HPN-ICF-DHCP-SERVER-MIB

All MIBs › HPN-ICF-DHCP-SERVER-MIB

Last Updated: 2009-05-06

Category: Protocol: DHCP, Vendor: H3C/HH3C, Vendor: HP/HPE

Description: HP Networking ICF SNMP MIB for DHCP server address pool configuration and lease statistics on HP networking devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-DHCP-SERVER-MIB?

HPN-ICF-DHCP-SERVER-MIB is an HP Networking proprietary MIB within the ICF suite for configuring and monitoring the built-in DHCP server feature on HP networking devices. It exposes configuration objects for DHCP address pools/scopes and operational objects tracking lease statistics such as active leases and pool utilization. Its monitoring value is a software service-status check: confirming the DHCP server process is running and that address pools are not exhausted, which is important for detecting a service outage or pool-exhaustion fault that would prevent clients from obtaining IP addresses. It depends conceptually on the standard DHCP protocol (RFC 2131) for the service it configures and monitors. It is typically deployed in small-to-medium enterprise or branch office networks using an HP switch/router's onboard DHCP server instead of a dedicated DHCP appliance. Network engineers evaluating or troubleshooting this functionality can download the HPN-ICF-DHCP-SERVER-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-DHCP-SERVER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP networking switch/router with onboard DHCP server

Monitoring Examples

No sample_objects were supplied, but a plausible implementation includes a DHCP pool table with scope range and lease-count objects. An administrator would poll such a table to check current lease utilization against the pool size, and a pool nearing exhaustion would reveal an impending inability to assign new IP addresses to clients.

What Can Be Monitored

DHCP pool/scope configuration
active lease count
pool utilization/exhaustion status

Imported Objects

From HPN-ICF-OID-MIB

hpnicfCommon

OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

MacAddress
RowStatus

How to Use in IPNetwork Monitor

Example using hpnicfDHCPServerReqTimes OID:

