdx	1.3.6.1.4.1.164.3.1.2.11.1.1.3	INTEGER	read-only	This attribute indicates a unique external or internal port number. For MP: exPrt1 (1) , exPrt2 (2) , exPrt3 (3) , exPrt4 (4) , exPrt5 (5) , exPrt6 (6) , exPrt7 (7) , exPrt8 (8) , exPrt9 (9) , exPrt10 (10) , exPrt11 (11) , exPrt12 (12) , inPrt1 (101) , inPrt2 (102) , inPrt3 (103) , inPrt4 (104) , inPrt5 (105) , inPrt6 (106) , inPrt7 (107) , inPrt8 (108) , inPrt9 (109) , inPrt10 (110) , inPrt11 (111) , inPrt12 (112)
INT agnTsRowStatus	1.3.6.1.4.1.164.3.1.2.11.1.1.10	INTEGER	read-write	This attribute allows to create/delete a row in this table. For creating a row, the NMS should set agnTsRowStatus.255.id2.id3.id4.id5.id6.id7.id8 = active(1). For destroying a row, the NMS should set: agnTsRowStatus.255.id2.id3.id4.id5.id6.id7.id8 = destroy(6). Only rows with status active(1) are relevant.
INT agnTsSltIdx	1.3.6.1.4.1.164.3.1.2.11.1.1.2	INTEGER	read-only	This attribute indicates a unique slot position where the card is inserted.
agnTsTable	1.3.6.1.4.1.164.3.1.2.11.1		not-accessible	The write operation into the Table Objects is valid only to the TmpCnfg entry.
INT agnTsType	1.3.6.1.4.1.164.3.1.2.11.1.1.9	INTEGER	read-write	Time-Slot Type - regarding its connection and media type. voice, data, vcMP - connected and the media is specified. mng - management. This TS is Dedicated to Management (not disconnected, but not connected to another port). spare - applicable for ML-20 only. These TSs should be reserved for future connection, though at the moment are not connected.
agnVoiceSwConfEntry	1.3.6.1.4.1.164.3.1.2.9.1.1		not-accessible
INT agnVoiceSwConfHGConnect	1.3.6.1.4.1.164.3.1.2.9.5.1.3	INTEGER	read-write	This attribute indicates whether the hunt group should be considered in any of the mux algorithms.
INT agnVoiceSwConfHGdbIdx	1.3.6.1.4.1.164.3.1.2.9.5.1.1	INTEGER	read-only	Active or Temporary Table. Both configurations can be read but only the Temporary can be written to.
agnVoiceSwConfHGEntry	1.3.6.1.4.1.164.3.1.2.9.5.1		not-accessible
INT agnVoiceSwConfHGExt	1.3.6.1.4.1.164.3.1.2.9.5.1.4	INTEGER	read-write	This is the extension number of the hunt group. 0 is for not valid. The allowed range is 10 - 99.
INT agnVoiceSwConfHGIdx	1.3.6.1.4.1.164.3.1.2.9.5.1.2	INTEGER	read-only	There may be up to 10 Hunt Groups per MXcess. That's the index of the hunt group relevant to this row.
agnVoiceSwConfHGTable	1.3.6.1.4.1.164.3.1.2.9.5		not-accessible	Table of Hunt Groups.
INT agnVoiceSwConfIdx	1.3.6.1.4.1.164.3.1.2.9.1.1.1	INTEGER	read-only	Active or Temporary Table. Both configurations can be read but only the Temporary can be written to.
STR agnVoiceSwConfNodeId	1.3.6.1.4.1.164.3.1.2.9.1.1.3	DisplayString	read-write	1, 2 or 3 digits, (1-9),(0-9),(0-9).
INT agnVoiceSwConfNoOfHops	1.3.6.1.4.1.164.3.1.2.9.1.1.4	INTEGER	read-write	Number of hops the frame will go through the net before deciding to discard the frame (like time-to-live in IP). 0 = notApplicable Default=20 .
INT agnVoiceSwConfRtAction	1.3.6.1.4.1.164.3.1.2.9.2.1.4	INTEGER	read-write	Action that the system should perform for this digits: agnVoiceSwConfRtDigits.
STR agnVoiceSwConfRtData	1.3.6.1.4.1.164.3.1.2.9.2.1.5	DisplayString	read-write	This field is relevant for actions hgr(6), del(7) and rep(8).
INT agnVoiceSwConfRtDbId	1.3.6.1.4.1.164.3.1.2.9.2.1.1	INTEGER	read-only	Active or Temporary Table. Both configurations can be read but only the Temporary can be written to.
STR agnVoiceSwConfRtDigits	1.3.6.1.4.1.164.3.1.2.9.2.1.3	DisplayString	read-write	Serie of digits or keyword 'ELSE'..
INT agnVoiceSwConfRtDlci	1.3.6.1.4.1.164.3.1.2.9.2.1.8	INTEGER	read-write	Routing DLCI- Relevant for actions zone(2) and node(3). Valid values: 0=notApplicable (for non-routing case). 1, 16..991
agnVoiceSwConfRtEntry	1.3.6.1.4.1.164.3.1.2.9.2.1		not-accessible
INT agnVoiceSwConfRtIdx	1.3.6.1.4.1.164.3.1.2.9.2.1.2	INTEGER	read-only	The Index of the row.
INT agnVoiceSwConfRtPort	1.3.6.1.4.1.164.3.1.2.9.2.1.7	INTEGER	read-write	Routing Port- Relevant for actions zone(2) and node(3). 100=noConnect (for non-routing case).
INT agnVoiceSwConfRtRowStatus	1.3.6.1.4.1.164.3.1.2.9.2.1.9	INTEGER	read-write	Status of the row for creating/deleting entries in the table.
INT agnVoiceSwConfRtSlot	1.3.6.1.4.1.164.3.1.2.9.2.1.6	INTEGER	read-write	Routing Slot- Relevant for actions zone(2) and node(3).
agnVoiceSwConfRtTable	1.3.6.1.4.1.164.3.1.2.9.2		not-accessible	Routing Table for Voice Switching.
agnVoiceSwConfTable	1.3.6.1.4.1.164.3.1.2.9.1		not-accessible	MXcess Configuration for Voice Switching.
STR agnVoiceSwConfZoneId	1.3.6.1.4.1.164.3.1.2.9.1.1.2	DisplayString	read-write	1 or 2 digits, (0-9)(1-9).
agnVoiceSwitching	1.3.6.1.4.1.164.3.1.2.9
agnWanGen	1.3.6.1.4.1.164.3.1.2
agnXCmprEntry	1.3.6.1.4.1.164.3.1.2.3.7.1		not-accessible
INT agnXCmprIdx3	1.3.6.1.4.1.164.3.1.2.3.7.1.3	INTEGER	read-only	3rd index - can be used for any purpose according to the agnXCmprTypIdx. Example: for V5.1 Variant, this attribute indicates the configuration to which the Compressed information is related. 255=temporary configuration. Set can be performed only to the temporary configuration.
INT agnXCmprIdx4	1.3.6.1.4.1.164.3.1.2.3.7.1.4	INTEGER	read-only	4th index - can be used for any purpose according to the agnXCmprTypIdx. Example: for V5.1 Variant,this attribute indicates a unique number of the slot position where the card is inserted. Valid values: psA(1),psB(2),clA(3),clB(4),io1(5)..io12(16); notApplicable=255.
INT agnXCmprIdx5	1.3.6.1.4.1.164.3.1.2.3.7.1.5	INTEGER	read-only	5th index - can be used for any purpose according to the agnXCmprTypIdx. Example: for V5.1 Variant,this attribute indicates a unique identifier of the port the compressed information relates to. Valid values: exPrt1 (1) .. exPrt12 (12) , inPrt1 (101) .. inPrt48 (148).
INT agnXCmprIdx6	1.3.6.1.4.1.164.3.1.2.3.7.1.6	INTEGER	read-only	6th index - can be used for any purpose according to the agnXCmprTypIdx. Example: for V5.1 Variant,this attribute indicates the Variant index. Valid values are: 0..127, 255 (= temp cnfg).Set can be performed only to the temporary configuration.
INT agnXCmprIdx7	1.3.6.1.4.1.164.3.1.2.3.7.1.7	INTEGER	read-only	7th index - can be used for any purpose according to the agnXCmprTypIdx. Example: for V5.1 Variant,this attribute is not needed. Therefore, its value will be always 255=notApplicable.
OCT agnXCmprObj	1.3.6.1.4.1.164.3.1.2.3.7.1.8	OCTET STRING	read-write	This attribute is the compressed information itself.
agnXCmprTable	1.3.6.1.4.1.164.3.1.2.3.7		not-accessible
INT agnXCmprTypIdx	1.3.6.1.4.1.164.3.1.2.3.7.1.1	INTEGER	read-only	This attribute indicates the Type of the Compressed being referred. One of the types is V5.1 Variant data.
INT agnXCmprVersion	1.3.6.1.4.1.164.3.1.2.3.7.1.2	INTEGER	read-only	This attribute indicates the version of the internal format of the Compressed data.
INT alarmSeverity	1.3.6.1.4.1.164.6.2.20	INTEGER	read-only	This object specifies the severity of the alarms.
INT alarmState	1.3.6.1.4.1.164.6.2.21	INTEGER	read-only	.
NTF alarmsTrap	1.3.6.1.4.1.164.3.2.0.1			This trap is sent whenever alarm occurs in the agent.
STR alrBufDescription	1.3.6.1.4.1.164.3.1.2.4.1.1.2	DisplayString	read-only	This entry is a unique text description of the alarm in the buffer. The alarm description includes the following information: alarm code, slot id, card type, channel id , alarm text, alarm status, masked flag and event counter
alrBufEntry	1.3.6.1.4.1.164.3.1.2.4.1.1		not-accessible
alrBuffGen	1.3.6.1.4.1.164.3.1.2.4
INT alrBufIdx	1.3.6.1.4.1.164.3.1.2.4.1.1.1	INTEGER	read-only	This attribute indicates a unique number to identify this entry
alrBufTable	1.3.6.1.4.1.164.3.1.2.4.1		not-accessible
INT alrGenCode	1.3.6.1.4.1.164.3.3.4.3.1.1	INTEGER	read-only	This object is a unique code number, identifying a certain alarm.
INT alrGenDebounce	1.3.6.1.4.1.164.3.3.4.3.1.6	INTEGER	read-write	Debounce time for each alarm code, in seconds. The meaning is, that an alarm will be 'declared' as ON (or OFF), only after it was actually ON/OFF the Debouncing time selected by user. 0 = default debounce selection (each alarm has a default value). 1 = minimum value of seconds for debounce. 255 = mask = the alarm will Never be reported.
STR alrGenDescription	1.3.6.1.4.1.164.3.3.4.3.1.2	DisplayString	read-only	This entry is a unique text description, of the alarm corresponding to the specified code.
alrGenEntry	1.3.6.1.4.1.164.3.3.4.3.1		not-accessible
INT alrGenLevel	1.3.6.1.4.1.164.3.3.4.3.1.3	INTEGER	read-only	Alarm level.
INT alrGenSeverity	1.3.6.1.4.1.164.3.3.4.3.1.5	INTEGER	read-write	This object enables the user to select a severity for each alarm. The severity is set per alarm code (same for all slots/ports using this code).
INT alrGenSlotType	1.3.6.1.4.1.164.3.3.4.3.1.4	INTEGER	read-only	Slot type that the alarm is relevant to. clAndIo - an alarm that is relevant for both CL and IO slots.
alrGenTable	1.3.6.1.4.1.164.3.3.4.3		not-accessible
INT chassTotalNoOfClSlt	1.3.6.1.4.1.164.3.3.1.2.1.4	INTEGER	read-only	This object indicates the number of physical Common Logic slots in the chassis.
INT chassTotalNoOfIoSlt	1.3.6.1.4.1.164.3.3.1.2.1.2	INTEGER	read-only	This object indicates the total number of physical IO slots in the chassis, (not all slots must be occupied and active).
INT chassTotalNoOfMlSlt	1.3.6.1.4.1.164.3.3.1.2.1.5	INTEGER	read-only	This object indicates the number of physical Main Link slots in the chassis (Kmux).
INT chassTotalNoOfPsSlt	1.3.6.1.4.1.164.3.3.1.2.1.3	INTEGER	read-only	This object indicates the number of physical Power Supply slots in the chassis.
INT chassTotalNoOfSlt	1.3.6.1.4.1.164.3.3.1.2.1.1	INTEGER	read-only	This object indicates the number of physical slots in the Hub chassis.
INT chasTotalNoOfClSlt	1.3.6.1.4.1.164.3.1.1.5	INTEGER	read-only	This entry indicates the number of physical Common Logic slots in the chassis.
INT chasTotalNoOfIoSlt	1.3.6.1.4.1.164.3.1.1.3	INTEGER	read-only	This entry indicates the total number of physical IO slots in the chassis, (not all slots hardware should be occupied and active) .
INT chasTotalNoOfPsSlt	1.3.6.1.4.1.164.3.1.1.4	INTEGER	read-only	This entry indicates the number of physical Power Supply slots in the chassis.
INT chasTotalNoOfSlt	1.3.6.1.4.1.164.3.1.1.2	INTEGER	read-only	This entry indicates the number of physical slots in the chassis.
STR chasVersion	1.3.6.1.4.1.164.3.1.1.1	DisplayString	read-only	An ASCII string for description and display of the agent chassis version.
chasWanGen	1.3.6.1.4.1.164.3.1.1
cmprAgnGen	1.3.6.1.4.1.164.3.1.2.3
INT cmprCnfgIdx	1.3.6.1.4.1.164.3.3.4.1.1.2	INTEGER	read-only	This object indicates the configuration number the Compressed information relates to.
cmprEntry	1.3.6.1.4.1.164.3.3.4.1.1		not-accessible
cmprMdlGen	1.3.6.1.4.1.164.3.1.3.3
OCT cmprObj	1.3.6.1.4.1.164.3.3.4.1.1.6	OCTET STRING	read-write	This object is the compressed information itself, according to a predefined format, both agent and NMS agreed about.
cmprPrtGen	1.3.6.1.4.1.164.3.1.4.3
INT cmprPrtIdx	1.3.6.1.4.1.164.3.3.4.1.1.5	INTEGER	read-only	This object indicates a unique identifier of the port, the compressed information relates to. For DXC - according to the order in the card of cmprSltIdx: - first two digits will be: (IO slot number+10) - last one/two digits will be the port number within the card in odd or even numbers, as follows: * For the outside/external ports, in odd numbers: port1 = 1 port2 = 3 port3 = 5 etc... Example: port2 of IO slot 11 will be: 213 . * The inside/internal ports, in even numbers: port1 = 2 port2 = 4 port3 = 6 etc... Example: port2 of IO slot 11 will be: 214 . For FCD: see product's specification. If the port number is irrelevant to this parameter (if it is a system/card level alarm) the value will be 9999.
INT cmprSltIdx	1.3.6.1.4.1.164.3.3.4.1.1.4	INTEGER	read-only	This attribute indicates a unique number of the slot position where the card is inserted. When the unit is stand-alone or this object is not applicable, 255 will be used.
cmprTable	1.3.6.1.4.1.164.3.3.4.1		not-accessible
INT cmprTypeIdx	1.3.6.1.4.1.164.3.3.4.1.1.1	INTEGER	read-only	This object indicates the Type of the Compressed data referred (which table, which level, etc). The type is a code according to a convention between agent and NMS.
INT cmprVersion	1.3.6.1.4.1.164.3.3.4.1.1.3	INTEGER	read-only	This object indicates the version of the internal format of the Compressed data (the version of the convention used).
cnfgAgnGen	1.3.6.1.4.1.164.3.1.2.2
NTF cnfgFlipTrap	1.3.6.1.4.1.164.3.2.0.3			This trap is sent upon change of the active Configuration DB. Attached, is the new active Configuration no.
cnfgMdlGen	1.3.6.1.4.1.164.3.1.3.2
cnfgMdlMux	1.3.6.1.4.1.164.3.2.2.1
cnfgPrtGen	1.3.6.1.4.1.164.3.1.4.2
cnfgPrtMux	1.3.6.1.4.1.164.3.2.3.2
NTF cnfgUpdateTrap	1.3.6.1.4.1.164.3.3.0.6			This trap is sent upon change of the active Configuration DB.
dacsMux	1.3.6.1.4.1.164.3.3
NTF dacsMuxAlarmsTrap	1.3.6.1.4.1.164.3.3.0.2			This trap is sent when an alarm occurs.
diverseIfWanGen	1.3.6.1.4.1.164.3.1.6
INT ethBridgingMode	1.3.6.1.4.1.164.3.1.6.1.1.1.3	INTEGER	read-write	This object indicates the bridging mode of the Ethernet interface.
ethIf	1.3.6.1.4.1.164.3.1.6.1
ethIfEntry	1.3.6.1.4.1.164.3.1.6.1.1.1		not-accessible
INT ethIfIdx	1.3.6.1.4.1.164.3.1.6.1.1.1.1	INTEGER	read-only	A unique index of the ethernet interface/port.
ethIfTable	1.3.6.1.4.1.164.3.1.6.1.1		not-accessible
INT ethMode	1.3.6.1.4.1.164.3.1.6.1.1.1.2	INTEGER	read-write	This object indicates the Ethernet mode of operation.
STR fileName	1.3.6.1.4.1.164.6.2.12.2	DisplayString	read-write	The name of the file to be loaded. For protection, read returns NULL.
STR fileNameWithinProduct	1.3.6.1.4.1.164.6.2.12.9	DisplayString	read-write	The file name used by the product within the product file system.
IP fileServerIP	1.3.6.1.4.1.164.6.2.12.1	IpAddress	read-write	The IP address of the server from which the file is loaded
INT fileTransCmd	1.3.6.1.4.1.164.6.2.12.3	INTEGER	read-write	The command to be executed on fileName at fileServerIP.
fileTransfer	1.3.6.1.4.1.164.6.2.12
OCT fileTransferToSubSystems	1.3.6.1.4.1.164.6.2.12.8	OCTET STRING	read-write	This object represents the sub-systems the fileTransCmd refers to. It should be used when a system is divided to sub-systems and each sub-system (or part of them) can have a different SW/Configuration. Each bit of this object will represent one of the sub-systems. Bit='1' - APPLY to respective sub-system Bit='0' - DO NOT APPLY to respective sub-system For the meaning of each bit, see product's specification. User will select the sub-systems envolved by filling-in the bits that represent these sub-systems. In this case, the file represented by 'fileName' will include several parts, each representing one of the sub-systems. The agent will refer only to the part/s indicated by this object. 0 Octet Strings = not applicable DEFVAL = 0h for the products that support this object.
NTF flipDbChangeTrap	1.3.6.1.4.1.164.3.2.0.4			This trap is sent upon change of the active Flip tables (Flip DB).
genDacsMux	1.3.6.1.4.1.164.3.3.4
linkSelectorCnfgEntry	1.3.6.1.4.1.164.3.2.3.2.17.2.1		not-accessible
INT linkSelectorCnfgIdx	1.3.6.1.4.1.164.3.2.3.2.17.2.1.1	INTEGER	read-only	This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.
linkSelectorCnfgTable	1.3.6.1.4.1.164.3.2.3.2.17.2		not-accessible	The write operation into the Table Objects is valid only to the TmpCnfg entry.
INT linkSelectorMaxIdleTime	1.3.6.1.4.1.164.3.2.3.2.17.2.1.4	INTEGER	read-write	Move to higher prioritized connected link after this period of seconds of silence on the current link. 0=move immediately to higher prioritized connected link. UNIT is seconds.
INT linkSelectorMinBUSession	1.3.6.1.4.1.164.3.2.3.2.17.2.1.7	INTEGER	read-write	Minimum duration of a backup session before returning to Main Link. Relevant in Backup Mode and when Revert is auto(2). Value 255 is for NEVER which means never return to Main Link. UNIT is minutes.
INT linkSelectorMode	1.3.6.1.4.1.164.3.2.3.2.17.2.1.5	INTEGER	read-write	If the link selector is in mode: backup(2)=then the link with the lower priority will be used in case of failure of the higher priority link, bod(3)=bandwidth on demand or dynamic bandwidth allocation means that links with lower priority will be used whenever additional bandwidth is required.
linkSelectorPLinkEntry	1.3.6.1.4.1.164.3.2.3.2.17.3.1		not-accessible
linkSelectorPLinkTable	1.3.6.1.4.1.164.3.2.3.2.17.3		not-accessible	The write operation into the Table Objects is valid only to the TmpCnfg entry.
INT linkSelectorPrtIdx	1.3.6.1.4.1.164.3.2.3.2.17.2.1.3	INTEGER	read-only	This attribute indicates a unique port number. This port number should be internal port number: higher or equal to linkSeL1(201).
INT linkSelectorRevert	1.3.6.1.4.1.164.3.2.3.2.17.2.1.6	INTEGER	read-write	If the link selector is in mode backup: auto(2)=return automatically to Main link when it is OK. manual(3)=stays connected to backup link.
INT linkSelectorSltIdx	1.3.6.1.4.1.164.3.2.3.2.17.2.1.2	INTEGER	read-only	Slot Index
mapLinkEntry	1.3.6.1.4.1.164.3.3.4.2.1		not-accessible
INT mapLinkId	1.3.6.1.4.1.164.3.1.5.1.1.1	INTEGER	read-only	A unique identifier of the link
INT mapLinkIdx	1.3.6.1.4.1.164.3.3.4.2.1.1	INTEGER	read-only	A unique identifier of the link
INT mapLinkPortIdx	1.3.6.1.4.1.164.3.3.4.2.1.3	INTEGER	read-write	This attribute indicates a unique port number. The valid port number depends on the IO slot no., the installed card type and the port type: outside, inside, SP. In the DXC : - first two digits will be: (IO slot number+10) - last one/two digits will be the port number within the card in odd or even numbers, as follows: * For the outside/external ports, in odd numbers: port1 = 1 port2 = 3 port3 = 5 etc... Example: port2 of IO slot 11 will be: 213 . * The inside/internal ports, in even numbers: port1 = 2 port2 = 4 port3 = 6 etc... Example: port2 of IO slot 11 will be: 214 .
INT mapLinkPrtIdx	1.3.6.1.4.1.164.3.1.5.1.1.3	INTEGER	read-write	This attribute indicates a unique port number.
INT mapLinkSlotIdx	1.3.6.1.4.1.164.3.3.4.2.1.2	INTEGER	read-write	This attribute indicates a unique slot position where the module is inserted.
INT mapLinkSltIdx	1.3.6.1.4.1.164.3.1.5.1.1.2	INTEGER	read-write	This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries clA(3), io6(10)..io12(16) are not valid.
INT mapLinkState	1.3.6.1.4.1.164.3.3.4.2.1.4	INTEGER	read-only	This attribute indicates the status of the link between the two muxes
INT mapLinkStatus	1.3.6.1.4.1.164.3.1.5.1.1.4	INTEGER	read-only	This attribute indicates the status of the link between the two muxes
mapLinkTable	1.3.6.1.4.1.164.3.3.4.2		not-accessible
mapWanGen	1.3.6.1.4.1.164.3.1.5
INT mdlAlarmInvert	1.3.6.1.4.1.164.3.3.2.1.3.1.1.6	INTEGER	read-only	Alarm Invert is : on/off.
INT mdlAlarmMask	1.3.6.1.4.1.164.3.3.2.1.3.1.1.5	INTEGER	read-only	Alarm Mask is : on/off.
INT mdlAlarmsCmprAlarmIdx	1.3.6.1.4.1.164.3.1.3.3.2.1.3	INTEGER	read-only	A unique number to identify an entry in the alarm status table of the agent.
INT mdlAlarmsCmprAlarmSlot	1.3.6.1.4.1.164.3.1.3.3.2.1.2	INTEGER	read-only	This attribute indicates the desired slot position. In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io(16) are not valid.
mdlAlarmsCmprEntry	1.3.6.1.4.1.164.3.1.3.3.2.1		not-accessible
OCT mdlAlarmsCmprObj	1.3.6.1.4.1.164.3.1.3.3.2.1.4	OCTET STRING	read-write	This attribute is the compressed information itself.
mdlAlarmsCmprTable	1.3.6.1.4.1.164.3.1.3.3.2		not-accessible
INT mdlAlarmsCmprVersion	1.3.6.1.4.1.164.3.1.3.3.2.1.1	INTEGER	read-only	This attribute indicates the version of the internal format of the Compressed data
mdlAlr	1.3.6.1.4.1.164.3.3.2.1.3
INT mdlAlrCode	1.3.6.1.4.1.164.3.3.2.1.3.1.1.3	INTEGER	read-only	This object indicates a code related to a specific alarm description. The list of codes and their related descriptions will be sent to NMS request (for display purpose) by alrGenTable.
mdlAlrEntry	1.3.6.1.4.1.164.3.3.2.1.3.1.1		not-accessible
INT mdlAlrIdx	1.3.6.1.4.1.164.3.3.2.1.3.1.1.1	INTEGER	read-only	A unique number to identify an entry in the alarm status table. Users should use the get next function to read this table because the indexes are not consecutive
OCT mdlAlrMask	1.3.6.1.4.1.164.3.3.2.1.3.2.1.2	OCTET STRING	read-write	This object is a mask that indicates which card level alarms are masked. The masked alarms (their bit is set to '1') are neither sent to the manager, nor taken into account for alarm status and LEDs. Bit no. = Alarm code The bits that do not belong to the card level will be 0. This object is applicable only when mdlSAlrMaskAll=off (otherwise all card alarms are masked). Example: When Alarm having the code 8 is masked, the value of this object will be 100 (hex).
mdlAlrMaskEntry	1.3.6.1.4.1.164.3.3.2.1.3.2.1		not-accessible
INT mdlAlrMaskSltIdx	1.3.6.1.4.1.164.3.3.2.1.3.2.1.1	INTEGER	read-only	This attribute indicates the desired slot position. The Kilomux should use enumerated values starting with kmx.
mdlAlrMaskTable	1.3.6.1.4.1.164.3.3.2.1.3.2		not-accessible	The list of card masked alarms.
INT mdlAlrSltIdx	1.3.6.1.4.1.164.3.3.2.1.3.1.1.2	INTEGER	read-only	This attribute indicates the desired slot position. The Kilomux should use enumerated values starting with kmx.
INT mdlAlrState	1.3.6.1.4.1.164.3.3.2.1.3.1.1.4	INTEGER	read-only	This object indicates the card alarm state.
mdlAlrTable	1.3.6.1.4.1.164.3.3.2.1.3.1		not-accessible	The list of card alarms.
INT mdlCCnfgIdx	1.3.6.1.4.1.164.3.1.3.2.1.1.1	INTEGER	read-only	This attribute indicates the Idx of the Cnfg(1..100) being referred. Value 255 specifies the TmpCnfg
INT mdlCConfigIdx	1.3.6.1.4.1.164.3.3.2.1.2.1.1	INTEGER	read-only	This object indicates the Configuration number (1..255) referred. Value of 255 specifies the TmpCnfg (Scratch).
mdlCEntry	1.3.6.1.4.1.164.3.3.2.1.2.1		not-accessible
mdlCl	1.3.6.1.4.1.164.3.3.2.2
mdlClEntry	1.3.6.1.4.1.164.3.3.2.2.1.1		not-accessible
INT mdlClIdx	1.3.6.1.4.1.164.3.3.2.2.1.1.1	INTEGER	read-only	This object indicates the Cl slot referred.
STR mdlClLastFlipCause	1.3.6.1.4.1.164.3.3.2.2.1.1.5	DisplayString	read-only	The cause of last flip.
STR mdlClLastFlipDate	1.3.6.1.4.1.164.3.3.2.2.1.1.3	DisplayString	read-only	Date when last flip occured. The format would be as specified by the sysSDateFormat.
STR mdlClLastFlipTime	1.3.6.1.4.1.164.3.3.2.2.1.1.4	DisplayString	read-only	Time when last flip occured.
INT mdlClSwchStatus	1.3.6.1.4.1.164.3.3.2.2.1.1.2	INTEGER	read-only	This object indicates the status of the switches on the referred DCL card. Each switch is represented by a bit. The status is a sum of 2n, according to the bits. There are 4 switches: bit 0 SP-PAR (LSB) '1' - Default parameters bit 1 PSWRD '1' - Password=default '0' - Password=user selected bit 2 DB-INIT '1' - DB initiated with default '0' - DB initiated with NVRAM contents bit 3 PC-SP (MSB) '1' - Management by terminal only '0' - Management by NMS Example: If SP-PAR and PSWRD bits are set ('1'), the value will be 3 (21 + 2**0). When the status of the switches is unknown, the value of this object will be 255.
mdlClTable	1.3.6.1.4.1.164.3.3.2.2.1		not-accessible
INT mdlCmprCnfgIdx	1.3.6.1.4.1.164.3.1.3.3.1.1.2	INTEGER	read-only	This attribute indicates the configuration to which the Compressed information is related.
mdlCmprEntry	1.3.6.1.4.1.164.3.1.3.3.1.1		not-accessible
OCT mdlCmprObj	1.3.6.1.4.1.164.3.1.3.3.1.1.5	OCTET STRING	read-write	This attribute is the compressed information itself.
INT mdlCmprSltIdx	1.3.6.1.4.1.164.3.1.3.3.1.1.4	INTEGER	read-only	This attribute indicates a unique number of the slot position where the card is inserted. In the ?004 Unit the entries psB(2),clB(4),io6(10)..io(16) are not valid.
mdlCmprTable	1.3.6.1.4.1.164.3.1.3.3.1		not-accessible
INT mdlCmprTypIdx	1.3.6.1.4.1.164.3.1.3.3.1.1.1	INTEGER	read-only	This attribute indicates the Type of the Compressed being referred.
INT mdlCmprVersion	1.3.6.1.4.1.164.3.1.3.3.1.1.3	INTEGER	read-only	This attribute indicates the version of the internal format of the Compressed data
INT mdlCNoOfExternPrt	1.3.6.1.4.1.164.3.1.3.2.1.1.4	INTEGER	read-only	Number of external ports in the programmed card of the specific slot position
INT mdlCNoOfExtPrt	1.3.6.1.4.1.164.3.3.2.1.2.1.4	INTEGER	read-only	Number of external ports in the programmed module of the specific slot position
INT mdlCNoOfInternPrt	1.3.6.1.4.1.164.3.1.3.2.1.1.5	INTEGER	read-only	Number of internal ports in the programmed card of the specific slot position.
INT mdlCNoOfIntPrt	1.3.6.1.4.1.164.3.3.2.1.2.1.5	INTEGER	read-only	Number of internal ports in the programmed module of the specific slot position.
NTF mdlConnectTrap	1.3.6.1.4.1.164.3.3.0.3			This trap is sent when a card is removed.
INT mdlCPrgCardType	1.3.6.1.4.1.164.3.1.3.2.1.1.3	INTEGER	read-write	This attribute indicates the type of card assigned to the specific slot in the common configuration. This object is identical in all the configurations (1..100). Only the TmpCnf(255) may have different value. The write operation is valid only to the TmpCnfg entry.
mdlCPrgEntry	1.3.6.1.4.1.164.3.1.3.2.1.1		not-accessible
mdlCPrgTable	1.3.6.1.4.1.164.3.1.3.2.1		not-accessible
INT mdlCProgCardType	1.3.6.1.4.1.164.3.3.2.1.2.1.3	INTEGER	read-write	This object indicates the card type assigned to the specific slot in the common configuration. This object is identical for all the configurations (1..255). Only the TmpCnf(255) might have a different value. The write operation is valid only for the TmpCnfg entry.
INT mdlCSlotIdx	1.3.6.1.4.1.164.3.3.2.1.2.1.2	INTEGER	read-only	This object indicates a unique number of the slot position in which the module is inserted. The Kilomux should use enumerated values starting with kmx.
INT mdlCSltIdx	1.3.6.1.4.1.164.3.1.3.2.1.1.2	INTEGER	read-only	This attribute indicates a unique number of the slot position where the card is inserted. In the ?004 Unit the entries psB(2),clB(4),io6(10)..io(16) are not valid.
mdlCTable	1.3.6.1.4.1.164.3.3.2.1.2		not-accessible
mdlDacsMux	1.3.6.1.4.1.164.3.3.2
mdlGen	1.3.6.1.4.1.164.3.3.2.1
mdlMux	1.3.6.1.4.1.164.3.2.2
INT mdlPbxFraCnfgIdx	1.3.6.1.4.1.164.3.2.2.1.1.1.1.1	INTEGER	read-only	This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.
INT mdlPbxFraEnhEcho	1.3.6.1.4.1.164.3.2.2.1.1.1.1.3	INTEGER	read-write	Refers to external ports of an analogue module and to the internal ports of the other mvc4 types of modules. ms16(3) means that the four voice ports have enhanced echo of 16ms. ms32(4) means that the two first ports have enhanced echo of 32 ms while the last two ports have no enhanced echo.
INT mdlPbxFraFramerSlot	1.3.6.1.4.1.164.3.2.2.1.1.1.1.8	INTEGER	read-write	Slot where is sitting the Framer.
mdlPbxFramerCnfg	1.3.6.1.4.1.164.3.2.2.1.1
mdlPbxFramerCnfgEntry	1.3.6.1.4.1.164.3.2.2.1.1.1.1		not-accessible
mdlPbxFramerCnfgTable	1.3.6.1.4.1.164.3.2.2.1.1.1		not-accessible	This table contains parameters relevant to a module belonging to a digital voice system, except mdlPbxFraEnhEcho which is relevant also for analog cards.
INT mdlPbxFraSignaling	1.3.6.1.4.1.164.3.2.2.1.1.1.1.9	INTEGER	read-write	Signaling - describes the way the signaling ABCD bits pass from the local extension to the remote extension and vice-versa. endToEnd = the signaling ABCD bits pass without change from local to remote extension. localTermination = the signaling ABCD bits received from the local extension are translated to different ON Hook/OFF Hook bit values and then passed to remote extension. This is relevant when the Local and Remote ON Hook/OFF Hook values are different.
OCT mdlPbxFraSignalMask	1.3.6.1.4.1.164.3.2.2.1.1.1.1.7	OCTET STRING	read-write	In the case of mdlPbxFraSignalMode = userDefined(5), this field defines the 'don't care' A,B,C Bits. D bit is supplied for future versions. Bit 1 = Bit A ON Hook - Local Bit 2 = Bit B ON Hook - Local Bit 3 = Bit C ON Hook - Local Bit 4 = Bit D ON Hook - Local Bit 5 = Bit A OFF Hook - Local Bit 6 = Bit B OFF Hook - Local Bit 7 = Bit C OFF Hook - Local Bit 8 = Bit D OFF Hook - Local Bit 9 = Bit A ON Hook - Remote Bit 10 = Bit B ON Hook - Remote Bit 11 = Bit C ON Hook - Remote Bit 12 = Bit D ON Hook - Remote Bit 13 = Bit A OFF Hook - Remote Bit 14 = Bit B OFF Hook - Remote Bit 15 = Bit C OFF Hook - Remote Bit 16 = Bit D OFF Hook - Remote.
INT mdlPbxFraSignalMode	1.3.6.1.4.1.164.3.2.2.1.1.1.1.5	INTEGER	read-write	Refers to the signaling mode of the Framer module. tieTrunk(2), tieInvert(3), casTrans(4) are standard coding of the signaling protocol. casTrans(4) is Channel Associated Signaling (the signaling is within the channels time slot). ccsTrans(6) is Common Channel Signaling (the signaling is not within the channels time slot). userDefined(5) allows the user to define the signaling protocol he wants. In this case, the next two MIB fields are relevant.
OCT mdlPbxFraSignalVector	1.3.6.1.4.1.164.3.2.2.1.1.1.1.6	OCTET STRING	read-write	In the case of mdlPbxFraSignalMode = userDefined(5), this field defines the A,B,C Bits. D bit is supplied for future versions. Bit 1 = Bit A ON Hook - Local Bit 2 = Bit B ON Hook - Local Bit 3 = Bit C ON Hook - Local Bit 4 = Bit D ON Hook - Local Bit 5 = Bit A OFF Hook - Local Bit 6 = Bit B OFF Hook - Local Bit 7 = Bit C OFF Hook - Local Bit 8 = Bit D OFF Hook - Local Bit 9 = Bit A ON Hook - Remote Bit 10 = Bit B ON Hook - Remote Bit 11 = Bit C ON Hook - Remote Bit 12 = Bit D ON Hook - Remote Bit 13 = Bit A OFF Hook - Remote Bit 14 = Bit B OFF Hook - Remote Bit 15 = Bit C OFF Hook - Remote Bit 16 = Bit D OFF Hook - Remote In conjunction with the Mask, mdlPbxFraSignalMask, it is possible to compute the signal mode.
INT mdlPbxFraSltIdx	1.3.6.1.4.1.164.3.2.2.1.1.1.1.2	INTEGER	read-only	The slot relevant to this module.
INT mdlPbxFraTSGroupAss	1.3.6.1.4.1.164.3.2.2.1.1.1.1.4	INTEGER	read-write	In case of T1 modules: group1=(1,2,3,4), ...., group6=(21,22,23,24) while in case of E1 modules: - If prtExPh1MlLineType=g732sE1 or g732sE1CRC: group1=(1,2,3,4),..,group4=(13,14,15,17), group5=(18,19,20,21),...,group7=(26,27,28,29) group8=(30,31). - If prtExPh1MlLineType=g732nE1 or g732nE1CRC: group1=(1,2,3,4),..,group4=(13,14,15,16), group5=(17,18,19,20),...,group7=(25,26,27,28) group8=(29,30,31).
mdlPs	1.3.6.1.4.1.164.3.3.2.3
mdlPsEntry	1.3.6.1.4.1.164.3.3.2.3.1.1		not-accessible
INT mdlPsIdx	1.3.6.1.4.1.164.3.3.2.3.1.1.1	INTEGER	read-only	This object indicates the PS card referred.
INT mdlPsStatus	1.3.6.1.4.1.164.3.3.2.3.1.1.2	INTEGER	read-only	This object indicates the status of the PS card.
mdlPsTable	1.3.6.1.4.1.164.3.3.2.3.1		not-accessible
INT mdlPsTestResult	1.3.6.1.4.1.164.3.3.2.3.1.1.3	INTEGER	read-only	This object indicates the result of the PS card test. ok (1) - the test passed successfully. f12V (2) - 12V FAIL was detected f5V (3) - 5V FAIL was detected.
INT mdlSActivity	1.3.6.1.4.1.164.3.3.2.1.1.1.9	INTEGER	read-only	notApplicable - when the slot is empty (no module) offline(1) - when the module is not active (redundant) online (2) - when the module is active .
INT mdlSAlarmStatus	1.3.6.1.4.1.164.3.3.2.1.1.1.5	INTEGER	read-only	Indicates the current alarm state only for card level. This object will be set to: - major (3): when there is at least one active (ON) major alarm . - minor (4): when there is no active major alarm, but there is at least one active minor alarm. - off(2): when there is no active (ON) major or minor alarms (since last clear operation).
INT mdlSAlarmStatusAll	1.3.6.1.4.1.164.3.3.2.1.1.1.6	INTEGER	read-only	Indicates the current card alarm state including the lower level: card, port. This object will be set to: - major (3): when there is at least one active (ON) major alarm . - minor (4): when there is no active major alarm, but there is at least one active minor alarm. - off(2): when there is no active (ON) major or minor alarms (since last clear operation).
INT mdlSAlrClearAllCmd	1.3.6.1.4.1.164.3.3.2.1.1.1.11	INTEGER	read-write	Setting this attribute to ON, will enforce a clear operation on card and port level alarms . Upon completion, the value will automatically change to off(2).
INT mdlSAlrClearCmd	1.3.6.1.4.1.164.3.3.2.1.1.1.10	INTEGER	read-write	Setting this attribute to ON, will enforce a clear operation on the card level alarms . Upon completion, the value will automatically change to off(2).
INT mdlSAlrCode	1.3.6.1.4.1.164.3.1.3.1.2.1.4	INTEGER	read-only	A code identifying the alarm of an entry in the alarm status table at card level.
STR mdlSAlrCodeDescription	1.3.6.1.4.1.164.3.1.3.1.2.1.3	DisplayString	read-only	This attribute is a full text description of the alarm . The alarm description includes the following information: alarm code, alarm text, alarm severity, Masked or Inverted flag and counter.
INT mdlSAlrCounter	1.3.6.1.4.1.164.3.1.3.1.2.1.7	INTEGER	read-only	A counter - how many times the alarm occured since last clear operation. ON and OFF Alarm will be counted separately.
mdlSAlrEntry	1.3.6.1.4.1.164.3.1.3.1.2.1		not-accessible
INT mdlSAlrIdx	1.3.6.1.4.1.164.3.1.3.1.2.1.1	INTEGER	read-only	A unique number to identify an entry in the alarm status table. Users should use the get next function to read this table because the indexes are not consecutive.
INT mdlSAlrInvert	1.3.6.1.4.1.164.3.1.3.1.2.1.9	INTEGER	read-only	Alarm invert : on/off.
INT mdlSAlrMask	1.3.6.1.4.1.164.3.1.3.1.2.1.8	INTEGER	read-only	Alarm mask : on/off.
INT mdlSAlrMaskAll	1.3.6.1.4.1.164.3.3.2.1.1.1.12	INTEGER	read-write	on(3) - will cause masking of all the card level alarms. These alarms will not be sent to NMS and will not be taken into account for Alarms Status. off(2) - will unmask all card level alarms except those masked via the mdlAlrMaskTable.
INT mdlSAlrSeverity	1.3.6.1.4.1.164.3.1.3.1.2.1.5	INTEGER	read-only	The severity of the alarm.
INT mdlSAlrSltIdx	1.3.6.1.4.1.164.3.1.3.1.2.1.2	INTEGER	read-only	This attribute indicates the desired slot position. In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io12(16) are not valid.
INT mdlSAlrState	1.3.6.1.4.1.164.3.1.3.1.2.1.6	INTEGER	read-only	State of the alarm.
INT mdlSAlrStatus	1.3.6.1.4.1.164.3.1.3.1.1.1.5	INTEGER	read-only	Indicates the alarm state at module level, i.e. lower level (port alarms) status is not included. This attribute will be set to: critical(7) - when there is at least one active (state ON) critical alarm, otherwise it will be set to major(5) - when there is at least one active (state ON) major alarm, otherwise it will be set to minor(4) - if there is at least one active (state ON) minor alarm, otherwise it will be set to warning(6) - if there is at least one active (state ON) warning alarm, otherwise it will be set to event(3) - if there was at least one alarm event (including state on,off events) since the last clear operation.
INT mdlSAlrStatusAll	1.3.6.1.4.1.164.3.1.3.1.1.1.6	INTEGER	read-only	Indicates the alarm state in the module-all level, i.e. lower level (port alarms) included. This attribute will be set to: critical(7) - when there is at least one active (state ON) critical alarm, otherwise it will be set to major(5) - when there is at least one active (state ON) major alarm, otherwise it will be set to minor(4) - if there is at least one active (state ON) minor alarm, otherwise it will be set to warning(6) - if there is at least one active (state ON) warning alarm, otherwise it will be set to event(3) - if there was at least one alarm event (including state on,off events) since the last clear operation.
mdlSAlrTable	1.3.6.1.4.1.164.3.1.3.1.2		not-accessible	The list of card agent alarms ; includes also an alarm indicating existence of alarms on its ports if there are any.
INT mdlSCardType	1.3.6.1.4.1.164.3.3.2.1.1.1.2	INTEGER	read-only	This attribute indicates the type of the card installed in the specific slot position. Only PS's are possible in the PS slots. Only CL's are possible in the CL slots. Only IO modules are possible in the IO slots. Kmux card type start with the letter k.
INT mdlSClearAllAlrCmd	1.3.6.1.4.1.164.3.1.3.1.1.1.11	INTEGER	read-write	Setting this command to ON, enforces a clear of all the alarms in the given slot, including all its ports alarms. The clear operation will not be applied for masked/inverted alarms.
INT mdlSClearAlrCmd	1.3.6.1.4.1.164.3.1.3.1.1.1.10	INTEGER	read-write	Setting this command to ON, enforces a clear of all the alarms in the given slot, excluding alarms of port level. The clear operation will not be applied for masked/inverted alarms.
INT mdlSCmd	1.3.6.1.4.1.164.3.3.2.1.1.1.13	INTEGER	read-write	General object for any special command at card level. 0=NotApplicable, for cards that don't support this object. For KML.10(ISDN) card of KM-2100, the object will indicate Manual Call Command in Switch mode. It is applicable only when for KML.10, prtIsdnSwitchMode=manual. KML.10 valid values: '1' = noOp, will be used by agents that does not support this feature or object '2' = off, Set call command mode to disconnect state. Disconnects the call. '3' = on, Set call command mode to connect state. Connects the call.
mdlSEntry	1.3.6.1.4.1.164.3.3.2.1.1.1		not-accessible
INT mdlSHwStatus	1.3.6.1.4.1.164.3.3.2.1.1.1.8	INTEGER	read-only	This attribute will be fail(2) when a HW FAIL exists on this module (discovered by periodic self test); otherwise the value will be ok(3).
STR mdlSHwVer	1.3.6.1.4.1.164.3.3.2.1.1.1.3	DisplayString	read-only	This attribute indicates the Hardware version of the card installed in the specific slot position.
STR mdlSHwVersion	1.3.6.1.4.1.164.3.1.3.1.1.1.3	DisplayString	read-only	This attribute indicates the Hardware version of the installed card in the specific slot position.
INT mdlSInstCardType	1.3.6.1.4.1.164.3.1.3.1.1.1.2	INTEGER	read-only	This attribute indicates the type of card installed in the specific slot position. Only PS cards are possible in the PS slots. Only CL cards are possible in the CL slots. Only IO cards are possible in the IO slots.
mdlSInstEntry	1.3.6.1.4.1.164.3.1.3.1.1.1		not-accessible
INT mdlSInstSltIdx	1.3.6.1.4.1.164.3.1.3.1.1.1.1	INTEGER	read-only	A unique number to identify a slot position in the mux. In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io(16) are not valid.
mdlSInstTable	1.3.6.1.4.1.164.3.1.3.1.1		not-accessible
INT mdlSMaskedAlrStat	1.3.6.1.4.1.164.3.1.3.1.1.1.7	INTEGER	read-only	Indicates the alarm state at module level, [i.e. lower level (port alarms) status is not included],including Masked alarms. This attribute will be set to: critical(7) - when there is at least one active (state ON) critical alarm, otherwise it will be set to major(5) - when there is at least one active (state ON) major alarm, otherwise it will be set to minor(4) - if there is at least one active (state ON) minor alarm, otherwise it will be set to warning(6) - if there is at least one active (state ON) warning alarm, otherwise it will be set to event(3) - if there was at least one alarm event (including state on,off events) since the last clear operation.
INT mdlSMaskedAlrStatAll	1.3.6.1.4.1.164.3.1.3.1.1.1.8	INTEGER	read-only	Indicates the alarm state in the module-all level, i.e. lower level (port alarms) included, including Masked alarms. This attribute will be set to: critical(7) - when there is at least one active (state ON) critical alarm, otherwise it will be set to major(5) - when there is at least one active (state ON) major alarm, otherwise it will be set to minor(4) - if there is at least one active (state ON) minor alarm, otherwise it will be set to warning(6) - if there is at least one active (state ON) warning alarm, otherwise it will be set to event(3) - if there was at least one alarm event (including state on,off events) since the last clear operation.
INT mdlSSltIdx	1.3.6.1.4.1.164.3.3.2.1.1.1.1	INTEGER	read-only	A unique number to identify a slot position in the DACS. The Kilomux should use enumerated values starting with kmx.
STR mdlSSwVer	1.3.6.1.4.1.164.3.3.2.1.1.1.4	DisplayString	read-only	This attribute indicates the Software version of the card installed in the specific slot position.
STR mdlSSwVersion	1.3.6.1.4.1.164.3.1.3.1.1.1.4	DisplayString	read-only	This attribute indicates the Software version of the installed card in the specific slot position.
mdlSTable	1.3.6.1.4.1.164.3.3.2.1.1		not-accessible
INT mdlSTestStatus	1.3.6.1.4.1.164.3.3.2.1.1.1.7	INTEGER	read-only	This attribute will be on(3) when there is at least one test running on a port of the module; otherwise the value will be off(2).
INT mdlSTstStatusAll	1.3.6.1.4.1.164.3.1.3.1.1.1.9	INTEGER	read-only	This attribute will be set to on(3) when there is at least one test in progress on a channel of the card, otherwise the value will be off(2).
mdlWanGen	1.3.6.1.4.1.164.3.1.3
mngEntry	1.3.6.1.4.1.164.6.2.7.1		not-accessible
INT mngID	1.3.6.1.4.1.164.6.2.7.1.1	INTEGER	read-only	This value indicates an index of a specific IP address
IP mngIP	1.3.6.1.4.1.164.6.2.7.1.2	IpAddress	read-write	This value indicates the destination address of the traps. IP 0.0.0.0 removes the entry.
IP mngIPMask	1.3.6.1.4.1.164.6.2.7.1.3	IpAddress	read-write	This value indicates the mask of the destination addresses of the traps.
mngTrapIpTable	1.3.6.1.4.1.164.6.2.7		not-accessible	This table indicates the destination address of the traps. Internally it will be limited to ten addresses.
INT mngTrapMask	1.3.6.1.4.1.164.6.2.7.1.4	INTEGER	read-write	The value of this attribute determines the type of traps the agent should mask and not send to this NMS. The value is differently determined for different products. There are mainly two methods: - an integer number, specifying the traps' severity. - a sum of 2**n, where n is a bit assigned to a certain masked trap group. User should consult the product specification, to find out the method employed.
muxHub	1.3.6.1.4.1.164.3.2
INT physicalConnector	1.3.6.1.4.1.164.6.2.15.1.1.2	INTEGER	read-only	The connector of the port/interface. other - none of the specified connectors none - no connector.
physicalConnectorEntry	1.3.6.1.4.1.164.6.2.15.1.1		not-accessible
physicalConnectorTable	1.3.6.1.4.1.164.6.2.15.1		not-accessible	This table includes the connector type of ports or interfaces.
INT pLinkCnfgIdx	1.3.6.1.4.1.164.3.2.3.2.17.3.1.1	INTEGER	read-only	This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.
INT pLinkIdx	1.3.6.1.4.1.164.3.2.3.2.17.3.1.4	INTEGER	read-only	This index is the row number.
INT pLinkPortNu	1.3.6.1.4.1.164.3.2.3.2.17.3.1.6	INTEGER	read-write	The port of the prioritized link. Value 100 is for noConnect.
INT pLinkPrioNu	1.3.6.1.4.1.164.3.2.3.2.17.3.1.7	INTEGER	read-write	The priority of the prioritized link. MIN=1...., MAX=8.
INT pLinkPrtIdx	1.3.6.1.4.1.164.3.2.3.2.17.3.1.3	INTEGER	read-only	This attribute indicates a unique port number. This port number should be the link selector number.
INT pLinkSlotNu	1.3.6.1.4.1.164.3.2.3.2.17.3.1.5	INTEGER	read-write	The slot of the prioritized link. For ISDN BRI ports of MX300/30, io1(5) = isdn1(5) and io2(6) = isdn2(6).
INT pLinkSltIdx	1.3.6.1.4.1.164.3.2.3.2.17.3.1.2	INTEGER	read-only	Slot Index
INT pLinkVRate	1.3.6.1.4.1.164.3.2.3.2.17.3.1.8	INTEGER	read-write	The rate to use with this link.
INT portIdx	1.3.6.1.4.1.164.6.2.15.1.1.1	INTEGER	read-only	This object is an index of the specific port or interface. For a port, the index will be as agreed between agent and application. For an interface, ifIndex may be used.
INT portOptWaveLength	1.3.6.1.4.1.164.6.2.15.1.1.3	INTEGER	read-only	Wave Length of an Optical interface/port in [nm] and specification if Laser or not. notApplicable - for non-optical ports.
INT prtAcmActiveState	1.3.6.1.4.1.164.3.2.3.2.20.1.1.5	INTEGER	read-write	This attribute indicates the Electric Active State of the port.
STR prtAcmAlrString	1.3.6.1.4.1.164.3.2.3.2.20.1.1.6	DisplayString	read-write	Alarm string selected by user for the Inbound ports. This object is applicable only for the Inbound Ports: ext-5..ext-12. For the Outbound Ports (ext-1..ext-4), the size of this string will be 0.
prtAcmCnfg	1.3.6.1.4.1.164.3.2.3.2.20
prtAcmCnfgEntry	1.3.6.1.4.1.164.3.2.3.2.20.1.1		not-accessible
INT prtAcmCnfgIdx	1.3.6.1.4.1.164.3.2.3.2.20.1.1.1	INTEGER	read-only	This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. The write operation is valid only to the TmpCnfg.
prtAcmCnfgTable	1.3.6.1.4.1.164.3.2.3.2.20.1		not-accessible	This is a table for ACM port parameters.
INT prtAcmConnect	1.3.6.1.4.1.164.3.2.3.2.20.1.1.4	INTEGER	read-write	This attribute indicates whether the port should be connected or not. Only a connected port can perform activity.
INT prtAcmPrtIdx	1.3.6.1.4.1.164.3.2.3.2.20.1.1.3	INTEGER	read-only	This attribute indicates a unique port number.
INT prtAcmSltIdx	1.3.6.1.4.1.164.3.2.3.2.20.1.1.2	INTEGER	read-only	This attribute indicates a unique slot position where the module is inserted.
INT prtAgendaBehaviourCnfgIdx	1.3.6.1.4.1.164.3.1.4.2.2.1.1.1	INTEGER	read-only	This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.
prtAgendaBehaviourEntry	1.3.6.1.4.1.164.3.1.4.2.2.1.1		not-accessible
INT prtAgendaBehaviourOnOff	1.3.6.1.4.1.164.3.1.4.2.2.1.1.4	INTEGER	read-write	Setting this command to on(3) enables the agenda function at module (3000) or port (300/30) level.
INT prtAgendaBehaviourPrtIdx	1.3.6.1.4.1.164.3.1.4.2.2.1.1.3	INTEGER	read-only	This parameter should be: - port number for MX300/30 - 100 = N/A for MX3000.
INT prtAgendaBehaviourSltIdx	1.3.6.1.4.1.164.3.1.4.2.2.1.1.2	INTEGER	read-only	This parameter should be: - slot number for MX3000 - 255 = N/A for MX300/30.
prtAgendaBehaviourTable	1.3.6.1.4.1.164.3.1.4.2.2.1		not-accessible	The write operation into the Table Objects is valid only to the TmpCnfg entry.
INT prtAlarmsCmprAlarmIdx	1.3.6.1.4.1.164.3.1.4.3.3.1.4	INTEGER	read-only	A unique number to identify an entry in the alarm status table of the agent.
INT prtAlarmsCmprAlarmPort	1.3.6.1.4.1.164.3.1.4.3.3.1.3	INTEGER	read-only	This attribute indicates a unique identifier of the port the alarm applies to. All the values are valid. No alarms exist for a non-physical port
INT prtAlarmsCmprAlarmSlot	1.3.6.1.4.1.164.3.1.4.3.3.1.2	INTEGER	read-only	This attribute indicates the desired slot position. In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io(16) are not valid. For Stand-alone units, notApplicable(255) will appear.
prtAlarmsCmprEntry	1.3.6.1.4.1.164.3.1.4.3.3.1		not-accessible
OCT prtAlarmsCmprObj	1.3.6.1.4.1.164.3.1.4.3.3.1.5	OCTET STRING	read-only	This attribute is the compressed information itself.
prtAlarmsCmprTable	1.3.6.1.4.1.164.3.1.4.3.3		not-accessible
INT prtAlarmsCmprVersion	1.3.6.1.4.1.164.3.1.4.3.3.1.1	INTEGER	read-only	This attribute indicates the version of the internal format of the Compressed data
prtAlr	1.3.6.1.4.1.164.3.3.3.1.4
OCT prtAlrMask	1.3.6.1.4.1.164.3.3.3.1.4.2.1.2	OCTET STRING	read-write	This object is a mask that indicates which port level alarms are masked. The masked alarms (their bit is set to '1') are neither sent to the manager, nor taken into account for alarm status and LEDs. Bit no. = Alarm code The bits that do not belong to the port level will be 0. This object is applicable only when prtGenAlrMaskAll=off (otherwise all port alarms are masked). Example: When Alarms having the codes 31 and 40 are masked, the value of this object will be 10080000000 (hex).
prtAlrMaskEntry	1.3.6.1.4.1.164.3.3.3.1.4.2.1		not-accessible
INT prtAlrMaskPrtIdx	1.3.6.1.4.1.164.3.3.3.1.4.2.1.1	INTEGER	read-only	This attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outside/external, inside/internal. In the Kilomux, the port index is calculated as follows: 100Slot+Ch. The external Ch numbers are 1..10, and the internal Ch numbers are 11..20. In the DXC : - first two digits will be: (IO slot number+10) - last one/two digits will be the port number within the card in odd or even numbers, as follows: For the outside/external ports, in odd numbers: port1 = 1 port2 = 3 port3 = 5 etc... Example: port2 of IO slot 11 will be: 213 . * The inside/internal ports, in even numbers: port1 = 2 port2 = 4 port3 = 6 etc... Example: port2 of IO slot 11 will be: 214 .
prtAlrMaskTable	1.3.6.1.4.1.164.3.3.3.1.4.2		not-accessible
INT prtBertClearCounters	1.3.6.1.4.1.164.3.3.3.1.5.1.10	INTEGER	read-write	Setting this object to ON, will enforce a clear operation of some BERT Counters. Upon completion, the value will automatically change to off(2).
INT prtBertCounter	1.3.6.1.4.1.164.6.2.15.4.1.1.3	INTEGER	read-only	This object indicates the number of BERT errors encountered during the BERT operation. It is valid only when BERT (Bit Error Rate Test) is active on the specific port. The Counter starts from zero (0) anytime BERT is initiated.
prtBertEntry	1.3.6.1.4.1.164.3.3.3.1.5.1		not-accessible
INT prtBertErrorBits	1.3.6.1.4.1.164.3.3.3.1.5.1.9	INTEGER	read-only	How many Error Bits were detected since BERT started to run.
INT prtBertESs	1.3.6.1.4.1.164.3.3.3.1.5.1.7	INTEGER	read-only	How many Errored Seconds were detected since BERT started to run. Counter for Kmux and MP.
INT prtBertInjectErrRateCmd	1.3.6.1.4.1.164.3.3.3.1.5.1.4	INTEGER	read-write	This object controls activation/deactivation of the Error Rate Injection during BERT.
INT prtBertInjectRate	1.3.6.1.4.1.164.3.3.3.1.5.1.3	INTEGER	read-write	This object indicates the error rate injection of the BERT. r10Emx = 10E-x This object is the same for all configurations. single - single error injection. notApplicable - when this object is not supported.
INT prtBertInjectSingleErrCmd	1.3.6.1.4.1.164.3.3.3.1.5.1.5	INTEGER	read-write	This object enables to initiate a Single Error Injection during BERT (on). Upon completion, the value will automatically change to off(2).
INT prtBertPattern	1.3.6.1.4.1.164.3.3.3.1.5.1.2	INTEGER	read-write	This object indicates the pattern of the BERT. p2Exxm1 = 2Exx-1. pxx = pattern xx. This object is the same for all configurations. notApplicable - when this object is not supported.

