All MIBs › TIMETRA-ATM-MIB
Organization: Alcatel-Lucent
Last Updated: 2011-02-01
Category: ATM, Nokia SR OS / Alcatel-Lucent 7750 SR
Description: Manages Nokia/Alcatel-Lucent 7750 SR ATM interface, VP, VC, and traffic descriptor configuration.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is TIMETRA-ATM-MIB?
TIMETRA-ATM-MIB is Alcatel-Lucent's (now Nokia) proprietary MIB for the 7750 SR service router platform, managing and provisioning ATM functionality including MDA (media dependent adapter) info, ATM interface configuration, VP/VC connections, and traffic descriptors. It exposes hardware-level data (per-MDA ATM adapter info), interface configuration, and extensive traffic statistics tables covering cell/AAL5 counters at the interface and VCL level. Its monitoring value centers on interface/hardware status and performance counters: tAtmMdaInfoTable reflects the physical ATM MDA's status, while tAtmIntfStatsTable/tAtmIntfAal5StatsTable and tAtmVclStatisticsTable expose traffic performance counters used to detect cell loss, errors, or congestion on ATM circuits. It explicitly builds on and extends the IETF AToM MIB (RFC 2515) and ATM Forum ILMI link attributes. It is typically deployed on Alcatel-Lucent/Nokia 7750 SR routers in carrier networks still carrying legacy ATM traffic alongside newer packet services, and administrators can download the TIMETRA-ATM-MIB file to load into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in TIMETRA-ATM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Nokia/Alcatel-Lucent 7750 SR series routers (ATM interfaces)
Monitoring Examples
An administrator would poll tAtmMdaInfoTable/tAtmMdaInfoEntry to confirm an ATM MDA card is present and healthy, then check tAtmIntfConfTable for interface-level ATM configuration and tAtmIntfStatsTable/tAtmIntfAal5StatsTable for cell and AAL5 frame error/loss counters that would reveal a degraded ATM circuit. Drilling into tAtmVclInfoTable and tAtmVclStatisticsTable per virtual channel link lets an operator isolate performance problems, such as rising discard counts, to a specific PVC rather than the whole interface.
What Can Be Monitored
- ATM MDA adapter status
- ATM interface configuration
- ATM interface cell/AAL5 statistics
- VCL (virtual channel link) info and statistics
- traffic descriptor settings
This MIB depends on
Related MIBs
Imported Objects
From ATM-MIB
| aal5VccEntry | OBJECT-TYPE |
| atmInterfaceConfEntry | OBJECT-TYPE |
| atmInterfaceConfVccs | OBJECT-TYPE |
| atmInterfaceConfVpcs | OBJECT-TYPE |
| atmInterfaceCurrentMaxVciBits | OBJECT-TYPE |
| atmInterfaceCurrentMaxVpiBits | OBJECT-TYPE |
| atmInterfaceDs3PlcpAlarmState | OBJECT-TYPE |
| atmInterfaceMaxActiveVciBits | OBJECT-TYPE |
| atmInterfaceMaxActiveVpiBits | OBJECT-TYPE |
| atmInterfaceTCAlarmState | OBJECT-TYPE |
| atmInterfaceTCEntry | OBJECT-TYPE |
| atmVclEntry | OBJECT-TYPE |
| atmVclVci | OBJECT-TYPE |
| atmVclVpi | OBJECT-TYPE |
| atmVplEntry | OBJECT-TYPE |
| atmVplVpi | OBJECT-TYPE |
From ATM-TC-MIB
| AtmConnCastType | |
| AtmConnKind | |
| AtmTrafficDescrParamIndex | |
| AtmVcIdentifier | |
| AtmVorXAdminStatus | |
| AtmVorXLastChange | |
| AtmVorXOperStatus | |
| AtmVpIdentifier |
From IF-MIB
| ifIndex | OBJECT-TYPE |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TimeStamp |
From TIMETRA-CHASSIS-MIB
| tmnxCardSlotNum | OBJECT-TYPE |
| tmnxChassisIndex | OBJECT-TYPE |
| tmnxMDASlotNum | OBJECT-TYPE |
| tmnxConnProfId | OBJECT-TYPE |
From TIMETRA-GLOBAL-MIB
| timetraSRMIBModules | OBJECT-IDENTITY |
| tmnxSRConfs | OBJECT-IDENTITY |
| tmnxSRNotifyPrefix | OBJECT-IDENTITY |
| tmnxSRObjs | OBJECT-IDENTITY |
How to Use in IPNetwork Monitor
Example using tAtmIntfStatsTotalCellsRxd OID:
Select a Nokia/Alcatel-Lucent 7750 SR router as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type tAtmIntfStatsTotalCellsRxd into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The value of tAtmIntfStatsTotalCellsRxd indicates the number of valid ATM cells received by the ATM interface including both CLP=0 and CLP=1 cells. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| timetraATMMIBModule | 1.3.6.1.4.1.6527.1.1.3.27 | This document is the SNMP MIB module to manage and provision ATM functionality for the Alcatel-Lucent SROS device. This includes extensions to the AToM MIB defined in RFC 2515 to allow statistics retrieval as well as extensions to the ILMI link attributes. Copyright 2003-2011 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions. Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. | ||
| tAtmMIBConformance | 1.3.6.1.4.1.6527.3.1.1.27 | |||
| tmnxAtmMIBCompliances | 1.3.6.1.4.1.6527.3.1.1.27.1 | |||
| tAtmMIBV4v0Compliance | 1.3.6.1.4.1.6527.3.1.1.27.1.3 | The compliance statement for revision 4.0 of TIMETRA-ATM-MIB. | ||
| tAtmMIBV9v0Compliance | 1.3.6.1.4.1.6527.3.1.1.27.1.4 | The compliance statement for revision 9.0 of TIMETRA-ATM-MIB. | ||
| tmnxAtmMIBGroups | 1.3.6.1.4.1.6527.3.1.1.27.2 | |||
| tmnxAtmVclInfoGroup | 1.3.6.1.4.1.6527.3.1.1.27.2.6 | The group of objects providing for management access of ATM VCL status information on Alcatel-Lucent SROS series systems. | ||
| tmnxAtmVclStatisticsGroup | 1.3.6.1.4.1.6527.3.1.1.27.2.7 | The group of objects providing for management access of ATM VCL statistics on Alcatel-Lucent SROS series systems. | ||
| tmnxAtmAal5VccStatisticsGroup | 1.3.6.1.4.1.6527.3.1.1.27.2.8 | The group of objects providing for management access of AAL-5 VCC statistics on Alcatel-Lucent SROS series systems. | ||
| tmnxAtmCellVclStatisticsGroup | 1.3.6.1.4.1.6527.3.1.1.27.2.9 | The group of objects providing for management access of cell mode VCC statistics on Alcatel-Lucent SROS series systems. | ||
| tmnxAtmVplInfoGroup | 1.3.6.1.4.1.6527.3.1.1.27.2.11 | The group of objects providing for management access of ATM VPL status information on Alcatel-Lucent SROS series systems. | ||
| tmnxAtmVplStatisticsGroup | 1.3.6.1.4.1.6527.3.1.1.27.2.12 | The group of objects providing for management access of ATM VPL statistics on Alcatel-Lucent SROS series systems. | ||
| tmnxAtmVtlInfoGroup | 1.3.6.1.4.1.6527.3.1.1.27.2.13 | The group of objects providing for management access of ATM VTL status information on Alcatel-Lucent SROS series systems. | ||
| tmnxAtmVtlStatisticsGroup | 1.3.6.1.4.1.6527.3.1.1.27.2.14 | The group of objects providing for management access of ATM VTL statistics on Alcatel-Lucent SROS series systems. | ||
| tmnxAtmIfcInfoGroup | 1.3.6.1.4.1.6527.3.1.1.27.2.15 | The group of objects providing for management access of ATM IFC status information on Alcatel-Lucent SROS series systems. | ||
| tmnxAtmIfcStatisticsGroup | 1.3.6.1.4.1.6527.3.1.1.27.2.16 | The group of objects providing for management access of ATM IFC statistics on Alcatel-Lucent SROS series systems. | ||
| tmnxAtmObsoleteV3v0Group | 1.3.6.1.4.1.6527.3.1.1.27.2.17 | The group of objects providing made obsolete in the 3.0 release | ||
| tmnxAtmIlmiLinkGroup | 1.3.6.1.4.1.6527.3.1.1.27.2.20 | The group of objects providing for management of each ILMI link on Alcatel-Lucent SROS series systems. | ||
| tmnxAtmIlmiStatisticsGroup | 1.3.6.1.4.1.6527.3.1.1.27.2.21 | The group of objects providing for management access of ILMI statistics on Alcatel-Lucent SROS series systems. | ||
| tmnxAtmNotificationsR4r0Group | 1.3.6.1.4.1.6527.3.1.1.27.2.22 | The group of notifications providing for indications of ATM-related events on Alcatel-Lucent SROS series systems. | ||
| tmnxAtmIntfConfV4v0Group | 1.3.6.1.4.1.6527.3.1.1.27.2.23 | The group of objects providing for management of each ATM interface on Alcatel-Lucent SROS series systems release 4.0. | ||
| tmnxAtmSysConfV4v0Group | 1.3.6.1.4.1.6527.3.1.1.27.2.24 | The group of objects providing for management access of ATM system level configurations on Alcatel-Lucent SROS series systems release 4.0. | ||
| tmnxAtmIntfStatsV4v0Group | 1.3.6.1.4.1.6527.3.1.1.27.2.25 | The group of objects providing for management access of ATM interface statistics on Alcatel-Lucent SROS series systems release 4.0. | ||
| tmnxAtmTCSublayerGroup | 1.3.6.1.4.1.6527.3.1.1.27.2.26 | The group of objects providing for management access of an ATM TC Sublayer on Alcatel-Lucent SROS series systems. | ||
| tmnxAtmObsoleteV4v0Group | 1.3.6.1.4.1.6527.3.1.1.27.2.27 | The group of objects providing made obsolete in the 4.0 release | ||
| tmnxAtmCpStatisticsGroup | 1.3.6.1.4.1.6527.3.1.1.27.2.28 | The group of objects providing for management access of ATM CP statistics on Alcatel-Lucent SROS series systems. | ||
