RADLAN-OSPF-LSDB-MIB

All MIBs › RADLAN-OSPF-LSDB-MIB

Organization: Radlan Computer Communications Ltd.

Last Updated: 2011-05-04

Category: Routing, Vendor: RADLAN/Cisco SB

Description: Provides access to the OSPF link-state database for topology and LSA inspection.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RADLAN-OSPF-LSDB-MIB?

RADLAN-OSPF-LSDB-MIB is a vendor-specific private MIB from RADLAN/Marvell that gives read access into a device's OSPF Link-State Database, exposing the raw Link-State Advertisements a router has learned. It defines tables such as rlOspfRouterLsaTable/Entry with fields for process ID, area ID, link-state ID, originating router ID, sequence number, age, checksum, and length. This is primarily a software/protocol-state monitoring tool: it lets an operator verify OSPF topology convergence, confirm an LSA hasn't gone stale (via rlOspfRouterLsaAge) or become corrupted (via a checksum mismatch), and detect routers missing from the expected topology. It extends and depends on the standard OSPF protocol and the concepts defined in the standard OSPF-MIB, providing vendor-specific detail beyond it. It is typically deployed on Marvell/RADLAN-based Layer 3 switches or routers running OSPF within an enterprise or service-provider network. Engineers can download the RADLAN-OSPF-LSDB-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in RADLAN-OSPF-LSDB-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Marvell (formerly RADLAN) Layer 3 switches/routers

Monitoring Examples

An administrator would walk rlOspfRouterLsaTable, keyed by rlOspfRouterLsaProcessId, rlOspfRouterLsaAreaId, and rlOspfRouterLsaLsid, to inspect rlOspfRouterLsaAge and rlOspfRouterLsaSequence for a given rlOspfRouterLsaRouterId, spotting an LSA that is aging toward MaxAge without being refreshed, which signals a router that has dropped out of the OSPF topology. rlOspfRouterLsaChecksum can also be compared to detect corrupted or stale link-state data.

What Can Be Monitored

OSPF LSA age
OSPF LSA sequence number
OSPF LSA checksum
originating router ID per LSA
OSPF area and process ID

Imported Objects

From OSPF-MIB

AreaID
RouterID

From RADLAN-MIB

rnd	OBJECT-IDENTITY

From RADLAN-OSPF-MIB

RlOspfProcessID
rlOspf	MODULE-IDENTITY
rlOspfIfEntry	OBJECT-TYPE
rlOspfVirtIfEntry	OBJECT-TYPE

