All MIBs › TIMETRA-CALLTRACE-MIB
Organization: Nokia
Last Updated: 2016-01-01
Category: Nokia SR OS / Alcatel-Lucent 7750 SR, Subscriber and Mobile Management
Description: Manages Nokia/Alcatel-Lucent 7750 SR call trace diagnostic session configuration and output.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is TIMETRA-CALLTRACE-MIB?
TIMETRA-CALLTRACE-MIB is Nokia's SROS MIB for configuring and managing Call Trace diagnostic sessions on 7750 SR routers, used to capture detailed per-subscriber or per-call signaling/traffic traces for troubleshooting. It exposes profile tables defining trace configuration (name, description, row status) along with objects tracking storage usage, such as the maximum number of trace files, files currently used, and files still available, plus the primary compact-flash storage location. Its monitoring value is around diagnostic-feature and storage software status: an operator can confirm a trace profile is correctly configured and check whether trace file storage capacity is close to exhaustion, which would prevent new traces from being captured. It is a Nokia SROS proprietary MIB without a stated dependency on external standard MIBs. It is typically deployed by carrier operations/support teams actively troubleshooting a subscriber session or call issue on a 7750 SR platform. Engineers can download the TIMETRA-CALLTRACE-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in TIMETRA-CALLTRACE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Nokia 7750 SR (SROS) router
Monitoring Examples
An administrator would check tmnxCallTraceUsedFilesNumber against tmnxCallTraceMaxFilesNumber and tmnxCallTraceAvailFilesNumber to see how much call-trace storage capacity remains before starting a new capture, and confirm tmnxCallTraceProfileTable entries (via tmnxCallTraceProfileName and tmnxCallTraceProfileRowStatus) are active and correctly described. A tmnxCallTraceAvailFilesNumber approaching zero would warn the operator that older trace files on tmnxCallTracePrimaryCFlash need to be cleared before a new diagnostic trace can be captured.
What Can Be Monitored
- call trace profile configuration and status
- number of trace files used vs available
- maximum trace file capacity
- trace storage location (compact flash)
This MIB depends on
Related MIBs
Imported Objects
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressType | |
| InetPortNumber |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Gauge32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| MacAddress | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TimeStamp | |
| TruthValue |
From TIMETRA-CHASSIS-MIB
| TmnxSlotNum |
From TIMETRA-GLOBAL-MIB
| timetraSRMIBModules | OBJECT-IDENTITY |
| tmnxSRConfs | OBJECT-IDENTITY |
| tmnxSRNotifyPrefix | OBJECT-IDENTITY |
| tmnxSRObjs | OBJECT-IDENTITY |
From TIMETRA-TC-MIB
| TItemDescription | |
| TNamedItem | |
| TNamedItemOrEmpty | |
| TmnxEncapVal | |
| TmnxPortID | |
| TmnxVRtrID |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| timetraCallTraceMIBModule | 1.3.6.1.4.1.6527.1.1.3.102 | This document is the SNMP MIB module for the Nokia SROS implementation of Call Trace. Copyright 2003-2016 Nokia. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied `as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. | ||
| tmnxCallTraceConformance | 1.3.6.1.4.1.6527.3.1.1.102 | |||
| tmnxCallTraceCompliances | 1.3.6.1.4.1.6527.3.1.1.102.1 | |||
| tmnxCallTraceCompliance | 1.3.6.1.4.1.6527.3.1.1.102.1.1 | The compliance statement for the management of call trace feature on Nokia SROS series systems. | ||
| tmnxCallTraceGroups | 1.3.6.1.4.1.6527.3.1.1.102.2 | |||
| tmnxCallTraceInitialGroups | 1.3.6.1.4.1.6527.3.1.1.102.2.1 | |||
