| OID symbolic | OID numeric | Type | Access | Description |
|---|
| timetraAPSMIBModule | 1.3.6.1.4.1.6527.1.1.3.29 | | | This document is the SNMP MIB module to manage and provision APS
functionality for the Alcatel-Lucent SROS products. This includes
extensions to the APS MIB defined in RFC 3498.
Copyright 2004-2011 Alcatel-Lucent. All rights reserved.
Reproduction of this document is authorized on the condition that
the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Alcatel-Lucent's
proprietary intellectual property. Alcatel-Lucent retains
all title and ownership in the Specification, including any
revisions.
Alcatel-Lucent grants all interested parties a non-exclusive
license to use and distribute an unmodified copy of this
Specification in connection with management of Alcatel-Lucent
products, and without fee, provided this copyright notice and
license appear on all copies.
This Specification is supplied 'as is', and Alcatel-Lucent
makes no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification. |
| tApsMIBConformance | 1.3.6.1.4.1.6527.3.1.1.29 | | | |
| tmnxApsMIBCompliances | 1.3.6.1.4.1.6527.3.1.1.29.1 | | | |
| tApsMIBCompliance | 1.3.6.1.4.1.6527.3.1.1.29.1.1 | | | The compliance statement for revision 1.0 of TIMETRA-APS-MIB. |
| tApsMIBComplianceV4v0 | 1.3.6.1.4.1.6527.3.1.1.29.1.2 | | | The compliance statement for revision 4.0 of the Alcatel-Lucent
SROS series systems. |
| tApsMIBComplianceV7v0 | 1.3.6.1.4.1.6527.3.1.1.29.1.3 | | | The compliance statement for revision 7.0 of the Alcatel-Lucent
SROS series systems. |
| tApsMIBComplianceV8v0 | 1.3.6.1.4.1.6527.3.1.1.29.1.4 | | | The compliance statement for revision 8.0 of the Alcatel-Lucent
SROS series systems. |
| tApsMIBComplianceV9v0 | 1.3.6.1.4.1.6527.3.1.1.29.1.5 | | | The compliance statement for release 9.0 of Alcatel-Lucent SROS
series systems. |
| tmnxApsMIBGroups | 1.3.6.1.4.1.6527.3.1.1.29.2 | | | |
| tmnxApsSwitchCommand | 1.3.6.1.4.1.6527.3.1.1.29.2.1 | | | The group of objects for management of aps switch command
applicable to the aps groups implementing linear APS 1+1 architecture. |
| tmnxApsChanStatus | 1.3.6.1.4.1.6527.3.1.1.29.2.2 | | | The group of objects for management of status information applicable
to the APS channels implementing linear APS 1+1 architecture. |
| tmnxApsNotifications | 1.3.6.1.4.1.6527.3.1.1.29.2.3 | | | A collection of SONET liner APS notifications. |
| tmnxApsNotificationsV4v0 | 1.3.6.1.4.1.6527.3.1.1.29.2.4 | | | A collection of SONET liner APS notifications for revision 4.0 of the
Alcatel-Lucent SROS series systems. |
| tmnxApsMcGroup | 1.3.6.1.4.1.6527.3.1.1.29.2.5 | | | The group of objects for the configuration of a Multi-Chassis APS
group. |
| tmnxApsConfigGroup | 1.3.6.1.4.1.6527.3.1.1.29.2.6 | | | The group of objects for the configuration of APS groups added for
revision 7.0 of the Alcatel-Lucent SROS series systems. |
| tmnxApsConfigV8v0Group | 1.3.6.1.4.1.6527.3.1.1.29.2.7 | | | The group of objects for the configuration of APS groups added for
revision 8.0 of the Alcatel-Lucent SROS series systems. |
| tmnxApsGroupCommandV9v0Group | 1.3.6.1.4.1.6527.3.1.1.29.2.8 | | | The group of APS group command objects for release 9.0 of
Alcatel-Lucent SROS series systems. |
| tmnxApsNotificationsV9v0Group | 1.3.6.1.4.1.6527.3.1.1.29.2.9 | | | The group of APS notifications for release 9.0 of Alcatel-Lucent SROS
series systems. |
| tApsMIBObjs | 1.3.6.1.4.1.6527.3.1.2.29 | | | |
| tApsCommandTable | 1.3.6.1.4.1.6527.3.1.2.29.1 | | not-accessible | This table augments the apsCommandTable of the APS-MIB |
| tApsCommandEntry | 1.3.6.1.4.1.6527.3.1.2.29.1.1 | | not-accessible | A conceptual row in the tApsCommandTable. This row exists only
if the associated apsConfigEntry is active. |
| INT tApsExerciseCommandResult | 1.3.6.1.4.1.6527.3.1.2.29.1.1.1 | INTEGER | read-only | Stores the result of the last exercise command on the
APS group and channel specified by the index values.
