- - - For MP & FCD - - -
    This object represents 3  parameters by 2 Octets:
    Spare       -MSB nibble, always=0 hex
    E Lead Output          -    nibble,
    Reverse Polarity Output-    nibble,
    Metering Pulse Output  -LSB nibble.

    Each nibble:
 0 hex = 0000 = Not Applicable
    1 hex = 0001 = Rx A bit
 2 hex = 0010 = Rx A bit inverse
 3 hex = 0011 = Rx B bit
 4 hex = 0100 = Rx B bit inverse
 5 hex = 0101 = Rx C bit
 6 hex = 0110 = Rx C bit inverse
 7 hex = 0111 = Rx D bit
 8 hex = 1000 = Rx D bit inverse
 9 hex = 1001 = none
 A-F hex - not used (invalid values)
    This object will be RO if prtExVc2SigProfile is NOT manual.
    
          
   - - - For WR II - - -

This object represents the following 2 parameters in 1 Octet:
1. On/Off hook signaling receive mode from the T1/E1 into the FXS/FXO (MSB nibble 1).
2. E (Ear) Signaling receive mode from the T1/E1 into the E&M (LSB nibble 2). 

   Each nibble:
     ---------------------------------------------------------------------------------------
     Value          On/Off Hook       E (Ear)
     ---------------------------------------------------------------------------------------
 0 hex = 0000   Not Applicable    Not Applicable
 1 hex = 0001   Rx A bit                      Rx A bit
 2 hex = 0010   Rx A bit inverse      Rx A bit inverse
 3 hex = 0011   Rx B bit                      Rx B bit
 4 hex = 0100   Rx B bit inverse      Rx B bit inverse
 5-F hex        not used-invalid      not Used-invalid


 Default value: 11