RADLAN-DOT1X-MIB

All MIBs › RADLAN-DOT1X-MIB

Organization: Radlan - a MARVELL company. Marvell Semiconductor, Inc.

Last Updated: 2007-01-02

Category: Security, Vendor: RADLAN/Cisco SB

Description: Manages IEEE 802.1X port-based network access control authentication on Marvell switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RADLAN-DOT1X-MIB?

RADLAN-DOT1X-MIB is a vendor-private extension to the IEEE 802.1X standard, developed by RADLAN Computer Communications (whose switch operating software core was later used by Marvell) for managed Ethernet switches. It exposes configuration and status data for port-based network access control, including per-session authentication statistics, guest VLAN assignment, unauthenticated VLAN handling, and user-based VLAN mapping. In monitoring terms it tracks the software/authentication status of switch ports rather than physical hardware health: administrators can see which authentication method a session used, whether a port has fallen back to a guest or restricted VLAN, and aggregate statistics on 802.1X session outcomes. It builds directly on the IEEE 802.1X standard (companion to the standard IEEE8021-PAE-MIB), adding RADLAN-specific features such as guest VLAN and user-based VLAN support. It is typically deployed on enterprise access-layer switches where 802.1X network access control is enforced at the edge. Engineers can download the RADLAN-DOT1X-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in RADLAN-DOT1X-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Marvell/RADLAN-based managed Ethernet switch
enterprise access-layer switch

Monitoring Examples

An administrator polling rldot1xExtAuthSessionStatsTable/rldot1xExtAuthSessionStatsEntry can inspect rlDot1xAuthSessionAuthenticMethod to confirm whether a client authenticated via EAP or MAC-based bypass. If rldot1xGuestVlanSupported and rldot1xGuestVlanVID/rldot1xGuestVlanPorts show a port has shifted into the guest VLAN, that signals an endpoint failed 802.1X authentication and was quarantined. Checking rldot1xUnAuthenticatedVlanTable entries similarly reveals ports parked in a restricted VLAN pending credentials, useful for spotting misconfigured supplicants or rogue devices.

What Can Be Monitored

802.1X authentication method per session
guest VLAN assignment status
unauthenticated VLAN port membership
user-based VLAN mapping
per-session authentication statistics

Imported Objects

From BRIDGE-MIB

MacAddress

From IEEE8021-PAE-MIB

PaeControlledPortStatus
dot1xAuthSessionStatsEntry	OBJECT-TYPE
dot1xPaePortNumber	OBJECT-TYPE

From Q-BRIDGE-MIB

PortList
VlanIndex
dot1qFdbId	OBJECT-TYPE

From RADLAN-MIB

rnd	OBJECT-IDENTITY

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-SMI

Counter32
Counter64
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

RowStatus
TruthValue

How to Use in IPNetwork Monitor

Example using rldot1xAuthMultiEapolFramesRx OID:

