LaserJet5Si-MIB

All MIBs › LaserJet5Si-MIB

Description: LaserJet5Si-MIB module

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is LaserJet5Si-MIB?

LaserJet5Si-MIB is a Hewlett-Packard printer-specific enterprise MIB module for the HP LaserJet 5Si laser printer, part of HP's proprietary printer management MIB family (predating/complementing the standard Printer-MIB). It exposes printer power/energy-management configuration (Energy Star compliance, sleep mode), job-handling behavior (continue/auto-continue on error, job input auto-continue timeout and mode), error/status logging (background status message lines, error log clear), and basic device identity data (model number). As a monitoring resource it is centrally about tracking the printer's software/operational status - job error handling and auto-continue behavior, current background status messages that reflect device state (e.g., paper jam, low toner surfaced via status lines), and power-saving/sleep-mode state - rather than deep hardware sensor telemetry. It is a vendor-specific predecessor/complement to the standard Printer-MIB (RFC 1759) and Host Resources MIB conventions used more broadly for printer management. It is deployed on HP LaserJet 5Si printers in office/enterprise environments, where LaserJet5Si-MIB SNMP monitoring lets network management systems track print job status and configure power/error-handling behavior.

IPNetwork Monitor allows you to monitor SNMP objects defined in LaserJet5Si-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP LaserJet 5Si laser printer

Monitoring Examples

An administrator would poll background-status-msg-line1-part1 and background-status-msg-line2-part1 to read the printer's current status message (e.g., a paper jam or "out of toner" condition surfacing as human-readable text), and check on-off-line to confirm whether the printer is currently online and accepting jobs. Reviewing job-input-auto-continue-mode and job-input-auto-continue-timeout reveals how the printer behaves on input errors - whether it auto-recovers after a timeout or waits for operator intervention - while sleep-mode and energy-star settings show the device's current power-management configuration.

What Can Be Monitored

background status message (fault/status text)
online/offline state
job auto-continue mode and timeout
sleep mode / Energy Star power state
error log

Imported Objects

From RFC1155-SMI

enterprises

From SNMPv2-TC

TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT _pysmi_continue	1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.6	INTEGER	write-only	A device can support a class of errors called continuable errors. When a continuable error is encountered, the device requires a continue event to occur before the device will continue operation. One continue event is setting the CONTINUE object to eInitiateAction. Devices can support other continue events, like auto-continue. A continue event causes the continuable error to be acknowledged, thus allowing the device to continue. Each device needs to list the continuable errors. If the device doesn't currently have an unacknowledged continuable error, the response will contain . Additional information: If LaserJet 5Si doesn't currently have an unacknowledged continuable error, the response will contain status. Since LaserJet 5Sidoes not have a CONTINUE key, the SELECT key is used to perform the continue operation at the control panel.
active_print_jobs	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.2
STR asset_number	1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.12	DisplayString	read-write	User defined asset number. The POS should indicate the maximum supported string length. If the user entered string is too long, the device will store as much as possible and will return the . Additional information: The maximum supported string length is 8 characters. If the user entered string is too long, the device will store the first 8 characters and will return the status. This object is saved in NVRAM.
INT auto_continue	1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.7	INTEGER	read-write	Indicates if the device will automatically continue after encountering a continuable error. If AUTO- CONTINUE is set to eOn, the device will automatically generate continue event to acknowledge continuable errors. If AUTO-CONTINUE is set to eOff, then some other continue event will have to acknowledge the continuable error.
background_message	1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.37
background_message1	1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.37.1
background_message2	1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.37.2
STR background_status_msg_line1_part1	1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.37.1.1	DisplayString	read-write	The string displayed on the device's front panel in place of the printer's built-in background status string. An example built-in background status string is '00 READY'. Additional information: This object allows a message to be displayed when it is the highest priority message. Setting this objedct does not guarantee the message will be displayed; and reading it returns the value last written, not the currently displayed message (use prtConsoleDisplayBufferText to read the display). The priority assigned for displaying this message is one lower than the PJL RDYMSG. To clear the message, write a null string to this object. While the object prtConsoleLocalization controls the localization and symbol set usage of printer generated messages, this object's message is displayed using the symbol set specified with the string. The default symbol set is Roman-8; additional legal symbol sets are ISOLatin5, ISOLatin2 and Windows31J. When either BACKGROUND-STATUS-MSG-LINE1-PART1 or BACKGROUND-STATUS-MSG-LINE2-PART1 contains a non-null value, both will be displayed.