| tmnxCallTraceProfileGroup | 1.3.6.1.4.1.6527.3.1.1.102.2.1.1 | The group of objects supporting the management of call trace profiles on Nokia SROS systems. | ||
| tmnxCallTraceLocStoreGroup | 1.3.6.1.4.1.6527.3.1.1.102.2.1.2 | The group of objects supporting the management of call trace local storage on Nokia SROS systems. | ||
| tmnxCallTraceScalarCfgGroup | 1.3.6.1.4.1.6527.3.1.1.102.2.1.3 | The group of objects supporting the management of call trace scalar configuration on Nokia SROS systems. | ||
| tmnxCallTraceJobGroup | 1.3.6.1.4.1.6527.3.1.1.102.2.1.4 | The group of objects supporting the presenatation of call trace job related data on Nokia SROS systems. | ||
| tmnxCallTraceNotifyGroup | 1.3.6.1.4.1.6527.3.1.1.102.2.1.5 | The group of notifications supporting call trace feature on Nokia SROS systems. | ||
| tmnxCallTraceFileGroup | 1.3.6.1.4.1.6527.3.1.1.102.2.1.6 | The group of objects supporting the presenatation of call trace files related data for Nokia SROS systems. | ||
| tmnxCallTraceScalarStatsGroup | 1.3.6.1.4.1.6527.3.1.1.102.2.1.7 | The group of objects supporting the management of call trace scalar configuration on Nokia SROS systems. | ||
| tmnxCallTraceObjs | 1.3.6.1.4.1.6527.3.1.2.102 | |||
| tmnxCallTraceScalarObjs | 1.3.6.1.4.1.6527.3.1.2.102.1 | |||
| tmnxCallTraceLastChangedObjs | 1.3.6.1.4.1.6527.3.1.2.102.1.1 | |||
| TIM tmnxCallTraceProfileTblLstChgd | 1.3.6.1.4.1.6527.3.1.2.102.1.1.1 | TimeStamp | read-only | The value of the object tmnxCallTraceProfileTblLstChgd indicates the sysUpTime at the time of the last modification to tmnxCallTraceProfileTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| TIM tmnxCallTraceLocationTblLstChgd | 1.3.6.1.4.1.6527.3.1.2.102.1.1.2 | TimeStamp | read-only | The value of the object tmnxCallTraceLocationTblLstChgd indicates the sysUpTime at the time of the last modification to tmnxCallTraceLocationTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| tmnxCallTraceScalarConfigObjs | 1.3.6.1.4.1.6527.3.1.2.102.1.2 | |||
| U32 tmnxCallTraceMaxFilesNumber | 1.3.6.1.4.1.6527.3.1.2.102.1.2.1 | Unsigned32 | read-write | The value of the object tmnxCallTraceMaxFilesNumber specifies the maximum number of all call trace log files stored on all compact flash cards together. The value comprises both active and finished jobs. |
| TMN tmnxCallTracePrimaryCFlash | 1.3.6.1.4.1.6527.3.1.2.102.1.2.2 | TmnxCallTraceCFlashId | read-write | The value of the object tmnxCallTracePrimaryCFlash specifies the compact flash card to be used as the primary local storage location to save the generated call trace log files. The system will write to the specified compact flash card until the size of all generated files reaches the limit defined by the value of the object tmnxCallTraceLocationSizeLimit for the given compact flash card and the card is not disabled as the local storage location by the value of the object tmnxCallTraceLocationDisable. Once the limit is reached or the card is disabled the files will be written to the other compact flash card. The compact flash card must be available in the system in order to select it as the primary storage location. If the card is not available at the moment of SNMP SET operation, the other card is automatically selected as the primary location. |
| tmnxCallTraceScalarStatsObjs | 1.3.6.1.4.1.6527.3.1.2.102.1.3 | |||
| U32 tmnxCallTraceUsedFilesNumber | 1.3.6.1.4.1.6527.3.1.2.102.1.3.1 | Unsigned32 | read-only | The value of the object tmnxCallTraceUsedFilesNumber indicates the number of all call trace log files stored on all compact flash cards together. The value comprises both active and finished jobs. |
| U32 tmnxCallTraceAvailFilesNumber | 1.3.6.1.4.1.6527.3.1.2.102.1.3.2 | Unsigned32 | read-only | The value of the object tmnxCallTraceAvailFilesNumber indicates the remaining number of call trace log files available for use on all compact flash cards together. The value comprises both active and finished jobs. |