Select a Marvell/RADLAN-based managed Ethernet switch, enterprise access-layer switch (802.1X port access control) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type rldot1xAuthMultiEapolFramesRx into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of valid EAPOL frames of any type that have been received by this Authenticator. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
rldot1x	1.3.6.1.4.1.89.95			This private MIB module defines dot1x private MIBs.
T/F rldot1xAuthenticationOpenEnabled	1.3.6.1.4.1.89.95.10.1.11	TruthValue	read-write	Open access allows clients or devices to gain network access before authentication is performed. In the mode the switch performs failure replies received from a Radius server as success.
rldot1xAuthenticationPortEntry	1.3.6.1.4.1.89.95.10.1		not-accessible	The Port number and mac method
INT rldot1xAuthenticationPortMethod	1.3.6.1.4.1.89.95.10.1.1	INTEGER	read-write	The value of the 802.1x-based, mac-based and web-based authentication.
rldot1xAuthenticationPortTable	1.3.6.1.4.1.89.95.10		not-accessible	A table of system level information for each port supported by the Port Access Entity. An entry appears in this table for each port of this system.
C32 rldot1xAuthMultiAuthEapStartsWhileAuthenticated	1.3.6.1.4.1.89.95.12.1.10	Counter32	read-only	Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of an EAPOL-Start message being received from the Supplicant.
C32 rldot1xAuthMultiAuthEapStartsWhileAuthenticating	1.3.6.1.4.1.89.95.12.1.8	Counter32	read-only	Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of an EAPOL-Start message being received from the Supplicant.
C32 rldot1xAuthMultiAuthFailWhileAuthenticating	1.3.6.1.4.1.89.95.12.1.6	Counter32	read-only	Counts the number of times that the state machine transitions from AUTHENTICATING to HELD, as a result of the Backend Authentication state machine indicating authentication failure (authFail = TRUE).
C32 rldot1xAuthMultiAuthReauthsWhileAuthenticated	1.3.6.1.4.1.89.95.12.1.9	Counter32	read-only	Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of a reauthentication request (reAuthenticate = TRUE).
C32 rldot1xAuthMultiAuthReauthsWhileAuthenticating	1.3.6.1.4.1.89.95.12.1.7	Counter32	read-only	Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of a reauthentication request (reAuthenticate = TRUE).
C32 rldot1xAuthMultiAuthSuccessWhileAuthenticating	1.3.6.1.4.1.89.95.12.1.5	Counter32	read-only	Counts the number of times that the state machine transitions from AUTHENTICATING to AUTHENTICATED, as a result of the Backend Authentication state machine indicating successful authentication of the Supplicant (authSuccess = TRUE).
C32 rldot1xAuthMultiBackendAccessChallenges	1.3.6.1.4.1.89.95.12.1.12	Counter32	read-only	Counts the number of times that the state machine receives an initial Access-Challenge packet from the Authentication server (i.e., aReq becomes TRUE, causing exit from the RESPONSE state). Indicates that the Authentication Server has communication with the Authenticator.
INT rldot1xAuthMultiBackendAuthState	1.3.6.1.4.1.89.95.14.1.4	INTEGER	read-only	The current state of the Backend Authentication state machine.
C32 rldot1xAuthMultiBackendAuthSuccesses	1.3.6.1.4.1.89.95.12.1.15	Counter32	read-only	Counts the number of times that the state machine receives an EAP-Success message from the Authentication Server (i.e., aSuccess becomes TRUE, causing a transition from RESPONSE to SUCCESS). Indicates that the Supplicant has successfully authenticated to the Authentication Server.