STR background_status_msg_line2_part1	1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.37.2.1	DisplayString	read-write	The string displayed on the device's front panel in place of the printer's built-in background status string. An example built-in background status string is '00 READY'. Additional information: See BACKGROUND-STATUS-MSG-LINE1-PART1
INT cancel_job	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.2	INTEGER	write-only	Cancels the print job whose ID matches the value written to the CANCEL-JOB object. The host first learns the job ID using the CURRENT-JOB-PARSING-ID command. If the printer has completely processed the job, the printer responds with . If the value of the CURRENT-JOB-PARSING-ID is smaller than the value written to the CANCEL-JOB object, then the printer responds with . When read, returns the value of the last job ID what was canceled, or -1 to indicate no job has been canceled. Additional information: If the value written matches the ID of a job that is currently being canceled (for any reason), the printer responds with . LaserJet 5Si uses job ID's in the range of 0..32767. Because the ID number can wrap to zero, CURRENT-JOB-PARSING-ID may be smaller than the value written to this object; when this occurs, no error will result as long as the ID is for a currently processing job.
INT channel_bytes_received	1.3.6.1.4.1.11.2.3.9.4.2.1.7.2.1.3	INTEGER	read-only	The low order 31 bits of the number of bytes received by the printer from the host on this logical channel.
INT channel_bytes_sent	1.3.6.1.4.1.11.2.3.9.4.2.1.7.2.1.2	INTEGER	read-only	The low order 31 bits of the number of bytes sent from the printer to the host on this logical channel.
channel_entry	1.3.6.1.4.1.11.2.3.9.4.2.1.7.2.1
INT channel_io_errors	1.3.6.1.4.1.11.2.3.9.4.2.1.7.2.1.4	INTEGER	read-only	The low order 31 bits of the number of I/O errors which have occured on this logical channel.
INT channel_jobs_received	1.3.6.1.4.1.11.2.3.9.4.2.1.7.2.1.5	INTEGER	read-only	The low order 31 bits of the number of print jobs which have been received on this logical channel.
INT channel_mio	1.3.6.1.4.1.11.2.3.9.4.2.1.7.2.1.6	INTEGER	read-only	The number of the MIO card associated with this logical channel. If this logical channel is not associated with an MIO card a zero is returned. The value 1 is returned if this logical channel is associated with an MIO card in slot 1. The value 2 is returned if this logical channel is associated with an MIO card in slot 2. Additional information: The value returned will be zero for channel one. If an MIOA card is installed, channels 2..8 will return a value of one or two and, if an MIOB card is installed, 9-15 will return a value of one or two, but not the same as channels 2..8. When two MIO cards are installed, the value returned by any channel 2-15 may change after the printer is power cycled.
channel_table	1.3.6.1.4.1.11.2.3.9.4.2.1.7.2
INT cold_reset_media_size	1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.19	INTEGER	read-write	Returns or sets the media size that is used as the DEFAULT-MEDIA-SIZE when a cold reset occurs.
INT current_job_parsing_id	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.2.1.1	INTEGER	read-only	Contains the printer assigned job identification for the job currently being processed by the processing PDL sub- system. The job ID is a monotonically increasing number. The job ID may be reset to zero at power-up and may roll over to zero after reaching some maximum value. Additional information: A value of -1 is returned when the printer is not parsing a job. When data for a new job is detected, this object is updated (the job may or may not turn out to be a Null Job); however, the trap does not occur until the printer determines that it is not a Null Job (a trapped value will differ from the previous value by one or more). Some JOB-INFO- objects are created when the first data bytes are received. If the printer determines that the job is a Null Job, the JOB-INFO- objects related to the Null Job are deleted. LaserJet 5Si retains the JOB-INFO- objects for the 32 most recent jobs that are not Null Jobs. LaserJet 5Si resets the job ID to zero at power-up and will increment it to 32767 before rolling it to zero. To distinguish whether a power cycle or a rollover caused an id of zero, the object prtGeneralConfigChanges can be watched and if it increments at the same time as CURRENT-JOB-PARSING-ID goes to zero, then a power cycle is the most likely cause.
INT default_copies	1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.4	INTEGER	read-write	Returns or changes default copies. Default copies is the default values used by the PDL to control the number of copies of each page in the print job that are printed. The print job can override this value. The list of supported values should be documented in the device POS. Additional information: The supported values are 1 through 999. Setting to an unsupported value causes the printer to substitute in a snap value and to return status. The snap values are as follow: 999 snaps to 999
INT default_horizontal_black_resolution	1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.9	INTEGER	read-write	Returns or changes the value of the default horizontal black resolution. The units are dots per inch. Additional information: In LaserJet 5Si changing this OID also causes DEFAULT- VERTICAL-BLACK RESOLUTION to change. DEFAULT- HORIZONTAL-BLACK-RESOLUTION and DEFAULT-VERTICAL-BLACK-RESOLUTION must always be the same. The supported values are 300 and 600. Setting to an unsupported value causes the printer to substitute in a snap value and to return status. The snap values are as follow: =450 snap to 600
INT default_lines_per_page	1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.11	INTEGER	read-write	Returns or changes the default number of lines per page. The POS indicates the supported values. An unsupported value causes the printer to use the closest supported value, causing the printer to return the . Additional information: The supported values in LaserJet 5Si are 5 to 128. Setting to an unsupported value causes the the printer to substitute in a snap value and to return status. The snap values are as follow: 128 snaps to 128
STR default_media_name	1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.22	DisplayString	read-write	Returns or sets the media name that is used until the media name is changed by a print job command. Additional information: This string must be one of the MEDIAn-NAME objects.