| tmnxAtmVclInfoGroupV9v0 | 1.3.6.1.4.1.6527.3.1.1.27.2.29 | The group of objects providing for management access of ATM VCL status information that were added in release 9.0 of Alcatel-Lucent SROS series systems. | ||
| tAtmObjs | 1.3.6.1.4.1.6527.3.1.2.27 | |||
| tAtmMdaObjs | 1.3.6.1.4.1.6527.3.1.2.27.1 | |||
| tAtmMdaInfoTable | 1.3.6.1.4.1.6527.3.1.2.27.1.1 | not-accessible | The tAtmMdaInfoTable contains ATM MDA status information. This table is obsoleted in release 3.0. | |
| tAtmMdaInfoEntry | 1.3.6.1.4.1.6527.3.1.2.27.1.1.1 | not-accessible | An entry in the tAtmMdaInfoEntry containing status information applicable to an ATM MDA. This entry is obsoleted in release 3.0. | |
| INT tAtmMdaMaxSupportedVpcs | 1.3.6.1.4.1.6527.3.1.2.27.1.1.1.1 | INTEGER | read-only | The value of tAtmMdaMaxSupportedVpcs indicates the maximum number of ATM VPCs that can be configured on this MDA. This object is obsoleted in release 3.0. |
| INT tAtmMdaMaxSupportedVccs | 1.3.6.1.4.1.6527.3.1.2.27.1.1.1.2 | INTEGER | read-only | The value of tAtmMdaMaxSupportedVccs indicates the maximum number of ATM VCCs that can be configured on this MDA. This object is obsoleted in release 3.0. |
| INT tAtmMdaConfiguredVpcs | 1.3.6.1.4.1.6527.3.1.2.27.1.1.1.3 | INTEGER | read-only | The value of tAtmMdaConfiguredVpcs indicates the number of ATM VPCs that have been configured on this MDA. This object is obsoleted in release 3.0. |
| INT tAtmMdaConfiguredVccs | 1.3.6.1.4.1.6527.3.1.2.27.1.1.1.4 | INTEGER | read-only | The value of tAtmMdaConfiguredVccs indicates the number of ATM VCCs that have been configured on this MDA. This object is obsoleted in release 3.0. |
| tAtmIntfObjs | 1.3.6.1.4.1.6527.3.1.2.27.2 | |||
| tAtmIntfConfTable | 1.3.6.1.4.1.6527.3.1.2.27.2.1 | not-accessible | The tAtmIntfConfTable contains ATM interface configuration and status not included in the AToM MIB definition in RFC 2515. | |
| tAtmIntfConfEntry | 1.3.6.1.4.1.6527.3.1.2.27.2.1.1 | not-accessible | An entry in the tAtmIntfConfEntry containing additional configuration and status information applicable to an ATM interface. | |
| INT tAtmIntfCurrentMaxVpcs | 1.3.6.1.4.1.6527.3.1.2.27.2.1.1.1 | INTEGER | read-only | The value of tAtmIntfCurrentMaxVpcs indicates the maximum number of VPCs that may be currently configured on this ATM interface. The value is the minimum of atmInterfaceMaxVpcs, and the atmInterfaceMaxVpcs of the interface's UNI/NNI peer as negotiated by ILMI. If the interface does not negotiate with its peer to determine the number of VPCs that can be configured on the interface, then the value of this object must equal atmInterfaceMaxVpcs. |
| INT tAtmIntfCurrentMaxVccs | 1.3.6.1.4.1.6527.3.1.2.27.2.1.1.2 | INTEGER | read-only | The value of tAtmIntfCurrentMaxVccs indicates the maximum number of VCCs that may be currently supported on this ATM interface. The value is the minimum of atmInterfaceMaxVccs, and the atmInterfaceMaxVccs of the interface's UNI/NNI peer as negotiated by ILMI. If the interface does not negotiate with its peer to determine the number of VCCs that can be configured on the interface, then the value of this object must equal atmInterfaceMaxVccs. |
| U32 tAtmIntfTotalIngrCbrBandwidth | 1.3.6.1.4.1.6527.3.1.2.27.2.1.1.3 | Unsigned32 | read-only | The value of tAtmIntfTotalIngrCbrBandwidth indicates the total Cbr bandwidth consumed on this interface in the ingress direction. |
| U32 tAtmIntfTotalIngrRtVbrBandwidth | 1.3.6.1.4.1.6527.3.1.2.27.2.1.1.4 | Unsigned32 | read-only | The value of tAtmIntfTotalIngrRtVbrBandwidth indicates the total rtVbr bandwidth consumed on this interface in the ingress direction. |
| U32 tAtmIntfTotalIngrNrtVbrBandwidth | 1.3.6.1.4.1.6527.3.1.2.27.2.1.1.5 | Unsigned32 | read-only | The value of tAtmIntfTotalIngrNrtVbrBandwidth indicates the total nrtVbr bandwidth consumed on this interface in the ingress direction. |
| U32 tAtmIntfTotalIngrUbrBandwidth | 1.3.6.1.4.1.6527.3.1.2.27.2.1.1.6 | Unsigned32 | read-only | The value of tAtmIntfTotalIngrUbrBandwidth indicates the total Ubr bandwidth consumed on this interface in the ingress direction. |
| U32 tAtmIntfTotalEgrCbrBandwidth | 1.3.6.1.4.1.6527.3.1.2.27.2.1.1.7 | Unsigned32 | read-only | The value of tAtmIntfTotalEgrCbrBandwidth indicates the total Cbr bandwidth consumed on this interface in the egress direction. |
| U32 tAtmIntfTotalEgrRtVbrBandwidth | 1.3.6.1.4.1.6527.3.1.2.27.2.1.1.8 | Unsigned32 | read-only | The value of tAtmIntfTotalEgrRtVbrBandwidth indicates tje total rtVbr bandwidth consumed on this interface in the egress direction. |
| U32 tAtmIntfTotalEgrNrtVbrBandwidth | 1.3.6.1.4.1.6527.3.1.2.27.2.1.1.9 | Unsigned32 | read-only | The value of tAtmIntfTotalEgrNrtVbrBandwidth indicates the total nrtVbr bandwidth consumed on this interface in the egress direction. |
| U32 tAtmIntfTotalEgrUbrBandwidth | 1.3.6.1.4.1.6527.3.1.2.27.2.1.1.10 | Unsigned32 | read-only | The value of tAtmIntfTotalEgrUbrBandwidth indicates the total Ubr bandwidth consumed on this interface in the egress direction. |
| U32 tAtmIntfBandwidth | 1.3.6.1.4.1.6527.3.1.2.27.2.1.1.11 | Unsigned32 | read-only | The value of tAtmIntfBandwidth indicates the total ATM link bandwidth accepted on this interface. |
| U32 tAtmIntfShapedBandwidth | 1.3.6.1.4.1.6527.3.1.2.27.2.1.1.12 | Unsigned32 | read-only | The value of tAtmIntfShapedBandwidth indicates the total shaped bandwidth consumed on this interface in the egress direction. |
| OID tAtmIntfLastUnknVpi | 1.3.6.1.4.1.6527.3.1.2.27.2.1.1.13 | AtmVpIdentifier | read-only | The value of tAtmIntfLastUnknVpi indicates the last unknown Vpi that was received on this interface. |
| OID tAtmIntfLastUnknVci | 1.3.6.1.4.1.6527.3.1.2.27.2.1.1.14 | AtmVcIdentifier | read-only | The value of tAtmIntfLastUnknVci indicates the last unknown vci that was received on this interface. |
| INT tAtmIntfOperStatus | 1.3.6.1.4.1.6527.3.1.2.27.2.1.1.15 | INTEGER | read-only | The value of tAtmIntfOperStatus indicates the status of the ATM interface. If the SONET-PATH layer and TC Sublayer are operationally up, the ATM Interface is considered up. If the SONET-PATH layer and/or TC Sublayer is down, the ATM Interface is set to lowerLayerDown. |
| INT tAtmIntfConfVtcs | 1.3.6.1.4.1.6527.3.1.2.27.2.1.1.16 | INTEGER | read-only | The value of tAtmIntfConfVtcs indicates the number of VTCs currently in use at this ATM interface. |
| INT tAtmIntfConfIfcs | 1.3.6.1.4.1.6527.3.1.2.27.2.1.1.17 | INTEGER | read-only | The value of tAtmIntfConfIfcs indicates the number of IFCs currently in use at this ATM interface. |
| tAtmIntfStatsTable | 1.3.6.1.4.1.6527.3.1.2.27.2.2 | not-accessible | The tAtmIntfStatsTable contains ATM interface stats at the ATM Layer. | |
| tAtmIntfStatsEntry | 1.3.6.1.4.1.6527.3.1.2.27.2.2.1 | not-accessible | An entry in the tAtmIntfStatsEntry containing statistics information applicable to an ATM interface. | |
| C64 tAtmIntfStatsTotalCellsRxdEx | 1.3.6.1.4.1.6527.3.1.2.27.2.2.1.1 | Counter64 | read-only | The value of tAtmIntfStatsTotalCellsRxd indicates the number of valid ATM cells received by the ATM interface including both CLP=0 and CLP=1 cells. If traffic policing is implemented, then cells are counted prior to the application of traffic policing. |
| C64 tAtmIntfStatsTotalCellsTxd | 1.3.6.1.4.1.6527.3.1.2.27.2.2.1.2 | Counter64 | read-only | The value of tAtmIntfStatsTotalCellsTxd indicates the number of valid ATM cells transmitted by the ATM interface including both CLP=0 and CLP=1 cells. |
| C64 tAtmIntfStatsTotalBytesRxd | 1.3.6.1.4.1.6527.3.1.2.27.2.2.1.3 | Counter64 | read-only | The value of tAtmIntfStatsTotalBytesRxd indicates the number of bytes received on this interface. This is the number of tAtmIntfStatsTotalCellsRxd multiplied by 53. |
| C64 tAtmIntfStatsTotalBytesTxd | 1.3.6.1.4.1.6527.3.1.2.27.2.2.1.4 | Counter64 | read-only | The value of tAtmIntfStatsTotalBytesTxd indicates the number of bytes transmitted on this interface. This is the number of tAtmIntfStatsTotalCellsTxd multiplied by 53. |
| C32 tAtmIntfStatsTotalUnknCellsDrp | 1.3.6.1.4.1.6527.3.1.2.27.2.2.1.5 | Counter32 | read-only | The value of tAtmIntfStatsTotalUnknCellsDrp indicates the number of cells dropped due to an unknown VPI/VCI. |
| C32 tAtmIntfStatsTotalHecErr | 1.3.6.1.4.1.6527.3.1.2.27.2.2.1.6 | Counter32 | read-only | The value of tAtmIntfStatsTotalHecErr indicates the number of cells with uncorrectable HEC Errors on this interface. |
| C32 tAtmIntfStatsTotalHecErrFixed | 1.3.6.1.4.1.6527.3.1.2.27.2.2.1.7 | Counter32 | read-only | The value of tAtmIntfStatsTotalHecErrFixed indicates the number of cells with correctable HEC Errors on this interface. |