From RFC1213-MIB

mib-2

From SNMPv2-SMI

Counter32
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
rlOspfLsdb	1.3.6.1.4.1.89.221			The private MIB module definition for OSPF LSA Database MIB.
rlOspfRouterLsaTable	1.3.6.1.4.1.89.221.1		not-accessible	Router Link State Advertisement.
rlOspfRouterLsaEntry	1.3.6.1.4.1.89.221.1.1		not-accessible	A single entry from Router LSA.
RLO rlOspfRouterLsaProcessId	1.3.6.1.4.1.89.221.1.1.1	RlOspfProcessID	read-only	A 32-bit integer uniquely identifying an OSPF process.
ARE rlOspfRouterLsaAreaId	1.3.6.1.4.1.89.221.1.1.2	AreaID	read-only	The 32 bit identifier of the Area from which the LSA was received.
IP rlOspfRouterLsaLsid	1.3.6.1.4.1.89.221.1.1.3	IpAddress	read-only	The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
ROU rlOspfRouterLsaRouterId	1.3.6.1.4.1.89.221.1.1.4	RouterID	read-only	The 32 bit number that uniquely identifies the originating router in the Autonomous System.
U32 rlOspfRouterLsaIdx	1.3.6.1.4.1.89.221.1.1.5	Unsigned32	read-only	The index is a unsigned 32-bit integer. It is used as sequence number of entry in the LSA and relevant only for Router or Network LSA which can contain unlimited number of entries.
I32 rlOspfRouterLsaSequence	1.3.6.1.4.1.89.221.1.1.6	Integer32	read-only	The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
I32 rlOspfRouterLsaAge	1.3.6.1.4.1.89.221.1.1.7	Integer32	read-only	This field is the age of the link state advertisement in seconds.
I32 rlOspfRouterLsaChecksum	1.3.6.1.4.1.89.221.1.1.8	Integer32	read-only	This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
U32 rlOspfRouterLsaLength	1.3.6.1.4.1.89.221.1.1.9	Unsigned32	read-only	The lenth in bytes of the LSA. This includes the 20 byte LSA header.
INT rlOspfRouterLsaBitV	1.3.6.1.4.1.89.221.1.1.10	INTEGER	read-only	When set, the router is an endpoint of one or more fully adjacent virtual links having the described area as Transit area (V is for virtual link endpoint).
INT rlOspfRouterLsaBitE	1.3.6.1.4.1.89.221.1.1.11	INTEGER	read-only	When set, the router is an AS boundary router (E is for external).
INT rlOspfRouterLsaBitB	1.3.6.1.4.1.89.221.1.1.12	INTEGER	read-only	When set, the router is an area border router (B is for border).
U32 rlOspfRouterLsaLinks	1.3.6.1.4.1.89.221.1.1.13	Unsigned32	read-only	The number of router links described in this LSA. This must be the total collection of router links (i.e., interfaces) to the area.
IP rlOspfRouterLsaLinkID	1.3.6.1.4.1.89.221.1.1.14	IpAddress	read-only	Identifies the object that this router link connects to. Value depends on the link's Type.
IP rlOspfRouterLsaLinkData	1.3.6.1.4.1.89.221.1.1.15	IpAddress	read-only	Value depends on the link's Type field.
INT rlOspfRouterLsaType	1.3.6.1.4.1.89.221.1.1.16	INTEGER	read-only	A quick description of the router link.
U32 rlOspfRouterLsaMetric	1.3.6.1.4.1.89.221.1.1.17	Unsigned32	read-only	The cost of using this router link.
rlOspfNetworkLsaTable	1.3.6.1.4.1.89.221.2		not-accessible	Network Link State Advertisement.
rlOspfNetworkLsaEntry	1.3.6.1.4.1.89.221.2.1		not-accessible	A single entry from Network LSA.
RLO rlOspfNetworkLsaProcessId	1.3.6.1.4.1.89.221.2.1.1	RlOspfProcessID	read-only	A 32-bit integer uniquely identifying an OSPF process.
ARE rlOspfNetworkLsaAreaId	1.3.6.1.4.1.89.221.2.1.2	AreaID	read-only	The 32 bit identifier of the Area from which the LSA was received.
IP rlOspfNetworkLsaLsid	1.3.6.1.4.1.89.221.2.1.3	IpAddress	read-only	The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
ROU rlOspfNetworkLsaRouterId	1.3.6.1.4.1.89.221.2.1.4	RouterID	read-only	The 32 bit number that uniquely identifies the originating router in the Autonomous System.
U32 rlOspfNetworkLsaIdx	1.3.6.1.4.1.89.221.2.1.5	Unsigned32	read-only	The index is a unsigned 32-bit integer. It is used as sequence number of entry in the LSA and relevant only for Router or Network LSA which can contain unlimited number of entries.
I32 rlOspfNetworkLsaSequence	1.3.6.1.4.1.89.221.2.1.6	Integer32	read-only	The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
I32 rlOspfNetworkLsaAge	1.3.6.1.4.1.89.221.2.1.7	Integer32	read-only	This field is the age of the link state advertisement in seconds.
I32 rlOspfNetworkLsaChecksum	1.3.6.1.4.1.89.221.2.1.8	Integer32	read-only	This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
U32 rlOspfNetworkLsaLength	1.3.6.1.4.1.89.221.2.1.9	Unsigned32	read-only	The lenth in bytes of the LSA. This includes the 20 byte LSA header.
IP rlOspfNetworkLsaMask	1.3.6.1.4.1.89.221.2.1.10	IpAddress	read-only	The IP address mask for the network.
IP rlOspfNetworkLsaAttRouter	1.3.6.1.4.1.89.221.2.1.11	IpAddress	read-only	The Router IDs of each of the routers attached to the network.
rlOspfSummaryType3LsaTable	1.3.6.1.4.1.89.221.3		not-accessible	Summary Link State Advertisement for network (Type 3).
rlOspfSummaryType3LsaEntry	1.3.6.1.4.1.89.221.3.1		not-accessible	A single entry from Summary LSA.
RLO rlOspfSummaryType3LsaProcessId	1.3.6.1.4.1.89.221.3.1.1	RlOspfProcessID	read-only	A 32-bit integer uniquely identifying an OSPF process.
