All MIBs › MICOM-MPANL-LMI-MIB
Category: WAN
Description: Manages MICOM MultiProtocol ANL LMI interface parameters for WAN connectivity.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is MICOM-MPANL-LMI-MIB?
This is a MICOM Communications vendor MIB module for MultiProtocol ANL (Access Network Link) LMI interfaces, used in MICOM's WAN access/multiplexer equipment supporting frame relay-style network access. It exposes per-interface service configuration objects such as Closed User Group (CUG) facility/access settings, DNA suffix addressing, and network link ('netlink') tables, alongside general device configuration like model type and software revision. Its monitoring focus is largely configuration/service-provisioning state for WAN links rather than hardware environmentals, though mcmMLMIGenCfgSoftwareRev does let an operator confirm the running software version on the device. It appears to build on general X.25/frame-relay-style network-layer addressing concepts (CUG, DNA) rather than a specific IETF standard MIB. It would be deployed on MICOM WAN access multiplexers/routers providing multiprotocol ANL LMI service to leased-line or packet-switched WAN circuits. Engineers can download the MICOM-MPANL-LMI-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in MICOM-MPANL-LMI-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- MICOM WAN access multiplexer/router
Monitoring Examples
An operator would poll mcmMLMIServiceTable / mcmMLMIServiceEntry indexed by mcmMLMIServiceIfIndex to check mcmMLMIServiceCUGFacility and CUGAccess settings, confirming a WAN circuit's closed-user-group restrictions are correctly provisioned. mcmMLMIServiceDNASuffix would be checked when troubleshooting addressing/routing issues on a MICOM WAN link. mcmMLMIGenCfgSoftwareRev and mcmMLMIGenCfg4400Type provide device model and firmware version for inventory/compliance checks, while mcmMLMINetlinkTable / Entry track configured network link relationships for the interface.
What Can Be Monitored
- CUG facility/access configuration per interface
- DNA suffix addressing
- software revision
- network link configuration
This MIB depends on
Related MIBs
Imported Objects
From MICOM-OSCAR-MIB
| micom-oscar |
From MICOM-SYS-MIB
| mcmSysAsciiTimeOfDay | OBJECT-TYPE |
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Counter |
From RFC1213-MIB
| DisplayString |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| micom_mlmi | 1.3.6.1.4.1.335.1.4.20 | |||
| NTF mcmLMISVCCallRejected | 1.3.6.1.4.1.335.1.4.20.0.1 | NAME = ; DESC = This trap will be generated from the PANL LMI \ module. It will trigger if a SVC Call is rejected \ because the outgoing netlink number is \ identical to the incoming netlink number.\ Severity Level: MAJOR.; HELP = Please verify the configuration parameters of \ the netlink number or DNA number.; | ||
| NTF mcmLMIIncompatibleType | 1.3.6.1.4.1.335.1.4.20.0.2 | NAME = ; DESC = This trap will be generated from the PANL LMI \ module. It will trigger if incompatible access devices are connected. \ Severity Level: MAJOR.; HELP = Check model types for compatiblity.; | ||
| NTF mcmLMIT317TimerExpired | 1.3.6.1.4.1.335.1.4.20.0.3 | NAME = ; DESC = This trap will be generated from PANL LMI \ module. It will trigger if the T317 timer \ expires.\ Severity Level: INFORMATIVE.; HELP = Check to see if all circuits have been cleared.; | ||
| NTF mcmMLMIReachedMaxUnsucessfulRestartAttemps | 1.3.6.1.4.1.335.1.4.20.0.4 | NAME = ; DESC = This trap will be generated from the PANL LMI \ module. It will trigger if the number of \ the unsuccessful restart attempts reaches \ reaches its maximum.\ Severity Level: INFORMATIVE.; HELP = Check the number of restart attempts allowed \ in configuration.; | ||