| tmnxCallTraceConfigObjs | 1.3.6.1.4.1.6527.3.1.2.102.2 | |||
| tmnxCallTraceProfileTable | 1.3.6.1.4.1.6527.3.1.2.102.2.1 | not-accessible | The table tmnxCallTraceProfileTable contains information pertaining to call trace profiles configured on the system. A call trace profile is a collection of parameters used for creation of call trace jobs. A maximum of 10 profiles can be configured in the system. | |
| tmnxCallTraceProfileEntry | 1.3.6.1.4.1.6527.3.1.2.102.2.1.1 | not-accessible | Each row entry represents a call trace profile defined in the system. Rows in the table tmnxCallTraceProfileTable are created and destroyed by SNMP SET operations on the object tmnxCallTraceProfileRowStatus. The call trace profile 'default' is created by the agent itself at the initialization of the system and cannot be modified or deleted by SNMP SET operations. | |
| TNA tmnxCallTraceProfileName | 1.3.6.1.4.1.6527.3.1.2.102.2.1.1.1 | TNamedItem | not-accessible | The value of the object tmnxCallTraceProfileName specifies the unique name of the call trace profile. The value 'default' is reserved for the default profile that is automatically created by the agent at the initialization of the system. |
| TIM tmnxCallTraceProfileLstChgd | 1.3.6.1.4.1.6527.3.1.2.102.2.1.1.2 | TimeStamp | read-only | The value of the object tmnxCallTraceProfileLstChgd indicates the sysUpTime at the time of creation or the last modification to this row in tmnxCallTraceProfileTable. |
| ROW tmnxCallTraceProfileRowStatus | 1.3.6.1.4.1.6527.3.1.2.102.2.1.1.3 | RowStatus | read-create | The value of the object tmnxCallTraceProfileRowStatus specifies the status of the conceptual row in tmnxCallTraceProfileTable. Rows are created and destroyed by SNMP SET operations on this object. The row corresponding to the default profile (the value of the object tmnxCallTraceProfileName equal to 'default') cannot be modified or deleted by SNMP SET operations on this object. Only values 'active(1)', 'createAndGo(4)' and 'destroy(6)' are supported. |
| TIT tmnxCallTraceProfileDescription | 1.3.6.1.4.1.6527.3.1.2.102.2.1.1.4 | TItemDescription | read-create | The value of the object tmnxCallTraceProfileDescription specifies the description string for this call trace profile. |
| TMN tmnxCallTraceProfileSizeLimit | 1.3.6.1.4.1.6527.3.1.2.102.2.1.1.5 | TmnxCallTraceSizeLimit | read-create | The value of the object tmnxCallTraceProfileSizeLimit specifies the maximum data volume generated by a single call trace job to the output in megabytes. After reaching the limit the call trace job for a given host is automatically terminated. |
| TMN tmnxCallTraceProfileTimeLimit | 1.3.6.1.4.1.6527.3.1.2.102.2.1.1.6 | TmnxCallTraceTimeLimit | read-create | The value of the object tmnxCallTraceProfileTimeLimit specifies the maximum duration of a single call trace job in seconds. After reaching the limit the call trace job for a given host is automatically terminated. |
| IPt tmnxCallTraceProfileDstAddrType | 1.3.6.1.4.1.6527.3.1.2.102.2.1.1.7 | InetAddressType | read-create | The value of the object tmnxCallTraceProfileDstAddrType specifies the context (IP address type or Fully Qualified Domain Name (FQDN)) in which the value of the object tmnxCallTraceProfileDstAddr is to be interpreted. Only values 'unknown (0)', 'ipv4 (1)', 'ipv6 (2)' and 'dns (16)' are supported. |
