All MIBs › TIMETRA-MLD-SNOOPING-MIB
Organization: Alcatel-Lucent
Last Updated: 2008-01-01
Description: TIMETRA-MLD-SNOOPING-MIB module
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is TIMETRA-MLD-SNOOPING-MIB?
TIMETRA-MLD-SNOOPING-MIB is part of Nokia/Alcatel-Lucent's TIMETRA enterprise MIB family, managing the MLD (Multicast Listener Discovery, IPv6 multicast) snooping feature per service on SROS routers. It exposes tlsMldSnpgConfigTable with per-service admin state, general-query interval, robustness count, and query/report source addressing, plus MVR (multicast VPN routing) admin state. It is used to monitor software/configuration status of IPv6 multicast delivery: tlsMldSnpgCfgAdminState reveals whether snooping is actually enabled on a given service, and a misconfigured tlsMldSnpgCfgGenQueryIntvl or robustness count can explain subscribers failing to join or promptly leave multicast groups. It complements the IETF MLD protocol (RFC 2710) and Alcatel-Lucent's TLS (Transparent LAN Service)/VPLS bridging MIBs on which it operates. It is deployed on Nokia SROS routers delivering metro Ethernet IPTV or other IPv6 multicast services. Engineers can download the TIMETRA-MLD-SNOOPING-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in TIMETRA-MLD-SNOOPING-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Nokia/Alcatel-Lucent SROS routers delivering IPTV/multicast VPLS services
Monitoring Examples
An admin would poll tlsMldSnpgConfigTable per service and check tlsMldSnpgCfgAdminState is enabled where multicast video is expected; a service showing admin state down would explain subscriber complaints of missing channels. tlsMldSnpgCfgGenQueryIntvl and tlsMldSnpgCfgRobustCount would be reviewed to confirm query timing matches expected join/leave latency. tlsMldSnpgCfgQuerySrcAddr and tlsMldSnpgCfgMvrAdminState would be checked to verify the query source and MVR settings are consistent across the service.
What Can Be Monitored
- MLD snooping admin state per service
- general query interval
- robustness count
- query/report source address
- MVR admin state
This MIB depends on
Related MIBs
Imported Objects
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressType |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TimeStamp | |
| TruthValue |
From TIMETRA-GLOBAL-MIB
| timetraSRMIBModules | OBJECT-IDENTITY |
| tmnxSRConfs | OBJECT-IDENTITY |
| tmnxSRNotifyPrefix | OBJECT-IDENTITY |
| tmnxSRObjs | OBJECT-IDENTITY |
From TIMETRA-SAP-MIB
| sapEncapValue | OBJECT-TYPE |
| sapPortId | OBJECT-TYPE |
From TIMETRA-SDP-MIB
| sdpBindId | OBJECT-TYPE |
From TIMETRA-SERV-MIB
| SdpId | |
| svcId | OBJECT-TYPE |
From TIMETRA-TC-MIB
| TItemDescription | |
| TPolicyStatementNameOrEmpty | |
| TmnxAdminState | |
| TmnxEncapVal | |
| TmnxMldGroupFilterMode | |
| TmnxMldGroupType | |
| TmnxMldVersion | |
| TmnxPortID | |
| TmnxServId | |
| TmnxVcIdOrNone |
How to Use in IPNetwork Monitor
Example using sapMldSnpgTxGenQueries OID:
Select a Nokia/Alcatel-Lucent SROS routers delivering IPTV/multicast VPLS service (MLD snooping per-service admin status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type sapMldSnpgTxGenQueries into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The value of the object sapMldSnpgTxGenQueries indicates the number of MLD General Queries transmitted on this SAP. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| timetraMldSnoopingMIBModule | 1.3.6.1.4.1.6527.1.1.3.45 | This document is the SNMP MIB module to manage and provision the Multicast Listener Discovery (MLD) snooping feature protocol for the Alcatel-Lucent SROS device. Copyright 2008-2011 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions. Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. | ||
| tmnxMldSnoopingConformance | 1.3.6.1.4.1.6527.3.1.1.45 | |||
| tmnxMldSnoopingCompliances | 1.3.6.1.4.1.6527.3.1.1.45.1 | |||
| tmnxMldSnoopingCompliance | 1.3.6.1.4.1.6527.3.1.1.45.1.1 | The compliance statement for management of MLD Snooping on Alcatel 7xxx SR series systems. | ||
| tmnxMldSnoopingV8v0Compliance | 1.3.6.1.4.1.6527.3.1.1.45.1.2 | The compliance statement for management of MLD Snooping on Alcatel 7xxx SR series systems. | ||
| tmnxMldSnoopingGroups | 1.3.6.1.4.1.6527.3.1.1.45.2 | |||
| tmnxMldSnpgConfigGroup | 1.3.6.1.4.1.6527.3.1.1.45.2.1 | The group of objects supporting management of MLD snooping on Alcatel 7xxx SR series systems. | ||
| tmnxMldSnpgQuerierGroup | 1.3.6.1.4.1.6527.3.1.1.45.2.2 | The group of objects that allow to monitor the MLD querier in the Tls service by the MLD snooping device on Alcatel 7xxx SR series systems. | ||
| tmnxMldSnpgProxyGroup | 1.3.6.1.4.1.6527.3.1.1.45.2.3 | The group of objects that allow to monitor the MLD snooping information used to proxy report to the MRouter on Alcatel 7xxx SR series systems. | ||
| tmnxMldSnpgMRouterGroup | 1.3.6.1.4.1.6527.3.1.1.45.2.4 | The group of objects that allow to monitor the MLD multicast routers in the Tls service by the MLD snooping device on Alcatel 7xxx SR series systems. | ||
| tmnxMldMvrGroup | 1.3.6.1.4.1.6527.3.1.1.45.2.5 | The group of objects supporting MVR on Alcatel 7xxx SR series systems. | ||
| tmnxMldSnpgGroup | 1.3.6.1.4.1.6527.3.1.1.45.2.6 | The group of objects that allow to monitor the MLD snooping information on Alcatel 7xxx SR series systems. | ||
| tmnxMldSnpgStaticGroup | 1.3.6.1.4.1.6527.3.1.1.45.2.7 | The group of objects that allow to statically configure (S,G) memberships on a SAP on Alcatel 7xxx SR series systems. | ||
| tmnxMldSnpgStatsGroup | 1.3.6.1.4.1.6527.3.1.1.45.2.8 | The group of objects that allow to view statistics for MLD snooping on Alcatel 7xxx SR series systems. | ||
| tmnxMldSnpgNotifyObjsGroup | 1.3.6.1.4.1.6527.3.1.1.45.2.9 | The group of notification objects supporting MLD snooping on Alcatel 7xxx SR series systems. | ||
| tmnxMldSnpgNotifyGroup | 1.3.6.1.4.1.6527.3.1.1.45.2.10 | The group of notifications supporting MLD snooping on Alcatel 7xxx SR series systems. | ||
| tmnxMldSnpgConfigV8v0Group | 1.3.6.1.4.1.6527.3.1.1.45.2.11 | The group of objects supporting management of MLD snooping on release 8.0 Alcatel 7xxx SR series systems. | ||
| tmnxMldSnoopingObjs | 1.3.6.1.4.1.6527.3.1.2.45 | |||
| tmnxMldSnoopingTlsObjs | 1.3.6.1.4.1.6527.3.1.2.45.1 | |||
| TIM tlsMldSnpgConfigTableLastChange | 1.3.6.1.4.1.6527.3.1.2.45.1.1 | TimeStamp | read-only | The value of the object tlsMldSnpgConfigTableLastChange indicates the value of sysUpTime at the time of the last modification of an entry in the tlsMldSnpgConfigTable. |
| tlsMldSnpgConfigTable | 1.3.6.1.4.1.6527.3.1.2.45.1.2 | not-accessible | The table tlsMldSnpgConfigTable contains objects to configure the MLD snooping feature within a Tls service. | |
| tlsMldSnpgConfigEntry | 1.3.6.1.4.1.6527.3.1.2.45.1.2.1 | not-accessible | Each row represents an instance of MLD snooping running within a Tls service. Entries in this table cannot be created or deleted via SNMP operations. An entry in this table will be created by the agent upon creation of a new Tls service (svcTlsInfoTable). The entry is destroyed when the Tls service is removed. | |
| TIM tlsMldSnpgCfgLastChangeTime | 1.3.6.1.4.1.6527.3.1.2.45.1.2.1.1 | TimeStamp | read-only | The value of the object tlsMldSnpgCfgLastChangeTime indicates the sysUpTime at the time of the last modification of this entry. |
| TMN tlsMldSnpgCfgAdminState | 1.3.6.1.4.1.6527.3.1.2.45.1.2.1.2 | TmnxAdminState | read-write | The value of the object tlsMldSnpgCfgAdminState specifies the administrative state of the MLD snooping feature associated with this Tls. |
| U32 tlsMldSnpgCfgGenQueryIntvl | 1.3.6.1.4.1.6527.3.1.2.45.1.2.1.3 | Unsigned32 | read-write | The value of the object tlsMldSnpgCfgGenQueryIntvl specifies the Queriers Query Interval when the Query Interval is not sent in the Query PDU or when it is set to zero in the Query PDU. For these networks, this object needs to be set to the same value as what is configured on the Querier. |
| U32 tlsMldSnpgCfgRobustCount | 1.3.6.1.4.1.6527.3.1.2.45.1.2.1.4 | Unsigned32 | read-write | The value of the object tlsMldSnpgCfgRobustCount specifies the Querier's Robustness Variable when the Robustness Variable is not sent in the Query PDU or when it is set to zero in the Query PDU. For these networks, this object needs to be set to the same value as what is configured on the Querier. |