| tAtmIntfAal5StatsTable | 1.3.6.1.4.1.6527.3.1.2.27.2.3 | not-accessible | The tAtmIntfAal5StatsTable contains ATM interface stats at the AAL5 Layer. | |
| tAtmIntfAal5StatsEntry | 1.3.6.1.4.1.6527.3.1.2.27.2.3.1 | not-accessible | An entry in the tAtmIntfAal5StatsEntry containing statistics information applicable to an ATM interface at the AAL5 Layer. | |
| C64 tAtmIntfAal5StatsTotalPktsRxd | 1.3.6.1.4.1.6527.3.1.2.27.2.3.1.1 | Counter64 | read-only | The value of tAtmIntfAal5StatsTotalPktsRxd indicates the number of AAL5 PDUs that are received by the ATM interface. |
| C64 tAtmIntfAal5StatsTotalPktsTxd | 1.3.6.1.4.1.6527.3.1.2.27.2.3.1.2 | Counter64 | read-only | The value of tAtmIntfAal5StatsTotalPktsTxd indicates the number of AAL5 PDUs that are transmitted by the ATM interface. |
| C64 tAtmIntfAal5StatsTotalPktsDrpRxd | 1.3.6.1.4.1.6527.3.1.2.27.2.3.1.3 | Counter64 | read-only | The value of tAtmIntfAal5StatsTotalPktsDrpRxd indicates the number of AAL5 PDUs dropped by the ATM interface in the receive direction. This count does not include crc32 Errors or oversized SDU discards |
| C64 tAtmIntfAal5StatsTotalPktsDrpTxd | 1.3.6.1.4.1.6527.3.1.2.27.2.3.1.4 | Counter64 | read-only | The value of tAtmIntfAal5StatsTotalPktsDrpTxd indicates the number of AAL5 PDUs dropped in the transmit direction. This count does not include crc32 Errors or oversized SDU discards. |
| C64 tAtmIntfAal5StatsTotalCrc32Err | 1.3.6.1.4.1.6527.3.1.2.27.2.3.1.5 | Counter64 | read-only | The value of tAtmIntfAal5StatsTotalCrc32Err indicates the number of Errors detected by the 32 bit cyclic redundancy check. |
| tAtmIfcInfoTable | 1.3.6.1.4.1.6527.3.1.2.27.2.4 | not-accessible | The tAtmIfcInfoTable contains configuration and status information for ATM interface-level connections. | |
| tAtmIfcInfoEntry | 1.3.6.1.4.1.6527.3.1.2.27.2.4.1 | not-accessible | An entry in the tAtmIfcInfoTable containing configuration and status information applicable to ATM interface-level connections. | |
| ATM tAtmIfcAdminStatus | 1.3.6.1.4.1.6527.3.1.2.27.2.4.1.1 | AtmVorXAdminStatus | read-only | tAtmIfcAdminStatus specifies the desired administrative state of the IFC. |
| ATM tAtmIfcOperStatus | 1.3.6.1.4.1.6527.3.1.2.27.2.4.1.2 | AtmVorXOperStatus | read-only | tAtmIfcOperStatus indicates the current operational status of the IFC. |
| ATM tAtmIfcLastChange | 1.3.6.1.4.1.6527.3.1.2.27.2.4.1.3 | AtmVorXLastChange | read-only | tAtmIfcLastChange indicates the value of sysUpTime at the time this IFC entered its current operational state. |
| ATM tAtmIfcReceiveTrafficDescrIndex | 1.3.6.1.4.1.6527.3.1.2.27.2.4.1.4 | AtmTrafficDescrParamIndex | read-only | tAtmIfcReceiveTrafficDescrIndex identifies the row in the atmTrafficDescrParamTable which applies to the receive direction of the IFC. |
| ATM tAtmIfcTransmitTrafficDescrIndex | 1.3.6.1.4.1.6527.3.1.2.27.2.4.1.5 | AtmTrafficDescrParamIndex | read-only | tAtmIfcTransmitTrafficDescrIndex identifies the row in the atmTrafficDescrParamTable which applies to the transmit direction of the IFC. |
| ROW tAtmIfcRowStatus | 1.3.6.1.4.1.6527.3.1.2.27.2.4.1.6 | RowStatus | read-only | tAtmIfcRowStatus indicates the current RowStatus of the IFC. Entries in the tAtmIfcInfoTable are created as a result of the creation of another system entity (such as a SAP). Since entries in this table can not be created directly, tAtmIfcRowStatus is read-only and will always be 'active' if the row exists. |
| ATM tAtmIfcCastType | 1.3.6.1.4.1.6527.3.1.2.27.2.4.1.7 | AtmConnCastType | read-only | tAtmIfcCastType indicates the connection topology type. |
| ATM tAtmIfcConnKind | 1.3.6.1.4.1.6527.3.1.2.27.2.4.1.8 | AtmConnKind | read-only | The value of tAtmIfcConnKind indicates the use of call control. |
| ATM tAtmIfcInfoOwner | 1.3.6.1.4.1.6527.3.1.2.27.2.4.1.9 | AtmConnectionOwner | read-only | The value of tAtmIfcInfoOwner indicates which application caused the creation of the ATM interface-level connection. |
| tAtmIfcStatisticsTable | 1.3.6.1.4.1.6527.3.1.2.27.2.5 | not-accessible | The tAtmIfcStatisticsTable is used to gather cell-level statistics on a particular IFC entry. | |
| tAtmIfcStatisticsEntry | 1.3.6.1.4.1.6527.3.1.2.27.2.5.1 | not-accessible | An entry in the tAtmIfcStatisticsTable containing statistics information applicable to a particular IFC entry. | |
| C64 tAtmIfcStatsTotalCellsRxd | 1.3.6.1.4.1.6527.3.1.2.27.2.5.1.1 | Counter64 | read-only | The value of tAtmIfcStatsTotalCellsRxd indicates the number of valid ATM cells received by the IFC including both CLP=0 and CLP=1 cells. If traffic policing is implemented, then cells are counted prior to the application of traffic policing. |
| C64 tAtmIfcStatsTotalClp0CellsRxd | 1.3.6.1.4.1.6527.3.1.2.27.2.5.1.2 | Counter64 | read-only | The value of tAtmIfcStatsTotalClp0CellsRxd indicates the number of valid ATM CLP=0 cells received by the IFC. If traffic policing is implemented, then cells are counted prior to the application of traffic policing. |
| C64 tAtmIfcStatsTotalCellsTxd | 1.3.6.1.4.1.6527.3.1.2.27.2.5.1.3 | Counter64 | read-only | The value of tAtmIfcStatsTotalCellsTxd indicates the number of valid ATM cells transmitted by the IFC including both CLP=0 and CLP=1 cells. If traffic policing is implemented, then cells are counted prior to the application of traffic policing. |
| C64 tAtmIfcStatsTotalClp0CellsTxd | 1.3.6.1.4.1.6527.3.1.2.27.2.5.1.4 | Counter64 | read-only | The value of tAtmIfcStatsTotalClp0CellsTxd indicates the number of valid ATM CLP=0 cells transmitted by the IFC. If traffic policing is implemented, then cells are counted prior to the application of traffic policing. |
| C64 tAtmIfcStatsTotalBytesRxd | 1.3.6.1.4.1.6527.3.1.2.27.2.5.1.5 | Counter64 | read-only | The value of tAtmIfcStatsTotalBytesRxd indicates the number of bytes received by this IFC. This is the number of tAtmIfcStatsTotalCellsRxd multiplied by 53. |
| C64 tAtmIfcStatsTotalBytesTxd | 1.3.6.1.4.1.6527.3.1.2.27.2.5.1.6 | Counter64 | read-only | The value of tAtmIfcStatsTotalBytesTxd indicates the number of bytes transmitted by this IFC. This is the number of tAtmIfcStatsTotalCellsTxd multiplied by 53. |
| C32 tAtmIfcStatsDrpCellsRxd | 1.3.6.1.4.1.6527.3.1.2.27.2.5.1.7 | Counter32 | read-only | The value of tAtmIfcStatsDrpCellsRxd indicates the number of all policer cells discards (CLP=0+1) of the IFC. This excludes any buffer management discards (if applicable). |
| C32 tAtmIfcStatsDrpClp0CellsRxd | 1.3.6.1.4.1.6527.3.1.2.27.2.5.1.8 | Counter32 | read-only | The value of tAtmIfcStatsDrpClp0CellsRxd indicates the number of all policer CLP=0 cells discards of the IFC. This excludes any buffer management discards (if applicable). |
| C32 tAtmIfcStatsDrpClp0CellsTxd | 1.3.6.1.4.1.6527.3.1.2.27.2.5.1.9 | Counter32 | read-only | The value of tAtmIfcStatsDrpClp0CellsTxd indicates the number of all CLP=0 cells discards of this IFC. This includes both discards due to buffer management and policer. |
| C32 tAtmIfcStatsTagCells | 1.3.6.1.4.1.6527.3.1.2.27.2.5.1.10 | Counter32 | read-only | The value of tAtmIfcStatsTagCells indicates the number of tagged CLP=0 cells of the IFC. The egress may or may not discard these cells. |
| tAtmVclObjs | 1.3.6.1.4.1.6527.3.1.2.27.3 | |||
| tAtmVclInfoTable | 1.3.6.1.4.1.6527.3.1.2.27.3.1 | not-accessible | The tAtmVclInfoTable is used to display non-configuration information on a particular VCL entry in the RFC 2515 AToM MIB. | |
| tAtmVclInfoEntry | 1.3.6.1.4.1.6527.3.1.2.27.3.1.1 | not-accessible | An entry in the tAtmVclInfoTable containing non-configuration information applicable to a particular VCL entry in the AToM MIB. | |
| ATM tAtmVclInfoOwner | 1.3.6.1.4.1.6527.3.1.2.27.3.1.1.1 | AtmConnectionOwner | read-only | The value of tAtmVclInfoOwner indicates which application caused the creation of the ATM VCL. |
| ATM tAtmVclInfoOamStatus | 1.3.6.1.4.1.6527.3.1.2.27.3.1.1.2 | AtmOamStatus | read-only | The value of tAtmVclInfoOamStatus indicates the OAM operational status of the VCL. |
| ATM tAtmVclInfoIlmiStatus | 1.3.6.1.4.1.6527.3.1.2.27.3.1.1.3 | AtmIlmiStatus | read-only | The value of tAtmVclInfoIlmiStatus indicates the ILMI status of the VCL. |
| ATM tAtmVclInfoRxTrafficDescrIdOvr | 1.3.6.1.4.1.6527.3.1.2.27.3.1.1.4 | AtmTrafficDescrParamIndex | read-only | This object indicates the index of the ATM ingress traffic descriptor override. This override value is given by an AAA server such as a RADIUS server. The value zero indicates that no override is given. |