| IP tmnxCallTraceProfileDstAddr | 1.3.6.1.4.1.6527.3.1.2.102.2.1.1.8 | InetAddress | read-create | The value of the object tmnxCallTraceProfileDstAddr specifies the live output destination address of the trace log generated by a call trace job. The value of the object can be set to a non-default value only if the value of the object tmnxCallTraceProfileDstAddrType is set to a non-default value. If the value is equal to default then a local compact flash card is used as a destination. Parameters of the local storage can be set in tmnxCallTraceLocationTable. If the value is not equal to default then the live output is being sent to the destination identified by the IP address / FQDN value of this object and the values of the objects tmnxCallTraceProfileDstPort and tmnxCallTraceProfileVRtrId. If the value of the object tmnxCallTraceProfileDstAddrType is 'unknown (0)' then the size of this object can be only 0. If the value of the object tmnxCallTraceProfileDstAddrType is 'ipv4(1)' then the size of this object can be only 4 and the value cannot consist of all 0s. If the value of the object tmnxCallTraceProfileDstAddrType is 'ipv6(2)' then the size of this object can be only 16 and the value cannot consist of all 0s. If the value of the object tmnxCallTraceProfileDstAddrType is 'dns(16)' then the size of this object can be 1..255. The value of this object is automatically set to default when the value of the object tmnxCallTraceProfileDstAddrType is set to 'unknown (0)'. |
| INE tmnxCallTraceProfileDstPort | 1.3.6.1.4.1.6527.3.1.2.102.2.1.1.9 | InetPortNumber | read-create | The value of the object tmnxCallTraceProfileDstPort specifies the destination port for the call trace live output destination defined by the value of the object tmnxCallTraceProfileDstAddr. The value of this object is ignored if the value of the object tmnxCallTraceProfileDstAddr is equal to its default. The value of this object can be set to a non-default value only if the value of the object tmnxCallTraceProfileDstAddrType is set to a non-default value. |
| TMN tmnxCallTraceProfileVRtrId | 1.3.6.1.4.1.6527.3.1.2.102.2.1.1.10 | TmnxVRtrID | read-create | The value of the object tmnxCallTraceProfileVRtrId specifies the virtual router instance ID in scope of which the live output destination identified by the values of the objects tmnxCallTraceProfileDstAddr and tmnxCallTraceProfileDstPort is to be reached. The default value of '1' identifies the 'Base' router instance. The value of this object can be set to a non-default value only if the value of the object tmnxCallTraceProfileDstAddrType is set to a non-default value. |
| T/F tmnxCallTraceProfileDbgOutput | 1.3.6.1.4.1.6527.3.1.2.102.2.1.1.12 | TruthValue | read-create | The value of the object tmnxCallTraceProfileDbgOutput specifies whether the trace log generated by a call trace job will be decoded as text and send to debug logging. Enabling this object disables logging to compact flash and is mutually exclusive with the live-output. |
| tmnxCallTraceLocationTable | 1.3.6.1.4.1.6527.3.1.2.102.2.2 | not-accessible | The table tmnxCallTraceLocationTable contains information pertaining to the configuration of the local storage of call trace log files on the compact flash cards. In release 14.0 only cf1 and cf2 can be used as the local storage of call trace log files. | |
| tmnxCallTraceLocationEntry | 1.3.6.1.4.1.6527.3.1.2.102.2.2.1 | not-accessible | Each row entry represents one compact flash card to be used for local storage of call trace log files. Rows in the table tmnxCallTraceLocationTable are created by the SYSTEM at its startup and are never destroyed. | |
| U32 tmnxCallTraceLocationCFlashId | 1.3.6.1.4.1.6527.3.1.2.102.2.2.1.1 | Unsigned32 | not-accessible | The value of the object tmnxCallTraceLocationCFlashId specifies the ID of the compact flash card. In release 14.0 only cf1 and cf2 can be used as the local storage of call trace log files. |
| TIM tmnxCallTraceLocationLstChgd | 1.3.6.1.4.1.6527.3.1.2.102.2.2.1.2 | TimeStamp | read-only | The value of the object tmnxCallTraceLocationLstChgd indicates the sysUpTime at the time of creation or the last modification to this row in tmnxCallTraceLocationTable. |