| IPt tlsMldSnpgCfgReportSrcAddrType | 1.3.6.1.4.1.6527.3.1.2.45.1.2.1.5 | InetAddressType | read-write | The value of the object tlsMldSnpgCfgReportSrcAddrType specifies the type of tlsMldSnpgCfgReportSrcAddr. This can only be set to 'ipv6(2)' or 'unknown(0)'. |
| IP tlsMldSnpgCfgReportSrcAddr | 1.3.6.1.4.1.6527.3.1.2.45.1.2.1.6 | InetAddress | read-write | The value of the object tlsMldSnpgCfgReportSrcAddr specifies the link local source IP address used when generating MLD reports. |
| IPt tlsMldSnpgCfgQuerySrcAddrType | 1.3.6.1.4.1.6527.3.1.2.45.1.2.1.7 | InetAddressType | read-write | The value of the object tlsMldSnpgCfgQuerySrcAddrType specifies the type of tlsMldSnpgCfgQuerySrcAddr. This can only be set to 'ipv6(2)' or 'unknown(0)'. |
| IP tlsMldSnpgCfgQuerySrcAddr | 1.3.6.1.4.1.6527.3.1.2.45.1.2.1.8 | InetAddress | read-write | The value of the object tlsMldSnpgCfgQuerySrcAddr specifies the link local source IP address used when generating MLD queries. |
| TMN tlsMldSnpgCfgMvrAdminState | 1.3.6.1.4.1.6527.3.1.2.45.1.2.1.9 | TmnxAdminState | read-write | The value of the object tlsMldSnpgCfgMvrAdminState specifies the administrative state of the MLD snooping Multicast VPLS Registration feature associated with this Tls. |
| TIT tlsMldSnpgCfgMvrDescription | 1.3.6.1.4.1.6527.3.1.2.45.1.2.1.10 | TItemDescription | read-write | The value of the object tlsMldSnpgCfgMvrDescription specifies a user provided description for the MLD snooping Multicast VPLS Registration configuration associated with this Tls. |
| TPO tlsMldSnpgCfgMvrPolicy | 1.3.6.1.4.1.6527.3.1.2.45.1.2.1.11 | TPolicyStatementNameOrEmpty | read-write | The value of the object tlsMldSnpgCfgMvrPolicy specifies the policy statement that is applied to decide whether or not a multicast group learned on a SAP with the object sapMldSnpgCfgMvrFromVplsId set to this Tls, can be joined to this Tls. If an empty string is provided, all groups learned on these SAPs are joined without applying a policy. |
| tlsMldSnpgQuerierTable | 1.3.6.1.4.1.6527.3.1.2.45.1.3 | not-accessible | The table tlsMldSnpgQuerierTable contains information related to the active MLD Querier found in each Tls Service. | |
| tlsMldSnpgQuerierEntry | 1.3.6.1.4.1.6527.3.1.2.45.1.3.1 | not-accessible | Each row represents information on the active MLD Querier within a Tls service. Entries in this table cannot be created or deleted via SNMP operations. An entry in this table will be created by the agent upon detection of an MLD Querier in a Tls service for which MLD snooping is enabled (via tlsMldSnpgCfgAdminState). | |
| TMN tlsMldSnpgQuerierVersion | 1.3.6.1.4.1.6527.3.1.2.45.1.3.1.1 | TmnxMldVersion | read-only | The value of the object tlsMldSnpgQuerierVersion indicates the version of the MLD protocol that is sent by the active MLD Querier detected in this Tls. |
| IPt tlsMldSnpgQuerierAddressType | 1.3.6.1.4.1.6527.3.1.2.45.1.3.1.2 | InetAddressType | read-only | The value of the object tlsMldSnpgQuerierAddressType indicates the type of tlsMldSnpgQuerierAddress. |
| IP tlsMldSnpgQuerierAddress | 1.3.6.1.4.1.6527.3.1.2.45.1.3.1.3 | InetAddress | read-only | The value of the object tlsMldSnpgQuerierAddress indicates the source IP address used by MLD queries sent out by the active Querier. |
| TMN tlsMldSnpgQuerierLocale | 1.3.6.1.4.1.6527.3.1.2.45.1.3.1.4 | TmnxMldSnpgLocation | read-only | The value of the object tlsMldSnpgQuerierLocale indicates where the Querier was detected. An MLD Querier found on a local SAP has the value 'sap(1)'. An MLD Querier detected on an SDP has the value 'sdp(2)'. |
| TMN tlsMldSnpgQuerierPortId | 1.3.6.1.4.1.6527.3.1.2.45.1.3.1.5 | TmnxPortID | read-only | The value of the object tlsMldSnpgQuerierPortId indicates, together with tlsMldSnpgQuerierEncapValue, the SAP on which the active Querier is detected. The value of this object is only meaningful when the value of tlsMldSnpgQuerierLocale is 'sap(1)'. |
| TMN tlsMldSnpgQuerierEncapValue | 1.3.6.1.4.1.6527.3.1.2.45.1.3.1.6 | TmnxEncapVal | read-only | The value of the object tlsMldSnpgQuerierEncapValue indicates, together with the object tlsMldSnpgQuerierPortId, the SAP on which the active Querier is detected. The value of this object is only meaningful when the value of tlsMldSnpgQuerierLocale is 'sap(1)'. |
| SDP tlsMldSnpgQuerierSdpId | 1.3.6.1.4.1.6527.3.1.2.45.1.3.1.7 | SdpId | read-only | The value of the object tlsMldSnpgQuerierSdpId indicates, together with the object tlsMldSnpgQuerierVcId, the SDP Binding on which the active Querier is detected. The value of this object is only meaningful when the value of tlsMldSnpgQuerierLocale is 'sdp(2)'. |
| TMN tlsMldSnpgQuerierVcId | 1.3.6.1.4.1.6527.3.1.2.45.1.3.1.8 | TmnxVcIdOrNone | read-only | The value of the object tlsMldSnpgQuerierVcId indicates, together with the object tlsMldSnpgQuerierSdpId, the SDP Binding on which the active Querier is detected. The value of this object is only meaningful when the value of tlsMldSnpgQuerierLocale is 'sdp(2)'. |
| TIK tlsMldSnpgQuerierUpTime | 1.3.6.1.4.1.6527.3.1.2.45.1.3.1.9 | TimeTicks | read-only | The value of the object tlsMldSnpgQuerierUpTime indicates how long (in hundredths of a second) that this Querier has been known as the current active MLD Querier. |
| U32 tlsMldSnpgQuerierExpiryTime | 1.3.6.1.4.1.6527.3.1.2.45.1.3.1.10 | Unsigned32 | read-only | The value of the object tlsMldSnpgQuerierExpiryTime indicates the time in seconds after which this Querier is no longer known as the current active MLD Querier. |
| U32 tlsMldSnpgQuerierGenQueryIntvl | 1.3.6.1.4.1.6527.3.1.2.45.1.3.1.11 | Unsigned32 | read-only | The value of the object tlsMldSnpgQuerierGenQueryIntvl indicates the General Query Interval used by the active Querier. |
| U32 tlsMldSnpgQuerierGenRespIntvl | 1.3.6.1.4.1.6527.3.1.2.45.1.3.1.12 | Unsigned32 | read-only | The value of the object tlsMldSnpgQuerierGenRespIntvl indicates the General Query Response interval (in 1/10 seconds) used by the active Querier. |
| U32 tlsMldSnpgQuerierRobustCount | 1.3.6.1.4.1.6527.3.1.2.45.1.3.1.13 | Unsigned32 | read-only | The value of the object tlsMldSnpgQuerierRobustCount indicates the Robust Count value used by the active Querier. |
| tlsMldSnpgProxyGroupTable | 1.3.6.1.4.1.6527.3.1.2.45.1.4 | not-accessible | The table tlsMldSnpgProxyGroupTable contains, together with the table tlsMldSnpgProxyGrpSrcTable, multicast group address information collected by MLD snooping for this Tls. The content of this table is used by the system to 'proxy-report' towards the MLD Querier. | |
| tlsMldSnpgProxyGroupEntry | 1.3.6.1.4.1.6527.3.1.2.45.1.4.1 | not-accessible | Each entry in this table contains information about a multicast group address known in this Tls. If a group source list is present, it is described in the corresponding entries of the tlsMldSnpgProxyGrpSrcTable table. | |
| IPt tlsMldSnpgProxyGroupAddressType | 1.3.6.1.4.1.6527.3.1.2.45.1.4.1.1 | InetAddressType | not-accessible | The value of the object tlsMldSnpgProxyGroupAddressType indicates the type of tlsMldSnpgProxyGroupAddress. |
| IP tlsMldSnpgProxyGroupAddress | 1.3.6.1.4.1.6527.3.1.2.45.1.4.1.2 | InetAddress | not-accessible | The value of the object tlsMldSnpgProxyGroupAddress indicates the IP multicast group address for which this entry contains information. |
| TMN tlsMldSnpgProxyGroupFilterMode | 1.3.6.1.4.1.6527.3.1.2.45.1.4.1.3 | TmnxMldGroupFilterMode | read-only | The value of the object tlsMldSnpgProxyGroupFilterMode indicates the filter-mode for this group. |
| TIK tlsMldSnpgProxyGroupUpTime | 1.3.6.1.4.1.6527.3.1.2.45.1.4.1.4 | TimeTicks | read-only | The value of the object tlsMldSnpgProxyGroupUpTime indicates how long (in hundredths of a second) that the group address already exists in the database. |
| tlsMldSnpgProxyGrpSrcTable | 1.3.6.1.4.1.6527.3.1.2.45.1.5 | not-accessible | The table tlsMldSnpgProxyGrpSrcTable lists the IPv6 multicast sources corresponding to the IPv6 multicast groups listed in the tlsMldSnpgProxyGroupTable. | |
| tlsMldSnpgProxyGrpSrcEntry | 1.3.6.1.4.1.6527.3.1.2.45.1.5.1 | not-accessible | tlsMldSnpgProxyGrpSrcEntry describes an entry in the tlsMldSnpgProxyGrpSrcTable. Each entry represents an IPv6 multicast source for which the system is interested/not interested in receiving multicast traffic from. | |
