All MIBs › ALCATEL-IND1-TIMETRA-QOS-MIB › tAtmTdpShaping
tAtmTdpShaping
Module: ALCATEL-IND1-TIMETRA-QOS-MIB
OID (symbolic): ALCATEL-IND1-TIMETRA-QOS-MIB::tAtmTdpShaping
OID (numeric): 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-create
Description:
tAtmTdpShaping determines whether egress shaping should occur. The default tAtmTdpShaping is determined by the Service Category. The following default applies for tAtmTdpShaping depending upon a given service category:
Applicable Service Category Default Shaping Value UBR disabled CBR enabled RT-VBR enabled NRT-VBR enabled
For a Service Category of UBR, tAtmTdpShaping cannot be enabled.
For CBR and RT-VBR service cateories disabling shaping is MDA-dependent.
Shaping is only applied in the egress direction.
What is tAtmTdpShaping?
Controls whether egress traffic shaping is applied to an ATM traffic descriptor profile. The default shaping behavior depends on the ATM service category (e.g., CBR, VBR, UBR).
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.6527 | timetra | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| 1.3.6.1.4.1.6527.3 | timetraProducts | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| 1.3.6.1.4.1.6527.3.1 | tmnxSRMIB | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| 1.3.6.1.4.1.6527.3.1.2 | tmnxSRObjs | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| 1.3.6.1.4.1.6527.3.1.2.16 | tQosObjects | ALCATEL-IND1-TIMETRA-QOS-MIB |
| 1.3.6.1.4.1.6527.3.1.2.16.21 | tAtmTdpObjects | ALCATEL-IND1-TIMETRA-QOS-MIB |
| 1.3.6.1.4.1.6527.3.1.2.16.21.1 | tAtmTdpTable | ALCATEL-IND1-TIMETRA-QOS-MIB |
| 1.3.6.1.4.1.6527.3.1.2.16.21.1.1 | tAtmTdpEntry | ALCATEL-IND1-TIMETRA-QOS-MIB |
| 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.6 | tAtmTdpShaping | ALCATEL-IND1-TIMETRA-QOS-MIB |