Select an HP networking switch/router with onboard DHCP server as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hpnicfDHCPServerReqTimes into the Find box to locate it in the OID tree, then select it and click OK. It reports the number of requests received by the DHCP server. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpnicfDHCPServer	1.3.6.1.4.1.11.2.14.11.15.2.101			The MIB module is used for DHCP server.
NTF hpnicfDHCPServerAddrExhaust	1.3.6.1.4.1.11.2.14.11.15.2.101.3.0.1			This trap is generated when the device DHCP server address exhaust.
NTF hpnicfDHCPServerAddrExhaustRecover	1.3.6.1.4.1.11.2.14.11.15.2.101.3.0.2			This trap is generated when the device DHCP server address exhaust recover.
NTF hpnicfDHCPServerAllocateOverflow	1.3.6.1.4.1.11.2.14.11.15.2.101.3.0.5			This trap is generated when the number of DHCP server allocated IP address in 5 minutes overflows.
I32 hpnicfDHCPServerAllocateThreshold	1.3.6.1.4.1.11.2.14.11.15.2.101.1.6	Integer32	read-write	Threshold of DHCP server allocated IP address in 5 minutes.
NTF hpnicfDHCPServerAvgIpUsageOverflow	1.3.6.1.4.1.11.2.14.11.15.2.101.3.0.3			This trap is generated when the average IP address usage of DHCP server pool in 5 minutes overflows.
I32 hpnicfDHCPServerAvgIpUseThreshold	1.3.6.1.4.1.11.2.14.11.15.2.101.1.4	Integer32	read-write	Threshold of average IP usage of a DHCP server pool in 5 minutes.
TIK hpnicfDHCPServerFirstTrapTime	1.3.6.1.4.1.11.2.14.11.15.2.101.3.1.1	TimeTicks	accessible-for-notify	Represents the first trap time.
I32 hpnicfDHCPServerIPPoolUsage	1.3.6.1.4.1.11.2.14.11.15.2.101.1.1	Integer32	read-only	Usage factor of DHCP server ip pool.
NTF hpnicfDHCPServerMaxIpUsageOverflow	1.3.6.1.4.1.11.2.14.11.15.2.101.3.0.4			This trap is generated when the maximum IP address usage of DHCP server pool in 5 minutes overflows.
I32 hpnicfDHCPServerMaxIpUseThreshold	1.3.6.1.4.1.11.2.14.11.15.2.101.1.5	Integer32	read-write	Threshold of maximum IP usage of a DHCP server pool in 5 minutes.
hpnicfDHCPServerObjects	1.3.6.1.4.1.11.2.14.11.15.2.101.1
OCT hpnicfDHCPServerPoolName	1.3.6.1.4.1.11.2.14.11.15.2.101.2.1	OCTET STRING	accessible-for-notify	DHCP server pool name.
C32 hpnicfDHCPServerReqSuccessTimes	1.3.6.1.4.1.11.2.14.11.15.2.101.1.3	Counter32	read-only	Number of requests success responses sent by the DHCP server.
C32 hpnicfDHCPServerReqTimesEx	1.3.6.1.4.1.11.2.14.11.15.2.101.1.2	Counter32	read-only	Number of requests received by the DHCP server.
hpnicfDHCPServerTables	1.3.6.1.4.1.11.2.14.11.15.2.101.2
hpnicfDHCPServerTrapObjects	1.3.6.1.4.1.11.2.14.11.15.2.101.3.1
hpnicfDHCPServerTrapPrefix	1.3.6.1.4.1.11.2.14.11.15.2.101.3.0
hpnicfDHCPServerTraps	1.3.6.1.4.1.11.2.14.11.15.2.101.3
C32 hpnicfDHCPSrvGlbPoolACKTimes	1.3.6.1.4.1.11.2.14.11.15.2.101.2.6.1.6	Counter32	read-only	Number of ACK packets sent by each DHCP address pool.
OCT hpnicfDHCPSrvGlbPoolCliDNSIPStr	1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1.8	OCTET STRING	read-write	String of DNS server ip addresses for DHCP clients. Since mostly 8 ip can be configured for a pool totally, a string is defined to get or configure 8 ip at a time.
IP hpnicfDHCPSrvGlbPoolCliDNSIPUndo	1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1.9	IpAddress	read-write	A DNS server ip address to delete. This object is only for deleting a given ip of DNS server.
OCT hpnicfDHCPSrvGlbPoolCliGWIPStr	1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1.6	OCTET STRING	read-write	String of gateway ip addresses for DHCP clients. Since mostly 8 ip can be configured for a pool totally, a string is defined to get or configure 8 ip ip at a time.
IP hpnicfDHCPSrvGlbPoolCliGWIPUndo	1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1.7	IpAddress	read-write	A gateway ip address to delete. This object is only for deleting a given ip of gateway router.
OCT hpnicfDHCPSrvGlbPoolCliNbnsIPStr	1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1.11	OCTET STRING	read-write	String of NetBios server ip addresses for DHCP clients. Since mostly 8 ip can be configured for a pool totally, so a string is defined to get or configure 8 ip at a time.