C32 rldot1xAuthMultiBackendNonNakResponsesFromSupplicant	1.3.6.1.4.1.89.95.12.1.14	Counter32	read-only	Counts the number of times that the state machine receives a response from the Supplicant to an initial EAP-Request, and the response is something other than EAP-NAK (i.e., rxResp becomes TRUE, causing the state machine to transition from REQUEST to RESPONSE, and the response is not an EAP-NAK). Indicates that the Supplicant can respond to the Authenticators chosen EAP-method.
C32 rldot1xAuthMultiBackendOtherRequestsToSupplicant	1.3.6.1.4.1.89.95.12.1.13	Counter32	read-only	Counts the number of times that the state machine sends an EAP-Request packet (other than an Identity, Notification, Failure or Success message) to the Supplicant (i.e., executes txReq on entry to the REQUEST state). Indicates that the Authenticator chose an EAP-method.
C32 rldot1xAuthMultiBackendResponses	1.3.6.1.4.1.89.95.12.1.11	Counter32	read-only	Counts the number of times that the state machine sends an initial Access-Request packet to the Authentication server (i.e., executes sendRespToServer on entry to the RESPONSE state). Indicates that the Authenticator attempted communication with the Authentication Server.
rldot1xAuthMultiConfigEntry	1.3.6.1.4.1.89.95.14.1		not-accessible	The configuration information for an Authenticator PAE.
rldot1xAuthMultiConfigTable	1.3.6.1.4.1.89.95.14		not-accessible	A table that contains the configuration objects for the Authenticator PAE associated with each port and MAC. An entry appears in this table for each port and MAC that may authenticate access to itself.
PAE rldot1xAuthMultiControlledPortStatus	1.3.6.1.4.1.89.95.14.1.5	PaeControlledPortStatus	read-only	The current value of the controlled Port status parameter for the Port.
rldot1xAuthMultiDiagEntry	1.3.6.1.4.1.89.95.12.1		not-accessible	The diagnostics information for an Authenticator PAE.
INT rldot1xAuthMultiDiagPortNumber	1.3.6.1.4.1.89.95.12.1.1	INTEGER	read-only	Port Number.
MAC rldot1xAuthMultiDiagSourceMac	1.3.6.1.4.1.89.95.12.1.2	MacAddress	read-only	Mac of the authentication session.
rldot1xAuthMultiDiagTable	1.3.6.1.4.1.89.95.12		not-accessible	A table that contains the diagnostics objects for the Authenticator PAE associated with each Port and MAC. An entry appears in this table for each port and MAC that have an authentication session currently running under way for them.
C32 rldot1xAuthMultiEapLengthErrorFramesRx	1.3.6.1.4.1.89.95.11.1.12	Counter32	read-only	The number of EAPOL frames that have been received by this Authenticator in which the Packet Body Length field is invalid.
C32 rldot1xAuthMultiEapolFramesRxEx	1.3.6.1.4.1.89.95.11.1.3	Counter32	read-only	The number of valid EAPOL frames of any type that have been received by this Authenticator.
C32 rldot1xAuthMultiEapolFramesTx	1.3.6.1.4.1.89.95.11.1.4	Counter32	read-only	The number of EAPOL frames of any type that have been transmitted by this Authenticator.
C32 rldot1xAuthMultiEapolLogoffFramesRx	1.3.6.1.4.1.89.95.11.1.6	Counter32	read-only	The number of EAPOL Logoff frames that have been received by this Authenticator.
C32 rldot1xAuthMultiEapolReqFramesTx	1.3.6.1.4.1.89.95.11.1.10	Counter32	read-only	The number of EAP Request frames (other than Rq/Id frames) that have been transmitted by this Authenticator.
C32 rldot1xAuthMultiEapolReqIdFramesTx	1.3.6.1.4.1.89.95.11.1.9	Counter32	read-only	The number of EAP Req/Id frames that have been transmitted by this Authenticator.
C32 rldot1xAuthMultiEapolRespFramesRx	1.3.6.1.4.1.89.95.11.1.8	Counter32	read-only	The number of valid EAP Response frames (other than Resp/Id frames) that have been received by this Authenticator.
C32 rldot1xAuthMultiEapolRespIdFramesRx	1.3.6.1.4.1.89.95.11.1.7	Counter32	read-only	The number of EAP Resp/Id frames that have been received by this Authenticator.
C32 rldot1xAuthMultiEapolStartFramesRx	1.3.6.1.4.1.89.95.11.1.5	Counter32	read-only	The number of EAPOL Start frames that have been received by this Authenticator.