| mlmi_configuration | 1.3.6.1.4.1.335.1.4.20.1 | |||
| INT mcmMLMIGenCfg4400Type | 1.3.6.1.4.1.335.1.4.20.1.1 | INTEGER | read-only | NAME = ; DESC = ** NOTE:THIS OBJECT IS OBSOLETE AND NO \ LONGER SUPPORTED IN RELEASE 3.0 AND \ BEYOND. \ The value of this object indicates the \ access devices hardware type for use \ by the MPANL LMI protocol.\ (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_DISP ; |
| STR mcmMLMIGenCfgSoftwareRev | 1.3.6.1.4.1.335.1.4.20.1.2 | DisplayString | read-only | NAME = ; DESC = This object identifies the MLMI software \ module revision number. (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_DISP ; |
| mcmMLMIServiceTable | 1.3.6.1.4.1.335.1.4.20.1.3 | not-accessible | NAME = ; DESC = The MPANL LMI Service Configuration Parameters \ table. (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; | |
| mcmMLMIServiceEntry | 1.3.6.1.4.1.335.1.4.20.1.3.1 | not-accessible | NAME = ; DESC = An entry in the MPANL LMI Service Configuration \ Parameters table. (Operational); HELP = ; CAPABILITIES = ; | |
| INT mcmMLMIServiceIfIndex | 1.3.6.1.4.1.335.1.4.20.1.3.1.1 | INTEGER | read-only | NAME = ; DESC = The ifIndex of the MPANL LMI interface. \ (Analogous to the ifIndex pointer in the \ MIB II Interfaces Group, but specific to \ the MPANL LMI Service Configuration table.) \ (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmMLMIServiceCUGFacility | 1.3.6.1.4.1.335.1.4.20.1.3.1.2 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the CUG \ (Close User Group) facility type. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmMLMIServiceCUGAccess | 1.3.6.1.4.1.335.1.4.20.1.3.1.3 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the subscribed \ CUG access rights. (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmMLMIServiceCUGICType | 1.3.6.1.4.1.335.1.4.20.1.3.1.4 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates the CUG \ Interlock Code type. (Operational); HELP = ; CAPABILITIES = ; |
| STR mcmMLMIServiceCUGIC | 1.3.6.1.4.1.335.1.4.20.1.3.1.5 | DisplayString | read-only | NAME = ; DESC = The value of this object indicates the CUG \ Interlock Codes (in T.50) that belong to the \ particular access device service. (Operational); HELP = ; CAPABILITIES = ; |
| STR mcmMLMIServiceDNASuffix | 1.3.6.1.4.1.335.1.4.20.1.3.1.6 | DisplayString | read-only | NAME = ; DESC = The value of this object contains up to \ 3 bytes of DNA Suffix (in T.50) that is \ associated with the service. (Operational); HELP = ; CAPABILITIES = ; |
| INT nvmMLMIGenCfg4400Type | 1.3.6.1.4.1.335.1.4.20.1.4 | INTEGER | read-write | NAME = ; DESC = ** NOTE:THIS OBJECT IS OBSOLETE AND NO \ LONGER SUPPORTED IN RELEASE 3.0 AND \ BEYOND. \ The value of this object indicates the \ access devices hardware type for use \ by the MPANL LMI protocol.\ (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_DISP ; |
| nvmMLMIServiceTable | 1.3.6.1.4.1.335.1.4.20.1.5 | not-accessible | NAME = ; DESC = The MPANL LMI Service Configuration Parameters \ table. (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; | |
| nvmMLMIServiceEntry | 1.3.6.1.4.1.335.1.4.20.1.5.1 | not-accessible | NAME = ; DESC = An entry in the MPANL LMI Service Configuration \ Parameters table. (Configuration); HELP = ; CAPABILITIES = ; | |