| U32 tmnxCallTraceLocationSizeLimit | 1.3.6.1.4.1.6527.3.1.2.102.2.2.1.3 | Unsigned32 | read-write | The value of the object tmnxCallTraceLocationSizeLimit specifies the maximum cumulative size of all local call trace log files stored on the given compact flash card. The value '0' means there is no size limit defined. |
| T/F tmnxCallTraceLocationDisable | 1.3.6.1.4.1.6527.3.1.2.102.2.2.1.4 | TruthValue | read-write | The value of the object tmnxCallTraceLocationDisable specifies whether the given compact flash card shall be used as the local storage for the generated log files or not. The value 'true(1)' means the local storage on the given compact flash card is disabled and no files will be created on it. The value 'false(2)' means the local storage on the given compact flash card is enabled and files and can be created on it. |
| tmnxCallTraceLocationStatsTable | 1.3.6.1.4.1.6527.3.1.2.102.2.3 | not-accessible | The table tmnxCallTraceLocationStatsTable contains information pertaining to the state of the local storage of call trace log files on the compact flash cards. In release 14.0 only cf1 and cf2 can be used as the local storage of call trace log files. | |
| tmnxCallTraceLocationStatsEntry | 1.3.6.1.4.1.6527.3.1.2.102.2.3.1 | not-accessible | Each row entry represents one compact flash card to be used for local storage of call trace log files. Rows in the table tmnxCallTraceLocationTable are created by the SYSTEM at its startup and are never destroyed. | |
| U32 tmnxCallTraceLocationUsedSpace | 1.3.6.1.4.1.6527.3.1.2.102.2.3.1.1 | Unsigned32 | read-only | The value of the object tmnxCallTraceLocationUsedSpace indicates the amount of used storage space in megabytes on the CF card. |
| U32 tmnxCallTraceLocationAvailSpace | 1.3.6.1.4.1.6527.3.1.2.102.2.3.1.2 | Unsigned32 | read-only | The value of the object tmnxCallTraceLocationAvailSpace indicates the amount of available storage space in megabytes on the CF card. |
| tmnxCallTraceStatsObjs | 1.3.6.1.4.1.6527.3.1.2.102.3 | |||
| tmnxCallTraceJobTable | 1.3.6.1.4.1.6527.3.1.2.102.3.1 | not-accessible | The table tmnxCallTraceJobTable contains read-only information pertaining to all call trace jobs present in the system. | |
| tmnxCallTraceJobEntry | 1.3.6.1.4.1.6527.3.1.2.102.3.1.1 | not-accessible | Each row entry represents a call trace job existing in the system. Rows in the table tmnxCallTraceProfileTable are automatically created by the system at creation of a call trace job and destroyed at removal of the job from the system. | |
| U32 tmnxCallTraceJobId | 1.3.6.1.4.1.6527.3.1.2.102.3.1.1.1 | Unsigned32 | not-accessible | The value of the object tmnxCallTraceJobId indicates the ID of the call trace job. |
| TMN tmnxCallTraceJobType | 1.3.6.1.4.1.6527.3.1.2.102.3.1.1.2 | TmnxCallTraceHostType | read-only | The value of the object tmnxCallTraceJobType indicates the type of the call trace job. If the value is 'ue(1)' then the IEEE address of the UE being monitored is indicated by tmnxCallTraceJobWlanGwUeIeeeAddr. |
| MAC tmnxCallTraceJobWlanGwUeIeeeAddr | 1.3.6.1.4.1.6527.3.1.2.102.3.1.1.3 | MacAddress | read-only | The value of the object tmnxCallTraceJobWlanGwUeIeeeAddr indicates the IEEE address of the UE being monitored by this call trace job. The value is only valid when the value of the object tmnxCallTraceJobType is 'ue(1)'. |
| TMN tmnxCallTraceJobStatus | 1.3.6.1.4.1.6527.3.1.2.102.3.1.1.4 | TmnxCallTraceJobStatus | read-only | The value of the object tmnxCallTraceJobStatus indicates the status of the call trace job. The value 'running (0)' indicates the job is active and is tracing events triggered by the host. If the value of the tmnxCallTraceJobType is 'ue(1)' then the host to trace is specified by the value of the tmnxCallTraceJobWlanGwUeIeeeAddr object. The value 'finished (1)' indicates the job has already finished and is not tracing events generated by the host anymore. The job was terminated either due to reaching one of the defined limits (tmnxCallTraceJobSizeLimit or tmnxCallTraceJobTimeLimit) or manual intervention of an operator. |