When read this object returns 4(unknown) if no exercise command
has been written to this channel since initialization. |
| tApsChanStatusTable | 1.3.6.1.4.1.6527.3.1.2.29.2 | | not-accessible | This table augments the apsChanConfigTable of the APS-MIB. It contains
status information in addition to those mentioned in apsChanStatusTable
of the APS MIB. |
| tApsChanStatusEntry | 1.3.6.1.4.1.6527.3.1.2.29.2.1 | | not-accessible | A conceptual row in the tApsChanStatusTable. This row exists only
if the associated apsChanConfigEntry exists. |
| INT tApsChanTxLaisState | 1.3.6.1.4.1.6527.3.1.2.29.2.1.1 | INTEGER | read-only | The current state of the 7x50 APS forced Tx-LAIS on the specified
APS channel.
Note that the 7x50 products always receive and transmit on the same
(active) APS channel. For a Multi-Chassis (MC) APS or a unidirectional
APS group, the 7x50 product may transmit (Tx) L-AIS on the inactive
APS channel to force the remote end to receive traffic on the 7x50
selected active APS channel.
The state clear indicates that the 7x50 product currently doesn't
transmit any forced LAIS on the APS channel. The state momentary
indicates that the 7x50 product has transmitted forced LAIS on the APS
channel for a moment(e.g. 100 msec). The state persistent indicates
that the 7x50 product has been persistently transmitting forced LAIS on
the APS channel. |
| tApsMcConfigTable | 1.3.6.1.4.1.6527.3.1.2.29.3 | | not-accessible | This table augments the apsConfigTable of the APS-MIB. |
| tApsMcConfigEntry | 1.3.6.1.4.1.6527.3.1.2.29.3.1 | | not-accessible | A conceptual row in the tApsMcConfigTable. This row exists only
if the associated apsConfigEntry is active. |
| IPt tApsMcNeighborAddrType | 1.3.6.1.4.1.6527.3.1.2.29.3.1.1 | InetAddressType | read-write | The value of object tApsMcNeighborAddrType specifies the address type
of the neighbor's ip-address as specified by tApsMcNeighborAddr in
the case of Multi-Chassis APS architecture. |
| IP tApsMcNeighborAddr | 1.3.6.1.4.1.6527.3.1.2.29.3.1.2 | InetAddress | read-write | The value of tApsMcNeighborAddr variable specifies the neighbor's
ip-address only on a Multi-Chassis APS where the working and protect
circuits are configured on different routers. The value of
tApsMcNeighborAddr set to 0.0.0.0, implies that this APS group
is configured as a Single-Chassis APS group.
The route to the neighbor must not traverse the MC-APS member
(working or protect) circuits. It is recommended that the address
configured here is on a shared network between the routers that own
the working and protect circuits. By default no neighbor address
is configured and both the working and protect circuits are to be
configured on the same router (i.e. Single-Chassis APS). |
| U32 tApsMcAdvertiseInterval | 1.3.6.1.4.1.6527.3.1.2.29.3.1.3 | Unsigned32 | read-write | The value of tApsMcAdvertiseInterval specifies the time interval,
in 100s of milliseconds, between 'I am operational' messages sent by
both protect and working circuits to their neighbor for Multi-Chassis
APS. The value of tApsMcAdvertiseInterval is valid only for a
Multi-Chassis APS as indicated by the value of tApsMcNeighborAddr not
set to 0.0.0.0. |
| U32 tApsMcHoldTime | 1.3.6.1.4.1.6527.3.1.2.29.3.1.4 | Unsigned32 | read-write | The value of tApsMcHoldTime specifies how much time can pass, in 100s
of milliseconds, without receiving an advertise packet from the
neighbor before the Multi-Chassis signaling link is considered not
operational. It is usually 3 times the value of
tApsMcAdvertiseInterval. The value of tApsMcAdvertiseInterval is valid
only for a Multi-Chassis APS as indicated by the value of
tApsMcNeighborAddr not set to 0.0.0.0. |
| tApsMcStatusTable | 1.3.6.1.4.1.6527.3.1.2.29.4 | | not-accessible | tApsMcStatusTable augments the apsConfigTable of the APS-MIB. It
contains status information in addition to those mentioned in
apsStatusTable of the APS MIB. |
| tApsMcStatusEntry | 1.3.6.1.4.1.6527.3.1.2.29.4.1 | | not-accessible | A conceptual row in the tApsMcStatusTable. This row exists only
if the associated apsConfigEntry exists. |
| INT tApsMcApsCtlLinkState | 1.3.6.1.4.1.6527.3.1.2.29.4.1.1 | INTEGER | read-only | The value of tApsMcApsCtlLinkState indicates the current state of
the 7x50 Multi-Chassis (MC) APS Group Control Link.
