All MIBs › DACS-MIB › prtExPhPlModemCallDelay
prtExPhPlModemCallDelay
Module: DACS-MIB
OID (symbolic): DACS-MIB::prtExPhPlModemCallDelay
OID (numeric): 1.3.6.1.4.1.164.3.2.3.2.3.3.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Time in Seconds that the device will wait before dialing to the remote device.
This feature is mostly used when there is a backup modem to the main link and the main link is down. In this case it is important to prevent the 2 devices from dialing through the backup modems to each other at the same time. It is advised to configure one side with a small call delay and the other side with a large call delay.
Legal Values are: 0 - 30, 60, 120, 180, 240, 300, 600, 900, 1200, 1500, 1800 . 65535 sec. means that this parameter is not applicable.
Default: 0 sec
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.3.2.3.2.3.3.1.8 snmpwalk -v2c -c public <target> DACS-MIB::prtExPhPlModemCallDelay
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.164.3.2.3.2.3.3.1.8.1 snmpget -v2c -c public <target> DACS-MIB::prtExPhPlModemCallDelay.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.164.3.2.3.2.3.3.1.8.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.164 | rad | DACS-MIB |
| 1.3.6.1.4.1.164.3 | radWan | DACS-MIB |
| 1.3.6.1.4.1.164.3.2 | muxHub | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3 | prtMux | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2 | cnfgPrtMux | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.3 | prtPhPlCnfg | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.3.3 | prtExPhPlModemTable | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.3.3.1 | prtExPhPlModemEntry | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.3.3.1.8 | prtExPhPlModemCallDelay | DACS-MIB |