INT agnAlarmsCmprAlarmIdx

1.3.6.1.4.1.164.3.1.2.3.3.1.2

INTEGER

read-only

A unique number to identify an entry in the alarm status table of the agent.

agnAlarmsCmprEntry

1.3.6.1.4.1.164.3.1.2.3.3.1

not-accessible

OCT agnAlarmsCmprObj

1.3.6.1.4.1.164.3.1.2.3.3.1.3

OCTET STRING

read-only

This attribute is the compressed information itself.

agnAlarmsCmprTable

1.3.6.1.4.1.164.3.1.2.3.3

not-accessible

INT agnAlarmsCmprVersion

1.3.6.1.4.1.164.3.1.2.3.3.1.1

INTEGER

read-only

This attribute indicates the version of the internal format of the Compressed data

INT agnAlrBufCmprAlarmIdx

1.3.6.1.4.1.164.3.1.2.3.4.1.2

INTEGER

read-only

A unique number to identify an entry in the history alarms buffer of the agent.

agnAlrBufCmprEntry

1.3.6.1.4.1.164.3.1.2.3.4.1

not-accessible

OCT agnAlrBufCmprObj

1.3.6.1.4.1.164.3.1.2.3.4.1.3

OCTET STRING

read-only

This attribute is the compressed information itself.

agnAlrBufCmprTable

1.3.6.1.4.1.164.3.1.2.3.4

not-accessible

INT agnAlrBufCmprVersion

1.3.6.1.4.1.164.3.1.2.3.4.1.1

INTEGER

read-only

This attribute indicates the version of the internal format of the Compressed data

INT agnCAgendaCnfgIdx

1.3.6.1.4.1.164.3.1.2.5.1.1.1

INTEGER

read-only

Active or Temporary Agenda Table. Both configurations can be read but only the Temporary can be written to.

INT agnCAgendaDayCategory

1.3.6.1.4.1.164.3.1.2.5.1.1.3

INTEGER

read-write

The Category of the Day

INT agnCAgendaDayIdx

1.3.6.1.4.1.164.3.1.2.5.1.1.2

INTEGER

read-only

Day of week

agnCAgendaEntry

1.3.6.1.4.1.164.3.1.2.5.1.1

not-accessible

agnCAgendaTable

1.3.6.1.4.1.164.3.1.2.5.1

not-accessible

This table devides the week days into categories needed for DB flip consideration.

INT agnCClkCnfgIdx

1.3.6.1.4.1.164.3.1.2.2.4.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg(1..100) being accessed and Idx 255 relates to the TmpCnfg.

agnCClkSrcEntry

1.3.6.1.4.1.164.3.1.2.2.4.1

not-accessible

INT agnCClkSrcIdx

1.3.6.1.4.1.164.3.1.2.2.4.1.2

INTEGER

read-only

An index to the table. There are only two entries to this table. Index 1 points to the Master clock parameters and Index 2 points to the Fallback clock parameters

INT agnCClkSrcMode

1.3.6.1.4.1.164.3.1.2.2.4.1.3

INTEGER

read-write

The source of the nodal timing.

INT agnCClkSrcPrt

1.3.6.1.4.1.164.3.1.2.2.4.1.5

INTEGER

read-write

This entry is valid only when we are working in rxClk mode. For an invalid entry, the return value will be '7fff'h.

INT agnCClkSrcSlt

1.3.6.1.4.1.164.3.1.2.2.4.1.4

INTEGER

read-write

This entry is valid only when we are working in rxClk mode. For an invalid entry, the return value will be '7fff'h.

agnCClkSrcTable

1.3.6.1.4.1.164.3.1.2.2.4

not-accessible

All the entries of this table are identical (have the same value) for all the configurations (1..100) except the TmpCnfg. The write operation into the Table Objects is valid only for the TmpCnfg entry.

INT agnCDefaultCnfgIdxCmd

1.3.6.1.4.1.164.3.1.2.2.6

INTEGER

read-write

Setting this attribute will define the desired working configuration when no conditions of the Flip DB Table are fulfilled and no Net GO command was issued. This command will be accepted only if the Configuration number exists (agnSEntryIsValid=yes).

INT agnCDeleteCnfgIdxCmd

1.3.6.1.4.1.164.3.1.2.2.5

INTEGER

read-write

Setting this attribute will delete the requested DB from the NVRAM .

INT agnCFlipActive

1.3.6.1.4.1.164.3.1.2.5.3.1.3

INTEGER

read-write

Indicates if the entry is valid. In order to Add/Modify parameters of an entry this object should be Set to Yes. In order to delete an entry, this object should be Set to No.

INT agnCFlipCnfgIdx

1.3.6.1.4.1.164.3.1.2.5.3.1.1

INTEGER

read-only

Active or Temporary Flip Decisions Table. Both configurations can be read but only the Temporary can be written to.

INT agnCFlipDbNo

1.3.6.1.4.1.164.3.1.2.5.3.1.5

INTEGER

read-write

The ID of the required DB

INT agnCFlipDbSanityCheckCmd

1.3.6.1.4.1.164.3.1.2.5.4.1

INTEGER

read-write

Setting this attribute to on(3) will initiate the process of Sanity check on the Temp Flip Db and automatically be changed to off(2).

INT agnCFlipDiscardDe

1.3.6.1.4.1.164.3.1.2.5.3.1.6

INTEGER

read-write

Indicates whether the Mux should start discarding all DE. (MP3000 Only).

agnCFlipEntry

1.3.6.1.4.1.164.3.1.2.5.3.1

not-accessible

INT agnCFlipIdx

1.3.6.1.4.1.164.3.1.2.5.3.1.2

INTEGER

read-only

Entry number within the table

STR agnCFlipLogicalExp

1.3.6.1.4.1.164.3.1.2.5.3.1.4

DisplayString

read-write

A logical expression composed of events numbers (which were configured in the 'AgnCFlipNetEvantsTable') and logical operators ('|', '&', '!', '(', ')') between them. e.g - (1 & !2) | (121 & 230)

INT agnCFlipNetEventActive

1.3.6.1.4.1.164.3.1.2.5.2.1.3

INTEGER

read-write

Indicates if the entry is valid. In order to Add/Modify parameters of an entry, this object should be set to Yes. In order to delete an entry, this object should be Set to No.

INT agnCFlipNetEventDayType

1.3.6.1.4.1.164.3.1.2.5.2.1.10

INTEGER

read-write

The time event relates to all days defined in this category in the agnCAgendaTable. Applicable only for time event

STR agnCFlipNetEventEndTime

1.3.6.1.4.1.164.3.1.2.5.2.1.12

DisplayString

read-write

The time event will be deactivated at this time. The format is hh:mm.

INT agnCFlipNetEventIdx

1.3.6.1.4.1.164.3.1.2.5.2.1.2

INTEGER

read-only

Entry within the table

INT agnCFlipNetEventISD

1.3.6.1.4.1.164.3.1.2.5.2.1.8

INTEGER

read-write

The time in seconds since the Net Event was reported as ON until it is considered as ON. Not relevant for time events.

INT agnCFlipNetEventNo

1.3.6.1.4.1.164.3.1.2.5.2.1.5

INTEGER

read-write

The Net Event No. (Bit Index)

INT agnCFlipNetEventOSD

1.3.6.1.4.1.164.3.1.2.5.2.1.9

INTEGER

read-write

The time in seconds since the net event was reported as OFF until it is considered as OFF. Not relevant for time events.

INT agnCFlipNetEventPort

1.3.6.1.4.1.164.3.1.2.5.2.1.7

INTEGER

read-write

The port within the relevant slot

INT agnCFlipNetEventsCnfgIdx

1.3.6.1.4.1.164.3.1.2.5.2.1.1

INTEGER

read-only

Active or Temporary Net Events Table. Both configurations can be read but only the Temporary can be written to.

agnCFlipNetEventsEntry

1.3.6.1.4.1.164.3.1.2.5.2.1

not-accessible

INT agnCFlipNetEventSlot

1.3.6.1.4.1.164.3.1.2.5.2.1.6

INTEGER

read-write

The slot to which the net event relates . Not applicable for time event

agnCFlipNetEventsTable

1.3.6.1.4.1.164.3.1.2.5.2

not-accessible

This table holds the Net Events the MUX should trace

STR agnCFlipNetEventStartTime

1.3.6.1.4.1.164.3.1.2.5.2.1.11

DisplayString

read-write

The time event will be activated at this time. The format is hh:mm.

INT agnCFlipNetEventType

1.3.6.1.4.1.164.3.1.2.5.2.1.4

INTEGER

read-write

The Net Event type

agnCFlipTable

1.3.6.1.4.1.164.3.1.2.5.3

not-accessible

The DB Flip Decisions Table

CTR agnChangeCnt

1.3.6.1.4.1.164.6.2.4

Counter

read-only

The number of changes in system configuration that were reported to the manager since last cold start

INT agnCLoadCnfgIdxCmd

1.3.6.1.4.1.164.3.1.2.2.3

INTEGER

read-write

This attribute specifies the Id of the source Cnfg to be loaded into the TmpCnfg. Upon set operation the actual transfer will be initiated. The operation is valid only on Valid configurations (agnSEntryIsValid)

INT agnCmprCnfgIdx

1.3.6.1.4.1.164.3.1.2.3.1.1.2

INTEGER

read-only

This attribute indicates the configuration to which the Compressed information is related.

agnCmprEntry

1.3.6.1.4.1.164.3.1.2.3.1.1

not-accessible

OCT agnCmprObj

1.3.6.1.4.1.164.3.1.2.3.1.1.4

OCTET STRING

read-write

This attribute is the compressed information itself.

agnCmprTable

1.3.6.1.4.1.164.3.1.2.3.1

not-accessible

INT agnCmprTypIdx

1.3.6.1.4.1.164.3.1.2.3.1.1.1

INTEGER

read-only

This attribute indicates the Type of the Compressed being referred.

INT agnCmprVersion

1.3.6.1.4.1.164.3.1.2.3.1.1.3

INTEGER

read-only

This attribute indicates the version of the internal format of the Compressed data

INT agnCNetDelay

1.3.6.1.4.1.164.3.1.2.5.4.6

INTEGER

read-write

This attribute determines the period of time in seconds that takes for a message to be transferred over all the network. After a 'GO' command the MUX issues a delay of 'agnCNetDelay' before activating the appropriate DB. The delay will be applied only after performing agnCSaveFlipDbCmd.

INT agnCNetEventsBcast

1.3.6.1.4.1.164.3.1.2.5.4.7

INTEGER

read-write

This object determines if the Net Events will be Broadcasted to other Muxes of the Net or not. disabled - Net Events will NOT be Broadcasted enabled - Net Events will be Broadcasted. Default=disabled. The value will be applied only after performing agnCSaveFlipDbCmd.

INT agnCNetEventsBcastInterval

1.3.6.1.4.1.164.3.1.2.5.4.8

INTEGER

read-write

When agnCNetEventsBcast is enabled, this object determines the interval of time in seconds, between two consecutive Net Events transferred over the network. Default=40 sec. The interval will be applied only after performing agnCSaveFlipDbCmd.

INT agnCNetGoCmd

1.3.6.1.4.1.164.3.1.2.5.4.5

INTEGER

read-write

Setting this attribute to On will broadcast a 'GO' command to the network. When a Mux receives a 'GO' command it issues a delay for 'agnCNetDelay' seconds and then activates the DB which was pre-defined by one of the commands : 'agnCSaveNetCnfgIdxCmd' or 'agnCSaveNetFlipDbCmd'.

agnCnfgAlarm

1.3.6.1.4.1.164.3.1.2.2.8

INT agnCnfgAlrCode

1.3.6.1.4.1.164.3.1.2.2.8.2.1.1

INTEGER

read-only

The alarm code. The following attributes refer this code.

agnCnfgAlrEntry

1.3.6.1.4.1.164.3.1.2.2.8.2.1

not-accessible

INT agnCnfgAlrFilter

1.3.6.1.4.1.164.3.1.2.2.8.2.1.6

INTEGER

read-write

An attribute defining if Filter is desired for the alarm . no - no filter. yes - filter activate. This filter is activated within a window of time defined by agnCnfgAlrFilterWindow. Its purpose is to avoid frequent changes of an alarm between ON/OFF states.

INT agnCnfgAlrFilterReset

1.3.6.1.4.1.164.3.1.2.2.8.2.1.8

INTEGER

read-write

This is a bottom threshold causing the alarm that does not pass it, to be declared Reset (ON) at the end of the respective window of time. - For alarms defined by default as state alarms (minor,major) this value will be in [%]. - For alarms defined by default as events, this value will be an integer meaning how many times this event should appear at most, during the window, in order to be considered OFF. This value should be less than the one of agnCnfgAlrFilterSet. Agents that do not support Alarms Filter, will return 0.

INT agnCnfgAlrFilterSet

1.3.6.1.4.1.164.3.1.2.2.8.2.1.7

INTEGER

read-write

This is a top threshold causing the alarm that passes it, to be declared Set (ON) at the end of the respective window of time. - For alarms defined by default as state alarms (minor,major) this value will be in [%]. - For alarms defined by default as events, this value will be an integer meaning how many times this event should appear at least, during the window in order to be considered ON. The maximum valuewill be 255. This value should be greater than the one of agnCnfgAlrFilterReset. Agents that do not support Alarms Filter, will return 0.

INT agnCnfgAlrFilterWindow

1.3.6.1.4.1.164.3.1.2.2.8.1

INTEGER

read-write

Window of time, in minutes. During this Window, the alarms filter is performed. Same Window for all agent alarms that need filtering. Upon end of the Window, the state of the alarm is updated and a new Window starts. If no alarm needs filtering, this object's value will not be used.

INT agnCnfgAlrInvert

1.3.6.1.4.1.164.3.1.2.2.8.2.1.5

INTEGER

read-write

An attribute defining the desired Invert state of an alarm . no - not inverted. yes - inverted. For MP, it is not applicable for alarms that are currently OFF.

INT agnCnfgAlrMask

1.3.6.1.4.1.164.3.1.2.2.8.2.1.4

INTEGER

read-write

An attribute defining the desired Mask state of an alarm . no - unmask (this command is not saved in agent's common database) noAndSave - unmask ; this command is saved in agent's common database yes - mask (this command is not saved in agent's common database) yesAndSave - mask ; this command is saved in agent's common database. Commands that are not saved, will be lost upon power-up or selected card removal.

INT agnCnfgAlrPort

1.3.6.1.4.1.164.3.1.2.2.8.2.1.3

INTEGER

read-only

The alarm port. The following attributes apply for the alarm code,slot and port selected. 200 = all = the attributes apply to all ports of the selected slot. When selected Slot is 'all', only 'all' or 'notApplicable' are valid Port selections. notApplicable = the selected alarm is for system or card level. =255 for MP =100 for DXC - For MP, valid cards' ports are: exPrt1(1)..exPrt12(12) inPrt1(101)..inPrt48 (148) - For DXC, the port index will include the Slot, as for all DXC tables: [(IO Slot+10)&n] ; n=odd for external ports n=even for internal ports.

agnCnfgAlrReportEntry

1.3.6.1.4.1.164.3.1.2.2.8.3.1

not-accessible

agnCnfgAlrReportTable

1.3.6.1.4.1.164.3.1.2.2.8.3

not-accessible

This table enables the user to configure the desired Alarm Reports according to alarms severity.

INT agnCnfgAlrReportType

1.3.6.1.4.1.164.3.1.2.2.8.3.1.1

INTEGER

read-only

The alarm report type. trap - traps will be sent only for alarms having the selected On/Off severity or higher. buffer - only alarms having the selected On/Off severity and higher, will be reported to the buffer. relay - relay contact will be activated only for alarms having the selected On severity or higher. For products having 2 relays, this is the Minor Relay. alrLedOn/alrLedBlink - user should select a higher severity (ReportOn) for alrLedBlink than for alrLedOn (Blinking Led means a more severe alarm than steady ON Led). alrLedOn - MTCL-1 Alarm Led will be ON only when agnSAlrStatusAll equals the selected severity or higher, but lower severity than that selected for 'alrLedBlink'. For products having 2 LEDs, this is the Minor LED. alrLedBlink - MTCL-1 Alarm Led will Blink only when agnSAlrStatusAll equals the selected severity or higher. For products having 2 LEDs, this is the Major LED. relay2 - relay 2 contact will be activated only for alarms having the selected On severity or higher. This is the Major Relay.

INT agnCnfgAlrSlot

1.3.6.1.4.1.164.3.1.2.2.8.2.1.2

INTEGER

read-only

The alarm slot. The following attributes apply for the alarm code and slot selected. all = the attributes apply to all slots. notApplicable = the selected alarm is for system level.

INT agnCnfgAlrStartReportOff

1.3.6.1.4.1.164.3.1.2.2.8.3.1.3

INTEGER

read-write

This object specifies the severity from which alarms will be reported. Alarms having this severity or higher, will be reported. This object specifies the report severity only for alarms that turn to OFF state. notApplicable - for 'relay','alrLedOn','alrLedBlink', 'relay2' report types, in MP. noReport - no Report at all (for any severity).

INT agnCnfgAlrStartReportOn

1.3.6.1.4.1.164.3.1.2.2.8.3.1.2

INTEGER

read-write

This object specifies the severity from which alarms will be reported. Alarms having this severity or higher, will be reported. This object specifies the report severity only for alarms that turn to ON state. noReport - no Report at all (for any severity).

agnCnfgAlrTable

1.3.6.1.4.1.164.3.1.2.2.8.2

not-accessible

This table enables the user to set attributes to each alarm. Setting for a non-existing entry agnCnfgAlrMask, agnCnfgAlrInvert or agnCnfgAlrFilter to 'yes'(or yesAndSave for Mask) will add this new entry to the table. Setting for an existing entry agnCnfgAlrMask/ agnCnfgAlrInvert/agnCnfgAlrFilter (one or more) to 'no' (noAndSave for Mask) so that ALL these objects' values are 'no' , will delete this entry from the table. For agnCnfgAlrMask, only if [(last saved value=noAndSave) AND (new value is 'no' or 'noAndSave')] the object's value is considered 'no' for deleting the entry.

agnCnfgDataEntry

1.3.6.1.4.1.164.3.1.2.2.7.1

not-accessible

agnCnfgDataTable

1.3.6.1.4.1.164.3.1.2.2.7

not-accessible

This table contains data about the agent configurations. The table will support only data about valid configurations of the agent.

STR agnCnfgDesc

1.3.6.1.4.1.164.3.1.2.2.7.1.2

DisplayString

read-write

This object is a description of the Configuration, entered by user, to enhance Cnfg recognition.

INT agnCnfgIdx

1.3.6.1.4.1.164.3.1.2.2.7.1.1

INTEGER

read-only

This object indicates the Idx of the agent' Cnfg the following objects refer. 255=Temporary Cnfg (Set is done only to this configuration).

STR agnCnfgUpdDate

1.3.6.1.4.1.164.3.1.2.2.7.1.3

DisplayString

read-only

This object indicates the date when last update of this configuration was performed, as it is known by the agent using its own real-time clock. The format would be as specified by the agnSDateFormat. When update is performed, the agent should save the date.

IP agnCnfgUpdMnger

1.3.6.1.4.1.164.3.1.2.2.7.1.5

IpAddress

read-only

This object indicates the IP Address of the Manager who performed the last update of this configuration. When update is performed, the agent should save the IP Address of the Manager who commanded the update. That will enable a manager to know if he performed the last update, or another manager did.

STR agnCnfgUpdTime

1.3.6.1.4.1.164.3.1.2.2.7.1.4

DisplayString

read-only

This object indicates the time when last update of this configuration was performed, as it is known by the agent using its own real-time clock. When update is performed, the agent should save the time.

INT agnCOffsetCmd

1.3.6.1.4.1.164.3.1.2.2.9

INTEGER

read-write

An object defining special user request. notApplicable - is RO value for products that do not support this object. normal - nothing special u1 - user 1 - for all Voice cards, the DISPLAYED Tx and Rx Levels will have the following Offsets: - 2 Wires port: Tx Level: the base value (for 0dBm) = 0 Rx Level: the base value (for 0dBm) = -2 - 4 Wires port: Tx Level: the base value (for 0dBm) = -16 Rx Level: the base value (for 0dBm) = 7 The MIB and application DB will use the values without Offset.

OCT agnConfigMsg

1.3.6.1.4.1.164.6.2.6

OCTET STRING

read-only

Full configuration message coded in internal RAD application format. This entry describes agent's configuration. For MP-2200 R3, this object describes agent's support of the V5.1 feature: 1 octet ; bit 0 (LSB). '1' - V5.1 feature is supported '0' - V5.1 feature is not supported.

INT agnCSanityCheckCmd

1.3.6.1.4.1.164.3.1.2.2.1

INTEGER

read-write

Setting this attribute to on(3) will initiate the process of Sanity check on the TmpCnfg. Upon completion the value will automatically be changed to off(2).

INT agnCSaveCnfgIdxCmd

1.3.6.1.4.1.164.3.1.2.2.2

INTEGER

read-write

This attribute specifies the Id of the target RealCnfg to which the TmpCnfg should be transferred. Upon set command the MUX will initiate the Sanity-Check process first. If successful, the actual transfer will be performed. If warnings are detected, the user will have to perform the command again to confirm the operation. Setting this object a second time to the same value without performing any change in the database, will cause the result: agnSSanityCheckStatus = unknown

INT agnCSaveFlipDbCmd

1.3.6.1.4.1.164.3.1.2.5.4.2

INTEGER

read-write

Setting this attribute to on(3) will initiate the process of Sanity check on the Temp Flip Db and if it is OK, it will save the Flip Db in the NVRAM, activating the new Flip DB . If check detects errors, the save will not be performed. Afterwards, the object's value will change automatically to off(2).

INT agnCSaveNetCnfgIdxCmd

1.3.6.1.4.1.164.3.1.2.5.4.3

INTEGER

read-write

This attribute specifies the Id of the target NVRAM Cnfg to which the TmpCnfg should be transferred. Upon set command the MUX will initiate the Sanity-Check process first. If successful, the actual transfer will be performed. If warnings are detected, the user will have to perform the command again to confirm the operation. Setting this object a second time to the same value without performing any change in the database, will cause the result: agnSSanityCheckStatus = unknown. This attribute doesn't cause actual Flip.

INT agnCSaveNetFlipDbCmd

1.3.6.1.4.1.164.3.1.2.5.4.4

INTEGER

read-write

Setting this attribute to on(3) will save the Temp Flip DB Into the NVRAM without actual flip.

INT agnDlciCmprCnfgIdx

1.3.6.1.4.1.164.3.1.2.3.2.1.1

INTEGER

read-only

This attribute indicates the configuration to which the Compressed information is related.

INT agnDlciCmprDlciIdx

1.3.6.1.4.1.164.3.1.2.3.2.1.3

INTEGER

read-only

This attribute indicates a unique identifier of the Dlci, the compressed information relates to. The values are between 16 - 991.

agnDlciCmprEntry

1.3.6.1.4.1.164.3.1.2.3.2.1

not-accessible

OCT agnDlciCmprObj

1.3.6.1.4.1.164.3.1.2.3.2.1.4

OCTET STRING

read-write

This attribute is the compressed information itself.

agnDlciCmprTable

1.3.6.1.4.1.164.3.1.2.3.2

not-accessible

INT agnDlciCmprVersion

1.3.6.1.4.1.164.3.1.2.3.2.1.2

INTEGER

read-only

This attribute indicates the version of the internal format of the Compressed data

INT agnDlciCnfgIdx

1.3.6.1.4.1.164.3.1.2.8.1.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.

agnDlciEntry

1.3.6.1.4.1.164.3.1.2.8.1.1

not-accessible

INT agnDlciFunnelEnable

1.3.6.1.4.1.164.3.1.2.8.1.1.15

INTEGER

read-write

This object selects Funnel activation enable/disable: - disabled: Funnel operation disabled. The agnDlciTxBe and agnDlciTxBc values are not used for funneling. - enabled : Funnel operation enabled. The agnDlciTxBe and agnDlciTxBc values are used for funneling calculations. This object is relevant only for an encapsulating DLCI. In case of a Link Selector DLCI, the agnDlciTxBe and agnDlciTxBc values are used for bandwidth of Link Selector. Default=disabled.

INT agnDlciHIdx

1.3.6.1.4.1.164.3.1.2.8.1.1.7

INTEGER

read-only

This attribute indicates a unique internal connection dlci number which the src dlci is routed to.

INT agnDlciHPrtIdx

1.3.6.1.4.1.164.3.1.2.8.1.1.6

INTEGER

read-only

This attribute indicates a unique port id which the dlci is routed to.

INT agnDlciHSltIdx

1.3.6.1.4.1.164.3.1.2.8.1.1.5

INTEGER

read-only

This attribute indicates a unique slot position In the Mux (Agent) where the dlci is routed to. For ISDN BRI ports of MX300/30 units: io1(5) = isdn1(5) and io2(6) = isdn2(6) In the ?004 Unit the entries io6(10)..io16) are not valid

INT agnDlciLIdx

1.3.6.1.4.1.164.3.1.2.8.1.1.4

INTEGER

read-only

This attribute indicates a unique index for each possible used dlci(16..991). 0=notApplicable (for voice switching) LIdx is defined according one of the following possiblities: 1. LSlotIdx is < HSlotIdx. 2. LSlotIdx is = HSlotIdx and LPrtIdx is < HPrtIdx. 3. LSlotIdx is = HSlotIdx and LPrtIdx is = HPrtIdx but LIdx is < HIdx.

INT agnDlciLPrtIdx

1.3.6.1.4.1.164.3.1.2.8.1.1.3

INTEGER

read-only

This attribute indicates a unique external or internal port number, including linkSelector or encapsulator. 100=noConnect (for voice switching) LPrtIdx is defined according one of the following possiblities: 1. LSlotIdx is < HSlotIdx. 2. LSlotIdx is = HSlotIdx and LPrtIdx is < HPrtIdx. 3. LSlotIdx is = HSlotIdx and LPrtIdx is = HPrtIdx but LIdx is < HIdx.

INT agnDlciLSltIdx

1.3.6.1.4.1.164.3.1.2.8.1.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the card is inserted. vs=Voice Switching In the ?004 Unit the entries io6(10)..io16) are not valid. For ISDN BRI ports of MX300/30 units: io1(5) = isdn1(5) and io2(6) = isdn2(6) LSlotIdx is defined according one of the following possiblities: 1. LSlotIdx is < HSlotIdx. 2. LSlotIdx is = HSlotIdx and LPrtIdx is < HPrtIdx. 3. LSlotIdx is = HSlotIdx and LPrtIdx is = HPrtIdx but LIdx is < HIdx.

INT agnDlciPriority

1.3.6.1.4.1.164.3.1.2.8.1.1.12

INTEGER

read-write

This attribute indicates a unique priority of the pcv. 1 is the lowest priority and 7 is the highest priority.

INT agnDlciRoutingProtocol

1.3.6.1.4.1.164.3.1.2.8.1.1.16

INTEGER

read-write

This object is relevant only when one side of the DLCI is a CL-NMS interface. It defines which Routing Protocol will be used for management via CL-NMS port. notApplicable will be used for all slots but CL. rip is a proprietary rip protocol. Default=rip.

INT agnDlciRowStatus

1.3.6.1.4.1.164.3.1.2.8.1.1.17

INTEGER

read-write

This attribute allows to create/delete a row in this table. For creating a row, the NMS should set agnRowStatus.255.id2.id3.id4.id5.id6.id7 = active(1). For destroying a row, the NMS should set: agnRowStatus.255.id2.id3.id4.id5.id6.id7 = destroy(6). Only rows with status active(1) are relevant.

INT agnDlciRxBc

1.3.6.1.4.1.164.3.1.2.8.1.1.10

INTEGER

read-write

This attribute indicates a unique Rx committed bandwidth on the user receive line or at the port transmit line.

INT agnDlciRxBe

1.3.6.1.4.1.164.3.1.2.8.1.1.11

INTEGER

read-write

This attribute indicates a unique Rx excess bandwidth on the user receive line or at the port transmit line.

INT agnDlciSpoofing

1.3.6.1.4.1.164.3.1.2.8.1.1.14

INTEGER

read-write

This object refers to sending of RIP messages: - yes : RIP messages will be sent ONLY if there is a change in the Net. - no : RIP messages will be always sent. This object is relevant only when one side of the DLCI is a CL-NMS interface. Default=no.

INT agnDlciStatus

1.3.6.1.4.1.164.3.1.2.8.1.1.13

INTEGER

read-only

This attribute indicates the status of the pvc. The status is disconnected(1) when one of the sides is programmed as not connected

agnDlciTable

1.3.6.1.4.1.164.3.1.2.8.1

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry.

INT agnDlciTxBc

1.3.6.1.4.1.164.3.1.2.8.1.1.8

INTEGER

read-write

This attribute indicates a unique Tx committed bandwidth on the user transmit line or at the port receive line.

INT agnDlciTxBe

1.3.6.1.4.1.164.3.1.2.8.1.1.9

INTEGER

read-write

This attribute indicates a unique Tx excess bandwidth on the user transmit line or at the port receive line.

agnFlipDb

1.3.6.1.4.1.164.3.1.2.5

agnFlipDbControls

1.3.6.1.4.1.164.3.1.2.5.4

OCT agnGlobalAlarmMask

1.3.6.1.4.1.164.6.2.19

OCTET STRING

read-write

The value of this attribute determines the alarm traps the agent should mask and not send to the managers. Each bit from a certain octet represents a certain alarm.

STR agnHwVersion

1.3.6.1.4.1.164.6.2.1

DisplayString

read-write

ASCII string for description and display of the agent hardware version, as it is known by the agent software.The user can update the version upon request when he changes components in the agent's module

INT agnIndication

1.3.6.1.4.1.164.6.2.8

INTEGER

read-only

Attribute describing the state of the entity the agent is responsible for. In case of a modular entity, the value of this attribute will be according to the component which is in the worst state. The order of severity (from top to bottom) is: faulty (critical)-> major-> minor-> warning-> event-> normal (off).

OCT agnLed

1.3.6.1.4.1.164.6.2.10

OCTET STRING

read-only

This entry specifies the LEDs status of the agent module . Each led will be represented by 4 bits where the first 2 bits (left) will specify the status : (00=NA, 01=OFF, 10=ON, 11=BLINK), and the next two bits (right) will specify the color : (00=GREEN, 01=RED, 10=YELLOW, 11=ORANGE)

agnLinkMapEntry

1.3.6.1.4.1.164.3.1.5.1.1

not-accessible

agnLinkMapTable

1.3.6.1.4.1.164.3.1.5.1

not-accessible

agnListDecoding

1.3.6.1.4.1.164.3.1.2.7

INT agnListDecodingAcmRelayPrt

1.3.6.1.4.1.164.3.1.2.7.1.1.7

INTEGER

read-write

This object indicates the ACM port within the slot, desired for outbound relay (report) for the selected alarm. notApplicable - when agnListDecodingType=sanity OR when agnListDecodingAcmRelaySlt=notApplicable.

INT agnListDecodingAcmRelaySlt

1.3.6.1.4.1.164.3.1.2.7.1.1.6

INTEGER

read-write

This object indicates the ACM slot, desired for outbound relay (report) for the selected alarm. In the ?004 Unit the entries io6(10)..io12(16) are not valid. none - when agnListDecodingType=alr AND the selected alarm should not be reported by an ACM card. notApplicable - when agnListDecodingType=sanity OR when [agnListDecodingType=alr and there is no ACM card installed in the Mux].

INT agnListDecodingCode

1.3.6.1.4.1.164.3.1.2.7.1.1.2

INTEGER

read-only

The specific code for which decoding is needed.

INT agnListDecodingDefState

1.3.6.1.4.1.164.3.1.2.7.1.1.4

INTEGER

read-only

This object is applicable only for agnListDecodingType=alr. It reports the default state/severity of each alarm. User can change the severity of the alarms defined by this default via the agnListDecodingSeverity object.

STR agnListDecodingDescription

1.3.6.1.4.1.164.3.1.2.7.1.1.3

DisplayString

read-only

The description fitting the specific code and type of list required.

agnListDecodingEntry

1.3.6.1.4.1.164.3.1.2.7.1.1

not-accessible

INT agnListDecodingSeverity

1.3.6.1.4.1.164.3.1.2.7.1.1.5

INTEGER

read-write

This object is applicable only for agnListDecodingType=alr. It enables the user to select a severity for each alarm. The severity is set per alarm code (same for all slots/ports using this code). event - can be set only for an alarm that is defined by default as 'event'. User can change the severity of the alarms defined by default as minor or major. The severity of an event may be set to another severity, but the change will actually happen only if the event threshold is active and passed the Set/ON condition. An event alarm that passed the threshold and changed its severity, will return automatically to event severity when meeting its Reset/OFF condition.

agnListDecodingTable

1.3.6.1.4.1.164.3.1.2.7.1

not-accessible

A decoding table . For each type of list, a description is given for each existing code.

INT agnListDecodingType

1.3.6.1.4.1.164.3.1.2.7.1.1.1

INTEGER

read-only

The type of list the decoding data refers to. alr - Alarms list sanity - Sanity Check Error list.

INT agnMonitorModeCmd

1.3.6.1.4.1.164.6.2.9

INTEGER

read-write

Setting this attribute to ON, will enforce the agent to change its mode of operation to Monitor Mode

agnMux

1.3.6.1.4.1.164.3.2.1

agnSa

1.3.6.1.4.1.164.3.1.2.6

INT agnSActiveCnfg

1.3.6.1.4.1.164.3.1.2.1.4

INTEGER

read-only

This entry specifies the unique identifier of the configuration, that is currently active and running.

INT agnSAlrCode

1.3.6.1.4.1.164.3.1.2.1.15.1.3

INTEGER

read-only

A code identifying the alarm of an entry in the alarm status table at system level.

STR agnSAlrCodeDescription

1.3.6.1.4.1.164.3.1.2.1.15.1.2

DisplayString

read-only

This attribute is a full text description of the alarm . The alarm description includes the following information: alarm code, alarm text, alarm severity, Masked or Inverted flag and counter.

INT agnSAlrCounter

1.3.6.1.4.1.164.3.1.2.1.15.1.6

INTEGER

read-only

A counter - how many times the alarm occured since last clear operation. ON and OFF Alarm will be counted separately.

agnSAlrEntry

1.3.6.1.4.1.164.3.1.2.1.15.1

not-accessible

INT agnSAlrIdx

1.3.6.1.4.1.164.3.1.2.1.15.1.1

INTEGER

read-only

A unique number to identify an entry in the alarm status table of the agent.

INT agnSAlrInvert

1.3.6.1.4.1.164.3.1.2.1.15.1.8

INTEGER

read-only

Alarm invert : on/off.

INT agnSAlrMask

1.3.6.1.4.1.164.3.1.2.1.15.1.7

INTEGER

read-only

Alarm mask : on/off.

INT agnSAlrSeverity

1.3.6.1.4.1.164.3.1.2.1.15.1.4

INTEGER

read-only

The severity of the alarm.

INT agnSAlrState

1.3.6.1.4.1.164.3.1.2.1.15.1.5

INTEGER

read-only

State of the alarm.

INT agnSAlrStatus

1.3.6.1.4.1.164.3.1.2.1.10

INTEGER

read-only

Indicates the alarm state in the agent level, i.e. lower level (card/port) alarms not included. critical(7) - when there is at least one active (state ON) critical alarm, otherwise it will be set to major(5) - when there is at least one active (state ON) major alarm, otherwise it will be set to minor(4) - if there is at least one active (state ON) minor alarm, otherwise it will be set to warning(6) - if there is at least one active (state ON) warning alarm, otherwise it will be set to event(3) - if there was at least one alarm event (including state on,off events) since the last clear operation.

INT agnSAlrStatusAll

1.3.6.1.4.1.164.3.1.2.1.11

INTEGER

read-only

Indicates the alarm state of the entire agent, i.e. including card and port alarms status. critical(7) - when there is at least one active (state ON) critical alarm, otherwise it will be set to major(5) - when there is at least one active (state ON) major alarm, otherwise it will be set to minor(4) - if there is at least one active (state ON) minor alarm, otherwise it will be set to warning(6) - if there is at least one active (state ON) warning alarm, otherwise it will be set to event(3) - if there was at least one alarm event (including state on,off events) since the last clear operation.

agnSAlrTable

1.3.6.1.4.1.164.3.1.2.1.15

not-accessible

List of agent related alarms and indications for alarms at system level.

INT agnSaSwchStatus

1.3.6.1.4.1.164.3.1.2.6.1

INTEGER

read-only

This object indicates the status of the switches on the stand-alone unit. Each switch is represented by a bit. The status is a sum of 2**n, according to the bits: bit 0 NMS (LSB) bit 1 Terminal '1' = forces the DCE to be terminal with Rate=9600bps, Data bits=8, Stop bits=1 bit 2 Xray bit 3 SW-Load '1' = when SW is loaded bit 4 DBS Default of all bits=0 When the status of these switches is unknown, the value of this object is 255.

INT agnSClearAllAlrCmd

1.3.6.1.4.1.164.3.1.2.1.17

INTEGER

read-write

Setting this attribute to ON, enforce a clear operation on all MUX alarm events at the levels of agent, slots and ports. The clear operation will not be applied for masked/inverted alarms.

INT agnSClearAlrCmd

1.3.6.1.4.1.164.3.1.2.1.16

INTEGER

read-write

Setting this attribute to ON, enforce a clear operation on all the agent(general) events. General alarms are alarms which are not specific to a card or port. The clear operation will not be applied for masked/inverted alarms.

INT agnSClkSrc

1.3.6.1.4.1.164.3.1.2.1.9

INTEGER

read-only

This entry indicates the source of the system clock.

INT agnSCmprErrIdx

1.3.6.1.4.1.164.3.1.2.3.5.1.2

INTEGER

read-only

Unique number to identify an entry in the errors list table. The maximum entry value cannot exceed the value of 'agnSNoOfSanityCheckErr'.

agnSCmprErrListEntry

1.3.6.1.4.1.164.3.1.2.3.5.1

not-accessible

agnSCmprErrListTable

1.3.6.1.4.1.164.3.1.2.3.5

not-accessible

OCT agnSCmprErrObj

1.3.6.1.4.1.164.3.1.2.3.5.1.3

OCTET STRING

read-only

This attribute is a full text description of the error, including: error code, slot and port numbers related to the code .

INT agnSCmprErrVersion

1.3.6.1.4.1.164.3.1.2.3.5.1.1

INTEGER

read-only

The version of the compressed data

agnSCnfgEntry

1.3.6.1.4.1.164.3.1.2.1.22.1

not-accessible

agnSCnfgTable

1.3.6.1.4.1.164.3.1.2.1.22

not-accessible

This table contains an entry per configuration. It indicates if the configuration is valid.

STR agnSDateCmd

1.3.6.1.4.1.164.3.1.2.1.2

DisplayString

read-write

This entry indicates the current date as it is known by the agent using its own real-time clock. The format would be as specified by the agnSDateFormat. This parameter can be set for time synchronization between the NMS and the Agent.

INT agnSDateFormat

1.3.6.1.4.1.164.3.1.2.1.1

INTEGER

read-write

This entry indicates the date and time format used for the agnSDateAndTimeCmd and for the alarm history report. MP-2100H, MP-2100 r1-r4 and MAXcess products do not support the 'yyyyMMDD' format.

INT agnSEditBy

1.3.6.1.4.1.164.3.1.2.1.8

INTEGER

read-only

This entry indicates which MMI application is working on the edited config. The editing phase starts at the first modify operation and ends after an update(load) operation.

INT agnSEditCnfg

1.3.6.1.4.1.164.3.1.2.1.5

INTEGER

read-only

This entry indicates the unique identifier of the configuration that is currently loaded into the tmp working space for manipulation and update operations. Value of 255 means no config. is under editing process.

INT agnSEntryIdx

1.3.6.1.4.1.164.3.1.2.1.22.1.1

INTEGER

read-only

Unique number to identify an entry in the configuration table.

INT agnSEntryIsValid

1.3.6.1.4.1.164.3.1.2.1.22.1.2

INTEGER

read-only

This attribute indicates whether the specific configuration is valid in the MUX . Value of NO indicates: no such configuration in the MUX.

STR agnSErrDescription

1.3.6.1.4.1.164.3.1.2.1.20.1.2

DisplayString

read-only

This attribute is a full text description of the sanity check error including error code, slot and port numbers related to the code .

INT agnSErrIdx

1.3.6.1.4.1.164.3.1.2.1.20.1.1

INTEGER

read-only

Unique number to identify an entry in the error list table. The maximum entry value cannot exceed the value of 'agnSNoOfSanityCheckErr'.

agnSErrListEntry

1.3.6.1.4.1.164.3.1.2.1.20.1

not-accessible

agnSErrListTable

1.3.6.1.4.1.164.3.1.2.1.20

not-accessible

List of errors and warnings found during Sanity Check process.

agnSigProfile

1.3.6.1.4.1.164.3.1.2.10

OCT agnSigProfileABCD

1.3.6.1.4.1.164.3.1.2.10.1.1.4

OCTET STRING

read-write

This object represents 6 parameters, by 3 Octets : Busy Code-MSB nibble, - applicable only for Rx translation Idle Code- nibble, - applicable only for Rx translation D Bit Code- nibble, C Bit Code- nibble, B Bit Code- nibble, A Bit Code-LSB nibble. Each of Busy and Idle Code nibble will have the valid values: 0000 .. FFFF. Each of A,B,C,D Bit Code nibble represents: 0 hex = 0000 = 0 1 hex = 0001 = 1 2 hex = 0010 = A bit 3 hex = 0011 = B bit 4 hex = 0100 = C bit 5 hex = 0101 = D bit 6 hex = 0110 = A bit inverse 7 hex = 0111 = B bit inverse 8 hex = 1000 = C bit inverse 9 hex = 1001 = D bit inverse A-F hex - not used (invalid values)

INT agnSigProfileCnfgIdx

1.3.6.1.4.1.164.3.1.2.10.1.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. The write operation is valid only to the TmpCnfg.

agnSigProfileEntry

1.3.6.1.4.1.164.3.1.2.10.1.1

not-accessible

INT agnSigProfileIdx

1.3.6.1.4.1.164.3.1.2.10.1.1.2

INTEGER

read-only

This attribute indicates the Signaling Profile (1..5).

INT agnSigProfileRxTx

1.3.6.1.4.1.164.3.1.2.10.1.1.3

INTEGER

read-only

This attribute indicates if the following objects refer to: Rx or Tx translation. Rx : ML->IO Tx : IO->ML .

agnSigProfileTable

1.3.6.1.4.1.164.3.1.2.10.1

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry.

STR agnSLastCnfgFlipCause

1.3.6.1.4.1.164.3.1.2.1.7

DisplayString

read-only

This entry describes the flip's cause.

STR agnSLastCnfgFlipTime

1.3.6.1.4.1.164.3.1.2.1.6

DisplayString

read-only

This entry indicates the Date & Time of the last flip to the current configuration at the agent.

INT agnSMaskedAlrStat

1.3.6.1.4.1.164.3.1.2.1.12

INTEGER

read-only

Indicates the alarm state in the agent level,[ i.e. lower level (card/port) alarms not included] including Masked alarms. critical(7) - when there is at least one active (state ON) critical alarm, otherwise it will be set to major(5) - when there is at least one active (state ON) major alarm, otherwise it will be set to minor(4) - if there is at least one active (state ON) minor alarm, otherwise it will be set to warning(6) - if there is at least one active (state ON) warning alarm, otherwise it will be set to event(3) - if there was at least one alarm event (including state on,off events) since the last clear operation.

INT agnSMaskedAlrStatAll

1.3.6.1.4.1.164.3.1.2.1.13

INTEGER

read-only

Indicates the alarm state of the entire agent, i.e. including card and port alarms status,including Masked alarms. critical(7) - when there is at least one active (state ON) critical alarm, otherwise it will be set to major(5) - when there is at least one active (state ON) major alarm, otherwise it will be set to minor(4) - if there is at least one active (state ON) minor alarm, otherwise it will be set to warning(6) - if there is at least one active (state ON) warning alarm, otherwise it will be set to event(3) - if there was at least one alarm event (including state on,off events) since the last clear operation.

INT agnSMaxNoOfCnfg

1.3.6.1.4.1.164.3.1.2.1.21

INTEGER

read-only

Maximum number of configurations that can be defined and stored in the MUX. If the mux has a large capacity, the maximum will be limited to 254.

INT agnSNoOfSanityCheckErr

1.3.6.1.4.1.164.3.1.2.1.19

INTEGER

read-only

This entry indicates the number of errors/warnings discovered by the last SanityCheck process.

OID agnSpecific

1.3.6.1.4.1.164.6.2.5

OBJECT IDENTIFIER

read-only

Object identifier of entity containing additional information regarding this instance.

INT agnSSanityCheckStatus

1.3.6.1.4.1.164.3.1.2.1.18

INTEGER

read-only

Upon completion of the Sanity check process on the TmpCnfg this attribute will be set to: FAIL(2) - when there is at least one error encountered and possibly some warnings. WARNING(3) - when there are only warnings. otherwise, the value will be OK(4). The value will be UNKNOWN(1) if changes were made in the TmpCnfg following the last Sanity check.

NTF agnStatusChangeTrap

1.3.6.1.4.1.164.6.1.0.2

This trap is sent whenever the state of the entity the agent is responsible for changed. TDM devices will send agnTestStatus variable to indicate the current test status.

STR agnSTimeCmd

1.3.6.1.4.1.164.3.1.2.1.3

DisplayString

read-write

This entry indicates the current time as it is known by the agent using its own real-time clock. This parameter can be set for time synchronization between the NMS and the Agent.

INT agnSTstStatAll

1.3.6.1.4.1.164.3.1.2.1.14

INTEGER

read-only

on(3) - when there is at least one test in progress in one of the agent cards, otherwise the value will be off(2).

agnSystemDlci

1.3.6.1.4.1.164.3.1.2.8

agnSystemTs

1.3.6.1.4.1.164.3.1.2.11

agnt

1.3.6.1.4.1.164.6.2

INT agnTestStatus

1.3.6.1.4.1.164.6.2.22

INTEGER

read-only

Indicates the current test status (for all levels: system, card, port). This attribute will be set to: on(3): when there is at least one test in progress on the system/card/port off(2): when there is NO test in progress on the system/card/port

INT agnTrapMask

1.3.6.1.4.1.164.6.2.2

INTEGER

read-write

The value of this attribute determines the type of traps the agent should mask and not send to the management console. The value is differently determined for different products. There are mainly two methods: - an integer number, specifying the traps' severity. - a sum of 2**n, where n is a bit assigned to a certain masked trap group. User should consult the product specification, to find out the method employed.

OCT agnTrapValue

1.3.6.1.4.1.164.6.2.3

OCTET STRING

read-only

The value of the trap decoded in internal RAD format. Full description is given in the Trap definition file

INT agnTsBitIdx

1.3.6.1.4.1.164.3.1.2.11.1.1.5

INTEGER

read-only

This attribute indicates a unique index for the Bit of each TS (Time-Slot). 1..8 - Bit 1.. Bit 8 255 - notApplicable This object is applicable only in Split Time-Slot cases.

INT agnTsCmprCnfgIdx

1.3.6.1.4.1.164.3.1.2.3.6.1.2

INTEGER

read-only

This object indicates the configuration to which the Compressed information is related. 255=temporary configuration. Set can be performed only to the temporary configuration.

OCT agnTsCmprData

1.3.6.1.4.1.164.3.1.2.3.6.1.6

OCTET STRING

read-write

This object is the compressed information itself. It provides information about all TSs of a port.

agnTsCmprEntry

1.3.6.1.4.1.164.3.1.2.3.6.1

not-accessible

INT agnTsCmprPduIdx

1.3.6.1.4.1.164.3.1.2.3.6.1.5

INTEGER

read-only

This object indicates the PDU index within the same port. That provides for the case when one PDU is not sufficient for all TS Assignment data of the same port.

INT agnTsCmprPortIdx

1.3.6.1.4.1.164.3.1.2.3.6.1.4

INTEGER

read-only

This object indicates the Port within the Slot, to which the Compressed information is related. For Port Index see each product's spec.

INT agnTsCmprSlotIdx

1.3.6.1.4.1.164.3.1.2.3.6.1.3

INTEGER

read-only

This object indicates the Slot to which the Compressed information is related. For MP-2100: IO-1..IO-12 = (5).. (16) For DXC-30 : IO-1..IO-15 = (5).. (19).

agnTsCmprTable

1.3.6.1.4.1.164.3.1.2.3.6

not-accessible

INT agnTsCmprVerIdx

1.3.6.1.4.1.164.3.1.2.3.6.1.1

INTEGER

read-only

This object indicates the version of the internal format of the Compressed data.

INT agnTsCnfgIdx

1.3.6.1.4.1.164.3.1.2.11.1.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.

INT agnTsConIdx

1.3.6.1.4.1.164.3.1.2.11.1.1.8

INTEGER

read-only

This attribute indicates a unique TS number the Src TS is routed to. Valid values: - for T1 ports - 1..24, Fbit(25) - for E1 ports - 1..31 - for HDSL ports - 1..32 ; 32 will represent TS0. - notApplicable - 255 (for ports that don't have TSs).

INT agnTsConPrtIdx

1.3.6.1.4.1.164.3.1.2.11.1.1.7

INTEGER

read-only

This attribute indicates a unique port id the TS is routed to. notApplicable - when agnTsType=mng or spare For MP: exPrt1 (1) .. exPrt12 (12) , notApplicable(100), inPrt1 (101) .. inPrt48 (148).

INT agnTsConSltIdx

1.3.6.1.4.1.164.3.1.2.11.1.1.6

INTEGER

read-only

This attribute indicates a unique slot position In the Mux where the TS is routed to.

INT agnTsDirection

1.3.6.1.4.1.164.3.1.2.11.1.1.11

INTEGER

read-write

Direction of the connection. This parameter is especially important when in MP a ML is connected to an IO port that has no TSs, so it doesn't appear in the TS Assignment for the first 5 indexes. notApplicable - for products that do not support this object or for certain TS Types (for example: mng, spare) rx - the ML only Receives from the IO Port (the ML will appear in the first 5 indexes). tx - the ML only Transmits to the IO Port (the ML will appear in the first 5 indexes). Nothing is received back. both - the ML Receives and Transmits to the IO Port (the ML will appear in the first 5 indexes). bcastSrc - the ML is a Broadcast-Bidirectional Source. It Transmits to one or several IO Ports (including the one that appears in the last 3 indexes) and sometimes receives. The Port that responds is dynamic (it can be another each time). The ML will appear in the first 5 indexes. bcastDst - the ML is a Broadcast-Bidirectional Destination. Therefore, it Receives and sometimes Transmits. The ML will appear in the first 5 indexes.

agnTsEntry

1.3.6.1.4.1.164.3.1.2.11.1.1

not-accessible

INT agnTsIdx

1.3.6.1.4.1.164.3.1.2.11.1.1.4

INTEGER

read-only

This attribute indicates a unique index for TS (Time-Slot). - for T1 ports - 1..24, Fbit(25) - for E1 ports - 1..31 - for HDSL ports - 1..32 ; 32 will represent TS0.

