All MIBs › RADLAN-AGGREGATEVLAN-MIB
Organization: Radlan - a MARVELL company. Marvell Semiconductor, Inc.
Last Updated: 2007-01-02
Category: VLAN Management, Vendor: RADLAN/Cisco SB
Description:
Manages aggregate (super) VLAN configuration for subscriber aggregation on Marvell switches.
Imported Objects
From IF-MIB
| InterfaceIndex |
From RADLAN-MIB
| rnd | OBJECT-IDENTITY |
From SNMPv2-SMI
| MODULE-IDENTITY | |
| OBJECT-TYPE |
From SNMPv2-TC
| DisplayString | |
| RowStatus |
What Is RADLAN-AGGREGATEVLAN-MIB?
RADLAN-AGGREGATEVLAN-MIB is a Radlan (Marvell) proprietary MIB implementing Aggregate VLANs, a super-VLAN feature letting multiple sub-VLANs (each with its own IP subnet) share a single routed interface and gateway to conserve IP address space. Its aggregate-VLAN table records each aggregate VLAN's name, physical-address type, and row status, while a sub-VLAN table maps member sub-VLANs (by interface index) to their parent aggregate, plus an ARP-proxy enable object. As a configuration MIB it lets an administrator confirm which sub-VLANs are bound to a given aggregate VLAN and whether ARP proxying is enabled between them. It is deployed on Radlan/Marvell-based OEM switch platforms (seen under multiple vendor brandings). Engineers can download the RADLAN-AGGREGATEVLAN-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in RADLAN-AGGREGATEVLAN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
What Can Be Monitored
- aggregate VLAN and sub-VLAN membership
- ARP proxy state
Supported Devices
- Radlan/Marvell-based OEM switch platforms
Monitoring Examples
An administrator checks rlAggregateSubVlanTable to confirm a newly-created sub-VLAN has been correctly bound to its parent aggregate VLAN before enabling ARP proxy for inter-subnet host communication.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| rlAggregateVlan | 1.3.6.1.4.1.89.73 | This private MIB module defines Aggregate Vlan private MIBs. | ||
| INT rlAggregateVlanMibVersion | 1.3.6.1.4.1.89.73.1 | INTEGER | read-only | MIB's version, the current version is 1. |
| rlAggregateVlanTable | 1.3.6.1.4.1.89.73.2 | not-accessible | The table creates an aggregateVlans, the IfIndex is from 10000 | |
| rlAggregateVlanEntry | 1.3.6.1.4.1.89.73.2.1 | not-accessible | The row definition for this table. | |
| NUM rlAggregateVlanIndex | 1.3.6.1.4.1.89.73.2.1.1 | InterfaceIndex | not-accessible | This index indicate the aggrigateVlan id, the aggregate vlan index is starting from 10000 |
| STR rlAggregateVlanName | 1.3.6.1.4.1.89.73.2.1.2 | DisplayString | read-create | The name of the aggregateVlan |
| INT rlAggregateVlanPhysAddressType | 1.3.6.1.4.1.89.73.2.1.3 | INTEGER | read-create | This variable indicates whether the physical address assigned to this VLAN should be the default one or be chosen from the set of reserved physical addresses of the device. |
| ROW rlAggregateVlanStatus | 1.3.6.1.4.1.89.73.2.1.4 | RowStatus | read-create | The status of the aggregateVlan table entry. It's used to delete an entry |
| rlAggregateSubVlanTable | 1.3.6.1.4.1.89.73.3 | not-accessible | The table indicates all the allocated sub-vlans to the aggregateVlans, an entry in the rlAggregateVlanTable must be exist before allocating the subVlans | |
| rlAggregateSubVlanEntry | 1.3.6.1.4.1.89.73.3.1 | not-accessible | The row definition for this table. | |
| NUM rlAggregateSubVlanIfIndex | 1.3.6.1.4.1.89.73.3.1.1 | InterfaceIndex | read-only | Indicate the subVlan that allocated to the aggregate vlan |
| ROW rlAggregateSubVlanStatus | 1.3.6.1.4.1.89.73.3.1.2 | RowStatus | read-create | The status of the aggregateSubVlan table entry. It's used to delete an entry |
| INT rlAggregateVlanArpProxy | 1.3.6.1.4.1.89.73.4 | INTEGER | read-write | When ARP Proxy is enabled, the router can respond to ARP requests for nodes located on different sub-vlans, which belong to the same Super VLAN.The router responds with its own MAC address. When ARP Proxy is disabled, the router responds only to ARP requests for its own IP addresses. |
RFC description
Marvell Radlan aggregate VLAN configuration for multiple virtual LAN management.
Start monitoring Radlan/Marvell-based OEM switch platforms (Aggregate VLAN/super-VLAN) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.