Note that for a Single-Chassis APS group the state is always up.
The state 'up' indicates that the 7x50 MC-APS controller has received a
valid control message from its neighboring router within the last
tApsMcHoldTime interval, and the MC-APS control link is considered as
operational.
The state 'dnSignalingFailure' indicates that the 7x50 MC-APS
controller hasn't received any control message from its neighboring
router or vice-versa within the last tApsMcHoldTime interval.The MC-APS
control link is considered as operationally down.
The state 'dnIncompatibleNbr' indicates that the 7x50 MC-APS controller
has received a control message from a neighboring router within the
last tApsMcHoldTime interval, but the member circuit type
(i.e. working/protection) of the neighboring router is not compatible
with that of the local router. The MC-APS control link is considered as
operationally down. |
| tApsConfigTable | 1.3.6.1.4.1.6527.3.1.2.29.5 | | not-accessible | tApsConfigTable augments the apsConfigTable of the APS-MIB. It
contains configuration information in addition to those mentioned in
apsConfigTable of the APS MIB. |
| tApsConfigEntry | 1.3.6.1.4.1.6527.3.1.2.29.5.1 | | not-accessible | A conceptual row in the tApsConfigTable. This row exists only
if the associated apsConfigEntry exists. |
| INT tApsProtectionType | 1.3.6.1.4.1.6527.3.1.2.29.5.1.1 | INTEGER | read-write | The value of tApsProtectionType specifies the protection type of the
APS group.
The valid options are:
onePlusOneSignalling (1) -- Signalling is 1+1, data is 1:1.
onePlusOne (2) -- Both signalling and data is 1+1. |
| U32 tApsLineSFHoldTime | 1.3.6.1.4.1.6527.3.1.2.29.5.1.2 | Unsigned32 | read-write | The value of tApsLineSFHoldTime specifies the time, in 100s of
milliseconds, that the APS group will remain operational up before
reporting a Line Signal Failure due to lais or b2err-sf. |
| U32 tApsLineSDHoldTime | 1.3.6.1.4.1.6527.3.1.2.29.5.1.3 | Unsigned32 | read-write | The value of tApsLineSDHoldTime specifies the time, in 100s of
milliseconds, that the APS group will remain operational up before
reporting a Line Signal Degredation due to b2err-sd. |
| INT tApsRdiAlarmGeneration | 1.3.6.1.4.1.6527.3.1.2.29.5.1.4 | INTEGER | read-write | The value of tApsRdiAlarmGeneration specifies the method used to
generate RDI alarms on all levels (line, path) for the APS physical
protecting/working ports referenced by apsChanConfigIfIndex.
The modification of the tApsRdiAlarmGeneration value is limited to an
APS port with no protecting/working ports, otherwise an INCONSISTENT
VALUE error is returned.
The available enumerations for tApsRdiAlarmGeneration are:
- suppress - RDI alarms are not generated on any level.
- circuit - RDI alarms are H/W generated independently on
each working and protect circuit on RX failure of
that circuit. |
| tApsGroupCommandTable | 1.3.6.1.4.1.6527.3.1.2.29.6 | | not-accessible | tApsGroupCommandTable augments APS-MIB::apsConfigTable. It contains
command information in addition to the configuration information
in APS-MIB::apsConfigTable. |
| tApsGroupCommandEntry | 1.3.6.1.4.1.6527.3.1.2.29.6.1 | | not-accessible | A conceptual row in tApsGroupCommandTable. This row exists only
if the associated apsConfigEntry exists. |
| INT tApsAnnexBCommandSwitch | 1.3.6.1.4.1.6527.3.1.2.29.6.1.1 | INTEGER | read-write | The value of tApsAnnexBCommandSwitch specifies the Annex B supported
APS switch command applied to the APS group.