INT agnTsPrtIdx

1.3.6.1.4.1.164.3.1.2.11.1.1.3

INTEGER

read-only

This attribute indicates a unique external or internal port number. For MP: exPrt1 (1) , exPrt2 (2) , exPrt3 (3) , exPrt4 (4) , exPrt5 (5) , exPrt6 (6) , exPrt7 (7) , exPrt8 (8) , exPrt9 (9) , exPrt10 (10) , exPrt11 (11) , exPrt12 (12) , inPrt1 (101) , inPrt2 (102) , inPrt3 (103) , inPrt4 (104) , inPrt5 (105) , inPrt6 (106) , inPrt7 (107) , inPrt8 (108) , inPrt9 (109) , inPrt10 (110) , inPrt11 (111) , inPrt12 (112)

INT agnTsRowStatus

1.3.6.1.4.1.164.3.1.2.11.1.1.10

INTEGER

read-write

This attribute allows to create/delete a row in this table. For creating a row, the NMS should set agnTsRowStatus.255.id2.id3.id4.id5.id6.id7.id8 = active(1). For destroying a row, the NMS should set: agnTsRowStatus.255.id2.id3.id4.id5.id6.id7.id8 = destroy(6). Only rows with status active(1) are relevant.

INT agnTsSltIdx

1.3.6.1.4.1.164.3.1.2.11.1.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the card is inserted.

agnTsTable

1.3.6.1.4.1.164.3.1.2.11.1

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry.

INT agnTsType

1.3.6.1.4.1.164.3.1.2.11.1.1.9

INTEGER

read-write

Time-Slot Type - regarding its connection and media type. voice, data, vcMP - connected and the media is specified. mng - management. This TS is Dedicated to Management (not disconnected, but not connected to another port). spare - applicable for ML-20 only. These TSs should be reserved for future connection, though at the moment are not connected.

agnVoiceSwConfEntry

1.3.6.1.4.1.164.3.1.2.9.1.1

not-accessible

INT agnVoiceSwConfHGConnect

1.3.6.1.4.1.164.3.1.2.9.5.1.3

INTEGER

read-write

This attribute indicates whether the hunt group should be considered in any of the mux algorithms.

INT agnVoiceSwConfHGdbIdx

1.3.6.1.4.1.164.3.1.2.9.5.1.1

INTEGER

read-only

Active or Temporary Table. Both configurations can be read but only the Temporary can be written to.

agnVoiceSwConfHGEntry

1.3.6.1.4.1.164.3.1.2.9.5.1

not-accessible

INT agnVoiceSwConfHGExt

1.3.6.1.4.1.164.3.1.2.9.5.1.4

INTEGER

read-write

This is the extension number of the hunt group. 0 is for not valid. The allowed range is 10 - 99.

INT agnVoiceSwConfHGIdx

1.3.6.1.4.1.164.3.1.2.9.5.1.2

INTEGER

read-only

There may be up to 10 Hunt Groups per MXcess. That's the index of the hunt group relevant to this row.

agnVoiceSwConfHGTable

1.3.6.1.4.1.164.3.1.2.9.5

not-accessible

Table of Hunt Groups.

INT agnVoiceSwConfIdx

1.3.6.1.4.1.164.3.1.2.9.1.1.1

INTEGER

read-only

Active or Temporary Table. Both configurations can be read but only the Temporary can be written to.

STR agnVoiceSwConfNodeId

1.3.6.1.4.1.164.3.1.2.9.1.1.3

DisplayString

read-write

1, 2 or 3 digits, (1-9),(0-9),(0-9).

INT agnVoiceSwConfNoOfHops

1.3.6.1.4.1.164.3.1.2.9.1.1.4

INTEGER

read-write

Number of hops the frame will go through the net before deciding to discard the frame (like time-to-live in IP). 0 = notApplicable Default=20 .

INT agnVoiceSwConfRtAction

1.3.6.1.4.1.164.3.1.2.9.2.1.4

INTEGER

read-write

Action that the system should perform for this digits: agnVoiceSwConfRtDigits.

STR agnVoiceSwConfRtData

1.3.6.1.4.1.164.3.1.2.9.2.1.5

DisplayString

read-write

This field is relevant for actions hgr(6), del(7) and rep(8).

INT agnVoiceSwConfRtDbId

1.3.6.1.4.1.164.3.1.2.9.2.1.1

INTEGER

read-only

Active or Temporary Table. Both configurations can be read but only the Temporary can be written to.

STR agnVoiceSwConfRtDigits

1.3.6.1.4.1.164.3.1.2.9.2.1.3

DisplayString

read-write

Serie of digits or keyword 'ELSE'..

INT agnVoiceSwConfRtDlci

1.3.6.1.4.1.164.3.1.2.9.2.1.8

INTEGER

read-write

Routing DLCI- Relevant for actions zone(2) and node(3). Valid values: 0=notApplicable (for non-routing case). 1, 16..991

agnVoiceSwConfRtEntry

1.3.6.1.4.1.164.3.1.2.9.2.1

not-accessible

INT agnVoiceSwConfRtIdx

1.3.6.1.4.1.164.3.1.2.9.2.1.2

INTEGER

read-only

The Index of the row.

INT agnVoiceSwConfRtPort

1.3.6.1.4.1.164.3.1.2.9.2.1.7

INTEGER

read-write

Routing Port- Relevant for actions zone(2) and node(3). 100=noConnect (for non-routing case).

INT agnVoiceSwConfRtRowStatus

1.3.6.1.4.1.164.3.1.2.9.2.1.9

INTEGER

read-write

Status of the row for creating/deleting entries in the table.

INT agnVoiceSwConfRtSlot

1.3.6.1.4.1.164.3.1.2.9.2.1.6

INTEGER

read-write

Routing Slot- Relevant for actions zone(2) and node(3).

agnVoiceSwConfRtTable

1.3.6.1.4.1.164.3.1.2.9.2

not-accessible

Routing Table for Voice Switching.

agnVoiceSwConfTable

1.3.6.1.4.1.164.3.1.2.9.1

not-accessible

MXcess Configuration for Voice Switching.

STR agnVoiceSwConfZoneId

1.3.6.1.4.1.164.3.1.2.9.1.1.2

DisplayString

read-write

1 or 2 digits, (0-9)(1-9).

agnVoiceSwitching

1.3.6.1.4.1.164.3.1.2.9

agnWanGen

1.3.6.1.4.1.164.3.1.2

agnXCmprEntry

1.3.6.1.4.1.164.3.1.2.3.7.1

not-accessible

INT agnXCmprIdx3

1.3.6.1.4.1.164.3.1.2.3.7.1.3

INTEGER

read-only

3rd index - can be used for any purpose according to the agnXCmprTypIdx. Example: for V5.1 Variant, this attribute indicates the configuration to which the Compressed information is related. 255=temporary configuration. Set can be performed only to the temporary configuration.

INT agnXCmprIdx4

1.3.6.1.4.1.164.3.1.2.3.7.1.4

INTEGER

read-only

4th index - can be used for any purpose according to the agnXCmprTypIdx. Example: for V5.1 Variant,this attribute indicates a unique number of the slot position where the card is inserted. Valid values: psA(1),psB(2),clA(3),clB(4),io1(5)..io12(16); notApplicable=255.

INT agnXCmprIdx5

1.3.6.1.4.1.164.3.1.2.3.7.1.5

INTEGER

read-only

5th index - can be used for any purpose according to the agnXCmprTypIdx. Example: for V5.1 Variant,this attribute indicates a unique identifier of the port the compressed information relates to. Valid values: exPrt1 (1) .. exPrt12 (12) , inPrt1 (101) .. inPrt48 (148).

INT agnXCmprIdx6

1.3.6.1.4.1.164.3.1.2.3.7.1.6

INTEGER

read-only

6th index - can be used for any purpose according to the agnXCmprTypIdx. Example: for V5.1 Variant,this attribute indicates the Variant index. Valid values are: 0..127, 255 (= temp cnfg).Set can be performed only to the temporary configuration.

INT agnXCmprIdx7

1.3.6.1.4.1.164.3.1.2.3.7.1.7

INTEGER

read-only

7th index - can be used for any purpose according to the agnXCmprTypIdx. Example: for V5.1 Variant,this attribute is not needed. Therefore, its value will be always 255=notApplicable.

OCT agnXCmprObj

1.3.6.1.4.1.164.3.1.2.3.7.1.8

OCTET STRING

read-write

This attribute is the compressed information itself.

agnXCmprTable

1.3.6.1.4.1.164.3.1.2.3.7

not-accessible

INT agnXCmprTypIdx

1.3.6.1.4.1.164.3.1.2.3.7.1.1

INTEGER

read-only

This attribute indicates the Type of the Compressed being referred. One of the types is V5.1 Variant data.

INT agnXCmprVersion

1.3.6.1.4.1.164.3.1.2.3.7.1.2

INTEGER

read-only

This attribute indicates the version of the internal format of the Compressed data.

INT alarmSeverity

1.3.6.1.4.1.164.6.2.20

INTEGER

read-only

This object specifies the severity of the alarms.

INT alarmState

1.3.6.1.4.1.164.6.2.21

INTEGER

read-only

.

NTF alarmsTrap

1.3.6.1.4.1.164.3.2.0.1

This trap is sent whenever alarm occurs in the agent.

STR alrBufDescription

1.3.6.1.4.1.164.3.1.2.4.1.1.2

DisplayString

read-only

This entry is a unique text description of the alarm in the buffer. The alarm description includes the following information: alarm code, slot id, card type, channel id , alarm text, alarm status, masked flag and event counter

alrBufEntry

1.3.6.1.4.1.164.3.1.2.4.1.1

not-accessible

alrBuffGen

1.3.6.1.4.1.164.3.1.2.4

INT alrBufIdx

1.3.6.1.4.1.164.3.1.2.4.1.1.1

INTEGER

read-only

This attribute indicates a unique number to identify this entry

alrBufTable

1.3.6.1.4.1.164.3.1.2.4.1

not-accessible

INT alrGenCode

1.3.6.1.4.1.164.3.3.4.3.1.1

INTEGER

read-only

This object is a unique code number, identifying a certain alarm.

INT alrGenDebounce

1.3.6.1.4.1.164.3.3.4.3.1.6

INTEGER

read-write

Debounce time for each alarm code, in seconds. The meaning is, that an alarm will be 'declared' as ON (or OFF), only after it was actually ON/OFF the Debouncing time selected by user. 0 = default debounce selection (each alarm has a default value). 1 = minimum value of seconds for debounce. 255 = mask = the alarm will Never be reported.

STR alrGenDescription

1.3.6.1.4.1.164.3.3.4.3.1.2

DisplayString

read-only

This entry is a unique text description, of the alarm corresponding to the specified code.

alrGenEntry

1.3.6.1.4.1.164.3.3.4.3.1

not-accessible

INT alrGenLevel

1.3.6.1.4.1.164.3.3.4.3.1.3

INTEGER

read-only

Alarm level.

INT alrGenSeverity

1.3.6.1.4.1.164.3.3.4.3.1.5

INTEGER

read-write

This object enables the user to select a severity for each alarm. The severity is set per alarm code (same for all slots/ports using this code).

INT alrGenSlotType

1.3.6.1.4.1.164.3.3.4.3.1.4

INTEGER

read-only

Slot type that the alarm is relevant to. clAndIo - an alarm that is relevant for both CL and IO slots.

alrGenTable

1.3.6.1.4.1.164.3.3.4.3

not-accessible

INT chassTotalNoOfClSlt

1.3.6.1.4.1.164.3.3.1.2.1.4

INTEGER

read-only

This object indicates the number of physical Common Logic slots in the chassis.

INT chassTotalNoOfIoSlt

1.3.6.1.4.1.164.3.3.1.2.1.2

INTEGER

read-only

This object indicates the total number of physical IO slots in the chassis, (not all slots must be occupied and active).

INT chassTotalNoOfMlSlt

1.3.6.1.4.1.164.3.3.1.2.1.5

INTEGER

read-only

This object indicates the number of physical Main Link slots in the chassis (Kmux).

INT chassTotalNoOfPsSlt

1.3.6.1.4.1.164.3.3.1.2.1.3

INTEGER

read-only

This object indicates the number of physical Power Supply slots in the chassis.

INT chassTotalNoOfSlt

1.3.6.1.4.1.164.3.3.1.2.1.1

INTEGER

read-only

This object indicates the number of physical slots in the Hub chassis.

INT chasTotalNoOfClSlt

1.3.6.1.4.1.164.3.1.1.5

INTEGER

read-only

This entry indicates the number of physical Common Logic slots in the chassis.

INT chasTotalNoOfIoSlt

1.3.6.1.4.1.164.3.1.1.3

INTEGER

read-only

This entry indicates the total number of physical IO slots in the chassis, (not all slots hardware should be occupied and active) .

INT chasTotalNoOfPsSlt

1.3.6.1.4.1.164.3.1.1.4

INTEGER

read-only

This entry indicates the number of physical Power Supply slots in the chassis.

INT chasTotalNoOfSlt

1.3.6.1.4.1.164.3.1.1.2

INTEGER

read-only

This entry indicates the number of physical slots in the chassis.

STR chasVersion

1.3.6.1.4.1.164.3.1.1.1

DisplayString

read-only

An ASCII string for description and display of the agent chassis version.

chasWanGen

1.3.6.1.4.1.164.3.1.1

cmprAgnGen

1.3.6.1.4.1.164.3.1.2.3

INT cmprCnfgIdx

1.3.6.1.4.1.164.3.3.4.1.1.2

INTEGER

read-only

This object indicates the configuration number the Compressed information relates to.

cmprEntry

1.3.6.1.4.1.164.3.3.4.1.1

not-accessible

cmprMdlGen

1.3.6.1.4.1.164.3.1.3.3

OCT cmprObj

1.3.6.1.4.1.164.3.3.4.1.1.6

OCTET STRING

read-write

This object is the compressed information itself, according to a predefined format, both agent and NMS agreed about.

cmprPrtGen

1.3.6.1.4.1.164.3.1.4.3

INT cmprPrtIdx

1.3.6.1.4.1.164.3.3.4.1.1.5

INTEGER

read-only

This object indicates a unique identifier of the port, the compressed information relates to. For DXC - according to the order in the card of cmprSltIdx: - first two digits will be: (IO slot number+10) - last one/two digits will be the port number within the card in odd or even numbers, as follows: * For the outside/external ports, in odd numbers: port1 = 1 port2 = 3 port3 = 5 etc... Example: port2 of IO slot 11 will be: 213 . * The inside/internal ports, in even numbers: port1 = 2 port2 = 4 port3 = 6 etc... Example: port2 of IO slot 11 will be: 214 . For FCD: see product's specification. If the port number is irrelevant to this parameter (if it is a system/card level alarm) the value will be 9999.

INT cmprSltIdx

1.3.6.1.4.1.164.3.3.4.1.1.4

INTEGER

read-only

This attribute indicates a unique number of the slot position where the card is inserted. When the unit is stand-alone or this object is not applicable, 255 will be used.

cmprTable

1.3.6.1.4.1.164.3.3.4.1

not-accessible

INT cmprTypeIdx

1.3.6.1.4.1.164.3.3.4.1.1.1

INTEGER

read-only

This object indicates the Type of the Compressed data referred (which table, which level, etc). The type is a code according to a convention between agent and NMS.

INT cmprVersion

1.3.6.1.4.1.164.3.3.4.1.1.3

INTEGER

read-only

This object indicates the version of the internal format of the Compressed data (the version of the convention used).

cnfgAgnGen

1.3.6.1.4.1.164.3.1.2.2

NTF cnfgFlipTrap

1.3.6.1.4.1.164.3.2.0.3

This trap is sent upon change of the active Configuration DB. Attached, is the new active Configuration no.

cnfgMdlGen

1.3.6.1.4.1.164.3.1.3.2

cnfgMdlMux

1.3.6.1.4.1.164.3.2.2.1

cnfgPrtGen

1.3.6.1.4.1.164.3.1.4.2

cnfgPrtMux

1.3.6.1.4.1.164.3.2.3.2

NTF cnfgUpdateTrap

1.3.6.1.4.1.164.3.3.0.6

This trap is sent upon change of the active Configuration DB.

dacsMux

1.3.6.1.4.1.164.3.3

NTF dacsMuxAlarmsTrap

1.3.6.1.4.1.164.3.3.0.2

This trap is sent when an alarm occurs.

diverseIfWanGen

1.3.6.1.4.1.164.3.1.6

INT ethBridgingMode

1.3.6.1.4.1.164.3.1.6.1.1.1.3

INTEGER

read-write

This object indicates the bridging mode of the Ethernet interface.

ethIf

1.3.6.1.4.1.164.3.1.6.1

ethIfEntry

1.3.6.1.4.1.164.3.1.6.1.1.1

not-accessible

INT ethIfIdx

1.3.6.1.4.1.164.3.1.6.1.1.1.1

INTEGER

read-only

A unique index of the ethernet interface/port.

ethIfTable

1.3.6.1.4.1.164.3.1.6.1.1

not-accessible

INT ethMode

1.3.6.1.4.1.164.3.1.6.1.1.1.2

INTEGER

read-write

This object indicates the Ethernet mode of operation.

STR fileName

1.3.6.1.4.1.164.6.2.12.2

DisplayString

read-write

The name of the file to be loaded. For protection, read returns NULL.

STR fileNameWithinProduct

1.3.6.1.4.1.164.6.2.12.9

DisplayString

read-write

The file name used by the product within the product file system.

IP fileServerIP

1.3.6.1.4.1.164.6.2.12.1

IpAddress

read-write

The IP address of the server from which the file is loaded

INT fileTransCmd

1.3.6.1.4.1.164.6.2.12.3

INTEGER

read-write

The command to be executed on fileName at fileServerIP.

fileTransfer

1.3.6.1.4.1.164.6.2.12

OCT fileTransferToSubSystems

1.3.6.1.4.1.164.6.2.12.8

OCTET STRING

read-write

This object represents the sub-systems the fileTransCmd refers to. It should be used when a system is divided to sub-systems and each sub-system (or part of them) can have a different SW/Configuration. Each bit of this object will represent one of the sub-systems. Bit='1' - APPLY to respective sub-system Bit='0' - DO NOT APPLY to respective sub-system For the meaning of each bit, see product's specification. User will select the sub-systems envolved by filling-in the bits that represent these sub-systems. In this case, the file represented by 'fileName' will include several parts, each representing one of the sub-systems. The agent will refer only to the part/s indicated by this object. 0 Octet Strings = not applicable DEFVAL = 0h for the products that support this object.

NTF flipDbChangeTrap

1.3.6.1.4.1.164.3.2.0.4

This trap is sent upon change of the active Flip tables (Flip DB).

genDacsMux

1.3.6.1.4.1.164.3.3.4

linkSelectorCnfgEntry

1.3.6.1.4.1.164.3.2.3.2.17.2.1

not-accessible

INT linkSelectorCnfgIdx

1.3.6.1.4.1.164.3.2.3.2.17.2.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.

linkSelectorCnfgTable

1.3.6.1.4.1.164.3.2.3.2.17.2

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry.

INT linkSelectorMaxIdleTime

1.3.6.1.4.1.164.3.2.3.2.17.2.1.4

INTEGER

read-write

Move to higher prioritized connected link after this period of seconds of silence on the current link. 0=move immediately to higher prioritized connected link. UNIT is seconds.

INT linkSelectorMinBUSession

1.3.6.1.4.1.164.3.2.3.2.17.2.1.7

INTEGER

read-write

Minimum duration of a backup session before returning to Main Link. Relevant in Backup Mode and when Revert is auto(2). Value 255 is for NEVER which means never return to Main Link. UNIT is minutes.

INT linkSelectorMode

1.3.6.1.4.1.164.3.2.3.2.17.2.1.5

INTEGER

read-write

If the link selector is in mode: backup(2)=then the link with the lower priority will be used in case of failure of the higher priority link, bod(3)=bandwidth on demand or dynamic bandwidth allocation means that links with lower priority will be used whenever additional bandwidth is required.

linkSelectorPLinkEntry

1.3.6.1.4.1.164.3.2.3.2.17.3.1

not-accessible

linkSelectorPLinkTable

1.3.6.1.4.1.164.3.2.3.2.17.3

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry.

INT linkSelectorPrtIdx

1.3.6.1.4.1.164.3.2.3.2.17.2.1.3

INTEGER

read-only

This attribute indicates a unique port number. This port number should be internal port number: higher or equal to linkSeL1(201).

INT linkSelectorRevert

1.3.6.1.4.1.164.3.2.3.2.17.2.1.6

INTEGER

read-write

If the link selector is in mode backup: auto(2)=return automatically to Main link when it is OK. manual(3)=stays connected to backup link.

INT linkSelectorSltIdx

1.3.6.1.4.1.164.3.2.3.2.17.2.1.2

INTEGER

read-only

Slot Index

mapLinkEntry

1.3.6.1.4.1.164.3.3.4.2.1

not-accessible

INT mapLinkId

1.3.6.1.4.1.164.3.1.5.1.1.1

INTEGER

read-only

A unique identifier of the link

INT mapLinkIdx

1.3.6.1.4.1.164.3.3.4.2.1.1

INTEGER

read-only

A unique identifier of the link

INT mapLinkPortIdx

1.3.6.1.4.1.164.3.3.4.2.1.3

INTEGER

read-write

This attribute indicates a unique port number. The valid port number depends on the IO slot no., the installed card type and the port type: outside, inside, SP. In the DXC : - first two digits will be: (IO slot number+10) - last one/two digits will be the port number within the card in odd or even numbers, as follows: * For the outside/external ports, in odd numbers: port1 = 1 port2 = 3 port3 = 5 etc... Example: port2 of IO slot 11 will be: 213 . * The inside/internal ports, in even numbers: port1 = 2 port2 = 4 port3 = 6 etc... Example: port2 of IO slot 11 will be: 214 .

INT mapLinkPrtIdx

1.3.6.1.4.1.164.3.1.5.1.1.3

INTEGER

read-write

This attribute indicates a unique port number.

INT mapLinkSlotIdx

1.3.6.1.4.1.164.3.3.4.2.1.2

INTEGER

read-write

This attribute indicates a unique slot position where the module is inserted.

INT mapLinkSltIdx

1.3.6.1.4.1.164.3.1.5.1.1.2

INTEGER

read-write

This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries clA(3), io6(10)..io12(16) are not valid.

INT mapLinkState

1.3.6.1.4.1.164.3.3.4.2.1.4

INTEGER

read-only

This attribute indicates the status of the link between the two muxes

INT mapLinkStatus

1.3.6.1.4.1.164.3.1.5.1.1.4

INTEGER

read-only

This attribute indicates the status of the link between the two muxes

mapLinkTable

1.3.6.1.4.1.164.3.3.4.2

not-accessible

mapWanGen

1.3.6.1.4.1.164.3.1.5

INT mdlAlarmInvert

1.3.6.1.4.1.164.3.3.2.1.3.1.1.6

INTEGER

read-only

Alarm Invert is : on/off.

INT mdlAlarmMask

1.3.6.1.4.1.164.3.3.2.1.3.1.1.5

INTEGER

read-only

Alarm Mask is : on/off.

INT mdlAlarmsCmprAlarmIdx

1.3.6.1.4.1.164.3.1.3.3.2.1.3

INTEGER

read-only

A unique number to identify an entry in the alarm status table of the agent.

INT mdlAlarmsCmprAlarmSlot

1.3.6.1.4.1.164.3.1.3.3.2.1.2

INTEGER

read-only

This attribute indicates the desired slot position. In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io(16) are not valid.

mdlAlarmsCmprEntry

1.3.6.1.4.1.164.3.1.3.3.2.1

not-accessible

OCT mdlAlarmsCmprObj

1.3.6.1.4.1.164.3.1.3.3.2.1.4

OCTET STRING

read-write

This attribute is the compressed information itself.

mdlAlarmsCmprTable

1.3.6.1.4.1.164.3.1.3.3.2

not-accessible

INT mdlAlarmsCmprVersion

1.3.6.1.4.1.164.3.1.3.3.2.1.1

INTEGER

read-only

This attribute indicates the version of the internal format of the Compressed data

mdlAlr

1.3.6.1.4.1.164.3.3.2.1.3

INT mdlAlrCode

1.3.6.1.4.1.164.3.3.2.1.3.1.1.3

INTEGER

read-only

This object indicates a code related to a specific alarm description. The list of codes and their related descriptions will be sent to NMS request (for display purpose) by alrGenTable.

mdlAlrEntry

1.3.6.1.4.1.164.3.3.2.1.3.1.1

not-accessible

INT mdlAlrIdx

1.3.6.1.4.1.164.3.3.2.1.3.1.1.1

INTEGER

read-only

A unique number to identify an entry in the alarm status table. Users should use the get next function to read this table because the indexes are not consecutive

OCT mdlAlrMask

1.3.6.1.4.1.164.3.3.2.1.3.2.1.2

OCTET STRING

read-write

This object is a mask that indicates which card level alarms are masked. The masked alarms (their bit is set to '1') are neither sent to the manager, nor taken into account for alarm status and LEDs. Bit no. = Alarm code The bits that do not belong to the card level will be 0. This object is applicable only when mdlSAlrMaskAll=off (otherwise all card alarms are masked). Example: When Alarm having the code 8 is masked, the value of this object will be 100 (hex).

mdlAlrMaskEntry

1.3.6.1.4.1.164.3.3.2.1.3.2.1

not-accessible

INT mdlAlrMaskSltIdx

1.3.6.1.4.1.164.3.3.2.1.3.2.1.1

INTEGER

read-only

This attribute indicates the desired slot position. The Kilomux should use enumerated values starting with kmx.

mdlAlrMaskTable

1.3.6.1.4.1.164.3.3.2.1.3.2

not-accessible

The list of card masked alarms.

INT mdlAlrSltIdx

1.3.6.1.4.1.164.3.3.2.1.3.1.1.2

INTEGER

read-only

This attribute indicates the desired slot position. The Kilomux should use enumerated values starting with kmx.

INT mdlAlrState

1.3.6.1.4.1.164.3.3.2.1.3.1.1.4

INTEGER

read-only

This object indicates the card alarm state.

mdlAlrTable

1.3.6.1.4.1.164.3.3.2.1.3.1

not-accessible

The list of card alarms.

INT mdlCCnfgIdx

1.3.6.1.4.1.164.3.1.3.2.1.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg(1..100) being referred. Value 255 specifies the TmpCnfg

INT mdlCConfigIdx

1.3.6.1.4.1.164.3.3.2.1.2.1.1

INTEGER

read-only

This object indicates the Configuration number (1..255) referred. Value of 255 specifies the TmpCnfg (Scratch).

mdlCEntry

1.3.6.1.4.1.164.3.3.2.1.2.1

not-accessible

mdlCl

1.3.6.1.4.1.164.3.3.2.2

mdlClEntry

1.3.6.1.4.1.164.3.3.2.2.1.1

not-accessible

INT mdlClIdx

1.3.6.1.4.1.164.3.3.2.2.1.1.1

INTEGER

read-only

This object indicates the Cl slot referred.

STR mdlClLastFlipCause

1.3.6.1.4.1.164.3.3.2.2.1.1.5

DisplayString

read-only

The cause of last flip.

STR mdlClLastFlipDate

1.3.6.1.4.1.164.3.3.2.2.1.1.3

DisplayString

read-only

Date when last flip occured. The format would be as specified by the sysSDateFormat.

STR mdlClLastFlipTime

1.3.6.1.4.1.164.3.3.2.2.1.1.4

DisplayString

read-only

Time when last flip occured.

INT mdlClSwchStatus

1.3.6.1.4.1.164.3.3.2.2.1.1.2

INTEGER

read-only

This object indicates the status of the switches on the referred DCL card. Each switch is represented by a bit. The status is a sum of 2**n, according to the bits. There are 4 switches: bit 0 SP-PAR (LSB) '1' - Default parameters bit 1 PSWRD '1' - Password=default '0' - Password=user selected bit 2 DB-INIT '1' - DB initiated with default '0' - DB initiated with NVRAM contents bit 3 PC-SP (MSB) '1' - Management by terminal only '0' - Management by NMS Example: If SP-PAR and PSWRD bits are set ('1'), the value will be 3 (2**1 + 2**0). When the status of the switches is unknown, the value of this object will be 255.

mdlClTable

1.3.6.1.4.1.164.3.3.2.2.1

not-accessible

INT mdlCmprCnfgIdx

1.3.6.1.4.1.164.3.1.3.3.1.1.2

INTEGER

read-only

This attribute indicates the configuration to which the Compressed information is related.

mdlCmprEntry

1.3.6.1.4.1.164.3.1.3.3.1.1

not-accessible

OCT mdlCmprObj

1.3.6.1.4.1.164.3.1.3.3.1.1.5

OCTET STRING

read-write

This attribute is the compressed information itself.

INT mdlCmprSltIdx

1.3.6.1.4.1.164.3.1.3.3.1.1.4

INTEGER

read-only

This attribute indicates a unique number of the slot position where the card is inserted. In the ?004 Unit the entries psB(2),clB(4),io6(10)..io(16) are not valid.

mdlCmprTable

1.3.6.1.4.1.164.3.1.3.3.1

not-accessible

INT mdlCmprTypIdx

1.3.6.1.4.1.164.3.1.3.3.1.1.1

INTEGER

read-only

This attribute indicates the Type of the Compressed being referred.

INT mdlCmprVersion

1.3.6.1.4.1.164.3.1.3.3.1.1.3

INTEGER

read-only

This attribute indicates the version of the internal format of the Compressed data

INT mdlCNoOfExternPrt

1.3.6.1.4.1.164.3.1.3.2.1.1.4

INTEGER

read-only

Number of external ports in the programmed card of the specific slot position

INT mdlCNoOfExtPrt

1.3.6.1.4.1.164.3.3.2.1.2.1.4

INTEGER

read-only

Number of external ports in the programmed module of the specific slot position

INT mdlCNoOfInternPrt

1.3.6.1.4.1.164.3.1.3.2.1.1.5

INTEGER

read-only

Number of internal ports in the programmed card of the specific slot position.

INT mdlCNoOfIntPrt

1.3.6.1.4.1.164.3.3.2.1.2.1.5

INTEGER

read-only

Number of internal ports in the programmed module of the specific slot position.

NTF mdlConnectTrap

1.3.6.1.4.1.164.3.3.0.3

This trap is sent when a card is removed.

INT mdlCPrgCardType

1.3.6.1.4.1.164.3.1.3.2.1.1.3

INTEGER

read-write

This attribute indicates the type of card assigned to the specific slot in the common configuration. This object is identical in all the configurations (1..100). Only the TmpCnf(255) may have different value. The write operation is valid only to the TmpCnfg entry.

mdlCPrgEntry

1.3.6.1.4.1.164.3.1.3.2.1.1

not-accessible

mdlCPrgTable

1.3.6.1.4.1.164.3.1.3.2.1

not-accessible

INT mdlCProgCardType

1.3.6.1.4.1.164.3.3.2.1.2.1.3

INTEGER

read-write

This object indicates the card type assigned to the specific slot in the common configuration. This object is identical for all the configurations (1..255). Only the TmpCnf(255) might have a different value. The write operation is valid only for the TmpCnfg entry.

INT mdlCSlotIdx

1.3.6.1.4.1.164.3.3.2.1.2.1.2

INTEGER

read-only

This object indicates a unique number of the slot position in which the module is inserted. The Kilomux should use enumerated values starting with kmx.

INT mdlCSltIdx

1.3.6.1.4.1.164.3.1.3.2.1.1.2

INTEGER

read-only

This attribute indicates a unique number of the slot position where the card is inserted. In the ?004 Unit the entries psB(2),clB(4),io6(10)..io(16) are not valid.

mdlCTable

1.3.6.1.4.1.164.3.3.2.1.2

not-accessible

mdlDacsMux

1.3.6.1.4.1.164.3.3.2

mdlGen

1.3.6.1.4.1.164.3.3.2.1

mdlMux

1.3.6.1.4.1.164.3.2.2

INT mdlPbxFraCnfgIdx

1.3.6.1.4.1.164.3.2.2.1.1.1.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.

INT mdlPbxFraEnhEcho

1.3.6.1.4.1.164.3.2.2.1.1.1.1.3

INTEGER

read-write

Refers to external ports of an analogue module and to the internal ports of the other mvc4 types of modules. ms16(3) means that the four voice ports have enhanced echo of 16ms. ms32(4) means that the two first ports have enhanced echo of 32 ms while the last two ports have no enhanced echo.

INT mdlPbxFraFramerSlot

1.3.6.1.4.1.164.3.2.2.1.1.1.1.8

INTEGER

read-write

Slot where is sitting the Framer.

mdlPbxFramerCnfg

1.3.6.1.4.1.164.3.2.2.1.1

mdlPbxFramerCnfgEntry

1.3.6.1.4.1.164.3.2.2.1.1.1.1

not-accessible

mdlPbxFramerCnfgTable

1.3.6.1.4.1.164.3.2.2.1.1.1

not-accessible

This table contains parameters relevant to a module belonging to a digital voice system, except mdlPbxFraEnhEcho which is relevant also for analog cards.

INT mdlPbxFraSignaling

1.3.6.1.4.1.164.3.2.2.1.1.1.1.9

INTEGER

read-write

Signaling - describes the way the signaling ABCD bits pass from the local extension to the remote extension and vice-versa. endToEnd = the signaling ABCD bits pass without change from local to remote extension. localTermination = the signaling ABCD bits received from the local extension are translated to different ON Hook/OFF Hook bit values and then passed to remote extension. This is relevant when the Local and Remote ON Hook/OFF Hook values are different.

OCT mdlPbxFraSignalMask

1.3.6.1.4.1.164.3.2.2.1.1.1.1.7

OCTET STRING

read-write

In the case of mdlPbxFraSignalMode = userDefined(5), this field defines the 'don't care' A,B,C Bits. D bit is supplied for future versions. Bit 1 = Bit A ON Hook - Local Bit 2 = Bit B ON Hook - Local Bit 3 = Bit C ON Hook - Local Bit 4 = Bit D ON Hook - Local Bit 5 = Bit A OFF Hook - Local Bit 6 = Bit B OFF Hook - Local Bit 7 = Bit C OFF Hook - Local Bit 8 = Bit D OFF Hook - Local Bit 9 = Bit A ON Hook - Remote Bit 10 = Bit B ON Hook - Remote Bit 11 = Bit C ON Hook - Remote Bit 12 = Bit D ON Hook - Remote Bit 13 = Bit A OFF Hook - Remote Bit 14 = Bit B OFF Hook - Remote Bit 15 = Bit C OFF Hook - Remote Bit 16 = Bit D OFF Hook - Remote.

INT mdlPbxFraSignalMode

1.3.6.1.4.1.164.3.2.2.1.1.1.1.5

INTEGER

read-write

Refers to the signaling mode of the Framer module. tieTrunk(2), tieInvert(3), casTrans(4) are standard coding of the signaling protocol. casTrans(4) is Channel Associated Signaling (the signaling is within the channels time slot). ccsTrans(6) is Common Channel Signaling (the signaling is not within the channels time slot). userDefined(5) allows the user to define the signaling protocol he wants. In this case, the next two MIB fields are relevant.

OCT mdlPbxFraSignalVector

1.3.6.1.4.1.164.3.2.2.1.1.1.1.6

OCTET STRING

read-write

In the case of mdlPbxFraSignalMode = userDefined(5), this field defines the A,B,C Bits. D bit is supplied for future versions. Bit 1 = Bit A ON Hook - Local Bit 2 = Bit B ON Hook - Local Bit 3 = Bit C ON Hook - Local Bit 4 = Bit D ON Hook - Local Bit 5 = Bit A OFF Hook - Local Bit 6 = Bit B OFF Hook - Local Bit 7 = Bit C OFF Hook - Local Bit 8 = Bit D OFF Hook - Local Bit 9 = Bit A ON Hook - Remote Bit 10 = Bit B ON Hook - Remote Bit 11 = Bit C ON Hook - Remote Bit 12 = Bit D ON Hook - Remote Bit 13 = Bit A OFF Hook - Remote Bit 14 = Bit B OFF Hook - Remote Bit 15 = Bit C OFF Hook - Remote Bit 16 = Bit D OFF Hook - Remote In conjunction with the Mask, mdlPbxFraSignalMask, it is possible to compute the signal mode.

INT mdlPbxFraSltIdx

1.3.6.1.4.1.164.3.2.2.1.1.1.1.2

INTEGER

read-only

The slot relevant to this module.

INT mdlPbxFraTSGroupAss

1.3.6.1.4.1.164.3.2.2.1.1.1.1.4

INTEGER

read-write

In case of T1 modules: group1=(1,2,3,4), ...., group6=(21,22,23,24) while in case of E1 modules: - If prtExPh1MlLineType=g732sE1 or g732sE1CRC: group1=(1,2,3,4),..,group4=(13,14,15,17), group5=(18,19,20,21),...,group7=(26,27,28,29) group8=(30,31). - If prtExPh1MlLineType=g732nE1 or g732nE1CRC: group1=(1,2,3,4),..,group4=(13,14,15,16), group5=(17,18,19,20),...,group7=(25,26,27,28) group8=(29,30,31).

mdlPs

1.3.6.1.4.1.164.3.3.2.3

mdlPsEntry

1.3.6.1.4.1.164.3.3.2.3.1.1

not-accessible

INT mdlPsIdx

1.3.6.1.4.1.164.3.3.2.3.1.1.1

INTEGER

read-only

This object indicates the PS card referred.

INT mdlPsStatus

1.3.6.1.4.1.164.3.3.2.3.1.1.2

INTEGER

read-only

This object indicates the status of the PS card.

mdlPsTable

1.3.6.1.4.1.164.3.3.2.3.1

not-accessible

INT mdlPsTestResult

1.3.6.1.4.1.164.3.3.2.3.1.1.3

INTEGER

read-only

This object indicates the result of the PS card test. ok (1) - the test passed successfully. f12V (2) - 12V FAIL was detected f5V (3) - 5V FAIL was detected.

INT mdlSActivity

1.3.6.1.4.1.164.3.3.2.1.1.1.9

INTEGER

read-only

notApplicable - when the slot is empty (no module) offline(1) - when the module is not active (redundant) online (2) - when the module is active .

INT mdlSAlarmStatus

1.3.6.1.4.1.164.3.3.2.1.1.1.5

INTEGER

read-only

Indicates the current alarm state only for card level. This object will be set to: - major (3): when there is at least one active (ON) major alarm . - minor (4): when there is no active major alarm, but there is at least one active minor alarm. - off(2): when there is no active (ON) major or minor alarms (since last clear operation).

INT mdlSAlarmStatusAll

1.3.6.1.4.1.164.3.3.2.1.1.1.6

INTEGER

read-only

Indicates the current card alarm state including the lower level: card, port. This object will be set to: - major (3): when there is at least one active (ON) major alarm . - minor (4): when there is no active major alarm, but there is at least one active minor alarm. - off(2): when there is no active (ON) major or minor alarms (since last clear operation).

INT mdlSAlrClearAllCmd

1.3.6.1.4.1.164.3.3.2.1.1.1.11

INTEGER

read-write

Setting this attribute to ON, will enforce a clear operation on card and port level alarms . Upon completion, the value will automatically change to off(2).

INT mdlSAlrClearCmd

1.3.6.1.4.1.164.3.3.2.1.1.1.10

INTEGER

read-write

Setting this attribute to ON, will enforce a clear operation on the card level alarms . Upon completion, the value will automatically change to off(2).

INT mdlSAlrCode

1.3.6.1.4.1.164.3.1.3.1.2.1.4

INTEGER

read-only

A code identifying the alarm of an entry in the alarm status table at card level.

STR mdlSAlrCodeDescription

1.3.6.1.4.1.164.3.1.3.1.2.1.3

DisplayString

read-only

This attribute is a full text description of the alarm . The alarm description includes the following information: alarm code, alarm text, alarm severity, Masked or Inverted flag and counter.

INT mdlSAlrCounter

1.3.6.1.4.1.164.3.1.3.1.2.1.7

INTEGER

read-only

A counter - how many times the alarm occured since last clear operation. ON and OFF Alarm will be counted separately.

mdlSAlrEntry

1.3.6.1.4.1.164.3.1.3.1.2.1

not-accessible

INT mdlSAlrIdx

1.3.6.1.4.1.164.3.1.3.1.2.1.1

INTEGER

read-only

A unique number to identify an entry in the alarm status table. Users should use the get next function to read this table because the indexes are not consecutive.

INT mdlSAlrInvert

1.3.6.1.4.1.164.3.1.3.1.2.1.9

INTEGER

read-only

Alarm invert : on/off.

INT mdlSAlrMask

1.3.6.1.4.1.164.3.1.3.1.2.1.8

INTEGER

read-only

Alarm mask : on/off.

INT mdlSAlrMaskAll

1.3.6.1.4.1.164.3.3.2.1.1.1.12

INTEGER

read-write

on(3) - will cause masking of all the card level alarms. These alarms will not be sent to NMS and will not be taken into account for Alarms Status. off(2) - will unmask all card level alarms except those masked via the mdlAlrMaskTable.

INT mdlSAlrSeverity

1.3.6.1.4.1.164.3.1.3.1.2.1.5

INTEGER

read-only

The severity of the alarm.

INT mdlSAlrSltIdx

1.3.6.1.4.1.164.3.1.3.1.2.1.2

INTEGER

read-only

This attribute indicates the desired slot position. In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io12(16) are not valid.

INT mdlSAlrState

1.3.6.1.4.1.164.3.1.3.1.2.1.6

INTEGER

read-only

State of the alarm.

INT mdlSAlrStatus

1.3.6.1.4.1.164.3.1.3.1.1.1.5

INTEGER

read-only

Indicates the alarm state at module level, i.e. lower level (port alarms) status is not included. This attribute will be set to: critical(7) - when there is at least one active (state ON) critical alarm, otherwise it will be set to major(5) - when there is at least one active (state ON) major alarm, otherwise it will be set to minor(4) - if there is at least one active (state ON) minor alarm, otherwise it will be set to warning(6) - if there is at least one active (state ON) warning alarm, otherwise it will be set to event(3) - if there was at least one alarm event (including state on,off events) since the last clear operation.

INT mdlSAlrStatusAll

1.3.6.1.4.1.164.3.1.3.1.1.1.6

INTEGER

read-only

Indicates the alarm state in the module-all level, i.e. lower level (port alarms) included. This attribute will be set to: critical(7) - when there is at least one active (state ON) critical alarm, otherwise it will be set to major(5) - when there is at least one active (state ON) major alarm, otherwise it will be set to minor(4) - if there is at least one active (state ON) minor alarm, otherwise it will be set to warning(6) - if there is at least one active (state ON) warning alarm, otherwise it will be set to event(3) - if there was at least one alarm event (including state on,off events) since the last clear operation.

mdlSAlrTable

1.3.6.1.4.1.164.3.1.3.1.2

not-accessible

The list of card agent alarms ; includes also an alarm indicating existence of alarms on its ports if there are any.

INT mdlSCardType

1.3.6.1.4.1.164.3.3.2.1.1.1.2

INTEGER

read-only

This attribute indicates the type of the card installed in the specific slot position. Only PS's are possible in the PS slots. Only CL's are possible in the CL slots. Only IO modules are possible in the IO slots. Kmux card type start with the letter k.

INT mdlSClearAllAlrCmd

1.3.6.1.4.1.164.3.1.3.1.1.1.11

INTEGER

read-write

Setting this command to ON, enforces a clear of all the alarms in the given slot, including all its ports alarms. The clear operation will not be applied for masked/inverted alarms.

INT mdlSClearAlrCmd

1.3.6.1.4.1.164.3.1.3.1.1.1.10

INTEGER

read-write

Setting this command to ON, enforces a clear of all the alarms in the given slot, excluding alarms of port level. The clear operation will not be applied for masked/inverted alarms.

INT mdlSCmd

1.3.6.1.4.1.164.3.3.2.1.1.1.13

INTEGER

read-write

General object for any special command at card level. 0=NotApplicable, for cards that don't support this object. For KML.10(ISDN) card of KM-2100, the object will indicate Manual Call Command in Switch mode. It is applicable only when for KML.10, prtIsdnSwitchMode=manual. KML.10 valid values: '1' = noOp, will be used by agents that does not support this feature or object '2' = off, Set call command mode to disconnect state. Disconnects the call. '3' = on, Set call command mode to connect state. Connects the call.

mdlSEntry

1.3.6.1.4.1.164.3.3.2.1.1.1

not-accessible

INT mdlSHwStatus

1.3.6.1.4.1.164.3.3.2.1.1.1.8

INTEGER

read-only

This attribute will be fail(2) when a HW FAIL exists on this module (discovered by periodic self test); otherwise the value will be ok(3).

STR mdlSHwVer

1.3.6.1.4.1.164.3.3.2.1.1.1.3

DisplayString

read-only

This attribute indicates the Hardware version of the card installed in the specific slot position.

STR mdlSHwVersion

1.3.6.1.4.1.164.3.1.3.1.1.1.3

DisplayString

read-only

This attribute indicates the Hardware version of the installed card in the specific slot position.

INT mdlSInstCardType

1.3.6.1.4.1.164.3.1.3.1.1.1.2

INTEGER

read-only

This attribute indicates the type of card installed in the specific slot position. Only PS cards are possible in the PS slots. Only CL cards are possible in the CL slots. Only IO cards are possible in the IO slots.

mdlSInstEntry

1.3.6.1.4.1.164.3.1.3.1.1.1

not-accessible

INT mdlSInstSltIdx

1.3.6.1.4.1.164.3.1.3.1.1.1.1

INTEGER

read-only

A unique number to identify a slot position in the mux. In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io(16) are not valid.

mdlSInstTable

1.3.6.1.4.1.164.3.1.3.1.1

not-accessible

INT mdlSMaskedAlrStat

1.3.6.1.4.1.164.3.1.3.1.1.1.7

INTEGER

read-only

Indicates the alarm state at module level, [i.e. lower level (port alarms) status is not included],including Masked alarms. This attribute will be set to: critical(7) - when there is at least one active (state ON) critical alarm, otherwise it will be set to major(5) - when there is at least one active (state ON) major alarm, otherwise it will be set to minor(4) - if there is at least one active (state ON) minor alarm, otherwise it will be set to warning(6) - if there is at least one active (state ON) warning alarm, otherwise it will be set to event(3) - if there was at least one alarm event (including state on,off events) since the last clear operation.

INT mdlSMaskedAlrStatAll

1.3.6.1.4.1.164.3.1.3.1.1.1.8

INTEGER

read-only

Indicates the alarm state in the module-all level, i.e. lower level (port alarms) included, including Masked alarms. This attribute will be set to: critical(7) - when there is at least one active (state ON) critical alarm, otherwise it will be set to major(5) - when there is at least one active (state ON) major alarm, otherwise it will be set to minor(4) - if there is at least one active (state ON) minor alarm, otherwise it will be set to warning(6) - if there is at least one active (state ON) warning alarm, otherwise it will be set to event(3) - if there was at least one alarm event (including state on,off events) since the last clear operation.

INT mdlSSltIdx

1.3.6.1.4.1.164.3.3.2.1.1.1.1

INTEGER

read-only

A unique number to identify a slot position in the DACS. The Kilomux should use enumerated values starting with kmx.

STR mdlSSwVer

1.3.6.1.4.1.164.3.3.2.1.1.1.4

DisplayString

read-only

This attribute indicates the Software version of the card installed in the specific slot position.

STR mdlSSwVersion

1.3.6.1.4.1.164.3.1.3.1.1.1.4

DisplayString

read-only

This attribute indicates the Software version of the installed card in the specific slot position.

mdlSTable

1.3.6.1.4.1.164.3.3.2.1.1

not-accessible

INT mdlSTestStatus

1.3.6.1.4.1.164.3.3.2.1.1.1.7

INTEGER

read-only

This attribute will be on(3) when there is at least one test running on a port of the module; otherwise the value will be off(2).

INT mdlSTstStatusAll

1.3.6.1.4.1.164.3.1.3.1.1.1.9

INTEGER

read-only

This attribute will be set to on(3) when there is at least one test in progress on a channel of the card, otherwise the value will be off(2).

mdlWanGen

1.3.6.1.4.1.164.3.1.3

mngEntry

1.3.6.1.4.1.164.6.2.7.1

not-accessible

INT mngID

1.3.6.1.4.1.164.6.2.7.1.1

INTEGER

read-only

This value indicates an index of a specific IP address

IP mngIP

1.3.6.1.4.1.164.6.2.7.1.2

IpAddress

read-write

This value indicates the destination address of the traps. IP 0.0.0.0 removes the entry.

IP mngIPMask

1.3.6.1.4.1.164.6.2.7.1.3

IpAddress

read-write

This value indicates the mask of the destination addresses of the traps.

mngTrapIpTable

1.3.6.1.4.1.164.6.2.7

not-accessible

This table indicates the destination address of the traps. Internally it will be limited to ten addresses.

INT mngTrapMask

1.3.6.1.4.1.164.6.2.7.1.4

INTEGER

read-write

The value of this attribute determines the type of traps the agent should mask and not send to this NMS. The value is differently determined for different products. There are mainly two methods: - an integer number, specifying the traps' severity. - a sum of 2**n, where n is a bit assigned to a certain masked trap group. User should consult the product specification, to find out the method employed.

muxHub

1.3.6.1.4.1.164.3.2

INT physicalConnector

1.3.6.1.4.1.164.6.2.15.1.1.2

INTEGER

read-only

The connector of the port/interface. other - none of the specified connectors none - no connector.

physicalConnectorEntry

1.3.6.1.4.1.164.6.2.15.1.1

not-accessible

physicalConnectorTable

1.3.6.1.4.1.164.6.2.15.1

not-accessible

This table includes the connector type of ports or interfaces.

INT pLinkCnfgIdx

1.3.6.1.4.1.164.3.2.3.2.17.3.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.

INT pLinkIdx

1.3.6.1.4.1.164.3.2.3.2.17.3.1.4

INTEGER

read-only

This index is the row number.

INT pLinkPortNu

1.3.6.1.4.1.164.3.2.3.2.17.3.1.6

INTEGER

read-write

The port of the prioritized link. Value 100 is for noConnect.

INT pLinkPrioNu

1.3.6.1.4.1.164.3.2.3.2.17.3.1.7

INTEGER

read-write

The priority of the prioritized link. MIN=1...., MAX=8.

INT pLinkPrtIdx

1.3.6.1.4.1.164.3.2.3.2.17.3.1.3

INTEGER

read-only

This attribute indicates a unique port number. This port number should be the link selector number.

INT pLinkSlotNu

1.3.6.1.4.1.164.3.2.3.2.17.3.1.5

INTEGER

read-write

The slot of the prioritized link. For ISDN BRI ports of MX300/30, io1(5) = isdn1(5) and io2(6) = isdn2(6).

INT pLinkSltIdx

1.3.6.1.4.1.164.3.2.3.2.17.3.1.2

INTEGER

read-only

Slot Index

INT pLinkVRate

1.3.6.1.4.1.164.3.2.3.2.17.3.1.8

INTEGER

read-write

The rate to use with this link.

INT portIdx

1.3.6.1.4.1.164.6.2.15.1.1.1

INTEGER

read-only

This object is an index of the specific port or interface. For a port, the index will be as agreed between agent and application. For an interface, ifIndex may be used.

INT portOptWaveLength

1.3.6.1.4.1.164.6.2.15.1.1.3

INTEGER

read-only

Wave Length of an Optical interface/port in [nm] and specification if Laser or not. notApplicable - for non-optical ports.

INT prtAcmActiveState

1.3.6.1.4.1.164.3.2.3.2.20.1.1.5

INTEGER

read-write

This attribute indicates the Electric Active State of the port.

STR prtAcmAlrString

1.3.6.1.4.1.164.3.2.3.2.20.1.1.6

DisplayString

read-write

Alarm string selected by user for the Inbound ports. This object is applicable only for the Inbound Ports: ext-5..ext-12. For the Outbound Ports (ext-1..ext-4), the size of this string will be 0.

prtAcmCnfg

1.3.6.1.4.1.164.3.2.3.2.20

prtAcmCnfgEntry

1.3.6.1.4.1.164.3.2.3.2.20.1.1

not-accessible

INT prtAcmCnfgIdx

1.3.6.1.4.1.164.3.2.3.2.20.1.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. The write operation is valid only to the TmpCnfg.

prtAcmCnfgTable

1.3.6.1.4.1.164.3.2.3.2.20.1

not-accessible

This is a table for ACM port parameters.

INT prtAcmConnect

1.3.6.1.4.1.164.3.2.3.2.20.1.1.4

INTEGER

read-write

This attribute indicates whether the port should be connected or not. Only a connected port can perform activity.

INT prtAcmPrtIdx

1.3.6.1.4.1.164.3.2.3.2.20.1.1.3

INTEGER

read-only

This attribute indicates a unique port number.

INT prtAcmSltIdx

1.3.6.1.4.1.164.3.2.3.2.20.1.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the module is inserted.

INT prtAgendaBehaviourCnfgIdx

1.3.6.1.4.1.164.3.1.4.2.2.1.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.

prtAgendaBehaviourEntry

1.3.6.1.4.1.164.3.1.4.2.2.1.1

not-accessible

INT prtAgendaBehaviourOnOff

1.3.6.1.4.1.164.3.1.4.2.2.1.1.4

INTEGER

read-write

Setting this command to on(3) enables the agenda function at module (3000) or port (300/30) level.

INT prtAgendaBehaviourPrtIdx

1.3.6.1.4.1.164.3.1.4.2.2.1.1.3

INTEGER

read-only

This parameter should be: - port number for MX300/30 - 100 = N/A for MX3000.

INT prtAgendaBehaviourSltIdx

1.3.6.1.4.1.164.3.1.4.2.2.1.1.2

INTEGER

read-only

This parameter should be: - slot number for MX3000 - 255 = N/A for MX300/30.

prtAgendaBehaviourTable

1.3.6.1.4.1.164.3.1.4.2.2.1

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry.

INT prtAlarmsCmprAlarmIdx

1.3.6.1.4.1.164.3.1.4.3.3.1.4

INTEGER

read-only

A unique number to identify an entry in the alarm status table of the agent.

