DACS-MIB :: prtT1E1Fdl

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsDACS-MIBprtT1E1Fdl

prtT1E1Fdl

Module: DACS-MIB

OID (symbolic): DACS-MIB::prtT1E1Fdl

OID (numeric): 1.3.6.1.4.1.164.3.3.3.2.2.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This bitmap describes the use of the facili- ties data link, and is the sum of the capabili- ties:

'other' indicates that a protocol other than one following is used.

'ansi-T1-403' refers to the FDL exchange recommended by ANSI.

'att-54016' refers to ESF FDL exchanges.

'fdl-none' indicates that the device does not use the FDL. 'transFdl' indicates transition between two ports of the same card.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.3.3.3.2.2.1.7
snmpwalk -v2c -c public <target> DACS-MIB::prtT1E1Fdl

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.164.3.3.3.2.2.1.7.1
snmpget -v2c -c public <target> DACS-MIB::prtT1E1Fdl.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.164.3.3.3.2.2.1.7.1 i <value>

Start monitoring Digital Access Cross-Connect System (DACS/DSX device) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DACS-MIB::prtT1E1Fdl OID value, configure state conditions and alerts, and monitor any Digital Access Cross-Connect System (DACS/DSX device) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.164radDACS-MIB
1.3.6.1.4.1.164.3radWanDACS-MIB
1.3.6.1.4.1.164.3.3dacsMuxDACS-MIB
1.3.6.1.4.1.164.3.3.3prtDacsMuxDACS-MIB
1.3.6.1.4.1.164.3.3.3.2prtT1E1DACS-MIB
1.3.6.1.4.1.164.3.3.3.2.2prtT1E1CnfgTableDACS-MIB
1.3.6.1.4.1.164.3.3.3.2.2.1prtT1E1CnfgEntryDACS-MIB
1.3.6.1.4.1.164.3.3.3.2.2.1.7prtT1E1FdlDACS-MIB