| IPt tlsMldSnpgProxyGrpSrcAddrTp | 1.3.6.1.4.1.6527.3.1.2.45.1.5.1.1 | InetAddressType | not-accessible | The value of the object tlsMldSnpgProxyGrpSrcAddrTp indicates the type of tlsMldSnpgProxyGrpSrcAddr. |
| IP tlsMldSnpgProxyGrpSrcAddr | 1.3.6.1.4.1.6527.3.1.2.45.1.5.1.2 | InetAddress | not-accessible | The value of the object tlsMldSnpgProxyGrpSrcAddr indicates the IPv6 multicast source address. |
| TIK tlsMldSnpgProxyGrpSrcUpTime | 1.3.6.1.4.1.6527.3.1.2.45.1.5.1.3 | TimeTicks | read-only | The value of the object tlsMldSnpgProxyGrpSrcUpTime indicates how long (in hundredths of a second) that the source address already exists in the database. |
| tlsMldSnpgMRouterTable | 1.3.6.1.4.1.6527.3.1.2.45.1.6 | not-accessible | The table tlsMldSnpgMRouterTable contains information related to the multicast routers found in each Tls Service. | |
| tlsMldSnpgMRouterEntry | 1.3.6.1.4.1.6527.3.1.2.45.1.6.1 | not-accessible | Each row contains information about one specific multicast router known within a Tls service. Entries in this table cannot be created or deleted via SNMP operations. An entry in this table will be created by the agent upon detection of a multicast router in a Tls service for which MLD snooping is enabled (via tlsMldSnpgCfgAdminState). | |
| IPt tlsMldSnpgMRouterAddressType | 1.3.6.1.4.1.6527.3.1.2.45.1.6.1.1 | InetAddressType | not-accessible | The value of the object tlsMldSnpgMRouterAddressType indicates the type of tlsMldSnpgMRouterAddress. |
| IP tlsMldSnpgMRouterAddress | 1.3.6.1.4.1.6527.3.1.2.45.1.6.1.2 | InetAddress | not-accessible | The value of the object tlsMldSnpgMRouterAddress indicates the source IP address used by MLD queries sent out by this multicast router. |
| TMN tlsMldSnpgMRouterLocale | 1.3.6.1.4.1.6527.3.1.2.45.1.6.1.3 | TmnxMldSnpgLocation | read-only | The value of the object tlsMldSnpgMRouterLocale indicates where this multicast router was detected. A multicast router found on a local SAP has the value 'sap(1)'. A multicast router detected on an SDP has the value 'sdp(2)'. |
| TMN tlsMldSnpgMRouterPortId | 1.3.6.1.4.1.6527.3.1.2.45.1.6.1.4 | TmnxPortID | read-only | The value of the object tlsMldSnpgMRouterPortId indicates, together with the object tlsMldSnpgMRouterEncapValue, the SAP on which this multicast router is detected. The value of this object is only meaningful when the value of tlsMldSnpgMRouterLocale is 'sap(1)'. |
| TMN tlsMldSnpgMRouterEncapValue | 1.3.6.1.4.1.6527.3.1.2.45.1.6.1.5 | TmnxEncapVal | read-only | The value of the object tlsMldSnpgMRouterEncapValue indicates, together with the object tlsMldSnpgMRouterPortId, the SAP on which this multicast router is detected. The value of this object is only meaningful when the value of tlsMldSnpgMRouterLocale is 'sap(1)'. |
| SDP tlsMldSnpgMRouterSdpId | 1.3.6.1.4.1.6527.3.1.2.45.1.6.1.6 | SdpId | read-only | The value of the object tlsMldSnpgMRouterSdpId indicates, together with the object tlsMldSnpgMRouterVcId, the SDP Bind on which this multicast router is detected. The value of this object is only meaningful when the value of tlsMldSnpgMRouterLocale is 'sdp(2)'. |
| TMN tlsMldSnpgMRouterVcId | 1.3.6.1.4.1.6527.3.1.2.45.1.6.1.7 | TmnxVcIdOrNone | read-only | The value of the object tlsMldSnpgMRouterVcId indicates, together with the object tlsMldSnpgMRouterSdpId, the SDP Bind on which this multicast router is detected. The value of this object is only meaningful when the value of tlsMldSnpgMRouterLocale is 'sdp(2)'. |
| TMN tlsMldSnpgMRouterVersion | 1.3.6.1.4.1.6527.3.1.2.45.1.6.1.8 | TmnxMldVersion | read-only | The value of the object tlsMldSnpgMRouterVersion indicates the version of the MLD protocol used by this multicast router. |
| U32 tlsMldSnpgMRouterExpiryTime | 1.3.6.1.4.1.6527.3.1.2.45.1.6.1.9 | Unsigned32 | read-only | The value of the object tlsMldSnpgMRouterExpiryTime indicates the time in seconds after which this multicast router is no longer known in this Tls. |
| TIK tlsMldSnpgMRouterUpTime | 1.3.6.1.4.1.6527.3.1.2.45.1.6.1.10 | TimeTicks | read-only | The value of the object tlsMldSnpgMRouterUpTime indicates how long (in hundredths of a second) that this multicast router has been known in this Tls. |
| U32 tlsMldSnpgMRouterGenQueryIntvl | 1.3.6.1.4.1.6527.3.1.2.45.1.6.1.11 | Unsigned32 | read-only | The value of the obejct tlsMldSnpgMRouterGenQueryIntvl indicates the General Query Interval used by this multicast router. |
| U32 tlsMldSnpgMRouterGenRespIntvl | 1.3.6.1.4.1.6527.3.1.2.45.1.6.1.12 | Unsigned32 | read-only | The value of the object tlsMldSnpgMRouterGenRespIntvl indicates the General Query Response interval (in 1/10 seconds) used by this multicast router. |
| U32 tlsMldSnpgMRouterRobustCount | 1.3.6.1.4.1.6527.3.1.2.45.1.6.1.13 | Unsigned32 | read-only | The value of the object tlsMldSnpgMRouterRobustCount indicates the Robust Count value used by this multicast router. |
| tmnxMldSnoopingSapObjs | 1.3.6.1.4.1.6527.3.1.2.45.2 | |||
| TIM sapMldSnpgConfigTableLastChange | 1.3.6.1.4.1.6527.3.1.2.45.2.1 | TimeStamp | read-only | The value of the object sapMldSnpgConfigTableLastChange indicates the value of sysUpTime at the time of the last modification of an entry in the sapMldSnpgConfigTable. |
| sapMldSnpgConfigTable | 1.3.6.1.4.1.6527.3.1.2.45.2.2 | not-accessible | The sapMldSnpgConfigTable contains objects to configure the MLD snooping feature on a SAP within a Tls. | |
| sapMldSnpgConfigEntry | 1.3.6.1.4.1.6527.3.1.2.45.2.2.1 | not-accessible | Each row contains MLD snooping configuration parameters for a SAP within a Tls. Entries in this table cannot be created or deleted via SNMP operations. An entry in this table will be created by the agent upon creation of a new SAP (sapTlsInfoTable). The entry is destroyed when the SAP or Tls service is removed. | |
| TIM sapMldSnpgCfgLastChangeTime | 1.3.6.1.4.1.6527.3.1.2.45.2.2.1.1 | TimeStamp | read-only | The value of the object sapMldSnpgCfgLastChangeTime indicates the sysUpTime at the time of the last modification of this entry. |
| TPO sapMldSnpgCfgImportPlcy | 1.3.6.1.4.1.6527.3.1.2.45.2.2.1.2 | TPolicyStatementNameOrEmpty | read-write | The value of the object sapMldSnpgCfgImportPlcy specifies the policy statement that must be applied to all incoming MLD messages on this SAP. |
| TMN sapMldSnpgCfgFastLeave | 1.3.6.1.4.1.6527.3.1.2.45.2.2.1.3 | TmnxAdminState | read-write | The value of the object sapMldSnpgCfgFastLeave specifies whether fast leave is allowed on this SAP. If set to 'inService(2)', the system prunes the port on which an MLD 'leave' message has been received, without waiting for the Group Specific Query to timeout. |
| T/F sapMldSnpgCfgMRouter | 1.3.6.1.4.1.6527.3.1.2.45.2.2.1.4 | TruthValue | read-write | The value of the object sapMldSnpgCfgMRouter specifies whether a multicast router is attached behind this SAP. If sapMldSnpgCfgSendQueries is set to 'inService(2)', the system acts as if this object was set to 'false(2)'. |
| TMN sapMldSnpgCfgSendQueries | 1.3.6.1.4.1.6527.3.1.2.45.2.2.1.5 | TmnxAdminState | read-write | The value of the object sapMldSnpgCfgSendQueries specifies whether the system generates General Queries by itself on this SAP. |
| U32 sapMldSnpgCfgGenQueryIntvl | 1.3.6.1.4.1.6527.3.1.2.45.2.2.1.6 | Unsigned32 | read-write | The value of the object sapMldSnpgCfgGenQueryIntvl specifies the interval (in seconds) between two consecutive general queries sent by the system on this SAP. The value of this object is only meaningful when the value of sapMldSnpgCfgSendQueries is 'inService(2)'. |
| U32 sapMldSnpgCfgQueryRespIntvl | 1.3.6.1.4.1.6527.3.1.2.45.2.2.1.7 | Unsigned32 | read-write | The value of the object sapMldSnpgCfgQueryRespIntvl specifies the maximum response time (in seconds) advertised in MLD queries. The value of this object is only meaningful when the value of sapMldSnpgCfgSendQueries is 'inService(2)'. |
| U32 sapMldSnpgCfgRobustCount | 1.3.6.1.4.1.6527.3.1.2.45.2.2.1.8 | Unsigned32 | read-write | The value of the object sapMldSnpgCfgRobustCount specifies the robustness variable on this SAP. This object allows tuning for the expected packet loss on this SAP. If a SAP is expected to be lossy, the Robustness Variable may be increased. MLD snooping is robust to (Robustness Variable-1) packet losses. The value of this object is only meaningful when the value of sapMldSnpgCfgSendQueries is 'inService(2)'. |
