All MIBs › DACS-MIB › prtExPh1MlLineCode
prtExPh1MlLineCode
Module: DACS-MIB
OID (symbolic): DACS-MIB::prtExPh1MlLineCode
OID (numeric): 1.3.6.1.4.1.164.3.2.3.2.2.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
This attribute is the line code parameter used for T1/E1 interface. The user should select only the parameters which are relevant to the specific card: T1 line code parameters for MPH.1/T1 E1 line code parameters for MPH.1/E1. This parameter has the same values as dsx1LineCoding in T1/E1 MIB (RFC-1406). The parameters in dsx1LineCoding are: dsx1JBZS (1) dsx1B8ZS (2) dsx1HDB3 (3) dsx1ZBTSI (4) dsx1AMI (5) other (6)
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.3.2.3.2.2.1.1.6 snmpwalk -v2c -c public <target> DACS-MIB::prtExPh1MlLineCode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.164.3.2.3.2.2.1.1.6.1 snmpget -v2c -c public <target> DACS-MIB::prtExPh1MlLineCode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.164.3.2.3.2.2.1.1.6.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> prtExPh1MlLineCode.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.164 | rad | DACS-MIB |
| 1.3.6.1.4.1.164.3 | radWan | DACS-MIB |
| 1.3.6.1.4.1.164.3.2 | muxHub | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3 | prtMux | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2 | cnfgPrtMux | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.2 | prtPh1MlCnfg | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.2.1 | prtExPh1MlCnfgTable | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1 | prtExPh1MlCnfgEntry | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.6 | prtExPh1MlLineCode | DACS-MIB |