| TNA tmnxCallTraceJobProfileName | 1.3.6.1.4.1.6527.3.1.2.102.3.1.1.5 | TNamedItem | read-only | The value of the object tmnxCallTraceJobProfileName indicates the name of the call trace profile used to define job's parameters at the moment of creation of the job. Note: Current values of the trace profile's parameters in tmnxCallTraceProfileTable may differ from their values at the moment of creation of the job. |
| TMN tmnxCallTraceJobSizeLimit | 1.3.6.1.4.1.6527.3.1.2.102.3.1.1.6 | TmnxCallTraceSizeLimit | read-only | The value of the object tmnxCallTraceJobSizeLimit indicates the maximum data volume generated by this call trace job to an output in megabytes. If the value of the object tmnxCallTraceJobStatus is 'running (0)' then the job will be automatically terminated after reaching this limit. |
| TMN tmnxCallTraceJobTimeLimit | 1.3.6.1.4.1.6527.3.1.2.102.3.1.1.7 | TmnxCallTraceTimeLimit | read-only | The value of the object tmnxCallTraceJobTimeLimit indicates the maximum duration of this call trace job in seconds. If the value of the object tmnxCallTraceJobStatus is 'running (0)' then the job will be automatically terminated after reaching this limit. |
| INT tmnxCallTraceJobCaptureFormat | 1.3.6.1.4.1.6527.3.1.2.102.3.1.1.8 | INTEGER | read-only | The value of the object tmnxCallTraceJobCaptureFormat indicates the format in which the logs generated by this call trace job are stored on cflash cards and sent to the live output defined by the values of the objects tmnxCallTraceJobDstAddrType, tmnxCallTraceJobDstAddr, tmnxCallTraceJobDstPort and tmnxCallTraceJobVRtrId. |
| IPt tmnxCallTraceJobDstAddrType | 1.3.6.1.4.1.6527.3.1.2.102.3.1.1.9 | InetAddressType | read-only | The value of the object tmnxCallTraceJobDstAddrType indicates the context (IP address type or Fully Qualified Domain Name (FQDN)) in which the value of the object tmnxCallTraceJobDstAddr is to be interpreted. Only values 'unknown (0)', 'ipv4 (1)', 'ipv6 (2)' and 'dns (16)' are supported. |
| IP tmnxCallTraceJobDstAddr | 1.3.6.1.4.1.6527.3.1.2.102.3.1.1.10 | InetAddress | read-only | The value of the object tmnxCallTraceJobDstAddr indicates the live output destination address of the trace log generated by this call trace job. This object can contain a non-empty value only if the value of the object tmnxCallTraceJobDstAddrType is other than 'unknown (0)'. In that case the live output is being sent to the destination identified by the IP address / FQDN value of this object and the values of the objects tmnxCallTraceJobDstPort and tmnxCallTraceJobVRtrId. If the value of this object holds FQDN then the resolved IP address is indicated by the value of tmnxCallTraceJobDstResAddr. If the value of this object is empty then a local compact flash card is used as the destination. If the value of the object tmnxCallTraceJobDstAddrType is 'unknown (0)' then the size of this object can be only 0. If the value of the object tmnxCallTraceJobDstAddrType is 'ipv4(1)' then the size of this object can be only 4. If the value of the object tmnxCallTraceJobDstAddrType is 'ipv6(2)' then the size of this object can be only 16. If the value of the object tmnxCallTraceJobDstAddrType is 'dns(16)' then the size of this object can be 1..255. |
| IPt tmnxCallTraceJobDstResAddrType | 1.3.6.1.4.1.6527.3.1.2.102.3.1.1.11 | InetAddressType | read-only | The value of the object tmnxCallTraceJobDstResAddrType indicates the context, in which the value of the object tmnxCallTraceJobDstResAddr is to be interpreted. Only values 'unknown (0)', 'ipv4 (1)' and 'ipv6 (2)' are supported. This object can hold value other than 'unknown (0)' only if the value of the object tmnxCallTraceJobDstAddrType is 'dns (16)'. |