INT prtAlarmsCmprAlarmPort

1.3.6.1.4.1.164.3.1.4.3.3.1.3

INTEGER

read-only

This attribute indicates a unique identifier of the port the alarm applies to. All the values are valid. No alarms exist for a non-physical port

INT prtAlarmsCmprAlarmSlot

1.3.6.1.4.1.164.3.1.4.3.3.1.2

INTEGER

read-only

This attribute indicates the desired slot position. In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io(16) are not valid. For Stand-alone units, notApplicable(255) will appear.

prtAlarmsCmprEntry

1.3.6.1.4.1.164.3.1.4.3.3.1

not-accessible

OCT prtAlarmsCmprObj

1.3.6.1.4.1.164.3.1.4.3.3.1.5

OCTET STRING

read-only

This attribute is the compressed information itself.

prtAlarmsCmprTable

1.3.6.1.4.1.164.3.1.4.3.3

not-accessible

INT prtAlarmsCmprVersion

1.3.6.1.4.1.164.3.1.4.3.3.1.1

INTEGER

read-only

This attribute indicates the version of the internal format of the Compressed data

prtAlr

1.3.6.1.4.1.164.3.3.3.1.4

OCT prtAlrMask

1.3.6.1.4.1.164.3.3.3.1.4.2.1.2

OCTET STRING

read-write

This object is a mask that indicates which port level alarms are masked. The masked alarms (their bit is set to '1') are neither sent to the manager, nor taken into account for alarm status and LEDs. Bit no. = Alarm code The bits that do not belong to the port level will be 0. This object is applicable only when prtGenAlrMaskAll=off (otherwise all port alarms are masked). Example: When Alarms having the codes 31 and 40 are masked, the value of this object will be 10080000000 (hex).

prtAlrMaskEntry

1.3.6.1.4.1.164.3.3.3.1.4.2.1

not-accessible

INT prtAlrMaskPrtIdx

1.3.6.1.4.1.164.3.3.3.1.4.2.1.1

INTEGER

read-only

This attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outside/external, inside/internal. In the Kilomux, the port index is calculated as follows: 100*Slot+Ch. The external Ch numbers are 1..10, and the internal Ch numbers are 11..20. In the DXC : - first two digits will be: (IO slot number+10) - last one/two digits will be the port number within the card in odd or even numbers, as follows: * For the outside/external ports, in odd numbers: port1 = 1 port2 = 3 port3 = 5 etc... Example: port2 of IO slot 11 will be: 213 . * The inside/internal ports, in even numbers: port1 = 2 port2 = 4 port3 = 6 etc... Example: port2 of IO slot 11 will be: 214 .

prtAlrMaskTable

1.3.6.1.4.1.164.3.3.3.1.4.2

not-accessible

INT prtBertClearCounters

1.3.6.1.4.1.164.3.3.3.1.5.1.10

INTEGER

read-write

Setting this object to ON, will enforce a clear operation of some BERT Counters. Upon completion, the value will automatically change to off(2).

INT prtBertCounter

1.3.6.1.4.1.164.6.2.15.4.1.1.3

INTEGER

read-only

This object indicates the number of BERT errors encountered during the BERT operation. It is valid only when BERT (Bit Error Rate Test) is active on the specific port. The Counter starts from zero (0) anytime BERT is initiated.

prtBertEntry

1.3.6.1.4.1.164.3.3.3.1.5.1

not-accessible

INT prtBertErrorBits

1.3.6.1.4.1.164.3.3.3.1.5.1.9

INTEGER

read-only

How many Error Bits were detected since BERT started to run.

INT prtBertESs

1.3.6.1.4.1.164.3.3.3.1.5.1.7

INTEGER

read-only

How many Errored Seconds were detected since BERT started to run. Counter for Kmux and MP.

INT prtBertInjectErrRateCmd

1.3.6.1.4.1.164.3.3.3.1.5.1.4

INTEGER

read-write

This object controls activation/deactivation of the Error Rate Injection during BERT.

INT prtBertInjectRate

1.3.6.1.4.1.164.3.3.3.1.5.1.3

INTEGER

read-write

This object indicates the error rate injection of the BERT. r10Emx = 10E-x This object is the same for all configurations. single - single error injection. notApplicable - when this object is not supported.

INT prtBertInjectSingleErrCmd

1.3.6.1.4.1.164.3.3.3.1.5.1.5

INTEGER

read-write

This object enables to initiate a Single Error Injection during BERT (on). Upon completion, the value will automatically change to off(2).

INT prtBertPattern

1.3.6.1.4.1.164.3.3.3.1.5.1.2

INTEGER

read-write

This object indicates the pattern of the BERT. p2Exxm1 = 2Exx-1. pxx = pattern xx. This object is the same for all configurations. notApplicable - when this object is not supported.

INT prtBertPrtIdx

1.3.6.1.4.1.164.3.3.3.1.5.1.1

INTEGER

read-only

This attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outside/external, inside/internal. In the Kilomux, the port index is calculated as follows: 100*Slot+Ch. The external Ch numbers are 1..10, and the internal Ch numbers are 11..20. In the DXC : - first two digits will be: (IO slot number+10) - last one/two digits will be the port number within the card in odd or even numbers, as follows: * For the outside/external ports, in odd numbers: port1 = 1 port2 = 3 port3 = 5 etc... Example: port2 of IO slot 11 will be: 213 . * The inside/internal ports, in even numbers: port1 = 2 port2 = 4 port3 = 6 etc... Example: port2 of IO slot 11 will be: 214 . In the MP : - first two digits will be: (IO slot number+10) - last one/two digits will be according to the external port number within the card: exPrt1 -> 1 exPrt2 -> 3 exPrt3 -> 5 exPrt4 -> 7 .

INT prtBertRunTime

1.3.6.1.4.1.164.3.3.3.1.5.1.6

INTEGER

read-only

This object indicates how much time (seconds) passed since BERT started to run.

INT prtBertSyncLoss

1.3.6.1.4.1.164.3.3.3.1.5.1.8

INTEGER

read-only

How many times Sync Loss was detected since BERT started to run. For some products: number of seconds in which Sync Loss occured since BERT started to run. See product specification.

INT prtBertSyncStatus

1.3.6.1.4.1.164.3.3.3.1.5.1.11

INTEGER

read-only

Sync Status while BERT runs.

prtBertTable

1.3.6.1.4.1.164.3.3.3.1.5

not-accessible

This table includes the BERT parameters, counters and commands. The configurable parameters: - prtBertPattern - prtBertInjectRate - prtBertTs are not Set per configuration (same for all Configurations) but start being applied by the Agent only upon successful Update/Download operation. Therefore, Set will enter the values to the Temporary Configuration of the agent, while Get will get the values of the Active Configuration.

OCT prtBertTs

1.3.6.1.4.1.164.3.3.3.1.5.1.12

OCTET STRING

read-write

This object indicates on which TSs of the selected port, BERT should be applied. Each Bit of the Octet represents a TS: 31 ......0 MSB LSB Bit 0 will not be used. If the bit value is '1' - BERT should be applied on this TS. For a T1 port, the valid raised bits ('1') are: 1..25. For an E1 port, the valid raised bits ('1') are: 1..31. Agents that do not support this feature will send SIZE 0.

prtCfgParam

1.3.6.1.4.1.164.3.3.3.1.7

INT prtCfgParamCnfgIdx

1.3.6.1.4.1.164.3.3.3.1.7.1.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.

prtCfgParamEntry

1.3.6.1.4.1.164.3.3.3.1.7.1.1

not-accessible

INT prtCfgParamIdx

1.3.6.1.4.1.164.3.3.3.1.7.1.1.2

INTEGER

read-only

A unique identifier of the port (within the card when applicable). - For KM-2100: Slot*100+Ch external ports: Ch=1..10 internal ports (sub-channels): Ch=11..20. - For FCD-T1/E1: SUB=113, CH1=122, CH2=124.

INT prtCfgParamInbandLoopDetection

1.3.6.1.4.1.164.3.3.3.1.7.1.1.7

INTEGER

read-write

Inband Loop Detection. The field is relevant for the following FCD-T1/E1 ports: SUB, CH1, CH2.

INT prtCfgParamMlAtoMlBPrio

1.3.6.1.4.1.164.3.3.3.1.7.1.1.5

INTEGER

read-write

ML-A to ML-B Priority. The field is relevant only for ML modes of Priority Bumping and Switched Backup.

INT prtCfgParamMlBtoMlAPrio

1.3.6.1.4.1.164.3.3.3.1.7.1.1.6

INTEGER

read-write

ML-B to ML-A Priority. The field is relevant only for ML modes of Priority Bumping.

INT prtCfgParamOperatedMl

1.3.6.1.4.1.164.3.3.3.1.7.1.1.4

INTEGER

read-write

The main link for this channel. The field is relevant only for ML modes of Dual, Priority Bumping and Switched Backup.

INT prtCfgParamSlt

1.3.6.1.4.1.164.3.3.3.1.7.1.1.3

INTEGER

read-only

This attribute indicates a unique number to identify the slot where the card is inserted in. In the 2104 Unit the entries kmxIO5(111)..kmxIO12(118) are not valid. notApplicable(255) - for products that do not have Slots.

prtCfgParamTable

1.3.6.1.4.1.164.3.3.3.1.7.1

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry. Parameters for the channels of the KMUX Cards: KMBE/New, KVF.6 family.

prtClCnfg

1.3.6.1.4.1.164.3.2.3.2.1

INT prtCmprCnfgIdx

1.3.6.1.4.1.164.3.1.4.3.1.1.2

INTEGER

read-only

This attribute indicates the configuration to which the Compressed information is related.

prtCmprEntry

1.3.6.1.4.1.164.3.1.4.3.1.1

not-accessible

OCT prtCmprObj

1.3.6.1.4.1.164.3.1.4.3.1.1.6

OCTET STRING

read-write

This attribute is the compressed information itself.

INT prtCmprPrtIdx

1.3.6.1.4.1.164.3.1.4.3.1.1.5

INTEGER

read-only

This attribute indicates a unique identifier of the port the compressed information relates to. Valid values: exPrt1 (1) .. exPrt12 (12) , inPrt1 (101) .. inPrt48 (148).

INT prtCmprSltIdx

1.3.6.1.4.1.164.3.1.4.3.1.1.4

INTEGER

read-only

This attribute indicates a unique number of the slot position where the card is inserted. In the ?004 Unit the entries psB(2),clB(4),io6(10)..io(16) are not valid.

prtCmprTable

1.3.6.1.4.1.164.3.1.4.3.1

not-accessible

INT prtCmprTypIdx

1.3.6.1.4.1.164.3.1.4.3.1.1.1

INTEGER

read-only

This attribute indicates the Type of the Compressed being referred.

INT prtCmprVersion

1.3.6.1.4.1.164.3.1.4.3.1.1.3

INTEGER

read-only

This attribute indicates the version of the internal format of the Compressed data

prtCnfgAgenda

1.3.6.1.4.1.164.3.1.4.2.2

INT prtCnfgAgendaCnfgIdx

1.3.6.1.4.1.164.3.1.4.2.2.2.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.

INT prtCnfgAgendaDayIdx

1.3.6.1.4.1.164.3.1.4.2.2.2.1.4

INTEGER

read-only

This attribute for which day of the week this row applies.

prtCnfgAgendaEntry

1.3.6.1.4.1.164.3.1.4.2.2.2.1

not-accessible

INT prtCnfgAgendaFrom

1.3.6.1.4.1.164.3.1.4.2.2.2.1.6

INTEGER

read-write

Start from time interval in seconds.

INT prtCnfgAgendaPrtIdx

1.3.6.1.4.1.164.3.1.4.2.2.2.1.3

INTEGER

read-only

This attribute is equal to: -port number for MX300/30 -100 = N/A for MX3000

INT prtCnfgAgendaSesId

1.3.6.1.4.1.164.3.1.4.2.2.2.1.5

INTEGER

read-only

The user may define 4 different active intervals per day.

INT prtCnfgAgendaSltIdx

1.3.6.1.4.1.164.3.1.4.2.2.2.1.2

INTEGER

read-only

This attribute is equal to: -slot number for MX3000 -255 = N/A for MX300/30

prtCnfgAgendaTable

1.3.6.1.4.1.164.3.1.4.2.2.2

not-accessible

This table allows the user to schedule the time a session is active per week basis.

INT prtCnfgAgendaTo

1.3.6.1.4.1.164.3.1.4.2.2.2.1.7

INTEGER

read-write

To time interval in seconds.

INT prtControlCnfg

1.3.6.1.4.1.164.6.2.15.5.1.1.2

INTEGER

read-write

This object may be used for port RW general parameter/s. For detailed meaning, see product's spec. Supported by: PRBi-E3/T3.

CTR prtCrRxDataCells

1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.7

Counter

read-only

The number of Data Cells received by this port during the selected interval.

CTR prtCrRxTotalCells

1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.5

Counter

read-only

The total number of cells received by this port during the selected interval.

prtCrStatis

1.3.6.1.4.1.164.3.1.4.1.3.2

prtCrStatisEntry

1.3.6.1.4.1.164.3.1.4.1.3.2.1.1

not-accessible

INT prtCrStatisInvIdx

1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.3

INTEGER

read-only

The Interval of 15 min. for which the following statistics counters are applicable.

INT prtCrStatisPrtIdx

1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.2

INTEGER

read-only

This attribute indicates a unique port number.

INT prtCrStatisSltIdx

1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.1

INTEGER

read-only

This attribute indicates a unique slot position where the module is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. For stand-alone units this index will be notApplicable (255).

prtCrStatisTable

1.3.6.1.4.1.164.3.1.4.1.3.2.1

not-accessible

This table is applicable only for an active port running a CR protocol .

INT prtCrTimeElapsed

1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.4

INTEGER

read-only

The number of seconds that have elapsed since the beginning of the current error-measurement interval. This object is applicable mainly for the current interval. For other interval: - if data is available: value will be 899. - if data is not available: value will be 0.

CTR prtCrTxDataCells

1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.8

Counter

read-only

The number of Data Cells sent by this port during the selected interval.

CTR prtCrTxTotalCells

1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.6

Counter

read-only

The total number of cells sent by this port during the selected interval.

prtDacsMux

1.3.6.1.4.1.164.3.3.3

INT prtDest

1.3.6.1.4.1.164.3.3.3.5.2.1.4

INTEGER

read-write

Destination port,(of a T1/E1 port), that is connected to the DIM card, for the specified Destination number. 0 = No destination port. Else: For external ports: (IO Slot+10)*10 + 1 for port 1 (IO Slot+10)*10 + 3 for port 2 Example: port2 of IO slot 12 will be: 223 . For internal ports : (IO Slot+10)*10 + 2 for port 1 (IO Slot+10)*10 + 4 for port 2 (IO Slot+10)*10 + 6 for port 3 (IO Slot+10)*10 + 8 for port 4, etc...

INT prtDestCnfgIdx

1.3.6.1.4.1.164.3.3.3.5.2.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg(1..255) being accessed. Idx of 255 relates to the TmpCnfg.

INT prtDestConnect

1.3.6.1.4.1.164.3.3.3.5.2.1.5

INTEGER

read-only

Connection Status of the specified destination number. For a specified destination port, it depends both on the status of the port and on the status of the far-end port. Since this is a RO object, same value will be received for all configurations.

INT prtDestDimIdx

1.3.6.1.4.1.164.3.3.3.5.2.1.2

INTEGER

read-only

This attribute indicates a unique port number of the DIM card. The convention used for DXC: (IO slot number+10)*10 + 1 Example: port1 of IO slot 11 will be: 211 .

INT prtDestIdx

1.3.6.1.4.1.164.3.3.3.5.2.1.3

INTEGER

read-only

This attribute indicates a destination number of the DIM card.

prtDim

1.3.6.1.4.1.164.3.3.3.5

INT prtDimClkMode

1.3.6.1.4.1.164.3.3.3.5.1.1.5

INTEGER

read-write

Clock Mode. smooth - a clock that is not 'pulsed'(has no 'gaps'). In this mode the DXC does NOT receive back the clock signal. extSmooth - same as 'smooth' but in this mode, the DXC receives back the clock signal.

prtDimCnfgEntry

1.3.6.1.4.1.164.3.3.3.5.1.1

not-accessible

The write operation into the Table Objects is valid only for the TmpCnfg entry (prtDimCnfgIdx=255).

INT prtDimCnfgIdx

1.3.6.1.4.1.164.3.3.3.5.1.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg(1..255) being accessed. Idx of 255 relates to the TmpCnfg.

prtDimCnfgTable

1.3.6.1.4.1.164.3.3.3.5.1

not-accessible

prtDimDestEntry

1.3.6.1.4.1.164.3.3.3.5.2.1

not-accessible

The write operation is valid only for the TmpCnfg entry (prtDimDestCnfgIdx=255).

prtDimDestTable

1.3.6.1.4.1.164.3.3.3.5.2

not-accessible

INT prtDimIdx

1.3.6.1.4.1.164.3.3.3.5.1.1.2

INTEGER

read-only

This attribute indicates a unique port number of the DIM card. The convention used for DXC: (IO slot number+10)*10 + 1 Example: port1 of IO slot 11 will be: 211 .

INT prtDimMaxDelay

1.3.6.1.4.1.164.3.3.3.5.1.1.6

INTEGER

read-write

Max Delay permitted between the links, in msec.

INT prtDimMng

1.3.6.1.4.1.164.3.3.3.5.1.1.7

INTEGER

read-write

Use of DIM port for management. disabled - no management on DIM ts1 - 1 bit of TS1 is used for management.

INT prtDimPolarity

1.3.6.1.4.1.164.3.3.3.5.1.1.4

INTEGER

read-write

Polarity.

INT prtDimTxMode

1.3.6.1.4.1.164.3.3.3.5.1.1.3

INTEGER

read-write

Tx mode. regularTx - the links are connected to a similar outfit on the other side. In this mode, if a link fails, the transmitted bandwidth is decreased accordingly. broadcast - the links are connected to MORE than one similar outfit on the other side. In this mode, if a link fails, the transmitted bandwidth is not affected

INT prtDlciCmprCnfgIdx

1.3.6.1.4.1.164.3.1.4.3.2.1.1

INTEGER

read-only

This attribute indicates the configuration to which the Compressed information is related.

INT prtDlciCmprDlciIdx

1.3.6.1.4.1.164.3.1.4.3.2.1.5

INTEGER

read-only

This attribute indicates a unique identifier of the Dlci the compressed information relates to. The values are between 16 - 991.

prtDlciCmprEntry

1.3.6.1.4.1.164.3.1.4.3.2.1

not-accessible

OCT prtDlciCmprObj

1.3.6.1.4.1.164.3.1.4.3.2.1.6

OCTET STRING

read-write

This attribute is the compressed information itself.

INT prtDlciCmprPrtIdx

1.3.6.1.4.1.164.3.1.4.3.2.1.4

INTEGER

read-only

This attribute indicates a unique identifier of the port the compressed information relates to. All the values are valid.

INT prtDlciCmprSltIdx

1.3.6.1.4.1.164.3.1.4.3.2.1.3

INTEGER

read-only

This attribute indicates a unique number of the slot position where the module is inserted. In the ?004 Unit the entries psB(2),clB(4),io6(10)..io(16) are not valid.

prtDlciCmprTable

1.3.6.1.4.1.164.3.1.4.3.2

not-accessible

INT prtDlciCmprVersion

1.3.6.1.4.1.164.3.1.4.3.2.1.2

INTEGER

read-only

This attribute indicates the version of the internal format of the Compressed data

INT prtDlciIdx

1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.3

INTEGER

read-only

This attribute indicates a unique DLCI index for each valid DLCI (16..991).

INT prtDlciPrtIdx

1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.2

INTEGER

read-only

This attribute indicates a unique port number.

CTR prtDlciRxBcViol

1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.14

Counter

read-only

Number of data frames received by this DLCI, exceeding the Burst Committed value.

CTR prtDlciRxBeViol

1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.12

Counter

read-only

Number of data frames received by this DLCI, exceeding the Burst Excess value.

CTR prtDlciRxDcrdCongAllFr

1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.8

Counter

read-only

All the frames discarded due to congestion, received by this DLCI.

CTR prtDlciRxDcrdCongDeFr

1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.6

Counter

read-only

The number of De frames discarded due to congestion, received by this DLCI.

CTR prtDlciRxDeFrames

1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.4

Counter

read-only

The number of De frames received by this DLCI.

INT prtDlciSltIdx

1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.1

INTEGER

read-only

This attribute indicates a unique slot position where the module is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. For stand-alone units this index will be notApplicable (255).

prtDlciStatis

1.3.6.1.4.1.164.3.1.4.1.3.3

prtDlciStatisEntry

1.3.6.1.4.1.164.3.1.4.1.3.3.1.1

not-accessible

prtDlciStatisTable

1.3.6.1.4.1.164.3.1.4.1.3.3.1

not-accessible

This table is applicable only for an active port running an FR, FR+ or CR protocol, with valid DLCIs .

CTR prtDlciTxBcViol

1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.15

Counter

read-only

Number of data frames sent by this DLCI, exceeding the Burst Committed value.

CTR prtDlciTxBecn

1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.11

Counter

read-only

Number of frames sent by this DLCI, indicating backward congestion.

CTR prtDlciTxBeViol

1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.13

Counter

read-only

Number of data frames sent by this DLCI, exceeding the Burst Excess value.

CTR prtDlciTxDcrdCongAllFr

1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.9

Counter

read-only

All the frames discarded due to congestion, sent by this DLCI.

CTR prtDlciTxDcrdCongDeFr

1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.7

Counter

read-only

The number of De frames discarded due to congestion, sent by this DLCI.

CTR prtDlciTxDeFrames

1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.5

Counter

read-only

The number of De frames sent by this DLCI.

CTR prtDlciTxFecn

1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.10

Counter

read-only

Number of frames sent by this DLCI, indicating forward congestion.

prtExClCnfgEntry

1.3.6.1.4.1.164.3.2.3.2.1.1.1

not-accessible

All the entries at this table are identical (have the same value) for all the configurations (1..100) except the TmpCnfg. The write operation into the Table Objects is valid only to the TmpCnfg entry.

INT prtExClCnfgIdx

1.3.6.1.4.1.164.3.2.3.2.1.1.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.

prtExClCnfgTable

1.3.6.1.4.1.164.3.2.3.2.1.1

not-accessible

INT prtExClDataBits

1.3.6.1.4.1.164.3.2.3.2.1.1.1.6

INTEGER

read-only

This attribute indicates the number of data bits in async frame

INT prtExClParity

1.3.6.1.4.1.164.3.2.3.2.1.1.1.7

INTEGER

read-only

This attribute indicates if the parity operation mode in async frame

INT prtExClPrtIdx

1.3.6.1.4.1.164.3.2.3.2.1.1.1.3

INTEGER

read-only

This attribute indicates a unique port number.

INT prtExClRate

1.3.6.1.4.1.164.3.2.3.2.1.1.1.5

INTEGER

read-only

This attribute indicates the operation rate of the port.

INT prtExClRoutingProtocol

1.3.6.1.4.1.164.3.2.3.2.1.1.1.9

INTEGER

read-only

This attribute indicates the routing protocol of the port. When prtExClUsage is nmsSlip or nmsPpp - all values are applicable . Else - only 'none' is applicable.

INT prtExClSltIdx

1.3.6.1.4.1.164.3.2.3.2.1.1.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the card is inserted. Because the second Cl is only for redundancy, all the parameters are identical in the two modules, i.e. change of any parameter in one module will change automatically the value of the other module.. In the ?004 Unit the entry clB(4) is not valid.

INT prtExClStopBits

1.3.6.1.4.1.164.3.2.3.2.1.1.1.8

INTEGER

read-only

This attribute indicates the minimum number of stop bits in the tx async frame

INT prtExClUsage

1.3.6.1.4.1.164.3.2.3.2.1.1.1.4

INTEGER

read-only

This attribute indicates what is the usage of the port.

prtExHs4CnfgEntry

1.3.6.1.4.1.164.3.2.3.2.7.1.1

not-accessible

INT prtExHs4CnfgIdx

1.3.6.1.4.1.164.3.2.3.2.7.1.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg

prtExHs4CnfgTable

1.3.6.1.4.1.164.3.2.3.2.7.1

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry.

INT prtExHs4Connect

1.3.6.1.4.1.164.3.2.3.2.7.1.1.4

INTEGER

read-write

This attribute indicates whether the port should be considered in any of the mux algorithm. It also affects all the module considerations because the card has only one external (physical) interface.

INT prtExHs4IdleCode

1.3.6.1.4.1.164.3.2.3.2.7.1.1.11

INTEGER

read-write

Type value(00 - FF HEX), excluding 0H,8H,10H,12H,21H,24H, 42H,49H,84H,92H

INT prtExHs4LineCode

1.3.6.1.4.1.164.3.2.3.2.7.1.1.6

INTEGER

read-write

This attribute is the line code parameter used for T1/E1 interface. The user should select only the parameters relevant to the specific card: T1 line code parameters for the MPH.1/T1 and E1 line code parameters for the MPH.1/E1. This parameter has the same values as dsx1LineCoding in T1/E1 MIB (RFC-1406). The parameters in dsx1LineCoding are: dsx1JBZS (1) dsx1B8ZS (2) dsx1HDB3 (3) dsx1ZBTSI (4) dsx1AMI (5) other (6)

INT prtExHs4LineLen

1.3.6.1.4.1.164.3.2.3.2.7.1.1.7

INTEGER

read-write

This attribute is the line length parameter used only for T1 interfaces. len399p533ft=len-399-533ft

INT prtExHs4LineType

1.3.6.1.4.1.164.3.2.3.2.7.1.1.5

INTEGER

read-write

This attribute is the line type parameter for T1/E1 interface. The user should select only the parameters relevant to the specific card: T1 line code parameters for the HS-4/1 and E1 line code parameters for the HS-4/2. This parameter has the same values as dsx1LineType in T1/E1 MIB (RFC-1406). The parameters in dsx1LineType are: other (1) dsx1ESF (2) dsx1D4 (3) dsx1E1 (4) dsx1E1-CRC (5) dsx1E1-MF (6) dsx1E1-MF-CRC (7)

INT prtExHs4MfClkSrcPrt

1.3.6.1.4.1.164.3.2.3.2.7.1.1.13

INTEGER

read-write

A unique number to identify a port position in the mux if the MultiFrame clock source is valid (YES). inPrt1 - for MTML-H/E1 cards.

INT prtExHs4MfClkSrcSlt

1.3.6.1.4.1.164.3.2.3.2.7.1.1.12

INTEGER

read-write

This attribute indicates whether the port Tx is multiframe synchronized with Rx multiframe of another port and the slot position of that port. This opration is required in order to bypass signaling of PCM voice channels. When its value is Local(2) there is no meaning to 'prtExHs4MfClkSrcPrt' parameter. In the ?004 Unit the entries io6(10)..io16) are not valid

INT prtExHs4OosCode

1.3.6.1.4.1.164.3.2.3.2.7.1.1.10

INTEGER

read-write

OOS Code

INT prtExHs4OosSig

1.3.6.1.4.1.164.3.2.3.2.7.1.1.9

INTEGER

read-write

Out of Service signal type.

INT prtExHs4PrtIdx

1.3.6.1.4.1.164.3.2.3.2.7.1.1.3

INTEGER

read-only

A unique identifier of the port, within the card.

INT prtExHs4RestoreT

1.3.6.1.4.1.164.3.2.3.2.7.1.1.8

INTEGER

read-write

Time passing from the disappearance of the loss of synchronization condition (red alarm), to the restoration of normal service.

INT prtExHs4SltIdx

1.3.6.1.4.1.164.3.2.3.2.7.1.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the card is inserted.

INT prtExHs4TsCnfgIdx

1.3.6.1.4.1.164.3.2.3.2.7.2.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.

prtExHs4TsCnfgTable

1.3.6.1.4.1.164.3.2.3.2.7.2

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry.

prtExHs4TsEntry

1.3.6.1.4.1.164.3.2.3.2.7.2.1

not-accessible

INT prtExHs4TsIConPrt

1.3.6.1.4.1.164.3.2.3.2.7.2.1.6

INTEGER

read-write

This attribute indicates the internally (In Mux) connected/routed port.

INT prtExHs4TsIConSlot

1.3.6.1.4.1.164.3.2.3.2.7.2.1.5

INTEGER

read-write

This attribute indicates whether the specified time slot is connected/routed internally in the Agent and to which card it is connected. In the ?004 Unit the entries io6(10)..io16) are not valid. split - will be used when the Src TS is connected to more than one slot OR more than one port (each needing less than a whole TS).

INT prtExHs4TsIConTs

1.3.6.1.4.1.164.3.2.3.2.7.2.1.7

INTEGER

read-write

This attribute indicates a unique time slot position. The valid time slots are: 1..24 for T1 Module and 1..31 for E1 interface. In G732S-E1 lines time slot 16 is not valid for data, it is dedicated for multiframe synchronization bits and voice signaling.

INT prtExHs4TsIdx

1.3.6.1.4.1.164.3.2.3.2.7.2.1.4

INTEGER

read-only

This attribute indicates a unique time slot position. The valid time slots are: 1..24 for T1 Card and 1..31 for E1 interface. In G732S-E1 lines, time slot 16 is not valid for data, it is dedicated to multiframe synchronization bits and voice signaling.

INT prtExHs4TsPrtIdx

1.3.6.1.4.1.164.3.2.3.2.7.2.1.3

INTEGER

read-only

This attribute indicates a unique port number. Hs4/T1 and Hs4/T1 cards have only one external interface.

INT prtExHs4TsSltIdx

1.3.6.1.4.1.164.3.2.3.2.7.2.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid

INT prtExHsfClkMode

1.3.6.1.4.1.164.3.2.3.2.6.1.6

INTEGER

read-write

This attribute indicates a unique port operation clock mode.

INT prtExHsfClkPolarity

1.3.6.1.4.1.164.3.2.3.2.6.1.12

INTEGER

read-write

This object indicates the clock polarity. For FCD-M this object will be applicable only for the fixed HS port (the fixed port on the device).

INT prtExHsfConnect

1.3.6.1.4.1.164.3.2.3.2.6.1.4

INTEGER

read-write

This attribute indicates whether the port should be considered in any of the mux algorithms.

INT prtExHsfCts

1.3.6.1.4.1.164.3.2.3.2.6.1.7

INTEGER

read-write

This attribute indicates a unique CTS control line operation mode.

INT prtExHsfFifoSize

1.3.6.1.4.1.164.3.2.3.2.6.1.8

INTEGER

read-write

Size in bits.

INT prtExHsfInbandLoopback

1.3.6.1.4.1.164.3.2.3.2.6.1.11

INTEGER

read-write

This object indicates if Inband Loopback from the Network should be enabled or disabled.

INT prtExHsfLinkTo

1.3.6.1.4.1.164.3.2.3.2.6.1.9

INTEGER

read-write

This attribute indicates a slot of Main Link module, that the port is linked to. This object is the same for all the ports in the specific card because of HW limitations. STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot and prtGenCnfgLinkToPort.

INT prtExHsfOperMode

1.3.6.1.4.1.164.3.2.3.2.6.1.10

INTEGER

read-write

This object indicates the operation mode of the port. normal = bi-directional (Tx/Rx) unidirectRx = unidirectional Rx. broadcast = Tx upon request.

INT prtExHsfRate

1.3.6.1.4.1.164.3.2.3.2.6.1.5

INTEGER

read-write

This attribute indicates the port speed.

INT prtExHsiActType

1.3.6.1.4.1.164.3.2.3.2.8.1.1.8

INTEGER

read-write

It indicates the Activation Type. Activation Type is the Synchronization type towards the PBX. It is applicable only when prtExHsiInterface=nt. notApplicable - for cards that do not support this object, or when prtExHsiInterface is NOT nt.

prtExHsiCnfgEntry

1.3.6.1.4.1.164.3.2.3.2.8.1.1

not-accessible

INT prtExHsiCnfgIdx

1.3.6.1.4.1.164.3.2.3.2.8.1.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg

prtExHsiCnfgTable

1.3.6.1.4.1.164.3.2.3.2.8.1

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry.

INT prtExHsiConnect

1.3.6.1.4.1.164.3.2.3.2.8.1.1.4

INTEGER

read-write

This attribute indicates whether the port should be considered in any of the mux algorithms. v51 - this port is connected to a V5.1 interface. All rest of the values will be 'notApplicable' in this case. V5.1 MIB will be used instead.

INT prtExHsiInterface

1.3.6.1.4.1.164.3.2.3.2.8.1.1.7

INTEGER

read-write

It indicates the interface type: lt = line termination nt = network termination te = terminal equipment. lt1 - for ASMi-31 connection (not ISDN) For HS-U/I and HS-U/1 only 'lt' and 'nt' are applicable. For HS-S , only 'te' and 'nt' are applicable. For HS-U, this object is not applicable. For HS-U6, HS-U12, are applicable: 'lt'=lt-i,'nt'=nt-i, lt1.

INT prtExHsiLinkTo

1.3.6.1.4.1.164.3.2.3.2.8.1.1.6

INTEGER

read-write

It indicates the slot of the main link card to which the HS-? card is mapped. STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot and prtGenCnfgLinkToPort.

INT prtExHsiPrtIdx

1.3.6.1.4.1.164.3.2.3.2.8.1.1.3

INTEGER

read-only

A unique prt identifier within the card.

INT prtExHsiRate

1.3.6.1.4.1.164.3.2.3.2.8.1.1.5

INTEGER

read-write

This attribute indicates the port speed.

INT prtExHsiSltIdx

1.3.6.1.4.1.164.3.2.3.2.8.1.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the card is inserted.

INT prtExHsrClkMode

1.3.6.1.4.1.164.3.2.3.2.10.1.1.11

INTEGER

read-write

Clock mode. This object is applicable for Sync protocol only.

prtExHsrCnfgEntry

1.3.6.1.4.1.164.3.2.3.2.10.1.1

not-accessible

INT prtExHsrCnfgIdx

1.3.6.1.4.1.164.3.2.3.2.10.1.1.1

INTEGER

read-only

This object indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg

prtExHsrCnfgTable

1.3.6.1.4.1.164.3.2.3.2.10.1

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry.

INT prtExHsrConnect

1.3.6.1.4.1.164.3.2.3.2.10.1.1.4

INTEGER

read-write

This object indicates whether the port should be considered in any of the mux algorithms.

INT prtExHsrCts

1.3.6.1.4.1.164.3.2.3.2.10.1.1.10

INTEGER

read-write

CTS. This object is applicable for Async protocol only.

INT prtExHsrDataBits

1.3.6.1.4.1.164.3.2.3.2.10.1.1.7

INTEGER

read-write

Data Bits. This object is applicable for Async protocol only.

INT prtExHsrDcdDsr

1.3.6.1.4.1.164.3.2.3.2.10.1.1.13

INTEGER

read-write

DCD & DSR.

INT prtExHsrLinkTo

1.3.6.1.4.1.164.3.2.3.2.10.1.1.12

INTEGER

read-write

It indicates the slot of the main link card to which the HS-R card is mapped. notApplicable - for HS-U/1 internal ports. STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot and prtGenCnfgLinkToPort.

INT prtExHsrLlbEnable

1.3.6.1.4.1.164.3.2.3.2.10.1.1.16

INTEGER

read-write

Enable/Disable LLB.

INT prtExHsrOperMode

1.3.6.1.4.1.164.3.2.3.2.10.1.1.14

INTEGER

read-write

This object indicates the operation mode of the port. normal = bi-directional (Tx/Rx) unidirectRx = unidirectional Rx. broadcast = Tx upon request.

INT prtExHsrParity

1.3.6.1.4.1.164.3.2.3.2.10.1.1.8

INTEGER

read-write

- For HS-R card, this object indicates if the parity bit is needed or not. Therefore, the 'no' and 'yes; values are applicable. - For HS-S12, HS-U12, the parity type is selected: no, odd, even. This object is applicable for Async protocol only.

INT prtExHsrProtocol

1.3.6.1.4.1.164.3.2.3.2.10.1.1.5

INTEGER

read-write

This object indicates the protocol.

INT prtExHsrPrtIdx

1.3.6.1.4.1.164.3.2.3.2.10.1.1.3

INTEGER

read-only

A unique prt identifier within the card. Valid values: - For HS-R cards: exPrt1 (1) .. exPrt4 (4) - For HS-U/1 cards: inPrt1 (101) .. inPrt4 (104) - For HS-S12, HS-S6, HS-U12, HS-U6 cards: exPrt1 (1) .. exPrt12 (12). This MIB table is used only for LT-1 interface.

INT prtExHsrRate

1.3.6.1.4.1.164.3.2.3.2.10.1.1.6

INTEGER

read-write

This object indicates the port speed. The 16,32,48,56,64 and 128 kbps rates are applicable only for Sync protocol. The 57.6 and 115.2 kbps rates are applicable only for Async protocol.

INT prtExHsrRateAdapt

1.3.6.1.4.1.164.3.2.3.2.10.1.1.18

INTEGER

read-write

Rate Adaptation - takes a low rate and adapts it to 64Kbps. This object specifies the means this adaptation is done by.

INT prtExHsrRlbEnable

1.3.6.1.4.1.164.3.2.3.2.10.1.1.17

INTEGER

read-write

Enable/Disable RLB.

INT prtExHsrRtsDtr

1.3.6.1.4.1.164.3.2.3.2.10.1.1.15

INTEGER

read-write

RTS & DTR.

INT prtExHsrSltIdx

1.3.6.1.4.1.164.3.2.3.2.10.1.1.2

INTEGER

read-only

This object indicates a unique slot position where the card is inserted.

INT prtExHsrStopBits

1.3.6.1.4.1.164.3.2.3.2.10.1.1.9

INTEGER

read-write

This object indicates the minimum number of stop bits in the tx async frame. This object is applicable for Async protocol only.

INT prtExLs2ClkMode

1.3.6.1.4.1.164.3.2.3.2.4.1.1.6

INTEGER

read-write

This attribute indicates a unique port operation clock mode.

prtExLs2CnfgEntry

1.3.6.1.4.1.164.3.2.3.2.4.1.1

not-accessible

INT prtExLs2CnfgIdx

1.3.6.1.4.1.164.3.2.3.2.4.1.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg

prtExLs2CnfgTable

1.3.6.1.4.1.164.3.2.3.2.4.1

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry.

INT prtExLs2Connect

1.3.6.1.4.1.164.3.2.3.2.4.1.1.4

INTEGER

read-write

This attribute indicates whether the port should be considered in any of the mux algorithms.

INT prtExLs2Cts

1.3.6.1.4.1.164.3.2.3.2.4.1.1.7

INTEGER

read-write

CTS.

INT prtExLs2Dcd

1.3.6.1.4.1.164.3.2.3.2.4.1.1.8

INTEGER

read-write

DCD.

INT prtExLs2EnvIdx

1.3.6.1.4.1.164.3.2.3.2.4.1.1.9

INTEGER

read-write

Envelope Index. When prtInLs2EnvAssign=auto, the value is 0 (not applicable).

INT prtExLs2PrtIdx

1.3.6.1.4.1.164.3.2.3.2.4.1.1.3

INTEGER

read-only

This attribute indicates a unique port index. For the Ls2/X.58 exPrt(7)..exPrt(10) are not valid.

INT prtExLs2Rate

1.3.6.1.4.1.164.3.2.3.2.4.1.1.5

INTEGER

read-write

Port rates.

INT prtExLs2SltIdx

1.3.6.1.4.1.164.3.2.3.2.4.1.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid.

INT prtExLs6ClkMode

1.3.6.1.4.1.164.3.2.3.2.13.1.1.7

INTEGER

read-write

This attribute indicates a unique port operation clock mode. It is applicable for Sync protocol only .

prtExLs6CnfgEntry

1.3.6.1.4.1.164.3.2.3.2.13.1.1

not-accessible

INT prtExLs6CnfgIdx

1.3.6.1.4.1.164.3.2.3.2.13.1.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg

prtExLs6CnfgTable

1.3.6.1.4.1.164.3.2.3.2.13.1

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry.

INT prtExLs6Connect

1.3.6.1.4.1.164.3.2.3.2.13.1.1.4

INTEGER

read-write

This attribute indicates whether the port should be considered in any of the mux algorithms.

INT prtExLs6CtrlSignal

1.3.6.1.4.1.164.3.2.3.2.13.1.1.8

INTEGER

read-write

Control Signal.

INT prtExLs6Cts

1.3.6.1.4.1.164.3.2.3.2.13.1.1.10

INTEGER

read-write

This object indicates the CTS control line operation mode.

INT prtExLs6DataBits

1.3.6.1.4.1.164.3.2.3.2.13.1.1.9

INTEGER

read-write

Data Bits. This object is applicable for Async protocol only.

INT prtExLs6LinkToInternal

1.3.6.1.4.1.164.3.2.3.2.13.1.1.11

INTEGER

read-write

This object indicates which internal port of the card, the external port is linked to.

INT prtExLs6Protocol

1.3.6.1.4.1.164.3.2.3.2.13.1.1.5

INTEGER

read-write

This attribute indicates the protocol. async - can be selected only for ports 1-2.

INT prtExLs6PrtIdx

1.3.6.1.4.1.164.3.2.3.2.13.1.1.3

INTEGER

read-only

This attribute indicates a unique port index.

INT prtExLs6Rate

1.3.6.1.4.1.164.3.2.3.2.13.1.1.6

INTEGER

read-write

Port rates in bps. g1 - contains the values : (2)-(6),(9),(12),(16) g2 - contains the values : (7),(10),(14),(19) g3 - contains the values : (8),(11),(13),(15),(17),(18),(20); it is not applicable when using Async protocol. Rates of pair ports (1-2, 3-4, 5-6) must be from the same group.

INT prtExLs6SltIdx

1.3.6.1.4.1.164.3.2.3.2.13.1.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid.

prtExLs6VCnfgEntry

1.3.6.1.4.1.164.3.2.3.2.13.2.1

not-accessible

INT prtExLs6VCnfgIdx

1.3.6.1.4.1.164.3.2.3.2.13.2.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg

prtExLs6VCnfgTable

1.3.6.1.4.1.164.3.2.3.2.13.2

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry.

INT prtExLs6VConnect

1.3.6.1.4.1.164.3.2.3.2.13.2.1.4

INTEGER

read-write

This attribute indicates whether the port should be considered in any of the mux algorithms.

INT prtExLs6VEchoCanceler

1.3.6.1.4.1.164.3.2.3.2.13.2.1.6

INTEGER

read-write

Echo canceler activation.

INT prtExLs6VIfType

1.3.6.1.4.1.164.3.2.3.2.13.2.1.7

INTEGER

read-write

This attribute indicates the interface type of the port. w4wire - is applicable only for E&M port type.

INT prtExLs6VOos

1.3.6.1.4.1.164.3.2.3.2.13.2.1.10

INTEGER

read-write

Out of Service signaling mode.

INT prtExLs6VPrtIdx

1.3.6.1.4.1.164.3.2.3.2.13.2.1.3

INTEGER

read-only

A unique identifier of the port, within the card.

INT prtExLs6VRate

1.3.6.1.4.1.164.3.2.3.2.13.2.1.5

INTEGER

read-write

Rate (bps) used for FAX transmission and Voice coding.

INT prtExLs6VRxGain

1.3.6.1.4.1.164.3.2.3.2.13.2.1.9

INTEGER

read-write

Receive gain in dBm. E&M - values range: -17 .. 2 FXO - values range: -17 .. -1 FXS - values range: -17 .. 2

INT prtExLs6VSltIdx

1.3.6.1.4.1.164.3.2.3.2.13.2.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid.

INT prtExLs6VTxGain

1.3.6.1.4.1.164.3.2.3.2.13.2.1.8

INTEGER

read-write

Transmit gain in dBm. E&M - values range: -17 .. 8 FXO - values range: -16 .. 4 FXS - values range: -13 .. 8

prtExMbeCnfgEntry

1.3.6.1.4.1.164.3.2.3.2.11.1.1

not-accessible

INT prtExMbeCnfgIdx

1.3.6.1.4.1.164.3.2.3.2.11.1.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg

prtExMbeCnfgTable

1.3.6.1.4.1.164.3.2.3.2.11.1

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry.

INT prtExMbeLan

1.3.6.1.4.1.164.3.2.3.2.11.1.1.4

INTEGER

read-write

This attribute indicates whether the MBE port is operated as main or remote bridge.

INT prtExMbePrtIdx

1.3.6.1.4.1.164.3.2.3.2.11.1.1.3

INTEGER

read-only

A unique port identifier within the card.

INT prtExMbeSltIdx

1.3.6.1.4.1.164.3.2.3.2.11.1.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid.

INT prtExPh1MlClkMode

1.3.6.1.4.1.164.3.2.3.2.2.1.1.13

INTEGER

read-write

Defines the clock operation mode of the T1/E1 interface. Ports that are connected to the TDM Buses must be in nodalTiming(3) clock mode.

prtExPh1MlCnfgEntry

1.3.6.1.4.1.164.3.2.3.2.2.1.1

not-accessible

INT prtExPh1MlCnfgIdx

1.3.6.1.4.1.164.3.2.3.2.2.1.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.

prtExPh1MlCnfgTable

1.3.6.1.4.1.164.3.2.3.2.2.1

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry.

INT prtExPh1MlConnect

1.3.6.1.4.1.164.3.2.3.2.2.1.1.4

INTEGER

read-write

This attribute indicates whether the port should be considered in any of the mux algorithms. It also affects all the card considerations because it may indicate that the module has only one physical interface.

INT prtExPh1MlFdlType

1.3.6.1.4.1.164.3.2.3.2.2.1.1.16

INTEGER

read-write

A unique number to identify the side of the FDL operation. Normal: 'response' for the user side and 'command' for the PTT side. Applicable only when working with ESF-T1 link

INT prtExPh1MlIdleCode

1.3.6.1.4.1.164.3.2.3.2.2.1.1.11

INTEGER

read-write

Determines the code for transmission in empty time slots. Type value(00-FFH), Excluding 0H,8H,10H,12H,21H,24H,42H,49H, 84H,92H

INT prtExPh1MlIfType

1.3.6.1.4.1.164.3.2.3.2.2.1.1.24

INTEGER

read-write

Interface type of the port. For T1 - csu, dsu are the valid values For E1 - dsu, ltu are the valid values.

INT prtExPh1MlInbandMng

1.3.6.1.4.1.164.3.2.3.2.2.1.1.17

INTEGER

read-write

A unique number to identify an Inband management over the link.

INT prtExPh1MlInbandMngRate

1.3.6.1.4.1.164.3.2.3.2.2.1.1.18

INTEGER

read-write

A unique number to identify the rate of the Inband management. E1 port - it is not applicable when prtExPh1MlInbandMng selected is off. T1 port - it is not applicable when prtExPh1MlInbandMng selected is off OR fdlOrTs0.

INT prtExPh1MlInbandMngRoutProt

1.3.6.1.4.1.164.3.2.3.2.2.1.1.23

INTEGER

read-write

This attribute indicates the Inband Mng routing protocol of the port.

INT prtExPh1MlLineCode

1.3.6.1.4.1.164.3.2.3.2.2.1.1.6

INTEGER

read-write

This attribute is the line code parameter used for T1/E1 interface. The user should select only the parameters which are relevant to the specific card: T1 line code parameters for MPH.1/T1 E1 line code parameters for MPH.1/E1. This parameter has the same values as dsx1LineCoding in T1/E1 MIB (RFC-1406). The parameters in dsx1LineCoding are: dsx1JBZS (1) dsx1B8ZS (2) dsx1HDB3 (3) dsx1ZBTSI (4) dsx1AMI (5) other (6)

INT prtExPh1MlLineLen

1.3.6.1.4.1.164.3.2.3.2.2.1.1.7

INTEGER

read-write

This attribute is the line length parameter used only for T1/DSU interfaces. lenXXXpXXXft = len-XXX-XXXft.

INT prtExPh1MlLineType

1.3.6.1.4.1.164.3.2.3.2.2.1.1.5

INTEGER

read-write

This attribute is the line type parameter for T1/E1 interface. The user should select only the parameters which are relevant to the specific card: T1 line code parameters for the MPH.1/T1 E1 line code parameters for the MPH.1/E1. This parameter has the same values as dsx1LineType in T1/E1 MIB (RFC-1406). The parameters in dsx1LineType are: other (1) esfT1 dsx1ESF (2) sfT1 dsx1D4 (3) g732nE1 dsx1E1 (4) g732nE1CRC dsx1E1-CRC (5) g732sE1 dsx1E1-MF (6) g732sE1CRC dsx1E1-MF-CRC (7)

INT prtExPh1MlMfClkSrcPrt

1.3.6.1.4.1.164.3.2.3.2.2.1.1.15

INTEGER

read-write

A unique number to identify a port position in the mux. It has no effect when the prtExPh1MlMfClkSrcSlt selected is Local. inPrt1 - for MTML-H/E1 cards.

INT prtExPh1MlMfClkSrcSlt

1.3.6.1.4.1.164.3.2.3.2.2.1.1.14

INTEGER

read-write

This attribute indicates whether the port Tx multiframe is synchronized with Rx multiframe of another port and the slot position of that port. This operation is required in order to bypass signaling of PCM voice channels. Its value is always local(2) when the port isn't connected to any TDM bus. When it's value is local(2) there is no meaning to 'prtExPh1MlMfClkSrcPrt' parameter. In the ?004 Unit the entries io6(10)..io16) are not valid

INT prtExPh1MlPrtIdx

1.3.6.1.4.1.164.3.2.3.2.2.1.1.3

INTEGER

read-only

This attribute indicates a unique port number. MTML-1/E1 and MTML-1/T1 cards have only one external interface. inPrt1 - for MTML-H/E1 cards. exPrt2..exPrt4 - for MTML-4 cards and others.

INT prtExPh1MlRedundPort

1.3.6.1.4.1.164.3.2.3.2.2.1.1.21

INTEGER

read-write

This object indicates the redundacy ML port, coupled with the current ML port (prtExPh1MlPrtIdx). When prtExPh1MlRedundType=none (no ML redundancy) this object will be 'notApplicable'. When value is not 'none', it should be mutual to the redundant ML port. inPrt1 - for MTML-H/E1 cards. exPrt2..exPrt4 - for MTML-4 cards.

INT prtExPh1MlRedundRecTime

1.3.6.1.4.1.164.3.2.3.2.2.1.1.22

INTEGER

read-write

Redundancy Recovery Time (sec). After switching the ML card to the current (prtExPh1MlSltIdx), the next ML switch can be performed only after a minimum time, indicated by this object.

INT prtExPh1MlRedundSlot

1.3.6.1.4.1.164.3.2.3.2.2.1.1.20

INTEGER

read-write

This object indicates the slot containing the redundacy ML card, coupled with the current ML (prtExPh1MlSltIdx). When prtExPh1MlRedundType=none (no ML redundancy) this object will be 'notApplicable'. In the ?004 Unit the entries io6(10)..io12(16) are not valid When value is not 'none', it should be mutual to the redundant ML slot.

INT prtExPh1MlRedundType

1.3.6.1.4.1.164.3.2.3.2.2.1.1.19

INTEGER

read-write

This object determines the ML redundancy type: none - no ML redundacy dualCableAIS - each ML card is connected by a separate dualCableParallelTx cable to the other MUX (two cables connect two MUXes). There are two types of dual redundancy. yCable - Y cable is connected to both ML cards (one cable connects two MUXes). Default=none When only one ML card exists, the type can be only 'none'. The value should be the same for both ML slots.

INT prtExPh1MlRestoreTime

1.3.6.1.4.1.164.3.2.3.2.2.1.1.8

INTEGER

read-write

The time passing from the disappearance of the loss of synchronization condition (red alarm) to the restoration of normal service. The options 1secFast(2) and 10sec62411(3) for E1 interfaces are proprietary implementation of the T1 standard to the E1 interface.

INT prtExPh1MlRxSensitivity

1.3.6.1.4.1.164.3.2.3.2.2.1.1.10

INTEGER

read-write

This attribute is the rx line sensitivity parameter. low26dBm, high36dBm - applicable for T1-CSU shortHaul, longHaul - applicable for MTML-4 cards.

INT prtExPh1MlSltIdx

1.3.6.1.4.1.164.3.2.3.2.2.1.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the module is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid.

INT prtExPh1MlTdmTrunk

1.3.6.1.4.1.164.3.2.3.2.2.1.1.12

INTEGER

read-write

This attribute indicates whether the port is used to transfer TDM cards data and through which Bus.

INT prtExPh1MlTsCnfgIdx

1.3.6.1.4.1.164.3.2.3.2.2.2.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.

prtExPh1MlTsEntry

1.3.6.1.4.1.164.3.2.3.2.2.2.1

not-accessible

OID prtExPh1MlTsExt

1.3.6.1.4.1.164.3.2.3.2.2.2.1.8

OBJECT IDENTIFIER

read-only

A pointer to an extension of this table: prtExTsSplitTable. - If prtExPh1MlTsIConSlot='split', its value should be set to the OBJECT IDENTIFIER of the prtExTsSplitTable, with its relevant CnfgIdx, SltIdx, PrtIdx, TsIdx and 1st TsBit. - If prtExPh1MlTsIConSlot is not 'split', its value should be set to the OBJECT IDENTIFIER { 0 0 }.

INT prtExPh1MlTsIConPrt

1.3.6.1.4.1.164.3.2.3.2.2.2.1.6

INTEGER

read-write

This attribute indicates the internally (In Mux) connected/routed port. For MP, the values will be: { exPrt1 (1) , exPrt2 (2) , exPrt3 (3) , exPrt4 (4) , exPrt5 (5) , exPrt6 (6) , exPrt7 (7) , exPrt8 (8) , exPrt9 (9) , exPrt10 (10) , exPrt11 (11) , exPrt12 (12) , noConnect (100), inPrt1 (101) , inPrt2 (102) , inPrt3 (103) , inPrt4 (104) , inPrt5 (105) , inPrt6 (106) , inPrt7 (107) , inPrt8 (108) , inPrt9 (109) , inPrt10 (110) , inPrt11 (111) , inPrt12 (112) }

INT prtExPh1MlTsIConSlot

1.3.6.1.4.1.164.3.2.3.2.2.2.1.5

INTEGER

read-write

This attribute indicates whether the specified time slot is connected/routed internally in the Agent and to which card it is connected. In the ?004 Unit the entries io6(10)..io16) are not valid. split - will be used when the Src TS is connected to more than one slot OR more than one port (each needing less than a whole TS).

INT prtExPh1MlTsIConTs

1.3.6.1.4.1.164.3.2.3.2.2.2.1.7

INTEGER

read-write

This attribute indicates a unique time slot position. The valid time slots are 1..24 for T1 Card and 1..31 for E1 interface. In G732S-E1 lines time slot 16 is not valid for data, it is dedicated to multiframe synchronization and voice signaling.

INT prtExPh1MlTsIdx

1.3.6.1.4.1.164.3.2.3.2.2.2.1.4

INTEGER

read-only

This attribute indicates a unique time slot position. The valid time slots are 1..24 for T1 Card and 1..31 for E1 interface. In G732S-E1 lines time slot 16 is not valid for data, it is dedicated for multiframe synchronization bits and voice signaling.

INT prtExPh1MlTsPrtIdx

1.3.6.1.4.1.164.3.2.3.2.2.2.1.3

INTEGER

read-only

This attribute indicates a unique port number. MPH.1/E1 and MPH.1/T1 cards have only one external interface. exPrt2 - for ME1-2, MT1-2 and mhsPri cards. exPrt3, exPrt4 - for mhsPri cards. inPrt1 - for MTML-H/E1 cards.