IP hpnicfDHCPSrvGlbPoolCliNbnsIPUndo	1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1.12	IpAddress	read-write	A NetBios server ip address to delete. This object is only for deleting a given ip of NetBios server.
INT hpnicfDHCPSrvGlbPoolCliNetbiosType	1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1.10	INTEGER	read-write	NetBios node type for DHCP clients.
C32 hpnicfDHCPSrvGlbPoolDiscoverTimes	1.3.6.1.4.1.11.2.14.11.15.2.101.2.6.1.4	Counter32	read-only	Number of discover packets received by each DHCP address pool.
OCT hpnicfDHCPSrvGlbPoolDomainName	1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1.5	OCTET STRING	read-write	Domain name for DHCP clients.
C32 hpnicfDHCPSrvGlbPoolInUsedIpNum	1.3.6.1.4.1.11.2.14.11.15.2.101.2.6.1.8	Counter32	read-only	Number of allocated IP addresses in each DHCP address pool.
INT hpnicfDHCPSrvGlbPoolIPInUseReset	1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1.14	INTEGER	read-write	Reset the auto binding ip of the given global pool for DHCP server.
I32 hpnicfDHCPSrvGlbPoolIPPoolUsage	1.3.6.1.4.1.11.2.14.11.15.2.101.2.6.1.1	Integer32	read-only	Utilization rate of IP addresses in each DHCP address pool, in percentage.
I32 hpnicfDHCPSrvGlbPoolLeaseDay	1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1.1	Integer32	read-write	Number of days of the lease.
I32 hpnicfDHCPSrvGlbPoolLeaseHour	1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1.2	Integer32	read-write	Number of hours of the lease.
I32 hpnicfDHCPSrvGlbPoolLeaseMinute	1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1.3	Integer32	read-write	Number of minutes of the lease.
I32 hpnicfDHCPSrvGlbPoolLeaseSecond	1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1.18	Integer32	read-write	Number of seconds of the lease.
TIK hpnicfDHCPSrvGlbPoolLeaseTime	1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1.15	TimeTicks	read-write	Number of timeticks of the lease.
INT hpnicfDHCPSrvGlbPoolLeaseUnlimited	1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1.4	INTEGER	read-write	A flag denoting if the lease of a pool is unlimited.
C32 hpnicfDHCPSrvGlbPoolOfferTimes	1.3.6.1.4.1.11.2.14.11.15.2.101.2.6.1.5	Counter32	read-only	Number of offer packets sent by each DHCP address pool.
OCT hpnicfDHCPSrvGlbPoolOptAscii	1.3.6.1.4.1.11.2.14.11.15.2.101.2.5.1.3	OCTET STRING	read-create	Ascii string of an option.
I32 hpnicfDHCPSrvGlbPoolOptCode	1.3.6.1.4.1.11.2.14.11.15.2.101.2.5.1.1	Integer32	read-only	Option code.
OCT hpnicfDHCPSrvGlbPoolOptHexString	1.3.6.1.4.1.11.2.14.11.15.2.101.2.5.1.4	OCTET STRING	read-create	Hex string of an option. 1st to 16th hex strings, which are 2 bytes, 4 bytes, 6 bytes or 8 bytes, can be configured at most simultaneously. That means the format of each string must be '12', '1234', '123456' or '12345678'.
OCT hpnicfDHCPSrvGlbPoolOptIPString	1.3.6.1.4.1.11.2.14.11.15.2.101.2.5.1.5	OCTET STRING	read-create	IP string of an option. 1 to 8 ip addresses can be configured at most simultaneously.
ROW hpnicfDHCPSrvGlbPoolOptRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.101.2.5.1.6	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy.
INT hpnicfDHCPSrvGlbPoolOptType	1.3.6.1.4.1.11.2.14.11.15.2.101.2.5.1.2	INTEGER	read-create	Option type.
INT hpnicfDHCPSrvGlbPoolParaUndoFlag	1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1.13	INTEGER	read-write	Flag of undo-operation for hpnicfDHCPSrvGlobalPoolParaTable.
IP hpnicfDHCPSrvGlbPoolPrimaryDNSIP	1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1.16	IpAddress	read-write	The Primary DNS server IP address to be assigned to the client. To delete a configured Primary DNS server IP, please set hpnicfDHCPSrvGlbPoolPrimaryDNSIP to 0. It takes effect only when hpnicfDHCPSrvGlobalPoolNetwork is set.
C32 hpnicfDHCPSrvGlbPoolReqTimes	1.3.6.1.4.1.11.2.14.11.15.2.101.2.6.1.2	Counter32	read-only	Number of request packets received by each DHCP address pool, including the request packets for an extension of the lease.
IP hpnicfDHCPSrvGlbPoolSecondaryDNSIP	1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1.17	IpAddress	read-write	The Secondary DNS server IP address to be assigned to the client. To delete a configured Secondary DNS server IP, please set hpnicfDHCPSrvGlbPoolSecondaryDNSIP to 0. It takes effect only when hpnicfDHCPSrvGlobalPoolNetwork is set.