| INT nvmMLMIServiceIfIndex | 1.3.6.1.4.1.335.1.4.20.1.5.1.1 | INTEGER | read-only | NAME = ; DESC = The ifIndex of the MPANL LMI interface. \ (Analogous to the ifIndex pointer in the \ MIB II Interfaces Group, but specific to \ the MPANL LMI Service Configuration table.) \ (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmMLMIServiceCUGFacility | 1.3.6.1.4.1.335.1.4.20.1.5.1.2 | INTEGER | read-write | NAME = ; DESC = The value of this object indicates the CUG \ (Close User Group) facility type. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmMLMIServiceCUGAccess | 1.3.6.1.4.1.335.1.4.20.1.5.1.3 | INTEGER | read-write | NAME = ; DESC = The value of this object indicates the subscribed \ CUG access rights. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmMLMIServiceCUGICType | 1.3.6.1.4.1.335.1.4.20.1.5.1.4 | INTEGER | read-write | NAME = ; DESC = The value of this object indicates the CUG \ Interlock Code type. (Configuration); HELP = ; CAPABILITIES = ; |
| STR nvmMLMIServiceCUGIC | 1.3.6.1.4.1.335.1.4.20.1.5.1.5 | DisplayString | read-write | NAME = ; DESC = The value of this object indicates the CUG \ Interlock Codes (in T.50) that belong to the \ particular access device service. (Configuration); HELP = ; CAPABILITIES = ; |
| STR nvmMLMIServiceDNASuffix | 1.3.6.1.4.1.335.1.4.20.1.5.1.6 | DisplayString | read-write | NAME = ; DESC = The value of this object contains up to \ 3 bytes of DNA Suffix (in T.50) that is \ associated with the service. (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmMLMIServiceRowStatus | 1.3.6.1.4.1.335.1.4.20.1.5.1.7 | INTEGER | read-write | NAME = ; DESC = This object is used to create, modify and delete \ rows in the nvmMLMIService Table. (Configuration); HELP = The active enumeration only indicates the status \ of a row. A row is automatically set to active \ after it is added. To modify a row it must be \ in the active state.; CAPABILITIES = ; |
| mcmMLMINetlinkTable | 1.3.6.1.4.1.335.1.4.20.1.6 | not-accessible | NAME = ; DESC = The MPANL LMI Netlink Configuration Parameters \ table. (Operational); HELP = ; CAPABILITIES = NET_DISP, VPN_DISP; | |
| mcmMLMINetlinkEntry | 1.3.6.1.4.1.335.1.4.20.1.6.1 | not-accessible | NAME = ; DESC = An entry in the MPANL LMI Netlink Configuration \ Parameters table. (Operational); HELP = ; CAPABILITIES = ; | |
| INT mcmMLMINetlinkIfIndex | 1.3.6.1.4.1.335.1.4.20.1.6.1.1 | INTEGER | read-only | NAME = ; DESC = The value of this object \ identifies a unique netlink \ index value in the netlink \ operational table.\ (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmMLMINetlinkTunnelingPVCDlci | 1.3.6.1.4.1.335.1.4.20.1.6.1.2 | INTEGER | read-only | NAME = ; DESC = The DLCI associated with the \ tunneling PVC; (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmMLMINetlinkMpanlMode | 1.3.6.1.4.1.335.1.4.20.1.6.1.3 | INTEGER | read-only | NAME = ; DESC = The MPANL port mode.; (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmMLMINetlinkDLCIAssignMethod | 1.3.6.1.4.1.335.1.4.20.1.6.1.4 | INTEGER | read-only | NAME = ; DESC = The DLCI assignment method \ used for the dce option only.; (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmMLMINetlinkRstrtT316Timer | 1.3.6.1.4.1.335.1.4.20.1.6.1.5 | INTEGER | read-only | NAME = ; DESC = The value of this object \ indicates the time in seconds \ of when the Q.933 Message is \ restarted.; (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmMLMINetlinkRstrtAckT317Timer | 1.3.6.1.4.1.335.1.4.20.1.6.1.6 | INTEGER | read-only | NAME = ; DESC = The value of this object \ indicates the time in seconds \ of when the Q.933 Ack Message is \ restarted.; (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmMLMINetlinkNumUnsuccesRstrtAtmpts | 1.3.6.1.4.1.335.1.4.20.1.6.1.7 | INTEGER | read-only | NAME = ; DESC = The value of this object \ indicates the number of \ unsuccessful restart attempts. \ (Operational); HELP = ; CAPABILITIES = ; |