C32 rldot1xAuthMultiEntersAuthenticating	1.3.6.1.4.1.89.95.12.1.4	Counter32	read-only	Counts the number of times that the state machine transitions from CONNECTING to AUTHENTICATING, as a result of an EAP-Response/Identity message being received from the Supplicant.
C32 rldot1xAuthMultiEntersConnecting	1.3.6.1.4.1.89.95.12.1.3	Counter32	read-only	Counts the number of times that the state machine transitions to the CONNECTING state from any other state.
C32 rldot1xAuthMultiInvalidEapolFramesRx	1.3.6.1.4.1.89.95.11.1.11	Counter32	read-only	The number of EAPOL frames that have been received by this Authenticator in which the frame type is not recognized.
INT rldot1xAuthMultiPaeState	1.3.6.1.4.1.89.95.14.1.3	INTEGER	read-only	The current value of the Authenticator PAE state machine.
INT rldot1xAuthMultiPortNumber	1.3.6.1.4.1.89.95.14.1.1	INTEGER	read-only	Port Number.
C32 rldot1xAuthMultiSessionFramesRx	1.3.6.1.4.1.89.95.13.1.5	Counter32	read-only	The number of user data frames received on this Port during the session.
C32 rldot1xAuthMultiSessionFramesTx	1.3.6.1.4.1.89.95.13.1.6	Counter32	read-only	The number of user data frames transmitted on this Port during the session.
STR rldot1xAuthMultiSessionId	1.3.6.1.4.1.89.95.13.1.7	SnmpAdminString	read-only	A unique identifier for the session, in the form of a printable ASCII string of at least three characters.
INT rlDot1xAuthMultiSessionMethodType	1.3.6.1.4.1.89.95.13.1.14	INTEGER	read-only	The current session method type.
INT rlDot1xAuthMultiSessionMonitorResultsReason	1.3.6.1.4.1.89.95.13.1.13	INTEGER	read-only	The monitor result reason of the session.
C64 rldot1xAuthMultiSessionOctetsRx	1.3.6.1.4.1.89.95.13.1.3	Counter64	read-only	The number of octets received in user data frames on this Port during the session.
C64 rldot1xAuthMultiSessionOctetsTx	1.3.6.1.4.1.89.95.13.1.4	Counter64	read-only	The number of octets transmitted in user data frames on this Port during the session.
STR rldot1xAuthMultiSessionRadiusAttrFilterId	1.3.6.1.4.1.89.95.13.1.11	SnmpAdminString	read-only	First filter ID that received from Radius attributes.
STR rldot1xAuthMultiSessionRadiusAttrSecondFilterId	1.3.6.1.4.1.89.95.13.1.12	SnmpAdminString	read-only	Second filter ID that received from Radius attributes.
INT rldot1xAuthMultiSessionRadiusAttrVlan	1.3.6.1.4.1.89.95.13.1.10	INTEGER	read-only	VLAN ID that received from Radius attributes.
rldot1xAuthMultiSessionStatsEntry	1.3.6.1.4.1.89.95.13.1		not-accessible	The session statistics information for an Authenticator PAE. This shows the current values being collected for each session that is still in progress, or the final values for the last valid session on each port where there is no session currently active.
INT rldot1xAuthMultiSessionStatsPortNumber	1.3.6.1.4.1.89.95.13.1.1	INTEGER	read-only	Port Number.
MAC rldot1xAuthMultiSessionStatsSourceMac	1.3.6.1.4.1.89.95.13.1.2	MacAddress	read-only	Mac of the authentication session.
rldot1xAuthMultiSessionStatsTable	1.3.6.1.4.1.89.95.13		not-accessible	A table that contains the session statistics objects for the Authenticator PAE associated with each Port. An entry appears in this table for each port that may authenticate access to itself.
TIK rldot1xAuthMultiSessionTime	1.3.6.1.4.1.89.95.13.1.8	TimeTicks	read-only	The duration of the session in seconds.
STR rldot1xAuthMultiSessionUserName	1.3.6.1.4.1.89.95.13.1.9	SnmpAdminString	read-only	The User-Name representing the identity of the Supplicant PAE.
MAC rldot1xAuthMultiSourceMac	1.3.6.1.4.1.89.95.14.1.2	MacAddress	read-only	Mac of the authentication session.
rldot1xAuthMultiStatsEntry	1.3.6.1.4.1.89.95.11.1		not-accessible	The statistics information for an Authenticator PAE.