C32 hpnicfDHCPSrvGlbPoolSuccessTimes	1.3.6.1.4.1.11.2.14.11.15.2.101.2.6.1.3	Counter32	read-only	Number of positive responses sent by each DHCP address pool, including responses to the request for an extension of the lease.
C32 hpnicfDHCPSrvGlbPoolTotalIpNum	1.3.6.1.4.1.11.2.14.11.15.2.101.2.6.1.7	Counter32	read-only	Number of IP addresses in each DHCP address pool.
INT hpnicfDHCPSrvGlobalPoolCfgUndoFlag	1.3.6.1.4.1.11.2.14.11.15.2.101.2.3.1.7	INTEGER	read-write	Flag of undo operation for hpnicfDHCPSrvGlobalPoolConfigTable.
hpnicfDHCPSrvGlobalPoolConfigEntry	1.3.6.1.4.1.11.2.14.11.15.2.101.2.3.1		not-accessible	An entry containing the objects for configuring the network ip or host ip etc. to global pools for DHCP server.
hpnicfDHCPSrvGlobalPoolConfigTable	1.3.6.1.4.1.11.2.14.11.15.2.101.2.3		not-accessible	A table containing the configurations of dhcp server global pools.
IP hpnicfDHCPSrvGlobalPoolEndAddr	1.3.6.1.4.1.11.2.14.11.15.2.101.2.3.1.9	IpAddress	read-write	End ip of a DHCP global pool.
hpnicfDHCPSrvGlobalPoolEntry	1.3.6.1.4.1.11.2.14.11.15.2.101.2.2.1		not-accessible	An entry containing objects for creating or deleting a global pool for the DHCP server.
MAC hpnicfDHCPSrvGlobalPoolHostHAddr	1.3.6.1.4.1.11.2.14.11.15.2.101.2.3.1.6	MacAddress	read-write	Hardware address of a DHCP global pool(host). To delete a configured hardware address, please set hpnicfDHCPSrvGlobalPoolCfgUndoFlag to 3.
IP hpnicfDHCPSrvGlobalPoolHostIPAddr	1.3.6.1.4.1.11.2.14.11.15.2.101.2.3.1.4	IpAddress	read-write	Host ip of a DHCP global pool. To delete a configured network ip, please set hpnicfDHCPSrvGlobalPoolCfgUndoFlag to 2.
IP hpnicfDHCPSrvGlobalPoolHostMask	1.3.6.1.4.1.11.2.14.11.15.2.101.2.3.1.5	IpAddress	read-write	Net mask of a DHCP global pool(host) The SET operation to this object ought to be with the SET of hpnicfDHCPSrvGlobalPoolHostIPAddr together, and any SET operation alone to this object will be regarded as an invalid operation. When a host ip of a DHCP global pool was deleted, the net mask would also be deleted automatically, and no further operation needed.
OCT hpnicfDHCPSrvGlobalPoolName	1.3.6.1.4.1.11.2.14.11.15.2.101.2.2.1.1	OCTET STRING	read-only	DHCP server global pool name.
IP hpnicfDHCPSrvGlobalPoolNetwork	1.3.6.1.4.1.11.2.14.11.15.2.101.2.3.1.2	IpAddress	read-write	Network ip of a DHCP global pool. To delete a configured network ip, please set hpnicfDHCPSrvGlobalPoolCfgUndoFlag to 1.
IP hpnicfDHCPSrvGlobalPoolNetworkMask	1.3.6.1.4.1.11.2.14.11.15.2.101.2.3.1.3	IpAddress	read-write	Net mask of a DHCP global pool(network). The SET operation to this object ought to be with the SET of hpnicfDHCPSrvGlobalPoolNetwork together, and any SET operation alone to this object will be regarded as an invalid operation. When a network ip of a DHCP global pool was deleted, the net mask would also be deleted automatically, and no further operation needed.
hpnicfDHCPSrvGlobalPoolOptionEntry	1.3.6.1.4.1.11.2.14.11.15.2.101.2.5.1		not-accessible	An entry containing the objects for configuring options to DHCP global pools.
hpnicfDHCPSrvGlobalPoolOptionTable	1.3.6.1.4.1.11.2.14.11.15.2.101.2.5		not-accessible	A table for configuring options to DHCP global pools.
hpnicfDHCPSrvGlobalPoolParaEntry	1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1		not-accessible	An entry containing the objects for the configurations of parameters of DHCP global pools.
hpnicfDHCPSrvGlobalPoolParaTable	1.3.6.1.4.1.11.2.14.11.15.2.101.2.4		not-accessible	A table for configuring parameters to DHCP global pools.
ROW hpnicfDHCPSrvGlobalPoolRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.101.2.2.1.2	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy.
IP hpnicfDHCPSrvGlobalPoolStartAddr	1.3.6.1.4.1.11.2.14.11.15.2.101.2.3.1.8	IpAddress	read-write	Start IP of a DHCP global pool. To delete a configured start IP, please set hpnicfDHCPSrvGlobalPoolStartAddr to 0. It takes effect only when hpnicfDHCPSrvGlobalPoolNetwork is set.