INT default_media_size	1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.13	INTEGER	read-write	This indicates the default media size. A write of an unsupported value cases an . Complete list of supported media sizes along with their dimensions are listed in the ''Media Size Table'' near the end of this document.
INT default_page_protect	1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.10	INTEGER	read-write	Returns or changes the default page protection behavior. If eOff, the device does not reserve memory for holding the entire raster form of a processed page. If eOn, then memory is reserved. If eAuto, the device determines the amount of memory to reserve. Additional information: Setting to eOn causes MET to be more conservative, but it will not allocate memory to hold an entire rasterized page.
INT default_print_quality	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.6.7	INTEGER	read-write	Returns or sets the default print quality. A value of zero has the lowest print quality. A value of 100 has the highest print quality. Each POS should document what values in the 0 to 100 range are supported. Additional information: In LaserJet 5Si, the supported values are 0 and 100. A value of zero corresponds to ECONOMODE=ON, minimizing the toner used. A value of 100 corresponds to ECONOMODE=OFF. Setting to an unsupported value outside of the 0 to 100 range causes the printer to return status. Setting to an unsupported value inside of the 0 to 100 range causes the printer to substitute in a snap value (listed below) and to return status. The snap values are as follow: 0 to 50 snap to 0 51 to 100 snap to 100
INT default_ret	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.6.5	INTEGER	read-write	Returns or changes the Resolution Enhancement Technology setting. Devices that only support eOff and on should map all other values to on and always return the same non-eOff value to indicate on. The list of supported values should be documented in the device POS. Additional information: Setting this object to eLight or eDark will cause the object to be set to eMedium and a status of will be returned.
INT default_vertical_black_resolution	1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.8	INTEGER	read-write	Returns or changes the value of the default vertical black resolution. The units are dots per inch. Additional information: In LaserJet 5Si changing this OID also causes DEFAULT-HORIZONTAL-BLACK RESOLUTION to change. DEFAULT-HORIZONTAL-BLACK-RESOLUTION and DEFAULT-VERTICAL-BLACK-RESOLUTION must always be the same. The supported values are 300 and 600. Setting to an unsupported value causes the printer to substitute in a snap value and to return status. The snap values are as follow: =450 snap to 600
INT default_vmi	1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.12	INTEGER	read-write	Returns or changes the default vertical motion index. The unit of measure for VMI is centipoints per line. The POS indicates the supported values. An unsupported value causes the printer to use the closest supported value, causing the printer to return .
destination_subsystem	1.3.6.1.4.1.11.2.3.9.4.2.1.4
device	1.3.6.1.4.1.11.2.3.9.4.2.1
STR device_location	1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.11	DisplayString	read-write	User defined device location. The POS should indicate the maximum supported string length. If the user entered string is too long, the device will store as much as possible and will return the . Additional information: The maximum supported string length is 16 characters. If the user entered string is too long, the device will store the first 16 characters and will return the status. This object is saved in NVRAM.
STR device_name	1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.10	DisplayString	read-write	User defined device name. The POS should indicate the maximum supported string length. If the user entered string is too long, the device will store as much as possible and will return the . Additional information: This object is stored in NVRAM. The maximum supported string length is 32 characters. If the user entered string is too long, the device will store the first 32 characters and will return the status.