INT prtExPh1MlTsSltIdx

1.3.6.1.4.1.164.3.2.3.2.2.2.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid

prtExPh1MlTsTable

1.3.6.1.4.1.164.3.2.3.2.2.2

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry.

INT prtExPh1MlTxGain

1.3.6.1.4.1.164.3.2.3.2.2.1.1.9

INTEGER

read-write

This attribute is the tx gain parameter used only for T1/CSU interfaces.

INT prtExPhPlCcittCrc

1.3.6.1.4.1.164.3.2.3.2.3.1.1.32

INTEGER

read-write

This object indicates how many Bits are used for CRC (HDLC item).

INT prtExPhPlClkMode

1.3.6.1.4.1.164.3.2.3.2.3.1.1.9

INTEGER

read-write

Clock mode.

INT prtExPhPlCllmMsg

1.3.6.1.4.1.164.3.2.3.2.3.1.1.28

INTEGER

read-write

This object is CLLM Message (if required or not). It determines whether to send (or not) a congestion message when the port is Rx congested. Default = no. This parameter is applicable only for FR and FR+ protocols AND only when prtExPhPlFrMngProt is NOT (notApplicable or none).

INT prtExPhPlClockEncoding

1.3.6.1.4.1.164.3.2.3.2.3.1.1.30

INTEGER

read-write

This object is the Encoding type of the Line. This parameter is applicable only for FR and FR+ protocols.

prtExPhPlCnfgEntry

1.3.6.1.4.1.164.3.2.3.2.3.1.1

not-accessible

INT prtExPhPlCnfgIdx

1.3.6.1.4.1.164.3.2.3.2.3.1.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.

prtExPhPlCnfgTable

1.3.6.1.4.1.164.3.2.3.2.3.1

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry.

INT prtExPhPlCongLevel

1.3.6.1.4.1.164.3.2.3.2.3.1.1.12

INTEGER

read-write

This attribute indicates the level of delayed data in precents of total available dynamic memory, for which the port will start to operate as congested. The resolution of the parameter is 5 percent.

INT prtExPhPlCongResponse

1.3.6.1.4.1.164.3.2.3.2.3.1.1.11

INTEGER

read-write

This attribute indicates how to handle the congestion indication to/from the mux internal connection side (for example transmit/received becn to/from the network). no - do nothing flowControl - translates the congestion indication between the port and the internal connection port according to the definition of the prtInPh1MlFlowControl parameters. The operation is done on both directions. toFlowControl- translates the backward congestion indication received from the internal connection port (normally the network side) to flow control and do nothing in the other direction.

INT prtExPhPlConnect

1.3.6.1.4.1.164.3.2.3.2.3.1.1.4

INTEGER

read-write

This attribute indicates whether the port should be considered in any of the mux algorithms.

INT prtExPhPlConnectionTyp

1.3.6.1.4.1.164.3.2.3.2.3.1.1.8

INTEGER

read-write

This attribute indicates the link connection type. It is required for three reasons: FR/CR Inband management opration (LMI,CLMM...). CIR check. NMS network management. SameNetManaged - indicates network internal line. SameNetMotMana - indicates network internal line, but the remote mux is not managed by the NMS. User - User to Network Interface. OtherNet - Network To Network Interface. PubNet - Access Mux To PubNet Interface.

INT prtExPhPlDataBits

1.3.6.1.4.1.164.3.2.3.2.3.1.1.17

INTEGER

read-write

This attribute indicates the number of data bits in async frame. It is relevant only for Async protocols.

INT prtExPhPlDcdRts

1.3.6.1.4.1.164.3.2.3.2.3.1.1.15

INTEGER

read-write

Protocol may require end to end connect indication over the network. End to end link connection establishment over the FR network will be indicated to the user by using DCD or RTS control signals, depending on the clock mode: DCE or DTE respectively. The options are : - On : DCD(DCE)/RTS(DTE) will be constantly ON no matter if the End to End connection is established or not. - End to End: The DCD(DCE)/RTS(DTE) will be according to the status of the End to End connection.

INT prtExPhPlDcdRtsControlPath

1.3.6.1.4.1.164.3.2.3.2.3.1.1.16

INTEGER

read-write

Protocol may require end to end connect indication over the network. This parameter defines whether to take the user connection status (RTS(DCE)/DCD(DTE)) and forward it to the network side. - on : Transmit active connection to the network regardless the RTS/DCD control lines status. - off: Transmit active connection to the network according to the status of the RTS/DCD pin.

INT prtExPhPlDceClkSrc

1.3.6.1.4.1.164.3.2.3.2.3.1.1.10

INTEGER

read-write

This attribute indicates the source of the clock when working in dce or ext-dce clock mode. notApplicable(1) - is applied for dte(3) and lbt(5) clock modes. When clock mode is dte, the clock source is always external, therefore this object's value is notApplicable. local(2) and nodalTiming(3) - are valid in dce(1), extDce(2) or int(4) clock modes. The recommended clock source is local(2).

INT prtExPhPlDlciCnfgIdx

1.3.6.1.4.1.164.3.2.3.2.3.2.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.

prtExPhPlDlciEntry

1.3.6.1.4.1.164.3.2.3.2.3.2.1

not-accessible

INT prtExPhPlDlciIConDlci

1.3.6.1.4.1.164.3.2.3.2.3.2.1.8

INTEGER

read-write

This attribute indicates a unique internal connection dlci number, the dlci is routed to.

INT prtExPhPlDlciIConPrt

1.3.6.1.4.1.164.3.2.3.2.3.2.1.7

INTEGER

read-write

This attribute indicates a unique port id which the dlci is routed to. clNMS - will be used for NMS SNMP messages. It can be any port of the CL card. This value will be selectable only if prtExPhPlDlciIConSlt='cl' or 'notApplicable'.

INT prtExPhPlDlciIConSlt

1.3.6.1.4.1.164.3.2.3.2.3.2.1.6

INTEGER

read-write

This attribute indicates a unique slot position In the Mux (Agent) where the dlci is routed to. cl - will represent any of the CL slots. This value can be selected for multiple DLCIs of the product. In the ?004 Unit the entries io6(10)..io16) are not valid

INT prtExPhPlDlciIdx

1.3.6.1.4.1.164.3.2.3.2.3.2.1.4

INTEGER

read-only

This attribute indicates a unique index for each possible used dlci(16..991). When the protocol is not Multiplexing protocol, its type is 'user' and the only valid index is 1.

INT prtExPhPlDlciPriority

1.3.6.1.4.1.164.3.2.3.2.3.2.1.13

INTEGER

read-write

This attribute indicates a unique priority of the pcv. 1 is the lowest priority and 8 is the highest priority.

INT prtExPhPlDlciPrtIdx

1.3.6.1.4.1.164.3.2.3.2.3.2.1.3

INTEGER

read-only

This attribute indicates a unique internal port number. PH.1/E1 and PH.1/T1 cards have three internal ports. Stand-alone units may have six such ports.

INT prtExPhPlDlciRxBc

1.3.6.1.4.1.164.3.2.3.2.3.2.1.11

INTEGER

read-write

This attribute indicates a unique Rx committed bandwidth on the user receive line (or at the port transmit line).

INT prtExPhPlDlciRxBe

1.3.6.1.4.1.164.3.2.3.2.3.2.1.12

INTEGER

read-write

This attribute indicates a unique Rx excess bandwidth on the user receive line (or at the port transmit line).

INT prtExPhPlDlciSltIdx

1.3.6.1.4.1.164.3.2.3.2.3.2.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid

INT prtExPhPlDlciStatus

1.3.6.1.4.1.164.3.2.3.2.3.2.1.14

INTEGER

read-only

This attribute indicates the status of the pvc. The status is disconnected(1) when one of the sides is programmed as not connected

prtExPhPlDlciTable

1.3.6.1.4.1.164.3.2.3.2.3.2

not-accessible

The write operation into the Table Objects is valid only at the TmpCnfg entry.

INT prtExPhPlDlciTxBc

1.3.6.1.4.1.164.3.2.3.2.3.2.1.9

INTEGER

read-write

This attribute indicates a unique Tx committed bandwidth on the user transmit line (or at the port receive line).

INT prtExPhPlDlciTxBe

1.3.6.1.4.1.164.3.2.3.2.3.2.1.10

INTEGER

read-write

This attribute indicates a unique Tx excess bandwidth on the user transmit line (or at the port receive line).

INT prtExPhPlDlciValid

1.3.6.1.4.1.164.3.2.3.2.3.2.1.5

INTEGER

read-write

This attribute indicates whether the attributes in this entry are valid or not. The user can add/delete pvc (dlci to dlci connection) by modifing this object

INT prtExPhPlEnqPeriod

1.3.6.1.4.1.164.3.2.3.2.3.1.1.23

INTEGER

read-write

This object is the Status Enquiry Period, in seconds. It determines the frequency of the Status Enquiry message as sent by the FR user side. At the FR network side, it determines the timeout for this message reception. Default = 4 seconds. This parameter is applicable only for FR and FR+ protocols AND only when prtExPhPlFrMngProt is NOT (notApplicable or none).

INT prtExPhPlErrorsThreshold

1.3.6.1.4.1.164.3.2.3.2.3.1.1.26

INTEGER

read-write

This object is the Max Errors. It determines the number of Status Enquiry Errors that occured within the FR sliding window, before this port is considered DOWN (threshold). This parameter is applicable only for FR and FR+ protocols AND only when prtExPhPlFrMngProt is NOT (notApplicable or none).

INT prtExPhPlFlowControl

1.3.6.1.4.1.164.3.2.3.2.3.1.1.14

INTEGER

read-write

This attribute indicates the required flow control betweeen the port and the remote equipment. fecnBecn - is valid only for FR, FR+ and CR protocols. xonXoff,dtrCts - are valid only for Async protocols. speedReduction - is valid only for DLC protocol when the Clock Mode is DCE and the Clock Source is Local.

INT prtExPhPlFrameSeparator

1.3.6.1.4.1.164.3.2.3.2.3.1.1.33

INTEGER

read-write

This object indicates what should be transferred on the line when there are no frames to pass (HDLC item). idles: mean that FF will pass on the line flags: mean that 7E will pass on the line.

INT prtExPhPlFrMngProt

1.3.6.1.4.1.164.3.2.3.2.3.1.1.22

INTEGER

read-write

This object indicates the Frame-Relay management protocol. ansiT1 = ANSI T1.617 Annex D (this is the default value). This parameter is applicable only for FR and FR+ protocols. When prtExPhPlConnectionTyp = sameNetManaged, this object will be RO (internally determined).

INT prtExPhPlFrWindowSize

1.3.6.1.4.1.164.3.2.3.2.3.1.1.25

INTEGER

read-write

This object is the FR Window Size. It determines the number of samplings in the sliding window that counts the errors. This parameter is applicable only for FR and FR+ protocols AND only when prtExPhPlFrMngProt is NOT (notApplicable or none).

INT prtExPhPlFullRptPeriod

1.3.6.1.4.1.164.3.2.3.2.3.1.1.24

INTEGER

read-write

This object is the Full Report Frequency. It determines the number of the Status Enquiry messages sent by the FR user side, before a Full Report Request is sent. The units are : Status Enquiry messages (periods). Valid values: 1 .. 255. 255 = infinite. This parameter is applicable only for FR and FR+ protocols AND only when prtExPhPlFrMngProt is NOT (notApplicable or none).

INT prtExPhPlHRate

1.3.6.1.4.1.164.3.2.3.2.3.1.1.5

INTEGER

read-write

This attribute indicates the port speed for HIGH speed cards. The card has limitations about the maximum sigma channel speeds and about the possible rates for each clock mode . N - The rate is valid for DCE and EXT-DCE Nodal clock mode. L - The rate is valid for DCE and EXT-DCE Local clock mode. E - The rate is valid for DTE External clock mode. 'r9d6KbpsNLE' means rate of 9.6 Kbps ('d'=dot). Note: Some rate attributes have been changed. As the MIB was already released with the old attributes, the names of the options were not changed. The new names + attributes are in a comment. Example: r2048KbpsE (63), -- r2048KbpsNLE

INT prtExPhPlLRate

1.3.6.1.4.1.164.3.2.3.2.3.1.1.6

INTEGER

read-write

This attribute indicates the port speed for LOW speed cards. The card has limitations about the possible rates for each clock mode. N - The rate is valid for DCE and EXT-DCE Nodal clock mode. L - The rate is valid for DCE and EXT-DCE Local clock mode. E - The rate is valid for DTE External clock mode. Note: Some rate attributes have been changed. As the MIB was already released with the old attributes, the names of the options were not changed. The new names + attributes are in a comment. Example: r57600bpsLE (16), -- r57600bpsNLE

INT prtExPhPlLXoff

1.3.6.1.4.1.164.3.2.3.2.3.1.1.21

INTEGER

read-write

This attribute indicates the character used as X-Off to notify receive disable. This parameter is valid only for async protocols. Valid values: 0..255. The value 256 indicates that it's not applicable

INT prtExPhPlLXon

1.3.6.1.4.1.164.3.2.3.2.3.1.1.20

INTEGER

read-write

This attribute indicates the character used as X-On to notify receive enable. This parameter is valid only for async protocols. Valid values: 0..255. The value 256 indicates that it's not applicable

INT prtExPhPlMinSeparators

1.3.6.1.4.1.164.3.2.3.2.3.1.1.31

INTEGER

read-write

Minimum number of bytes separating between two adjacent frames (HDLC item). 0 = notApplicable

INT prtExPhPlModemActivate

1.3.6.1.4.1.164.3.2.3.2.3.3.1.5

INTEGER

read-write

This object indicates whether the Dial Up Modem is activated when the first frame is received or it is always activated. Default: onFirstFrame

INT prtExPhPlModemCallDelay

1.3.6.1.4.1.164.3.2.3.2.3.3.1.8

INTEGER

read-write

Time in Seconds that the device will wait before dialing to the remote device. This feature is mostly used when there is a backup modem to the main link and the main link is down. In this case it is important to prevent the 2 devices from dialing through the backup modems to each other at the same time. It is advised to configure one side with a small call delay and the other side with a large call delay. Legal Values are: 0 - 30, 60, 120, 180, 240, 300, 600, 900, 1200, 1500, 1800 . 65535 sec. means that this parameter is not applicable. Default: 0 sec

INT prtExPhPlModemCnfgIdx

1.3.6.1.4.1.164.3.2.3.2.3.3.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.

prtExPhPlModemEntry

1.3.6.1.4.1.164.3.2.3.2.3.3.1

not-accessible

INT prtExPhPlModemMaxIdleTime

1.3.6.1.4.1.164.3.2.3.2.3.3.1.6

INTEGER

read-write

Max Time allowed in Seconds without any traffic before the line is disconnected. Legal Values are: 1 sec, 2 sec .. 5 sec, 10 sec, 20 sec.. 1 min, 2 min .. 10 min, 15 min, 20 min, 25 min, 30 min. 65535 sec. means that this parameter is not applicable. Default: 1 sec.

INT prtExPhPlModemPrtIdx

1.3.6.1.4.1.164.3.2.3.2.3.3.1.3

INTEGER

read-only

This attribute indicates a unique port number. In case of PH.1 card, only exPrt(1) is valid.

INT prtExPhPlModemSltIdx

1.3.6.1.4.1.164.3.2.3.2.3.3.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid

INT prtExPhPlModemStatus

1.3.6.1.4.1.164.3.2.3.2.3.3.1.4

INTEGER

read-write

This object indicates whether a Dial Up Modem is enabled on this port. Default: disable

prtExPhPlModemTable

1.3.6.1.4.1.164.3.2.3.2.3.3

not-accessible

External Modem Parameters. The write operation into the Table Objects is valid only for the TmpCnfg entry.

INT prtExPhPlModemTimeBtwnCalls

1.3.6.1.4.1.164.3.2.3.2.3.3.1.7

INTEGER

read-write

Minimum Time in Seconds which is required after a call was disconnected. In this time no other call will be initiated from this Modem port even if there were frames transmitted to this port. This time is required for some Modems which have initializations that take a few seconds. Legal Values are: 0 sec. - 30 sec., 1-5 min. 65535 sec. means that this parameter is not applicable. Default: 0 sec

INT prtExPhPlParity

1.3.6.1.4.1.164.3.2.3.2.3.1.1.18

INTEGER

read-write

This attribute indicates the parity operation mode in async frame. It is relevant only for Async protocols.

INT prtExPhPlProtDelayLevel

1.3.6.1.4.1.164.3.2.3.2.3.1.1.29

INTEGER

read-write

This object is the Segmentation in Bytes. In some cases, the enumerated values will mean other segmentation values than specified: Product: MX-3000 MX-3000 MX-300/MX-30 Protocol: FR+ Transparent FR+ ----------------------------------------------------- level 1 50 Bytes 44 Bytes 50 Bytes level 2 158 Bytes 155 Bytes 158 Bytes level 3 266 Bytes 266 Bytes 266 Bytes level 4 376 Bytes 377 Bytes 376 Bytes level 5 484 Bytes 488 Bytes 484 Bytes Defval=level 1 value This parameter is applicable only for FR+ and transparent protocols.

INT prtExPhPlProtocol

1.3.6.1.4.1.164.3.2.3.2.3.1.1.7

INTEGER

read-write

This object indicates the applied protocol.

INT prtExPhPlPrtIdx

1.3.6.1.4.1.164.3.2.3.2.3.1.1.3

INTEGER

read-only

This attribute indicates a unique port number. In case of PH.1 card, only exPrt(1) is valid.

INT prtExPhPlPvcCreateMsg

1.3.6.1.4.1.164.3.2.3.2.3.1.1.27

INTEGER

read-write

This object is Update Message (if required or not). It determines whether a message of a New PVC Creation is requested or not (yes/no). Default = no. This parameter is applicable only for FR and FR+ protocols AND only when prtExPhPlFrMngProt is NOT (notApplicable or none).

INT prtExPhPlSltIdx

1.3.6.1.4.1.164.3.2.3.2.3.1.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid

INT prtExPhPlStopBits

1.3.6.1.4.1.164.3.2.3.2.3.1.1.19

INTEGER

read-write

This attribute indicates the minimum number of stop bits in the tx async frame. It is relevant only for Async protocols.

INT prtExPhPlTc

1.3.6.1.4.1.164.3.2.3.2.3.1.1.13

INTEGER

read-write

This attribute indicates the Tc parameter which is the time period of the sliding window in which the Bc/Be are tested. The value of this parameter is identical for all the ports of a specific card .

INT prtExPVc4AutoFaxMode

1.3.6.1.4.1.164.3.2.3.2.9.1.1.21

INTEGER

read-write

This object indicates if the system will switch automatically to FAX mode when detecting FAX activity. Default=Yes.

prtExPVc4CnfgEntry

1.3.6.1.4.1.164.3.2.3.2.9.1.1

not-accessible

INT prtExPVc4CnfgIdx

1.3.6.1.4.1.164.3.2.3.2.9.1.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg

prtExPVc4CnfgTable

1.3.6.1.4.1.164.3.2.3.2.9.1

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry.

INT prtExPVc4CongLevel

1.3.6.1.4.1.164.3.2.3.2.9.1.1.14

INTEGER

read-write

This object indicates the level of delayed data in precents of total available dynamic memory, for which the port will start to operate as congested. The resolution of the parameter is 5%.

INT prtExPVc4Connect

1.3.6.1.4.1.164.3.2.3.2.9.1.1.5

INTEGER

read-write

This attribute indicates whether the port should be considered in any of the mux algorithms.

INT prtExPVc4DelayStart

1.3.6.1.4.1.164.3.2.3.2.9.1.1.25

INTEGER

read-write

This parameter is used only for Delay Protocol. This is the time that the calling party will wait after sending an Off hook signal and before sending DTMF digits to the called party. The delay values are 100..4000 msec in intervals of 100 msec.

INT prtExPVc4DlciCnfgIdx

1.3.6.1.4.1.164.3.2.3.2.9.2.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.

prtExPVc4DlciEntry

1.3.6.1.4.1.164.3.2.3.2.9.2.1

not-accessible

INT prtExPVc4DlciIConDlci

1.3.6.1.4.1.164.3.2.3.2.9.2.1.7

INTEGER

read-write

This attribute indicates a unique internal connection dlci number, the dlci is routed to.

INT prtExPVc4DlciIConPrt

1.3.6.1.4.1.164.3.2.3.2.9.2.1.6

INTEGER

read-write

This attribute indicates a unique port id which the dlci is routed to.

INT prtExPVc4DlciIConSlt

1.3.6.1.4.1.164.3.2.3.2.9.2.1.5

INTEGER

read-write

This attribute indicates a unique slot position In the Mux (Agent) where the dlci is routed to. In the ?004 Unit the entries io6(10)..io16) are not valid

INT prtExPVc4DlciPriority

1.3.6.1.4.1.164.3.2.3.2.9.2.1.12

INTEGER

read-write

This attribute indicates a unique priority of the pvc. 6 is the lowest priority and 8 is the highest priority.

INT prtExPVc4DlciPrtIdx

1.3.6.1.4.1.164.3.2.3.2.9.2.1.3

INTEGER

read-only

This attribute indicates a unique internal port number. VC4 cards have four external ports.

INT prtExPVc4DlciRxBc

1.3.6.1.4.1.164.3.2.3.2.9.2.1.10

INTEGER

read-write

This attribute indicates a unique Rx committed bandwidth on the user receive line (or at the port transmit line).

INT prtExPVc4DlciRxBe

1.3.6.1.4.1.164.3.2.3.2.9.2.1.11

INTEGER

read-write

This attribute indicates a unique Rx excess bandwidth on the user receive line (or at the port transmit line).

INT prtExPVc4DlciSltIdx

1.3.6.1.4.1.164.3.2.3.2.9.2.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid

INT prtExPVc4DlciStatus

1.3.6.1.4.1.164.3.2.3.2.9.2.1.13

INTEGER

read-only

This attribute indicates the status of the pvc. The status is disconnected(1) when one of the sides is programmed as not connected

prtExPVc4DlciTable

1.3.6.1.4.1.164.3.2.3.2.9.2

not-accessible

The write operation into the Table Objects is valid only at the TmpCnfg entry.

INT prtExPVc4DlciTxBc

1.3.6.1.4.1.164.3.2.3.2.9.2.1.8

INTEGER

read-write

This attribute indicates a unique Tx committed bandwidth on the user transmit line (or at the port receive line).

INT prtExPVc4DlciTxBe

1.3.6.1.4.1.164.3.2.3.2.9.2.1.9

INTEGER

read-write

This attribute indicates a unique Tx excess bandwidth on the user transmit line (or at the port receive line).

INT prtExPVc4DlciValid

1.3.6.1.4.1.164.3.2.3.2.9.2.1.4

INTEGER

read-write

This attribute indicates whether the attributes in this entry are valid or not. The user can add/delete pvc (dlci to dlci connection) by modifing this object

INT prtExPVc4EchoCanceler

1.3.6.1.4.1.164.3.2.3.2.9.1.1.12

INTEGER

read-write

Echo canceler activation.

STR prtExPVc4ExtensionNumber

1.3.6.1.4.1.164.3.2.3.2.9.1.1.17

DisplayString

read-write

This is the extension number of this port. This field is relevant only when the extension type is voice switching and is read only if the port is member of a hunt group.

INT prtExPVc4ExtensionType

1.3.6.1.4.1.164.3.2.3.2.9.1.1.16

INTEGER

read-write

This object indicates the type of extension relevant to this port.

INT prtExPVc4FaxRate

1.3.6.1.4.1.164.3.2.3.2.9.1.1.22

INTEGER

read-write

FAX initial rate. Default=9600 bps.

INT prtExPVc4HuntGroupIdx

1.3.6.1.4.1.164.3.2.3.2.9.1.1.20

INTEGER

read-write

If it belongs to an hunt group, this fields indicates the index of the relevant hunt group. 0 = notApplicable

INT prtExPVc4HuntGroupMb

1.3.6.1.4.1.164.3.2.3.2.9.1.1.19

INTEGER

read-write

This object indicates if this port belongs to an hunt group.

INT prtExPVc4IfType

1.3.6.1.4.1.164.3.2.3.2.9.1.1.6

INTEGER

read-only

This attribute indicates the interface type of the port. eAndM4wires and eAndM2wires - are valid only for E&M port type eAndM4wires - means 2/4 wires fxoGnd and fxoLoop - are valid only for FXO port type fxsGnd and fxsLoop - are valid only for FXS port type e1Framer, e1Slave, t1Framer, t1Slave - are applicable for the mvc4Pbx cards only.

INT prtExPVc4MaxRate

1.3.6.1.4.1.164.3.2.3.2.9.1.1.9

INTEGER

read-write

Voice rate.

INT prtExPVc4Oos

1.3.6.1.4.1.164.3.2.3.2.9.1.1.11

INTEGER

read-write

Handling type, when connection is lost.

INT prtExPVc4OutPulsing

1.3.6.1.4.1.164.3.2.3.2.9.1.1.18

INTEGER

read-write

This field indicates whether to outpulse the received digits. It is notApplicable(1) when the extension type is forceConnect(2).

INT prtExPVc4PrtIdx

1.3.6.1.4.1.164.3.2.3.2.9.1.1.3

INTEGER

read-only

This object indicates the port number in the selected card (slot).

INT prtExPVc4PrtType

1.3.6.1.4.1.164.3.2.3.2.9.1.1.4

INTEGER

read-only

This object indicates the type of the selected port. In Mx 30/300: s0 is for Voice over ISDN.

INT prtExPVc4RxGain

1.3.6.1.4.1.164.3.2.3.2.9.1.1.8

INTEGER

read-write

Reception gain in dBm.

INT prtExPVc4SeizeAck

1.3.6.1.4.1.164.3.2.3.2.9.1.1.23

INTEGER

read-write

This parameter shows whether the device will acknowledge a seize signal (On/Off Hook). When the value is set to yes(3) & the device receives an on/off hook signal it will transmit back an on/off hook signal. When the value is set to no(2) & the device receives an on/off hook signal it will NOT transmit back an on/off hook signal. Example: If Seize Ack Parameter = YES, when the MVC.4 receives a seize signal (Off Hook) from the PBX it will send an Off Hook to the PBX. The Seize Parameter is relevant for all the following cards: MVC-4 MVC-4/E1-Framer MVC-4/T1-DSU-Framer MVC-4/T1-CSU-Framer MVC-4/E1-SLAVE MVC-4/T1-SLAVE Default values: Analog FXS - No (value can't be changed). Analog FXO - Yes (value can't be changed). Analog E&M - No (values NO/YES). Digital E1/T1 Framer & Slave - No.

INT prtExPVc4SignalingProtocol

1.3.6.1.4.1.164.3.2.3.2.9.1.1.24

INTEGER

read-write

The signaling protocol that will be used between the PABX & the voice port. Delay Start Protocol: the line is seized by sending an Off hook signal and after a delay, if the called party is available (On hook) DTMF (Dual Tone Multi Frequency) digits are sent towards the called party. Immediate Start Protocol: the line is seized by sending an Off Hook signal and immediately DTMF digits are sent towards the called party. Wink start protocol: the line is seized by sending an Off Hook signal and then the called party sends a short Off Hook wink signal. Now the calling party starts sending DTMF digits.

INT prtExPVc4SltIdx

1.3.6.1.4.1.164.3.2.3.2.9.1.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the card is inserted.

INT prtExPVc4Tc

1.3.6.1.4.1.164.3.2.3.2.9.1.1.10

INTEGER

read-write

Time interval for CIR control, in seconds. The value will be the same for all cards' ports.

INT prtExPVc4TxGain

1.3.6.1.4.1.164.3.2.3.2.9.1.1.7

INTEGER

read-write

Transmission gain in dBm.

INT prtExPVc4VarDelay

1.3.6.1.4.1.164.3.2.3.2.9.1.1.13

INTEGER

read-write

Maximum variant delay of the FR network, in msec.

INT prtExPVc4WinkMaxDuration

1.3.6.1.4.1.164.3.2.3.2.9.1.1.27

INTEGER

read-write

This parameter is used only for Wink Protocol. Max Duration of the Wink Signal (off hook duration from the called party). Legal values: 40..400 msec in intervals of 10 msec.

INT prtExPVc4WinkMinDuration

1.3.6.1.4.1.164.3.2.3.2.9.1.1.26

INTEGER

read-write

This parameter is used only for Wink Protocol. Min Duration of the Wink Signal (off hook duration from the called party). Legal values: 40..400 msec in intervals of 10 msec.

INT prtExPVc4Wire

1.3.6.1.4.1.164.3.2.3.2.9.1.1.15

INTEGER

read-write

This object indicates the wiring of the E&M port. It is applicable only for E&M card type.

prtExTreCnfgEntry

1.3.6.1.4.1.164.3.2.3.2.12.1.1

not-accessible

INT prtExTreCnfgIdx

1.3.6.1.4.1.164.3.2.3.2.12.1.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg

prtExTreCnfgTable

1.3.6.1.4.1.164.3.2.3.2.12.1

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry.

INT prtExTreLan

1.3.6.1.4.1.164.3.2.3.2.12.1.1.4

INTEGER

read-write

This attribute indicates whether the TRE port is operated as main or remote bridge. Default=remote.

INT prtExTreLanRate

1.3.6.1.4.1.164.3.2.3.2.12.1.1.5

INTEGER

read-write

This attribute indicates the Rate of the TRE port in Mbit/sec. Default-r4M.

INT prtExTrePrtIdx

1.3.6.1.4.1.164.3.2.3.2.12.1.1.3

INTEGER

read-only

A unique port identifier within the card.

INT prtExTreSltIdx

1.3.6.1.4.1.164.3.2.3.2.12.1.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid.

INT prtExTsBit

1.3.6.1.4.1.164.3.1.4.2.1.1.5

INTEGER

read-only

This attribute indicates a unique Bit within the time slot. The valid Bits are: 1..8.

INT prtExTsCnfgIdx

1.3.6.1.4.1.164.3.1.4.2.1.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.

INT prtExTsIConPrt

1.3.6.1.4.1.164.3.1.4.2.1.1.7

INTEGER

read-write

This attribute indicates the internally (In Mux) connected/routed port. For other products' index see their specification.

INT prtExTsIConSlot

1.3.6.1.4.1.164.3.1.4.2.1.1.6

INTEGER

read-write

This attribute indicates whether the specified time slot is connected/routed internally in the Agent and to which card it is connected. In the ?004 Unit the entries io6(10)..io12(16) are not valid. notApplicable - for stand-alone units.

INT prtExTsIdx

1.3.6.1.4.1.164.3.1.4.2.1.1.4

INTEGER

read-only

This attribute indicates a unique time slot position. The valid time slots are: 1..24 for T1 Card and 1..31 for E1 interface. In G732S-E1 lines, time slot 16 is not valid for data, it is dedicated to multiframe synchronization bits and voice signaling.

INT prtExTsPrtIdx

1.3.6.1.4.1.164.3.1.4.2.1.1.3

INTEGER

read-only

This attribute indicates a unique port number. Most ML cards have only one external interface. inPrt1 - for MTML-H/E1 cards. For other products' index see their specification.

INT prtExTsSltIdx

1.3.6.1.4.1.164.3.1.4.2.1.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. notApplicable - for stand-alone units.

prtExTsSplitEntry

1.3.6.1.4.1.164.3.1.4.2.1.1

not-accessible

prtExTsSplitTable

1.3.6.1.4.1.164.3.1.4.2.1

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry.

INT prtExVc2CallEnable

1.3.6.1.4.1.164.3.2.3.2.5.1.14

INTEGER

read-write

This object indicates the Enabled Call direction. notApplicable - for all cards except VC-2/R2. both - incoming + outgoing.

INT prtExVc2CasStd

1.3.6.1.4.1.164.3.2.3.2.5.1.16

INTEGER

read-write

This object indicates the CAS (Channel Associated Signaling) Standard. notApplicable - for all cards except VC-2/R2.

INT prtExVc2CodingLaw

1.3.6.1.4.1.164.3.2.3.2.5.1.8

INTEGER

read-write

This attribute indicates the Method/Law for decoding/encoding the voice information. aLaw(1) is the standard Law for E1 links. uLaw(2) is the standard Law for T1 links. This object is equal for all the ports in the specific module because of HW limitations

INT prtExVc2Connect

1.3.6.1.4.1.164.3.2.3.2.5.1.4

INTEGER

read-write

This attribute indicates whether the port should be considered in any of the mux algorithms.

INT prtExVc2EandMType

1.3.6.1.4.1.164.3.2.3.2.5.1.25

INTEGER

read-write

This is the signaling type on the E&M analog side. The analog signaling includes voltage, no. of pins and other parameters.

INT prtExVc2EchoCanceler

1.3.6.1.4.1.164.3.2.3.2.5.1.17

INTEGER

read-write

Echo canceler activation. notApplicable - for VC-2 and VC-6 cards.

INT prtExVc2Encoding

1.3.6.1.4.1.164.3.2.3.2.5.1.19

INTEGER

read-write

Voice Encoding Mode.

INT prtExVc2IfSignaling

1.3.6.1.4.1.164.3.2.3.2.5.1.23

INTEGER

read-write

This entry is applicable only for VC-6A and VC-6AG cards. Interface Analog Signaling. Must be the same for all card's ports. loopStart - for the usual trunk/phone types. groundStart - for trunks that need Ground signaling (applicable for VC-6AG cards.

INT prtExVc2IfType

1.3.6.1.4.1.164.3.2.3.2.5.1.18

INTEGER

read-write

Interface Type.

INT prtExVc2LinkTo

1.3.6.1.4.1.164.3.2.3.2.5.1.11

INTEGER

read-write

This attribute indicates the slot of the ML card to which the VC card is mapped. STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot and prtGenCnfgLinkToPort.

INT prtExVc2MeterRate

1.3.6.1.4.1.164.3.2.3.2.5.1.22

INTEGER

read-write

This entry is applicable only for VC-6A/FXO and VC-6A/FXS. Meter Rate means rate of Call Meter in Public Phones, in KHz units. Must be the same for all card's ports.

INT prtExVc2Oos

1.3.6.1.4.1.164.3.2.3.2.5.1.10

INTEGER

read-write

This object is equal for all the ports in the specific card because of HW limitations

INT prtExVc2OperMode

1.3.6.1.4.1.164.3.2.3.2.5.1.12

INTEGER

read-write

This object indicates the operation mode of the port. normal = bi-directional (Tx/Rx) unidirectRx = unidirectional Rx. broadcast = Tx upon request.

INT prtExVc2R2Delay

1.3.6.1.4.1.164.3.2.3.2.5.1.15

INTEGER

read-write

This object indicates the R2 Delay. notApplicable - for all cards except VC-2/R2.

INT prtExVc2ReceiveGain

1.3.6.1.4.1.164.3.2.3.2.5.1.6

INTEGER

read-write

Receive gain in dBm. For ports of VC-6A and VC-6AG cards, the units will be 0.1dBm because valid values can be in 0.5dBm steps.

OCT prtExVc2RxBitOutput

1.3.6.1.4.1.164.3.2.3.2.5.1.21

OCTET STRING

read-write

- - - For MP & FCD - - - This object represents 3 parameters by 2 Octets: Spare -MSB nibble, always=0 hex E Lead Output - nibble, Reverse Polarity Output- nibble, Metering Pulse Output -LSB nibble. Each nibble: 0 hex = 0000 = Not Applicable 1 hex = 0001 = Rx A bit 2 hex = 0010 = Rx A bit inverse 3 hex = 0011 = Rx B bit 4 hex = 0100 = Rx B bit inverse 5 hex = 0101 = Rx C bit 6 hex = 0110 = Rx C bit inverse 7 hex = 0111 = Rx D bit 8 hex = 1000 = Rx D bit inverse 9 hex = 1001 = none A-F hex - not used (invalid values) This object will be RO if prtExVc2SigProfile is NOT manual. - - - For WR II - - - This object represents the following 2 parameters in 1 Octet: 1. On/Off hook signaling receive mode from the T1/E1 into the FXS/FXO (MSB nibble 1). 2. E (Ear) Signaling receive mode from the T1/E1 into the E&M (LSB nibble 2). Each nibble: --------------------------------------------------------------------------------------- Value On/Off Hook E (Ear) --------------------------------------------------------------------------------------- 0 hex = 0000 Not Applicable Not Applicable 1 hex = 0001 Rx A bit Rx A bit 2 hex = 0010 Rx A bit inverse Rx A bit inverse 3 hex = 0011 Rx B bit Rx B bit 4 hex = 0100 Rx B bit inverse Rx B bit inverse 5-F hex not used-invalid not Used-invalid Default value: 11

INT prtExVc2SeizeAck

1.3.6.1.4.1.164.3.2.3.2.5.1.24

INTEGER

read-write

This parameter shows whether the device will acknowledge a seize signal (On/Off Hook). When the value is set to yes(3) & the device receives an on/off hook signal it will transmit back an on/off hook signal. When the value is set to no(2) & the device receives an on/off hook signal it will NOT transmit back an on/off hook signal. Default value for WR FXO: no(2).

INT prtExVc2Sig

1.3.6.1.4.1.164.3.2.3.2.5.1.9

INTEGER

read-write

This attribute indicates the method for decoding/encoding the signaling information(on/off hook). noSignaling (1) - not using signaling (only voice). robbedBitMultiFrame(2) - is the standard method for T1 links and proprietary method for E1 links. chAssociatedE1 (3) - is valid only for E1 G.732S links. robbedBitFrame (4) - is proprietary method implimenting 7 bit for the voice and 1 bit dedicated for signaling. This object is equal for all the ports in the specific module because of HW limitations.

INT prtExVc2SigProfile

1.3.6.1.4.1.164.3.2.3.2.5.1.13

INTEGER

read-write

This object indicates the Signaling Profile of the port. notApplicable - for VC-2 family and when prtExVc2Sig=noSignaling(1) p1 = profile 1 p2 = profile 2 p3 = profile 3 p4 = profile 4

INT prtExVc2TransGain

1.3.6.1.4.1.164.3.2.3.2.5.1.5

INTEGER

read-write

Transmit gain in dBm. For ports of VC-6A and VC-6AG cards, the units will be 0.1dBm because valid values can be in 0.5dBm steps.

OCT prtExVc2TxBitCode

1.3.6.1.4.1.164.3.2.3.2.5.1.20

OCTET STRING

read-write

- - - For MP & FCD - - - This object represents 4 parameters, by 2 Octets : Tx D Bit Code-MSB nibble, Tx C Bit Code- nibble, Tx B Bit Code- nibble, Tx A Bit Code-LSB nibble. Each nibble: 0 hex = 0000 = Not Applicable 1 hex = 0001 = M lead 2 hex = 0010 = M lead inverse 3 hex = 0011 = Reverse Polarity 4 hex = 0100 = Metering Pulse 5 hex = 0101 = Forced 1 6 hex = 0110 = Forced 0 7-F hex - not used (invalid values) This object will be RO if prtExVc2SigProfile is NOT manual. - - - For WR II - - - This object represents the following 4 parameters by 2 Octets: 1. On/Off hook signaling transmission mode from the FXS towards the T1/E1 (MSB nibble 1). 2. Default signaling bits that are not in use (nibble 2). 3. Ring Detection signaling transmission mode from the FXO towards the T1/E1(nibble 3). 4. M (Mouth) Signaling transmission mode from the E&M towards the T1/E1(LSB nibble 4). Each nibble: --------------------------------------------------------------------------------------- Value On/Off Hook Default sig. Ring Detect. M (Mouth) --------------------------------------------------------------------------------------- 0 hex = 0000 Not Applicable Not Applicable. Not Applicable Not Applicable 1 hex = 0001 Tx A bit Values 1-3 are Tx A bit Tx A bit 2 hex = 0010 Tx A bit inverse for On/Off Hook Tx A bit inv. Tx A bit inv. 3 hex = 0011 Tx B bit A,B,A Inv,B Inv. Tx B bit Tx B bit 4 hex = 0100 Tx B bit inverse Values 4-7 are Tx B bit inv. Tx B bit inv. 5 hex = 0101 not Used-invalid for On/Off Hook not Used-invalid not Used-invalid 6 hex = 0110 not Used-invalid A, A Inverse. not Used-invalid not Used-invalid 7 hex = 0111 not Used-invalid not Used-invalid not Used-invalid 8 hex = 1000 not Used-invalid Values 8-11 are not Used-invalid not Used-invalid 9 hex = 1001 not Used-invalid for On/Off Hook not Used-invalid not Used-invalid A hex = 1010 not used-invalid B, B Inverse. not Used-invalid not Used-invalid B hex = 1011 not used-invalid The Bits order: not Used-invalid not Used-invalid C-F hex not used-invalid ABCD not Used-invalid not Used-invalid Default value: 11 11

INT prtExVc2Wire

1.3.6.1.4.1.164.3.2.3.2.5.1.7

INTEGER

read-write

This object is equal for all the ports in the specific card because of HW limitations. For FXO & FXS this parameter is not applicable.

prtExVc3CnfgEntry

1.3.6.1.4.1.164.3.2.3.2.14.1.1

not-accessible

INT prtExVc3CnfgIdx

1.3.6.1.4.1.164.3.2.3.2.14.1.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg

prtExVc3CnfgTable

1.3.6.1.4.1.164.3.2.3.2.14.1

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry.

INT prtExVc3Connect

1.3.6.1.4.1.164.3.2.3.2.14.1.1.4

INTEGER

read-write

This attribute indicates whether the port should be considered in any of the mux algorithms.

INT prtExVc3EchoCanceler

1.3.6.1.4.1.164.3.2.3.2.14.1.1.9

INTEGER

read-write

Echo canceler activation. The value will be the same for all the card's external ports.

INT prtExVc3PrtIdx

1.3.6.1.4.1.164.3.2.3.2.14.1.1.3

INTEGER

read-only

A unique identifier of the port, within the card.

INT prtExVc3Rate

1.3.6.1.4.1.164.3.2.3.2.14.1.1.8

INTEGER

read-write

Rate in bps.

INT prtExVc3ReceiveGain

1.3.6.1.4.1.164.3.2.3.2.14.1.1.6

INTEGER

read-write

Receive gain in dBm.

INT prtExVc3SltIdx

1.3.6.1.4.1.164.3.2.3.2.14.1.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid.

INT prtExVc3TransGain

1.3.6.1.4.1.164.3.2.3.2.14.1.1.5

INTEGER

read-write

Transmit gain in dBm.

INT prtExVc3Wire

1.3.6.1.4.1.164.3.2.3.2.14.1.1.7

INTEGER

read-write

This object is equal for all the ports in the specific card because of HW limitations

prtExVcPbxCnfgEntry

1.3.6.1.4.1.164.3.2.3.2.15.1.1

not-accessible

INT prtExVcPbxCnfgIdx

1.3.6.1.4.1.164.3.2.3.2.15.1.1.1

INTEGER

read-only

This object indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg

prtExVcPbxCnfgTable

1.3.6.1.4.1.164.3.2.3.2.15.1

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry.

INT prtExVcPbxConnect

1.3.6.1.4.1.164.3.2.3.2.15.1.1.4

INTEGER

read-write

This object indicates whether the port should be considered in any of the mux algorithms.

INT prtExVcPbxFrame

1.3.6.1.4.1.164.3.2.3.2.15.1.1.8

INTEGER

read-write

This object is the frame parameter for T1/E1 interface. The user should select only the parameters which are relevant to the specific card: T1 values for the VC-PBX/T1 card. E1 values for the VC-PBX/E1 card. notApplicable - for the VC-PBX card. This parameter has the same values as dsx1LineType in T1/E1 MIB (RFC-1406). The parameters in dsx1LineType are: other (1) esfT1 dsx1ESF (2) sfT1 dsx1D4 (3) g732nE1 dsx1E1 (4) g732nE1CRC dsx1E1-CRC (5) g732sE1 dsx1E1-MF (6) g732sE1CRC dsx1E1-MF-CRC (7)

INT prtExVcPbxGroup

1.3.6.1.4.1.164.3.2.3.2.15.1.1.5

INTEGER

read-only

The group object links together several VC-PBX cards, concerning compression of the same input T1/E1 link time-slots. When ports of different slots have the same group, they are linked. When ports have a different group, they are not linked. For VC-PBX/T1 and E1 cards, this object is - their own IO Slot. In the ?004 Unit the entries io6(10)..io12(16) are not valid.

INT prtExVcPbxIdleCode

1.3.6.1.4.1.164.3.2.3.2.15.1.1.14

INTEGER

read-write

Determines the code for transmission in empty time slots. notApplicable - for VC-PBX card .

INT prtExVcPbxLineCode

1.3.6.1.4.1.164.3.2.3.2.15.1.1.10

INTEGER

read-write

This object is the line code parameter used for T1/E1 interface. The user should select only the parameters which are relevant to the specific card: T1 line code parameters for VC-PBX/T1 E1 line code parameters for VC-PBX/E1 notApplicable - for VC-PBX This parameter has the same values as dsx1LineCoding in T1/E1 MIB (RFC-1406). The parameters in dsx1LineCoding are: dsx1JBZS (1) dsx1B8ZS (2) dsx1HDB3 (3) dsx1ZBTSI (4) dsx1AMI (5) other (6)

INT prtExVcPbxLineLength

1.3.6.1.4.1.164.3.2.3.2.15.1.1.11

INTEGER

read-write

This object is the line length parameter. It is applicable only for the VC-PBX/T1 card. notApplicable - for the VC-PBX and VC-PBX/E1 card. lenXXXpXXXft = len-XXX-XXXft.

INT prtExVcPbxLinkTo

1.3.6.1.4.1.164.3.2.3.2.15.1.1.12

INTEGER

read-write

This object indicates the slot of the ML card to which the VC-PBX/T1, VC-PBX/E1 card Transparent TSs are mapped. notApplicable - for VC-PBX card AND for VC-PBX/T1, VC-PBX/E1 cards, when prtExVcPbxTransparent=no . In the ?004 Unit the entries io6(10)..io12(16) are not valid. STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot and prtGenCnfgLinkToPort.

INT prtExVcPbxPrtIdx

1.3.6.1.4.1.164.3.2.3.2.15.1.1.3

INTEGER

read-only

A unique identifier of the port, within the card.

INT prtExVcPbxRestoreTime

1.3.6.1.4.1.164.3.2.3.2.15.1.1.9

INTEGER

read-write

The time passing from the disappearance of the loss of synchronization condition (red alarm) to the restoration of normal service. The options 1secFast(2) and 10sec62411(3) for E1 interfaces are proprietary implementation of the T1 standard to the E1 interface. ccittE1 - is applicable only for VC-PBX/E1 card notApplicable - is applicable for VC-PBX card

INT prtExVcPbxSignalOper

1.3.6.1.4.1.164.3.2.3.2.15.1.1.13

INTEGER

read-write

This object indicates the Signaling Operation of the VC-PBX/T1, VC-PBX/E1 external port. notApplicable - for VC-PBX card normal - all 4 signaling bits are transferred. bEqA - copy the A bit into the B bit. Applicable only for VC-PBX/T1.

INT prtExVcPbxSltIdx

1.3.6.1.4.1.164.3.2.3.2.15.1.1.2

INTEGER

read-only

This object indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid.

INT prtExVcPbxTransparent

1.3.6.1.4.1.164.3.2.3.2.15.1.1.6

INTEGER

read-write

This object indicates whether the Transparent transfer of Time-Slots is required or not. Time-Slots transferred by Transparent, will not be compressed. no - applicable only for VC-PBX/T1 and VC-PBX/E1 cards yes - applicable only for VC-PBX/T1 and VC-PBX/E1 cards notApplicable - only for VC-PBX cards.

INT prtExVcPbxTransSignalTs

1.3.6.1.4.1.164.3.2.3.2.15.1.1.7

INTEGER

read-write

This object specifies the ML Time-Slot dedicated to the signaling of the PABX Transparent TSs. None = 255. When prtExVcPbxTransparent=no this object's value=None (255) When prtExVcPbxTransparent=notApplicable, this object's value=None (255). When prtExVcPbxTransparent=yes: - for VC-PBX/T1 ports, this object's valid values are 1..16 or None (255). - for VC-PBX/E1 ports, this object's value will be 16 or None (255).

INT prtExVcPbxTsCnfgIdx

1.3.6.1.4.1.164.3.2.3.2.15.4.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.

prtExVcPbxTsEntry

1.3.6.1.4.1.164.3.2.3.2.15.4.1

not-accessible

INT prtExVcPbxTsIConPrt

1.3.6.1.4.1.164.3.2.3.2.15.4.1.7

INTEGER

read-write

This attribute indicates the internal VC-PBX port to which this PABX TS is connected for compression. noConnect - when prtExVcPbxTsIConSlot=noConnect.

INT prtExVcPbxTsIConSlot

1.3.6.1.4.1.164.3.2.3.2.15.4.1.6

INTEGER

read-write

The object's io1..io12 values are applicable only when prtExVcPbxTsMode=compressed. Otherwise, its value should be noConnect. This object indicates whether the specified compressed time slot is connected/routed internally in the Agent and to which card it is connected. The valid selectable slots are either the current one, (prtExVcPbxTsSltIdx), or a slot containing a VC-PBX card. In the ?004 Unit the entries io6(10)..io12(16) are not valid.

INT prtExVcPbxTsIdx

1.3.6.1.4.1.164.3.2.3.2.15.4.1.4

INTEGER

read-only

This attribute indicates a unique PABX time slot position. The valid time slots are 1..24 for VC-PBX/T1 and 1..31 for VC-PBX/E1.

INT prtExVcPbxTsMode

1.3.6.1.4.1.164.3.2.3.2.15.4.1.5

INTEGER

read-write

This attribute indicates the usage, process and way of the specific PABX TS towards its destination: unused - the TS is not used (no processing, no destination). compressed - the TS is used, sent for compression to an internal port 1..6 of either the same card or a VC-PBX card of the same group. transparent - the TS is used, no processing, it is sent directly to the ML card the VC-PBX/T1,(E1) is linked to.

INT prtExVcPbxTsPrtIdx

1.3.6.1.4.1.164.3.2.3.2.15.4.1.3

INTEGER

read-only

This attribute indicates a unique port number. VCPBX/E1 and VCPBX/T1 cards have only one external interface.

INT prtExVcPbxTsSltIdx

1.3.6.1.4.1.164.3.2.3.2.15.4.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid

prtExVcPbxTsTable

1.3.6.1.4.1.164.3.2.3.2.15.4

not-accessible

The write operation into the table objects is valid only to the TmpCnfg entry.

prtFrPlusCnfg

1.3.6.1.4.1.164.3.2.3.2.18

prtFrPlusCnfgEntry

1.3.6.1.4.1.164.3.2.3.2.18.1.1

not-accessible

INT prtFrPlusCnfgIdx

1.3.6.1.4.1.164.3.2.3.2.18.1.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.

prtFrPlusCnfgTable

1.3.6.1.4.1.164.3.2.3.2.18.1

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry.

OCT prtFrPlusNotSegmentedPriorities

1.3.6.1.4.1.164.3.2.3.2.18.1.1.4

OCTET STRING

read-write

This parameter is relevant only for FR+ protocol and asks the MXcess NOT to segment data with specified priorities: from LSB: bit 1 is for priority 1, bit 2 is for priority 2, .... till bit 7 for priority 7. - a priority selected to be segmented : its bit will be '0' - a priority not to be segmented : its bit will be '1' Default is 00000000; i.e, segment all priorities.

INT prtFrPlusPrtIdx

1.3.6.1.4.1.164.3.2.3.2.18.1.1.3

INTEGER

read-only

This attribute indicates a unique port number. This port number should be: - for ISDN cards: inPrt1(101)->inPrt50(150) - for MHS1 card : exPrt1(1) - for MHS3, MLS3 cards: exPrt1(1)->exPrt3(3) - for MLS6 cards: exPrt1(1)->exPrt6(6).

INT prtFrPlusSltIdx

1.3.6.1.4.1.164.3.2.3.2.18.1.1.2

INTEGER

read-only

Slot Index. For ISDN BRI Ports of MX300/30, io1(5) = isdn1(5) and io2(6) = isdn2(6).

CTR prtFrRxBcViol

1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.23

Counter

read-only

Number of data frames received by this port during the selected interval, exceeding the Burst Committed value.

CTR prtFrRxBecn

1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.19

Counter

read-only

Number of frames received by this port during the selected interval, indicating backward congestion.

CTR prtFrRxBeViol

1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.21

Counter

read-only

Number of data frames received by this port during the selected interval, exceeding the Burst Excess value.

CTR prtFrRxDcrdCongAllFr

1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.15

Counter

read-only

All the frames discarded due to congestion, received by this port during the selected interval.

CTR prtFrRxDcrdCongDeFr

1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.13

Counter

read-only

The number of De frames discarded due to congestion, received by this port during the selected interval.

CTR prtFrRxDeFrames

1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.11

Counter

read-only

The number of De frames received by this port during the selected interval.

CTR prtFrRxFecn

1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.17

Counter

read-only

Number of frames received by this port during the selected interval, indicating forward congestion.

CTR prtFrRxMngFrames

1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.9

Counter

read-only

The management number of frames received by this port during the selected interval.

CTR prtFrRxTotalBytes

1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.7

Counter

read-only

The total number of bytes received by this port during the selected interval.

CTR prtFrRxTotalFrames

1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.5

Counter

read-only

The total number of frames received by this port during the selected interval.

prtFrStatis

1.3.6.1.4.1.164.3.1.4.1.3.1

prtFrStatisEntry

1.3.6.1.4.1.164.3.1.4.1.3.1.1.1

not-accessible

INT prtFrStatisInvIdx

1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.3

INTEGER

read-only

The Interval of 15 min. for which the following statistics counters are applicable.

INT prtFrStatisPrtIdx

1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.2

INTEGER

read-only

This attribute indicates a unique port number.

INT prtFrStatisSltIdx

1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.1

INTEGER

read-only

This attribute indicates a unique slot position where the module is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. For stand-alone units this index will be notApplicable (255).

prtFrStatisTable

1.3.6.1.4.1.164.3.1.4.1.3.1.1

not-accessible

This table is applicable only for an active port running an FR protocol .

INT prtFrTimeElapsed

1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.4

INTEGER

read-only

The number of seconds that have elapsed since the beginning of the current error-measurement interval. This object is applicable mainly for the current interval. For other interval: - if data is available: value will be 899. - if data is not available: value will be 0.

CTR prtFrTxBcViol

1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.24

Counter

read-only

Number of data frames sent by this port during the selected interval, exceeding the Burst Committed value.

CTR prtFrTxBecn

1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.20

Counter

read-only

Number of frames sent by this port during the selected interval, indicating backward congestion.

CTR prtFrTxBeViol

1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.22

Counter

read-only

Number of data frames sent by this port during the selected interval, exceeding the Burst Excess value.

CTR prtFrTxDcrdCongAllFr

1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.16

Counter

read-only

All the frames discarded due to congestion, sent by this port during the selected interval.

CTR prtFrTxDcrdCongDeFr

1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.14

Counter

read-only

The number of De frames discarded due to congestion, sent by this port during the selected interval.

CTR prtFrTxDeFrames

1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.12

Counter

read-only

The number of De frames sent by this port during the selected interval.

