RADLAN-QOS-SERV

All MIBs › RADLAN-QOS-SERV

Organization: Radlan Computer Communication Ltd.

Last Updated: 2006-02-12

Category: QoS and Traffic Management, Vendor: RADLAN/Cisco SB

Description: Configures QoS service policies for traffic scheduling and bandwidth management.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RADLAN-QOS-SERV?

RADLAN-QOS-SERV is a Marvell/RADLAN private enterprise MIB that configures QoS traffic-classification templates on RADLAN-based switches, used to identify specific traffic flows for prioritization or policing. It exposes a service template table where each entry matches traffic by destination/source MAC (with masks), VLAN, and destination/source IP (with masks). This is a configuration MIB rather than a live-status MIB: it lets an admin verify which traffic-matching templates are defined and applied, important for confirming voice, video, or critical application traffic is correctly classified for priority queuing rather than reporting hardware faults. It has no apparent dependency on other standard MIBs, being self-contained, though it parallels the general classification model of the IETF DIFFSERV-MIB. It is typically deployed on RADLAN-based access/aggregation switches prioritizing traffic such as VoIP or video conferencing over best-effort data. Engineers can download the RADLAN-QOS-SERV file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in RADLAN-QOS-SERV. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Marvell/RADLAN-based managed Ethernet switch
OEM switches licensing the RADLAN software stack

Monitoring Examples

An administrator troubleshooting why VoIP traffic isn't getting priority would inspect rlQosServTemplateTable/rlQosServTemplateEntry for the relevant rlQosServTemplateIndex, checking rlQosServTemplateDestIp/rlQosServTemplateDestIpMask and rlQosServTemplateVlan to confirm the matching criteria actually cover the phone traffic's subnet and VLAN. A rlQosServTemplateSrcMacMask or rlQosServTemplateDestMacMask that is too broad or too narrow explains traffic being mis-classified into the wrong queue. This MIB is read to audit classification rules, not to monitor traffic volumes.

What Can Be Monitored

QoS traffic classification templates
destination/source MAC match criteria
destination/source IP match criteria
VLAN match criteria