hpnicfDHCPSrvGlobalPoolStatEntry	1.3.6.1.4.1.11.2.14.11.15.2.101.2.6.1		not-accessible	An entry containing the statistics of each DHCP address pool.
hpnicfDHCPSrvGlobalPoolStatTable	1.3.6.1.4.1.11.2.14.11.15.2.101.2.6		not-accessible	The statistics of each DHCP address pool.
hpnicfDHCPSrvGlobalPoolTable	1.3.6.1.4.1.11.2.14.11.15.2.101.2.2		not-accessible	A table for creating DHCP server global pools.
INT hpnicfDHCPSrvGlobalPoolType	1.3.6.1.4.1.11.2.14.11.15.2.101.2.3.1.1	INTEGER	read-write	Type of a DHCP global pool. Any operations of this object will be bound with the operations of hpnicfDHCPSrvGlobalPoolNetwork, hpnicfDHCPSrvGlobalPoolHostIPAddr, or hpnicfDHCPSrvGlobalPoolHostHAddr. That means any operation of this object alone will be regarded as invalid operation.
OCT hpnicfDHCPSvrOptionAsciiString	1.3.6.1.4.1.11.2.14.11.15.2.101.2.8.1.3	OCTET STRING	read-create	Ascii string of an option.
I32 hpnicfDHCPSvrOptionCode	1.3.6.1.4.1.11.2.14.11.15.2.101.2.8.1.1	Integer32	read-only	Option code.
hpnicfDHCPSvrOptionEntry	1.3.6.1.4.1.11.2.14.11.15.2.101.2.8.1		not-accessible	An entry containing objects for configuring an option in a global option group.
hpnicfDHCPSvrOptionGroupEntry	1.3.6.1.4.1.11.2.14.11.15.2.101.2.7.1		not-accessible	An entry containing objects for creating or deleting a global option group.
I32 hpnicfDHCPSvrOptionGroupIndex	1.3.6.1.4.1.11.2.14.11.15.2.101.2.7.1.1	Integer32	read-only	The global option group index.
ROW hpnicfDHCPSvrOptionGroupRowstatus	1.3.6.1.4.1.11.2.14.11.15.2.101.2.7.1.2	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy.
hpnicfDHCPSvrOptionGroupTable	1.3.6.1.4.1.11.2.14.11.15.2.101.2.7		not-accessible	A table for creating DHCP server global option groups.
OCT hpnicfDHCPSvrOptionHexString	1.3.6.1.4.1.11.2.14.11.15.2.101.2.8.1.4	OCTET STRING	read-create	Hex string of an option. 1 to 16 hex strings, which are 2 bytes, 4 bytes, 6 bytes or 8 bytes, can be configured at most simultaneously. That means the format of each string must be '12', '1234', '123456' or '12345678'.
OCT hpnicfDHCPSvrOptionIPString	1.3.6.1.4.1.11.2.14.11.15.2.101.2.8.1.5	OCTET STRING	read-create	Ip string of an option. 1 to 8 ip addresses can be configured at most simultaneously.
ROW hpnicfDHCPSvrOptionRowstatus	1.3.6.1.4.1.11.2.14.11.15.2.101.2.8.1.6	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy.
hpnicfDHCPSvrOptionTable	1.3.6.1.4.1.11.2.14.11.15.2.101.2.8		not-accessible	A table for configuring options in a global option group.
INT hpnicfDHCPSvrOptionType	1.3.6.1.4.1.11.2.14.11.15.2.101.2.8.1.2	INTEGER	read-create	Option type.
MAC hpnicfDHCPSvrPoolMac	1.3.6.1.4.1.11.2.14.11.15.2.101.2.10.1.1	MacAddress	read-only	MAC address.
hpnicfDHCPSvrPoolMacEntry	1.3.6.1.4.1.11.2.14.11.15.2.101.2.10.1		not-accessible	An entry containing a MAC address and a mask.
MAC hpnicfDHCPSvrPoolMacMask	1.3.6.1.4.1.11.2.14.11.15.2.101.2.10.1.2	MacAddress	read-only	Mask for MAC address.
I32 hpnicfDHCPSvrPoolMacOptIndex	1.3.6.1.4.1.11.2.14.11.15.2.101.2.10.1.3	Integer32	read-write	Option group index binding for the MAC address.
ROW hpnicfDHCPSvrPoolMacRowstatus	1.3.6.1.4.1.11.2.14.11.15.2.101.2.10.1.4	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy.
hpnicfDHCPSvrPoolMacTable	1.3.6.1.4.1.11.2.14.11.15.2.101.2.10		not-accessible	A table containing the MAC addresses list for pools.
hpnicfDHCPSvrVerifyMacEntry	1.3.6.1.4.1.11.2.14.11.15.2.101.2.9.1		not-accessible	An entry containing the switch status for a pool.
INT hpnicfDHCPSvrVerifyMacSwitch	1.3.6.1.4.1.11.2.14.11.15.2.101.2.9.1.1	INTEGER	read-write	The switch status for this pool. It has two defined values: enabled and disabled. If the value is enabled, the DHCP server only allocates IP address to host in the MAC list. The default value is disabled.
hpnicfDHCPSvrVerifyMacTable	1.3.6.1.4.1.11.2.14.11.15.2.101.2.9		not-accessible	A table containing the verifying switches status for pools.

RFC description

Manages DHCP server configuration, pools, options, and statistics for HP ICF devices.

Start monitoring HP networking switch/router with onboard DHCP server with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-DHCP-SERVER-MIB