CTR prtFrTxFecn

1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.18

Counter

read-only

Number of frames sent by this port during the selected interval, indicating forward congestion.

CTR prtFrTxMngFrames

1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.10

Counter

read-only

The management number of frames sent by this port during the selected interval.

CTR prtFrTxTotalBytes

1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.8

Counter

read-only

The total number of bytes sent by this port during the selected interval.

CTR prtFrTxTotalFrames

1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.6

Counter

read-only

The total number of frames sent by this port during the selected interval.

prtGen

1.3.6.1.4.1.164.3.3.3.1

INT prtGenActiveStatus

1.3.6.1.4.1.164.3.3.3.1.1.1.5

INTEGER

read-only

This attribute describes the activity status of the port. unknown(1) indicates that the information is not supported. notUsed(2) indicates that the port is not connected according to the active config. offLine(3) indicates that the port is down (not working) due to any problem. onLine (4) indicates that the port is up (working) offLineRedundancy(5) indicates that the port is down because it is a redundant port. onLineRedundancy (6) indicates that this is a redundant port which is up and works as the active link.

INT prtGenAlrClearCmd

1.3.6.1.4.1.164.3.3.3.1.1.1.13

INTEGER

read-write

Setting this attribute to ON, will enforce a clear operation on the port level alarms . Upon completion, the value will automatically change to off(2). noOp - will be used by agents that do not support this feature or object.

INT prtGenAlrMaskAll

1.3.6.1.4.1.164.3.3.3.1.1.1.14

INTEGER

read-write

on(3) - will mask all the alarms of the selected port off(2)- will unmask all alarms of the selected port except the ones selected by the prtAlrMaskTable. noOp - will be used by agents that do not support this feature or object.

INT prtGenAlrStatus

1.3.6.1.4.1.164.3.3.3.1.1.1.6

INTEGER

read-only

Indicates the alarm state at port (ch) agent level. This object will be set to: - major (3): when there is at least one active (ON) major alarm . - minor (4): when there is no active major alarm, but there is at least one active minor alarm. - off(2): when there is no active (ON) major or minor alarms (since last clear operation).

prtGenCnfgEntry

1.3.6.1.4.1.164.3.1.4.2.3.1

not-accessible

INT prtGenCnfgIdx

1.3.6.1.4.1.164.3.1.4.2.3.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. The write operation is valid only to the TmpCnfg.

INT prtGenCnfgLinkToPort

1.3.6.1.4.1.164.3.1.4.2.3.1.5

INTEGER

read-write

This attribute indicates the port in the prtGenCnfgLinkToSlot of the ML card to which the IO port is mapped. For MP: exPrt1 (1) , exPrt2 (2) , exPrt3 (3) , exPrt4 (4) , inPrt1 (101) notApplicable (255)

INT prtGenCnfgLinkToSlot

1.3.6.1.4.1.164.3.1.4.2.3.1.4

INTEGER

read-write

This attribute indicates the slot of the ML card to which the IO port is mapped.

INT prtGenCnfgPortId

1.3.6.1.4.1.164.3.1.4.2.3.1.6

INTEGER

read-write

IO Port Id for V5.1 use. This object is applicable only for part of the PSTN and ISDN IO ports. Generally, 0 is a valid value. Nevertheless, for ports that do not support this object, the value will be: notApplicable= 0

INT prtGenCnfgPrtIdx

1.3.6.1.4.1.164.3.1.4.2.3.1.3

INTEGER

read-only

This attribute indicates a unique external or internal port number. For MP: exPrt1 (1) .. exPrt12 (12) , notApplicable(100), inPrt1 (101) .. inPrt48 (148)

INT prtGenCnfgSltIdx

1.3.6.1.4.1.164.3.1.4.2.3.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the card is inserted.

prtGenCnfgTable

1.3.6.1.4.1.164.3.1.4.2.3

not-accessible

This table allows the user to configure general port parameters.

prtGenEntry

1.3.6.1.4.1.164.3.3.3.1.1.1

not-accessible

INT prtGenExtInt

1.3.6.1.4.1.164.3.3.3.1.1.1.3

INTEGER

read-only

This attribute describes the type of the designated port. Exteral port is a port with a physical connector. Internal port might be of two types, one is a composite port which collects data of a few external ports into a common bandwidth (usually routed trough DS1 link); the other type is internal ports which get only part of external port data (usually a few DS0's). In the Kilomux-2100, the internal(3) value is used for composite channels or sub-channels of an ISDN Ch.

INT prtGenIfIndex

1.3.6.1.4.1.164.3.3.3.1.1.1.4

INTEGER

read-only

This attribute indicates the unique interface number assigned to the port. The specific interface of this attribute is the same as the interface identified by the value of ifindex in MIB-II.If there is no interface for the specific prtIdx, the value will be '7fffffff'h.

STR prtGenInterfaceType

1.3.6.1.4.1.164.3.3.3.1.1.1.12

DisplayString

read-only

This attribute indicates a unique HW interface type of the selected port. Examples: - for T1 cards: DSU, CSU - for E1 cards: DSU, LTU - for HS cards: v35, rs422, x21 etc...

OCT prtGenParamStatus

1.3.6.1.4.1.164.3.3.3.1.1.1.15

OCTET STRING

read-only

This object indicates Status of parameters specific to the selected port. - For a port that has no special status or is supported by prtSExHsfStatTable - 1 Octet: 00hex - For HS cards - 1 octet: Bit 7 (MSB)..Bit 2 = 0 (NA) Bit 0 and 1 indicates RTS control signal state: Bit 1: '1'=active ; '0'=notActive Bit 0 (LSB): '1'=unknown ; '0'=NA - For VC-6, VC-12, VC-12/6 external ports - 1 Octet : Bit 7 (MSB)..Bit 2 = 0 (NA) Bit 1: Tx Signaling '1'=On ; '0'=Off Bit 0 (LSB): Rx Signaling '1'=On ; '0'=Off - For VC-2/R2(FXS) external ports - 1 Octet : Bit - 7 6 5 4 3 2 1 0 |_| |_________| Call Call State Direction Bit 7 (MSB) and Bit 6 : Call Direction 00 - Incoming 01 - Outgoing Bit 5..Bit 0: Call State 000000 - Idle 000001 - Seized 000010 - Both-Way Conflict 000011 - Seizure Ack 000100 - Answered 000101 - Clear Backward 000110 - Clear Forward 000111 - Blocked 001000 - Fault 001001 - Fault 3 001010 - Fault 4 001011 - Fault 5 001100 - Fault 6 001101 - Fault 7 - For ML-20 external port - 3 Octets : - 1 MS Octet will represent the Real Rate used: Bit - 7 6 5 4 3 2 1 0 |___| |_______| spare Rate Valid values: 0..31, meaning 0..31x64Kbps Invalid values: 32..255. - 2 LS Octets will represent the Status of 7 Control Signals: Signal - --- CTS DSR DCD RJ TM DTR RTS Bit - 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 Octet - 2 3 (LS) '---' will always have the value 00 Rest of the Signals (2 bits each) can have the following values: 00=NA ; 01=Unused ; 10=Off ; 11=On - For ML-H/E1, ML-H/1/E1, ML-H/S/E1 internal port - 1 Octet Bit - 7 6 5 4 3 2 1 0 |___________| spare Mode of Operation Mode of Operation: '1'=Central ; '0'=Remote - For KM2100, KVF.5 cards - indicates the status of A and B signaling for each internal channel. 1 Octet: Bit - 7 6 5 4 3 2 1 0 |_____| |_| |_| spare B A Bit 0 (LSB) and Bit 1 : A status Bit 2 and Bit 3 : B status 00 - Off 01 - On 11 - Unknown - For FCD-W, NETWORK and USER ports - 1 Octet Status of Control Signals: '1'=On ; '0'=Off or when not applicable Bit - 7 6 5 4 3 2 1 0 Bit 7 (MSB) - Signal Loss (applicable only for G.703 interface) Bit 6 - CONTROL (applicable only for X.21 interface) Bit 5 - INDICATION (applicable only for X.21 interface) Bit 4 - DSR (applicable only for V.35 interface) Bit 3 - RTS (applicable only for V.35 interface) Bit 2 - CTS (applicable only for V.35 interface) Bit 1 - DTR (applicable only for V.35 interface) Bit 0 - DCD (applicable only for V.35 interface)

prtGenParamTable

1.3.6.1.4.1.164.3.3.3.1.1

not-accessible

INT prtGenPrtIdx

1.3.6.1.4.1.164.3.3.3.1.1.1.1

INTEGER

read-only

This attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outside/external, inside/internal. In the Kilomux, the port index is calculated as follows: 100*Slot+Ch. The external Ch numbers are 1..10, and the internal Ch numbers are 11..20. In the DXC : - first two digits will be: (IO slot number+10) - last one/two digits will be the port number within the card in odd or even numbers, as follows: * For the outside/external ports, in odd numbers: port1 = 1 port2 = 3 port3 = 5 etc... Example: port2 of IO slot 11 will be: 213 . * The inside/internal ports, in even numbers: port1 = 2 port2 = 4 port3 = 6 etc... Example: port2 of IO slot 11 will be: 214 .

INT prtGenSlt

1.3.6.1.4.1.164.3.3.3.1.1.1.2

INTEGER

read-only

This attribute indicates a unique number to identify the slot where the card is inserted in. When the unit is stand-alone, this object is not applicable and 255 will be used. The Kilomux should use the enumerated starting with kmx.

INT prtGenTestCmd

1.3.6.1.4.1.164.3.3.3.1.1.1.9

INTEGER

read-write

Setting this object to a value as detailed furter on (except 0) will initiate a test on the specific port, if the operation is allowed (according to TestMask). If the operation is not allowed, the mux will ignore the operation. The test/s requested will be set according to the respective bit: TEST BIT ----------- --- localLoop 1 remoteLoop 2 bert 3 plb 4 inband 5 prbs 8 loop2-v54 (RLB) 9 loop3-v54 (LLB) 10 Tone injection 13 Tx-plb 14 Tx-llb 15 DTE loop (HSSI) 16 HDSL-Tx-Inband 20 HDSL-Rx-Inband 21 Monitor 22 (test port) User Line Loopback 23 e.g : If the requested value is 3 -> 0000000000000011 -> Bits 1 & 2 are set -> the requested tests are : local-loop remote-loop Setting this object to stop (value=0 ; all bits are 0), will stop all the user requested tests running on the selected port; it will NOT stop the tests initiated by the system.

INT prtGenTestDuration

1.3.6.1.4.1.164.3.3.3.1.2.1.3

INTEGER

read-write

This attribute indicates the maximum duration of executing a test on the specific port. This entry applies to the specified test . The resolution will be a minute, and the maximum duration is limited to 30 minutes . A zero value specifies no time limitation. When the test isn't active the agent initiates this object to 2 min. when the duration is needed and to 0 if it's not required.

prtGenTestDurationEntry

1.3.6.1.4.1.164.3.3.3.1.2.1

not-accessible

prtGenTestDurationTable

1.3.6.1.4.1.164.3.3.3.1.2

not-accessible

INT prtGenTestIdx

1.3.6.1.4.1.164.3.3.3.1.2.1.2

INTEGER

read-only

This attribute indicates the test, the duration refers.

INT prtGenTestMask

1.3.6.1.4.1.164.3.3.3.1.1.1.8

INTEGER

read-only

This is a mask which indicates which tests from the 'prtGenTestCmd' list are allowed for the selected port. If a specific test is allowed, its respective bit will be SET in the mask : TEST BIT ----------- --- localLoop 1 remoteLoop 2 bert 3 plb 4 inband 5 prbs 8 loop2-v54 (RLB) 9 loop3-v54 (LLB) 10 Tone injection 13 Tx-plb 14 Tx-llb 15 DTE loop (HSSI) 16 HDSL-Tx-Inband 20 HDSL-Rx-Inband 21 Monitor 22 (test port) User Line Loopback 23 e.g : If the return value is 3 -> 0000000000000011 -> Bits 1 & 2 are set -> the allowed tests are : local-loop remote-loop

INT prtGenTestPrtIdx

1.3.6.1.4.1.164.3.3.3.1.2.1.1

INTEGER

read-only

This attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outside/external, inside/internal. In the Kilomux, the port index is calculated as follows: 100*Slot+Ch. The external Ch numbers are 1..10, and the internal Ch numbers are 11..20. In the DXC : - first two digits will be: (IO slot number+10) - last one/two digits will be the port number within the card in odd or even numbers, as follows: * For the outside/external ports, in odd numbers: port1 = 1 port2 = 3 port3 = 5 etc... Example: port2 of IO slot 11 will be: 213 . * The inside/internal ports, in even numbers: port1 = 2 port2 = 4 port3 = 6 etc... Example: port2 of IO slot 11 will be: 214 .

INT prtGenTestRunning

1.3.6.1.4.1.164.3.3.3.1.1.1.10

INTEGER

read-only

This object indicates which tests are running currently on the selected port (initiated by user and/or by the system). If a specific test is currently running on the port, its respective bit will be SET: TEST BIT ----------- --- localLoop 1 remoteLoop 2 bert 3 plb 4 llb 5 txInband 6 rxInband 7 prbs 8 loop2-v54 (RLB) 9 loop3-v54 (LLB) 10 DDS DSU loop 11 DDS CSU loop 12 Tone injection 13 Tx-plb 14 Tx-llb 15 DTE loop (HSSI) 16 Local DTE loop (HSSI)17 Local Line loop (HSSI)18 Remote Line loop (HSSI)19 HDSL-Tx-Inband 20 HDSL-Rx-Inband 21 Monitor 22 (test port) User Line Loopback 23 Network Line Loopback 24 e.g : If the return value is 3 -> 0000000000000011 -> Bits 1 & 2 are set -> the running tests are : local-loop remote-loop llb (Bit 5) - can be initiated by system only!

INT prtGenTestStatus

1.3.6.1.4.1.164.3.3.3.1.1.1.7

INTEGER

read-only

This attribute will be on(3) when there is at least one test in progress (running) on the port; otherwise the value will be off(2).

INT prtGenTsCnfgIdx

1.3.6.1.4.1.164.3.3.3.1.3.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg(1..255) being accessed. Idx of 255 relates to the TmpCnfg.

prtGenTsEntry

1.3.6.1.4.1.164.3.3.3.1.3.1

not-accessible

INT prtGenTsIConPrt

1.3.6.1.4.1.164.3.3.3.1.3.1.5

INTEGER

read-write

This attribute indicates the internally (In Mux) connected port. The valid port number depends on the IO slot no., the installed card type and the port type: outside, inside, SP. * The outside ports will be the T1/E1 cards ports. The convention used will be (for DXC): - first two digits will be: (IO slot number+10) for a stand-alone unit, the IO slot will be considered 1. - last one/two digits will be the port number within the card, in odd numbers: port1 = 1 port2 = 3 port3 = 5 etc... Example: port2 of IO slot 11 will be: 213 . * The inside ports will be for example, the HS cards ports. The convention used will be (for DXC): - first two digits will be: (IO slot number+10) for a stand-alone unit, the IO slot will be considered 1. - last one/two digits will be the port number within the card, in even numbers: port1 = 2 port2 = 4 port3 = 6 etc... Example: port2 of IO slot 11 will be: 214 . * noConnection - will be indicated as 10 for DXC and FCD-E1/T1. - will be indicated as 100 for FCD-E1/I and SMODs. * Split TS (same TS is Split to several ports) - 11. All HS port's timeslots must have the same destination port.

INT prtGenTsIConTs

1.3.6.1.4.1.164.3.3.3.1.3.1.6

INTEGER

read-write

This attribute indicates a unique time slot position. The valid time slots are 1..25 for T1 Card (25=Fbit) 0..31 for E1 (or HS) Card. In G732S-E1 lines time slot 16 is not valid for data, it is dedicated for multiframe synchronization bits and voice signaling. * For DXC: All HS port's timeslots must start with Timeslot no.1

INT prtGenTsIdx

1.3.6.1.4.1.164.3.3.3.1.3.1.3

INTEGER

read-only

This attribute indicates a unique time slot position. The valid time slots are 1..25 for T1 Card (25=Fbit) 0..31 for E1 or HS Card . In G732S-E1 lines time slot 16 is not valid for data, it is dedicated for multiframe synchronization bits and voice signaling.

INT prtGenTsPrtIdx

1.3.6.1.4.1.164.3.3.3.1.3.1.2

INTEGER

read-only

This attribute indicates a unique port number. The valid port number depends on the IO slot no., the installed card type and the port type: outside, inside, SP. In the DXC : - first two digits will be: (IO slot number+10) - last one/two digits will be the port number within the card in odd or even numbers, as follows: * For the outside/external ports, in odd numbers: port1 = 1 port2 = 3 port3 = 5 etc... Example: port2 of IO slot 11 will be: 213 . * The inside/internal ports, in even numbers: port1 = 2 port2 = 4 port3 = 6 etc... Example: port2 of IO slot 11 will be: 214 .

prtGenTsTable

1.3.6.1.4.1.164.3.3.3.1.3

not-accessible

The write operation into the Table's Objects is valid only for the TmpCnfg entry (Scratch).

INT prtGenTsType

1.3.6.1.4.1.164.3.3.3.1.3.1.4

INTEGER

read-write

The type of Timeslot. If the source or destination port is an HS port,'TS Type' must be 'data'. nc - means that this TimeSlot is not connected. voice, data, vcMP - also mean that this TS is connected. mng - means that this TS is dedicated to Management (not connected to another port.

INT prtGenType

1.3.6.1.4.1.164.3.3.3.1.1.1.11

INTEGER

read-only

This object describes the type of the selected port.

prtHdsl

1.3.6.1.4.1.164.3.3.3.7

prtHdslEntry

1.3.6.1.4.1.164.3.3.3.7.1.1

not-accessible

INT prtHdslIdx

1.3.6.1.4.1.164.3.3.3.7.1.1.1

INTEGER

read-only

This attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outside, inside. * The HDSL ports will be external. For port index, see product specification.

INT prtHdslMode

1.3.6.1.4.1.164.3.3.3.7.1.1.2

INTEGER

read-only

This object indicates the HDSL mode.

INT prtHdslRptrType

1.3.6.1.4.1.164.3.3.3.7.1.1.3

INTEGER

read-only

The Repeater between Near and Far modem. none - no repeater exists between the modems hrpt - HRPT repeater exists between the modems.

prtHdslTable

1.3.6.1.4.1.164.3.3.3.7.1

not-accessible

prtHS

1.3.6.1.4.1.164.3.3.3.3

prtHs4Cnfg

1.3.6.1.4.1.164.3.2.3.2.7

INT prtHSBertCountClr

1.3.6.1.4.1.164.3.3.3.3.2.1.3

INTEGER

read-write

Setting this object (to on) initiate bert counter clear operation. Valid only when bert test is active on the specific port. (Every time a new bert test starts, the counter is automatically cleared; this command enables clearing the counter while the test is running).

prtHSBertEntry

1.3.6.1.4.1.164.3.3.3.3.2.1

not-accessible

INT prtHSBertPrtIdx

1.3.6.1.4.1.164.3.3.3.3.2.1.1

INTEGER

read-only

This attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outside, inside, SP. * The inside ports will be the HS cards ports. The convention used will be (for DXC): - first two digits will be: (IO slot number+10) - last one/two digits will be the port number within the card, in even numbers: port1 = 2 port2 = 4 port3 = 6 etc... Example: port2 of IO slot 11 will be: 214 .

INT prtHSBertSlt

1.3.6.1.4.1.164.3.3.3.3.2.1.2

INTEGER

read-only

This attribute indicates a unique number to identify the slot where the card is inserted in. When the unit is stand-alone, this object is not applicable and 255 will be used.

prtHSBertTable

1.3.6.1.4.1.164.3.3.3.3.2

not-accessible

INT prtHSBertTestResult

1.3.6.1.4.1.164.3.3.3.3.2.1.4

INTEGER

read-only

This object indicates the number of Bit Error Rate indicated during the BERT test. Active only when bert test is running on the selected port.

INT prtHSClkMode

1.3.6.1.4.1.164.3.3.3.3.1.1.6

INTEGER

read-write

Clock Mode of the user data channel. dce - DACS operates as a DCE and provides transmit and receive clocks to the synchronous user DTE. dte1- DACS supplies the receive clock to the user equipment and accepts the user transmit clock. dte2- DACS requires transmit and receive clocks from the user equipment.

INT prtHSCnfgIdx

1.3.6.1.4.1.164.3.3.3.3.1.1.1

INTEGER

read-only

This attribute indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config.

INT prtHSCTS

1.3.6.1.4.1.164.3.3.3.3.1.1.7

INTEGER

read-write

Selection of CTS line state in the user data channel. on - CTS continuously ON. rts - CTS line follows the RTS line.

prtHsfCnfgEntry

1.3.6.1.4.1.164.3.2.3.2.6.1

not-accessible

INT prtHsfCnfgIdx

1.3.6.1.4.1.164.3.2.3.2.6.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relate to the TmpCnfg.

prtHsfCnfgTable

1.3.6.1.4.1.164.3.2.3.2.6

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry.

INT prtHSFifoSize

1.3.6.1.4.1.164.3.3.3.3.1.1.5

INTEGER

read-write

This object selects the size of the user data channel buffer FIFO used in the DTE2 mode. In the other modes, buffer size is automatically set by the DACS agent. Buffer FIFO size in bits, corresponds to FIFO lengths of +/-16, +/-30, +/-52, +/-72 bits.

INT prtHsfPrtIdx

1.3.6.1.4.1.164.3.2.3.2.6.1.3

INTEGER

read-only

This attribute indicates a unique external port index. Hs2 has only two ports (exPrt1,exPrt2). Hs3 has three ports (exPrt1,exPrt2,exPrt3). Hsq and hsqN has four ports. Hs6 has six external ports. Hs12 has twelve external ports.

INT prtHsfSltIdx

1.3.6.1.4.1.164.3.2.3.2.6.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid.

prtHsiCnfg

1.3.6.1.4.1.164.3.2.3.2.8

prtHSParamEntry

1.3.6.1.4.1.164.3.3.3.3.1.1

not-accessible

prtHSParamTable

1.3.6.1.4.1.164.3.3.3.3.1

not-accessible

INT prtHSPrtIdx

1.3.6.1.4.1.164.3.3.3.3.1.1.2

INTEGER

read-only

This attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outside, inside, SP. * The inside ports will be the HS cards ports. The convention used will be (for DXC): - first two digits will be: (IO slot number+10) - last one/two digits will be the port number within the card, in even numbers: port1 = 2 port2 = 4 port3 = 6 etc... Example: port2 of IO slot 11 will be: 214 .

INT prtHSRate

1.3.6.1.4.1.164.3.3.3.3.1.1.4

INTEGER

read-write

This object indicates the port rate (speed).

prtHsrCnfg

1.3.6.1.4.1.164.3.2.3.2.10

INT prtHSRtsState

1.3.6.1.4.1.164.3.3.3.3.1.1.8

INTEGER

read-only

RTS state of the port.

INT prtHSSlt

1.3.6.1.4.1.164.3.3.3.3.1.1.3

INTEGER

read-only

This attribute indicates a unique number to identify the slot where the card is inserted in. When the unit is stand-alone, this object is not applicable and 255 will be used.

prtI

1.3.6.1.4.1.164.3.3.3.6

prtICnfgEntry

1.3.6.1.4.1.164.3.3.3.6.1.1

not-accessible

INT prtICnfgIdx

1.3.6.1.4.1.164.3.3.3.6.1.1.1

INTEGER

read-only

This attribute indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config.

prtICnfgTable

1.3.6.1.4.1.164.3.3.3.6.1

not-accessible

INT prtIConnect

1.3.6.1.4.1.164.3.3.3.6.1.1.4

INTEGER

read-write

D channel connection. no - disconnected yes - connected.

INT prtIIdx

1.3.6.1.4.1.164.3.3.3.6.1.1.2

INTEGER

read-only

This attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outside, inside, SP. * The ISDN B1, B2, D channels will be inside ports. For port index, see product specification.

prtIn1p6VcPbxCnfgEntry

1.3.6.1.4.1.164.3.2.3.2.15.2.1

not-accessible

INT prtIn1p6VcPbxCnfgIdx

1.3.6.1.4.1.164.3.2.3.2.15.2.1.1

INTEGER

read-only

This object indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg

prtIn1p6VcPbxCnfgTable

1.3.6.1.4.1.164.3.2.3.2.15.2

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry.

INT prtIn1p6VcPbxConnect

1.3.6.1.4.1.164.3.2.3.2.15.2.1.4

INTEGER

read-write

This object indicates whether the port should be considered in any of the mux algorithms.

INT prtIn1p6VcPbxEchoCanceler

1.3.6.1.4.1.164.3.2.3.2.15.2.1.6

INTEGER

read-write

Echo canceler activation.

INT prtIn1p6VcPbxPabxTs

1.3.6.1.4.1.164.3.2.3.2.15.2.1.7

INTEGER

read-only

This object defines the PABX Time-Slot assigned to this internal port. For a T1 link, the valid values are: 1 .. 24. For an E1 link, the valid values are: 1 .. 31. This object is NOT applicable when prtIn1p6VcPbxConnect=no. This object is applicable for all cards of VC-PBX family. Default=the internal port index (1..6).

INT prtIn1p6VcPbxPrtIdx

1.3.6.1.4.1.164.3.2.3.2.15.2.1.3

INTEGER

read-only

A unique identifier of the port, within the card.

INT prtIn1p6VcPbxRate

1.3.6.1.4.1.164.3.2.3.2.15.2.1.5

INTEGER

read-write

This object indicates the port Rate. For Normal mode (prtIn7p8VcPbxMode=normal), only part of the values are valid (constant rate). For Server mode (prtIn7p8VcPbxMode=server), all values are applicable (user can select the desired compression rate).

INT prtIn1p6VcPbxSltIdx

1.3.6.1.4.1.164.3.2.3.2.15.2.1.2

INTEGER

read-only

This object indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid.

prtIn7p8VcPbxCnfgEntry

1.3.6.1.4.1.164.3.2.3.2.15.3.1

not-accessible

INT prtIn7p8VcPbxCnfgIdx

1.3.6.1.4.1.164.3.2.3.2.15.3.1.1

INTEGER

read-only

This object indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg

prtIn7p8VcPbxCnfgTable

1.3.6.1.4.1.164.3.2.3.2.15.3

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry.

INT prtIn7p8VcPbxConnect

1.3.6.1.4.1.164.3.2.3.2.15.3.1.4

INTEGER

read-write

This object indicates whether the port should be considered in any of the mux algorithms.

INT prtIn7p8VcPbxLinkTo

1.3.6.1.4.1.164.3.2.3.2.15.3.1.9

INTEGER

read-write

This object indicates the slot of the ML card to which the VC card is mapped. In the ?004 Unit the entries io6(10)..io12(16) are not valid. For Server mode (prtIn7p8VcPbxMode=server), this object is not applicable. Both ports, 7 and 8 should be linked to the same Slot. STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot and prtGenCnfgLinkToPort.

INT prtIn7p8VcPbxMode

1.3.6.1.4.1.164.3.2.3.2.15.3.1.5

INTEGER

read-write

This object indicates the working mode of the port: - normal - the compressed voice will be sent to an MTML card inside the Mux. - server - the compressed voice will be sent to the Digital Voice connector, as a service to an outside user.

INT prtIn7p8VcPbxOos

1.3.6.1.4.1.164.3.2.3.2.15.3.1.8

INTEGER

read-write

Out of service Signaling mode.

INT prtIn7p8VcPbxPrtIdx

1.3.6.1.4.1.164.3.2.3.2.15.3.1.3

INTEGER

read-only

A unique identifier of the port, within the card.

INT prtIn7p8VcPbxRate

1.3.6.1.4.1.164.3.2.3.2.15.3.1.6

INTEGER

read-write

This object indicates the port Main Rate. For Server mode (prtIn7p8VcPbxMode=server), the value will be notApplicable.

INT prtIn7p8VcPbxSignalMode

1.3.6.1.4.1.164.3.2.3.2.15.3.1.7

INTEGER

read-write

This object indicates the Signal Mode. For Server mode (prtIn7p8VcPbxMode=server), the only valid values are: - none - aBit

INT prtIn7p8VcPbxSltIdx

1.3.6.1.4.1.164.3.2.3.2.15.3.1.2

INTEGER

read-only

This object indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid.

prtInHsiCnfgEntry

1.3.6.1.4.1.164.3.2.3.2.8.2.1

not-accessible

INT prtInHsiCnfgIdx

1.3.6.1.4.1.164.3.2.3.2.8.2.1.1

INTEGER

read-only

This object indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg

prtInHsiCnfgTable

1.3.6.1.4.1.164.3.2.3.2.8.2

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry. This table is not applicable for HS-U card type.

INT prtInHsiConcentratedTo

1.3.6.1.4.1.164.3.2.3.2.8.2.1.6

INTEGER

read-write

The Concentration D Channel of the prtInHsiPrtIdx port. The port always belongs to the same card as prtInHsiPrtIdx port. This object is applicable only when prtInHsiRate=concentrated. Valid values: - notApplicable: 255 - for HS-S12, HS-U12 cards: inPrt37 (137) .. inPrt48 (148).

INT prtInHsiConnect

1.3.6.1.4.1.164.3.2.3.2.8.2.1.4

INTEGER

read-write

This attribute indicates whether the port should be considered in any of the mux algorithms.

INT prtInHsiPrtIdx

1.3.6.1.4.1.164.3.2.3.2.8.2.1.3

INTEGER

read-only

A unique port identifier within the card. Valid values: inPrt1 (101) .. inPrt48 (148).

INT prtInHsiRate

1.3.6.1.4.1.164.3.2.3.2.8.2.1.5

INTEGER

read-write

This object indicates the port speed. For HS-U/I and HS-S ports: 2 bit - up to 9600bps 4 bit - 19200bps 8 bit - 38400bps .. 64kbps. concentrated - this D channel goes to a Concentration channel, that represents many channels that this value was selected for them. The Concentrated channel is an Internal D Channel of the same card. This value is applicable only for D channels, except Concentration channel itself. --for HS-S and HS-U/I cards the Concentration channel will always be: internal-13 --for HS-S12, HS-S6, HS-U12, HS-U6, the Concentration channel is selected via the prtInHsiConcentratedTo object.

INT prtInHsiSltIdx

1.3.6.1.4.1.164.3.2.3.2.8.2.1.2

INTEGER

read-only

This object indicates a unique slot position where the card is inserted.

prtInLs2CnfgEntry

1.3.6.1.4.1.164.3.2.3.2.4.2.1

not-accessible

INT prtInLs2CnfgIdx

1.3.6.1.4.1.164.3.2.3.2.4.2.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg

prtInLs2CnfgTable

1.3.6.1.4.1.164.3.2.3.2.4.2

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry.

INT prtInLs2Connect

1.3.6.1.4.1.164.3.2.3.2.4.2.1.4

INTEGER

read-write

This attribute indicates whether the port should be considered in any of the mux algorithms. It also affects all the module considerations because the module has only one Internal interface which is the composite channel.

INT prtInLs2EnvAssign

1.3.6.1.4.1.164.3.2.3.2.4.2.1.8

INTEGER

read-write

Envelope assignment type.

INT prtInLs2Group

1.3.6.1.4.1.164.3.2.3.2.4.2.1.5

INTEGER

read-write

This attribute indicates the group number of the port. LS-2 internal ports with the same group number share the same Time slot of the main link

INT prtInLs2LinkTo

1.3.6.1.4.1.164.3.2.3.2.4.2.1.7

INTEGER

read-write

It indicates the slot of the main link card to which the LS2 card is mapped. STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot and prtGenCnfgLinkToPort.

INT prtInLs2Member

1.3.6.1.4.1.164.3.2.3.2.4.2.1.6

INTEGER

read-write

This attribute indicates the group member id of the port. This parameter is for the automatic envelope assignment algorithm.

INT prtInLs2PrtIdx

1.3.6.1.4.1.164.3.2.3.2.4.2.1.3

INTEGER

read-only

This attribute indicates a unique internal port index.

INT prtInLs2SltIdx

1.3.6.1.4.1.164.3.2.3.2.4.2.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid.

prtInLs6CnfgEntry

1.3.6.1.4.1.164.3.2.3.2.13.3.1

not-accessible

INT prtInLs6CnfgIdx

1.3.6.1.4.1.164.3.2.3.2.13.3.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg

prtInLs6CnfgTable

1.3.6.1.4.1.164.3.2.3.2.13.3

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry.

INT prtInLs6Connect

1.3.6.1.4.1.164.3.2.3.2.13.3.1.4

INTEGER

read-write

This attribute indicates whether the port should be considered in any of the mux algorithms. It also affects all the module considerations because the module has only one Internal interface which is the composite channel.

INT prtInLs6LinkTo

1.3.6.1.4.1.164.3.2.3.2.13.3.1.8

INTEGER

read-write

It indicates the slot of the main link card to which the Ls6 card is mapped. In the ?004 Unit the entries io6(10)..io12(16) are not valid. notApplicable - when prtInLs6TandemMode=tandemSlave. STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot and prtGenCnfgLinkToPort.

INT prtInLs6PrtIdx

1.3.6.1.4.1.164.3.2.3.2.13.3.1.3

INTEGER

read-only

This attribute indicates a unique internal port index.

INT prtInLs6Rate

1.3.6.1.4.1.164.3.2.3.2.13.3.1.6

INTEGER

read-write

Main Rate in Kbps.

INT prtInLs6RemoteType

1.3.6.1.4.1.164.3.2.3.2.13.3.1.7

INTEGER

read-write

Remote Type. notApplicable - when prtInLs6TandemMode=tandemSlave

INT prtInLs6SltIdx

1.3.6.1.4.1.164.3.2.3.2.13.3.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid.

INT prtInLs6TandemMode

1.3.6.1.4.1.164.3.2.3.2.13.3.1.5

INTEGER

read-write

This object indicates the Tandem Mode. tandemSlave - is valid only for an LS-6 card having on the (current slot-1) an LS-6 card with 'tandemMaster' mode.

prtInMbeCnfgEntry

1.3.6.1.4.1.164.3.2.3.2.11.2.1

not-accessible

INT prtInMbeCnfgIdx

1.3.6.1.4.1.164.3.2.3.2.11.2.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg

prtInMbeCnfgTable

1.3.6.1.4.1.164.3.2.3.2.11.2

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry.

INT prtInMbeConnect

1.3.6.1.4.1.164.3.2.3.2.11.2.1.4

INTEGER

read-write

This attribute indicates whether the port should be considered in any of the mux algorithms.

INT prtInMbeLinkTo

1.3.6.1.4.1.164.3.2.3.2.11.2.1.6

INTEGER

read-write

It indicates the slot of the main link card to which the MBE card is mapped. In the ?004 Unit the entries io6(10)..io16) are not valid. STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot and prtGenCnfgLinkToPort.

INT prtInMbePrtIdx

1.3.6.1.4.1.164.3.2.3.2.11.2.1.3

INTEGER

read-only

A unique port identifier within the card.

INT prtInMbeRate

1.3.6.1.4.1.164.3.2.3.2.11.2.1.5

INTEGER

read-write

This attribute indicates the port speed.

INT prtInMbeSltIdx

1.3.6.1.4.1.164.3.2.3.2.11.2.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid.

INT prtInPh1MlAssociatedExCh

1.3.6.1.4.1.164.3.2.3.2.2.3.1.20

INTEGER

read-write

This object indicates the external port associated to this internal port. At present, it is used by the Hybrid (mp2100h), MHS-4 cards which can have up to 64 dynamic internal ports associated with External ports. For ISDN cards, the value will be: notApplicable (255). The associated external of an ISDN internal port is represented by the MIB object: prtIsdnDirectoryPrtNu.

INT prtInPh1MlBearerCh

1.3.6.1.4.1.164.3.2.3.2.2.3.1.19

INTEGER

read-write

Defines which B (bearer) channels are used for transferring ISDN data. Default value is: none (255). anyChannel (2) is skipped because it is not in use here.

INT prtInPh1MlCcittCrc

1.3.6.1.4.1.164.3.2.3.2.2.3.1.23

INTEGER

read-write

This object indicates how many Bits are used for CRC (HDLC item).

INT prtInPh1MlClockEncoding

1.3.6.1.4.1.164.3.2.3.2.2.3.1.21

INTEGER

read-write

This object is the Encoding type of the Line. This parameter is applicable only for FR and FR+ protocols.

prtInPh1MlCnfgEntry

1.3.6.1.4.1.164.3.2.3.2.2.3.1

not-accessible

INT prtInPh1MlCnfgIdx

1.3.6.1.4.1.164.3.2.3.2.2.3.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.

prtInPh1MlCnfgTable

1.3.6.1.4.1.164.3.2.3.2.2.3

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry.

INT prtInPh1MlCongLevel

1.3.6.1.4.1.164.3.2.3.2.2.3.1.9

INTEGER

read-write

This attribute indicates the level of delayed data in precents of the total available dynamic memory, for which the port will start to operate . The resolution of the parameter is 5 percent. Valid values: 10..70, 255. 255=notApplicable.

INT prtInPh1MlCongResponse

1.3.6.1.4.1.164.3.2.3.2.2.3.1.8

INTEGER

read-write

This attribute indicates how to handle the congestion indication to/from the mux internal connection side (for example transmit/receive becn to/from the network). no - do nothing FlowControl - translate the congestion indication between the port and the internal connection port according to the definition of the prtInPh1MlFlowControl parameters. The operation is done in both directions.

INT prtInPh1MlConnect

1.3.6.1.4.1.164.3.2.3.2.2.3.1.4

INTEGER

read-write

This attribute indicates whether the port should be considered in any of the mux algorithms.

INT prtInPh1MlConnectionTyp

1.3.6.1.4.1.164.3.2.3.2.2.3.1.7

INTEGER

read-write

This attribute indicates the link connection type. It is required for three reasons: FR/CR Inband management operation (LMI,CLMM...). CIR check. NMS network management. SameNetManaged - indicates network internal line. SameNetNotMana - indicates network internal line, but the remote mux is not managed by the nms. User - User to Network Interface. OtherNet - Network To Network Interfce. PubNet - Access Mux To PubNet Interface.

INT prtInPh1MlDlciCnfgIdx

1.3.6.1.4.1.164.3.2.3.2.2.4.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.

prtInPh1MlDlciEntry

1.3.6.1.4.1.164.3.2.3.2.2.4.1

not-accessible

INT prtInPh1MlDlciIConDlci

1.3.6.1.4.1.164.3.2.3.2.2.4.1.8

INTEGER

read-write

This attribute indicates a unique internal connection dlci number which the src dlci is routed to.

INT prtInPh1MlDlciIConPrt

1.3.6.1.4.1.164.3.2.3.2.2.4.1.7

INTEGER

read-write

This attribute indicates a unique port id which the dlci is routed to.

INT prtInPh1MlDlciIConSlt

1.3.6.1.4.1.164.3.2.3.2.2.4.1.6

INTEGER

read-write

This attribute indicates a unique slot position In the Mux (Agent) where the dlci is routed to. In the ?004 Unit the entries io6(10)..io16) are not valid

INT prtInPh1MlDlciIdx

1.3.6.1.4.1.164.3.2.3.2.2.4.1.4

INTEGER

read-only

This attribute indicates a unique index for each possible used dlci(16..991). When the protocol is not Multiplexing protocol, then its type is 'user' and the only valid index is 1.

INT prtInPh1MlDlciPriority

1.3.6.1.4.1.164.3.2.3.2.2.4.1.13

INTEGER

read-write

This attribute indicates a unique priority of the pcv. 1 is the lowest priority and 8 is the highest priority.

INT prtInPh1MlDlciPrtIdx

1.3.6.1.4.1.164.3.2.3.2.2.4.1.3

INTEGER

read-only

This attribute indicates a unique internal port number. MPH.1/E1 and MPH.1/T1 cards have three internal ports.

INT prtInPh1MlDlciRxBc

1.3.6.1.4.1.164.3.2.3.2.2.4.1.11

INTEGER

read-write

This attribute indicates a unique Rx committed bandwidth on the user receive line or at the port transmit line.

INT prtInPh1MlDlciRxBe

1.3.6.1.4.1.164.3.2.3.2.2.4.1.12

INTEGER

read-write

This attribute indicates a unique Rx excess bandwidth on the user receive line or at the port transmit line.

INT prtInPh1MlDlciSltIdx

1.3.6.1.4.1.164.3.2.3.2.2.4.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid

INT prtInPh1MlDlciStatus

1.3.6.1.4.1.164.3.2.3.2.2.4.1.14

INTEGER

read-only

This attribute indicates the status of the pvc. The status is disconnected(1) when one of the sides is programmed as not connected

prtInPh1MlDlciTable

1.3.6.1.4.1.164.3.2.3.2.2.4

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry.

INT prtInPh1MlDlciTxBc

1.3.6.1.4.1.164.3.2.3.2.2.4.1.9

INTEGER

read-write

This attribute indicates a unique Tx committed bandwidth on the user transmit line or at the port receive line.

INT prtInPh1MlDlciTxBe

1.3.6.1.4.1.164.3.2.3.2.2.4.1.10

INTEGER

read-write

This attribute indicates a unique Tx excess bandwidth on the user transmit line or at the port receive line.

INT prtInPh1MlDlciValid

1.3.6.1.4.1.164.3.2.3.2.2.4.1.5

INTEGER

read-write

This attribute indicates whether the attributes in this entry are valid or not. The user can add/delete pvc (dlci to dlci connection) by modifing this object

INT prtInPh1MlEnqPeriod

1.3.6.1.4.1.164.3.2.3.2.2.3.1.14

INTEGER

read-write

This object is the Status Enquiry Period, in seconds. It determines the frequency of the Status Enquiry message as sent by the FR user side. At the FR network side, it determines the timeout for this message reception. Default = 4 seconds. This parameter is applicable only for FR and FR+ protocols AND only when prtInPh1MlFrMngProt is NOT (notApplicable or none). 0=notApplicable.

INT prtInPh1MlErrorsThreshold

1.3.6.1.4.1.164.3.2.3.2.2.3.1.17

INTEGER

read-write

This object is the Max Errors. It determines the number of Status Enquiry Errors that occured within the FR sliding window, before this port is considered DOWN (threshold). This parameter is applicable only for FR and FR+ protocols AND only when prtInPh1MlFrMngProt is NOT (notApplicable or none). 0=notApplicable.

INT prtInPh1MlFlowControl

1.3.6.1.4.1.164.3.2.3.2.2.3.1.11

INTEGER

read-write

This attribute indicates the required flow control betweeen the port and the remote equipment.

INT prtInPh1MlFrameSeparator

1.3.6.1.4.1.164.3.2.3.2.2.3.1.24

INTEGER

read-write

This object indicates what should be transferred on the line when there are no frames to pass (HDLC item). idles: mean that FF will pass on the line flags: mean that 7E will pass on the line.

INT prtInPh1MlFrMngProt

1.3.6.1.4.1.164.3.2.3.2.2.3.1.13

INTEGER

read-write

This object indicates the Frame-Relay management protocol. ansiT1 = ANSI T1.617 Annex D (this is the default value). This parameter is applicable only for FR and FR+ protocols. When prtInPh1MlConnectionTyp = sameNetManaged, this object will be RO (internally determined).

INT prtInPh1MlFrWindowSize

1.3.6.1.4.1.164.3.2.3.2.2.3.1.16

INTEGER

read-write

This object is the FR Window Size. It determines the number of samplings in the sliding window that counts the errors. This parameter is applicable only for FR and FR+ protocols AND only when prtInPh1MlFrMngProt is NOT (notApplicable or none). 0=notApplicable.

INT prtInPh1MlFullRptPeriod

1.3.6.1.4.1.164.3.2.3.2.2.3.1.15

INTEGER

read-write

This object is the Full Report Frequency. It determines the number of the Status Enquiry messages sent by the FR user side, before a Full Report Request is sent. The units are : Status Enquiry messages (periods). Valid values: 1 .. 255. 255 = infinite (never sent). This parameter is applicable only for FR and FR+ protocols AND only when prtInPh1MlFrMngProt is NOT (notApplicable or none). 0=notApplicable.

INT prtInPh1MlMaxIdleTime

1.3.6.1.4.1.164.3.2.3.2.2.3.1.18

INTEGER

read-write

Move to higher prioritized connected link after this period of seconds of silence on the current link. 0=Never. Never move to higher prioritized connected link. UNIT is seconds. Valid values are: 0, 1, 2, 3, 4, 5, 10, 20, 30, 40, 50, 60, 120, 180, 240, 300, 360, 420, 480, 540, 600, 900, 1200, 1500, 1800. Attempt to Set an invalid value will result in getting the default value.

INT prtInPh1MlMinSeparators

1.3.6.1.4.1.164.3.2.3.2.2.3.1.22

INTEGER

read-write

Minimum number of bytes separating between two adjacent frames (HDLC item). 0 = notApplicable

INT prtInPh1MlProtocol

1.3.6.1.4.1.164.3.2.3.2.2.3.1.6

INTEGER

read-write

This attribute indicates the applied protocol.

INT prtInPh1MlPrtIdx

1.3.6.1.4.1.164.3.2.3.2.2.3.1.3

INTEGER

read-only

This attribute indicates a unique port number. MPH.1/E1 and MPH.1/T1 cards have three internal interfaces. MX3000 modules may have up to 50 internal ports.

INT prtInPh1MlRate

1.3.6.1.4.1.164.3.2.3.2.2.3.1.5

INTEGER

read-write

This attribute indicates the port speed.

INT prtInPh1MlSegment

1.3.6.1.4.1.164.3.2.3.2.2.3.1.12

INTEGER

read-write

This object is the Segmentation in Bytes. In protocol FR+, ISDN internals, MX 30/300 the segmentation is: 50 (2) ,158 (3) ,266 (4) ,376 (5), 484 (6) In MX 3000/4: For protocol FR+ (internal ISDN ports of MHS.S, MHS.U, MHS.E1, MHS.T1 cards) segmentation values are: 236 (7),472 (8), 708 (9), 944 (10) ,1180 (11)

INT prtInPh1MlSltType

1.3.6.1.4.1.164.3.2.3.2.2.3.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the card is inserted. For ISDN BRI port of MX300/30: io1(5) = isdn1(5) and io2(6) = isdn2(6) In the ?004 Unit the entries io6(10)..io12(16) are not valid

INT prtInPh1MlTc

1.3.6.1.4.1.164.3.2.3.2.2.3.1.10

INTEGER

read-write

This attribute indicates the Tc parameter which is the time period of the sliding window in which the Bc/Be are tested. The value of this parameter is identical for all the ports in the specific card. 255=notApplicable.

prtInTreCnfgEntry

1.3.6.1.4.1.164.3.2.3.2.12.2.1

not-accessible

INT prtInTreCnfgIdx

1.3.6.1.4.1.164.3.2.3.2.12.2.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg

prtInTreCnfgTable

1.3.6.1.4.1.164.3.2.3.2.12.2

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry.

INT prtInTreConnect

1.3.6.1.4.1.164.3.2.3.2.12.2.1.4

INTEGER

read-write

This attribute indicates whether the port should be considered in any of the mux algorithms.

INT prtInTreLinkTo

1.3.6.1.4.1.164.3.2.3.2.12.2.1.6

INTEGER

read-write

It indicates the slot of the main link card to which the MBE card is mapped. In the ?004 Unit the entries io6(10)..io16) are not valid. STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot and prtGenCnfgLinkToPort.

INT prtInTrePrtIdx

1.3.6.1.4.1.164.3.2.3.2.12.2.1.3

INTEGER

read-only

A unique port identifier within the card.

INT prtInTreRate

1.3.6.1.4.1.164.3.2.3.2.12.2.1.5

INTEGER

read-write

This attribute indicates the port speed.

INT prtInTreSltIdx

1.3.6.1.4.1.164.3.2.3.2.12.2.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid.

prtInVc3CnfgEntry

1.3.6.1.4.1.164.3.2.3.2.14.2.1

not-accessible

INT prtInVc3CnfgIdx

1.3.6.1.4.1.164.3.2.3.2.14.2.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg

prtInVc3CnfgTable

1.3.6.1.4.1.164.3.2.3.2.14.2

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry.

INT prtInVc3Connect

1.3.6.1.4.1.164.3.2.3.2.14.2.1.4

INTEGER

read-write

This attribute indicates whether the port should be considered in any of the mux algorithms.

INT prtInVc3LinkTo

1.3.6.1.4.1.164.3.2.3.2.14.2.1.7

INTEGER

read-write

This attribute indicates the slot of the ML card to which the VC card is mapped. In the ?004 Unit the entries io6(10)..io12(16) are not valid. STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot and prtGenCnfgLinkToPort.

INT prtInVc3Oos

1.3.6.1.4.1.164.3.2.3.2.14.2.1.6

INTEGER

read-write

This object is equal for all the ports in the specific card because of HW limitations

INT prtInVc3PrtIdx

1.3.6.1.4.1.164.3.2.3.2.14.2.1.3

INTEGER

read-only

A unique identifier of the port, within the card.

INT prtInVc3Rate

1.3.6.1.4.1.164.3.2.3.2.14.2.1.5

INTEGER

read-write

Rate in bps.

INT prtInVc3SltIdx

1.3.6.1.4.1.164.3.2.3.2.14.2.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid.

INT prtIRate

1.3.6.1.4.1.164.3.3.3.6.1.1.3

INTEGER

read-write

This object indicates the port rate in bits. Each TS contains 8 bits. Thus, 1 bit is equivalent to 8Kbps rate.

INT prtIsdnBasicRateLineTopology

1.3.6.1.4.1.164.3.2.3.2.16.1.1.6

INTEGER

read-write

This attribute is relevant for ISDN BRI only. It is equivalent to isdnBasicRateLineTopology in the isdn MIB.

prtIsdnCnfg

1.3.6.1.4.1.164.3.2.3.2.16

prtIsdnCnfgEntry

1.3.6.1.4.1.164.3.2.3.2.16.1.1

not-accessible

INT prtIsdnCnfgIdx

1.3.6.1.4.1.164.3.2.3.2.16.1.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.

prtIsdnCnfgTable

1.3.6.1.4.1.164.3.2.3.2.16.1

not-accessible

The write operation into the table objects is valid only to the TmpCnfg entry.

INT prtIsdnConnect

1.3.6.1.4.1.164.3.2.3.2.16.1.1.4

INTEGER

read-write

This attribute indicates if the port is connected.

INT prtIsdnDirectoryCnfgIdx

1.3.6.1.4.1.164.3.2.3.2.16.3.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.

prtIsdnDirectoryEntry

1.3.6.1.4.1.164.3.2.3.2.16.3.1

not-accessible

STR prtIsdnDirectoryLocalAddr

1.3.6.1.4.1.164.3.2.3.2.16.3.1.4

DisplayString

read-write

This is the local address associated with this entry. - For MX: Size=17 , Default=0 (17 characters) - For KM: Size=20, Default=blank (20 characters)

STR prtIsdnDirectoryLocalAddr2

1.3.6.1.4.1.164.3.2.3.2.16.3.1.11

DisplayString

read-write

This is the second local address associated with this entry. - For MX: Size=17 , Default=0 (17 characters) - For KM: Size=20, Default=blank (20 characters)

STR prtIsdnDirectoryLocalSubAddr

1.3.6.1.4.1.164.3.2.3.2.16.3.1.5

DisplayString

read-write

This is the local subaddress associated with this entry. - For MX: Size=6 , Default=0 (6 characters) - For KM: Size=4 , Default=blank (4 characters)

STR prtIsdnDirectoryLocalSubAddr2

1.3.6.1.4.1.164.3.2.3.2.16.3.1.12

DisplayString

read-write

This is the second local subaddress associated with this entry. - For MX: Size=6 , Default=0 (6 characters) - For KM: Size=4 , Default=blank (4 characters)

INT prtIsdnDirectoryPrtIdx

1.3.6.1.4.1.164.3.2.3.2.16.3.1.3

INTEGER

read-only

For MAXcess this is the internal port number: 101, 102,.... For KM-2100 the port index is calculated as follows: 100*Slot+Ch

INT prtIsdnDirectoryPrtNu

1.3.6.1.4.1.164.3.2.3.2.16.3.1.8

INTEGER

read-write

This is the external port number connected to this entry.

STR prtIsdnDirectoryRemoteAddr

1.3.6.1.4.1.164.3.2.3.2.16.3.1.6

DisplayString

read-write

This is the remote address associated with this entry. - For MX: Size=17 , Default=0 (17 characters) - For KM: Size=20, Default=blank (20 characters)

STR prtIsdnDirectoryRemoteAddr2

1.3.6.1.4.1.164.3.2.3.2.16.3.1.13

DisplayString

read-write

This is the second remote address associated with this entry. - For MX: Size=17 , Default=0 (17 characters) - For KM: Size=20, Default=blank(20 characters)

STR prtIsdnDirectoryRemoteSubAddr

1.3.6.1.4.1.164.3.2.3.2.16.3.1.7

DisplayString

read-write

This is the remote subaddress associated with this entry. - For MX: Size=6 , Default=0 (6 characters) - For KM: Size=4 , Default=blank (4 characters)

STR prtIsdnDirectoryRemoteSubAddr2

1.3.6.1.4.1.164.3.2.3.2.16.3.1.14

DisplayString

read-write

This is the second remote subaddress associated with this entry. - For MX: Size=6 , Default=0 (6 characters) - For KM: Size=4 , Default=blank (4 characters)

INT prtIsdnDirectoryRowStatus

1.3.6.1.4.1.164.3.2.3.2.16.3.1.10

INTEGER

read-write

This is the status for the row. It allows to know whether to consider this row or not.

INT prtIsdnDirectorySltIdx

1.3.6.1.4.1.164.3.2.3.2.16.3.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the card is inserted. For MX300/30 ports: io1(5) = isdn1(5) and io2(6) = isdn2(6). In ?004 Unit the entries io6(10)..io12(16) are not valid For KM2100/4 Valid entries are 'kmxMlA ' or 'kmxMlB'

prtIsdnDirectoryTable

1.3.6.1.4.1.164.3.2.3.2.16.3

not-accessible

The write operation into the table objects is valid only to the TmpCnfg entry.

INT prtIsdnDirectoryTeiId

1.3.6.1.4.1.164.3.2.3.2.16.3.1.9

INTEGER

read-write

This is the abstract terminal id if relevant, connected to this entry.

INT prtIsdnEndpointBearerCh

1.3.6.1.4.1.164.3.2.3.2.16.2.1.8

INTEGER

read-write

This is the selected dialing channel. anyChannel - the system selects the dialing channel.

INT prtIsdnEndpointCnfgIdx

1.3.6.1.4.1.164.3.2.3.2.16.2.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.

prtIsdnEndpointEntry

1.3.6.1.4.1.164.3.2.3.2.16.2.1

not-accessible

INT prtIsdnEndpointIdx

1.3.6.1.4.1.164.3.2.3.2.16.2.1.4

INTEGER

read-only

Since more than one endpoint may be defined per isdn entity, this field is a simple index. It corresponds to isdnEndpointIdx in the isdn MIB.