Imported Objects

From IF-MIB

InterfaceIndex

From Q-BRIDGE-MIB

PortList

From RADLAN-MIB

rnd	OBJECT-IDENTITY

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
rlQosServ	1.3.6.1.4.1.89.99			The MIB module describes the private MIB for QOS service mode.
IP rlQosServFceDestIp	1.3.6.1.4.1.89.99.3.1.10	IpAddress	read-create	Indicates the destination Ip address to compare with.
IP rlQosServFceDestIpMask	1.3.6.1.4.1.89.99.3.1.11	IpAddress	read-create	Indicates the destination Ip address mask to compare. It may specify any byte (not bit), designated by 0.
MAC rlQosServFceDestMac	1.3.6.1.4.1.89.99.3.1.4	MacAddress	read-create	Indicates the destination Mac address to compare with.
MAC rlQosServFceDestMacMask	1.3.6.1.4.1.89.99.3.1.5	MacAddress	read-create	Indicates the destination Mac address mask to compare with. It may specify any byte (not bit), designated by 0.
INT rlQosServFceDestPort	1.3.6.1.4.1.89.99.3.1.15	INTEGER	read-create	Indicates the TCP/UDP destination port to compare with.
INT rlQosServFceDestPortMask	1.3.6.1.4.1.89.99.3.1.16	INTEGER	read-create	Indicates 16-bits TCP/UDP destination port bits to compare. It may specify any byte (not bit), designated by 0.
INT rlQosServFceDscp	1.3.6.1.4.1.89.99.3.1.19	INTEGER	read-create	Indicates the Destination Mac address to compare with.
rlQosServFceEntry	1.3.6.1.4.1.89.99.3.1		not-accessible	Each entry in this table describes one Flow Classifier Element. The information includes ACE index and a combination of all the other classifications, as depicted in the selection field. Classifiers are Mac and Ip source and destination addresses, Vlan, Ip protocol, TCP & UDP source and destination ports, Dscp and Ip precedence values. The index is a sequential integer represent by rlQosServFceIndex.
INT rlQosServFceErrorCode	1.3.6.1.4.1.89.99.3.1.2	INTEGER	read-only	Fce error code.
INT rlQosServFceEtherType	1.3.6.1.4.1.89.99.3.1.23	INTEGER	read-create	Indicate the Ether Type to compare with.
INT rlQosServFceIcmpCode	1.3.6.1.4.1.89.99.3.1.27	INTEGER	read-create	Indicates the Icmp code to compare with.
INT rlQosServFceIcmpType	1.3.6.1.4.1.89.99.3.1.26	INTEGER	read-create	Indicates the Icmp type to compare with.
INT rlQosServFceIgmpType	1.3.6.1.4.1.89.99.3.1.28	INTEGER	read-create	Indicates the Igmp type to compare with.
INT rlQosServFceIndex	1.3.6.1.4.1.89.99.3.1.1	INTEGER	not-accessible	An arbitrary incremental Index for the Fce table.
INT rlQosServFceIpPrecedence	1.3.6.1.4.1.89.99.3.1.20	INTEGER	read-create	Indicates the Ip precedence to compare with.
INT rlQosServFceIpProtocol	1.3.6.1.4.1.89.99.3.1.14	INTEGER	read-create	Indicates the Ip protocol to compare with.
BIT rlQosServFceSelection	1.3.6.1.4.1.89.99.3.1.3	Bits	read-create	Flow Classification Elements selection.
IP rlQosServFceSrcIp	1.3.6.1.4.1.89.99.3.1.12	IpAddress	read-create	Indicates the source Ip address to compare with.
IP rlQosServFceSrcIpMask	1.3.6.1.4.1.89.99.3.1.13	IpAddress	read-create	Indicates the source Ip address mask to compare. It may specify any byte (not bit), designated by 0.
MAC rlQosServFceSrcMac	1.3.6.1.4.1.89.99.3.1.6	MacAddress	read-create	Indicates the source Mac address to compare with.
MAC rlQosServFceSrcMacMask	1.3.6.1.4.1.89.99.3.1.7	MacAddress	read-create	Indicates the source Mac address mask to compare. It may specify any byte (not bit), designated by 0.
INT rlQosServFceSrcPort	1.3.6.1.4.1.89.99.3.1.17	INTEGER	read-create	Indicates the TCP/UDP source port to compare with.
INT rlQosServFceSrcPortMask	1.3.6.1.4.1.89.99.3.1.18	INTEGER	read-create	Indicates 16-bits TCP/UDP source port bits to compare. It may specify any byte (not bit), designated by 0.