| ATM tAtmVclInfoTxTrafficDescrIdOvr | 1.3.6.1.4.1.6527.3.1.2.27.3.1.1.5 | AtmTrafficDescrParamIndex | read-only | This object indicates the index of the ATM egress traffic descriptor override. This override value is given by an AAA server such as a RADIUS server. The value zero indicates that no override is given. |
| tAtmVclStatisticsTable | 1.3.6.1.4.1.6527.3.1.2.27.3.2 | not-accessible | The tAtmVclStatisticsTable is used to gather cell-level statistics on a particular VCL entry in the RFC 2515 AToM MIB. | |
| tAtmVclStatisticsEntry | 1.3.6.1.4.1.6527.3.1.2.27.3.2.1 | not-accessible | An entry in the tAtmVclStatisticsTable containing statistics information applicable to a particular VCL entry in the AToM MIB. | |
| C64 tAtmVclStatsTotalCellsRxd | 1.3.6.1.4.1.6527.3.1.2.27.3.2.1.1 | Counter64 | read-only | The value of tAtmVclStatsTotalCellsRxd indicates the number of valid ATM cells received by the VCL including both CLP=0 and CLP=1 cells. If traffic policing is implemented, then cells are counted prior to the application of traffic policing. |
| C64 tAtmVclStatsTotalCellsTxd | 1.3.6.1.4.1.6527.3.1.2.27.3.2.1.2 | Counter64 | read-only | The value of tAtmVclStatsTotalCellsTxd indicates the number of valid ATM cells transmitted by the VCL including both CLP=0 and CLP=1 cells. If traffic policing is implemented, then cells are counted prior to the application of traffic policing. |
| C64 tAtmVclStatsTotalBytesRxd | 1.3.6.1.4.1.6527.3.1.2.27.3.2.1.3 | Counter64 | read-only | The value of tAtmVclStatsTotalBytesRxd indicates the number of bytes received by this Vcl. This is the number of tAtmVclStatsTotalCellsRxd multiplied by 53. |
| C64 tAtmVclStatsTotalBytesTxd | 1.3.6.1.4.1.6527.3.1.2.27.3.2.1.4 | Counter64 | read-only | The value of tAtmVclStatsTotalBytesTxd indicates the number of bytes transmitted by this Vcl. This is the number of tAtmVclStatsTotalCellsTxd multiplied by 53. |
| tAtmOamVclStatisticsTable | 1.3.6.1.4.1.6527.3.1.2.27.3.3 | not-accessible | The tAtmOamVclStatisticsTable is used to gather oam statistics on a particular VCL entry in the RFC 2515 AToM MIB. | |
| tAtmOamVclStatisticsEntry | 1.3.6.1.4.1.6527.3.1.2.27.3.3.1 | not-accessible | An entry in the tAtmVclStatisticsTable containing statistics information applicable to a particular VCL entry in the AToM MIB. | |
| C32 tAtmOamVclStatsAISCellsTxd | 1.3.6.1.4.1.6527.3.1.2.27.3.3.1.1 | Counter32 | read-only | The value of tAtmOamVclStatsAISCellsTxd indicates the number of AIS cells transmitted on this VC for both end to end and segment. |
| C32 tAtmOamVclStatsRDICellsTxd | 1.3.6.1.4.1.6527.3.1.2.27.3.3.1.2 | Counter32 | read-only | The value of tAtmOamVclStatsRDICellsTxd indicates the number of RDI cells transmitted on this VC for both end to end and segment. |
| C32 tAtmOamVclStatsLoopbackCellsTxd | 1.3.6.1.4.1.6527.3.1.2.27.3.3.1.3 | Counter32 | read-only | The value of tAtmOamVclStatsLoopbackCellsTxd indicates the number of loopback requests and responses transmitted on this VC for both end to end and segment. |
| C32 tAtmOamVclStatsAISCellsRxd | 1.3.6.1.4.1.6527.3.1.2.27.3.3.1.4 | Counter32 | read-only | The value of tAtmOamVclStatsAISCellsRxd indicates the number of AIS cells received on this VC for both end to end and segment. |
| C32 tAtmOamVclStatsRDICellsRxd | 1.3.6.1.4.1.6527.3.1.2.27.3.3.1.5 | Counter32 | read-only | The value of tAtmOamVclStatsRDICellsRxd indicates the number of RDI cells received on this VC for both end to end and segment. |
| C32 tAtmOamVclStatsLoopbackCellsRxd | 1.3.6.1.4.1.6527.3.1.2.27.3.3.1.6 | Counter32 | read-only | The value of tAtmOamVclStatsLoopbackCellsRxd indicates the number of loopback requests and responses received on this VC for both end to end and segment. |
| C32 tAtmOamVclStatsCrc10Err | 1.3.6.1.4.1.6527.3.1.2.27.3.3.1.7 | Counter32 | read-only | The value of tAtmOamVclStatsCrc10Err indicates the number of oam cells discarded with CRC 10 Errors. |
| C32 tAtmOamVclStatsOtherCellsRxd | 1.3.6.1.4.1.6527.3.1.2.27.3.3.1.8 | Counter32 | read-only | This value of tAtmOamVclStatsOtherCellsRxd indicates the number of oam cells that are received but not identified. |
| tAal5VccObjs | 1.3.6.1.4.1.6527.3.1.2.27.4 | |||
| tAal5VccStatisticsTable | 1.3.6.1.4.1.6527.3.1.2.27.4.1 | not-accessible | tAal5VccStatisticsTable is used to gather AAL5-level statistics on a particular AAL5 VCC entry in the RFC 2515 AToM MIB. | |
| tAal5VccStatisticsEntry | 1.3.6.1.4.1.6527.3.1.2.27.4.1.1 | not-accessible | An entry in the tAal5VccStatisticsTable containing statistics information applicable to a particular AAL5 VCC entry in the AToM MIB. | |
| C64 tAal5VccStatsPacketsRxd | 1.3.6.1.4.1.6527.3.1.2.27.4.1.1.1 | Counter64 | read-only | The value of tAal5VccStatsPacketsRxd indicates the number of valid AAL-5 SDUs and AAL-5 SDUs with CRC-32 errors received by the AAL-5 VCC. |
| C64 tAal5VccStatsPacketsTxd | 1.3.6.1.4.1.6527.3.1.2.27.4.1.1.2 | Counter64 | read-only | The value of tAal5VccStatsPacketsTxd indicates the number of AAL-5 SDUs transmitted by the AAL-5 VCC. |
| C64 tAal5VccStatsDrpPacketsRxd | 1.3.6.1.4.1.6527.3.1.2.27.4.1.1.3 | Counter64 | read-only | The value of tAal5VccStatsDrpPacketsRxd indicates the number of dropped AAL-5 SDUs that have been received on the AAL-5 VCC. |
| C64 tAal5VccStatsDrpPacketsTxd | 1.3.6.1.4.1.6527.3.1.2.27.4.1.1.4 | Counter64 | read-only | The value of tAal5VccStatsDrpPacketsTxd indicates the number of dropped AAL-5 SDUs that would have been transmitted on the AAL-5 VCC. |
| tAtmTrafficDescObjs | 1.3.6.1.4.1.6527.3.1.2.27.5 | |||
| tAtmVplObjs | 1.3.6.1.4.1.6527.3.1.2.27.6 | |||
| tAtmVplInfoTable | 1.3.6.1.4.1.6527.3.1.2.27.6.1 | not-accessible | The tAtmVplInfoTable is used to display non-configuration information on a particular VPL entry in the RFC 2515 AToM MIB. | |
| tAtmVplInfoEntry | 1.3.6.1.4.1.6527.3.1.2.27.6.1.1 | not-accessible | An entry in the tAtmVplInfoTable containing non-configuration information applicable to a particular VPL entry in the AToM MIB. | |
| ATM tAtmVplInfoOwner | 1.3.6.1.4.1.6527.3.1.2.27.6.1.1.1 | AtmConnectionOwner | read-only | The value of tAtmVplInfoOwner indicates which application caused the creation of the ATM VPL. |
| ATM tAtmVplInfoOamStatus | 1.3.6.1.4.1.6527.3.1.2.27.6.1.1.2 | AtmOamStatus | read-only | The value of tAtmVplInfoOamStatus indicates the OAM operational status of the VPL. |
| ATM tAtmVplInfoIlmiStatus | 1.3.6.1.4.1.6527.3.1.2.27.6.1.1.3 | AtmIlmiStatus | read-only | The value of tAtmVplInfoIlmiStatus indicates the ILMI status of the VPL. |
| tAtmVplStatisticsTable | 1.3.6.1.4.1.6527.3.1.2.27.6.2 | not-accessible | The tAtmVplStatisticsTable is used to gather cell-level statistics on a particular VPL entry in the RFC 2515 AToM MIB. | |
| tAtmVplStatisticsEntry | 1.3.6.1.4.1.6527.3.1.2.27.6.2.1 | not-accessible | An entry in the tAtmVplStatisticsTable containing statistics information applicable to a particular VPL entry in the AToM MIB. | |
| C64 tAtmVplStatsTotalCellsRxd | 1.3.6.1.4.1.6527.3.1.2.27.6.2.1.1 | Counter64 | read-only | The value of tAtmVplStatsTotalCellsRxd indicates the number of valid ATM cells received by the VPL including both CLP=0 and CLP=1 cells. If traffic policing is implemented, then cells are counted prior to the application of traffic policing. |
| C64 tAtmVplStatsTotalClp0CellsRxd | 1.3.6.1.4.1.6527.3.1.2.27.6.2.1.2 | Counter64 | read-only | The value of tAtmVplStatsTotalClp0CellsRxd indicates the number of valid ATM CLP=0 cells received by the VPL. If traffic policing is implemented, then cells are counted prior to the application of traffic policing. |
| C64 tAtmVplStatsTotalCellsTxd | 1.3.6.1.4.1.6527.3.1.2.27.6.2.1.3 | Counter64 | read-only | The value of tAtmVplStatsTotalCellsTxd indicates the number of valid ATM cells transmitted by the VPL including both CLP=0 and CLP=1 cells. If traffic policing is implemented, then cells are counted prior to the application of traffic policing. |
| C64 tAtmVplStatsTotalClp0CellsTxd | 1.3.6.1.4.1.6527.3.1.2.27.6.2.1.4 | Counter64 | read-only | The value of tAtmVplStatsTotalClp0CellsTxd indicates the number of valid ATM CLP=0 cells transmitted by the VPL. If traffic policing is implemented, then cells are counted prior to the application of traffic policing. |
| C64 tAtmVplStatsTotalBytesRxd | 1.3.6.1.4.1.6527.3.1.2.27.6.2.1.5 | Counter64 | read-only | The value of tAtmVplStatsTotalBytesRxd indicates the number of bytes received by this VPL. This is the number of tAtmVplStatsTotalCellsRxd multiplied by 53. |
| C64 tAtmVplStatsTotalBytesTxd | 1.3.6.1.4.1.6527.3.1.2.27.6.2.1.6 | Counter64 | read-only | The value of tAtmVplStatsTotalBytesTxd indicates the number of bytes transmitted by this VPL. This is the number of tAtmVplStatsTotalCellsTxd multiplied by 53. |