INT prtIsdnEndpointPrtIdx

1.3.6.1.4.1.164.3.2.3.2.16.2.1.3

INTEGER

read-only

This attribute indicates a unique port number. For MAXcess the values will be: exPrt1(1), exPrt2(2), exPrt3(3), exPrt4(4), For KM-2100 the port index is calculated as follows: 100*Slot+Ch

INT prtIsdnEndpointRowStatus

1.3.6.1.4.1.164.3.2.3.2.16.2.1.9

INTEGER

read-write

This field indicates whether to consider this endpoint or not.

INT prtIsdnEndpointSltIdx

1.3.6.1.4.1.164.3.2.3.2.16.2.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the card is inserted. In ?004 Unit the entries io6(10)..io12(16) are not valid For KM2100/4 Valid entries are 'kmxMlA ' or 'kmxMlB'

STR prtIsdnEndpointSpid

1.3.6.1.4.1.164.3.2.3.2.16.2.1.7

DisplayString

read-write

The Service profile IDentifier (SPID) information for this Terminal Endpoint. It is is composed of 9-20 numeric characters. It corresponds to isdnEndpointSpid in the isdn MIB.

prtIsdnEndpointTable

1.3.6.1.4.1.164.3.2.3.2.16.2

not-accessible

The write operation into the table objects is valid only to the TmpCnfg entry.

INT prtIsdnEndpointTeiType

1.3.6.1.4.1.164.3.2.3.2.16.2.1.5

INTEGER

read-write

The type of TEI (Terminal Endpoint Identifier) used for this Terminal Endpoint. In case of dynamic(1), the TEI value is selected by the switch. In case of static(2), a valid TEI value has to be entered in the isdnEndpointTeiValue object. interface type as well as the Terminal Endpoint type. static(2). On Basic Rate interfaces the default value is dynamic(1) for isdn(63) Terminal Endpoints. It corresponds to isdnEndpointTeiType in the isdn MIB.

INT prtIsdnEndpointTeiValue

1.3.6.1.4.1.164.3.2.3.2.16.2.1.6

INTEGER

read-write

When the TEI Type is static, the value of the TEI should be between 0 and 63. Else, it is not selectable by user. 255 = notApplicable. It corresponds to isdnEndpointTeiValue in the isdn MIB

INT prtIsdnFilter

1.3.6.1.4.1.164.3.2.3.2.16.1.1.8

INTEGER

read-write

This attribute allows the user to configure the port: answerAll(2): accept all incoming calls, rejectAll(3): reject all incoming calls, selective(4): accept or reject according directory table.

INT prtIsdnMode

1.3.6.1.4.1.164.3.2.3.2.16.1.1.7

INTEGER

read-write

This attribute allows the user to configure the port as leased(2) in case of connection to a TDM network.

INT prtIsdnNumOfAbstractTerm

1.3.6.1.4.1.164.3.2.3.2.16.1.1.10

INTEGER

read-write

An object for KM2100/4 agents. 255=Not Applicable When ISDN Standard = ETSI or NTT (European) the value should be 255 (NotApplicable) else If ML speed is 64Kbps value should be 1. If ML speed is 128Kbps value can be either 1 or 2 (user selection).

INT prtIsdnPrtIdx

1.3.6.1.4.1.164.3.2.3.2.16.1.1.3

INTEGER

read-only

This attribute indicates a unique port number. For MAXcess the values will be: exPrt1(1), exPrt2(2), exPrt3(3), exPrt4(4), For KM-2100 the port index is calculated as follows: 100*Slot+Ch

INT prtIsdnSignalingProtocol

1.3.6.1.4.1.164.3.2.3.2.16.1.1.5

INTEGER

read-write

This attribute fixes which signaling protocol is used at this port (D-Channel). It is equivalent to isdnSignalingProtocol in the isdn MIB.

INT prtIsdnSimultaneousCall

1.3.6.1.4.1.164.3.2.3.2.16.1.1.9

INTEGER

read-write

In case of simultaneous call (local,remote and remote,local): accept(2): accept the incoming call, reject(3): reject the incoming call.

INT prtIsdnSltIdx

1.3.6.1.4.1.164.3.2.3.2.16.1.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid For KM2100/4 Valid entries are 'kmxMlA ' or 'kmxMlB'

INT prtIsdnSwitchMode

1.3.6.1.4.1.164.3.2.3.2.16.1.1.11

INTEGER

read-write

For KM2100. auto - The call is initiated automatically by one of the IO cards connected to KML.10(ISDN card) having ISDN Switch Mode. manual - The call is initiated by the user manually, for KML.10 having ISDN Switch Mode (via mdlSCmd). connect- The call is initiated 'immediately', for KML.10 having ISDN Switch Mode. 'immediately'- means: immediately after power-up (when product performed Reset) OR, since this value appears in the active configuration. In this case, the call can be disconnected only by power-off of the product or by changing this object to another value (or actual Remove of the KML.10 relevant card). notApplicable - For other card types.

prtLogicalCnfg

1.3.6.1.4.1.164.3.2.3.2.17

prtLogicalCnfgEntry

1.3.6.1.4.1.164.3.2.3.2.17.1.1

not-accessible

INT prtLogicalCnfgIdx

1.3.6.1.4.1.164.3.2.3.2.17.1.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.

prtLogicalCnfgTable

1.3.6.1.4.1.164.3.2.3.2.17.1

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry.

INT prtLogicalConnect

1.3.6.1.4.1.164.3.2.3.2.17.1.1.4

INTEGER

read-write

This attribute indicates whether the port should be considered in any of the mux algorithms.

INT prtLogicalFunction

1.3.6.1.4.1.164.3.2.3.2.17.1.1.5

INTEGER

read-write

This parameter defines the function of the relevant channel.

INT prtLogicalPrtIdx

1.3.6.1.4.1.164.3.2.3.2.17.1.1.3

INTEGER

read-only

This attribute indicates a unique port number. This port number should be an internal port number: inPrt1(101)->inPrt50(150), linkSel1(200)->linkSel50(250), encaps1(300)-> encaps50(350), huntGr1(101) -> huntGr10(110).

INT prtLogicalRowStatus

1.3.6.1.4.1.164.3.2.3.2.17.1.1.6

INTEGER

read-write

This parameter allows the NMS to create/delete logical ports.

INT prtLogicalSltIdx

1.3.6.1.4.1.164.3.2.3.2.17.1.1.2

INTEGER

read-only

Slot Index. For ISDN BRI Ports of MX300/30, io1(5) = isdn1(5) and io2(6) = isdn2(6).

prtLs2Cnfg

1.3.6.1.4.1.164.3.2.3.2.4

prtLs6Cnfg

1.3.6.1.4.1.164.3.2.3.2.13

prtMbeCnfg

1.3.6.1.4.1.164.3.2.3.2.11

INT prtMl4CGA

1.3.6.1.4.1.164.3.2.3.2.19.1.1.5

INTEGER

read-write

This object selects the method used to signal the CGA state to the other end, through the main link. 'none' - non-transparent mode. When one of the links (main) will be in Out Of Service state, both 'Data/Voice Oos' and 'Oos' will be transmitted to the other end. 'trans' - when one of the links (main) will be in Out Of Service state, 'Data/Voice Oos' will be transmitted to the other end. 'full' - fully-transparent mode. When one of the links (main) will be in Out Of Service state, neither 'Data/Voice Oos' nor 'Oos' will be transmitted to the other end.

prtMl4Cnfg

1.3.6.1.4.1.164.3.2.3.2.19

prtMl4CnfgEntry

1.3.6.1.4.1.164.3.2.3.2.19.1.1

not-accessible

INT prtMl4CnfgIdx

1.3.6.1.4.1.164.3.2.3.2.19.1.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. The write operation is valid only to the TmpCnfg.

prtMl4CnfgTable

1.3.6.1.4.1.164.3.2.3.2.19.1

not-accessible

This is an extension table for MTML-4 card parameters.

OCT prtMl4DataOos

1.3.6.1.4.1.164.3.2.3.2.19.1.1.8

OCTET STRING

read-write

Data Out-Of-Service code. Valid range: (0 - FF HEX). For agents that do not support this feature, the value will always be 0.

INT prtMl4Oos

1.3.6.1.4.1.164.3.2.3.2.19.1.1.6

INTEGER

read-write

'idle' = '0' = on-hook, idle state 'busy' = '1' = off-hook, busy state 'forcedIdle' = SP = both A and B signaling bits are forced to '0' during out-of-service periods. 'forcedBusy' = MK = both A and B signaling bits are forced to '1' during out-of-service periods. 'busyIdle' = MK_SP = A and B bits are forced to '1' for 2.5 seconds; then they are switched to '0' until out-of-service condition disappears. 'idleBusy' = SP_MK = A and B bits are forced to '0' for 2.5 seconds; then they are switched to '1' until out-of-service condition disappears. - for T1: '0'=0 ; '1'=1 - for E1: '0'=1 ; '1'=0

INT prtMl4PrtIdx

1.3.6.1.4.1.164.3.2.3.2.19.1.1.3

INTEGER

read-only

This attribute indicates a unique port number.

INT prtMl4Service

1.3.6.1.4.1.164.3.2.3.2.19.1.1.9

INTEGER

read-write

Link Service. leasedLine - usual TDM interface. v51 - V5.1 interface.

INT prtMl4SigProfile

1.3.6.1.4.1.164.3.2.3.2.19.1.1.4

INTEGER

read-write

This object indicates the Signaling Profile of the port. none - when the Frame is G732N (no MF). p1 = profile 1 p2 = profile 2 p3 = profile 3 p4 = profile 4 p5 = profile 5

INT prtMl4SltIdx

1.3.6.1.4.1.164.3.2.3.2.19.1.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the module is inserted.

OCT prtMl4VoiceOos

1.3.6.1.4.1.164.3.2.3.2.19.1.1.7

OCTET STRING

read-write

Voice Out-Of-Service code. Valid range: (0 - FF HEX). For agents that do not support this feature, the value will always be 0.

INT prtMonCnfgIdx

1.3.6.1.4.1.164.3.3.3.1.6.1.1

INTEGER

read-only

This object indicates the Idx of the Cnfg(1..255) being accessed. Idx of 255 relates to the TmpCnfg.

prtMonEntry

1.3.6.1.4.1.164.3.3.3.1.6.1

not-accessible

INT prtMonitoredPort

1.3.6.1.4.1.164.3.3.3.1.6.1.5

INTEGER

read-write

This object indicates the MONITORED Port Index that the Monitoring port monitors. The valid port number depends on the IO slot no., the installed card type and the port type: external, internal. * The external ports will according to the convention (for DXC): - first two digits will be: (IO slot number+10) - last one/two digits will be the port number within the card, in odd numbers: port1 = 1 port2 = 3 port3 = 5 etc... Example: port2 of IO slot 11 will be: 213 . * The internal ports will be according to the convention (for DXC): - first two digits will be: (IO slot number+10) - last one/two digits will be the port number within the card, in even numbers: port1 = 2 port2 = 4 port3 = 6 etc... Example: port2 of IO slot 11 will be: 214 . * 100 - no port monitored

OCT prtMonitoredTSs

1.3.6.1.4.1.164.3.3.3.1.6.1.6

OCTET STRING

read-write

This object indicates which TSs of the Monitored port, should be monitored. Each Bit of the Octet represents a TS: 31 ......0 MSB LSB Bit 0 will not be used. If the bit value is '1' - this TS should be monitored. For a T1 port, the valid raised bits ('1') are: 1..24. For an E1 port, the valid raised bits ('1') are: 1..31. Default: all bits='0' Agents that do not support this feature will send SIZE 0. This object can be Set as described only if prtMonitoringEnable=enabled.

INT prtMonitoringEnable

1.3.6.1.4.1.164.3.3.3.1.6.1.3

INTEGER

read-write

This object indicates if the prtMonitoringIdx is configured as a monitoring port or not. disabled = the port is NOT configured to monitor. Setting this object to this value will cause reset (to 0) of the prtMonitoringTSs and prtMonitoredTSs objects. enabled = the port IS configured to monitor.

INT prtMonitoringIdx

1.3.6.1.4.1.164.3.3.3.1.6.1.2

INTEGER

read-only

This object indicates the Monitoring Port Index. The valid port number depends on the IO slot no., the installed card type and the port type: external, internal. * The external ports will according to the convention (for DXC): - first two digits will be: (IO slot number+10) - last one/two digits will be the port number within the card, in odd numbers: port1 = 1 port2 = 3 port3 = 5 etc... Example: port2 of IO slot 11 will be: 213 . * The internal ports will be according to the convention (for DXC): - first two digits will be: (IO slot number+10) - last one/two digits will be the port number within the card, in even numbers: port1 = 2 port2 = 4 port3 = 6 etc... Example: port2 of IO slot 11 will be: 214 .

OCT prtMonitoringTSs

1.3.6.1.4.1.164.3.3.3.1.6.1.4

OCTET STRING

read-write

This object indicates which TSs of the Monitoring port, the test equipment should monitor. Each Bit of the Octet represents a TS: 31 ......0 MSB LSB Bit 0 will not be used. If the bit value is '1' - this TS should be monitored. For a T1 port, the valid raised bits ('1') are: 1..24. For an E1 port, the valid raised bits ('1') are: 1..31. Default: all bits='0' Agents that do not support this feature will send SIZE 0. This object can be Set as described only if prtMonitoringEnable=enabled.

prtMonTable

1.3.6.1.4.1.164.3.3.3.1.6

not-accessible

The write operation into the Table's Objects is valid only for the TmpCnfg entry (Scratch).

prtMux

1.3.6.1.4.1.164.3.2.3

prtParam

1.3.6.1.4.1.164.6.2.15.5

prtParamEntry

1.3.6.1.4.1.164.6.2.15.5.1.1

not-accessible

INT prtParamIdx

1.3.6.1.4.1.164.6.2.15.5.1.1.1

INTEGER

read-only

This object is an index of the specific port or interface. For a port, the index will be as agreed between agent and application. For an interface, ifIndex may be used.

prtParamTable

1.3.6.1.4.1.164.6.2.15.5.1

not-accessible

This table includes the connector type of ports or interfaces.

INT prtPerfBBE

1.3.6.1.4.1.164.6.2.15.3.1.1.7

INTEGER

read-only

Number of Background Block (or Frame) Errors for the reference period (prtPerfPeriodRef).

INT prtPerfBlocksPerSec

1.3.6.1.4.1.164.6.2.15.3.1.1.8

INTEGER

read-only

Blocks per second (or frames per second) of the port/interface indicated by portIdx. This object is constant for a certain port/interface. It is not affected by the prtPerfPeriodRef index.

INT prtPerfElapsedTime

1.3.6.1.4.1.164.6.2.15.3.1.1.3

INTEGER

read-only

Elapsed Time in seconds. - for prtPerfPeriodRef=currentPeriod: The period since last prtPerfSaveAndResetCmd received or since Start-up (if no prtPerfSaveAndResetCmd was received since Start-up) until now. - for prtPerfPeriodRef=lastPeriod: The value of prtPerfElapsedTime when last prtPerfSaveAndResetCmd was received.

prtPerfEntry

1.3.6.1.4.1.164.6.2.15.3.1.1

not-accessible

INT prtPerfES

1.3.6.1.4.1.164.6.2.15.3.1.1.5

INTEGER

read-only

Number of Errored Seconds for the reference period (prtPerfPeriodRef).

INT prtPerfIdx

1.3.6.1.4.1.164.6.2.15.3.1.1.1

INTEGER

read-only

This object is an index of the specific port or interface. For a port, the index will be as agreed between agent and application. For an interface, ifIndex may be used.

prtPerformance

1.3.6.1.4.1.164.6.2.15.3

INT prtPerfPeriodRef

1.3.6.1.4.1.164.6.2.15.3.1.1.2

INTEGER

read-only

This object is an index that specifies which period of time, the next 5 objects refer to. currentPeriod - the period since last prtPerfSaveAndResetCmd received or since Start-up (if no prtPerfSaveAndResetCmd was received since Start-up) until now. lastPeriod - the period between last two commands of prtPerfSaveAndResetCmd. - If only one command occured since Start-up: the period between Start-up and last command. - If no command occured since Start-up: this period will not actually exist. In this case, he following 5 objects will be 0.

INT prtPerfSaveAndResetCmd

1.3.6.1.4.1.164.6.2.15.3.1.1.10

INTEGER

read-write

A command per port/interface, to Save data of Current Period in Last Period data-set and start a new counting period for Current Period. This object is applicable only for prtPerfPeriodRef=currentPeriod. Setting this object to on(3) for prtPerfPeriodRef=last, will cause the agent to return: Bad Value response. When setting validly this object to on(3), agent will perform the required command and will reset automatically the value of this object to off(2). Setting this object to off(2), will do nothing.

INT prtPerfSES

1.3.6.1.4.1.164.6.2.15.3.1.1.6

INTEGER

read-only

Number of Severely Errored Seconds for the reference period (prtPerfPeriodRef).

prtPerfTable

1.3.6.1.4.1.164.6.2.15.3.1

not-accessible

This table includes G.826 ports or interfaces.

TIK prtPerfTimeTag

1.3.6.1.4.1.164.6.2.15.3.1.1.9

TimeTicks

read-only

Time Tag of Last Period: sysUpTime when last prtPerfSaveAndResetCmd was executed. This object is applicable only for prtPerfPeriodRef=lastPeriod. For prtPerfPeriodRef=currentPeriod, the value will always be 0.

INT prtPerfUAS

1.3.6.1.4.1.164.6.2.15.3.1.1.4

INTEGER

read-only

Number of Unavailable Seconds for the reference period (prtPerfPeriodRef).

prtPh1MlCnfg

1.3.6.1.4.1.164.3.2.3.2.2

INT prtPhMlBus

1.3.6.1.4.1.164.3.2.3.2.2.5.1.11

INTEGER

read-write

The TDM BUS this port is linked to.

INT prtPhMlCAS

1.3.6.1.4.1.164.3.2.3.2.2.5.1.6

INTEGER

read-write

This attribute indicates whether Channel Associated Signaling (CAS) is used.

INT prtPhMlClockMode

1.3.6.1.4.1.164.3.2.3.2.2.5.1.7

INTEGER

read-write

Clock mode.

prtPhMlCnfgEntry

1.3.6.1.4.1.164.3.2.3.2.2.5.1

not-accessible

INT prtPhMlCnfgIdx

1.3.6.1.4.1.164.3.2.3.2.2.5.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.

prtPhMlCnfgTable

1.3.6.1.4.1.164.3.2.3.2.2.5

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry.

INT prtPhMlConnect

1.3.6.1.4.1.164.3.2.3.2.2.5.1.4

INTEGER

read-write

This attribute indicates whether the port should be considered in any of the mux algorithms.

INT prtPhMlDialProcess

1.3.6.1.4.1.164.3.2.3.2.2.5.1.9

INTEGER

read-write

Dial Process.

INT prtPhMlMfSyncSlot

1.3.6.1.4.1.164.3.2.3.2.2.5.1.12

INTEGER

read-write

This attribute indicates whether the sync is synchronized according to a certain card and the slot of this card. This operation is required in order to bypass signaling of PCM voice channels. In the ?004 Unit the entries io6(10)..io12(16) are not valid

INT prtPhMlPrtIdx

1.3.6.1.4.1.164.3.2.3.2.2.5.1.3

INTEGER

read-only

This attribute indicates a unique port number. ML-20 cards have just one external interface.

INT prtPhMlRate

1.3.6.1.4.1.164.3.2.3.2.2.5.1.5

INTEGER

read-write

This attribute indicates the port speed.

INT prtPhMlSatBuffer

1.3.6.1.4.1.164.3.2.3.2.2.5.1.8

INTEGER

read-write

Satellite Buffer (+/- 256).

INT prtPhMlSltIdx

1.3.6.1.4.1.164.3.2.3.2.2.5.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the module is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid.

INT prtPhMlSyncRestore

1.3.6.1.4.1.164.3.2.3.2.2.5.1.10

INTEGER

read-write

Sync Restoration time, in seconds. notApplicable=0.

prtPhPlCnfg

1.3.6.1.4.1.164.3.2.3.2.3

prtPVc4Cnfg

1.3.6.1.4.1.164.3.2.3.2.9

INT prtSActiveStatus

1.3.6.1.4.1.164.3.1.4.1.1.1.5

INTEGER

read-only

This attribute describes the activity status of the port. unknown(1) indicates that the information is not supported. notUsed(2) indicates that the ch is not connected according to the active config. offLine(3) indicates that the ch is down (not working) because of any problem. onLine(4) indicates that the ch is up (working) offLineRedundancy(5) indicates that the ch is down, because it is redundant port. onLineRedundancy(6) indicates that the ch is up, and it is the active link

INT prtSAlarmCode

1.3.6.1.4.1.164.3.3.3.1.4.1.1.3

INTEGER

read-only

This object indicates a code related to a specific alarm description. The list of codes and their related descriptions will be sent to NMS request (for display purpose) by alrGenTable.

prtSAlarmEntry

1.3.6.1.4.1.164.3.3.3.1.4.1.1

not-accessible

INT prtSAlarmIdx

1.3.6.1.4.1.164.3.3.3.1.4.1.1.1

INTEGER

read-only

A unique number to identify an entry in the alarm status table. Users should use the get next function to read this table because the indexes are not consecutive.

INT prtSAlarmInvert

1.3.6.1.4.1.164.3.3.3.1.4.1.1.6

INTEGER

read-only

Alarm Invert is : on/off.

INT prtSAlarmMask

1.3.6.1.4.1.164.3.3.3.1.4.1.1.5

INTEGER

read-only

Alarm Mask is : on/off.

INT prtSAlarmPrtIdx

1.3.6.1.4.1.164.3.3.3.1.4.1.1.2

INTEGER

read-only

This attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outside/external, inside/internal. In the Kilomux, the port index is calculated as follows: 100*Slot+Ch. The external Ch numbers are 1..10, and the internal Ch numbers are 11..20. In the DXC : - first two digits will be: (IO slot number+10) - last one/two digits will be the port number within the card in odd or even numbers, as follows: * For the outside/external ports, in odd numbers: port1 = 1 port2 = 3 port3 = 5 etc... Example: port2 of IO slot 11 will be: 213 . * The inside/internal ports, in even numbers: port1 = 2 port2 = 4 port3 = 6 etc... Example: port2 of IO slot 11 will be: 214 .

INT prtSAlarmState

1.3.6.1.4.1.164.3.3.3.1.4.1.1.4

INTEGER

read-only

This object indicates the port alarm state.

prtSAlarmTable

1.3.6.1.4.1.164.3.3.3.1.4.1

not-accessible

INT prtSAlrCode

1.3.6.1.4.1.164.3.1.4.1.2.1.5

INTEGER

read-only

A code identifying the alarm of an entry in the alarm status table at port level.

STR prtSAlrCodeDescription

1.3.6.1.4.1.164.3.1.4.1.2.1.4

DisplayString

read-only

This attribute is a full text description of the alarm. The alarm description includes the following information: alarm code, alarm text, alarm severity, Masked or Inverted flag and counter.

INT prtSAlrCounter

1.3.6.1.4.1.164.3.1.4.1.2.1.8

INTEGER

read-only

A counter - how many times the alarm occured since last clear operation. ON and OFF Alarm will be counted separately.

prtSAlrEntry

1.3.6.1.4.1.164.3.1.4.1.2.1

not-accessible

INT prtSAlrIdx

1.3.6.1.4.1.164.3.1.4.1.2.1.1

INTEGER

read-only

A unique number to identify an entry in the alarm status table. Users should use the get next function to read this table because the indexes are not consecutive

INT prtSAlrInvert

1.3.6.1.4.1.164.3.1.4.1.2.1.10

INTEGER

read-only

Alarm invert : on/off.

INT prtSAlrMask

1.3.6.1.4.1.164.3.1.4.1.2.1.9

INTEGER

read-only

Alarm mask : on/off.

INT prtSAlrPrtIdx

1.3.6.1.4.1.164.3.1.4.1.2.1.3

INTEGER

read-only

This attribute indicates a unique identifier of the port the alarm applies to. All the values are valid. No alarms exist for a port which does not physically exist. Valid values: exPrt1 (1) .. exPrt12 (12) , inPrt1 (101) .. inPrt48 (148).

INT prtSAlrSeverity

1.3.6.1.4.1.164.3.1.4.1.2.1.6

INTEGER

read-only

The severity of the alarm.

INT prtSAlrSltIdx

1.3.6.1.4.1.164.3.1.4.1.2.1.2

INTEGER

read-only

This attribute indicates a unique identifier of the slot where the card is inserted. In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io12(16) are not valid.

INT prtSAlrState

1.3.6.1.4.1.164.3.1.4.1.2.1.7

INTEGER

read-only

State of the alarm.

INT prtSAlrStatus

1.3.6.1.4.1.164.3.1.4.1.1.1.6

INTEGER

read-only

Indicates the alarm state in the port(ch) agent level. This attribute will be set to: critical(7) - when there is at least one active (state ON) critical alarm, otherwise it will be set to major(5) - when there is at least one active (state ON) major alarm, otherwise it will be set to minor(4) - if there is at least one active (state ON) minor alarm, otherwise it will be set to warning(6) - if there is at least one active (state ON) warning alarm, otherwise it will be set to event(3) - if there was at least one alarm event (including state on,off events) since the last clear operation.

prtSAlrTable

1.3.6.1.4.1.164.3.1.4.1.2

not-accessible

The list of port agent alarms.

INT prtSBertClrCmd

1.3.6.1.4.1.164.3.1.4.1.1.1.12

INTEGER

read-write

Setting this attribute initiates bert count clear operation. It is valid only when bert test is active on the specific port.

INT prtSBertTstRslt

1.3.6.1.4.1.164.3.1.4.1.1.1.13

INTEGER

read-only

This attribute indicates the number of Bit Error Rate indicated during the BERT operation. It is valid only when bert test is active on the specific port.

INT prtSClearAlrCmd

1.3.6.1.4.1.164.3.1.4.1.1.1.8

INTEGER

read-write

Setting this attribute to on(3) enforces a clear operation of the alarm status events in the given port. The clear operation will not be applied for masked/inverted alarms.

INT prtSExHsfInterfaceTyp

1.3.6.1.4.1.164.3.2.3.1.6.1.3

INTEGER

read-only

This attribute indicates a unique interface type of a selected port.

INT prtSExHsfPrtIdx

1.3.6.1.4.1.164.3.2.3.1.6.1.2

INTEGER

read-only

This attribute indicates a unique port number.

INT prtSExHsfRts

1.3.6.1.4.1.164.3.2.3.1.6.1.4

INTEGER

read-only

This attribute indicates a unique RTS control signal state.

INT prtSExHsfSltIdx

1.3.6.1.4.1.164.3.2.3.1.6.1.1

INTEGER

read-only

This attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid.

prtSExHsfStatEntry

1.3.6.1.4.1.164.3.2.3.1.6.1

not-accessible

prtSExHsfStatTable

1.3.6.1.4.1.164.3.2.3.1.6

not-accessible

prtSInstEntry

1.3.6.1.4.1.164.3.1.4.1.1.1

not-accessible

INT prtSInstIfIndex

1.3.6.1.4.1.164.3.1.4.1.1.1.4

INTEGER

read-only

This attribute indicates the unique interface number assigned to the port. The specific interface of this attribute is the same as the interface identified by the value of ifindex in MIB-II.If there is no interface for the specific prtIdx the value will be '7fffffff'h.

INT prtSInstPrtIdx

1.3.6.1.4.1.164.3.1.4.1.1.1.2

INTEGER

read-only

This attribute indicates a unique number to identify a port in a specific card. The valid ports depend on the installed card: the valid external ports (interfaces) are (1..mdlCNoOfExternPrt) if any, and the valid internal ports are (101..100+mdlCNoOfInternPrt) if any. Generally: exPrt1 (1) .. exPrt12 (12), inPrt14 (114) .. inPrt48 (148)

INT prtSInstPrtType

1.3.6.1.4.1.164.3.1.4.1.1.1.3

INTEGER

read-only

This attribute describes the type of the designated port. In MX 3000 only external & internal options are used. All the other options are only for MX 30/300 which need special handling. In order to support interface types in MX 3000, return an ascii string for prtSInterfaceType in this table or support the general RAD value of physicalConnector. External port - is a port with a physical connector. Internal port - might be of two types: a) A composite port which collects a few external ports data into a common bandwidth (usually routed through DS1 link) b) A port which gets only part of the external ports (usually a few DS0's) The following types are used when all ports are external/ internal and the connector/interface type is necessary (for example, stand-alone units): High Speed port types Low Speed port types Voice port types, CL port types.

INT prtSInstSltIdx

1.3.6.1.4.1.164.3.1.4.1.1.1.1

INTEGER

read-only

This attribute indicates a unique number to identify the slot where the card is inserted. In the ?004 Unit the entries io6(10)..io(16) are not valid.

prtSInstTable

1.3.6.1.4.1.164.3.1.4.1.1

not-accessible

STR prtSInterfaceType

1.3.6.1.4.1.164.3.1.4.1.1.1.14

DisplayString

read-only

This attribute indicates a unique HW interface type of the selected port.

INT prtSMaskedAlrStat

1.3.6.1.4.1.164.3.1.4.1.1.1.7

INTEGER

read-only

Indicates the alarm state in the port(ch) agent level, including Masked alarms. This attribute will be set to: critical(7) - when there is at least one active (state ON) critical alarm, otherwise it will be set to major(5) - when there is at least one active (state ON) major alarm, otherwise it will be set to minor(4) - if there is at least one active (state ON) minor alarm, otherwise it will be set to warning(6) - if there is at least one active (state ON) warning alarm, otherwise it will be set to event(3) - if there was at least one alarm event (including state on,off events) since the last clear operation.

prtSP

1.3.6.1.4.1.164.3.3.3.4

INT prtSpActCallOut

1.3.6.1.4.1.164.3.3.3.4.1.1.20

INTEGER

read-write

This object indicates when to Activate Call-Out. It is used by FCD-T1/E1. always - to activate call-out always. linkFail - to activate call-out only when Link of Inband Management fails.

INT prtSpAlrRelayMode

1.3.6.1.4.1.164.3.3.3.4.1.1.21

INTEGER

read-write

This attribute indicates the Alarm Relay Mode. notApplicable - for DP.

STR prtSpAltNum

1.3.6.1.4.1.164.3.3.3.4.1.1.17

DisplayString

read-write

For DXC - this object is applicable only for port (2) = DP. It is the Alternate dialing number. This number is applicable only if prtSpAltNumMode is 'yes'.

INT prtSpAltNumMode

1.3.6.1.4.1.164.3.3.3.4.1.1.15

INTEGER

read-write

For DXC - this object is applicable only for port (2) = DP. It determines wether to use the alternate number or not. Default = no.

OCT prtSParamStatus

1.3.6.1.4.1.164.3.1.4.1.1.1.15

OCTET STRING

read-only

This object indicates Status of parameters specific to the selected port. - For a port that has no special status or is supported by prtSExHsfStatTable - 1 Octet: 00hex - For VC-6, VC-12, VC-12/6 external ports - 1 Octet : Bit 7 (MSB)..Bit 2 = 0 (NA) Bit 1: Tx Signaling '1'=On ; '0'=Off Bit 0 (LSB): Rx Signaling '1'=On ; '0'=Off - For VC-6A and VC-6AG external ports - 1 Octet : Bit 7 (MSB)..Bit 3 = 0 (NA) Bit 2: ADPCM module '1' =Exist ; '0' =Not Exist Bit 1: Tx Signaling '1'=On ; '0'=Off Bit 0 (LSB): Rx Signaling '1'=On ; '0'=Off - For VC-2/R2(FXS) external ports - 1 Octet : Bit - 7 6 5 4 3 2 1 0 |_| |_________| Call Call State Direction Bit 7 (MSB) and Bit 6 : Call Direction 00 - Incoming 01 - Outgoing Bit 5..Bit 0: Call State 000000 - Idle 000001 - Seized 000010 - Both-Way Conflict 000011 - Seizure Ack 000100 - Answered 000101 - Clear Backward 000110 - Clear Forward 000111 - Blocked 001000 - Fault 001001 - Fault 3 001010 - Fault 4 001011 - Fault 5 001100 - Fault 6 001101 - Fault 7 - For ML-20 external port - 3 Octets : - 1 MS Octet will represent the Real Rate used: Bit - 7 6 5 4 3 2 1 0 |___| |_______| spare Rate Valid values: 0..31, meaning 0..31x64Kbps Invalid values: 32..255. - 2 LS Octets will represent the Status of 7 Control Signals: Signal - --- CTS DSR DCD RJ TM DTR RTS Bit - 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 Octet - 2 3 (LS) '---' will always have the value 00 Rest of the Signals (2 bits each) can have the following values: 00=NA ; 01=unused ; 10=Off ; 11=On - For ML-H/E1, ML-H/1/E1, ML-H/S/E1 internal port - 1 Octet Bit - 7 6 5 4 3 2 1 0 |___________| spare Mode of Operation Mode of Operation: '1'=Central ; '0'=Remote - For ACM external port - 1 Octet Bit - 7 6 5 4 3 2 1 0 |_________| spare Alarm State Alarm State: according to bits 1,0: 00=NA ; 01=unused ; 10=Off ; 11=On - For HS-U/1 external port - 1 Octet Bit 7 6 5 4 3 2 1 0 LSB |________| |__| |__| spare modem sync modem: 00 = unknown sync: 00 = not sync 01 = ASMi-31 01 = sync 10 = other 10 = reserved 11 = reserved 11 = reserved

INT prtSpCallOutMode

1.3.6.1.4.1.164.3.3.3.4.1.1.7

INTEGER

read-write

This attribute indicates the call-out mode. For DXC - this object is applicable only for the DP port (2).

OCT prtSpCmd

1.3.6.1.4.1.164.3.3.3.4.1.1.19

OCTET STRING

read-write

SP Command. For LRS this parameter will be used for a Modem Command. Upon NMS's Get operation for devices that this parameter is notApplicable, agent will send NULL string.

prtSpCnfgEntry

1.3.6.1.4.1.164.3.3.3.4.1.1

not-accessible

All the entries at this table are identical(have the same value) at all the configurations(1..255) except at the TmpCnfg. - For products supporting more than one configuration, the write operation into the Table Objects is valid only at the TmpCnfg entry. - For products that do not support configurations, the write operation into the Table Objects will be to prtSpCnfgIdx=1.

INT prtSpCnfgIdx

1.3.6.1.4.1.164.3.3.3.4.1.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg(1..255) being accessed. Idx of 255 relates to the TmpCnfg.

prtSpCnfgTable

1.3.6.1.4.1.164.3.3.3.4.1

not-accessible

INT prtSpCTS

1.3.6.1.4.1.164.3.3.3.4.1.1.9

INTEGER

read-write

CTS line state. This object is applicable only for port (1) = SP

INT prtSpDataBits

1.3.6.1.4.1.164.3.3.3.4.1.1.5

INTEGER

read-write

This attribute indicates the number of data bits in async frame

INT prtSpDcdDelay

1.3.6.1.4.1.164.3.3.3.4.1.1.10

INTEGER

read-write

DCD delay in msec. d10 = delay of 10msec. This object is applicable only for port (1) = SP

INT prtSpDialMode

1.3.6.1.4.1.164.3.3.3.4.1.1.14

INTEGER

read-write

For DXC - this object is applicable only for port (2) = DP. Dialing mode. Default=tone

INT prtSpDsr

1.3.6.1.4.1.164.3.3.3.4.1.1.11

INTEGER

read-write

DSR line state. This object is applicable only for port (1) = SP

prtSpEntry

1.3.6.1.4.1.164.6.2.15.2.1.1

not-accessible

Supervisory port parameter table.

INT prtSpInterface

1.3.6.1.4.1.164.3.3.3.4.1.1.8

INTEGER

read-write

This attribute indicates the supervisory port interface. dce - the DACS appears as a DCE for the port. dte - the DACS operates as a DTE, for connection via modem, for the port. Port 2 - when DP, will be always dte(2).

INT prtSpNoOfRetries

1.3.6.1.4.1.164.3.3.3.4.1.1.12

INTEGER

read-write

For DXC - this object is applicable only for port (2) = DP. The number of dialing retries requested. Default = 0

INT prtSpParity

1.3.6.1.4.1.164.3.3.3.4.1.1.6

INTEGER

read-write

This attribute indicates the parity mode in async frame

STR prtSpPrimaryNum

1.3.6.1.4.1.164.3.3.3.4.1.1.16

DisplayString

read-write

For DXC - this object is applicable only for port (2) = DP. It is the Primary dialing number.

INT prtSpPrtIdx

1.3.6.1.4.1.164.3.3.3.4.1.1.2

INTEGER

read-only

This attribute indicates a unique port number of the SPor DP port. For DXC, it is the port in the active DCL card: - SP = 1 - NP ; DP = 2 For Kilomux, the port index is calculated as follows: 100*Slot+Ch. For FCD, PRBi, the SP port index=1.

INT prtSpRate

1.3.6.1.4.1.164.3.3.3.4.1.1.4

INTEGER

read-write

This attribute indicates the operation rate (speed) of the port. auto - automatic rate selection, by the agent.

INT prtSpRoutProtocol

1.3.6.1.4.1.164.3.3.3.4.1.1.18

INTEGER

read-write

This attribute indicates the routing protocol of the port. notApplicable - for DP.

prtSpTable

1.3.6.1.4.1.164.6.2.15.2.1

not-accessible

INT prtSpUsage

1.3.6.1.4.1.164.3.3.3.4.1.1.3

INTEGER

read-write

This attribute indicates what is the usage of the port.

INT prtSpWaitForConnect

1.3.6.1.4.1.164.3.3.3.4.1.1.13

INTEGER

read-write

For DXC - this object is applicable only for port (2) = DP. Waiting time for connect, in seconds. Default = 30 sec.

NTF prtStatusChangeTrap

1.3.6.1.4.1.164.6.1.0.3

This trap is sent whenever the state of a port changed. Attached, will be parameter/s that indicate the new port status. The attached variables will be specified in the specifications of the products supporting this trap.

INT prtSTestMask

1.3.6.1.4.1.164.3.1.4.1.1.1.9

INTEGER

read-only

This is a mask which indicates which tests from the 'prtSTstCmd' list are allowed for the requested port. If a specific test is allowed, its respective bit will be SET in the mask : TEST BIT ----------- --- local-loop 1 remote-loop 2 loc-and-rem-main-loops 3 remote-analog-loop 4 remote-digital-loop 5 rem-loop-on-ext-unit 6 bert 7 tone-injection 8 dlci local-loop 9 all dlci local-loop 10 dlci remote-loop 11 all dlci remote-loop 12 bert-and-rem-loop-on-rem-unit 13 rem-loop-on-rem-unit 14 block 15 backward-tone-inject 16 llb 17 rlb 18 ft1Enable 21 lbbd 22 --for 2B+D lb1 23 --for B1 lb2 24 --for B2 e.g : If the return value is 3 -> 0000000000000011 -> Bits 1 & 2 are set -> the allowed tests are : local-loop remote-loop

INT prtSTstCmd

1.3.6.1.4.1.164.3.1.4.1.1.1.10

INTEGER

read-write

Setting this attribute to any of the above values will initiate a test on the specific port if the operation is legal. If the operation is not legal, the mux will ignore the operation. If a test time out is needed, the test will be set with a default timeout of 2 minutes until the user will set the parameter 'prtSTstDuration' to the required time out. If no time out is needed , the test will be set with infinite timeout until the user will set the parameter 'prtSTstDuration' to the required time out.

INT prtSTstDuration

1.3.6.1.4.1.164.3.1.4.1.1.1.11

INTEGER

read-write

This attribute indicates the maximum duration of executing a test on the specific port. This entry applies to all the test operations. The resolution will be a minute, and the maximum duration is limited to 30 minutes . A zero value specifies no time limitation. When the test isn't active, the agent initiates this object to 2 when the duration is needed and to 0 if its not required. The user should set this parameter after setting the 'prtSTstCmd' parameter.

prtSupervisory

1.3.6.1.4.1.164.6.2.15.2

INT prtSupervisoryCTS

1.3.6.1.4.1.164.6.2.15.2.1.1.8

INTEGER

read-write

CTS line state.

INT prtSupervisoryDataBits

1.3.6.1.4.1.164.6.2.15.2.1.1.3

INTEGER

read-write

This attribute indicates the number of data bits in an async frame

INT prtSupervisoryDcdDelay

1.3.6.1.4.1.164.6.2.15.2.1.1.9

INTEGER

read-write

DCD delay in msec.

INT prtSupervisoryDSR

1.3.6.1.4.1.164.6.2.15.2.1.1.10

INTEGER

read-write

DSR line state.

INT prtSupervisoryIndex

1.3.6.1.4.1.164.6.2.15.2.1.1.1

INTEGER

read-only

The SP port index. The LS byte of the integer is the port index 1..255. The MS byte is different than 0 only if the port belongs to a module. In that case it is the module number.

INT prtSupervisoryInterface

1.3.6.1.4.1.164.6.2.15.2.1.1.7

INTEGER

read-write

This attribute indicates the supervisory port interface.

INT prtSupervisoryParity

1.3.6.1.4.1.164.6.2.15.2.1.1.4

INTEGER

read-write

This attribute indicates the parity mode in an async frame

INT prtSupervisoryRate

1.3.6.1.4.1.164.6.2.15.2.1.1.2

INTEGER

read-write

This attribute indicates the operation rate (speed) of the port. auto - automatic rate selection, by the agent.

INT prtSupervisoryRoutProtocol

1.3.6.1.4.1.164.6.2.15.2.1.1.11

INTEGER

read-write

This attribute indicates the routing protocol of the port. notApplicable - for DP.

INT prtSupervisoryStopBits

1.3.6.1.4.1.164.6.2.15.2.1.1.5

INTEGER

read-only

This attribute indicates the parity mode in an async frame.

INT prtSupervisoryUsage

1.3.6.1.4.1.164.6.2.15.2.1.1.6

INTEGER

read-write

This attribute indicates the usage of the SP port.

prtT1E1

1.3.6.1.4.1.164.3.3.3.2

GAU prtT1E1BpvLastMin

1.3.6.1.4.1.164.3.3.3.2.1.1.4

Gauge

read-only

This object is applicable only for an E1 active port. It provides the number of BPV (BiPolar Violation) events detected during the last minute.

GAU prtT1E1BpvMax

1.3.6.1.4.1.164.3.3.3.2.1.1.5

Gauge

read-only

This object is applicable only for an E1 active port. It provides the maximal number of BPV (BiPolar Violation) events (per minute), detected during the worst minute.

INT prtT1E1CGA

1.3.6.1.4.1.164.3.3.3.2.2.1.10

INTEGER

read-write

This object selects the method used to signal the CGA state to the other end, through the main/sub link. 'none' - non-transparent mode. When one of the links (main/sub) will be in Out Of Service state, both 'Data/Voice Oos' and 'Oos Signal' will be transmitted to the other end. 'trans' - when one of the links (main/sub) will be in Out Of Service state, 'Data/Voice Oos' will be transmitted to the other end. 'full' - fully-transparent mode. When one of the links (main/sub) will be in Out Of Service state, neither 'Data/Voice Oos' nor 'Oos Signal' will be transmitted to the other end.

prtT1E1CnfgEntry

1.3.6.1.4.1.164.3.3.3.2.2.1

not-accessible

An entry in the T1/E1 port configuration table.

INT prtT1E1CnfgIdx

1.3.6.1.4.1.164.3.3.3.2.2.1.1

INTEGER

read-only

This attribute indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config.

prtT1E1CnfgTable

1.3.6.1.4.1.164.3.3.3.2.2

not-accessible

T1/E1 port configuration table.

OCT prtT1E1DataOos

1.3.6.1.4.1.164.3.3.3.2.2.1.14

OCTET STRING

read-write

Data Out-Of-Service code. Valid range: (0 - FF HEX). For agents that do not support this feature, the value will always be 0.

INT prtT1E1DedicatedTs

1.3.6.1.4.1.164.3.3.3.2.2.1.19

INTEGER

read-write

A unique number to identify Dedicated TS of the T1/E1 port. It is applicable only when prtExT1E1InbandMng selected is dedicatedTs. 1..24 - Dedicated TS of T1 1..31 - Dedicated TS of E1 255 - notApplicable (for agents that do not support this feature) Other values are invalid.

INT prtT1E1Fdl

1.3.6.1.4.1.164.3.3.3.2.2.1.7

INTEGER

read-write

This bitmap describes the use of the facili- ties data link, and is the sum of the capabili- ties: 'other' indicates that a protocol other than one following is used. 'ansi-T1-403' refers to the FDL exchange recommended by ANSI. 'att-54016' refers to ESF FDL exchanges. 'fdl-none' indicates that the device does not use the FDL. 'transFdl' indicates transition between two ports of the same card.

INT prtT1E1FdlMode

1.3.6.1.4.1.164.3.3.3.2.2.1.8

INTEGER

read-write

Fdl Mode of the T1 selected port. notApplicable - will be used for an E1 port.

OCT prtT1E1FdlMsg

1.3.6.1.4.1.164.3.3.3.2.3.1.4

OCTET STRING

read-only

FDL message.

prtT1E1FdlMsgEntry

1.3.6.1.4.1.164.3.3.3.2.3.1

not-accessible

INT prtT1E1FdlMsgFdlType

1.3.6.1.4.1.164.3.3.3.2.3.1.2

INTEGER

read-only

The Fdl type reference of the Fdl message.

INT prtT1E1FdlMsgPrtIdx

1.3.6.1.4.1.164.3.3.3.2.3.1.1

INTEGER

read-only

This attribute indicates a unique port number. The same numbering as for prtGenPrtIdx. The valid port number depends on the IO slot no., the installed card type and the port type: outside, inside. * The outside ports will be the T1/E1 cards ports. The convention used will be (for DXC): - first two digits will be: (IO slot number+10) - last one/two digits will be the port number within the card, in odd numbers: port1 = 1 port2 = 3 port3 = 5 etc... Example: port2 of IO slot 11 will be: 213 .

INT prtT1E1FdlMsgSlt

1.3.6.1.4.1.164.3.3.3.2.3.1.3

INTEGER

read-only

This attribute indicates a unique number to identify the slot where the card is inserted in. When the unit is stand-alone, this object is not applicable and 255 will be used.

prtT1E1FdlMsgTable

1.3.6.1.4.1.164.3.3.3.2.3

not-accessible

This table is applicable for a T1 interface with 'esf' LineType or E1 interface, when CRC is enabled (LineType).

OCT prtT1E1IdleCode

1.3.6.1.4.1.164.3.3.3.2.2.1.11

OCTET STRING

read-write

This object selects the code transmitted to fill idle (unused) time slots in the main link frame. Valid range: (0 - FF HEX) .

INT prtT1E1InbandMng

1.3.6.1.4.1.164.3.3.3.2.2.1.17

INTEGER

read-write

A unique number to identify an Inband management over the link. internal - supported by KM-2100 only. It means that the management is internal to the frame. It takes part of the ML Frame bits (instead of data).

INT prtT1E1InbandMngRate

1.3.6.1.4.1.164.3.3.3.2.2.1.18

INTEGER

read-write

A unique number to identify the rate of the Inband management. It is required only for E1 links and is applicable only when prtExT1E1InbandMng selected is FdlOrTs0 or dedicatedTs.

INT prtT1E1InbandMngRoutProt

1.3.6.1.4.1.164.3.3.3.2.2.1.20

INTEGER

read-write

Inband Mng Routing Protocol of the port. When prtT1E1InbandMng is 'dedicatedPpp'-'proprietary' and 'rip2' are applicable. For other values - only 'proprietary' is applicable.

INT prtT1E1LineCode

1.3.6.1.4.1.164.3.3.3.2.2.1.5

INTEGER

read-write

This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its characteristics. jbzs=b7zs refers the Jammed Bit Zero Suppres- sion, in which the AT&T specification of at least one pulse every 8 bit periods is literal- ly implemented by forcing a pulse in bit 8 of each channel. Thus, only seven bits per chan- nel, or 1.344 Mbps, is available for data (used for T1). b8zs refers to the use of a specified pattern of normal bits and bipolar violations which are used to replace a sequence of eight zero bits (used for T1). ANSI Clear Channels may use zbtsi, or Zero Byte Time Slot Interchange. E1 links, with or without CRC, use hdb3 or ami (= TRAN). amI (=TRAN) refers to a mode wherein no zero code suppression is present and the line encoding does not solve the problem directly. In this application, the higher layer must provide data which meets or exceeds the pulse density re- quirements, such as inverting HDLC data.

INT prtT1E1LineLengthMask

1.3.6.1.4.1.164.3.3.3.2.2.1.15

INTEGER

read-write

This attribute is the line length mask parameter used only for T1/DSU interfaces. len400p533ft=length range: 400ft to 533ft 'fcc68' - provides compliance with the FCC 68.308 Option A output pulse mask.

INT prtT1E1LineMode

1.3.6.1.4.1.164.3.3.3.2.2.1.25

INTEGER

read-write

Interface type of the port. For T1 - csu, dsu are the valid values For E1 - dsu, ltu are the valid values

INT prtT1E1LineType

1.3.6.1.4.1.164.3.3.3.2.2.1.4

INTEGER

read-write

This variable indicates the variety of T1/E1 Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reasonably carry, as well as the interpretation of the usage and error statistics. The values, in sequence, describe: TITLE: SPECIFICATION: esf Extended SuperFrame DS1 d4 AT&T D4 format DS1 - SF e1 CCITT Recommendation G.704 (Table 4a) - G732N e1Crc CCITT Recommendation G.704 (Table 4b) - G732N with CRC e1MF G.704 (Table 4a) with TS16 multiframing enabled - G732S e1CrcMF G.704 (Table 4b) with TS16 multiframing enabled - G732S with CRC unframed T1 - applicable values: (1),(2),(3),(8) E1 - applicable values: (1),(4),(5),(6),(7),(8)

INT prtT1E1LinkMode

1.3.6.1.4.1.164.3.3.3.2.2.1.21

INTEGER

read-write

regular - TSs are connected by user via TS Assignment only transparent - when a port with this Link Mode is connected to an internal T1/E1 port of a T3/E3 card, TS0, TS16 and Fbit are transparently transferred to the E3/T3 stream.

INT prtT1E1Multiplier

1.3.6.1.4.1.164.3.3.3.2.2.1.22

INTEGER

read-write

The data rate of each TS. The multiplier values can be 56 kbps or 64 kbps. For T1 only.

GAU prtT1E1OosCount

1.3.6.1.4.1.164.3.3.3.2.1.1.3

Gauge

read-only

This object is applicable only for an E1 active port. It provides the number of red alarm events since the last count clearing.

INT prtT1E1OosSignal

1.3.6.1.4.1.164.3.3.3.2.2.1.12

INTEGER

read-write

'idle' = '0' = on-hook, idle state 'busy' = '1' = off-hook, busy state 'forcedIdle' = SP = both A and B signaling bits are forced to '0' during out-of-service periods. 'forcedBusy' = MK = both A and B signaling bits are forced to '1' during out-of-service periods. 'busyIdle' = MK_SP = A and B bits are forced to '1' for 2.5 seconds; then they are switched to '0' until out-of-service condition disappears. 'idleBusy' = SP_MK = A and B bits are forced to '0' for 2.5 seconds; then they are switched to '1' until out-of-service condition disappears. - for T1: '0'=0 ; '1'=1 - for E1: '0'=1 ; '1'=0

INT prtT1E1PrtIdx

1.3.6.1.4.1.164.3.3.3.2.2.1.2

INTEGER

read-only

This attribute indicates a unique port number. The same numbering as for prtGenPrtIdx. The valid port number depends on the IO slot no., the installed card type and the port type: outside, inside. In the DXC : - first two digits will be: (IO slot number+10) - last one/two digits will be the port number within the card in odd or even numbers, as follows: * For the outside/external ports, in odd numbers: port1 = 1 port2 = 3 port3 = 5 etc... Example: port2 of IO slot 11 will be: 213 . * The inside/internal ports, in even numbers: port1 = 2 port2 = 4 port3 = 6 etc... Example: port2 of IO slot 11 will be: 214 . In the Kilomux, the port index is calculated as follows: 100*Slot+Ch. The external Ch numbers are 1..10, and the internal Ch numbers are 11..20.

INT prtT1E1RAI

1.3.6.1.4.1.164.3.3.3.2.2.1.24

INTEGER

read-write

Remote Alarm Signal

INT prtT1E1RxGain

1.3.6.1.4.1.164.3.3.3.2.2.1.23

INTEGER

read-write

This attribute is the rx volume (dB).

INT prtT1E1SignalMode

1.3.6.1.4.1.164.3.3.3.2.2.1.6

INTEGER

read-write

'none' indicates that no bits are reserved for signaling on this channel. 'robbedBit' indicates that T1 Robbed Bit Signaling is in use. 'bitOriented' indicates that E1 Channel Associated Signaling (CAS) is in use. 'messageOriented' indicates that Common Channel Signaling (CCS) is in use either on channel 16 of an E1 link or channel 24 of a T1.

INT prtT1E1Slt

1.3.6.1.4.1.164.3.3.3.2.2.1.3

INTEGER

read-only

This attribute indicates a unique number to identify the slot where the card is inserted in. When the unit is stand-alone, this object is not applicable and 255 will be used.

INT prtT1E1SPrtIdx

1.3.6.1.4.1.164.3.3.3.2.1.1.1

INTEGER

read-only

This attribute indicates a unique port number. The same numbering as for prtGenPrtIdx. The valid port number depends on the IO slot no., the installed card type and the port type: outside, inside. * The outside ports will be the T1/E1 cards ports. The convention used will be (for DXC): - first two digits will be: (IO slot number+10) - last one/two digits will be the port number within the card, in odd numbers: port1 = 1 port2 = 3 port3 = 5 etc... Example: port2 of IO slot 11 will be: 213 .

INT prtT1E1SSlt

1.3.6.1.4.1.164.3.3.3.2.1.1.2

INTEGER

read-only

This attribute indicates a unique number to identify the slot where the card is inserted in. When the unit is stand-alone, this object is not applicable and 255 will be used.

prtT1E1StatEntry

1.3.6.1.4.1.164.3.3.3.2.1.1

not-accessible

An entry in the T1/E1 port statistics table.

prtT1E1StatTable

1.3.6.1.4.1.164.3.3.3.2.1

not-accessible

T1/E1 port statistics table.

INT prtT1E1Sync

1.3.6.1.4.1.164.3.3.3.2.2.1.9

INTEGER

read-write

This object enables returning to normal operation, after the end of a main/sub link red alarm event, in reduced time. 'tr62411' - complies with AT&T TR-62411 (after 10 seconds). Applicable for both T1 and E1 interfaces. 'ccitt' - complies with CCITT standard. Applicable only for E1 interfaces. 'fast' - after 1 second.