| nvmMLMINetlinkTable | 1.3.6.1.4.1.335.1.4.20.1.7 | not-accessible | NAME = ; DESC = The MPANL LMI Netlink Configuration Parameters \ table. (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; | |
| nvmMLMINetlinkEntry | 1.3.6.1.4.1.335.1.4.20.1.7.1 | not-accessible | NAME = ; DESC = An entry in the MPANL LMI Netlink Configuration \ Parameters table. (Configuration); HELP = ; CAPABILITIES = ; | |
| INT nvmMLMINetlinkIfIndex | 1.3.6.1.4.1.335.1.4.20.1.7.1.1 | INTEGER | read-only | NAME = ; DESC = The value of this object \ identifies a unique netlink \ index value in the netlink \ configuration table. \ (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmMLMINetlinkTunnelingPVCDlci | 1.3.6.1.4.1.335.1.4.20.1.7.1.2 | INTEGER | read-only | NAME = ; DESC = The DLCI associated with the \ tunneling PVC \ (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmMLMINetlinkDLCIAssignMethod | 1.3.6.1.4.1.335.1.4.20.1.7.1.3 | INTEGER | read-write | NAME = ; DESC = The DLCI assignment method \ used for the dce option only.\ (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmMLMINetlinkRstrtT316Timer | 1.3.6.1.4.1.335.1.4.20.1.7.1.4 | INTEGER | read-write | NAME = ; DESC = The value of this object \ indicates the time in seconds \ of when the Q.933 Message is \ restarted.\ (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmMLMINetlinkRstrtAckT317Timer | 1.3.6.1.4.1.335.1.4.20.1.7.1.5 | INTEGER | read-write | NAME = ; DESC = The value of this object \ indicates the time in seconds \ of when the Q.933 Ack Message is \ restarted.\ (Configuration); HELP = ; CAPABILITIES = ; |
| INT nvmMLMINetlinkNumUnsuccesRstrtAtmpts | 1.3.6.1.4.1.335.1.4.20.1.7.1.6 | INTEGER | read-write | NAME = ; DESC = The value of this object \ indicates the number of \ unsuccessful restart attempts. \ (Configuration); HELP = ; CAPABILITIES = ; |
| mlmi_control | 1.3.6.1.4.1.335.1.4.20.2 | |||
| INT mcmMLMICntrAction | 1.3.6.1.4.1.335.1.4.20.2.1 | INTEGER | write-only | NAME = ; DESC = ** NOTE:THIS OBJECT IS OBSOLETE AND NO \ LONGER SUPPORTED IN RELEASE 3.0 AND \ BEYOND. \ Setting this object to reset(1) will zero \ the values of the counters in the MPANL \ LMI Statistics group.; HELP = When set to reset(1), the following counter \ objects are reset: \ mcmMLMIStatsActiveVCs \ mcmMLMIStatsRequestedCalls \ mcmMLMIStatsInitiatedCalls \ mcmMLMIStatsFailedCalls \ mcmMLMIStatsSucceededCalls \ mcmMLMIStatsReleasedCalls \ mcmMLMIStatsDisconnectedCalls \ mcmMLMIStatsAdmittedCUGs \ mcmMLMIStatsRejectedCUGs; CAPABILITIES = NET_OPER, VPN_OPER; |
| mlmi_statistics | 1.3.6.1.4.1.335.1.4.20.3 | |||
| CTR mcmMLMIStatsActiveVCs | 1.3.6.1.4.1.335.1.4.20.3.1 | Counter | read-only | NAME = ; DESC = Counter representing the number of active VCs \ maintained by the MLMI. HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| CTR mcmMLMIStatsRequestedCalls | 1.3.6.1.4.1.335.1.4.20.3.2 | Counter | read-only | NAME = ; DESC = Counter representing the number of SL_CONNECT_REQ \ received by the MLMI from upper applications. ; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| CTR mcmMLMIStatsInitiatedCalls | 1.3.6.1.4.1.335.1.4.20.3.3 | Counter | read-only | NAME = ; DESC = Counter representing the number of setup messages \ sent to MPANL masters. ; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| CTR mcmMLMIStatsFailedCalls | 1.3.6.1.4.1.335.1.4.20.3.4 | Counter | read-only | NAME = ; DESC = Counter representing the number of calls \ rejected by MLMI during establishment phase. ; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| CTR mcmMLMIStatsSucceededCalls | 1.3.6.1.4.1.335.1.4.20.3.5 | Counter | read-only | NAME = ; DESC = Counter representing the number of calls \ established by MLMI. ; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| CTR mcmMLMIStatsReleasedCalls | 1.3.6.1.4.1.335.1.4.20.3.6 | Counter | read-only | NAME = ; DESC = Counter representing the number of call release \ messages received by MLMI. ; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| CTR mcmMLMIStatsDisconnectedCalls | 1.3.6.1.4.1.335.1.4.20.3.7 | Counter | read-only | NAME = ; DESC = Counter representing the number of disconnect requests \ received by MLMI from upper applications. ; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| CTR mcmMLMIStatsAdmittedCUGs | 1.3.6.1.4.1.335.1.4.20.3.8 | Counter | read-only | NAME = ; DESC = Counter representing the number of admitted calls \ whose setup messages have the correct CUG. ; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| CTR mcmMLMIStatsRejectedCUGs | 1.3.6.1.4.1.335.1.4.20.3.9 | Counter | read-only | NAME = ; DESC = Counter representing the number of rejected calls \ whose setup messages have the wrong CUG. ; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| mcmMLMINetlinkStatTable | 1.3.6.1.4.1.335.1.4.20.3.10 | not-accessible | NAME = ; DESC = The MPANL LMI Netlink Statistic Parameters \ table.; HELP = ; CAPABILITIES = NET_DISP, VPN_DISP; | |
| mcmMLMINetlinkStatEntry | 1.3.6.1.4.1.335.1.4.20.3.10.1 | not-accessible | NAME = ; DESC = An entry in the MPANL LMI Netlink \ Statistic Parameters table.; HELP = ; CAPABILITIES = ; | |
| INT mcmMLMINetlinkStatIfIndex | 1.3.6.1.4.1.335.1.4.20.3.10.1.1 | INTEGER | read-only | NAME = ; DESC = The value of this object \ identifies a unique netlink \ index value in the netlink \ statistics table.; HELP = ; CAPABILITIES = ; |
| CTR mcmMLMINetlinkStatMsgRxSetup | 1.3.6.1.4.1.335.1.4.20.3.10.1.2 | Counter | read-only | NAME = ; DESC = The number of setup messages \ received.; HELP = ; CAPABILITIES = ; |
| CTR mcmMLMINetlinkStatMsgTxSetup | 1.3.6.1.4.1.335.1.4.20.3.10.1.3 | Counter | read-only | NAME = ; DESC = The number of setup messages \ transmitted.; HELP = ; CAPABILITIES = ; |
| CTR mcmMLMINetlinkStatMsgRxCallPrcdngs | 1.3.6.1.4.1.335.1.4.20.3.10.1.4 | Counter | read-only | NAME = ; DESC = The number of call proceeding \ messages received.; HELP = ; CAPABILITIES = ; |
| CTR mcmMLMINetlinkStatMsgTxCallPrcdngs | 1.3.6.1.4.1.335.1.4.20.3.10.1.5 | Counter | read-only | NAME = ; DESC = The number of call proceeding \ messages transmitted.; HELP = ; CAPABILITIES = ; |
| CTR mcmMLMINetlinkStatMsgRxConn | 1.3.6.1.4.1.335.1.4.20.3.10.1.6 | Counter | read-only | NAME = ; DESC = The number of connect messages \ received.; HELP = ; CAPABILITIES = ; |
| CTR mcmMLMINetlinkStatMsgTxConn | 1.3.6.1.4.1.335.1.4.20.3.10.1.7 | Counter | read-only | NAME = ; DESC = The number of connect messages \ transmitted.; HELP = ; CAPABILITIES = ; |
| CTR mcmMLMINetlinkStatMsgRxDisConn | 1.3.6.1.4.1.335.1.4.20.3.10.1.8 | Counter | read-only | NAME = ; DESC = The number of disconnect messages \ received.; HELP = ; CAPABILITIES = ; |
| CTR mcmMLMINetlinkStatMsgTxDisConn | 1.3.6.1.4.1.335.1.4.20.3.10.1.9 | Counter | read-only | NAME = ; DESC = The number of disconnect messages \ transmitted.; HELP = ; CAPABILITIES = ; |
| CTR mcmMLMINetlinkStatMsgRxRls | 1.3.6.1.4.1.335.1.4.20.3.10.1.10 | Counter | read-only | NAME = ; DESC = The number of release messages \ received.; HELP = ; CAPABILITIES = ; |
