All MIBs › LaserJet-Series4000-MIB › auto_continue
auto_continue
Module: LaserJet-Series4000-MIB
OID (symbolic): LaserJet-Series4000-MIB::auto_continue
OID (numeric): 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Indicates if the device will automatically continue after encountering a continuable error. If AUTO- CONTINUE is set to eOn, the device will automatically generate continue event to acknowledge continuable errors. If AUTO-CONTINUE is set to eOff, then some other continue event will have to acknowledge the continuable error. Additional information: If this is set to eOn the device displays an error message and goes offline for ten seconds. After ten seconds the printer automatically returns to the online state. If this is set to eOff then the device displays an error message and goes offline. It remains offline until the operator presses the GO key or until the CONTINUE object is set. If the printer is not idle, the new value may not take effect until a job boundary is reached. If a get is done on this object before the job boundary is reached, the value last set will be returned.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.7 snmpwalk -v2c -c public <target> LaserJet-Series4000-MIB::auto_continue
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.7.1 snmpget -v2c -c public <target> LaserJet-Series4000-MIB::auto_continue.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.7.1 i <value>
Start monitoring HP LaserJet Series 4000 printer (JetDirect-connected) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LaserJet-Series4000-MIB::auto_continue OID value, configure state conditions and alerts, and monitor any HP LaserJet Series 4000 printer (JetDirect-connected) from a single console.
OID Breakdown
Upper-level ancestors (15 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9 | net_peripheral | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4 | netdm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2 | dm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1 | device | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1 | system | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2 | status_system | CLJ8500-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.7 | auto_continue | LaserJet-Series4000-MIB |