| U32 sapMldSnpgCfgLastMembIntvl | 1.3.6.1.4.1.6527.3.1.2.45.2.2.1.9 | Unsigned32 | read-write | The value of the object sapMldSnpgCfgLastMembIntvl specifies the Max Response Time (in tenths of a second) used in Group-Specific and Group-Source-Specific Queries sent in response to 'leave' messages. This is also the amount of time between Group-Specific Query messages. This value may be tuned to modify the leave latency of the network. A reduced value results in reduced time to detect the loss of the last member of a group. |
| INT sapMldSnpgCfgMaxNbrGrps | 1.3.6.1.4.1.6527.3.1.2.45.2.2.1.10 | INTEGER | read-write | The value of the object sapMldSnpgCfgMaxNbrGrps specifies how many group addresses are allowed for this SAP. The value 0 means that no limit is imposed. |
| TMN sapMldSnpgCfgMvrFromVplsId | 1.3.6.1.4.1.6527.3.1.2.45.2.2.1.11 | TmnxServId | read-write | The value of the object sapMldSnpgCfgMvrFromVplsId specifies from which Tls the multicast streams corresponding to the groups learned via this SAP are copied. Groups which cannot be joined to the corresponding MVR Tls (because MVR is not up or the configured MVR policy rejects the group) copy the multicast streams from the local Tls if MLD snooping is up (i.e. tlsMldSnpgCfgAdminState is 'inService(2)'). |
| TMN sapMldSnpgCfgMvrToSapPortId | 1.3.6.1.4.1.6527.3.1.2.45.2.2.1.12 | TmnxPortID | read-write | The value of the object sapMldSnpgCfgMvrToSapPortId specifies, together with sapMldSnpgCfgMvrToSapEncapVal, the SAP to which the multicast streams corresponding to the groups learned via this SAP are copied. As a consequence, the streams will not exit this SAP anymore. |
| TMN sapMldSnpgCfgMvrToSapEncapVal | 1.3.6.1.4.1.6527.3.1.2.45.2.2.1.13 | TmnxEncapVal | read-write | The value of the object sapMldSnpgCfgMvrToSapEncapVal specifies, together with sapMldSnpgCfgMvrToSapPortId, the SAP to which the multicast streams corresponding to the groups learned via this SAP are copied. As a consequence, the streams will not exit this SAP anymore. |
| TMN sapMldSnpgCfgVersion | 1.3.6.1.4.1.6527.3.1.2.45.2.2.1.14 | TmnxMldVersion | read-write | The value of the object sapMldSnpgCfgVersion specifies the version of MLD running on this SAP. |
| T/F sapMldSnpgCfgDisRtrAlertChk | 1.3.6.1.4.1.6527.3.1.2.45.2.2.1.15 | TruthValue | read-write | sapMldSnpgCfgDisRtrAlertChk is used to enable/disable router alert checking for IGMP messages received on this sap. If this flag is set to 'true', checking is disabled. |
| sapMldSnpgGroupTable | 1.3.6.1.4.1.6527.3.1.2.45.2.3 | not-accessible | sapMldSnpgGroupTable contains, together with the table sapMldSnpgGrpSrcTable, multicast group address information collected by MLD snooping for each SAP. | |
| sapMldSnpgGroupEntry | 1.3.6.1.4.1.6527.3.1.2.45.2.3.1 | not-accessible | Each entry in this table indicates a multicast group address learned by MLD snooping on this SAP. If a source list is present, it is described in the corresponding entries of the sapMldSnpgGrpSrcTable table. | |
| IPt sapMldSnpgGrpAddressType | 1.3.6.1.4.1.6527.3.1.2.45.2.3.1.1 | InetAddressType | not-accessible | The value of the object sapMldSnpgGrpAddressType indicates the type of sapMldSnpgGrpAddress. |
| IP sapMldSnpgGrpAddress | 1.3.6.1.4.1.6527.3.1.2.45.2.3.1.2 | InetAddress | not-accessible | The value of the object sapMldSnpgGrpAddress indicates the IPv6 multicast group address for which this entry contains information. |
| TMN sapMldSnpgGrpType | 1.3.6.1.4.1.6527.3.1.2.45.2.3.1.3 | TmnxMldGroupType | read-only | The value of the object sapMldSnpgGrpType indicates whether this entry was learned dynamically or was statically configured. |
| TMN sapMldSnpgGrpFilterMode | 1.3.6.1.4.1.6527.3.1.2.45.2.3.1.4 | TmnxMldGroupFilterMode | read-only | The value of the object sapMldSnpgGrpFilterMode indicates the filter-mode for this group. |
| TIK sapMldSnpgGrpUpTime | 1.3.6.1.4.1.6527.3.1.2.45.2.3.1.5 | TimeTicks | read-only | The value of the object sapMldSnpgGrpUpTime indicates how long (in hundredths of a second) that the group address already exists in the database for this SAP. |
| U32 sapMldSnpgGrpExpiryTime | 1.3.6.1.4.1.6527.3.1.2.45.2.3.1.6 | Unsigned32 | read-only | The value of the object sapMldSnpgGrpExpiryTime indicates the amount of time remaining before this entry will be aged out. |
| U32 sapMldSnpgGrpCompatMode | 1.3.6.1.4.1.6527.3.1.2.45.2.3.1.7 | Unsigned32 | read-only | The value of the object sapMldSnpgGrpCompatMode indicates the MLD version applicable on this SAP for this multicast group address. This corresponds to the lowest version seen for this group address on this SAP. |
| U32 sapMldSnpgGrpV1HostExpTime | 1.3.6.1.4.1.6527.3.1.2.45.2.3.1.8 | Unsigned32 | read-only | The value of the object sapMldSnpgGrpV1HostExpTime indicates the time remaining until the system will assume that there are no longer any MLDv1 members on this SAP. Upon hearing any MLDv1 Membership Report, this value is reset to the group membership interval. While this time remaining is non-zero, the system ignores any MLDv2 'leave' messages for this group that it receives on this SAP. |
| TMN sapMldSnpgGrpMvrFromVplsId | 1.3.6.1.4.1.6527.3.1.2.45.2.3.1.9 | TmnxServId | read-only | The value of the object sapMldSnpgGrpMvrFromVplsId indicates from which Tls the multicast streams corresponding to this group are copied. A value of 0 means that MVR is not applicable for this group and the corresponding streams is copied from the local Tls. |
| TMN sapMldSnpgGrpMvrToSapPortId | 1.3.6.1.4.1.6527.3.1.2.45.2.3.1.10 | TmnxPortID | read-only | The value of the object sapMldSnpgGrpMvrToSapPortId indicates, together with sapMldSnpgGrpMvrToSapEncapVal, the SAP to which the multicast streams corresponding to this group are copied. If both values are 0, the corresponding streams are copied to this local SAP. |
| TMN sapMldSnpgGrpMvrToSapEncapVal | 1.3.6.1.4.1.6527.3.1.2.45.2.3.1.11 | TmnxEncapVal | read-only | The value of the object sapMldSnpgGrpMvrToSapEncapVal indicates, together with sapMldSnpgGrpMvrToSapPortId, the SAP to which the multicast streams corresponding to this group are copied. If both values are 0, the corresponding streams are copied to this local SAP. |
| sapMldSnpgGrpSrcTable | 1.3.6.1.4.1.6527.3.1.2.45.2.4 | not-accessible | sapMldSnpgGrpSrcTable lists the IPv6 multicast sources corresponding to the IPv6 multicast groups listed in the sapMldSnpgGroupTable. | |
| sapMldSnpgGrpSrcEntry | 1.3.6.1.4.1.6527.3.1.2.45.2.4.1 | not-accessible | An entry in the sapMldSnpgGrpSrcTable. Each entry represents a source address from which receivers are interested/not interested in receiving multicast traffic from. | |
| IPt sapMldSnpgGrpSrcAddrType | 1.3.6.1.4.1.6527.3.1.2.45.2.4.1.1 | InetAddressType | not-accessible | The value of the object sapMldSnpgGrpSrcAddrType indicates the type of sapMldSnpgGrpSrcAddr. |
| IP sapMldSnpgGrpSrcAddr | 1.3.6.1.4.1.6527.3.1.2.45.2.4.1.2 | InetAddress | not-accessible | The value of the object sapMldSnpgGrpSrcAddr indicates the address of the source sending multicast traffic to the group identified by sapMldSnpgGrpAddress. If the value of sapMldSnpgGrpFilterMode corresponding to this entry is 'include(1)', the receivers are interested in receiving traffic from this source. If the value of sapMldSnpgGrpFilterMode corresponding to this entry is 'exclude(2)', the receivers are not interested in receiving traffic from this source. |
| TMN sapMldSnpgGrpSrcType | 1.3.6.1.4.1.6527.3.1.2.45.2.4.1.3 | TmnxMldGroupType | read-only | The value of the object sapMldSnpgGrpSrcType indicates how this source entry was learned. If this source entry was learned, this object is set to 'dynamic(2)'. For statically configured sources, this object is set to 'static(1)'. |
| TIK sapMldSnpgGrpSrcUpTime | 1.3.6.1.4.1.6527.3.1.2.45.2.4.1.4 | TimeTicks | read-only | The value of the object sapMldSnpgGrpSrcUpTime indicates how long (in hundredths of a second) that the source address already exists in the database for this SAP. |