OCT prtT1E1TS0SaBits

1.3.6.1.4.1.164.3.3.3.2.2.1.26

OCTET STRING

read-write

This object is applicable only for E1 ports. For T1, string size will be 0. For E1, it enables user to select the use of TS0 Sa Bits 4..8, by 3 octets: The order (in hexa display): free Sa-Bit-4 Sa-Bit-5 Sa-Bit-6 Sa-Bit-7 Sa-Bit-8 |___________| |________________| |________________| MSByte LSByte Each Sa Bit will be represented by a nibble, having the following meaning: 0000 = zero 0001 = one 0010 = management 0011 = transparent the rest are reserved for future use.

INT prtT1E1TxGainMask

1.3.6.1.4.1.164.3.3.3.2.2.1.16

INTEGER

read-write

This attribute is the tx gain mask parameter (dB), used only for T1/CSU interfaces.

OCT prtT1E1VoiceOos

1.3.6.1.4.1.164.3.3.3.2.2.1.13

OCTET STRING

read-write

Voice Out-Of-Service code. Valid range: (0 - FF HEX). For agents that do not support this feature, the value will always be 0.

OCT prtT1FdlMsg

1.3.6.1.4.1.164.3.1.4.1.3.4.1.1.4

OCTET STRING

read-only

FDL message.

prtT1FdlMsgEntry

1.3.6.1.4.1.164.3.1.4.1.3.4.1.1

not-accessible

INT prtT1FdlMsgFdlTxRx

1.3.6.1.4.1.164.3.1.4.1.3.4.1.1.3

INTEGER

read-only

The Fdl tx/rx reference of the Fdl message.

INT prtT1FdlMsgPrtIdx

1.3.6.1.4.1.164.3.1.4.1.3.4.1.1.2

INTEGER

read-only

This attribute indicates a unique port number. MTML-1/T1 modules have just one external interface.

INT prtT1FdlMsgSltIdx

1.3.6.1.4.1.164.3.1.4.1.3.4.1.1.1

INTEGER

read-only

This attribute indicates a unique slot position where the module is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid.

prtT1FdlMsgTable

1.3.6.1.4.1.164.3.1.4.1.3.4.1

not-accessible

This table is applicable for a T1 interface with 'esf' LineType .

prtT1Statis

1.3.6.1.4.1.164.3.1.4.1.3.4

prtT3E3

1.3.6.1.4.1.164.3.3.3.8

prtT3E3CnfgEntry

1.3.6.1.4.1.164.3.3.3.8.1.1

not-accessible

An entry in the T3/E3 port configuration table.

INT prtT3E3CnfgIdx

1.3.6.1.4.1.164.3.3.3.8.1.1.1

INTEGER

read-only

This attribute indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. Write operations can be performed only on the Temp Config.

prtT3E3CnfgTable

1.3.6.1.4.1.164.3.3.3.8.1

not-accessible

T3/E3 port configuration table.

INT prtT3E3InbandMng

1.3.6.1.4.1.164.3.3.3.8.1.1.5

INTEGER

read-write

A unique number to identify the Frame Type over the link.

INT prtT3E3LineLength

1.3.6.1.4.1.164.3.3.3.8.1.1.4

INTEGER

read-write

This object is the length of the ds3 line in feet. It provides information for line build out circuitry if it exists and can use this object to adjust the line build out. len0p450ft = 0 - 450 feet len451p900ft = 451 - 900 feet.

INT prtT3E3PrtIdx

1.3.6.1.4.1.164.3.3.3.8.1.1.2

INTEGER

read-only

This attribute indicates a unique port number. The same numbering as for prtGenPrtIdx. The valid port number depends on the IO slot no., the installed card type and the port type: outside, inside. * The external ports convention used will be (for DXC): - first two digits will be: (IO slot number+10) - last one/two digits will be the port number within the card, in odd numbers: port1 = 1 port2 = 3 port3 = 5 etc... Example: port2 of IO slot 11 will be: 213 .

INT prtT3E3Slt

1.3.6.1.4.1.164.3.3.3.8.1.1.3

INTEGER

read-only

This attribute indicates a unique number to identify the slot where the card is inserted in. When the unit is stand-alone, this object is not applicable and 255 will be used.

prtTest

1.3.6.1.4.1.164.6.2.15.4

INT prtTestCmdAndStatus

1.3.6.1.4.1.164.6.2.15.4.1.1.2

INTEGER

read-write

Setting this object to a value as detailed furter on (except 0) will initiate a test on the specific port. The test/s requested will be set according to the respective bit. The value of this object will be a sum of (2**n), where n is the Bit: TEST BIT VALUE ----------- --- ------ reserved 0 1 PayloadLoop=RLB 1 (=Remote Loopback) 2 LineLoop=DIG 2 (=Digital) 4 OtherLoop 3 8 InwardLoop=LLB 4 (=Local Loopback) 16 BERT 5 32 LC 6 64 e.g : If the requested value is 20 -> 010100 -> Bits 2 & 4 are set -> the requested tests are : LineLoopback=DIG InwardLoopback=LLB Not all tests combinations are valid. For valid test combination, see each product's specification. The terminology and order of tests (except BERT) is according to the one used for Test Status of DS1 and DS3 standards. Setting this object to stop (value=0 ; all bits are 0), will stop all the user requested tests running on the selected port. When no test is running on the port, the Get value (test status) will be 0. PayloadLoop=RLB The received signal at this interface is looped through the device. Typically the received signal is looped back for retransmission after it has passed through the device's framing function. LineLoop=DIG The received signal at this interface does not go through the device (minimum penetration) but is looped back out. OtherLoop Loopbacks that are not defined here. InwardLoop=LLB The sent signal at this interface is looped back through the device. LC This loop is applicable only for HSSI interface, towards the router .

prtTestEntry

1.3.6.1.4.1.164.6.2.15.4.1.1

not-accessible

INT prtTestIdx

1.3.6.1.4.1.164.6.2.15.4.1.1.1

INTEGER

read-only

This object is an index of the specific port or interface. For a port, the index will be as agreed between agent and application. For an interface, ifIndex may be used.

INT prtTestInitiator

1.3.6.1.4.1.164.6.2.15.4.1.1.4

INTEGER

read-only

This object indicates who initiated this port's test/s.

prtTestTable

1.3.6.1.4.1.164.6.2.15.4.1

not-accessible

This table includes test data for ports or interfaces.

prtTreCnfg

1.3.6.1.4.1.164.3.2.3.2.12

prtVc2CnfgEntry

1.3.6.1.4.1.164.3.2.3.2.5.1

not-accessible

INT prtVc2CnfgIdx

1.3.6.1.4.1.164.3.2.3.2.5.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg

prtVc2CnfgTable

1.3.6.1.4.1.164.3.2.3.2.5

not-accessible

The write operation into the Table Objects is valid only to the TmpCnfg entry.

INT prtVc2PrtIdx

1.3.6.1.4.1.164.3.2.3.2.5.1.3

INTEGER

read-only

A unique identifier of the port, within the card.

INT prtVc2SltIdx

1.3.6.1.4.1.164.3.2.3.2.5.1.2

INTEGER

read-only

This attribute indicates a unique slot position where the card is inserted. For Stand Alone products like WR: notApplicable (255)

prtVc3Cnfg

1.3.6.1.4.1.164.3.2.3.2.14

prtVcPbxCnfg

1.3.6.1.4.1.164.3.2.3.2.15

prtWanGen

1.3.6.1.4.1.164.3.1.4

rad

1.3.6.1.4.1.164

radAce

1.3.6.1.4.1.164.6.1.12.3

radAce101

1.3.6.1.4.1.164.6.1.12.3.1

radAce102

1.3.6.1.4.1.164.6.1.12.3.2

radAce2002

1.3.6.1.4.1.164.6.1.12.2.6

radAce2005

1.3.6.1.4.1.164.6.1.12.2.5

radAce20E

1.3.6.1.4.1.164.6.1.12.2.3

radAce20T

1.3.6.1.4.1.164.6.1.12.2.4

radAce2E

1.3.6.1.4.1.164.6.1.12.2.8

radAce2T

1.3.6.1.4.1.164.6.1.12.2.9

radAmcdE1

1.3.6.1.4.1.164.6.1.12.2.1

radAmcdT1

1.3.6.1.4.1.164.6.1.12.2.2

radAPD2

1.3.6.1.4.1.164.6.1.8.6

radAPD8

1.3.6.1.4.1.164.6.1.8.7

radAPS16

1.3.6.1.4.1.164.6.1.8.9

radAPS24

1.3.6.1.4.1.164.6.1.8.10

radAPS8

1.3.6.1.4.1.164.6.1.8.8

radAsmi450R1152

1.3.6.1.4.1.164.6.1.3.47

radAsmi450R1152Sa

1.3.6.1.4.1.164.6.1.3.46

radAsmi450R768

1.3.6.1.4.1.164.6.1.3.45

radAsmi450R768Sa

1.3.6.1.4.1.164.6.1.3.44

radAtmCsuDsu

1.3.6.1.4.1.164.6.1.12.2

radBridges

1.3.6.1.4.1.164.4

radConverters

1.3.6.1.4.1.164.5

radDXC10A

1.3.6.1.4.1.164.6.1.3.21

radDXC30

1.3.6.1.4.1.164.6.1.3.20

radDXC30E

1.3.6.1.4.1.164.6.1.3.23

radDXC8R

1.3.6.1.4.1.164.6.1.3.22

radEP4FL

1.3.6.1.4.1.164.6.1.9.5

radEP4T2FL

1.3.6.1.4.1.164.6.1.9.3

radEP4TAUI

1.3.6.1.4.1.164.6.1.9.2

radEP4TFL

1.3.6.1.4.1.164.6.1.9.4

radEP8T

1.3.6.1.4.1.164.6.1.9.1

radEPR4FL

1.3.6.1.4.1.164.6.1.9.11

radEPR4T2FL

1.3.6.1.4.1.164.6.1.9.9

radEPR4TAUI

1.3.6.1.4.1.164.6.1.9.8

radEPR4TFL

1.3.6.1.4.1.164.6.1.9.10

radEPR8T

1.3.6.1.4.1.164.6.1.9.7

radETS4

1.3.6.1.4.1.164.6.1.7.7

radETS4fddiDAS

1.3.6.1.4.1.164.6.1.7.3

radETS4fddiSAS

1.3.6.1.4.1.164.6.1.7.4

radFastWay100

1.3.6.1.4.1.164.6.1.4.28

radFcdE1

1.3.6.1.4.1.164.6.1.3.31

radFcdE1A

1.3.6.1.4.1.164.6.1.3.37

radFcdE1I

1.3.6.1.4.1.164.6.1.3.32

radFcdE1M

1.3.6.1.4.1.164.6.1.3.34

radFcdIP

1.3.6.1.4.1.164.6.1.3.35

radFcdT1

1.3.6.1.4.1.164.6.1.3.30

radFcdT1A

1.3.6.1.4.1.164.6.1.3.36

radFcdT1M

1.3.6.1.4.1.164.6.1.3.33

radFcdW

1.3.6.1.4.1.164.6.1.3.38

radFddi

1.3.6.1.4.1.164.2

radFDX100

1.3.6.1.4.1.164.6.1.2.1

radFEB4DAS

1.3.6.1.4.1.164.6.1.4.10

radFEB4FDX

1.3.6.1.4.1.164.6.1.4.22

radFEB4SAS

1.3.6.1.4.1.164.6.1.4.23

radFEC1

1.3.6.1.4.1.164.6.1.5.30

radFEC1UDP

1.3.6.1.4.1.164.6.1.5.33

radFEC2

1.3.6.1.4.1.164.6.1.5.32

radFEC2UDP

1.3.6.1.4.1.164.6.1.5.35

radFomiE3

1.3.6.1.4.1.164.6.1.3.72

radFomiT3

1.3.6.1.4.1.164.6.1.3.73

radFPS12

1.3.6.1.4.1.164.6.1.8.13

radFPS4

1.3.6.1.4.1.164.6.1.8.17

radFPS8

1.3.6.1.4.1.164.6.1.8.12

radFPS8c

1.3.6.1.4.1.164.6.1.8.16

radFRmon

1.3.6.1.4.1.164.6.1.3.80

radFTBDAS

1.3.6.1.4.1.164.6.1.4.26

radFTBSAS

1.3.6.1.4.1.164.6.1.4.27

radFTC1

1.3.6.1.4.1.164.6.1.5.10

radFTC1UDP

1.3.6.1.4.1.164.6.1.5.13

radFTC2

1.3.6.1.4.1.164.6.1.5.12

radFTC2UDP

1.3.6.1.4.1.164.6.1.5.15

radGen

1.3.6.1.4.1.164.6

radHcd4Sa

1.3.6.1.4.1.164.6.1.3.78

radHcdE1

1.3.6.1.4.1.164.6.1.3.52

radHcdE1Sa

1.3.6.1.4.1.164.6.1.3.51

radHtu2

1.3.6.1.4.1.164.6.1.3.43

radHtu2Sa

1.3.6.1.4.1.164.6.1.3.42

radHtuE1

1.3.6.1.4.1.164.6.1.3.41

radHtuE1Sa

1.3.6.1.4.1.164.6.1.3.40

radHtuE1SaV2

1.3.6.1.4.1.164.6.1.3.70

radHtuE1V2

1.3.6.1.4.1.164.6.1.3.71

radHtuT1

1.3.6.1.4.1.164.6.1.3.54

radHtuT1Sa

1.3.6.1.4.1.164.6.1.3.53

radImx2

1.3.6.1.4.1.164.6.1.3.62

radImx2T1E1

1.3.6.1.4.1.164.6.1.3.65

radImx4E1

1.3.6.1.4.1.164.6.1.3.64

radImx4T1

1.3.6.1.4.1.164.6.1.3.63

radImx64

1.3.6.1.4.1.164.6.1.3.60

radImx6L

1.3.6.1.4.1.164.6.1.3.61

radKM2100

1.3.6.1.4.1.164.6.1.3.15

radKM2104

1.3.6.1.4.1.164.6.1.3.16

radLrs12B

1.3.6.1.4.1.164.6.1.3.49

radLrs12F

1.3.6.1.4.1.164.6.1.3.48

radMBE1

1.3.6.1.4.1.164.6.1.4.5

radMBE1D

1.3.6.1.4.1.164.6.1.4.6

radMBE8

1.3.6.1.4.1.164.6.1.4.7

radMBE8D

1.3.6.1.4.1.164.6.1.4.8

radMBERAS

1.3.6.1.4.1.164.6.1.4.20

radMBERASa

1.3.6.1.4.1.164.6.1.4.21

radMLBT

1.3.6.1.4.1.164.6.1.4.9

radMP2100

1.3.6.1.4.1.164.6.1.3.1

radMP2100B

1.3.6.1.4.1.164.6.1.3.3

radMP2100F

1.3.6.1.4.1.164.6.1.3.4

radMP2100H

1.3.6.1.4.1.164.6.1.3.5

radMP2104

1.3.6.1.4.1.164.6.1.3.2

radMP2104H

1.3.6.1.4.1.164.6.1.3.6

radMP2200B

1.3.6.1.4.1.164.6.1.3.7

radMP2200F

1.3.6.1.4.1.164.6.1.3.8

radMX30

1.3.6.1.4.1.164.6.1.3.11

radMX300

1.3.6.1.4.1.164.6.1.3.12

radMX3000

1.3.6.1.4.1.164.6.1.3.9

radMX3004

1.3.6.1.4.1.164.6.1.3.10

radOpt4E1C

1.3.6.1.4.1.164.6.1.3.74

radOpt4T1C

1.3.6.1.4.1.164.6.1.3.75

radOptimux4E1

1.3.6.1.4.1.164.6.1.3.55

radOptimux4T1

1.3.6.1.4.1.164.6.1.3.56

radOptimuxXL16E1

1.3.6.1.4.1.164.6.1.3.59

radOptimuxXLE1

1.3.6.1.4.1.164.6.1.3.57

radOptimuxXLT1

1.3.6.1.4.1.164.6.1.3.58

radPrbiE3

1.3.6.1.4.1.164.6.1.3.76

radPrbiT3

1.3.6.1.4.1.164.6.1.3.77

radRADring

1.3.6.1.4.1.164.6.1.1.1

radRBHE

1.3.6.1.4.1.164.6.1.7.1

radRBHT

1.3.6.1.4.1.164.6.1.7.2

radRingMonitor

1.3.6.1.4.1.164.6.1.1.3

radRRFTBDAS

1.3.6.1.4.1.164.6.1.4.24

radRRFTBSAS

1.3.6.1.4.1.164.6.1.4.25

radRRMLBT

1.3.6.1.4.1.164.6.1.4.15

radRRMLBTF

1.3.6.1.4.1.164.6.1.4.16

radRRTRE1D

1.3.6.1.4.1.164.6.1.4.17

radRRTRE8

1.3.6.1.4.1.164.6.1.4.13

radRRTRE8D

1.3.6.1.4.1.164.6.1.4.14

radRTEC

1.3.6.1.4.1.164.6.1.11.3

radRTED

1.3.6.1.4.1.164.6.1.11.1

radRTEM

1.3.6.1.4.1.164.6.1.11.2

radSAH16Eext

1.3.6.1.4.1.164.6.1.7.12

radSAH16Eint

1.3.6.1.4.1.164.6.1.7.10

radSAH16Text

1.3.6.1.4.1.164.6.1.7.13

radSAH16Tint

1.3.6.1.4.1.164.6.1.7.11

radSAHEMU

1.3.6.1.4.1.164.6.1.7.8

radSAHEMX

1.3.6.1.4.1.164.6.1.7.5

radSAHTM

1.3.6.1.4.1.164.6.1.7.6

radSEC1

1.3.6.1.4.1.164.6.1.5.20

radSEC1UDP

1.3.6.1.4.1.164.6.1.5.23

radSEC2

1.3.6.1.4.1.164.6.1.5.22

radSEC2UDP

1.3.6.1.4.1.164.6.1.5.25

radSPS12

1.3.6.1.4.1.164.6.1.8.5

radSPS2

1.3.6.1.4.1.164.6.1.8.1

radSPS3

1.3.6.1.4.1.164.6.1.8.2

radSPS3S

1.3.6.1.4.1.164.6.1.8.11

radSPS3Sc2S

1.3.6.1.4.1.164.6.1.8.15

radSPS3ScSL

1.3.6.1.4.1.164.6.1.8.14

radSPS6

1.3.6.1.4.1.164.6.1.8.3

radSPS9

1.3.6.1.4.1.164.6.1.8.4

radStarSwitch

1.3.6.1.4.1.164.6.1.12.1

radStarSwitchATM155

1.3.6.1.4.1.164.6.1.12.1.3

radStarSwitchATM25

1.3.6.1.4.1.164.6.1.12.1.1

radStarSwitchATM25L

1.3.6.1.4.1.164.6.1.12.1.2

radSTC1

1.3.6.1.4.1.164.6.1.5.1

radSTC1UDP

1.3.6.1.4.1.164.6.1.5.4

radSTC2

1.3.6.1.4.1.164.6.1.5.3

radSTC2UDP

1.3.6.1.4.1.164.6.1.5.6

radStkHub

1.3.6.1.4.1.164.7

radSysAtm

1.3.6.1.4.1.164.6.1.12

radSysBRG

1.3.6.1.4.1.164.6.1.4

radSysCnvrtr

1.3.6.1.4.1.164.6.1.5

radSysEth

1.3.6.1.4.1.164.6.1.9

radSysFddi

1.3.6.1.4.1.164.6.1.2

radSysPS

1.3.6.1.4.1.164.6.1.8

radSysRtr

1.3.6.1.4.1.164.6.1.11

radSysStkHub

1.3.6.1.4.1.164.6.1.7

radSysTR

1.3.6.1.4.1.164.6.1.1

radSysWan

1.3.6.1.4.1.164.6.1.3

radTinyRouter

1.3.6.1.4.1.164.6.1.11.5

radTMA

1.3.6.1.4.1.164.6.1.1.2

radTokenRing

1.3.6.1.4.1.164.1

radTRE1

1.3.6.1.4.1.164.6.1.4.1

radTRE1D

1.3.6.1.4.1.164.6.1.4.2

radTRE8

1.3.6.1.4.1.164.6.1.4.3

radTRE8D

1.3.6.1.4.1.164.6.1.4.4

radTRERAS

1.3.6.1.4.1.164.6.1.4.18

radTRERASa

1.3.6.1.4.1.164.6.1.4.19

radTrimBrg10

1.3.6.1.4.1.164.6.1.4.11

radTrimBrg16

1.3.6.1.4.1.164.6.1.4.12

radVOIP

1.3.6.1.4.1.164.6.1.3.13

radWan

1.3.6.1.4.1.164.3

radWebRanger

1.3.6.1.4.1.164.6.1.11.4

NTF sanityCheckTrap

1.3.6.1.4.1.164.3.3.0.1

This trap is sent after a data base download attempt. It returns the sanity result status and the configuration no.checked.

NTF sanityTrap

1.3.6.1.4.1.164.3.2.0.2

This trap is sent after a data base update. It returns the sanity result status and the configuration no. checked. If the result is of Flip DB Sanity Check, the configuration no. sent will be 0. If the result is of Variant Sanity Check, the configuration no. sent will be 100.

statAgnGen

1.3.6.1.4.1.164.3.1.2.1

statisPrtGen

1.3.6.1.4.1.164.3.1.4.1.3

statMdlGen

1.3.6.1.4.1.164.3.1.3.1

statPrtGen

1.3.6.1.4.1.164.3.1.4.1

statPrtMux

1.3.6.1.4.1.164.3.2.3.1

NTF statusChangedTrap

1.3.6.1.4.1.164.3.2.0.5

This trap is sent upon any change of the LEDs status.

NTF sysAlrStatusTrap

1.3.6.1.4.1.164.3.3.0.4

This trap is sent upon any change in the value of any of the variables.

sysBufferAlr

1.3.6.1.4.1.164.3.3.1.5

INT sysBufferAlrClearCmd

1.3.6.1.4.1.164.3.3.1.5.2

INTEGER

read-write

Setting this attribute to ON, will enforce a clear operation on the Alarms Buffer. Upon completion, the value will automatically change to off(2).

INT sysBufferAlrCode

1.3.6.1.4.1.164.3.3.1.5.1.1.2

INTEGER

read-only

This object indicates a code related to a specific alarm description. The list of codes and thir related descriptions will be known by the NMS (for display purpose) and will appear in the unit's user manual.

STR sysBufferAlrDate

1.3.6.1.4.1.164.3.3.1.5.1.1.6

DisplayString

read-only

The date when the alarm occured. The format will be according to sysSDateFormat.

sysBufferAlrEntry

1.3.6.1.4.1.164.3.3.1.5.1.1

not-accessible

INT sysBufferAlrIdx

1.3.6.1.4.1.164.3.3.1.5.1.1.1

INTEGER

read-only

An index number of the current alarms.

INT sysBufferAlrPort

1.3.6.1.4.1.164.3.3.1.5.1.1.5

INTEGER

read-only

The port number this alarm refers to. If the port number is irrelevant to this alarm (if it is a system/card level alarm) the value will be 9999.

INT sysBufferAlrSlot

1.3.6.1.4.1.164.3.3.1.5.1.1.4

INTEGER

read-only

The slot number this alarm refers to. When the alarm refers to a system function OR the DACS agent is a stand-alone unit, the value will be 'notApplicable(255)'.

INT sysBufferAlrState

1.3.6.1.4.1.164.3.3.1.5.1.1.3

INTEGER

read-only

This object indicates the alarm type. minor/major - indicates appearance of the problem and the type. event - indicates occurence of an event. off - indicates disappearance of a minor/major type alarm.

sysBufferAlrTable

1.3.6.1.4.1.164.3.3.1.5.1

not-accessible

List of current existing alarms (of all levels).

STR sysBufferAlrTime

1.3.6.1.4.1.164.3.3.1.5.1.1.7

DisplayString

read-only

The time when the alarm occured.

INT sysCClkCnfgIdx

1.3.6.1.4.1.164.3.3.1.6.1.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg.

sysCClkSrcEntry

1.3.6.1.4.1.164.3.3.1.6.1.1

not-accessible

INT sysCClkSrcIdx

1.3.6.1.4.1.164.3.3.1.6.1.1.2

INTEGER

read-only

An index in the table. There are only two entries in the table. master - refers Master clock parameters fallback - refers Fallback clock parameters

INT sysCClkSrcMode

1.3.6.1.4.1.164.3.3.1.6.1.1.3

INTEGER

read-write

This entry indicates the source the nodal timing is locked to. none - is an invalid option for Master clock. internal - is an invalid option for Fallback clock . station - is an invalid option for a stand-alone unit. lbt - loop-back timing notApplicable - for ML source of Kmux or ML Timing combinations when Master/Fallback clock are not applicable.

INT sysCClkSrcPrt

1.3.6.1.4.1.164.3.3.1.6.1.1.4

INTEGER

read-write

This entry is valid only when working in rxClk mode. For invalid entry the return value will be 9999. The valid port number depends on the IO slot no., the installed card type and the port type: outside, inside, SP. * The SP ports will be numbered as follows: - SP port 1 : 1 - SP port 2 : 2 For external ports the convention used will be (for DXC): - first two digits will be: (IO slot number+10) - last one/two digits will be the port number within the card, in odd numbers: port1 = 1 port2 = 3 port3 = 5 etc... Example: port2 of IO slot 11 will be: 213 . For internal ports the convention used will be (for DXC): - first two digits will be: (IO slot number+10) - last one/two digits will be the port number within the card, in even numbers: port1 = 2 port2 = 4 port3 = 6 etc... Example: port2 of IO slot 11 will be: 214 . For Kmux, the port will be according to : Slot*100+Ch.

sysCClkSrcTable

1.3.6.1.4.1.164.3.3.1.6.1

not-accessible

All the entries of this table are identical (have the same value) for all the configurations (1..255) except the TmpCnfg. The write operation into the Table Objects is valid only for the TmpCnfg entry.

INT sysCClkStationFreq

1.3.6.1.4.1.164.3.3.1.6.1.1.5

INTEGER

read-write

This entry indicates the frequency of the station clock when the source is 'station'. The value will be applicable only when the sysCClkSrcMode is 'station'.

sysChas

1.3.6.1.4.1.164.3.3.1.2.1

INT sysCIsdnFormat

1.3.6.1.4.1.164.3.3.1.6.2.1.3

INTEGER

read-write

ISDN format. This parameter controls the operation mode of the ISDN ports. te - ISDN timing is derived from the signal received from the equipment it is connected to. nt - timing of the transmit path is locked to the nodal timing source. notApplicable - for agents that do not support this feature.

INT sysCMatrixMode

1.3.6.1.4.1.164.3.3.1.6.2.1.2

INTEGER

read-write

Indicates the TS Matrix Mode: bidirectional - TS Assignment Matrix is symmetric. unidirectional - TS Assignment Matrix can be asymmetric. notApplicable - for agents that do not support this feature.

sysCnfgEntry

1.3.6.1.4.1.164.3.3.1.6.2.1

not-accessible

INT sysCnfgIdx

1.3.6.1.4.1.164.3.3.1.6.2.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg.

sysCnfgTable

1.3.6.1.4.1.164.3.3.1.6.2

not-accessible

All the entries of this table are identical (have the same value) for all the configurations (1..255) except the TmpCnfg. The write operation into the Table Objects is valid only for the TmpCnfg entry.

sysConfig

1.3.6.1.4.1.164.3.3.1.6

INT sysCRdnCnfgIdx

1.3.6.1.4.1.164.3.3.1.6.3.1.1

INTEGER

read-only

This object indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg.

sysCRdnEntry

1.3.6.1.4.1.164.3.3.1.6.3.1

not-accessible

INT sysCRdnHwSwFlip

1.3.6.1.4.1.164.3.3.1.6.3.1.9

INTEGER

read-write

HW or SW decision for Redundancy Flip. This object is applicable only for sysCRdnMode=singleSlotProtection. HW - decision is by I/O card SW - decision is by CL SW.

INT sysCRdnMode

1.3.6.1.4.1.164.3.3.1.6.3.1.6

INTEGER

read-write

Redundancy Mode. DXC supports: yCable(3), singleSlotProtection(6) and dualCableParallelTx(4) MP supports: dualCableAIS(2), yCable(3), dualCableParallelTx(4) and backup(5). backup - will be used when a port is backup of more than one port.

INT sysCRdnOnline

1.3.6.1.4.1.164.3.3.1.6.3.1.11

INTEGER

read-only

Status - who is the Online (current) Redundancy Slot/Port. This object shows only the Online Slot/Port regarding the Redundancy. mdlSActivity or prtGenActiveStatus of the same Slot/Port may be Offline.

INT sysCRdnPrimePort

1.3.6.1.4.1.164.3.3.1.6.3.1.3

INTEGER

read-only

The port number. For DXC: For external ports the convention used will be: - first two digits will be: (IO slot number+10) - last one/two digits will be the port number within the card, in odd numbers: port1 = 1 port2 = 3 port3 = 5 etc... Example: port2 of IO slot 11 will be: 213 . For internal ports the convention used will be: - first two digits will be: (IO slot number+10) - last one/two digits will be the port number within the card, in even numbers: port1 = 2 port2 = 4 port3 = 6 etc... Example: port2 of IO slot 11 will be: 214 . For MP: For external ports, the value will be as that of the port in the card. Example: external-3 -> 3 external-4 -> 4 For internal ports, the value will be 100 + the port in the card. Example: internal-1 -> 101 internal-4 -> 104 100=notApplicable (when Redundancy is at card level).

INT sysCRdnPrimeSlot

1.3.6.1.4.1.164.3.3.1.6.3.1.2

INTEGER

read-only

The slot number of the Primary card of Redundancy. The Primary card should be the card that user wishes to be the online card (usually the more important one). For some Redundancy modes the importance of the redundant cards/ports is the same.

INT sysCRdnRecMode

1.3.6.1.4.1.164.3.3.1.6.3.1.7

INTEGER

read-write

Recovery Mode. This object determines if after recovery of the failed card/port it will become on-line again or not: auto - automatic . In this case, the failed card/port will become on-line again after recovery, automatically. manual - In this case, the failed card/port will not become on-line again after recovery.

INT sysCRdnRecTime

1.3.6.1.4.1.164.3.3.1.6.3.1.8

INTEGER

read-write

Redundancy Recovery Time (sec). After switching to the current online card, the next switch can be performed only after a minimum time, indicated by this object. This object is applicable only when sysCRdnRecMode=auto.

INT sysCRdnRowStatus

1.3.6.1.4.1.164.3.3.1.6.3.1.10

INTEGER

read-write

This parameter allows NMS to create/delete entries of this table.

INT sysCRdnSecPort

1.3.6.1.4.1.164.3.3.1.6.3.1.5

INTEGER

read-write

The port number. For DXC: For external ports the convention used will be: - first two digits will be: (IO slot number+10) - last one/two digits will be the port number within the card, in odd numbers: port1 = 1 port2 = 3 port3 = 5 etc... Example: port2 of IO slot 11 will be: 213 . For internal ports the convention used will be: - first two digits will be: (IO slot number+10) - last one/two digits will be the port number within the card, in even numbers: port1 = 2 port2 = 4 port3 = 6 etc... Example: port2 of IO slot 11 will be: 214 . For MP: For external ports, the value will be as that of the port in the card. Example: external-3 -> 3 external-4 -> 4 For internal ports, the value will be 100 + the port in the card. Example: internal-1 -> 101 internal-4 -> 104 100=notApplicable (when Redundancy is at card level).

INT sysCRdnSecSlot

1.3.6.1.4.1.164.3.3.1.6.3.1.4

INTEGER

read-write

The slot number of the Secondary card of Redundancy matching the Primary slot.

sysCRdnTable

1.3.6.1.4.1.164.3.3.1.6.3

not-accessible

Configuration of all Redundant I/O cards and ports. The write operation into the table objects is valid only for the TmpCnfg. A Slot/Port that have no Redundancy, will not exist in this table.

INT sysCRoutingOnEth

1.3.6.1.4.1.164.3.3.1.6.2.1.4

INTEGER

read-write

Mng Routing Protocol on the online CL Ethernet port.

sysCurrentAlr

1.3.6.1.4.1.164.3.3.1.4

sysDbase

1.3.6.1.4.1.164.3.3.1.7

INT sysDbaseDownloadCnfgIdxCmd

1.3.6.1.4.1.164.3.3.1.7.2

INTEGER

read-write

This attribute specifies the Id of the target RealCnfg to which the TmpCnfg should be transferred. Upon set command, the DACS agent will initiate the Sanity-Check process. If successful, the actual transfer will be performed. If there will be errors, the user will have to perform the command again after errors correction. The operation is valid only on configuration numbers that do not exceed sysSMaxNoOfCnfg.

INT sysDbaseFlipActivation

1.3.6.1.4.1.164.3.3.1.7.4.1.3

INTEGER

read-write

This attribute indicates if the Dbase flip will be activated at the time specified for this configuration (enable) or not (disable). No more than one flip should be enabled for the same time.

sysDbaseFlipEntry

1.3.6.1.4.1.164.3.3.1.7.4.1

not-accessible

INT sysDbaseFlipIdx

1.3.6.1.4.1.164.3.3.1.7.4.1.1

INTEGER

read-only

This attribute indicates the Idx of the Cnfg being the target Configuration.

sysDbaseFlipTable

1.3.6.1.4.1.164.3.3.1.7.4

not-accessible

Dbase Flip time and activation for every configuration.

STR sysDbaseFlipTime

1.3.6.1.4.1.164.3.3.1.7.4.1.2

DisplayString

read-write

This attribute indicates the time (HH:MM) when this data base will start being used by the Tmp config.

INT sysDbaseSanityCheckCmd

1.3.6.1.4.1.164.3.3.1.7.1

INTEGER

read-write

Setting this attribute to on(3) will initiate the process of Sanity check on the TmpCnfg. Upon completion, the value will automatically change to off(2).

INT sysDbaseUploadCnfgIdxCmd

1.3.6.1.4.1.164.3.3.1.7.3

INTEGER

read-write

This attribute specifies the Id of the source Cnfg to be loaded into the TmpCnfg. Upon set operation the actual transfer will be initiated. The operation is valid only on configuration numbers that do not exceed sysSMaxNoOfCnfg.

sysDcl

1.3.6.1.4.1.164.3.3.1.2.2

INT sysDclActiveCl

1.3.6.1.4.1.164.3.3.1.2.2.1.1.3

INTEGER

read-write

Active desired DCL. When 'auto' is selected, the system automatically selects the active DCL.

INT sysDclCnfgIdx

1.3.6.1.4.1.164.3.3.1.2.2.1.1.1

INTEGER

read-only

This object indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg. This object is identical for all the configurations (1..255). Only the TmpCnf(255) might have a different value.

INT sysDclCopyDbCmd

1.3.6.1.4.1.164.3.3.1.2.2.3.1.2

INTEGER

read-write

When this command is sent to the agent, on(3), the Database specified (Db Idx), will be copied from the Offline Dcl to the Online Dcl. Afterwards the value of this object will automatically change to off(2).

sysDclCopyDbEntry

1.3.6.1.4.1.164.3.3.1.2.2.3.1

not-accessible

INT sysDclCopyDbIdx

1.3.6.1.4.1.164.3.3.1.2.2.3.1.1

INTEGER

read-only

This object indicates the Idx of the Cnfg(1..255) being accessed.

sysDclCopyDbTable

1.3.6.1.4.1.164.3.3.1.2.2.3

not-accessible

This table enables to copy a cofiguration from the Offline Dcl to the Online Dcl.

sysDclEntry

1.3.6.1.4.1.164.3.3.1.2.2.1.1

not-accessible

INT sysDclFlipDelay

1.3.6.1.4.1.164.3.3.1.2.2.1.1.4

INTEGER

read-write

If one DCL flip occured and a second one should be performed, the time from the previous flip is checked. If the time is shorter than the delay specified here (in minutes), the system should delay the flip operation until time reaches the specified delay.

INT sysDclOnline

1.3.6.1.4.1.164.3.3.1.2.2.2

INTEGER

read-only

The active Dcl card of the agent.

INT sysDclRedundancy

1.3.6.1.4.1.164.3.3.1.2.2.1.1.2

INTEGER

read-write

DCL redundancy desired state.

sysDclTable

1.3.6.1.4.1.164.3.3.1.2.2.1

not-accessible

All the entries of this table are identical (have the same value) for all the configurations (1..255) except the TmpCnfg. The write operation into the Table Objects is valid only for the TmpCnfg entry.

sysHub

1.3.6.1.4.1.164.3.3.1.2

sysSa

1.3.6.1.4.1.164.3.3.1.1

INT sysSActiveCnfg

1.3.6.1.4.1.164.3.3.1.3.4

INTEGER

read-only

This object specifies the configuration number, that is currently active and running.

STR sysSaHwVersion

1.3.6.1.4.1.164.3.3.1.1.3

DisplayString

read-only

This object indicates the Hardware version of the system.

INT sysSAlarmInvert

1.3.6.1.4.1.164.3.3.1.4.1.1.5

INTEGER

read-only

Alarm Invert is : on/off.

INT sysSAlarmMask

1.3.6.1.4.1.164.3.3.1.4.1.1.4

INTEGER

read-only

Alarm Mask is : on/off.

INT sysSAlrClearAllCmd

1.3.6.1.4.1.164.3.3.1.4.3

INTEGER

read-write

Setting this attribute to ON, will enforce a clear operation on all levels alarms . Upon completion, the value will automatically change to off(2).

INT sysSAlrClearCmd

1.3.6.1.4.1.164.3.3.1.4.2

INTEGER

read-write

Setting this attribute to ON, will enforce a clear operation on the system level alarms . Upon completion, the value will automatically change to off(2).

INT sysSAlrCode

1.3.6.1.4.1.164.3.3.1.4.1.1.2

INTEGER

read-only

This object indicates a code related to a specific alarm description. The list of codes and their related descriptions will be sent to NMS request (for display purpose) by alrGenTable.

INT sysSAlrDataUpdateCmd

1.3.6.1.4.1.164.3.3.1.4.6

INTEGER

read-write

on(3) - will cause Update of the Alarms Severity, Attributes and Report tables. off(2) - Upon completion, the value will automatically change to off(2).

sysSAlrEntry

1.3.6.1.4.1.164.3.3.1.4.1.1

not-accessible

INT sysSAlrIdx

1.3.6.1.4.1.164.3.3.1.4.1.1.1

INTEGER

read-only

An index number of the current system alarms.

OCT sysSAlrMask

1.3.6.1.4.1.164.3.3.1.4.5

OCTET STRING

read-write

This object is a mask that indicates which system level alarms are masked. The masked alarms (their bit is set to '1') are neither sent to the manager, nor taken into account for alarm status and LEDs. Bit no. = Alarm code The bits that do not belong to the system level will be 0. This object is applicable only when sysSAlrMaskAll=off (otherwise all system alarms are masked). Example: When Alarms having the codes 6 and 11 are masked, the value of this object will be 840 (hex).

INT sysSAlrMaskAll

1.3.6.1.4.1.164.3.3.1.4.4

INTEGER

read-write

on(3) - will cause masking of all the system level alarms. These alarms will not be sent to NMS and will not be taken into account for Alarms Status. off(2) - will unmask all system level alarms except those masked via the sysSAlrMask.

INT sysSAlrState

1.3.6.1.4.1.164.3.3.1.4.1.1.3

INTEGER

read-only

This object indicates the alarm state.

INT sysSAlrStatus

1.3.6.1.4.1.164.3.3.1.3.8

INTEGER

read-only

Indicates the current alarm state only for system level. This object will be set to: - major (3): when there is at least one active (ON) major alarm . - minor (4): when there is no active major alarm, but there is at least one active minor alarm. - off(2): when there is no active (ON) major or minor alarms (since last clear operation).

INT sysSAlrStatusAll

1.3.6.1.4.1.164.3.3.1.3.9

INTEGER

read-only

Indicates the current alarm state including all levels: system, card, port. This object will be set to: - major (3): when there is at least one active (ON) major alarm . - minor (4): when there is no active major alarm, but there is at least one active minor alarm. - off(2): when there is no active (ON) major or minor alarms (since last clear operation).

sysSAlrTable

1.3.6.1.4.1.164.3.3.1.4.1

not-accessible

List of system level current existing alarms .

INT sysSaPorts

1.3.6.1.4.1.164.3.3.1.1.4

INTEGER

read-only

This object indicates the ports that are present in the system. Each possible port is represented by a bit. The value of this object is a sum of 2**n, n=number of bits. '1' - means that the port exists '0' - means that the port does not exist For detailed bit assignment, see product's spec. Bit 0 = LSB When this object is not relevant, the value will be 0. In some cases, this object may represent ports configuration of the system AND its far-end unit.

INT sysSaReadSwch

1.3.6.1.4.1.164.3.3.1.1.5

INTEGER

read-write

This object indicates wether the configuration will be read from the DIP switches on the SA (stand alone) unit. Each switch is represented by a bit. If the bit is 1: the configuration will be read from the HW switch position. If the bit is 0: the configuration will be read from the SW user configuration. The DIP switches are different in each of the RAD devices. In the Tiny Router (starting from the LSB) the following switches exist: Bit 0: WAN Loop Bit 1: LAN Full Duplex (When LAN AUI connector, it is SQE) Bit 2: PPP (When WAN 4 Wire connector, it is LONG) Bit 3: IP Learn

INT sysSaSwchStatus

1.3.6.1.4.1.164.3.3.1.1.1

INTEGER

read-only

This object indicates the status of the switches on the SA unit. Each switch is represented by a bit. The status is a sum of 2**n, according to the bits. For SMODs products see modem's specification. For DXC product see the following: There are 4 switches: bit 0 SP-PAR (LSB) '1' - Default parameters bit 1 PSWRD '1' - Password=default '0' - Password=user selected bit 2 DB-INIT '1' - DB initiated with default '0' - DB initiated with NVRAM contents bit 3 PC-SP (MSB) '1' - Management by terminal only '0' - Management by NMS Example: If SP-PAR and PSWRD bits are set ('1'), the value will be 3 (2**1 + 2**0). When the status of the switches is unknown, the value of this object will be 255.

STR sysSaSwRevision

1.3.6.1.4.1.164.3.3.1.1.2

DisplayString

read-only

This object indicates the Software revision of the system.

INT sysSClkSrc

1.3.6.1.4.1.164.3.3.1.3.7

INTEGER

read-only

This entry indicates the source of the system clock.

STR sysSDateCmd

1.3.6.1.4.1.164.3.3.1.3.2

DisplayString

read-write

This object indicates the current date as it is known by the agent using its own real-time clock. The format would be as specified by the sysSDateFormat. This parameter can be set for time synchronization between the NMS and the Agent. * For KM-2100 V1 and FCD-T1/E1 - the string should contain '/' signs between day, month and year. Example: 12/08/1998. * For DXC and rest of the products - the string should contain '-' signs between day, month and year. Example: 12-08-1998. The day value will be in the range: 1..31. The month value will be in the range: 1..12. The year value will be in the range: 1996..2050 for products supporting the '-' format.

INT sysSDateFormat

1.3.6.1.4.1.164.3.3.1.3.1

INTEGER

read-write

This object indicates the date and time format used for the sysSDateAndTimeCmd and for the alarm buffer report. KM-2100 V1 and FCD-T1/E1 do not support the 'yyyyMMDD' format.

INT sysSEditBy

1.3.6.1.4.1.164.3.3.1.3.6

INTEGER

read-only

This entry indicates which MMI application is working on the edited config. The editing phase starts at the first modify operation and ends after a load operation.

INT sysSEditCnfg

1.3.6.1.4.1.164.3.3.1.3.5

INTEGER

read-only

This object indicates the unique configuration number that is currently loaded into the tmp working space for manipulation and update operations. Value of 255 means no config. is under editing process.

STR sysSErrDescription

1.3.6.1.4.1.164.3.3.1.3.13.1.3

DisplayString

read-only

This object is a full text description of the sanity check error including error code, IO slot and port numbers related to the code .

INT sysSErrIdx

1.3.6.1.4.1.164.3.3.1.3.13.1.2

INTEGER

read-only

Unique index number to identify an entry in the error or warning list . The maximum value cannot exceed the value of 'sysSNoOfSanityCheckErr' (actually, the sum of the Errors list max. index and the Warning list max. index should equal the value of'sysSNoOfSanityCheckErr').

sysSErrListEntry

1.3.6.1.4.1.164.3.3.1.3.13.1

not-accessible

sysSErrListTable

1.3.6.1.4.1.164.3.3.1.3.13

not-accessible

INT sysSErrType

1.3.6.1.4.1.164.3.3.1.3.13.1.1

INTEGER

read-only

The errors are recorded in the agent, in two separate lists, according to their type: error or warning.

INT sysSInvertedAlr

1.3.6.1.4.1.164.3.3.1.3.17

INTEGER

read-only

Indicates if there is any Inverted alarm at any level of the system (sys, card, port). notApplicable - for agents that do not support this object.

INT sysSMaxNoOfCnfg

1.3.6.1.4.1.164.3.3.1.3.14

INTEGER

read-only

Maximum number of configurations that can be defined and stored in the DACS agent. If the DACS agent has a large capacity, the maximum will be limited to 254.

INT sysSNoOfSanityCheckErr

1.3.6.1.4.1.164.3.3.1.3.12

INTEGER

read-only

This object indicates the number of errors/warnings discovered by the last Sanity Check process.

STR sysSRdnFlipCause

1.3.6.1.4.1.164.3.3.1.3.18.1.4

DisplayString

read-only

The last cause that caused the Flip from the Slot (Port) of sysSRdnSlot, sysSRdnPort.

OID sysSRdnFlipCmd

1.3.6.1.4.1.164.3.3.1.3.20

OBJECT IDENTIFIER

read-write

This object enables the user to send a command to the Agent, to Flip from a current Online IO card to its Redundant card. The value sent will be an Object Identifier of an entry in the sysCRdnTable. This entry defines the Redundant couple of Slots on which the Flip is applied. Setting this object, will cause the Agent to Flip from current Online card to its Redundant card. This manual flip command is applicable only for entries having Redundancy Mode=Y Cable. Agent will send the value 0 for Get.

STR sysSRdnFlipDate

1.3.6.1.4.1.164.3.3.1.3.18.1.5

DisplayString

read-only

Flip event Date. The format will be the one selected by user for sysSDateFormat.

sysSRdnFlipEntry

1.3.6.1.4.1.164.3.3.1.3.18.1

not-accessible

INT sysSRdnFlipIdx

1.3.6.1.4.1.164.3.3.1.3.18.1.1

INTEGER

read-only

Unique index number to identify an entry in the Redundancy Flip list.

INT sysSRdnFlipPort

1.3.6.1.4.1.164.3.3.1.3.18.1.3

INTEGER

read-only

The port number from which Flip was performed. For DXC: For external ports the convention used will be: - first two digits will be: (IO slot number+10) - last one/two digits will be the port number within the card, in odd numbers: port1 = 1 port2 = 3 port3 = 5 etc... Example: port2 of IO slot 11 will be: 213 . For internal ports the convention used will be: - first two digits will be: (IO slot number+10) - last one/two digits will be the port number within the card, in even numbers: port1 = 2 port2 = 4 port3 = 6 etc... Example: port2 of IO slot 11 will be: 214 . For MP: For external ports, the value will be as that of the port in the card. Example: external-3 -> 3 external-4 -> 4 For internal ports, the value will be 100 + the port in the card. Example: internal-1 -> 101 internal-4 -> 104 100=notApplicable (when Redundancy is at card level).

INT sysSRdnFlipSlot

1.3.6.1.4.1.164.3.3.1.3.18.1.2

INTEGER

read-only

The slot number from which Flip was performed.

sysSRdnFlipTable

1.3.6.1.4.1.164.3.3.1.3.18

not-accessible

This table includes all the Flip events due to I/O Redundancy since last Clear command of this table.

INT sysSRdnFlipTableClearCmd

1.3.6.1.4.1.164.3.3.1.3.19

INTEGER

read-write

This command, when Set to 'on', clears the Redundancy Flip table (sysSRdnFlipTable). After clear is performed, the agent will turn the value to 'off' automatically.

STR sysSRdnFlipTime

1.3.6.1.4.1.164.3.3.1.3.18.1.6

DisplayString

read-only

Flip event Time. The format will be hh:mm:ss.

INT sysSRelayState

1.3.6.1.4.1.164.3.3.1.3.16

INTEGER

read-only

Indicates the current state of the alarm relay. notApplicable - for agents that do not support this object.

INT sysSSanityCheckStatus

1.3.6.1.4.1.164.3.3.1.3.11

INTEGER

read-only

Upon completion of the Sanity Check process on the TmpCnfg this object will be set to: - fail(2): when there is at least one error (which is not just a warning) encountered otherwise, - warning(3): when there are only warnings otherwise, - ok(4). The value should be unknown(1), if the TmpCnfg was changed after the last Sanity check.

INT sysSSelfTestResult

1.3.6.1.4.1.164.3.3.1.3.15

INTEGER

read-only

The test is performed by the active Common Logic card. The result will be a sum of 2**n according to the following bit convention: For DXC: bit 0 Database 1 Checksum Error (LSB) bit 1 Database 2 Checksum Error bit 2 I/O Expander Error bit 3 Counter Error bit 4 Matrix DPR Error bit 5 PS-A 5 Volt Error bit 6 PS-A 12 Volt Error bit 7 PS-B 5 Volt Error bit 8 PS-B 12 Volt Error bit 9 EPROM Failure For FCD: bit 0 I/O Expander Error (LSB) bit 1 Counter Error bit 2 EPROM Failure bit 3 Illegal Sys Config bit 4 SFIFO bit 5 EPIC Failure (ISDN) When a bit is ('1'), the error exists. When NO ERROR is encountered, this object's value will be 0.

sysStatus

1.3.6.1.4.1.164.3.3.1.3

NTF sysStatusChangedTrap

1.3.6.1.4.1.164.3.3.0.5

This trap is sent when Leds status is changed.

INT sysSTestStatus

1.3.6.1.4.1.164.3.3.1.3.10

INTEGER

read-only

Indicates the current test status (for all levels: system, card, port). This attribute will be set to: - on(3): when there is at least one test in progress on the system/card/port otherwise the value will be off(2).

STR sysSTimeCmd

1.3.6.1.4.1.164.3.3.1.3.3

DisplayString

read-write

This object indicates the current time as it is known by the agent using its own real-time clock. This parameter can be set for time synchronization between the NMS and the Agent. The string should contain ':' signs between hour, minute and second. Example: 11:05:58.

INT systemClearTablesCmd

1.3.6.1.4.1.164.6.2.17

INTEGER

read-write

tempCnfgTables - Set *RowStatus = destroy for all entries of some tables having *RowStatus object, for temporary configuration only! (255). For the relevant tables, see product's specification. This object should be used by WAN product applications before performing the Update operation, in order to clear old entries of these tables. off - agent will automatically change to this value, after performing the command.

systemDacsMux

1.3.6.1.4.1.164.3.3.1

STR systemDate

1.3.6.1.4.1.164.6.2.14.1

DisplayString

read-write

System date.

IP systemDefaultGateway

1.3.6.1.4.1.164.6.2.24

IpAddress

read-write

Default Gateway's IP Address.

INT systemParameter

1.3.6.1.4.1.164.6.2.18

INTEGER

read-write

This parameter can be used for different purposes: - TELNET session time-out in seconds. - Ace20: when trying to create row in a table that already has row with the same values, if set of values has to be uniqe in table, this attribute is set to the index of the existing row.

systemPort

1.3.6.1.4.1.164.6.2.15

systemPsEntry

1.3.6.1.4.1.164.6.2.25.1

not-accessible

INT systemPsIndex1

1.3.6.1.4.1.164.6.2.25.1.1

INTEGER

read-only

First Index. In HUBs: 1 = PS-A slot 2 = PS-B slot. In SA units: 1 = PS1 2 = PS2 Default = 1

INT systemPsIndex2

1.3.6.1.4.1.164.6.2.25.1.2

INTEGER

read-only

Second Index. In HUBs: 1 always. In SA units: 1 = Local 2 = Remote Default = 1.

systemPsTable

1.3.6.1.4.1.164.6.2.25

not-accessible

This table describes the PS types of a device. Usage of this table is specified in the device's NMS SRS

INT systemPsType

1.3.6.1.4.1.164.6.2.25.1.3

INTEGER

read-only

The type of PS, for a stand-alone product. acDc - AC with rj45 DC.

INT systemReset

1.3.6.1.4.1.164.6.2.13

INTEGER

read-write

Reset action to be performed on the system.

INT systemResetAllStatsCmd

1.3.6.1.4.1.164.6.2.16

INTEGER

read-write

Reset statistics of all ports and connections of the device.

systems

1.3.6.1.4.1.164.6.1

INT systemSaveAndResetAllStatsCmd

1.3.6.1.4.1.164.6.2.23

INTEGER

read-write

on - a command to Save data of Current Period in Last Period data-set and start a new counting period for Current Period. off - agent will automatically change to this value, after performing the command.

STR systemTime

1.3.6.1.4.1.164.6.2.14.2

DisplayString

read-write

System time.

systemTiming

1.3.6.1.4.1.164.6.2.14

OCT tftpError

1.3.6.1.4.1.164.6.2.12.7

OCTET STRING

read-only

The MSB represents the standard error code. The LSB represents the private error code. 0x0000 is No Error 0x0100 is File Not Found 0x0400 is Illegal TFTP operation 0x0500 is Unknown transfer ID 0x0001 is Server Overflow 0x0002 is No empty UDP port 0x0003 is No empty connection 0x0004 is Illegal File Mode 0x0007 is Illegal PDU size

INT tftpRetryTimeOut

1.3.6.1.4.1.164.6.2.12.4

INTEGER

read-write

General Retransmission time-out value (seconds)

INT tftpStatus

1.3.6.1.4.1.164.6.2.12.6

INTEGER

read-write

Status of tftp session. When a session ended with success, the tftpStatus should be endedOk(6). Before restarting a tftp session, the NMS should set the tftpStatus to noOp(2). That's the reason of ACCESS read-write to this field.

NTF tftpStatusChangeTrap

1.3.6.1.4.1.164.6.1.0.1

This trap is sent whenever the status of tftp changed.

INT tftpTotalTimeOut

1.3.6.1.4.1.164.6.2.12.5

INTEGER

read-write

Total Retransmission time-out value (seconds)

trapEntry

1.3.6.1.4.1.164.6.2.11.1

not-accessible

INT trapID

1.3.6.1.4.1.164.6.2.11.1.1

INTEGER

read-only

This value indicates an index of a specific trap

trapTable

1.3.6.1.4.1.164.6.2.11

not-accessible

This table includes the last few traps generated by the agent, for future retrieval. The table has a limited capacity. If traps are not retrieved in proper time, they will be over-written by new traps

TIK trapTimeSinceOccurrence

1.3.6.1.4.1.164.6.2.11.1.3

TimeTicks

read-only

This value indicates the amount of time passed since the occurrence of the event that trigger this trap.

STR trapVal

1.3.6.1.4.1.164.6.2.11.1.2

DisplayString

read-only

This value is the actual ASCII description of the trap.

unknown

1.3.6.1.4.1.164.6.1.7.9

wanGen

1.3.6.1.4.1.164.3.1

What Is DACS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

RFC description

DACS-MIB

What Is DACS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description