| C32 tAtmVplStatsDrpCellsRxd | 1.3.6.1.4.1.6527.3.1.2.27.6.2.1.7 | Counter32 | read-only | The value of tAtmVplStatsDrpCellsRxd indicates the number of all policer cells discards (CLP=0+1) of the VPL. This excludes any buffer management discards (if applicable). |
| C32 tAtmVplStatsDrpClp0CellsRxd | 1.3.6.1.4.1.6527.3.1.2.27.6.2.1.8 | Counter32 | read-only | The value of tAtmVplStatsDrpClp0CellsRxd indicates the number of all policer CLP=0 cells discards of the VPL. This excludes any buffer management discards (if applicable). |
| C32 tAtmVplStatsDrpClp0CellsTxd | 1.3.6.1.4.1.6527.3.1.2.27.6.2.1.9 | Counter32 | read-only | The value of tAtmVplStatsDrpClp0CellsTxd indicates the number of all CLP=0 cells discards of this VPL. This includes both discards due to buffer management and policer. |
| C32 tAtmVplStatsTagCells | 1.3.6.1.4.1.6527.3.1.2.27.6.2.1.10 | Counter32 | read-only | The value of tAtmVplStatsTagCells indicates the number of tagged CLP=0 cells of the VPL. The egress may or may not discard these cells. |
| tAtmOamVplStatisticsTable | 1.3.6.1.4.1.6527.3.1.2.27.6.3 | not-accessible | The tAtmOamVplStatisticsTable is used to gather oam statistics on a particular VPL entry in the RFC 2515 AToM MIB. | |
| tAtmOamVplStatisticsEntry | 1.3.6.1.4.1.6527.3.1.2.27.6.3.1 | not-accessible | An entry in the tAtmVplStatisticsTable containing statistics information applicable to a particular VPL entry in the AToM MIB. | |
| C32 tAtmOamVplStatsAISCellsTxd | 1.3.6.1.4.1.6527.3.1.2.27.6.3.1.1 | Counter32 | read-only | The value of tAtmOamVplStatsAISCellsTxd indicates the number of AIS cells transmitted on this VPL for both end to end and segment. |
| C32 tAtmOamVplStatsRDICellsTxd | 1.3.6.1.4.1.6527.3.1.2.27.6.3.1.2 | Counter32 | read-only | The value of tAtmOamVplStatsRDICellsTxd indicates the number of RDI cells transmitted on this VPL for both end to end and segment. |
| C32 tAtmOamVplStatsLoopbackCellsTxd | 1.3.6.1.4.1.6527.3.1.2.27.6.3.1.3 | Counter32 | read-only | The value of tAtmOamVplStatsLoopbackCellsTxd indicates the number of loopback requests and responses transmitted on this VPL for both end to end and segment. |
| C32 tAtmOamVplStatsAISCellsRxd | 1.3.6.1.4.1.6527.3.1.2.27.6.3.1.4 | Counter32 | read-only | The value of tAtmOamVplStatsAISCellsRxd indicates the number of AIS cells received on this VPL for both end to end and segment. |
| C32 tAtmOamVplStatsRDICellsRxd | 1.3.6.1.4.1.6527.3.1.2.27.6.3.1.5 | Counter32 | read-only | The value of tAtmOamVplStatsRDICellsRxd indicates the number of RDI cells received on this VPL for both end to end and segment. |
| C32 tAtmOamVplStatsLoopbackCellsRxd | 1.3.6.1.4.1.6527.3.1.2.27.6.3.1.6 | Counter32 | read-only | The value of tAtmOamVplStatsLoopbackCellsRxd indicates the number of loopback requests and responses received on this VPL for both end to end and segment. |
| C32 tAtmOamVplStatsCrc10Errors | 1.3.6.1.4.1.6527.3.1.2.27.6.3.1.7 | Counter32 | read-only | The value of tAtmOamVplStatsCrc10Errors indicates the number of OAM cells discarded on this VPL with CRC 10 errors. |
| C32 tAtmOamVplStatsOtherCellsRxd | 1.3.6.1.4.1.6527.3.1.2.27.6.3.1.8 | Counter32 | read-only | This value of tAtmOamVplStatsOtherCellsRxd indicates the number of OAM cells that are received on this VPL but not identified. |
| tAtmVtlObjs | 1.3.6.1.4.1.6527.3.1.2.27.7 | |||
| tAtmVtlInfoTable | 1.3.6.1.4.1.6527.3.1.2.27.7.1 | not-accessible | The tAtmVtlInfoTable is used to display non-configuration information on a particular VTL entry. | |
| tAtmVtlInfoEntry | 1.3.6.1.4.1.6527.3.1.2.27.7.1.1 | not-accessible | An entry in the tAtmVtlInfoTable containing non-configuration information applicable to a particular VTL entry. | |
| OID tAtmVtlStartVpi | 1.3.6.1.4.1.6527.3.1.2.27.7.1.1.1 | AtmVpIdentifier | not-accessible | The starting VPI value of the VTL. |
| OID tAtmVtlEndVpi | 1.3.6.1.4.1.6527.3.1.2.27.7.1.1.2 | AtmVpIdentifier | not-accessible | The ending VPI value of the VTL. |
| ATM tAtmVtlAdminStatus | 1.3.6.1.4.1.6527.3.1.2.27.7.1.1.3 | AtmVorXAdminStatus | read-only | tAtmVtlAdminStatus specifies the desired administrative state of the VTL. |
| ATM tAtmVtlOperStatus | 1.3.6.1.4.1.6527.3.1.2.27.7.1.1.4 | AtmVorXOperStatus | read-only | tAtmVtlOperStatus indicates the current operational status of the VTL. |
| ATM tAtmVtlLastChange | 1.3.6.1.4.1.6527.3.1.2.27.7.1.1.5 | AtmVorXLastChange | read-only | tAtmVtlLastChange indicates the value of sysUpTime at the time this VTL entered its current operational state. |
| ATM tAtmVtlReceiveTrafficDescrIndex | 1.3.6.1.4.1.6527.3.1.2.27.7.1.1.6 | AtmTrafficDescrParamIndex | read-only | tAtmVtlReceiveTrafficDescrIndex identifies the row in the atmTrafficDescrParamTable which applies to the receive direction of the VTL. |
| ATM tAtmVtlTransmitTrafficDescrIndex | 1.3.6.1.4.1.6527.3.1.2.27.7.1.1.7 | AtmTrafficDescrParamIndex | read-only | tAtmVtlTransmitTrafficDescrIndex identifies the row in the atmTrafficDescrParamTable which applies to the transmit direction of the VTL. |
| ROW tAtmVtlRowStatus | 1.3.6.1.4.1.6527.3.1.2.27.7.1.1.8 | RowStatus | read-only | tAtmVtlRowStatus indicates the current RowStatus of the VTL. Entries in the tAtmVtlInfoTable are created as a result of the creation of another system entity (such as a SAP). Since entries in this table can not be created directly tAtmVtlRowStatus is read-only and will always be 'active' if the row exists. |
| ATM tAtmVtlCastType | 1.3.6.1.4.1.6527.3.1.2.27.7.1.1.9 | AtmConnCastType | read-only | tAtmVtlCastType indicates the connection topology type. |
| ATM tAtmVtlConnKind | 1.3.6.1.4.1.6527.3.1.2.27.7.1.1.10 | AtmConnKind | read-only | tAtmVtlConnKind indicates the use of call control. |
| ATM tAtmVtlInfoOwner | 1.3.6.1.4.1.6527.3.1.2.27.7.1.1.11 | AtmConnectionOwner | read-only | The value of tAtmVtlInfoOwner indicates which application caused the creation of the ATM VTL. |
| tAtmVtlStatisticsTable | 1.3.6.1.4.1.6527.3.1.2.27.7.2 | not-accessible | The tAtmVtlStatisticsTable is used to gather cell-level statistics on a particular VTL entry. | |
| tAtmVtlStatisticsEntry | 1.3.6.1.4.1.6527.3.1.2.27.7.2.1 | not-accessible | An entry in the tAtmVtlStatisticsTable containing statistics information applicable to a particular VTL entry. | |
| C64 tAtmVtlStatsTotalCellsRxd | 1.3.6.1.4.1.6527.3.1.2.27.7.2.1.1 | Counter64 | read-only | The value of tAtmVtlStatsTotalCellsRxd indicates the number of valid ATM cells received by the VTL including both CLP=0 and CLP=1 cells. If traffic policing is implemented, then cells are counted prior to the application of traffic policing. |
| C64 tAtmVtlStatsTotalClp0CellsRxd | 1.3.6.1.4.1.6527.3.1.2.27.7.2.1.2 | Counter64 | read-only | The value of tAtmVtlStatsTotalClp0CellsRxd indicates the number of valid ATM CLP=0 cells received by the VTL. If traffic policing is implemented, then cells are counted prior to the application of traffic policing. |
| C64 tAtmVtlStatsTotalCellsTxd | 1.3.6.1.4.1.6527.3.1.2.27.7.2.1.3 | Counter64 | read-only | The value of tAtmVtlStatsTotalCellsTxd indicates the number of valid ATM cells transmitted by the VTL including both CLP=0 and CLP=1 cells. If traffic policing is implemented, then cells are counted prior to the application of traffic policing. |
| C64 tAtmVtlStatsTotalClp0CellsTxd | 1.3.6.1.4.1.6527.3.1.2.27.7.2.1.4 | Counter64 | read-only | The value of tAtmVtlStatsTotalClp0CellsTxd indicates the number of valid ATM CLP=0 cells transmitted by the VTL. If traffic policing is implemented, then cells are counted prior to the application of traffic policing. |
| C64 tAtmVtlStatsTotalBytesRxd | 1.3.6.1.4.1.6527.3.1.2.27.7.2.1.5 | Counter64 | read-only | The value of tAtmVtlStatsTotalBytesRxd indicates the number of bytes received by this VTL. This is the number of tAtmVtlStatsTotalCellsRxd multiplied by 53. |
| C64 tAtmVtlStatsTotalBytesTxd | 1.3.6.1.4.1.6527.3.1.2.27.7.2.1.6 | Counter64 | read-only | The value of tAtmVtlStatsTotalBytesTxd indicates the number of bytes transmitted by this VTL. This is the number of tAtmVtlStatsTotalCellsTxd multiplied by 53. |
| C32 tAtmVtlStatsDrpCellsRxd | 1.3.6.1.4.1.6527.3.1.2.27.7.2.1.7 | Counter32 | read-only | The value of tAtmVtlStatsDrpCellsRxd indicates the number of all policer cells discards (CLP=0+1) of the VTL. This excludes any buffer management discards (if applicable). |
| C32 tAtmVtlStatsDrpClp0CellsRxd | 1.3.6.1.4.1.6527.3.1.2.27.7.2.1.8 | Counter32 | read-only | The value of tAtmVtlStatsDrpClp0CellsRxd indicates the number of all policer CLP=0 cells discards of the VTL. This excludes any buffer management discards (if applicable). |