OCT disk_storage_block_driver2_test_return_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.15.3.2.1.1	OCTET STRING	write-only	This test object will not be supported in any released product. Setting this object allows the next call to the mass storage block driver 2 to return the specified code. The POS will specify the binary format. Additional information: The hrDeviceIndex value for the mass storage device is the same value that is used to index into the DISK-STORAGE-BLOCK-DRIVERS sub-tree. Since this product only supports one mass storage device, the hrDeviceIndex for the mass storage device will be 2 if the mass storage device is installed. The value is a two byte value. The value of the first byte indicates the return code, as described in the following table: value \| meaning ------+------------------ 1 \| After the next power cycle, indicate the \| mass storage device is not installed. Only affects the \| printer state after the next power cycle. 2 \| After the next power cycle, indicate the \| mass storage device is not initialized. Changes the \| contents of the mass storage device so the mass storage device becomes \| uninitialized. 3 \| After the next power cycle, indicate the \| mass storage device is defective. Only affects the \| printer state after the next power cycle. 4 \| Cause the specified call to the read block \| routine to indicate read failure. 5 \| Cause the specified call to the write block \| routine to indicate write failure. 6 \| After the next power cycle, indicate the \| mass storage device failed the power-on self-test, but \| completed the initialization sequence \| successfully. Only affects the \| printer state after the next power cycle. 7 \| Cause the driver to behave, after the next power \| cycle, as if the mass storage device had the serial number \| 'SN00000000'. This is a one-shot effect and the \| driver reverts to normal behavior if the printer \| is power cycled a second time. The second byte indicates on which call to the specified block driver the failure will start to occur. If the value of the first bytes is four or five, then the value of the second byte in indicates which call to the specified block driver routine will fail. A value of one means the first call will fail. A value of two means the second call will fail, and so on. If the value of the first byte is one, two, three, six, or seven, then the value of the second byte is ignored. Writing this object causes any previous write to this object to be invalidated.
dm	1.3.6.1.4.1.11.2.3.9.4.2
INT duplex_page_count	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.22	INTEGER	read-only	Total number of sheets of media that have been duplex printed. A sheet is counted if it travels through the duplex page path, regardless of whether or not marks are made on the page. The POS will indicate if the value is kept in NVRAM. Additional information: In LaserJet 5Si the count is kept in NVRAM however the NVRAM value is only updated every 10 sheets. NOTE: The value returned by this OID will be incremented every sheet but if power is lost between NVRAM updates up to 9 sheets of the count may be lost. The counter will be reset to zero after 16,777,215 (2^24-1) pages.
INT energy_star	1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.1	INTEGER	read-write	Returns or changes the Energy Star sleep value. If the value is greater than zero, then the device will go into energy saving sleep mode after the print engine has been idle for the number of seconds specified by this object. A value of zero means Energy Star is disabled and the device will not go to sleep based on print engine idle time. The value must be non-negative. Additional information: Returns or changes the Energy Star sleep value. The device will go into energy saving sleep mode after the print engine has been idle for the number of seconds specified by this object. LaserJet 5Sisupports values of 0, 900, 1800, 3600, 7200, and 10800; additionally, a value of 10 is supported in Service Mode (Control Panel or PJL instigated). A value of 0 means never go to sleep based on print engine idle time. Setting to an unsupported value causes the printer to substitute a value (listed below) and to return status. The values for normal operation are as follow: = 1 and = 1350 and = 2700 and = 5400 and = 9000 snap to 10800 (180 minutes) The values for Service Mode operation are the same as above except 10 is a legal value (no snapping). When the printer exits Service Mode the default value is restored.
INT error_log_clear	1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.38	INTEGER	write-only	Setting this object clears all the entries in the error log sub-tree.
error1	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.1
INT error1_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.1.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: Contains a device specific error code. A value of zero means 'no error'. The error number is returned in the upper 16 bits. If it is 68,69,79, or 80, then the sub code is returned in the lower 16 bits (eg. 68 0019, where the subcode is already a hexadecimal value). If the error number is any other number, then the 1st sub code (XX) will be in bits 15-8 and the 2nd sub code (YY) will be in bits 7-0 (eg. 55.04.02) where XX=04 and YY=02). Example: If the error is 68 001A, then the value returned will be 4456474. To break it down: 4456474 = 0x0044001A The upper 16 bits: 0x0044 = 68 The lower 16 bits: 0x001A = 001A Which is the error: 68 001A Example: If the error is 55.04.241, then the error code will be 3605745. To break it down: 3605745 = 0x003704F1 The upper 16 bits: 0x0037 = 55 The upper byte of the lower 16 bits: 0x04 = 04 The lower byte of the lower 16 bits: 0xF1 = 241 Which is the error: 55.04.241 ERROR1- is the oldest error in the log. Errors are added until ERROR50- is reached. If more errors occur, ERROR1- is replaced by moving all error entries down one position and adding the newest error as ERROR50-
INT error1_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.1.1	INTEGER	read-only	Contains a time stamp indicating when error 1 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: In LaserJet 5Si this item contains the engine page count when the error occurred. A value of zero means 'no error'. See ERROR1-CODE for an explanation of the order used for storing errors.