ROW rlQosServFceStatus	1.3.6.1.4.1.89.99.3.1.29	RowStatus	read-create	The status of this table entry. It is used to delete/Add an entry from this table.
rlQosServFceTable	1.3.6.1.4.1.89.99.3		not-accessible	This table specifies FCE table information
INT rlQosServFceTcpFlags	1.3.6.1.4.1.89.99.3.1.24	INTEGER	read-create	Indicates the Tcp Flags field to compare with.
INT rlQosServFceTcpFlagsMask	1.3.6.1.4.1.89.99.3.1.25	INTEGER	read-create	Indicates the Tcp Flags field to compare with.
INT rlQosServFceVlan	1.3.6.1.4.1.89.99.3.1.8	INTEGER	read-create	Indicates the Vlan to compare with.
INT rlQosServFceVlanMask	1.3.6.1.4.1.89.99.3.1.9	INTEGER	read-create	Indicates 12-bits Vlan bits to compare. It may specify any byte (not bit), designated by 0.
INT rlQosServFceVpt	1.3.6.1.4.1.89.99.3.1.21	INTEGER	read-create	Indicates the VPT to compare with.
INT rlQosServFceVptMask	1.3.6.1.4.1.89.99.3.1.22	INTEGER	read-create	Indicates the VPT mask to compare with. It may specify any bit, designated by 0.
rlQosServFclEntry	1.3.6.1.4.1.89.99.2.1		not-accessible	Each entry in this table describes one Flow Classification List with It's Flow Classification Element. The information includes the FCL index and reference to a FCE index. The indices are the Fcl index represent by rlQosServFclIndex and the Fce index represent by rlQosServFclFceIndex.
INT rlQosServFclFceIndex	1.3.6.1.4.1.89.99.2.1.3	INTEGER	read-create	A reference to the FCE index.
INT rlQosServFclFcePriority	1.3.6.1.4.1.89.99.2.1.2	INTEGER	not-accessible	Priority of the FCE within the FCL.
INT rlQosServFclIndex	1.3.6.1.4.1.89.99.2.1.1	INTEGER	not-accessible	An arbitrary index for the FCL table. Value '0' is invalid.
ROW rlQosServFclStatus	1.3.6.1.4.1.89.99.2.1.4	RowStatus	read-create	The status of a table entry. It is used to delete/Add an entry from this table.
rlQosServFclTable	1.3.6.1.4.1.89.99.2		not-accessible	This table specifies FCL table information
rlQosServFreeSequentialEntry	1.3.6.1.4.1.89.99.9.1		not-accessible	The entry is used to get free index for particular table.
INT rlQosServFreeSequentialId	1.3.6.1.4.1.89.99.9.1.1	INTEGER	not-accessible	Identification of the sequential, for which free indices or priority are retrieved.
rlQosServFreeSequentialTable	1.3.6.1.4.1.89.99.9		not-accessible	The table is used to get free indices of tables to create new entries, and next free priorities. The algorithm for free indexes depends on table types: Fcl table - first free index. Fce table - first free index. Service table - first free index. Service priority - last used priority + priority-delta. The priority-delta is used to supply QoS MIB user easy new priority insert entry capabilities. Values of these deltas depend on the MIB implementation. The 'Get and Increment' approach is used in all cases.
INT rlQosServFreeSequentialValue	1.3.6.1.4.1.89.99.9.1.2	INTEGER	read-only	The free index for the table or service priority. Returned '0' means no free entries/priority.
rlQosServIndexToNameEntry	1.3.6.1.4.1.89.99.11.1		not-accessible	The entry is used to get name form particular index and table type.
INT rlQosServIndexToNameIndex	1.3.6.1.4.1.89.99.11.1.2	INTEGER	not-accessible	The index of the table. Value '0' is invalid.
rlQosServIndexToNameTable	1.3.6.1.4.1.89.99.11		not-accessible	The table is used to get specific table(s) name from indices. It is a read-write table for internal (CDB) purpose only and is not to set by outside users.
RLQ rlQosServIndexToNameTableId	1.3.6.1.4.1.89.99.11.1.1	RlQosServNamedTableId	not-accessible	Identification of the table, for which the name is retrieved.