| C32 tAtmVtlStatsDrpClp0CellsTxd | 1.3.6.1.4.1.6527.3.1.2.27.7.2.1.9 | Counter32 | read-only | The value of tAtmVtlStatsDrpClp0CellsTxd indicates the number of all CLP=0 cells discards of this VTL. This includes both discards due to buffer management and policer. |
| C32 tAtmVtlStatsTagCells | 1.3.6.1.4.1.6527.3.1.2.27.7.2.1.10 | Counter32 | read-only | The value of tAtmVtlStatsTagCells indicates the number of tagged CLP=0 cells of the VTL. The egress may or may not discard these cells. |
| tAtmCellVclObjs | 1.3.6.1.4.1.6527.3.1.2.27.8 | |||
| tAtmCellVclStatisticsTable | 1.3.6.1.4.1.6527.3.1.2.27.8.1 | not-accessible | tAtmCellVclStatisticsTable is used to gather cell-level statistics on a particular VCC entry in the RFC 2515 AToM MIB. | |
| tAtmCellVclStatisticsEntry | 1.3.6.1.4.1.6527.3.1.2.27.8.1.1 | not-accessible | An entry in the tAtmCellVclStatisticsTable containing statistics information applicable to a particular VCL entry in the AToM MIB. | |
| C64 tAtmCellVclStatsClp0CellsRxd | 1.3.6.1.4.1.6527.3.1.2.27.8.1.1.1 | Counter64 | read-only | The value of tAtmCellVclStatsClp0CellsRxd indicates the number of valid ATM CLP=0 cells received by the VCL. |
| C64 tAtmCellVclStatsClp0CellsTxd | 1.3.6.1.4.1.6527.3.1.2.27.8.1.1.2 | Counter64 | read-only | The value of tAtmCellVclStatsClp0CellsTxd indicates the number of valid ATM CLP=0 cells transmitted by the VCL. |
| C32 tAtmCellVclStatsDrpCellsRxd | 1.3.6.1.4.1.6527.3.1.2.27.8.1.1.3 | Counter32 | read-only | The value of tAtmCellVclStatsDrpCellsRxd indicates the number of all policer cells discards (CLP=0+1) of the VCL. This excludes any buffer management discards (if applicable). |
| C32 tAtmCellVclStatsDrpClp0CellsRxd | 1.3.6.1.4.1.6527.3.1.2.27.8.1.1.4 | Counter32 | read-only | The value of tAtmCellVclStatsDrpClp0CellsRxd indicates the number of all policer CLP=0 cells discards of the VCL. This excludes any buffer management discards (if applicable). |
| C32 tAtmCellVclStatsDrpClp0CellsTxd | 1.3.6.1.4.1.6527.3.1.2.27.8.1.1.5 | Counter32 | read-only | The value of tAtmCellVclStatsDrpClp0CellsTxd indicates the number of all CLP=0 cells discards of this VCL. This includes both discards due to buffer management and policer. |
| C32 tAtmCellVclStatsTagCells | 1.3.6.1.4.1.6527.3.1.2.27.8.1.1.6 | Counter32 | read-only | The value of tAtmCellVclStatsTagCells indicates the number of tagged CLP=0 cells of the VCL. The egress may or may not discard these cells. |
| tAtmSystemObjs | 1.3.6.1.4.1.6527.3.1.2.27.9 | |||
| ATM tAtmSysLlid | 1.3.6.1.4.1.6527.3.1.2.27.9.1 | AtmLlid | read-create | The ATM LLID is the Loopback location ID that uniquely identifies the system for the ATM OAM Loopback purposes. |
| INT tAtmSysOamRetryUp | 1.3.6.1.4.1.6527.3.1.2.27.9.2 | INTEGER | read-create | The value of tAtmSysOamRetryUp specifies the number of consecutive OAM loopback attempts that must succeed after the periodic attempt before the endpoint will transition from the eteAisLoc state to up. A value of 0 means that the endpoint will transition to the up state immediately if the periodic loopback attempt succeeds. |
| INT tAtmSysOamRetryDown | 1.3.6.1.4.1.6527.3.1.2.27.9.3 | INTEGER | read-create | The value of tAtmSysOamRetryDown specifies the number of consecutive OAM loopback attempts that must fail after the periodic attempt before the endpoint will transition from the up state to eteAisLoc. A value of 0 means that the endpoint will transition to the eteAisLoc state immediately if the periodic loopback attempt fails. |
| INT tAtmSysOamLoopbackPeriod | 1.3.6.1.4.1.6527.3.1.2.27.9.4 | INTEGER | read-create | The value of tAtmSysOamLoopbackPeriod specifies the number of seconds between periodic loopback attempts on an ATM endpoint that has periodic loopback enabled. |
| tAtmIlmiLinkObjs | 1.3.6.1.4.1.6527.3.1.2.27.10 | |||
| tAtmIlmiLinkTable | 1.3.6.1.4.1.6527.3.1.2.27.10.1 | not-accessible | The tAtmIlmiLinkTable is used to configure ILMI Link attributes. | |
| tAtmIlmiLinkEntry | 1.3.6.1.4.1.6527.3.1.2.27.10.1.1 | not-accessible | An entry in the tAtmIlmiLinkTable containing additional management information applicable to a particular ILMI link on an ATM interface | |
| ROW tAtmIlmiLinkRowStatus | 1.3.6.1.4.1.6527.3.1.2.27.10.1.1.1 | RowStatus | read-create | tAtmIlmiLinkRowStatus is used to create, delete or modify a row in this table. |
| TIM tAtmIlmiLinkLastChanged | 1.3.6.1.4.1.6527.3.1.2.27.10.1.1.2 | TimeStamp | read-only | The value of tAtmIlmiLinkLastChanged indicates the sysUpTime value when this row was last modified. |
| INT tAtmIlmiLinkAdminStatus | 1.3.6.1.4.1.6527.3.1.2.27.10.1.1.3 | INTEGER | read-create | The value of tAtmIlmiLinkAdminStatus specifies the administrative status for the ILMI Link. |
| INT tAtmIlmiLinkOperStatus | 1.3.6.1.4.1.6527.3.1.2.27.10.1.1.4 | INTEGER | read-only | The value of tAtmIlmiLinkOperStatus indicates the operational status of the ILMI Link. |
| OID tAtmIlmiLinkVpi | 1.3.6.1.4.1.6527.3.1.2.27.10.1.1.5 | AtmVpIdentifier | read-create | The value of tAtmIlmiLinkVpi specifies the VPI value of the ILMI link. Once this row has been created, this value cannot be modified. |
| OID tAtmIlmiLinkVci | 1.3.6.1.4.1.6527.3.1.2.27.10.1.1.6 | AtmVcIdentifier | read-create | The value of tAtmIlmiLinkVci specifies the VCI value of the ILMI link. This value cannot be zero. Once this row has been created, this value cannot be modified. |
| INT tAtmIlmiLinkFsmState | 1.3.6.1.4.1.6527.3.1.2.27.10.1.1.7 | INTEGER | read-only | The value of tAtmIlmiLinkFsmState indicates the state of the ILMI Finite State Machine associated with this interface. |
| ATM tAtmIlmiLinkReceiveTrafficDescrIndex | 1.3.6.1.4.1.6527.3.1.2.27.10.1.1.8 | AtmTrafficDescrParamIndex | read-create | The value of tAtmIlmiLinkReceiveTrafficDescrIndex specifies the value of the atmTrafficDescrParamIndex index for the row of the ATM Traffic Descriptor Table which applies to the receive direction of this ILMI link. This value cannot be zero. |
| ATM tAtmIlmiLinkTransmitTrafficDescrIndex | 1.3.6.1.4.1.6527.3.1.2.27.10.1.1.9 | AtmTrafficDescrParamIndex | read-create | The value of tAtmIlmiLinkTransmitTrafficDescrIndex specifies the value of the atmTrafficDescrParamIndex index for the row of the ATM Traffic Descriptor Table which applies to the transmit direction of this ILMI link. This value cannot be zero. |
| I32 tAtmIlmiLinkEstablishConPollIntvl | 1.3.6.1.4.1.6527.3.1.2.27.10.1.1.10 | Integer32 | read-create | The value of tAtmIlmiLinkEstablishConPollIntvl specifies the amount of time S, in seconds, between successive transmissions of ILMI messages on this interface for the purpose of detecting the establishment of ILMI connectivity. |
| I32 tAtmIlmiLinkCheckConPollIntvl | 1.3.6.1.4.1.6527.3.1.2.27.10.1.1.11 | Integer32 | read-create | The value of tAtmIlmiLinkCheckConPollIntvl specifies the amount of time T, in seconds, between successive transmissions of ILMI messages on this interface for the purpose of detecting loss of ILMI connectivity. The distinguished value zero disables ILMI connectivity procedures on this interface. |
| I32 tAtmIlmiLinkConPollInactFactor | 1.3.6.1.4.1.6527.3.1.2.27.10.1.1.12 | Integer32 | read-create | The value of tAtmIlmiLinkConPollInactFactor specifies the number K of consecutive polls on this interface for which no ILMI response message is received before ILMI connectivity is declared lost. |
| ATM tAtmIlmiLinkUniType | 1.3.6.1.4.1.6527.3.1.2.27.10.1.1.13 | AtmIlmiLinkUniType | read-only | The value of tAtmIlmiLinkUniType indicates the UNI type of either `public' or `private' to be advertised by ILMI from this end of the interface. |
| ATM tAtmIlmiLinkDeviceType | 1.3.6.1.4.1.6527.3.1.2.27.10.1.1.14 | AtmIlmiLinkDeviceType | read-only | The value of tAtmIlmiLinkDeviceType indicates the device type of either `user' or `node' to be advertised by ILMI from this end of the interface. |
| ATM tAtmIlmiLinkVersion | 1.3.6.1.4.1.6527.3.1.2.27.10.1.1.15 | AtmIlmiLinkVersion | read-create | The value of tAtmIlmiLinkVersion specifies the ILMI version of either `3.1' or `4.0' to be advertised by ILMI from this end of the interface. The configuration of version `3.0' is not allowed. |
| ATM tAtmIlmiLinkImeType | 1.3.6.1.4.1.6527.3.1.2.27.10.1.1.16 | AtmIlmiLinkImeType | read-create | The value of tAtmIlmiLinkImeType specifies the configured IME type of either `User-Side' or `Network-Side'. |
| ATM tAtmIlmiLinkNegotiatedVersion | 1.3.6.1.4.1.6527.3.1.2.27.10.1.1.17 | AtmIlmiLinkVersion | read-only | The value of tAtmIlmiLinkNegotiatedVersion specifies the ILMI version of either `3.0', `3.1' or `4.0' negotiated with peer IME. |
