All MIBs › TIMETRA-APS-MIB › tApsAnnexBCommandSwitch
tApsAnnexBCommandSwitch
Module: TIMETRA-APS-MIB
OID (symbolic): TIMETRA-APS-MIB::tApsAnnexBCommandSwitch
OID (numeric): 1.3.6.1.4.1.6527.3.1.2.29.6.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The value of tApsAnnexBCommandSwitch specifies the Annex B supported APS switch command applied to the APS group.
The supported values:
'noCmd(1)' -- no command was applied to the group since system -- initialization. 'lockout(2)' -- lockout the APS group. 'clearLockout(3)' -- clear the lockout.
Sets to value 'lockout(2)' or 'clearLockout(3)' will be rejected with error inconsistentValue if APS-MIB::apsConfigMode is not equal to 'onePlusOneOptimized(4)'. If 'noCmd(1)' is used in a write operation a wrongValue error is returned.
When read this object returns the last command written or 'noCmd(1)'.
What is tApsAnnexBCommandSwitch?
This value applies an Annex B APS protection switch command to the group: noCmd(1), meaning no command has been applied since system initialization, lockout(2), locking out protection switching, or clearLockout(3), removing a lockout; lockout and clearLockout are rejected with an inconsistentValue error unless the group's apsConfigMode is onePlusOneOptimized(4), and writing noCmd(1) itself returns a wrongValue error. An admin sets this to lockout(2) to prevent protection switching during planned maintenance on the working circuit, then clearLockout(3) once maintenance is complete. Setting tApsAnnexBCommandSwitch to lockout(2) on a group not configured for onePlusOneOptimized mode will be rejected with an inconsistentValue error rather than silently taking effect.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.29.6.1.1 snmpwalk -v2c -c public <target> TIMETRA-APS-MIB::tApsAnnexBCommandSwitch
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.29.6.1.1.1 snmpget -v2c -c public <target> TIMETRA-APS-MIB::tApsAnnexBCommandSwitch.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6527.3.1.2.29.6.1.1.1 i <value>
Start monitoring Nokia/Alcatel-Lucent 7750 SR (SROS) router with SONET/SDH interfaces (APS protection-channel/failover status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TIMETRA-APS-MIB::tApsAnnexBCommandSwitch OID value, configure state conditions and alerts, and monitor any Nokia/Alcatel-Lucent 7750 SR (SROS) router with SONET/SDH interfaces (APS protection-channel/failover status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6527 | timetra | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| 1.3.6.1.4.1.6527.3 | timetraProducts | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| 1.3.6.1.4.1.6527.3.1 | tmnxSRMIB | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| 1.3.6.1.4.1.6527.3.1.2 | tmnxSRObjs | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6527.3.1.2.29 | tApsMIBObjs | TIMETRA-APS-MIB |
| 1.3.6.1.4.1.6527.3.1.2.29.6 | tApsGroupCommandTable | TIMETRA-APS-MIB |
| 1.3.6.1.4.1.6527.3.1.2.29.6.1 | tApsGroupCommandEntry | TIMETRA-APS-MIB |
| 1.3.6.1.4.1.6527.3.1.2.29.6.1.1 | tApsAnnexBCommandSwitch | TIMETRA-APS-MIB |