34 modules from Radlan
Radlan's MIBs in this database aren't a single end-user product line but an embedded switch-software stack (later absorbed into Marvell) that many OEM switch vendors licensed and rebranded, so its RADLAN-* modules turn up inside D-Link, Netgear, and other vendors' managed switches. The corpus covers switch-software internals: Layer 2 bridging/STP extensions, VLAN aggregation and GVRP, LACP trunking, an integrated DoS/attack-mitigation security suite, embedded-web and Telnet/CLI management access, SSL certificate generation for HTTPS management, and even legacy SNA bridging and BGP/OSPFv3 routing extensions. Come to this page if you're troubleshooting a switch that turns out to be Radlan/Marvell silicon under another brand's label and you need the underlying rl*-prefixed objects the vendor's own MIB doesn't document. Because the same Radlan software stack ships under many different brand names, match the MIB to the actual firmware/silicon generation rather than assuming it lines up with the switch's outward brand.
| Module | Description |
|---|---|
| RADLAN-3SW2SWTABLES-MIB | Manages switching tables shared between layer-2 and layer-3 forwarding on Marvell-based switches. |
| RADLAN-AGGREGATEVLAN-MIB | Manages aggregate (super) VLAN configuration for subscriber aggregation on Marvell switches. |
| RADLAN-ARPSPOOFING-MIB | Configures dynamic ARP inspection to prevent ARP spoofing attacks on Marvell switch ports. |
| RADLAN-BOOTP-MIB | Configures BOOTP relay agent settings for forwarding BOOTP requests across VLANs. |
| RADLAN-BRGMACSWITCH-MIB | Manages MAC address switching and bridge forwarding tables on Marvell switch hardware. |
| RADLAN-BRIDGEMIBOBJECTS-MIB | Extends standard IEEE 802.1D bridge MIB objects with Marvell-specific bridge parameters. |
| RADLAN-CDB-MIB | Manages the configuration database including save, restore, and factory-reset operations. |
| RADLAN-CLI-MIB | Manages command-line interface access parameters and privilege levels on Marvell switches. |
| RADLAN-DEVICEPARAMS-MIB | Manages global device parameters including system mode and operational constraints. |
| RADLAN-DHCPCL-MIB | Manages DHCP client configuration and lease status on Marvell switch management interfaces. |
| RADLAN-DIGITALKEYMANAGE-MIB | Manages digital certificates and cryptographic keys for secure communications on Marvell switches. |
| RADLAN-DOT1X-MIB | Manages IEEE 802.1X port-based network access control authentication on Marvell switches. |
| RADLAN-ENDOFMIB-MIB | Provides an end-of-MIB marker object used as a sentinel in Marvell switch MIB compilations. |
| RADLAN-GMRP-MIB | Configures GARP Multicast Registration Protocol for dynamic multicast group membership propagation. |
| RADLAN-GVRP-MIB | Configures GARP VLAN Registration Protocol for dynamic VLAN membership distribution across switches. |
| RADLAN-HWENVIROMENT | Monitors hardware environment sensors including temperature, fan speed, and voltage thresholds. |
| RADLAN-IP | Manages IP interface configuration and routing parameters on Radlan/Marvell switch platforms. |
| RADLAN-JUMBOFRAMES-MIB | Configures jumbo frame MTU size support on Marvell switch interfaces. |
| RADLAN-LLDP-MIB | Manages Link Layer Discovery Protocol configuration and neighbor information on Marvell switches. |
| RADLAN-MIR-MIB | Configures port mirroring sessions for network traffic monitoring and analysis. |
| RADLAN-MULTISESSIONTERMINAL-MIB | Configures multi-session terminal access parameters for concurrent management sessions. |
| RADLAN-OSPF-LSDB-MIB | Provides access to the OSPF link-state database for topology and LSA inspection. |
| RADLAN-OSPF-MIB | Extends OSPF routing protocol configuration and neighbor state monitoring on Radlan switches. |
| RADLAN-QOS-SERV | Configures QoS service policies for traffic scheduling and bandwidth management. |
| RADLAN-RCLI-MIB | Manages remote CLI access configuration and session parameters on Marvell switches. |
| RADLAN-rndApplications | Manages application-level service settings and protocol configurations on Radlan devices. |
| RADLAN-rndMng IPNM ✓ | RADLAN private MIB providing management and action objects for RND/RADLAN network device administration and configuration. |
| RADLAN-SMON-MIB | Manages switch monitoring (SMON) for per-port and per-VLAN traffic sampling and statistics. |
| RADLAN-SOCKET-MIB | Monitors TCP/UDP socket usage and connection state statistics on Radlan platforms. |
| RADLAN-STORMCTRL-MIB | Configures broadcast, multicast, and unknown-unicast storm control thresholds per port. |
| RADLAN-SWPACKAGEVERSION-MIB | Tracks installed software package versions and firmware image metadata on Marvell switches. |
| RADLAN-TELNET-MIB | Configures Telnet server access parameters including port, timeout, and session limits. |
| RADLAN-TRACEROUTE-MIB | Provides traceroute diagnostic capability for path discovery and hop latency measurement. |
| RADLAN-Tuning | Adjusts performance tuning parameters for forwarding, buffering, and scheduling on Marvell ASICs. |