error10	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.10
INT error10_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.10.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error10_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.10.1	INTEGER	read-only	Contains a time stamp indicating when error 10 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error11	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.11
INT error11_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.11.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error11_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.11.1	INTEGER	read-only	Contains a time stamp indicating when error 11 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error12	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.12
INT error12_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.12.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error12_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.12.1	INTEGER	read-only	Contains a time stamp indicating when error 12 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error13	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.13
INT error13_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.13.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error13_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.13.1	INTEGER	read-only	Contains a time stamp indicating when error 13 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error14	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.14
INT error14_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.14.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error14_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.14.1	INTEGER	read-only	Contains a time stamp indicating when error 14 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error15	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.15
INT error15_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.15.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error15_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.15.1	INTEGER	read-only	Contains a time stamp indicating when error 15 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error16	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.16
INT error16_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.16.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error16_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.16.1	INTEGER	read-only	Contains a time stamp indicating when error 16 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error17	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.17
INT error17_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.17.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error17_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.17.1	INTEGER	read-only	Contains a time stamp indicating when error 17 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error18	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.18
INT error18_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.18.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error18_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.18.1	INTEGER	read-only	Contains a time stamp indicating when error 18 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error19	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.19
INT error19_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.19.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error19_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.19.1	INTEGER	read-only	Contains a time stamp indicating when error 19 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error2	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.2
INT error2_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.2.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error2_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.2.1	INTEGER	read-only	Contains a time stamp indicating when error 2 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error20	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.20
INT error20_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.20.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error20_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.20.1	INTEGER	read-only	Contains a time stamp indicating when error 20 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error21	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.21
INT error21_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.21.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error21_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.21.1	INTEGER	read-only	Contains a time stamp indicating when error 21 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error22	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.22
INT error22_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.22.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error22_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.22.1	INTEGER	read-only	Contains a time stamp indicating when error 22 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error23	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.23
INT error23_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.23.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error23_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.23.1	INTEGER	read-only	Contains a time stamp indicating when error 23 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error24	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.24
INT error24_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.24.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error24_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.24.1	INTEGER	read-only	Contains a time stamp indicating when error 24 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error25	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.25
INT error25_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.25.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error25_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.25.1	INTEGER	read-only	Contains a time stamp indicating when error 25 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error26	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.26
INT error26_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.26.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error26_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.26.1	INTEGER	read-only	Contains a time stamp indicating when error 26 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error27	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.27
INT error27_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.27.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error27_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.27.1	INTEGER	read-only	Contains a time stamp indicating when error 27 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error28	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.28
INT error28_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.28.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error28_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.28.1	INTEGER	read-only	Contains a time stamp indicating when error 28 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error29	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.29
INT error29_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.29.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error29_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.29.1	INTEGER	read-only	Contains a time stamp indicating when error 29 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error3	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.3
INT error3_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.3.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error3_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.3.1	INTEGER	read-only	Contains a time stamp indicating when error 3 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error30	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.30
INT error30_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.30.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error30_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.30.1	INTEGER	read-only	Contains a time stamp indicating when error 30 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error31	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.31
INT error31_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.31.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error31_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.31.1	INTEGER	read-only	Contains a time stamp indicating when error 31 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error32	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.32
INT error32_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.32.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error32_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.32.1	INTEGER	read-only	Contains a time stamp indicating when error 32 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error33	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.33
INT error33_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.33.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error33_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.33.1	INTEGER	read-only	Contains a time stamp indicating when error 33 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error34	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.34
INT error34_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.34.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error34_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.34.1	INTEGER	read-only	Contains a time stamp indicating when error 34 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error35	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.35
INT error35_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.35.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error35_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.35.1	INTEGER	read-only	Contains a time stamp indicating when error 35 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error36	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.36
INT error36_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.36.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error36_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.36.1	INTEGER	read-only	Contains a time stamp indicating when error 36 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error37	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.37
INT error37_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.37.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error37_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.37.1	INTEGER	read-only	Contains a time stamp indicating when error 37 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error38	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.38
INT error38_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.38.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error38_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.38.1	INTEGER	read-only	Contains a time stamp indicating when error 38 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error39	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.39
INT error39_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.39.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error39_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.39.1	INTEGER	read-only	Contains a time stamp indicating when error 39 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error4	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.4
INT error4_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.4.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error4_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.4.1	INTEGER	read-only	Contains a time stamp indicating when error 4 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error40	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.40
INT error40_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.40.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error40_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.40.1	INTEGER	read-only	Contains a time stamp indicating when error 40 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error41	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.41
INT error41_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.41.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error41_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.41.1	INTEGER	read-only	Contains a time stamp indicating when error 41 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error42	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.42
INT error42_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.42.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error42_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.42.1	INTEGER	read-only	Contains a time stamp indicating when error 42 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error43	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.43
INT error43_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.43.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error43_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.43.1	INTEGER	read-only	Contains a time stamp indicating when error 43 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error44	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.44
INT error44_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.44.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error44_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.44.1	INTEGER	read-only	Contains a time stamp indicating when error 44 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error45	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.45
INT error45_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.45.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error45_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.45.1	INTEGER	read-only	Contains a time stamp indicating when error 45 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error46	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.46
INT error46_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.46.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error46_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.46.1	INTEGER	read-only	Contains a time stamp indicating when error 46 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error47	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.47
INT error47_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.47.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error47_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.47.1	INTEGER	read-only	Contains a time stamp indicating when error 47 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error48	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.48
INT error48_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.48.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error48_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.48.1	INTEGER	read-only	Contains a time stamp indicating when error 48 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error49	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.49
INT error49_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.49.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error49_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.49.1	INTEGER	read-only	Contains a time stamp indicating when error 49 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error5	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.5
INT error5_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.5.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error5_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.5.1	INTEGER	read-only	Contains a time stamp indicating when error 5 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error50	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.50
INT error50_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.50.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error50_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.50.1	INTEGER	read-only	Contains a time stamp indicating when error 50 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error6	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.6
INT error6_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.6.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error6_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.6.1	INTEGER	read-only	Contains a time stamp indicating when error 6 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error7	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.7
INT error7_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.7.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error7_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.7.1	INTEGER	read-only	Contains a time stamp indicating when error 7 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error8	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.8
INT error8_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.8.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error8_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.8.1	INTEGER	read-only	Contains a time stamp indicating when error 8 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
error9	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.9
INT error9_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.9.2	INTEGER	read-only	Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.