| CTR mcmMLMINetlinkStatMsgTxRls | 1.3.6.1.4.1.335.1.4.20.3.10.1.11 | Counter | read-only | NAME = ; DESC = The number of release messages \ transmitted.; HELP = ; CAPABILITIES = ; |
| CTR mcmMLMINetlinkStatMsgRxRlseComp | 1.3.6.1.4.1.335.1.4.20.3.10.1.12 | Counter | read-only | NAME = ;1 DESC = The number of release complete \ messages received.; HELP = ; CAPABILITIES = ; |
| CTR mcmMLMINetlinkStatMsgTxRlseComp | 1.3.6.1.4.1.335.1.4.20.3.10.1.13 | Counter | read-only | NAME = ; DESC = The number of release complete \ messages transmitted.; HELP = ; CAPABILITIES = ; |
| CTR mcmMLMINetlinkStatMsgRxStatusInq | 1.3.6.1.4.1.335.1.4.20.3.10.1.14 | Counter | read-only | NAME = ; DESC = The number of status inquiry \ messages received.; HELP = ; CAPABILITIES = ; |
| CTR mcmMLMINetlinkStatMsgTxStatusInq | 1.3.6.1.4.1.335.1.4.20.3.10.1.15 | Counter | read-only | NAME = ; DESC = The number of status inquiry \ messages transmitted.; HELP = ; CAPABILITIES = ; |
| CTR mcmMLMINetlinkStatMsgRxStatus | 1.3.6.1.4.1.335.1.4.20.3.10.1.16 | Counter | read-only | NAME = ; DESC = The number of status requests \ received.; HELP = ; CAPABILITIES = ; |
| CTR mcmMLMINetlinkStatMsgTxStatus | 1.3.6.1.4.1.335.1.4.20.3.10.1.17 | Counter | read-only | NAME = ; DESC = The number of status requests \ transmitted.; HELP = ; CAPABILITIES = ; |
| CTR mcmMLMINetlinkStatLocalSVC | 1.3.6.1.4.1.335.1.4.20.3.10.1.18 | Counter | read-only | NAME = ; DESC = The number of local SVCs.; HELP = ; CAPABILITIES = ; |
| CTR mcmMLMINetlinkStatTransitSVC | 1.3.6.1.4.1.335.1.4.20.3.10.1.19 | Counter | read-only | NAME = ; DESC = The number of transit SVCs.; HELP = ; CAPABILITIES = ; |
| CTR mcmMLMINetlinkStatVoiceCalls | 1.3.6.1.4.1.335.1.4.20.3.10.1.20 | Counter | read-only | NAME = ; DESC = The number of voice calls \ on this link.; HELP = ; CAPABILITIES = ; |
| CTR mcmMLMINetlinkStatLanCalls | 1.3.6.1.4.1.335.1.4.20.3.10.1.21 | Counter | read-only | NAME = ; DESC = The number of LAN calls on \ this link.; HELP = ; CAPABILITIES = ; |
| CTR mcmMLMINetlinkStatRsiCalls | 1.3.6.1.4.1.335.1.4.20.3.10.1.22 | Counter | read-only | NAME = ; DESC = The number of RSI calls on \ this link.; HELP = ; CAPABILITIES = ; |
| CTR mcmMLMINetlinkStatSpvcCalls | 1.3.6.1.4.1.335.1.4.20.3.10.1.23 | Counter | read-only | NAME = ; DESC = The number of SVC calls on \ this link.; HELP = ; CAPABILITIES = ; |
| CTR mcmMLMINetlinkStatLnkupCnt | 1.3.6.1.4.1.335.1.4.20.3.10.1.24 | Counter | read-only | NAME = ; DESC = The number of times the \ MPANL came up.; HELP = ; CAPABILITIES = ; |
| CTR mcmMLMINetlinkStatLnkDownCnt | 1.3.6.1.4.1.335.1.4.20.3.10.1.25 | Counter | read-only | NAME = ; DESC = The number of times the \ MPANL came down.; HELP = ; CAPABILITIES = ; |
| mcmMLMICircuitStatTable | 1.3.6.1.4.1.335.1.4.20.3.11 | not-accessible | NAME = ; DESC = The MPANL LMI Circuit Statistic Parameters \ table.; HELP = ; CAPABILITIES = NET_DISP, VPN_DISP; | |
| mcmMLMICircuitStatEntry | 1.3.6.1.4.1.335.1.4.20.3.11.1 | not-accessible | NAME = ; DESC = An entry in the MPANL LMI Circuit \ Statistic Parameters table.; HELP = ; CAPABILITIES = ; | |
| INT mcmMLMICircuitStatIfIndex | 1.3.6.1.4.1.335.1.4.20.3.11.1.1 | INTEGER | read-only | NAME = ; DESC = The value of this object \ identifies a unique circuit \ index value in the circuit \ statistics table.; HELP = ; CAPABILITIES = ; |
| INT mcmMLMICircuitStatSVCDLCI | 1.3.6.1.4.1.335.1.4.20.3.11.1.2 | INTEGER | read-only | NAME = ; DESC = The Data link Connection \ Identifier(DLCI) for a \ particular Switched Virtual \ Circuit(SVC).; HELP = ; CAPABILITIES = ; |