STR rlQosServIndexToNameValue	1.3.6.1.4.1.89.99.11.1.3	DisplayString	read-write	Name of the table's entry
INT rlQosServMibAction	1.3.6.1.4.1.89.99.13	INTEGER	read-write	Actions to be performed by QoS service mode MIB.
INT rlQosServMibVersion	1.3.6.1.4.1.89.99.12	INTEGER	read-only	MIB's version, the current version is 1. 1 - original version. 2-
rlQosServNameToIndexEntry	1.3.6.1.4.1.89.99.10.1		not-accessible	The entry is used to get index form particular name and table type.
STR rlQosServNameToIndexName	1.3.6.1.4.1.89.99.10.1.2	DisplayString	not-accessible	Name of the table's entry
ROW rlQosServNameToIndexStatus	1.3.6.1.4.1.89.99.10.1.4	RowStatus	read-create	The status of a table entry. It is used to delete/Add an entry from this table.
rlQosServNameToIndexTable	1.3.6.1.4.1.89.99.10		not-accessible	The table is used to get specific table(s) indices from the name.
RLQ rlQosServNameToIndexTableId	1.3.6.1.4.1.89.99.10.1.1	RlQosServNamedTableId	not-accessible	Identification of the table, for which the index is retrieved.
INT rlQosServNameToIndexValue	1.3.6.1.4.1.89.99.10.1.3	INTEGER	read-create	The index of the table. Value '0' is invalid.
rlQosServProfileEntry	1.3.6.1.4.1.89.99.4.1		not-accessible	Each entry in this table describes one service profile element. The information includes: Profile name, type and various numeric parameters associated with the profile's service types. The index is sequential integer represent by rlQosServProfileIndex.
INT rlQosServProfileIndex	1.3.6.1.4.1.89.99.4.1.1	INTEGER	not-accessible	An arbitrary index for the profile table.
U32 rlQosServProfileIngressBurstSize	1.3.6.1.4.1.89.99.4.1.4	Unsigned32	read-create	Profile's Ingress Burst Size, used only by the 'rate limit' service.
U32 rlQosServProfileMaxBandwidth	1.3.6.1.4.1.89.99.4.1.5	Unsigned32	read-create	Profile's Max Bandwidth, used by the 'min delay', committed delay' 'min max bandwidth' and committed Bound Bandwidth'services. Value 0 is used only as default value, and is invalid otherwise.
U32 rlQosServProfileMaxDelay	1.3.6.1.4.1.89.99.4.1.7	Unsigned32	read-create	Profile's Max Delay, used only by the 'committed delay' service. Value 0 is used only as default value, and is invalid otherwise.
U32 rlQosServProfileMinBandwidth	1.3.6.1.4.1.89.99.4.1.6	Unsigned32	read-create	Profile's Min Bandwidth, used only by the 'min max bandwidth' service. Value 0 is used only as default value, and is invalid otherwise.
INT rlQosServProfileServiceType	1.3.6.1.4.1.89.99.4.1.3	INTEGER	read-create	Profile's service type.
ROW rlQosServProfileStatus	1.3.6.1.4.1.89.99.4.1.8	RowStatus	read-create	The status of a table entry. It is used to delete/Add an entry from this table.
rlQosServProfileTable	1.3.6.1.4.1.89.99.4		not-accessible	This table specifies (service) profile table information
INT rlQosServProfileType	1.3.6.1.4.1.89.99.4.1.2	INTEGER	read-create	Profile's type
rlQosServScalingErrorEntry	1.3.6.1.4.1.89.99.8.1		not-accessible	Each entry in this table specifies for each interface its scaling error, if such indeed exists.
NUM rlQosServScalingErrorIfIndex	1.3.6.1.4.1.89.99.8.1.1	InterfaceIndex	not-accessible	The interface index.
INT rlQosServScalingErrorReason	1.3.6.1.4.1.89.99.8.1.2	INTEGER	read-only	Scaling error reason.
rlQosServScalingErrorTable	1.3.6.1.4.1.89.99.8		not-accessible	This table specifies scaling error table
INT rlQosServServiceDefaultMappingDscp	1.3.6.1.4.1.89.99.7.1.2	INTEGER	read-write	DSCP default mapping value. A value of 64 means no DSCP default mapping is done.