INT error9_time_stamp	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.9.1	INTEGER	read-only	Contains a time stamp indicating when error 9 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. Additional information: See ERROR1-TIME-STAMP.
errorlog	1.3.6.1.4.1.11.2.3.9.4.2.1.1.11
file_system	1.3.6.1.4.1.11.2.3.9.4.2.1.1.10
INT file_system_max_open_files	1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.2	INTEGER	read-write	The number of open files allowed at one time. Opening a file when the maximum number of files are currently open will fail. Additional information: Indicates the number of open files a personality (e.g. PCL or PostScript) is guaranteed to be able to open before the file system runs out of file handles. After writing this object, the printer must be rebooted before the change takes effect. Performing a cold reset sets this object back to the factory default value. Returns status if attempting to access this object and there is no storage device is installed.
INT file_system_memory	1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.1	INTEGER	read-only	The amount of memory, in bytes, used by the file system to buffer file data. Additional information: Reports the amount of memory, in bytes, reserved for use by the file system. Returns status if attempting to access this object and there is no storage device is installed.
INT file_system_statistic_current_memory_usage	1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.2.5	INTEGER	read-only	A value indicating the number of bytes of RAM currently used by the file system firmware. Additional information: Reset to the factory default value after a power cycle. Returns status if attempting to access this object and there is no storage device is installed.
INT file_system_statistic_max_memory_usage	1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.2.6	INTEGER	read-only	A value indicating the maximum number of bytes of RAM used by the file system firmware. The POS should state if the value is reset to zero after a power cycle. Additional information: Reset to the factory default value after a power cycle. Returns status if attempting to access this object and there is no storage device is installed.
INT file_system_statistic_read_open	1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.2.1	INTEGER	read-only	The number of times the file system has received requests to open a file for reading. Opening a file for both reading and writing will cause this value to change. The POS should state if a power cycle causes the counter is be reset to zero. Additional information: Reset to the factory default value after a power cycle. Returns status if attempting to access this object and there is no storage device is installed.
INT file_system_statistic_successful	1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.2.3	INTEGER	read-only	A counter indicating the number of file system requests that completed successfully. The POS should state if a power cycle causes the counter is be reset to zero. Additional information: Reset to the factory default value after a power cycle. Returns status if attempting to access this object and there is no storage device is installed.
INT file_system_statistic_unsuccessful	1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.2.4	INTEGER	read-only	A counter indicating the number of file system requests that completed unsuccessfully. The POS should state if a power cycle causes the counter is be reset to zero. Additional information: Reset to the factory default value after a power cycle. Returns status if attempting to access this object and there is no storage device is installed.
INT file_system_statistic_write_open	1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.2.2	INTEGER	read-only	The number of times the file system has received requests to open a file for writing. Opening a file for both reading and writing will cause this value to change. The POS should state if a power cycle causes the counter is be reset to zero. Additional information: Reset to the factory default value after a power cycle. Returns status if attempting to access this object and there is no storage device is installed.
file_system2	1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.3.2
INT file_system2_initialize_volume	1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.3.2.6	INTEGER	write-only	Setting this object to eInitializing causes file system 2 to be initialized. Reading this object indicates if the file system is currently being initialized. Additional information: The hrDeviceIndex value for the mass storage device is the same value that is used to index into the FILE-SYSTEM sub-tree. Since this product only supports one mass storage device, and since the hrDeviceIndex for the mass storage device will be 2 if the mass storage device is installed, the FILE-SYSTEM2-INITIALIZE-VOLUME object will be the object that allows the mass storage device to be initialized.
file_systems	1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.3
INT form_feed	1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.5	INTEGER	write-only	Instructs the PDL processing sub-system to finishing processing the current page of the current job. Form feed is also known as close page or eject page. If the PDL processing sub-system is in a FORM-FEED-NEEDED state, this causes the device to flush or finish processing the current page of the current job. If the device is not in the FORM-FEED-NEEDED state, an will occur. Additional information: The printer must be offline before attempting to perform a form feed, otherwise a status will be returned.