| ATM tAtmIlmiLinkNegotiatedImeType | 1.3.6.1.4.1.6527.3.1.2.27.10.1.1.18 | AtmIlmiLinkImeType | read-only | The value of tAtmIlmiLinkNegotiatedImeType specifies the resulting IME type of either `User-Side' or `Network-Side' based on local and remote UNI type and device type. |
| INT tAtmIlmiLinkNeighborIfIdentifier | 1.3.6.1.4.1.6527.3.1.2.27.10.1.1.19 | INTEGER | read-only | The value of tAtmIlmiLinkNeighborIfIdentifier indicates the interface identifier advertised by the peer IME. A value of 0 indicates that the value has not been received from the peer IME. |
| OCT tAtmIlmiLinkNeighborSystemIdentifier | 1.3.6.1.4.1.6527.3.1.2.27.10.1.1.20 | OCTET STRING | read-only | The value of tAtmIlmiLinkNeighborSystemIdentifier indicates The system identifier advertised by the peer IME. A value of `0' indicates that the value has not been received from the peer IME. |
| ATM tAtmIlmiLinkNeighborUniType | 1.3.6.1.4.1.6527.3.1.2.27.10.1.1.21 | AtmIlmiLinkUniType | read-only | The value of tAtmIlmiLinkNeighborUniType indicates the UNI type of either `public' or `private' that is advertised by the peer IME. A value of `undefined' indicates that the value has not been received from the peer IME. |
| ATM tAtmIlmiLinkNeighborDeviceType | 1.3.6.1.4.1.6527.3.1.2.27.10.1.1.22 | AtmIlmiLinkDeviceType | read-only | The value of tAtmIlmiLinkNeighborDeviceType indicates the device type of either `user' or `node' that is advertised by the peer IME. A value of `undefined' indicates that the value has not been received from the peer IME. |
| ATM tAtmIlmiLinkNeighborVersion | 1.3.6.1.4.1.6527.3.1.2.27.10.1.1.23 | AtmIlmiLinkVersion | read-only | The value of tAtmIlmiLinkNeighborVersion indicates the ILMI version of either `3.0', `3.1' or `4.0' that is advertised by the peer IME. A value of `undefined' indicates that the value has not been received from the peer IME. |
| INT tAtmIlmiLinkNeighborMaxVpcs | 1.3.6.1.4.1.6527.3.1.2.27.10.1.1.24 | INTEGER | read-only | The value of tAtmIlmiLinkNeighborMaxVpcs indicates the maximum number of VPCs that can be supported by the neighbor. If the interface does not negotiate with its peer to determine the number of VPCs that can be configured on the interface, then the value of this object must equal 0. |
| INT tAtmIlmiLinkNeighborMaxVccs | 1.3.6.1.4.1.6527.3.1.2.27.10.1.1.25 | INTEGER | read-only | The value of tAtmIlmiLinkNeighborMaxVccs indicates the maximum number of VCCs that can be supported by the neighbor. If the interface does not negotiate with its peer to determine the number of VCCs that can be configured on the interface, then the value of this object must equal 0. |
| INT tAtmIlmiLinkNeighborMaxVpiBits | 1.3.6.1.4.1.6527.3.1.2.27.10.1.1.26 | INTEGER | read-only | The value of tAtmIlmiLinkNeighborMaxVpiBits indicates the maximum number of VPI bits that can be supported by the neighbor. If the interface does not negotiate with its peer to determine the number of VPI bits that can be configured on the interface, then the value of this object must equal 0. |
| INT tAtmIlmiLinkNeighborMaxVciBits | 1.3.6.1.4.1.6527.3.1.2.27.10.1.1.27 | INTEGER | read-only | The value of tAtmIlmiLinkNeighborMaxVciBits indicates the maximum number of VCI bits that can be supported by the neighbor. If the interface does not negotiate with its peer to determine the number of VCI bits that can be configured on the interface, then the value of this object must equal 0. |
| tAtmIlmiLinkStatisticsTable | 1.3.6.1.4.1.6527.3.1.2.27.10.2 | not-accessible | The tAtmIlmiLinkStatisticsTable is used to gather statistics on a particular ILMI Link. | |
| tAtmIlmiLinkStatisticsEntry | 1.3.6.1.4.1.6527.3.1.2.27.10.2.1 | not-accessible | An entry in the tAtmIlmiLinkStatisticsTable containing statistics information applicable to a particular ILMI link on an ATM interface. | |
| C32 tAtmIlmiLinkOutPdus | 1.3.6.1.4.1.6527.3.1.2.27.10.2.1.1 | Counter32 | read-only | The value of tAtmIlmiLinkOutPdus indicates the total number SNMP PDUs sent on this ILMI link. |
| C32 tAtmIlmiLinkOutGetRequestPdus | 1.3.6.1.4.1.6527.3.1.2.27.10.2.1.2 | Counter32 | read-only | The value of tAtmIlmiLinkOutGetRequestPdus indicates the total number GetRequest SNMP PDUs sent on this ILMI link. |
| C32 tAtmIlmiLinkOutGetNextRequestPdus | 1.3.6.1.4.1.6527.3.1.2.27.10.2.1.3 | Counter32 | read-only | The value of tAtmIlmiLinkOutGetNextRequestPdus indicates the total number GetNextRequest SNMP PDUs sent on this ILMI link. |
| C32 tAtmIlmiLinkOutSetRequestPdus | 1.3.6.1.4.1.6527.3.1.2.27.10.2.1.4 | Counter32 | read-only | The value of tAtmIlmiLinkOutSetRequestPdus indicates the total number 'SetRequest' SNMP PDUs sent on this ILMI link. |
| C32 tAtmIlmiLinkOutGetResponsePdus | 1.3.6.1.4.1.6527.3.1.2.27.10.2.1.5 | Counter32 | read-only | The value of tAtmIlmiLinkOutGetResponsePdus indicates the total number GetResponse SNMP PDUs sent on this ILMI link in response to GetRequest, GetNextRequest and 'SetRequests' received. |
| C32 tAtmIlmiLinkOutTrapPdus | 1.3.6.1.4.1.6527.3.1.2.27.10.2.1.6 | Counter32 | read-only | The value of tAtmIlmiLinkOutTrapPdus indicates the total number Trap SNMP PDUs sent on this ILMI link. |
| C32 tAtmIlmiLinkOutTooBigErrors | 1.3.6.1.4.1.6527.3.1.2.27.10.2.1.7 | Counter32 | read-only | The value of tAtmIlmiLinkOutTooBigErrors indicates the total number SNMP `TooBig' error messages sent on this ILMI link. |
| C32 tAtmIlmiLinkOutNoSuchNameErrors | 1.3.6.1.4.1.6527.3.1.2.27.10.2.1.8 | Counter32 | read-only | The value of tAtmIlmiLinkOutNoSuchNameErrors indicates the total number SNMP `NoSuchName' error messages sent on this ILMI link. |
| C32 tAtmIlmiLinkOutBadValueErrors | 1.3.6.1.4.1.6527.3.1.2.27.10.2.1.9 | Counter32 | read-only | The value of tAtmIlmiLinkOutBadValueErrors indicates the total number SNMP `BadValue' error messages sent on this ILMI link. |
| C32 tAtmIlmiLinkOutReadOnlyErrors | 1.3.6.1.4.1.6527.3.1.2.27.10.2.1.10 | Counter32 | read-only | The value of tAtmIlmiLinkOutReadOnlyErrors indicates the total number SNMP `ReadOnly' error messages sent on this ILMI link. |
| C32 tAtmIlmiLinkOutGeneralErrors | 1.3.6.1.4.1.6527.3.1.2.27.10.2.1.11 | Counter32 | read-only | The value of tAtmIlmiLinkOutGeneralErrors indicates the total number SNMP `General' error messages sent on this ILMI link. |
| C32 tAtmIlmiLinkInPdus | 1.3.6.1.4.1.6527.3.1.2.27.10.2.1.12 | Counter32 | read-only | The value of tAtmIlmiLinkInPdus indicates the total number SNMP PDUs received on this ILMI link. |
| C32 tAtmIlmiLinkInGetRequestPdus | 1.3.6.1.4.1.6527.3.1.2.27.10.2.1.13 | Counter32 | read-only | The value of tAtmIlmiLinkInGetRequestPdus indicates the total number GetRequest SNMP PDUs received on this ILMI link. |
| C32 tAtmIlmiLinkInGetNextRequestPdus | 1.3.6.1.4.1.6527.3.1.2.27.10.2.1.14 | Counter32 | read-only | The value of tAtmIlmiLinkInGetNextRequestPdus indicates the total number 'GetNextRequest' SNMP PDUs received on this ILMI link. |
| C32 tAtmIlmiLinkInSetRequestPdus | 1.3.6.1.4.1.6527.3.1.2.27.10.2.1.15 | Counter32 | read-only | The value of tAtmIlmiLinkInSetRequestPdus indicates the total number 'SetRequest' SNMP PDUs received on this ILMI link. |
| C32 tAtmIlmiLinkInGetResponsePdus | 1.3.6.1.4.1.6527.3.1.2.27.10.2.1.16 | Counter32 | read-only | The value of tAtmIlmiLinkInGetResponsePdus indicates the total number 'GetResponse' SNMP PDUs received on this ILMI link in response to 'GetRequest', 'GetNextRequest' and 'SetRequests' sent. |
| C32 tAtmIlmiLinkInTrapPdus | 1.3.6.1.4.1.6527.3.1.2.27.10.2.1.17 | Counter32 | read-only | The value of tAtmIlmiLinkInTrapPdus indicates the total number Trap SNMP PDUs received on this ILMI link. |
| C32 tAtmIlmiLinkInTooBigErrors | 1.3.6.1.4.1.6527.3.1.2.27.10.2.1.18 | Counter32 | read-only | The value of tAtmIlmiLinkInTooBigErrors indicates the total number SNMP `TooBig' error messages received on this ILMI link. |
| C32 tAtmIlmiLinkInNoSuchNameErrors | 1.3.6.1.4.1.6527.3.1.2.27.10.2.1.19 | Counter32 | read-only | The value of tAtmIlmiLinkInNoSuchNameErrors indicates the total number SNMP `NoSuchName' error messages received on this ILMI link. |
| C32 tAtmIlmiLinkInBadValueErrors | 1.3.6.1.4.1.6527.3.1.2.27.10.2.1.20 | Counter32 | read-only | The value of tAtmIlmiLinkInBadValueErrors indicates the total number SNMP `BadValue' error messages received on this ILMI link. |
| C32 tAtmIlmiLinkInReadOnlyErrors | 1.3.6.1.4.1.6527.3.1.2.27.10.2.1.21 | Counter32 | read-only | The value of tAtmIlmiLinkInReadOnlyErrors indicates the total number SNMP `ReadOnly' error messages received on this ILMI link. |