| U32 sapMldSnpgGrpSrcExpiryTime | 1.3.6.1.4.1.6527.3.1.2.45.2.4.1.5 | Unsigned32 | read-only | The value of the object sapMldSnpgGrpSrcExpiryTime indicates the minimum amount of time remaining before this entry will be aged out. If the value of sapMldSnpgGrpSrcExpiryTime is non-zero and the value of sapMldSnpgGrpFilterMode corresponding to this entry is 'include(1)', it means that there are currently one or more systems which desire to receive multicast traffic for this source. If this timer expires and the value of sapMldSnpgGrpFilterMode is 'include(1)', the system concludes that traffic from this particular source is no longer desired on the attached network, and deletes this entry. If the value of sapMldSnpgGrpSrcExpiryTime is non-zero and the filter-mode for the group is 'exclude(2)', it means that at least one system desires to receive multicast traffic from this source. If the value of sapMldSnpgGrpSrcExpiryTime is zero and the filter-mode for the group is 'exclude(2)', it means that no system desires to receive multicast traffic from this source. |
| TIM sapMldSnpgStaticGrpSrcTableLstCh | 1.3.6.1.4.1.6527.3.1.2.45.2.5 | TimeStamp | read-only | The value of the object sapMldSnpgStaticGrpSrcTableLstCh indicates the value of sysUpTime at the time of the last modification of an entry in the sapMldSnpgStaticGrpSrcTable. |
| sapMldSnpgStaticGrpSrcTable | 1.3.6.1.4.1.6527.3.1.2.45.2.6 | not-accessible | The table sapMldSnpgStaticGrpSrcTable contains statically configured (S,G) entries for each SAP. | |
| sapMldSnpgStaticGrpSrcEntry | 1.3.6.1.4.1.6527.3.1.2.45.2.6.1 | not-accessible | An entry in the sapMldSnpgStaticGrpSrcTable. Entries can be created or deleted by an SNMP SET request to sapMldSnpgStaticRowstatus. | |
| IPt sapMldSnpgStaticGroupAddrType | 1.3.6.1.4.1.6527.3.1.2.45.2.6.1.1 | InetAddressType | not-accessible | The value of the object sapMldSnpgStaticGroupAddrType specifies the type of sapMldSnpgStaticGroupAddr. |
| IP sapMldSnpgStaticGroupAddr | 1.3.6.1.4.1.6527.3.1.2.45.2.6.1.2 | InetAddress | not-accessible | The value of the object sapMldSnpgStaticGroupAddr specifies the group multicast address for this statically configured (S,G) entry for this SAP. |
| IPt sapMldSnpgStaticSourceAddrType | 1.3.6.1.4.1.6527.3.1.2.45.2.6.1.3 | InetAddressType | not-accessible | The value of the object sapMldSnpgStaticSourceAddrType specifies the type of sapMldSnpgStaticSourceAddr. |
| IP sapMldSnpgStaticSourceAddr | 1.3.6.1.4.1.6527.3.1.2.45.2.6.1.4 | InetAddress | not-accessible | The value of the object sapMldSnpgStaticSourceAddr specifies the source IP address for this statically configured (S,G) entry for this SAP. For a (*,G) entry, this object must be set to all zeros. |
| ROW sapMldSnpgStaticRowstatus | 1.3.6.1.4.1.6527.3.1.2.45.2.6.1.5 | RowStatus | read-create | The value of the object sapMldSnpgStaticRowstatus specifies the row status used for creation or deletion of sapMldSnpgStaticGrpSrcTable entries. |
| TIM sapMldSnpgStaticLastChangeTime | 1.3.6.1.4.1.6527.3.1.2.45.2.6.1.6 | TimeStamp | read-only | The value of the object sapMldSnpgStaticLastChangeTime indicates the sysUpTime at the time of the last modification of this entry. |
| sapMldSnpgStatsTable | 1.3.6.1.4.1.6527.3.1.2.45.2.7 | not-accessible | sapMldSnpgStatsTable contains statistics on MLD snooping per SAP. | |
| sapMldSnpgStatsEntry | 1.3.6.1.4.1.6527.3.1.2.45.2.7.1 | not-accessible | sapMldSnpgStatsEntry is an entry in the sapMldSnpgStatsTable. Each entry contains MLD snooping statics for a SAP in a Tls. | |
| C32 sapMldSnpgTxGenQueriesEx | 1.3.6.1.4.1.6527.3.1.2.45.2.7.1.1 | Counter32 | read-only | The value of the object sapMldSnpgTxGenQueries indicates the number of MLD General Queries transmitted on this SAP. |
| C32 sapMldSnpgTxGrpSpecQueries | 1.3.6.1.4.1.6527.3.1.2.45.2.7.1.2 | Counter32 | read-only | The value of the object sapMldSnpgTxGrpSpecQueries indicates the number of MLD Group-Specific Queries transmitted on this SAP. |
| C32 sapMldSnpgTxSrcSpecQueries | 1.3.6.1.4.1.6527.3.1.2.45.2.7.1.3 | Counter32 | read-only | The value of the object sapMldSnpgTxSrcSpecQueries indicates the number of MLD Group-And-Source-Specific Queries transmitted on this SAP. |
| C32 sapMldSnpgTxV1Reports | 1.3.6.1.4.1.6527.3.1.2.45.2.7.1.4 | Counter32 | read-only | The value of the object sapMldSnpgTxV1Reports indicates the number of MLDv1 Reports transmitted on this SAP. |
| C32 sapMldSnpgTxV2Reports | 1.3.6.1.4.1.6527.3.1.2.45.2.7.1.5 | Counter32 | read-only | The value of the object sapMldSnpgTxV2Reports indicates the number of MLDv2 Reports transmitted on this SAP. |
| C32 sapMldSnpgTxV1Leaves | 1.3.6.1.4.1.6527.3.1.2.45.2.7.1.6 | Counter32 | read-only | The value of the object sapMldSnpgTxV1Leaves indicates the number of MLDv1 Leaves transmitted on this SAP. |
| C32 sapMldSnpgRxGenQueries | 1.3.6.1.4.1.6527.3.1.2.45.2.7.1.7 | Counter32 | read-only | The value of the object sapMldSnpgRxGenQueries indicates the number of MLD General Queries received on this SAP. |
| C32 sapMldSnpgRxGrpSpecQueries | 1.3.6.1.4.1.6527.3.1.2.45.2.7.1.8 | Counter32 | read-only | The value of the object sapMldSnpgRxGrpSpecQueries indicates the number of MLD Group-Specific Queries received on this SAP. |
| C32 sapMldSnpgRxSrcSpecQueries | 1.3.6.1.4.1.6527.3.1.2.45.2.7.1.9 | Counter32 | read-only | The value of the object sapMldSnpgRxSrcSpecQueries indicates the number of MLD Group-And-Source-Specific Queries received on this SAP. |
| C32 sapMldSnpgRxV1Reports | 1.3.6.1.4.1.6527.3.1.2.45.2.7.1.10 | Counter32 | read-only | The value of the object sapMldSnpgRxV1Reports indicates the number of MLDv1 Reports received on this SAP. |
| C32 sapMldSnpgRxV2Reports | 1.3.6.1.4.1.6527.3.1.2.45.2.7.1.11 | Counter32 | read-only | The value of the object sapMldSnpgRxV2Reports indicates the number of MLDv2 Reports received on this SAP. |
| C32 sapMldSnpgRxV1Leaves | 1.3.6.1.4.1.6527.3.1.2.45.2.7.1.12 | Counter32 | read-only | The value of the object sapMldSnpgRxV1Leaves indicates the number of MLDv1 Leaves received on this SAP. |
| C32 sapMldSnpgRxUnknownType | 1.3.6.1.4.1.6527.3.1.2.45.2.7.1.13 | Counter32 | read-only | The value of the object sapMldSnpgRxUnknownType indicates the number of MLD unknown type packets received on this SAP. |
| C32 sapMldSnpgFwdGenQueries | 1.3.6.1.4.1.6527.3.1.2.45.2.7.1.14 | Counter32 | read-only | The value of the object sapMldSnpgFwdGenQueries indicates the number of MLD General Queries forwarded on this SAP. |
| C32 sapMldSnpgFwdGrpSpecQueries | 1.3.6.1.4.1.6527.3.1.2.45.2.7.1.15 | Counter32 | read-only | The value of the object sapMldSnpgFwdGrpSpecQueries indicates the number of MLD Group-Specific Queries forwarded on this SAP. |
| C32 sapMldSnpgFwdSrcSpecQueries | 1.3.6.1.4.1.6527.3.1.2.45.2.7.1.16 | Counter32 | read-only | The value of the object sapMldSnpgFwdSrcSpecQueries indicates the number of MLD Group-And-Source-Specific Queries forwarded on this SAP. |
| C32 sapMldSnpgFwdV1Reports | 1.3.6.1.4.1.6527.3.1.2.45.2.7.1.17 | Counter32 | read-only | The value of the object sapMldSnpgFwdV1Reports indicates the number of MLDv1 Reports forwarded on this SAP. |
| C32 sapMldSnpgFwdV2Reports | 1.3.6.1.4.1.6527.3.1.2.45.2.7.1.18 | Counter32 | read-only | The value of the object sapMldSnpgFwdV2Reports indicates the number of MLDv2 Reports forwarded on this SAP. |
| C32 sapMldSnpgFwdV1Leaves | 1.3.6.1.4.1.6527.3.1.2.45.2.7.1.19 | Counter32 | read-only | The value of the object sapMldSnpgFwdV1Leaves indicates the number of MLDv1 Leaves forwarded on this SAP. |
| C32 sapMldSnpgFwdUnknownType | 1.3.6.1.4.1.6527.3.1.2.45.2.7.1.20 | Counter32 | read-only | The value of the object sapMldSnpgFwdUnknownType indicates the number of MLD unknown type packets forwarded on this SAP. |
| C32 sapMldSnpgRxBadLenPkts | 1.3.6.1.4.1.6527.3.1.2.45.2.7.1.21 | Counter32 | read-only | The value of the object sapMldSnpgRxBadLenPkts indicates the number of MLD packets dropped on this SAP because of a bad length. |
| C32 sapMldSnpgRxBadMldChksmPkts | 1.3.6.1.4.1.6527.3.1.2.45.2.7.1.22 | Counter32 | read-only | The value of the object sapMldSnpgRxBadMldChksmPkts indicates the number of dropped MLD packets on this SAP because of a bad MLD header checksum. |
| C32 sapMldSnpgRxBadEncodedPkts | 1.3.6.1.4.1.6527.3.1.2.45.2.7.1.23 | Counter32 | read-only | The value of the object sapMldSnpgRxBadEncodedPkts indicates the number of MLD packets dropped on this SAP because of a bad encoding. |
| C32 sapMldSnpgRxNoRtrAlertPkts | 1.3.6.1.4.1.6527.3.1.2.45.2.7.1.24 | Counter32 | read-only | The value of the object sapMldSnpgRxNoRtrAlertPkts indicates the number of MLD packets dropped on this SAP because the Router Alert Option in the IP packet is not set. |