The supported values:
'noCmd(1)' -- no command was applied to the group since system
-- initialization.
'lockout(2)' -- lockout the APS group.
'clearLockout(3)' -- clear the lockout.
Sets to value 'lockout(2)' or 'clearLockout(3)' will be rejected with
error inconsistentValue if APS-MIB::apsConfigMode is not equal to
'onePlusOneOptimized(4)'. If 'noCmd(1)' is used in a write operation
a wrongValue error is returned.
When read this object returns the last command written or 'noCmd(1)'. |
| tApsNotificationsPrefix | 1.3.6.1.4.1.6527.3.1.3.29 | | | |
| tApsNotifications | 1.3.6.1.4.1.6527.3.1.3.29.0 | | | |
| NTF tApsModeMismatchClear | 1.3.6.1.4.1.6527.3.1.3.29.0.1 | | | The tApsModeMismatchClear notification is generated when
a mode mismatch condition, indicated by the 'modeMismatch(0)'
bit of APS-MIB::apsStatusCurrent, is cleared. |
| NTF tApsChannelMismatchClear | 1.3.6.1.4.1.6527.3.1.3.29.0.2 | | | The tApsChannelMismatchClear notification is generated when
a channel mismatch condition, indicated by the 'channelMismatch(1)'
bit of APS-MIB::apsStatusCurrent, is cleared. |
| NTF tApsPSBFClear | 1.3.6.1.4.1.6527.3.1.3.29.0.3 | | | The tApsPSBFClear notification is generated when a PSBF
(Protection Switch Byte Failure) condition, indicated by the
'psbf(2)' bit of APS-MIB::apsStatusCurrent, is cleared. |
| NTF tApsFEPLFClear | 1.3.6.1.4.1.6527.3.1.3.29.0.4 | | | The tApsFEPLFClear notification is generated when a FEPLF
(Far-End Protection-Line Failure) condition, indicated by the
'feplf(3)' bit of APS-MIB::apsStatusCurrent, is cleared. |
| NTF tApsLocalSwitchCommandSet | 1.3.6.1.4.1.6527.3.1.3.29.0.5 | | | The tApsLocalSwitchCommandSet is generated when any of the following
APS switch commands are set on APS-MIB::apsCommandSwitch in the local
node. The switch commands are 'lockoutOfProtection',
'forcedSwitchWorkToProtect', 'forcedSwitchProtectToWork',
'manualSwitchWorkToProtect', 'manualSwitchProtectToWork'. |
| NTF tApsLocalSwitchCommandClear | 1.3.6.1.4.1.6527.3.1.3.29.0.6 | | | The tApsLocalSwitchCommandClear notification is generated when an APS
switch command in the local node gets cleared. Note that a switch
command in the local node can be cleared either due to set of the
'clear' switch command on APS-MIB::apsCommandSwitch in the local node,
or due to presence of a higher priority condition in the local or
remote node. |
| NTF tApsRemoteSwitchCommandSet | 1.3.6.1.4.1.6527.3.1.3.29.0.7 | | | The tApsRemoteSwitchCommandSet is generated when the received K1
byte (APS-MIB::apsStatusK1K2Rcv) from a peer indicates that an
APS switch command just got set on APS-MIB::apsCommandSwitch in the
remote (peer) node. |
| NTF tApsRemoteSwitchCommandClear | 1.3.6.1.4.1.6527.3.1.3.29.0.8 | | | The tApsRemoteSwitchCommandClear is generated when the received K1
byte (APS-MIB::apsStatusK1K2Rcv) from a peer indicates that an
APS switch command just got cleared on an APS channel in the
remote (peer) node. |
| NTF tApsMcApsCtlLinkStateChange | 1.3.6.1.4.1.6527.3.1.3.29.0.9 | | | tApsMcApsCtlLinkStateChange notification is generated when
there is a change in the value of tApsMcApsCtlLinkState. |
| NTF tApsChanTxLaisStateChange | 1.3.6.1.4.1.6527.3.1.3.29.0.10 | | | tApsChanTxLaisStateChange notification is generated when there is
a change in the value of tApsChanTxLaisState. |
| NTF tApsPrimaryChannelChange | 1.3.6.1.4.1.6527.3.1.3.29.0.11 | | | tApsPrimaryChannelChange notification is generated when there is a
switch of the primary APS channel. Object apsStatusK1K2Trans
indicates the new primary APS channel. |