| CTR mcmMLMICircuitStatMsgRxStatus | 1.3.6.1.4.1.335.1.4.20.3.11.1.3 | Counter | read-only | NAME = ; DESC = The number of status messages \ received on a specific SVC.; HELP = ; CAPABILITIES = ; |
| CTR mcmMLMICircuitStatMsgTxStatus | 1.3.6.1.4.1.335.1.4.20.3.11.1.4 | Counter | read-only | NAME = ; DESC = The number of setup messages \ transmitted on a specific SVC.; HELP = ; CAPABILITIES = ; |
| CTR mcmMLMICircuitStatMsgRxStatusInq | 1.3.6.1.4.1.335.1.4.20.3.11.1.5 | Counter | read-only | NAME = ; DESC = The number of status inquiries \ received on a specific SVC.; HELP = ; CAPABILITIES = ; |
| CTR mcmMLMICircuitStatMsgTxStatusInq | 1.3.6.1.4.1.335.1.4.20.3.11.1.6 | Counter | read-only | NAME = ; DESC = The number of status inquiries \ transmitted on a specific SVC.; HELP = ; CAPABILITIES = ; |
| mlmi_status | 1.3.6.1.4.1.335.1.4.20.4 | |||
| mcmMLMINetlinkStatusTable | 1.3.6.1.4.1.335.1.4.20.4.1 | not-accessible | NAME = ; DESC = The MPANL LMI Netlink Status Parameters \ table.; HELP = ; CAPABILITIES = NET_DISP, VPN_DISP; | |
| mcmMLMINetlinkStatusEntry | 1.3.6.1.4.1.335.1.4.20.4.1.1 | not-accessible | NAME = ; DESC = An entry in the MPANL LMI Netlink Status \ Parameters table.; HELP = ; CAPABILITIES = ; | |
| INT mcmMLMINetlinkStatusIfIndex | 1.3.6.1.4.1.335.1.4.20.4.1.1.1 | INTEGER | read-only | NAME = ; DESC = The value of this object \ identifies a unique netlink \ index value in the netlink \ status table.; (Operational); HELP = ; CAPABILITIES = ; |
| INT mcmMLMINetlinkStatusMPANLStatus | 1.3.6.1.4.1.335.1.4.20.4.1.1.2 | INTEGER | read-only | NAME = ; DESC = The MPANL link status for both \ DTE and DCE.; HELP = ; CAPABILITIES = ; |
| INT mcmMLMINetlinkStatusRestartState | 1.3.6.1.4.1.335.1.4.20.4.1.1.3 | INTEGER | read-only | NAME = ; DESC = The Q.933 link recovery restart \ states.; HELP = ; CAPABILITIES = ; |
| INT mcmMLMINetlinkStatusLAPFState | 1.3.6.1.4.1.335.1.4.20.4.1.1.4 | INTEGER | read-only | NAME = ; DESC = The LAPF state as seen by \ MLMI.; HELP = ; CAPABILITIES = ; |
| INT mcmMLMINetlinkStatusFrCoreState | 1.3.6.1.4.1.335.1.4.20.4.1.1.5 | INTEGER | read-only | NAME = ; DESC = The Frame Relay Core state \ as seen by MLMI.; HELP = ; CAPABILITIES = ; |
| INT mcmMLMINetlinkStatusTxThrput | 1.3.6.1.4.1.335.1.4.20.4.1.1.6 | INTEGER | read-only | NAME = ; DESC = This object has been OBSOLETED for software \ releases beginning with Release 3.0. \ The total throughput in bytes, \ used for outgoing traffic on \ the netlink.; HELP = ; CAPABILITIES = ; |
| INT mcmMLMINetlinkStatusRxThrput | 1.3.6.1.4.1.335.1.4.20.4.1.1.7 | INTEGER | read-only | NAME = ; DESC = This object has been OBSOLETED for software \ releases beginning with Release 3.0. \ The total throughput in bytes, \ for incoming traffic on the \ netlink.; HELP = ; CAPABILITIES = ; |
| mcmMLMICircuitStatusTable | 1.3.6.1.4.1.335.1.4.20.4.2 | not-accessible | NAME = ; DESC = The MPANL LMI Circuit Status Parameters \ table.; HELP = ; CAPABILITIES = NET_DISP, VPN_DISP; | |
| mcmMLMICircuitStatusEntry | 1.3.6.1.4.1.335.1.4.20.4.2.1 | not-accessible | NAME = ; DESC = An entry in the MPANL LMI Circuit Status \ Parameters table.; HELP = ; CAPABILITIES = ; | |
| INT mcmMLMICircuitStatusIfIndex | 1.3.6.1.4.1.335.1.4.20.4.2.1.1 | INTEGER | read-only | NAME = ; DESC = The value of this object \ identifies a unique netlink \ index value in the netlink \ status table.; HELP = ; CAPABILITIES = ; |
| INT mcmMLMICircuitStatusSVCDLCI | 1.3.6.1.4.1.335.1.4.20.4.2.1.2 | INTEGER | read-only | NAME = ; DESC = The Data link Connection Identifier(DLCI) for a particular Switched Virtual Circuit(SVC).; HELP = ; CAPABILITIES = ; |