| C32 sapMldSnpgRxZeroSrcAdrPkts | 1.3.6.1.4.1.6527.3.1.2.45.2.7.1.25 | Counter32 | read-only | The value of the object sapMldSnpgRxZeroSrcAdrPkts indicates the number of MLD packets dropped on this SAP because they contain a zero source IPv6 address. |
| C32 sapMldSnpgSendQueryCfgDrops | 1.3.6.1.4.1.6527.3.1.2.45.2.7.1.26 | Counter32 | read-only | The value of the object sapMldSnpgSendQueryCfgDrops indicates the number of times an MLD Query is dropped because the object sapMldSnpgCfgSendQueries for this SAP is set to 'inService(2)'. |
| C32 sapMldSnpgImportPolicyDrops | 1.3.6.1.4.1.6527.3.1.2.45.2.7.1.27 | Counter32 | read-only | The value of the object sapMldSnpgImportPolicyDrops indicates the number of times an MLD group or source is dropped because of applying an import policy on this SAP. |
| C32 sapMldSnpgMaxNumGroupsDrops | 1.3.6.1.4.1.6527.3.1.2.45.2.7.1.28 | Counter32 | read-only | The value of the object sapMldSnpgMaxNumGroupsDrops indicates the number of times an MLD group is dropped because of exceeding the configured maximum number of groups on this SAP. |
| C32 sapMldSnpgMvrFromVplsCfgDrops | 1.3.6.1.4.1.6527.3.1.2.45.2.7.1.29 | Counter32 | read-only | The value of the object sapMldSnpgMvrFromVplsCfgDrops indicates the number of times an MLD group or Query is dropped because of applying the sapMldSnpgCfgMvrFromVplsId configuration on this SAP. |
| C32 sapMldSnpgMvrToSapCfgDrops | 1.3.6.1.4.1.6527.3.1.2.45.2.7.1.30 | Counter32 | read-only | The value of the object sapMldSnpgMvrToSapCfgDrops indicates the number times an MLD Report or Query is dropped because of applying the sapMldSnpgCfgMvrToSapPortId and sapMldSnpgCfgMvrToSapEncapVal configuration on this SAP. |
| C32 sapMldSnpgRxWrongVersionPkts | 1.3.6.1.4.1.6527.3.1.2.45.2.7.1.31 | Counter32 | read-only | The value of the object sapMldSnpgRxWrongVersionPkts indicates the total number of MLD packets with a wrong version received on this SAP. |
| C32 sapMldSnpgMcsFailures | 1.3.6.1.4.1.6527.3.1.2.45.2.7.1.32 | Counter32 | read-only | The value of the object sapMldSnpgMcsFailures indicates the number of times an MLD group on this SAP could not be synced to the MCS (multi-chassis synchronization) database. |
| C32 sapMldSnpgRxLocalScopePkts | 1.3.6.1.4.1.6527.3.1.2.45.2.7.1.33 | Counter32 | read-only | The value of the object sapMldSnpgRxLocalScopePkts indicates the number of MLD packets received on the link-local scope IPv6 multicast address. |
| C32 sapMldSnpgRxRsvdScopePkts | 1.3.6.1.4.1.6527.3.1.2.45.2.7.1.34 | Counter32 | read-only | The value of the object sapMldSnpgRxRsvdScopePkts indicates the number of MLD packets received on the reserved scope IPv6 multicast address. |
| tmnxMldSnoopingSdpBindObjs | 1.3.6.1.4.1.6527.3.1.2.45.3 | |||
| TIM sdpBindMldSnpgConfigTableLastCh | 1.3.6.1.4.1.6527.3.1.2.45.3.1 | TimeStamp | read-only | The value of the object sdpBindMldSnpgConfigTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the sdpBindMldSnpgConfigTable. |
| sdpBindMldSnpgConfigTable | 1.3.6.1.4.1.6527.3.1.2.45.3.2 | not-accessible | The table sdpBindMldSnpgConfigTable contains objects to configure the MLD snooping feature on an SDP Bind within a Tls. | |
| sdpBindMldSnpgConfigEntry | 1.3.6.1.4.1.6527.3.1.2.45.3.2.1 | not-accessible | Each row contains MLD snooping configuration parameters for an SDP bind within a Tls. Entries in this table cannot be created or deleted via SNMP operations. An entry in this table will be created by the agent upon creation of a new SDP Bind (sdpBindTlsEntry). The entry is destroyed when the SDP or Tls service is removed. | |
| TIM sdpBndMldSnpgCfgLastChangeTime | 1.3.6.1.4.1.6527.3.1.2.45.3.2.1.1 | TimeStamp | read-only | The value of the object sdpBndMldSnpgCfgLastChangeTime indicates the sysUpTime at the time of the last modification of this entry. |
| TPO sdpBndMldSnpgCfgImportPlcy | 1.3.6.1.4.1.6527.3.1.2.45.3.2.1.2 | TPolicyStatementNameOrEmpty | read-write | The value of the object sdpBndMldSnpgCfgImportPlcy specifies a policy statement that must be applied to all incoming MLD messages on this SDP Bind. |
| TMN sdpBndMldSnpgCfgFastLeave | 1.3.6.1.4.1.6527.3.1.2.45.3.2.1.3 | TmnxAdminState | read-write | The value of the object sdpBndMldSnpgCfgFastLeave specifies whether or not fastleave is allowed on this SDP bind. If set to 'inService(2)', the system prunes the port on which a MLD 'leave' message has been received without waiting for the Group Specific Query to timeout. |
| T/F sdpBndMldSnpgCfgMRouter | 1.3.6.1.4.1.6527.3.1.2.45.3.2.1.4 | TruthValue | read-write | The value of the object sdpBndMldSnpgCfgMRouter specifies whether a multicast router is attached behind this SDP. If sdpBndMldSnpgCfgSendQueries is set to 'inService(2)', the system acts as if this object was set to 'false(2)'. |
| TMN sdpBndMldSnpgCfgSendQueries | 1.3.6.1.4.1.6527.3.1.2.45.3.2.1.5 | TmnxAdminState | read-write | The value of the object sdpBndMldSnpgCfgSendQueries specifies whether the system generates General Queries by itself on this SDP. |
| U32 sdpBndMldSnpgCfgGenQueryIntvl | 1.3.6.1.4.1.6527.3.1.2.45.3.2.1.6 | Unsigned32 | read-write | The value of the object sdpBndMldSnpgCfgGenQueryIntvl specifies the interval (in seconds) between two consecutive general queries sent by the system on this SDP. The value of this object is only meaningful when the value of sdpBndMldSnpgCfgSendQueries is 'inService(2)'. |
| U32 sdpBndMldSnpgCfgQueryRespIntvl | 1.3.6.1.4.1.6527.3.1.2.45.3.2.1.7 | Unsigned32 | read-write | The value of the object sdpBndMldSnpgCfgQueryRespIntvl specifies the maximum response time (in seconds) advertised in MLD queries. The value of this object is only meaningful when the value of sdpBndMldSnpgCfgSendQueries is 'inService(2)'. |
| U32 sdpBndMldSnpgCfgRobustCount | 1.3.6.1.4.1.6527.3.1.2.45.3.2.1.8 | Unsigned32 | read-write | The value of the object sdpBndMldSnpgCfgRobustCount specifies the value of the Robust count. This object allows tuning for the expected packet loss on this SDP. If a SDP is expected to be lossy, the Robustness Variable may be increased. MLD snooping is robust to (Robustness Variable-1) packet losses. The value of this object is only meaningful when the value of sdpBndMldSnpgCfgSendQueries is 'inService(2)'. |
| U32 sdpBndMldSnpgCfgLastMembIntvl | 1.3.6.1.4.1.6527.3.1.2.45.3.2.1.9 | Unsigned32 | read-write | The value of the object sdpBndMldSnpgCfgLastMembIntvl specifies the Max Response Time (in tenths of a second) used in Group-Specific and Group-Source-Specific Queries sent in response to 'leave' messages. This is also the amount of time between Group-Specific Query messages. This value may be tuned to modify the leave latency of the network. A reduced value results in reduced time to detect the loss of the last member of a group. |
| INT sdpBndMldSnpgCfgMaxNbrGrps | 1.3.6.1.4.1.6527.3.1.2.45.3.2.1.10 | INTEGER | read-write | The value of the object sdpBndMldSnpgCfgMaxNbrGrps specifies how many group addresses are allowed for this SDP bind. The value 0 means that no limit is imposed. |
| TMN sdpBndMldSnpgCfgVersion | 1.3.6.1.4.1.6527.3.1.2.45.3.2.1.11 | TmnxMldVersion | read-write | The value of the object sdpBndMldSnpgCfgVersion specifies the version of MLD running on this SDP bind. |
| T/F sdpBndMldSnpgCfgDisRtrAlertChk | 1.3.6.1.4.1.6527.3.1.2.45.3.2.1.12 | TruthValue | read-write | sdpBndMldSnpgCfgDisRtrAlertChk is used to enable/disable router alert checking for IGMP messages received on this sdp. If this flag is set to 'true', checking is disabled. |
| sdpBindMldSnpgGroupTable | 1.3.6.1.4.1.6527.3.1.2.45.3.3 | not-accessible | sdpBindMldSnpgGroupTable contains, together with the table sdpBindMldSnpgGrpSrcTable, multicast group address information collected by MLD snooping for each SDP Bind. | |
| sdpBindMldSnpgGroupEntry | 1.3.6.1.4.1.6527.3.1.2.45.3.3.1 | not-accessible | Each entry in this table indicates a multicast group address learned by MLD snooping on this SDP Bind. If a source list is present, it is described in the corresponding entries of the sdpBindMldSnpgGrpSrcTable table. | |
| IPt sdpBndMldSnpgGrpAddressType | 1.3.6.1.4.1.6527.3.1.2.45.3.3.1.1 | InetAddressType | not-accessible | The value of the object sdpBndMldSnpgGrpAddressType indicates the type of sdpBndMldSnpgGrpAddress. |
| IP sdpBndMldSnpgGrpAddress | 1.3.6.1.4.1.6527.3.1.2.45.3.3.1.2 | InetAddress | not-accessible | The value of the object sdpBndMldSnpgGrpAddress indicates the IPv6 multicast group address for which this entry contains information. |