INT form_feed_needed	1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.2.2	INTEGER	read-only	Indicates if the PDL processing sub-system has made marks on the current page and the source subsystem has been idle for a device specific amount of time. Additional information: LaserJet 5Si will set this object to eTrue when a personality has made marks on the current page, the personality timeout has expired and no data is pending on another I/O. Once it is set to eTrue, more data on the same I/O will cause this object to be set to eFalse, until the above conditions are met again.
hp	1.3.6.1.4.1.11
hpsystem	1.3.6.1.4.1.11.2.3
hrDevice	1.3.6.1.4.1.11.2.3.9.4.2.3.3
OCT hrdevicedescr	1.3.6.1.4.1.11.2.3.9.4.2.3.3.2.1.3	OCTET STRING	read-only	A textual description of this device, including the device's manufacturer and revision, and optionally, its serial number. Additional information: This object is not localized.
hrDeviceEntry	1.3.6.1.4.1.11.2.3.9.4.2.3.3.2.1
INT hrdeviceerrors	1.3.6.1.4.1.11.2.3.9.4.2.3.3.2.1.6	INTEGER	read-only	The number of errors detected on this device. It should be noted that as this object has a SYNTAX of Counter, that it does not have a defined initial value. However, it is recommended that this object be initialized to zero. Additional information: This is the number of critical alerts that have been entered into the alert table since the device was powered on. The maximum value for this object is 2^32-1.
OID hrdeviceid	1.3.6.1.4.1.11.2.3.9.4.2.3.3.2.1.4	OBJECT IDENTIFIER	read-only	The product ID for this device. Additional information: The complete OID reported by this object is: .1.3.6.1.4.1.11.2.3.9.1.2.1
INT hrdeviceindex	1.3.6.1.4.1.11.2.3.9.4.2.3.3.2.1.1	INTEGER	read-only	A unique value for each device contained by the host. The value for each device must remain constant at least from one re-initialization of the agent to the next re-initialization. Additional information: The entry in the Device Table which describes the printer.
INT hrdevicestatus	1.3.6.1.4.1.11.2.3.9.4.2.3.3.2.1.5	INTEGER	read-only	The current operational state of the device described by this row of the table. A value unknown(1) indicates that the current state of the device is unknown. running(2) indicates that the device is up and running and that no unusual error conditions are known. The warning(3) state indicates that agent has been informed of an unusual error condition by the operational software (e.g., a disk device driver) but that the device is still 'operational'. An example would be high number of soft errors on a disk. A value of testing(4), indicates that the device is not available for use because it is in the testing state. The state of down(5) is used only when the agent has been informed that the device is not available for any use. Additional information: The printer's condition is mapped as follows: eHrunning -- Printer ready to print or is printing. May be in power save mode. eHwarning -- A condition exists that needs attention but it is not currently preventing printing. A non-critical alert is active. eHtesting -- Printer is printing an internal page. eHdown -- Printer is not printing due to an error condition. A critical alert is active, human interaction is needed to bring the printer to a ready state or the printer is offline.
hrDeviceTable	1.3.6.1.4.1.11.2.3.9.4.2.3.3.2
OID hrdevicetype	1.3.6.1.4.1.11.2.3.9.4.2.3.3.2.1.2	OBJECT IDENTIFIER	read-only	An indication of the type of device. If this value is `hrDeviceProcessor { hrDeviceTypes 3 }' then an entry exists in the hrProcessorTable which corresponds to this device. If this value is `hrDeviceNetwork { hrDeviceTypes 4 }', then an entry exists in the hrNetworkTable which corresponds to this device. If this value is `hrDevicePrinter { hrDeviceTypes 5 }', then an entry exists in the hrPrinterTable which corresponds to this device. If this value is `hrDeviceDiskStorage { hrDeviceTypes 6 }', then an entry exists in the hrDiskStorageTable which corresponds to this device.
hrm	1.3.6.1.4.1.11.2.3.9.4.2.3
INT hrmemorysize	1.3.6.1.4.1.11.2.3.9.4.2.3.2.2	INTEGER	read-only	The amount of physical main memory contained by the host. Additional information: The unit of measure for this object is 1024 bytes. The default value assumes the base printer with no additional memory.
