All MIBs › BLADETYPE5-NETWORK-MIB › lacpNewPortState
lacpNewPortState
Module: BLADETYPE5-NETWORK-MIB
OID (symbolic): BLADETYPE5-NETWORK-MIB::lacpNewPortState
OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.8.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: LACP port state can be one of three states off (Not participating in LACP) Active (Initiates LACPDU updates) Passive (Does not initiate LACPDU updates but responds to peer.
What is lacpNewPortState?
Configures the pending LACP participation state for a port, choosing between off, active (initiates LACPDUs), or passive (responds only) modes. This setting takes effect after the configuration is applied.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.8.1.2 snmpwalk -v2c -c public <target> BLADETYPE5-NETWORK-MIB::lacpNewPortState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.8.1.2.1 snmpget -v2c -c public <target> BLADETYPE5-NETWORK-MIB::lacpNewPortState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.8.1.2.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> lacpNewPortState.1
Start monitoring HP BladeSystem Type 5 embedded blade switch modules with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BLADETYPE5-NETWORK-MIB::lacpNewPortState OID value, configure state conditions and alerts, and monitor any HP BladeSystem Type 5 embedded blade switch modules from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.7 | netElement | HP-ICF |
| 1.3.6.1.4.1.11.2.3.7.11 | hpEtherSwitch | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.3.7.11.33 | hpSwitchProliant | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.3.7.11.33.5 | hpSwitchModuleBladetype5 | HP-SWITCH-PL-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.5.2 | hpSwitchBladeType5_Mgmt | HP-SWITCH-PL-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.33.5.2.2 | layer2 | BLADETYPE5-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1 | layer2Configs | BLADETYPE5-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6 | lacp | BLADETYPE5-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.8 | lacpNewPortCfgTable | BLADETYPE5-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.8.1 | lacpNewPortCfgTableEntry | BLADETYPE5-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.8.1.2 | lacpNewPortState | BLADETYPE5-NETWORK-MIB |