ARE rlOspfSummaryType3LsaAreaId	1.3.6.1.4.1.89.221.3.1.2	AreaID	read-only	The 32 bit identifier of the Area from which the LSA was received.
IP rlOspfSummaryType3LsaLsid	1.3.6.1.4.1.89.221.3.1.3	IpAddress	read-only	The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
ROU rlOspfSummaryType3LsaRouterId	1.3.6.1.4.1.89.221.3.1.4	RouterID	read-only	The 32 bit number that uniquely identifies the originating router in the Autonomous System.
I32 rlOspfSummaryType3LsaSequence	1.3.6.1.4.1.89.221.3.1.5	Integer32	read-only	The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
I32 rlOspfSummaryType3LsaAge	1.3.6.1.4.1.89.221.3.1.6	Integer32	read-only	This field is the age of the link state advertisement in seconds.
I32 rlOspfSummaryType3LsaChecksum	1.3.6.1.4.1.89.221.3.1.7	Integer32	read-only	This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
U32 rlOspfSummaryType3LsaLength	1.3.6.1.4.1.89.221.3.1.8	Unsigned32	read-only	The lenth in bytes of the LSA. This includes the 20 byte LSA header.
IP rlOspfSummaryType3LsaMask	1.3.6.1.4.1.89.221.3.1.9	IpAddress	read-only	Value depends on the link's Type field.
U32 rlOspfSummaryType3LsaMetric	1.3.6.1.4.1.89.221.3.1.10	Unsigned32	read-only	The cost of using this router link.
rlOspfSummaryType4LsaTable	1.3.6.1.4.1.89.221.4		not-accessible	Summary Link State Advertisement for ASBR (Type 4).
rlOspfSummaryType4LsaEntry	1.3.6.1.4.1.89.221.4.1		not-accessible	A single entry from Summary LSA.
RLO rlOspfSummaryType4LsaProcessId	1.3.6.1.4.1.89.221.4.1.1	RlOspfProcessID	read-only	A 32-bit integer uniquely identifying an OSPF process.
ARE rlOspfSummaryType4LsaAreaId	1.3.6.1.4.1.89.221.4.1.2	AreaID	read-only	The 32 bit identifier of the Area from which the LSA was received.
IP rlOspfSummaryType4LsaLsid	1.3.6.1.4.1.89.221.4.1.3	IpAddress	read-only	The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
ROU rlOspfSummaryType4LsaRouterId	1.3.6.1.4.1.89.221.4.1.4	RouterID	read-only	The 32 bit number that uniquely identifies the originating router in the Autonomous System.
I32 rlOspfSummaryType4LsaSequence	1.3.6.1.4.1.89.221.4.1.5	Integer32	read-only	The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
I32 rlOspfSummaryType4LsaAge	1.3.6.1.4.1.89.221.4.1.6	Integer32	read-only	This field is the age of the link state advertisement in seconds.
I32 rlOspfSummaryType4LsaChecksum	1.3.6.1.4.1.89.221.4.1.7	Integer32	read-only	This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
U32 rlOspfSummaryType4LsaLength	1.3.6.1.4.1.89.221.4.1.8	Unsigned32	read-only	The lenth in bytes of the LSA. This includes the 20 byte LSA header.
U32 rlOspfSummaryType4LsaMetric	1.3.6.1.4.1.89.221.4.1.9	Unsigned32	read-only	The cost of using this router link.
rlOspfExternalLsaTable	1.3.6.1.4.1.89.221.5		not-accessible	External Link State Advertisement.
rlOspfExternalLsaEntry	1.3.6.1.4.1.89.221.5.1		not-accessible	A single entry from External LSA.
RLO rlOspfExternalLsaProcessId	1.3.6.1.4.1.89.221.5.1.1	RlOspfProcessID	read-only	A 32-bit integer uniquely identifying an OSPF process.
IP rlOspfExternalLsaLsid	1.3.6.1.4.1.89.221.5.1.2	IpAddress	read-only	The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
ROU rlOspfExternalLsaRouterId	1.3.6.1.4.1.89.221.5.1.3	RouterID	read-only	The 32 bit number that uniquely identifies the originating router in the Autonomous System.
I32 rlOspfExternalLsaSequence	1.3.6.1.4.1.89.221.5.1.4	Integer32	read-only	The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
I32 rlOspfExternalLsaAge	1.3.6.1.4.1.89.221.5.1.5	Integer32	read-only	This field is the age of the link state advertisement in seconds.
I32 rlOspfExternalLsaChecksum	1.3.6.1.4.1.89.221.5.1.6	Integer32	read-only	This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
U32 rlOspfExternalLsaLength	1.3.6.1.4.1.89.221.5.1.7	Unsigned32	read-only	The lenth in bytes of the LSA. This includes the 20 byte LSA header.
IP rlOspfExternalLsaMask	1.3.6.1.4.1.89.221.5.1.8	IpAddress	read-only	Value depends on the link's Type field.
IP rlOspfExternalLsaFrwAddress	1.3.6.1.4.1.89.221.5.1.9	IpAddress	read-only	Data traffic for the advertised destination will be forwarded to this address. If the Forwarding address is set to 0.0.0.0, data traffic will be forwarded instead to the LSA's originator (i.e., the responsible AS boundary router).
INT rlOspfExternalLsaBitE	1.3.6.1.4.1.89.221.5.1.10	INTEGER	read-only	The type of external metric. If bit E is set, the metric specified is a Type 2 external metric.
U32 rlOspfExternalLsaMetric	1.3.6.1.4.1.89.221.5.1.11	Unsigned32	read-only	The cost of this route.
U32 rlOspfExternalLsaTag	1.3.6.1.4.1.89.221.5.1.12	Unsigned32	read-only	A 32-bit field attached to each external route.

RFC description

Radcom/Radlan vendor-private MIB for extended OSPF Link State Database (LSDB) monitoring and management.

Start monitoring Marvell (RADLAN) Layer 3 switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RADLAN-OSPF-LSDB-MIB

What Is RADLAN-OSPF-LSDB-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description