All MIBs › CISCOSB-IpRouter › rlRip2IfConfDefInfOriginate
rlRip2IfConfDefInfOriginate
Module: CISCOSB-IpRouter
OID (symbolic): CISCOSB-IpRouter::rlRip2IfConfDefInfOriginate
OID (numeric): 1.3.6.1.4.1.9.6.1.101.26.3.1.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: if set to global RIP behavior is specified by the value of rlRip2GlobalDefaultInformationOriginate scalar if set to enabled RIP will advertise default route on this interfaces if set to passiveOnly RIP will advertise default route on this interfaces only if it is configured to passive mode
What is rlRip2IfConfDefInfOriginate?
This read-write value controls whether this specific RIP interface advertises a default route, either following the global setting, staying disabled or enabled outright, or advertising the default route only if the interface is in passive mode. An admin uses this to override the global default-route-origination behavior on a per-interface basis. For example, setting this to passiveOnly on a particular interface means it will only advertise a default route there if that interface has also been configured as passive.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.26.3.1.1.9 snmpwalk -v2c -c public <target> CISCOSB-IpRouter::rlRip2IfConfDefInfOriginate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.26.3.1.1.9.1 snmpget -v2c -c public <target> CISCOSB-IpRouter::rlRip2IfConfDefInfOriginate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.6.1.101.26.3.1.1.9.1 i <value>
Start monitoring Cisco Small Business routers/switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCOSB-IpRouter::rlRip2IfConfDefInfOriginate OID value, configure state conditions and alerts, and monitor any Cisco Small Business routers/switches from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.6 | otherEnterprises | CISCO-SMI |
| 1.3.6.1.4.1.9.6.1 | ciscoSB | CISCO-SMI |
| 1.3.6.1.4.1.9.6.1.101 | switch001 | CISCOSB-MIB |
| 1.3.6.1.4.1.9.6.1.101.26 | ipSpec | CISCOSB-IP |
| 1.3.6.1.4.1.9.6.1.101.26.3 | rip2Spec | CISCOSB-IP |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.6.1.101.26.3.1 | rsRip2IfConfTable | CISCOSB-IpRouter |
| 1.3.6.1.4.1.9.6.1.101.26.3.1.1 | rsRip2IfConfEntry | CISCOSB-IpRouter |
| 1.3.6.1.4.1.9.6.1.101.26.3.1.1.9 | rlRip2IfConfDefInfOriginate | CISCOSB-IpRouter |