INT rldot1xAuthMultiStatsPortNumber	1.3.6.1.4.1.89.95.11.1.1	INTEGER	read-only	Port Number.
MAC rldot1xAuthMultiStatsSourceMac	1.3.6.1.4.1.89.95.11.1.2	MacAddress	read-only	Mac of the authentication session.
rldot1xAuthMultiStatsTable	1.3.6.1.4.1.89.95.11		not-accessible	A table that contains the statistics objects for the Authenticator PAE associated with each Port and MAC for multisession 802.1x mode of operation. An entry appears in this table for each port and MAC that have an authentication session currently running under way for them.
INT rlDot1xAuthSessionAuthenticMethod	1.3.6.1.4.1.89.95.2.1.1	INTEGER	read-only	The authentication method used to establish the session.
T/F rldot1xBpduFilteringEnabled	1.3.6.1.4.1.89.95.15	TruthValue	read-write	Specify that when 802.1x is globally disabled, 802.1x BPDU packets would be filtered or bridged.
POR rldot1xClearPortMibCounters	1.3.6.1.4.1.89.95.24	PortList	read-write	Each bit that is set in this portList represent a port that its mib counters should be reset.
rldot1xExtAuthSessionStatsEntry	1.3.6.1.4.1.89.95.2.1		not-accessible	The session statistics information for an Authenticator PAE. This shows the current values being collected for each session that is still in progress, or the final values for the last valid session on each port where there is no session currently active.
rldot1xExtAuthSessionStatsTable	1.3.6.1.4.1.89.95.2		not-accessible	A table that contains the session statistics objects for the Authenticator PAE associated with each Port. An entry appears in this table for each port that may authenticate access to itself.
POR rldot1xGuestVlanPorts	1.3.6.1.4.1.89.95.5	PortList	read-write	the ports that can be members in the guest vlan
T/F rldot1xGuestVlanSupported	1.3.6.1.4.1.89.95.3	TruthValue	read-only	indicate if guest vlan is supported.
INT rldot1xGuestVlanTimeInterval	1.3.6.1.4.1.89.95.19	INTEGER	read-write	indicate the guest vlan timeout interval.
VLA rldot1xGuestVlanVID	1.3.6.1.4.1.89.95.4	VlanIndex	read-write	specify the guest vlan tag , 0 for non exiting.
rldot1xLegacyPortEntry	1.3.6.1.4.1.89.95.22.1		not-accessible	The Port number and leagcy mode
T/F rldot1xLegacyPortModeEnabled	1.3.6.1.4.1.89.95.22.1.1	TruthValue	read-write	Indicates whether in multiple sessions mode work according to legacy devices mode or not.
rldot1xLegacyPortTable	1.3.6.1.4.1.89.95.22		not-accessible	A table of system level information for each port supported by the Port Access Entity. An entry appears in this table for each port of this system.
rldot1xLockedCientsEntry	1.3.6.1.4.1.89.95.28.1		not-accessible	The locked clients entry that entered silence period timeout for Web-based authentication.
INT rldot1xLockedCientsPortNumber	1.3.6.1.4.1.89.95.28.1.1	INTEGER	read-only	Port Number.
INT rldot1xLockedCientsRemainedTime	1.3.6.1.4.1.89.95.28.1.3	INTEGER	read-only	The time that is remained till the expiry of silence period.
ROW rldot1xLockedCientsRowStatus	1.3.6.1.4.1.89.95.28.1.4	RowStatus	read-write	Row status.
MAC rldot1xLockedCientsSourceMac	1.3.6.1.4.1.89.95.28.1.2	MacAddress	read-only	Mac of the locked client.
rldot1xLockedCientsTable	1.3.6.1.4.1.89.95.28		not-accessible	A table that contains the locked clients information for Web-based authentication.
T/F rldot1xMacAuthFailureTrapEnabled	1.3.6.1.4.1.89.95.21	TruthValue	read-write	Specify if sending traps when MAC address was failed in authentication of the 802.1X MAC authentication access control.
T/F rldot1xMacAuthSuccessTrapEnabled	1.3.6.1.4.1.89.95.20	TruthValue	read-write	Specify if sending traps when a MAC address is successfully authenticated by the 802.1X mac-authentication access control.
