SIGMA-MIB

Description: Enterprise MIB for Sigma Network Systems ECS-1 bridge/router devices, covering hardware, software, FDDI, UART, WAN, and filter management

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

SIGMA-MIB is an enterprise vendor MIB for the Sigma Network Systems ECS-1, a combined bridge/router device, covering hardware status, software configuration, and per-technology interface management across FDDI, UART/serial, and WAN interfaces along with packet filtering. It exposes hardware module identification and status, the running software version, and interface-specific configuration/status objects for each supported interface type, plus filter rule management for traffic control. Its monitoring emphasis spans both hardware and software status: hardware module state reveals a failed card or component in the ECS-1 chassis, the software version object confirms which firmware release is running, and per-interface status on FDDI, serial (UART), and WAN ports reveals link failures on any of the device's diverse interface types. As a self-contained enterprise MIB it is not noted as depending on other standard MIBs, instead defining its own object hierarchy for the ECS-1's specific hardware and protocol mix. It was deployed in legacy multiprotocol bridge/router environments using the Sigma Network Systems ECS-1 platform. Engineers can download the SIGMA-MIB file directly to load it into their MIB browser.

No sample object names were captured for this module in the available source excerpt; based on its stated scope, an admin would poll hardware module status objects to detect a failed component in the ECS-1 chassis, check the software version object to confirm the installed firmware release, and check per-interface status across FDDI, UART, and WAN objects to detect a down link on any of the device's connection types.

Sigma Network Systems ECS-1 MIB for managing bridge/router hardware, software, and administrative configuration.