| IP tmnxCallTraceJobDstResAddr | 1.3.6.1.4.1.6527.3.1.2.102.3.1.1.12 | InetAddress | read-only | The value of the object tmnxCallTraceJobDstResAddr indicates the IP address, that the FQDN indicated by the value of tmnxCallTraceJobDstAddr was resolved into. This object can contain a non-empty value only if the value of the object tmnxCallTraceJobDstResAddrType is other than 'unknown (0)'. |
| INE tmnxCallTraceJobDstPort | 1.3.6.1.4.1.6527.3.1.2.102.3.1.1.13 | InetPortNumber | read-only | The value of the object tmnxCallTraceJobDstPort indicates the destination UDP port on the destination indicated by the value of the object tmnxCallTraceJobDstAddr which the live output generated by this call trace job is being sent to. The value of this object shall be ignored if the value of the object tmnxCallTraceJobDstAddr is equal to 'unknown (0)'. |
| TMN tmnxCallTraceJobVRtrId | 1.3.6.1.4.1.6527.3.1.2.102.3.1.1.14 | TmnxVRtrID | read-only | The value of the object tmnxCallTraceJobVRtrId indicates the virtual router instance ID in scope of which the live output destination identified by the values of the objects tmnxCallTraceJobDstAddr and tmnxCallTraceJobDstPort is to be reached. The value '1' identifies the 'Base' router instance. The value of this object shall be ignored if the value of the object tmnxCallTraceJobDstAddr is equal to 'unknown (0)'. |
| DAT tmnxCallTraceJobStartTime | 1.3.6.1.4.1.6527.3.1.2.102.3.1.1.15 | DateAndTime | read-only | The value of the object tmnxCallTraceJobStartTime indicates the time when this call trace job has been started. |
| U32 tmnxCallTraceJobCaptMsgsCnt | 1.3.6.1.4.1.6527.3.1.2.102.3.1.1.16 | Unsigned32 | read-only | The value of the object tmnxCallTraceJobCaptMsgsCnt indicates the number of events this call trace job has generated so far. |
| U32 tmnxCallTraceJobCaptMsgsSize | 1.3.6.1.4.1.6527.3.1.2.102.3.1.1.17 | Unsigned32 | read-only | The value of the object tmnxCallTraceJobCaptMsgsSize indicates the total size of all messages this call trace job has generated so far. |
| tmnxCallTraceFileTable | 1.3.6.1.4.1.6527.3.1.2.102.3.2 | not-accessible | The table tmnxCallTraceFileTable contains read-only information pertaining to all call trace log files locally stored on cflash cards in the system. To limit the impact on the file system the contents of the table is refreshed on SNMP GET/NEXT request only if the previous update has been done more than 5 seconds ago (for active jobs) or 10 seconds ago (for finished jobs). | |
| tmnxCallTraceFileEntry | 1.3.6.1.4.1.6527.3.1.2.102.3.2.1 | not-accessible | Each row entry represents a single call trace file present on a cflash card. Rows in the table tmnxCallTraceFileTable are automatically created by the system at creation of a call trace log file and destroyed at removal of the file from the cflash card. | |
| TMN tmnxCallTraceFileJobStatus | 1.3.6.1.4.1.6527.3.1.2.102.3.2.1.1 | TmnxCallTraceJobStatus | not-accessible | The value of the object tmnxCallTraceFileJobStatus indicates the status of the call trace job that has created this log file. The details about the call trace job can be found in tmnxCallTraceJobTable. The value 'running (0)' indicates the job is active and is tracing events triggered by the host and events are being recorded to the file. The value 'finished (1)' indicates the job has already finished and is not tracing events generated by the host anymore. |
| TMN tmnxCallTraceFileCpmSlotNum | 1.3.6.1.4.1.6527.3.1.2.102.3.2.1.2 | TmnxSlotNum | not-accessible | The value of the object tmnxCallTraceFileCpmSlotNum indicates the CPM slot where the cflash card containing the log file is present. |