rlQosServServiceDefaultMappingEntry	1.3.6.1.4.1.89.99.7.1		not-accessible	Each entry in this table describes one service priority entry. The information includes: service's priority, a pointer to its corresponding index in the service table. The index is sequential integer represent by rlQosServServicePriorityIndex.
rlQosServServiceDefaultMappingTable	1.3.6.1.4.1.89.99.7		not-accessible	This table specifies service priority table information.
INT rlQosServServiceDefaultMappingType	1.3.6.1.4.1.89.99.7.1.1	INTEGER	not-accessible	Service type for the default mapping. 'Trust DSCP' service type is absent since no default mapping is possible for it.
INT rlQosServServiceDefaultMappingVpt	1.3.6.1.4.1.89.99.7.1.3	INTEGER	read-write	Vpt default mapping value. A value of 9 means no VPT default mapping is done.
rlQosServServiceEntry	1.3.6.1.4.1.89.99.5.1		not-accessible	Each entry in this table describes one service profile element. The information includes: service's index, priority, pointers to associated profile and Fcl, operational and administrative statuses, ingress and egress interface lists, and two operational parameter values associated with a service type, as defined in the profile table. The index is sequential integer represent by rlQosServServiceIndex.
INT rlQosServServiceFclPointer	1.3.6.1.4.1.89.99.5.1.4	INTEGER	read-create	Pointer to attached FCL entry.
INT rlQosServServiceIndex	1.3.6.1.4.1.89.99.5.1.1	INTEGER	not-accessible	An arbitrary index for the service table.
POR rlQosServServiceInIfList	1.3.6.1.4.1.89.99.5.1.5	PortList	read-create	Ingress interface list associated with this service entry.
POR rlQosServServiceOutIfList	1.3.6.1.4.1.89.99.5.1.6	PortList	read-create	Egress interface list associated with this service entry.
U32 rlQosServServicePriority	1.3.6.1.4.1.89.99.5.1.2	Unsigned32	read-create	Service's priority.
rlQosServServicePriorityEntry	1.3.6.1.4.1.89.99.6.1		not-accessible	Each entry in this table maps a priority to a service. The information includes: service's priority and the service index in the service table. The index is sequential integer represent by rlQosServServicePriorityIndex.
INT rlQosServServicePriorityIndex	1.3.6.1.4.1.89.99.6.1.1	INTEGER	not-accessible	The service priority.
INT rlQosServServicePriorityPointer	1.3.6.1.4.1.89.99.6.1.2	INTEGER	read-only	The index of the service associated with this priority in the service table.
rlQosServServicePriorityTable	1.3.6.1.4.1.89.99.6		not-accessible	This table specifies service priority table information.
U32 rlQosServServiceProfileParamOper	1.3.6.1.4.1.89.99.5.1.8	Unsigned32	read-only	If the service type specified in a profile associated with this entry has a parameter, this object instance specifies the parameter's operative value. This value will be different from the value defined in the associated profile only in case of scaling out, otherwise value 0 is used.
INT rlQosServServiceProfilePointer	1.3.6.1.4.1.89.99.5.1.3	INTEGER	read-create	Pointer to attached profile entry.
POR rlQosServServiceScaledOutIfList	1.3.6.1.4.1.89.99.5.1.7	PortList	read-only	Egress scaled interface list associated with this service entry.
ROW rlQosServServiceStatus	1.3.6.1.4.1.89.99.5.1.11	RowStatus	read-create	The status of a table entry. It is used to delete/Add an entry from this table.
RLQ rlQosServServiceStatusAdmin	1.3.6.1.4.1.89.99.5.1.10	RlQosServServiceStatus	read-create	Administrative value of the service status.
RLQ rlQosServServiceStatusOper	1.3.6.1.4.1.89.99.5.1.9	RlQosServServiceStatus	read-only	Operational value of the service status.
rlQosServServiceTable	1.3.6.1.4.1.89.99.5		not-accessible	This table specifies service table information.
