All MIBs › DACS-MIB › prtHSBertCountClr
prtHSBertCountClr
Module: DACS-MIB
OID (symbolic): DACS-MIB::prtHSBertCountClr
OID (numeric): 1.3.6.1.4.1.164.3.3.3.3.2.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Setting this object (to on) initiate bert counter clear operation. Valid only when bert test is active on the specific port. (Every time a new bert test starts, the counter is automatically cleared; this command enables clearing the counter while the test is running).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.3.3.3.3.2.1.3 snmpwalk -v2c -c public <target> DACS-MIB::prtHSBertCountClr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.164.3.3.3.3.2.1.3.1 snmpget -v2c -c public <target> DACS-MIB::prtHSBertCountClr.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.164.3.3.3.3.2.1.3.1 i <value>
Start monitoring Digital Access Cross-Connect System (DACS/DSX device) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DACS-MIB::prtHSBertCountClr OID value, configure state conditions and alerts, and monitor any Digital Access Cross-Connect System (DACS/DSX device) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.164 | rad | DACS-MIB |
| 1.3.6.1.4.1.164.3 | radWan | DACS-MIB |
| 1.3.6.1.4.1.164.3.3 | dacsMux | DACS-MIB |
| 1.3.6.1.4.1.164.3.3.3 | prtDacsMux | DACS-MIB |
| 1.3.6.1.4.1.164.3.3.3.3 | prtHS | DACS-MIB |
| 1.3.6.1.4.1.164.3.3.3.3.2 | prtHSBertTable | DACS-MIB |
| 1.3.6.1.4.1.164.3.3.3.3.2.1 | prtHSBertEntry | DACS-MIB |
| 1.3.6.1.4.1.164.3.3.3.3.2.1.3 | prtHSBertCountClr | DACS-MIB |