| TMN tmnxCallTraceFileCFlashId | 1.3.6.1.4.1.6527.3.1.2.102.3.2.1.3 | TmnxCallTraceCFlashId | not-accessible | The value of the object tmnxCallTraceFileCFlashId indicates the ID of the cflash card on the CPM board identified by the value of the object tmnxCallTraceFileCpmSlotNum where the log file is present. |
| STR tmnxCallTraceFileName | 1.3.6.1.4.1.6527.3.1.2.102.3.2.1.4 | DisplayString | not-accessible | The value of the object tmnxCallTraceFileName indicates the basename of the log file. The basename is composed of following items: 'mac__[_].pcap' where is a MAC address of the host in form '00-11-22-33-44-55' is a date and time of creation of the file in form 'YYMMDD_HHMM' (24 hr format) is a value used for internal purposes |
| STR tmnxCallTraceFileDir | 1.3.6.1.4.1.6527.3.1.2.102.3.2.1.5 | DisplayString | read-only | The value of the object tmnxCallTraceFileDir indicates the absolute pathname of the directory where the log file identified by the value of the object tmnxCallTraceFileName is stored on the cflash card identified by the values of the objects tmnxCallTraceFileCpmSlotNum and tmnxCallTraceFileCFlashId. In release 14.0 the only possible locations are: '/calltrace/running' '/calltrace/finished' |
| U32 tmnxCallTraceFileSize | 1.3.6.1.4.1.6527.3.1.2.102.3.2.1.6 | Unsigned32 | read-only | The value of the object tmnxCallTraceFileSize indicates the size of the log file in bytes. |
| DAT tmnxCallTraceFileLastDataModif | 1.3.6.1.4.1.6527.3.1.2.102.3.2.1.7 | DateAndTime | read-only | The value of the object tmnxCallTraceFileLastDataModif indicates the time of the last modification to this file. |
| tmnxCallTraceNotificationObjs | 1.3.6.1.4.1.6527.3.1.2.102.20 | |||
| tmnxCallTraceNotifyPrefix | 1.3.6.1.4.1.6527.3.1.3.102 | |||
| tmnxCallTraceNotifications | 1.3.6.1.4.1.6527.3.1.3.102.0 | |||
| NTF tmnxCallTraceMaxFilesNumReached | 1.3.6.1.4.1.6527.3.1.3.102.0.1 | [CAUSE] This notification is triggered for the following reasons: 1) Cumulative number of call trace log files present on all cflash cards on the active CPM that are being used for local storage has reached the limit defined by the value of the object tmnxCallTraceMaxFilesNumber. 2) The value of the object tmnxCallTraceMaxFilesNumber has been changed to a value that is lower than the current cumulative number of all call trace log files present on all cflash cards on the active CPM that are being used for local storage. Details about cflash cards that are being used for the local storage of call trace log files can be found in tmnxCallTraceLocationTable. [EFFECT] New call trace log file(s) cannot be created on any cflash card. [RECOVERY] Operator may execute one of the following actions to restore the functionality: 1) Remove some call trace log files from (a) cflash card(s). 2) Increase the value of the object tmnxCallTraceMaxFilesNumber. | ||
| NTF tmnxCallTraceLocSizeLimitReached | 1.3.6.1.4.1.6527.3.1.3.102.0.2 | [CAUSE] This notification is triggered when the cumulative size of all call trace log files on a given cflash card on the active CPM has reached the limit specified by the value of the object tmnxCallTraceLocationSizeLimit. [EFFECT] New call trace log file(s) cannot be created on the impacted cflash card. [RECOVERY] Operator may execute one of the following actions to restore the functionality: 1) Remove some call trace log files from the cflash card. 2) Increase the size limit (value of the object tmnxCallTraceLocationSizeLimit) for the given cflash card. |
RFC description
Implements call trace functionality for Nokia SROS systems to capture and analyze signaling and call information.
Start monitoring Nokia 7750 SR (SROS) router (Call Trace profile config/storage-capacity status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.