| TMN sdpBndMldSnpgGrpType | 1.3.6.1.4.1.6527.3.1.2.45.3.3.1.3 | TmnxMldGroupType | read-only | The value of the object sdpBndMldSnpgGrpType indicates whether this entry was learned dynamically or was statically configured. |
| TMN sdpBndMldSnpgGrpFilterMode | 1.3.6.1.4.1.6527.3.1.2.45.3.3.1.4 | TmnxMldGroupFilterMode | read-only | The value of the object sdpBndMldSnpgGrpFilterMode indicates the filter-mode for this group. |
| TIK sdpBndMldSnpgGrpUpTime | 1.3.6.1.4.1.6527.3.1.2.45.3.3.1.5 | TimeTicks | read-only | The value of the object sdpBndMldSnpgGrpUpTime indicates how long (in hundredths of a second) that the group address already exists in the database for this SDP Bind. |
| U32 sdpBndMldSnpgGrpExpiryTime | 1.3.6.1.4.1.6527.3.1.2.45.3.3.1.6 | Unsigned32 | read-only | The value of the object sdpBndMldSnpgGrpExpiryTime indicates the amount of time remaining before this entry will be aged out. |
| U32 sdpBndMldSnpgGrpCompatMode | 1.3.6.1.4.1.6527.3.1.2.45.3.3.1.7 | Unsigned32 | read-only | The value of the object sdpBndMldSnpgGrpCompatMode indicates the MLD version applicable on this SDP Bind for this multicast group address. This corresponds to the lowest version seen for this group address on this SDP Bind. |
| U32 sdpBndMldSnpgGrpV1HostExpTime | 1.3.6.1.4.1.6527.3.1.2.45.3.3.1.8 | Unsigned32 | read-only | The value of the object sdpBndMldSnpgGrpV1HostExpTime indicates the time remaining until the system will assume that there are no longer any MLDv1 members on this SDP Bind. Upon hearing any MLDv1 Membership Report, this value is reset to the group membership interval. While this time remaining is non-zero, the system ignores any MLDv2 'leave' messages for this group that it receives on this SDP Bind. |
| sdpBindMldSnpgGrpSrcTable | 1.3.6.1.4.1.6527.3.1.2.45.3.4 | not-accessible | sdpBindMldSnpgGrpSrcTable lists the IPv6 multicast sources corresponding to the IPv6 multicast groups listed in the sdpBindMldSnpgGroupTable. | |
| sdpBindMldSnpgGrpSrcEntry | 1.3.6.1.4.1.6527.3.1.2.45.3.4.1 | not-accessible | An entry in the sdpBindMldSnpgGrpSrcTable. Each entry represents a source address from which receivers are interested/not interested in receiving multicast traffic from. | |
| IPt sdpBndMldSnpgGrpSrcAddrType | 1.3.6.1.4.1.6527.3.1.2.45.3.4.1.1 | InetAddressType | not-accessible | The value of the object sdpBndMldSnpgGrpSrcAddrType indicates the type of sdpBndMldSnpgGrpSrcAddr. |
| IP sdpBndMldSnpgGrpSrcAddr | 1.3.6.1.4.1.6527.3.1.2.45.3.4.1.2 | InetAddress | not-accessible | The value of the object sdpBndMldSnpgGrpSrcAddr indicates the address of the source sending multicast traffic to the group identified by sdpBndMldSnpgGrpAddress. If the value of sdpBndMldSnpgGrpFilterMode corresponding to this entry is 'include(1)', the receivers are interested in receiving traffic from this source. If the value of sdpBndMldSnpgGrpFilterMode corresponding to this entry is 'exclude(2)' the receivers, are not interested in receiving traffic from this source. |
| TMN sdpBndMldSnpgGrpSrcType | 1.3.6.1.4.1.6527.3.1.2.45.3.4.1.3 | TmnxMldGroupType | read-only | The value of the object sdpBndMldSnpgGrpSrcType indicates how this source entry was learned. If this source entry was learned, this object is set to 'dynamic(2)'. For statically configured sources, this object is set to 'static(1)'. |
| TIK sdpBndMldSnpgGrpSrcUpTime | 1.3.6.1.4.1.6527.3.1.2.45.3.4.1.4 | TimeTicks | read-only | The value of the object sdpBndMldSnpgGrpSrcUpTime indicates how long (in hundredths of a second) that the source address already exists in the database for this SDP Bind. |
| U32 sdpBndMldSnpgGrpSrcExpiryTime | 1.3.6.1.4.1.6527.3.1.2.45.3.4.1.5 | Unsigned32 | read-only | The value of the object sdpBndMldSnpgGrpSrcExpiryTime indicates the minimum amount of time remaining before this entry will be aged out. If the value of sdpBndMldSnpgGrpSrcExpiryTime is non-zero and the value of sdpBndMldSnpgGrpFilterMode corresponding to this entry is 'include(1)', it means that there are currently one or more systems which desire to receive multicast traffic for this source. If this timer expires and the value of sdpBndMldSnpgGrpFilterMode is 'include(1)', the system concludes that traffic from this particular source is no longer desired on the attached network, and deletes this entry. If the value of sdpBndMldSnpgGrpSrcExpiryTime is non-zero and the filter-mode for the group is 'exclude(2)', it means that at least one system desires to receive multicast traffic from this source. If the value of sdpBndMldSnpgGrpSrcExpiryTime is zero and the filter-mode for the group is 'exclude(2)', it means that no system desires to receive multicast traffic from this source. |
| TIM sdpBindMldSnpgStatGrpSrcTblLstCh | 1.3.6.1.4.1.6527.3.1.2.45.3.5 | TimeStamp | read-only | The value of the object sdpBindMldSnpgStatGrpSrcTblLstCh indicates the value of sysUpTime at the time of the last modification of an entry in the sdpBindMldSnpgStatGrpSrcTable. |
| sdpBindMldSnpgStatGrpSrcTable | 1.3.6.1.4.1.6527.3.1.2.45.3.6 | not-accessible | The table sdpBindMldSnpgStatGrpSrcTable contains statically configured (S,G) entries for each SDP Bind. | |
| sdpBindMldSnpgStatGrpSrcEntry | 1.3.6.1.4.1.6527.3.1.2.45.3.6.1 | not-accessible | An entry in the sdpBindMldSnpgStatGrpSrcTable. Entries can be created or deleted by an SNMP SET request to sdpBndMldSnpgStaticRowstatus. | |
| IPt sdpBndMldSnpgStaticGroupAddrType | 1.3.6.1.4.1.6527.3.1.2.45.3.6.1.1 | InetAddressType | not-accessible | The value of the object sdpBndMldSnpgStaticGroupAddrType specifies the type of sdpBndMldSnpgStaticGroupAddr. |
| IP sdpBndMldSnpgStaticGroupAddr | 1.3.6.1.4.1.6527.3.1.2.45.3.6.1.2 | InetAddress | not-accessible | The value of the object sdpBndMldSnpgStaticGroupAddr specifies the group multicast address for this statically configured (S,G) entry for this SDP Bind. |
| IPt sdpBndMldSnpgStaticSourceAddrTp | 1.3.6.1.4.1.6527.3.1.2.45.3.6.1.3 | InetAddressType | not-accessible | The value of the object sdpBndMldSnpgStaticSourceAddrTp specifies the type of sdpBndMldSnpgStaticSourceAddr. |
| IP sdpBndMldSnpgStaticSourceAddr | 1.3.6.1.4.1.6527.3.1.2.45.3.6.1.4 | InetAddress | not-accessible | The value of the object sdpBndMldSnpgStaticSourceAddr specifies the source IP address for this statically configured (S,G) entry for this SDP Bind. For a (*,G) entry this object must be set to all zeros. |
| ROW sdpBndMldSnpgStaticRowstatus | 1.3.6.1.4.1.6527.3.1.2.45.3.6.1.5 | RowStatus | read-create | The value of the object sdpBndMldSnpgStaticRowstatus specifies the row status used for creation or deletion of sdpBindMldSnpgStatGrpSrcTable entries. |
| TIM sdpBndMldSnpgStaticLastChange | 1.3.6.1.4.1.6527.3.1.2.45.3.6.1.6 | TimeStamp | read-only | The value of the object sdpBndMldSnpgStaticLastChange indicates the sysUpTime at the time of the last modification of this entry. |
| sdpBindMldSnpgStatsTable | 1.3.6.1.4.1.6527.3.1.2.45.3.7 | not-accessible | sdpBindMldSnpgStatsTable contains statistics on MLD snooping per SDP Bind. | |
| sdpBindMldSnpgStatsEntry | 1.3.6.1.4.1.6527.3.1.2.45.3.7.1 | not-accessible | sdpBindMldSnpgStatsEntry is an entry in the sdpBindMldSnpgStatsTable. Each entry contains MLD snooping statics for a SDP Bind in a Tls. | |
| C32 sdpBndMldSnpgTxGenQueries | 1.3.6.1.4.1.6527.3.1.2.45.3.7.1.1 | Counter32 | read-only | The value of the object sdpBndMldSnpgTxGenQueries indicates the number of MLD General Queries transmitted on this SDP Bind. |
| C32 sdpBndMldSnpgTxGrpSpecQueries | 1.3.6.1.4.1.6527.3.1.2.45.3.7.1.2 | Counter32 | read-only | The value of the object sdpBndMldSnpgTxGrpSpecQueries indicates the number of MLD Group-Specific Queries transmitted on this SDP Bind. |
| C32 sdpBndMldSnpgTxSrcSpecQueries | 1.3.6.1.4.1.6527.3.1.2.45.3.7.1.3 | Counter32 | read-only | The value of the object sdpBndMldSnpgTxSrcSpecQueries indicates the number of MLD Group-And-Source-Specific Queries transmitted on this SDP Bind. |
| C32 sdpBndMldSnpgTxV1Reports | 1.3.6.1.4.1.6527.3.1.2.45.3.7.1.4 | Counter32 | read-only | The value of the object sdpBndMldSnpgTxV1Reports indicates the number of MLDv1 Reports transmitted on this SDP Bind. |
| C32 sdpBndMldSnpgTxV2Reports | 1.3.6.1.4.1.6527.3.1.2.45.3.7.1.5 | Counter32 | read-only | The value of the object sdpBndMldSnpgTxV2Reports indicates the number of MLDv2 Reports transmitted on this SDP Bind. |