INT rldot1xMacWebAuthFailureTrapEnabled	1.3.6.1.4.1.89.95.27	INTEGER	read-write	Specify if sending traps per authentication method when a session was failed.
INT rldot1xMacWebAuthSuccessTrapEnabled	1.3.6.1.4.1.89.95.26	INTEGER	read-write	Specify if sending traps per authentication method when a session is successfully authenticated.
U32 rldot1xMaxHosts	1.3.6.1.4.1.89.95.10.1.7	Unsigned32	read-write	Maximum number of authenticated hosts allowed on the interface. A value of 0 means no limitation.
INT rldot1xMaxLoginAttempts	1.3.6.1.4.1.89.95.10.1.8	INTEGER	read-write	Maximum number of allowedlogin attempts on the interface. A value of 0 means the infinite number of attemtps. The configuration is applied only to Web-Based authentication.
INT rldot1xMibVersion	1.3.6.1.4.1.89.95.1	INTEGER	read-only	MIB's version, the current version is 1.
INT rldot1xNumOfAuthorizedHosts	1.3.6.1.4.1.89.95.10.1.10	INTEGER	read-only	Number of authorized host in multi-sessions mode.
T/F rldot1xRadiusAttAclNameEnabled	1.3.6.1.4.1.89.95.10.1.3	TruthValue	read-write	Defines if treat ACL Names that received from Radius attributes in Radius-Accept message.
T/F rldot1xRadiusAttributesErrorsAclReject	1.3.6.1.4.1.89.95.18	TruthValue	read-write	Specify ACL error handling for the Radius attributes feature.
T/F rldot1xRadiusAttrVlanIdEnabled	1.3.6.1.4.1.89.95.10.1.2	TruthValue	read-write	Defines if treat VLAN ID that received from Radius attributes in Radius-Accept message.
VLA rldot1xRadiusAttrVlanIdentifier	1.3.6.1.4.1.89.95.10.1.6	VlanIndex	read-write	In case that value is not 0, This field will define the VLAN ID in case that it is not received from Radius attributes in Radius-Accept message.
INT rldot1xSystemAuthControlMonitorVlan	1.3.6.1.4.1.89.95.23	INTEGER	read-write	VLAN Tag of 802.1x monitoring VLAN in the System. value of 0 means that the monitoring mode is disabled.
T/F rldot1xTimeBasedActive	1.3.6.1.4.1.89.95.10.1.5	TruthValue	read-only	Specifies if time range is active now or not.
STR rldot1xTimeBasedName	1.3.6.1.4.1.89.95.10.1.4	SnmpAdminString	read-write	Specifies a time range. When the Time Range is not in effect the port state would be Unauthorized.
INT rldot1xTimeoutSilencePeriod	1.3.6.1.4.1.89.95.10.1.9	INTEGER	read-write	Set the number of seconds that if an authorized client did not send traffic during this period, then the client is changed to unauthrized. The configuration is applied only to Web-Based authentication.
rldot1xUnAuthenticatedVlanEntry	1.3.6.1.4.1.89.95.7.1		not-accessible	port belong to vlan in all port authenticated state except force unauthenticated entry
ROW rldot1xUnAuthenticatedVlanStatus	1.3.6.1.4.1.89.95.7.1.1	RowStatus	read-create	The row status variable, used according to row installation and removal conventions.
T/F rldot1xUnAuthenticatedVlanSupported	1.3.6.1.4.1.89.95.6	TruthValue	read-only	indicate if unauthenticated Vlan is supported.
rldot1xUnAuthenticatedVlanTable	1.3.6.1.4.1.89.95.7		not-accessible	port belong to vlan in all port authenticated state except force unauthenticated table
POR rldot1xUserBasedVlanPorts	1.3.6.1.4.1.89.95.9	PortList	read-write	the ports that can be members in the user based vlan
T/F rldot1xUserBasedVlanSupported	1.3.6.1.4.1.89.95.8	TruthValue	read-only	indicate if user based Vlan is supported.
T/F rldot1xWebQuietFailureTrapEnabled	1.3.6.1.4.1.89.95.25	TruthValue	read-write	Specify if sending traps when a client is set in quiet state after the maximum sequential attempts of login.

RFC description

Radlan private IEEE 802.1X port-based network access control MIB for authentication session tracking and statistics.

Start monitoring Marvell/RADLAN-based managed Ethernet switch, enterprise access-layer switch (802.1X port access control) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RADLAN-DOT1X-MIB