T/F rlQosServTemplateDestIp	1.3.6.1.4.1.89.99.1.1.7	TruthValue	read-write	Include the destination Ip field as a template classifier.
IP rlQosServTemplateDestIpMask	1.3.6.1.4.1.89.99.1.1.8	IpAddress	read-write	Destination Ip address mask. It may specify any byte (not bit), within the Ip address, for classification, designated by 0.
T/F rlQosServTemplateDestMac	1.3.6.1.4.1.89.99.1.1.2	TruthValue	read-write	Include the destination Mac field as a template classifier.
MAC rlQosServTemplateDestMacMask	1.3.6.1.4.1.89.99.1.1.3	MacAddress	read-write	Destination Mac address mask. It may specify any byte (not bit), within the Mac address, for classification, designated by 0.
T/F rlQosServTemplateDestPort	1.3.6.1.4.1.89.99.1.1.13	TruthValue	read-write	Include the Tcp/Udp destination port field as a template classifier.
rlQosServTemplateEntry	1.3.6.1.4.1.89.99.1.1		not-accessible	The entry of this table describes all classifier fields. The index is sequential integer represent by rlQosServTemplateEntry.
T/F rlQosServTemplateEtherType	1.3.6.1.4.1.89.99.1.1.16	TruthValue	read-write	Include the Ether Type field as a template classifier.
T/F rlQosServTemplateIcmpCode	1.3.6.1.4.1.89.99.1.1.19	TruthValue	read-write	Include the Icmp code field as a template classifier.
T/F rlQosServTemplateIcmpType	1.3.6.1.4.1.89.99.1.1.18	TruthValue	read-write	Include the Icmp type field as a template classifier.
T/F rlQosServTemplateIgmpType	1.3.6.1.4.1.89.99.1.1.20	TruthValue	read-write	Include the Igmp type field as a template classifier.
INT rlQosServTemplateIndex	1.3.6.1.4.1.89.99.1.1.1	INTEGER	not-accessible	An arbitrary index for the template table.
T/F rlQosServTemplateIpProtocol	1.3.6.1.4.1.89.99.1.1.11	TruthValue	read-write	Include the Ip protocol field as a template classifier.
T/F rlQosServTemplateSrcIp	1.3.6.1.4.1.89.99.1.1.9	TruthValue	read-write	Include the source Ip field as a template classifier.
IP rlQosServTemplateSrcIpMask	1.3.6.1.4.1.89.99.1.1.10	IpAddress	read-write	Source Ip address mask. It may specify any byte (not bit), within the Ip address, for classification, designated by 0.
T/F rlQosServTemplateSrcMac	1.3.6.1.4.1.89.99.1.1.4	TruthValue	read-write	Include the source Mac field as a template classifier.
MAC rlQosServTemplateSrcMacMask	1.3.6.1.4.1.89.99.1.1.5	MacAddress	read-write	Source Mac address mask. It may specify any byte (not bit), within the Mac address, for classification, designated by 0.
T/F rlQosServTemplateSrcPort	1.3.6.1.4.1.89.99.1.1.12	TruthValue	read-write	Include the Tcp/Udp source port field as a template classifier.
rlQosServTemplateTable	1.3.6.1.4.1.89.99.1		not-accessible	This table specifies classification template information. Currently this table will contain exactly one entry.
T/F rlQosServTemplateTcpFlags	1.3.6.1.4.1.89.99.1.1.17	TruthValue	read-write	Include the Tcp flags (Control Bits) field as a template classifier.
T/F rlQosServTemplateTos	1.3.6.1.4.1.89.99.1.1.14	TruthValue	read-write	Include the Tos field as a template classifier.
T/F rlQosServTemplateVlan	1.3.6.1.4.1.89.99.1.1.6	TruthValue	read-write	Include the Vlan field as a template classifier.
T/F rlQosServTemplateVpt	1.3.6.1.4.1.89.99.1.1.15	TruthValue	read-write	Include the VPT field as a template classifier.

RFC description

Vendor-private MIB for Radlan Networks (acquired by Alcatel-Lucent) defining QoS service definitions and traffic management objects.

Start monitoring Marvell/RADLAN-based managed Ethernet switch, OEM switches (QoS traffic-classification templates) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RADLAN-QOS-SERV

What Is RADLAN-QOS-SERV?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description