| C32 sdpBndMldSnpgTxV1Leaves | 1.3.6.1.4.1.6527.3.1.2.45.3.7.1.6 | Counter32 | read-only | The value of the object sdpBndMldSnpgTxV1Leaves indicates the number of MLDv1 Leaves transmitted on this SDP Bind. |
| C32 sdpBndMldSnpgRxGenQueries | 1.3.6.1.4.1.6527.3.1.2.45.3.7.1.7 | Counter32 | read-only | The value of the object sdpBndMldSnpgRxGenQueries indicates the number of MLD General Queries received on this SDP Bind. |
| C32 sdpBndMldSnpgRxGrpSpecQueries | 1.3.6.1.4.1.6527.3.1.2.45.3.7.1.8 | Counter32 | read-only | The value of the object sdpBndMldSnpgRxGrpSpecQueries indicates the number of MLD Group-Specific Queries received on this SDP Bind. |
| C32 sdpBndMldSnpgRxSrcSpecQueries | 1.3.6.1.4.1.6527.3.1.2.45.3.7.1.9 | Counter32 | read-only | The value of the object sdpBndMldSnpgRxSrcSpecQueries indicates the number of MLD Group-And-Source-Specific Queries received on this SDP Bind. |
| C32 sdpBndMldSnpgRxV1Reports | 1.3.6.1.4.1.6527.3.1.2.45.3.7.1.10 | Counter32 | read-only | The value of the object sdpBndMldSnpgRxV1Reports indicates the number of MLDv1 Reports received on this SDP Bind. |
| C32 sdpBndMldSnpgRxV2Reports | 1.3.6.1.4.1.6527.3.1.2.45.3.7.1.11 | Counter32 | read-only | The value of the object sdpBndMldSnpgRxV2Reports indicates the number of MLDv2 Reports received on this SDP Bind. |
| C32 sdpBndMldSnpgRxV1Leaves | 1.3.6.1.4.1.6527.3.1.2.45.3.7.1.12 | Counter32 | read-only | The value of the object sdpBndMldSnpgRxV1Leaves indicates the number of MLDv1 Leaves received on this SDP Bind. |
| C32 sdpBndMldSnpgRxUnknownType | 1.3.6.1.4.1.6527.3.1.2.45.3.7.1.13 | Counter32 | read-only | The value of the object sdpBndMldSnpgRxUnknownType indicates the number of MLD unknown type packets received on this SDP Bind. |
| C32 sdpBndMldSnpgFwdGenQueries | 1.3.6.1.4.1.6527.3.1.2.45.3.7.1.14 | Counter32 | read-only | The value of the object sdpBndMldSnpgFwdGenQueries indicates the number of MLD General Queries forwarded on this SDP Bind. |
| C32 sdpBndMldSnpgFwdGrpSpecQueries | 1.3.6.1.4.1.6527.3.1.2.45.3.7.1.15 | Counter32 | read-only | The value of the object sdpBndMldSnpgFwdGrpSpecQueries indicates the number of MLD Group-Specific Queries forwarded on this SDP Bind. |
| C32 sdpBndMldSnpgFwdSrcSpecQueries | 1.3.6.1.4.1.6527.3.1.2.45.3.7.1.16 | Counter32 | read-only | The value of the object sdpBndMldSnpgFwdSrcSpecQueries indicates the number of MLD Group-And-Source-Specific Queries forwarded on this SDP Bind. |
| C32 sdpBndMldSnpgFwdV1Reports | 1.3.6.1.4.1.6527.3.1.2.45.3.7.1.17 | Counter32 | read-only | The value of the object sdpBndMldSnpgFwdV1Reports indicates the number of MLDv1 Reports forwarded on this SDP Bind. |
| C32 sdpBndMldSnpgFwdV2Reports | 1.3.6.1.4.1.6527.3.1.2.45.3.7.1.18 | Counter32 | read-only | The value of the object sdpBndMldSnpgFwdV2Reports indicates the number of MLDv2 Reports forwarded on this SDP Bind. |
| C32 sdpBndMldSnpgFwdV1Leaves | 1.3.6.1.4.1.6527.3.1.2.45.3.7.1.19 | Counter32 | read-only | The value of the object sdpBndMldSnpgFwdV1Leaves indicates the number of MLDv1 Leaves forwarded on this SDP Bind. |
| C32 sdpBndMldSnpgFwdUnknownType | 1.3.6.1.4.1.6527.3.1.2.45.3.7.1.20 | Counter32 | read-only | The value of the object sdpBndMldSnpgFwdUnknownType indicates the number of MLD unknown type packets forwarded on this SDP Bind. |
| C32 sdpBndMldSnpgRxBadLenPkts | 1.3.6.1.4.1.6527.3.1.2.45.3.7.1.21 | Counter32 | read-only | The value of the object sdpBndMldSnpgRxBadLenPkts indicates the number of MLD packets dropped on this SDP Bind because of a bad length. |
| C32 sdpBndMldSnpgRxBadMldChksmPkts | 1.3.6.1.4.1.6527.3.1.2.45.3.7.1.22 | Counter32 | read-only | The value of the object sdpBndMldSnpgRxBadMldChksmPkts indicates the number of dropped MLD packets on this SDP Bind because of a bad MLD header checksum. |
| C32 sdpBndMldSnpgRxBadEncodedPkts | 1.3.6.1.4.1.6527.3.1.2.45.3.7.1.23 | Counter32 | read-only | The value of the object sdpBndMldSnpgRxBadEncodedPkts indicates the number of MLD packets dropped on this SDP Bind because of a bad encoding. |
| C32 sdpBndMldSnpgRxNoRtrAlertPkts | 1.3.6.1.4.1.6527.3.1.2.45.3.7.1.24 | Counter32 | read-only | The value of the object sdpBndMldSnpgRxNoRtrAlertPkts indicates the number of MLD packets dropped on this SDP Bind because the Router Alert Option in the IP packet is not set. |
| C32 sdpBndMldSnpgRxZeroSrcAdrPkts | 1.3.6.1.4.1.6527.3.1.2.45.3.7.1.25 | Counter32 | read-only | The value of the object sdpBndMldSnpgRxZeroSrcAdrPkts indicates the number of MLD packets dropped on this SDP Bind because they contain a zero source IPv6 address. |
| C32 sdpBndMldSnpgSendQueryCfgDrops | 1.3.6.1.4.1.6527.3.1.2.45.3.7.1.26 | Counter32 | read-only | The value of the object sdpBndMldSnpgSendQueryCfgDrops indicates the number of times an MLD Query is dropped because the object sdpBndMldSnpgCfgSendQueries for this SDP Bind is set to 'inService(2)'. |
| C32 sdpBndMldSnpgImportPolicyDrops | 1.3.6.1.4.1.6527.3.1.2.45.3.7.1.27 | Counter32 | read-only | The value of the object sdpBndMldSnpgImportPolicyDrops indicates the number of times an MLD group or source is dropped because of applying an import policy on this SDP Bind. |
| C32 sdpBndMldSnpgMaxNumGroupsDrops | 1.3.6.1.4.1.6527.3.1.2.45.3.7.1.28 | Counter32 | read-only | The value of the object sdpBndMldSnpgMaxNumGroupsDrops indicates the number of times an MLD group is dropped because of exceeding the configured maximum number of groups on this SDP Bind. |
| C32 sdpBndMldSnpgRxWrongVersionPkts | 1.3.6.1.4.1.6527.3.1.2.45.3.7.1.29 | Counter32 | read-only | The value of the object sdpBndMldSnpgRxWrongVersionPkts indicates the total number of MLD packets with a wrong version received on this SDP Bind. |
| C32 sdpBndMldSnpgRxLocalScopePkts | 1.3.6.1.4.1.6527.3.1.2.45.3.7.1.30 | Counter32 | read-only | The value of the object sdpBndMldSnpgRxLocalScopePkts indicates the number of MLD packets received on the link-local scope IPv6 multicast address. |
| C32 sdpBndMldSnpgRxRsvdScopePkts | 1.3.6.1.4.1.6527.3.1.2.45.3.7.1.31 | Counter32 | read-only | The value of the object sdpBndMldSnpgRxRsvdScopePkts indicates the number of MLD packets received on the reserved scope IPv6 multicast address. |
| tmnxMldSnoopingNotificationObjs | 1.3.6.1.4.1.6527.3.1.2.45.4 | |||
| IPt tmnxMldSnpgGroupAddressType | 1.3.6.1.4.1.6527.3.1.2.45.4.1 | InetAddressType | accessible-for-notify | The value of the object tmnxMldSnpgGroupAddressType indicates the type of tmnxMldSnpgGroupAddress. |
| IP tmnxMldSnpgGroupAddress | 1.3.6.1.4.1.6527.3.1.2.45.4.2 | InetAddress | accessible-for-notify | The value of the object tmnxMldSnpgGroupAddress indicates an IP multicast group address. |
| STR tmnxMldSnpgMcsFailureReason | 1.3.6.1.4.1.6527.3.1.2.45.4.3 | DisplayString | accessible-for-notify | The value of the object tmnxMldSnpgMcsFailureReason indicates the reason why the sapMldSnpgMcsFailure notification is sent. |
| tmnxMldSnoopingNotifyPrefix | 1.3.6.1.4.1.6527.3.1.3.45 | |||
| tmnxMldSnoopingSapPrefix | 1.3.6.1.4.1.6527.3.1.3.45.1 | |||
| tmnxMldSnpgSapNotifications | 1.3.6.1.4.1.6527.3.1.3.45.1.0 | |||
| NTF sapMldSnpgGrpLimitExceeded | 1.3.6.1.4.1.6527.3.1.3.45.1.0.1 | The sapMldSnpgGrpLimitExceeded notification is generated when an MLD group is dropped on a given SAP because a user configurable upper limit, given by sapMldSnpgCfgMaxNbrGrps, is reached. | ||
| NTF sapMldSnpgMcsFailure | 1.3.6.1.4.1.6527.3.1.3.45.1.0.2 | The sapMldSnpgMcsFailure notification is generated when an MLD group on a given SAP could not be synced to the MCS (multi-chassis synchronization) database. | ||
| tmnxMldSnoopingSdpBndPrefix | 1.3.6.1.4.1.6527.3.1.3.45.2 | |||
| tmnxMldSnpgSdpBndNotifications | 1.3.6.1.4.1.6527.3.1.3.45.2.0 | |||
| NTF sdpBndMldSnpgGrpLimitExceeded | 1.3.6.1.4.1.6527.3.1.3.45.2.0.1 | The sdpBndMldSnpgGrpLimitExceeded notification is generated when an MLD group is dropped on a given SDP bind because a user configurable upper limit, given by sdpBndMldSnpgCfgMaxNbrGrps, is reached. |
RFC description
Vendor-private MIB for Alcatel-Lucent (Nokia) SR OS multicast listener discovery snooping management on carrier-grade routers.
Start monitoring Nokia/Alcatel-Lucent SROS routers delivering IPTV/multicast VPLS services (MLD snooping per-service admin status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.