| INT mcmMLMICircStatusRejectCause | 1.3.6.1.4.1.335.1.4.20.4.2.1.3 | INTEGER | read-only | NAME = ; DESC = The reject cause codes for \ SVCs.; HELP = ; CAPABILITIES = ; |
| INT mcmMLMICircStatusSVCType | 1.3.6.1.4.1.335.1.4.20.4.2.1.4 | INTEGER | read-only | NAME = ; DESC = HELP = ; CAPABILITIES = ; |
| INT mcmMLMICircStatusAttriSetupPriority | 1.3.6.1.4.1.335.1.4.20.4.2.1.5 | INTEGER | read-only | NAME = ; DESC = Circuit attribute setup priority, \ where onePriority is highest.; HELP = ; CAPABILITIES = ; |
| INT mcmMLMICircStatusAttriHoldPriority | 1.3.6.1.4.1.335.1.4.20.4.2.1.6 | INTEGER | read-only | NAME = ; DESC = Circuit attribute holding priority, \ where onePriority is highest.; HELP = ; CAPABILITIES = ; |
| INT mcmMLMICircStatusAttriDiscardPriority | 1.3.6.1.4.1.335.1.4.20.4.2.1.7 | INTEGER | read-only | NAME = ; DESC = Circuit attribute discard priority, \ where priority1 is the highest \ priority.; HELP = ; CAPABILITIES = ; |
| INT mcmMLMICircStatusClaimedBandWidth | 1.3.6.1.4.1.335.1.4.20.4.2.1.8 | INTEGER | read-only | NAME = ; DESC = The required bandwidth in bytes \ for the SVC call.; HELP = ; CAPABILITIES = ; |
| INT mcmMLMICircStatusQoSTxThrput | 1.3.6.1.4.1.335.1.4.20.4.2.1.9 | INTEGER | read-only | NAME = ; DESC = The transmit throughput \ granted in bytes.; HELP = ; CAPABILITIES = ; |
| INT mcmMLMICircStatusQoSRxThrput | 1.3.6.1.4.1.335.1.4.20.4.2.1.10 | INTEGER | read-only | NAME = ; DESC = The received throughput \ granted in bytes.; HELP = ; CAPABILITIES = ; |
| INT mcmMLMICircStatusQoSTxBrstSizGrntd | 1.3.6.1.4.1.335.1.4.20.4.2.1.11 | INTEGER | read-only | NAME = ; DESC = The transmit burst size \ granted in bytes.; HELP = ; CAPABILITIES = ; |
| INT mcmMLMICircStatusQoSRxBrstSizGrntd | 1.3.6.1.4.1.335.1.4.20.4.2.1.12 | INTEGER | read-only | NAME = ; DESC = The received burst size \ granted in bytes.; HELP = ; CAPABILITIES = ; |
| INT mcmMLMICircStatusQoSTxExRateGrntd | 1.3.6.1.4.1.335.1.4.20.4.2.1.13 | INTEGER | read-only | NAME = ; DESC = The transmit excess rate \ granted in bytes.; HELP = ; CAPABILITIES = ; |
| INT mcmMLMICircStatusQoSRxExRateGrntd | 1.3.6.1.4.1.335.1.4.20.4.2.1.14 | INTEGER | read-only | NAME = ; DESC = The received excess rate \ granted in bytes.; HELP = ; CAPABILITIES = ; |
| INT mcmMLMICircStatusPeerDLCI | 1.3.6.1.4.1.335.1.4.20.4.2.1.15 | INTEGER | read-only | NAME = ; DESC = The DLCI number at the other \ side of the connection.; HELP = ; CAPABILITIES = ; |
| INT mcmMLMICircStatusPeerNetwork | 1.3.6.1.4.1.335.1.4.20.4.2.1.16 | INTEGER | read-only | NAME = ; DESC = The Network number at the other \ side of the connection.; HELP = ; CAPABILITIES = ; |
| STR mcmMLMICircStatusCallingDNA | 1.3.6.1.4.1.335.1.4.20.4.2.1.17 | DisplayString | read-only | NAME = ; DESC = The Calling DNA number associated \ with the Data link Connection \ Identifier(DLCI) for a \ particular Switched Virtual \ Circuit(SVC).; HELP = ; CAPABILITIES = ; |
| STR mcmMLMICircStatusCalledDNA | 1.3.6.1.4.1.335.1.4.20.4.2.1.18 | DisplayString | read-only | NAME = ; DESC = The Called DNA number associated \ with the Data link Connection \ Identifier(DLCI) for a \ particular Switched Virtual \ Circuit(SVC).; HELP = ; CAPABILITIES = ; |
RFC description
Management of MICOM 4400 access device call control services, including MLMI service configuration, network links, and circuit status monitoring.
Start monitoring MICOM WAN access multiplexer/router (MultiProtocol ANL LMI) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.