| C32 tAtmIlmiLinkInGeneralErrors | 1.3.6.1.4.1.6527.3.1.2.27.10.2.1.22 | Counter32 | read-only | The value of tAtmIlmiLinkInGeneralErrors indicates the total number SNMP `General' error messages received on this ILMI link. |
| C32 tAtmIlmiLinkInInvalidSnmpVersionPdus | 1.3.6.1.4.1.6527.3.1.2.27.10.2.1.23 | Counter32 | read-only | The value of tAtmIlmiLinkInInvalidSnmpVersionPdus indicates the total number SNMP PDUs received with invalid version on this ILMI link. |
| C32 tAtmIlmiLinkInInvalidSnmpCommunityStringPdus | 1.3.6.1.4.1.6527.3.1.2.27.10.2.1.24 | Counter32 | read-only | The value of tAtmIlmiLinkInInvalidSnmpCommunityStringPdus indicates the total number SNMP PDUs received with invalid community string on this ILMI link. |
| C32 tAtmIlmiLinkInInvalidSnmpFormatPdus | 1.3.6.1.4.1.6527.3.1.2.27.10.2.1.25 | Counter32 | read-only | The value of tAtmIlmiLinkInInvalidSnmpFormatPdus indicates the total number SNMP PDUs received with invalid ASN.1 format on this ILMI link. |
| tAtmTCSublayerObjs | 1.3.6.1.4.1.6527.3.1.2.27.11 | |||
| tAtmTCSublayerTable | 1.3.6.1.4.1.6527.3.1.2.27.11.1 | not-accessible | The tAtmTCSublayerTable contains the Transmission Convergence Sublayer data. | |
| tAtmTCSublayerEntry | 1.3.6.1.4.1.6527.3.1.2.27.11.1.1 | not-accessible | An entry in the tAtmTCSublayerEntry containing additional management information about the Transmission Covergence Sublayer. | |
| C32 tAtmTCSublayerHecErrors | 1.3.6.1.4.1.6527.3.1.2.27.11.1.1.1 | Counter32 | read-only | The value of tAtmTCSublayerHecErrors indicates the number of cells with uncorrectable HEC Errors on this interface. |
| C32 tAtmTCSublayerHecErrorsFixed | 1.3.6.1.4.1.6527.3.1.2.27.11.1.1.2 | Counter32 | read-only | The value of tAtmTCSublayerHecErrorsFixed indicates the number of cells with correctable HEC Errors on this interface. |
| tAtmCpObjs | 1.3.6.1.4.1.6527.3.1.2.27.12 | |||
| tAtmCpStatisticsTable | 1.3.6.1.4.1.6527.3.1.2.27.12.1 | not-accessible | The tAtmCpStatisticsTable is used to gather statistics on connection profiles assigned to interfaces. | |
| tAtmCpStatisticsEntry | 1.3.6.1.4.1.6527.3.1.2.27.12.1.1 | not-accessible | An entry in the tAtmCpStatisticsTable contains statistics information applicable to a particular connection profile assigned to a particular interface. | |
| C64 tAtmCpStatsTotalCellsRxd | 1.3.6.1.4.1.6527.3.1.2.27.12.1.1.1 | Counter64 | read-only | The value of tAtmCpStatsTotalCellsRxd indicates the number of valid ATM cells received by the connection profile. If traffic policing is implemented, then cells are counted prior to the application of traffic policing. To obtain the byte count multiply tAtmCpStatsTotalCellsRxd by 53. |
| C32 tAtmCpStatsTotalCellsRxdLo | 1.3.6.1.4.1.6527.3.1.2.27.12.1.1.2 | Counter32 | read-only | The value of tAtmCpStatsTotalCellsRxdLo indicates the lower 32-bits of tAtmCpStatsTotalCellsRxd. |
| C32 tAtmCpStatsTotalCellsRxdHi | 1.3.6.1.4.1.6527.3.1.2.27.12.1.1.3 | Counter32 | read-only | The value of tAtmCpStatsTotalCellsRxdHi indicates the upper 32-bits of tAtmCpStatsTotalCellsRxd. |
| C64 tAtmCpStatsTotalCellsTxd | 1.3.6.1.4.1.6527.3.1.2.27.12.1.1.4 | Counter64 | read-only | The value of tAtmCpStatsTotalCellsTxd indicates the number of valid ATM cells transmitted by the connection profile. If traffic policing is implemented, then cells are counted prior to the application of traffic policing. To obtain the byte count multiply tAtmCpStatsTotalCellsTxd by 53. |
| C32 tAtmCpStatsTotalCellsTxdLo | 1.3.6.1.4.1.6527.3.1.2.27.12.1.1.5 | Counter32 | read-only | The value of tAtmCpStatsTotalCellsTxdLo indicates the lower 32-bits of tAtmCpStatsTotalCellsTxd. |
| C32 tAtmCpStatsTotalCellsTxdHi | 1.3.6.1.4.1.6527.3.1.2.27.12.1.1.6 | Counter32 | read-only | The value of tAtmCpStatsTotalCellsTxdHi indicates the upper 32-bits of tAtmCpStatsTotalCellsTxd. |
| C64 tAtmCpStatsClp0CellsRxd | 1.3.6.1.4.1.6527.3.1.2.27.12.1.1.7 | Counter64 | read-only | The value of tAtmCpStatsClp0CellsRxd indicates the number of valid ATM CLP=0 cells received by the connection profile. |
| C32 tAtmCpStatsClp0CellsRxdLo | 1.3.6.1.4.1.6527.3.1.2.27.12.1.1.8 | Counter32 | read-only | The value of tAtmCpStatsClp0CellsRxdLo indicates the lower 32-bits of tAtmCpStatsClp0CellsRxd. |
| C32 tAtmCpStatsClp0CellsRxdHi | 1.3.6.1.4.1.6527.3.1.2.27.12.1.1.9 | Counter32 | read-only | The value of tAtmCpStatsClp0CellsRxdHi indicates the upper 32-bits of tAtmCpStatsClp0CellsRxd. |
| C64 tAtmCpStatsClp0CellsTxd | 1.3.6.1.4.1.6527.3.1.2.27.12.1.1.10 | Counter64 | read-only | The value of tAtmCpStatsClp0CellsTxd indicates the number of valid ATM CLP=0 cells transmitted by the connection profile. |
| C32 tAtmCpStatsClp0CellsTxdLo | 1.3.6.1.4.1.6527.3.1.2.27.12.1.1.11 | Counter32 | read-only | The value of tAtmCpStatsClp0CellsTxdLo indicates the lower 32-bits of tAtmCpStatsClp0CellsTxd. |
| C32 tAtmCpStatsClp0CellsTxdHi | 1.3.6.1.4.1.6527.3.1.2.27.12.1.1.12 | Counter32 | read-only | The value of tAtmCpStatsClp0CellsTxdHi indicates the upper 32-bits of tAtmCpStatsClp0CellsTxd. |
| C32 tAtmCpStatsDrpCellsRxd | 1.3.6.1.4.1.6527.3.1.2.27.12.1.1.13 | Counter32 | read-only | The value of tAtmCpStatsDrpCellsRxd indicates the number of all policer cells discards (CLP=0+1) of the connection profile. This excludes any buffer management discards (if applicable). |
| C32 tAtmCpStatsDrpClp0CellsRxd | 1.3.6.1.4.1.6527.3.1.2.27.12.1.1.14 | Counter32 | read-only | The value of tAtmCpStatsDrpClp0CellsRxd indicates the number of all policer CLP=0 cells discards of the connection profile. This excludes any buffer management discards (if applicable). |
| C32 tAtmCpStatsDrpClp0CellsTxd | 1.3.6.1.4.1.6527.3.1.2.27.12.1.1.15 | Counter32 | read-only | The value of tAtmCpStatsDrpClp0CellsTxd indicates the number of all CLP=0 cells discards of this connection profile. This includes both discards due to buffer management and policer. |
| C32 tAtmCpStatsTagCells | 1.3.6.1.4.1.6527.3.1.2.27.12.1.1.16 | Counter32 | read-only | The value of tAtmCpStatsTagCells indicates the number of tagged CLP=0 cells of the connection profile. The egress may or may not discard these cells. |
| tmnxAtmNotifyPrefix | 1.3.6.1.4.1.6527.3.1.3.27 | |||
| tAtmNotifications | 1.3.6.1.4.1.6527.3.1.3.27.0 | |||
| NTF tAtmTcSubLayerDown | 1.3.6.1.4.1.6527.3.1.3.27.0.1 | The tAtmTcSubLayerDown notification is generated when the ATM interface indicates that the TC Sublayer is currently in the Loss of Cell Delineation (LCD) defect maintenance state. | ||
| NTF tAtmTcSubLayerClear | 1.3.6.1.4.1.6527.3.1.3.27.0.2 | The tAtmTcSubLayerClear notification is generated when the ATM interface indicates that the TC Sublayer is currently not in the Loss of Cell Delineation (LCD) defect maintenance state. | ||
| NTF tAtmPlcpSubLayerDown | 1.3.6.1.4.1.6527.3.1.3.27.0.3 | The tAtmPlcpSubLayerDown notification is generated when the ATM interface indicates that PLCP is currently in the far end alarm or incoming LOF defect maintenance state. | ||
| NTF tAtmPlcpSubLayerClear | 1.3.6.1.4.1.6527.3.1.3.27.0.4 | The tAtmPlcpSubLayerClear notification is generated when the ATM interface indicates that PLCP is currently not in the far end alarm or incoming LOF defect maintenance state. | ||
| NTF tAtmEpOutOfPeerVpiOrVciRange | 1.3.6.1.4.1.6527.3.1.3.27.0.5 | The tAtmEpOutOfPeerVpiOrVciRange notification is sent whenever an ILMI link becomes operationally up and ATM EPs are configured on the ILMI-managed interface that are outside the VPI or VCI range allowed by the peer. | ||
| NTF tAtmMaxPeerVccsExceeded | 1.3.6.1.4.1.6527.3.1.3.27.0.6 | The tAtmMaxPeerVccsExceeded notification is sent whenever an ILMI link becomes operationally up and there are more ATM VCLs configured on the ILMI-managed interface than are supported by the peer. | ||
| NTF tAtmMaxPeerVpcsExceeded | 1.3.6.1.4.1.6527.3.1.3.27.0.7 | The tAtmMaxPeerVpcsExceeded notification is sent whenever an ILMI link becomes operationally up and there are more ATM VPLs configured on the ILMI-managed interface than are supported by the peer. | ||
| NTF tAtmIlmiLinkStatusChange | 1.3.6.1.4.1.6527.3.1.3.27.0.8 | The tAtmIlmiLinkStatusChange notification is sent whenever a status change occurs on an ILMI link. This includes changes to the ILMI link's administrative status and the ILMI link's operational status. |
RFC description
Manages ATM functionality on Alcatel-Lucent SROS devices including RFC 2515 AToM extensions and ILMI link attributes.
Start monitoring Nokia/Alcatel-Lucent 7750 SR routers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.