OCT hrprinterdetectederrorstate	1.3.6.1.4.1.11.2.3.9.4.2.3.3.5.1.2	OCTET STRING	read-only	This object represents any error conditions detected by the printer. The error conditions are encoded as bits in an octet string, with the following definitions: Condition Bit # hrDeviceStatus lowPaper 0 warning(3) noPaper 1 down(5) lowToner 2 warning(3) noToner 3 down(5) doorOpen 4 down(5) jammed 5 down(5) offline 6 down(5) serviceRequested 7 warning(3) If multiple conditions are currently detected and the hrDeviceStatus would not otherwise be unknown(1) or testing(4), the hrDeviceStatus shall correspond to the worst state of those indicated, where down(5) is worse than warning(3) which is worse than running(2). Bits are numbered starting with the most significant bit of the first byte being bit 0, the least significant bit of the first byte being bit 7, the most significant bit of the second byte being bit 8, and so on. A one bit encodes that the condition was detected, while a zero bit encodes that the condition was not detected. This object is useful for alerting an operator to specific warning or error conditions that may occur, especially those requiring human intervention. Additional information: LaserJet 5Si reports error conditions as follows: lowPaper -- A tray is empty, but the media to be loaded is not currently needed. hrDeviceStatus = eHwarning; hrPrinterStatus = eHidle or eHprinting; a non-critical alert is active. noPaper -- A tray is empty and must be filled for printing to continue. hrDeviceStatus = eHdown; hrPrinterStatus = eHother; a non-critical alert is active. lowToner -- A toner low condition has been detected. hrDeviceStatus = eHwarning; hrPrinterStatus = eHidle or eHprinting; a non-critical alert is active. noToner -- LaserJet 5Si does not report this condition. doorOpen -- A door is open. hrDeviceStatus = eHdown; hrPrinterStatus = eHother; a non-critical alert is active. jammed -- A jam condition is preventing printing. hrDeviceStatus = eHdown; hrPrinterStatus = eHother; a non-critical alert is active. offline -- Printer is offline. hrDeviceStatus = eHdown; hrPrinterStatus = eHother; a non-critical alert is active. serviceRequested -- Any status or error condition not listed above. If the condition prevents printing, the 'offline' bit is also set and its hrDeviceStatus and hrPrinterStatus would prevail. hrDeviceStatus = eHwarning; hrPrinterStatus = eHidle or eHprinting; a non-critical alert is active.
hrPrinterEntry	1.3.6.1.4.1.11.2.3.9.4.2.3.3.5.1
INT hrprinterstatus	1.3.6.1.4.1.11.2.3.9.4.2.3.3.5.1.1	INTEGER	read-only	The current status of this printer device. When in the idle(1), printing(2), or warmup(3) state, the corresponding hrDeviceStatus should be running(2) or warning(3). When in the unknown state, the corresponding hrDeviceStatus should be unknown(1). Additional information: The printer's condition is mapped as follows: eHidle -- The printer is not doing any of the items listed below for eHprinting status. eHprinting -- The printer is processing PJL or PDL data, waiting for an error condition to be cleared, processing a control panel request, waiting for the engine to become ready or printing images. eHwarmup -- If hrDeviceStatus is eHdown, then the printer is currently offline but is resolving the condition that caused it be offline it will be online when it is ready to print. If hrDeviceStatus is eHrunning, then the printer was in power save mode and is now becoming ready to print.
hrPrinterTable	1.3.6.1.4.1.11.2.3.9.4.2.3.3.5
hrStorage	1.3.6.1.4.1.11.2.3.9.4.2.3.2
INT hrstorageallocationfailures	1.3.6.1.4.1.11.2.3.9.4.2.3.2.3.1.7	INTEGER	read-only	The number of requests for storage represented by this entry that could not be honored due to not enough storage. It should be noted that as this object has a SYNTAX of Counter, that it does not have a defined initial value. However, it is recommended that this object be initialized to zero. Additional information: This object is set to zero at power on and when any reset is done via prtGeneralReset. This object is incremented whenever the printer is short on memory.
INT hrstorageallocationunits	1.3.6.1.4.1.11.2.3.9.4.2.3.2.3.1.4	INTEGER	read-only	The size, in bytes, of the data objects allocated from this pool. If this entry is monitoring sectors, blocks, buffers, or packets, for example, this number will commonly be greater than one. Otherwise this number will typically be one. Additional information: Unit is one byte.
OCT hrstoragedescr	1.3.6.1.4.1.11.2.3.9.4.2.3.2.3.1.3	OCTET STRING	read-only	A description of the type and instance of the storage described by this entry. Additional information: This object is not localized.
hrStorageEntry	1.3.6.1.4.1.11.2.3.9.4.2.3.2.3.1
INT hrstorageindex	1.3.6.1.4.1.11.2.3.9.4.2.3.2.3.1.1	INTEGER	read-only	A unique value for each logical storage area contained by the host.
INT hrstoragesize	1.3.6.1.4.1.11.2.3.9.4.2.3.2.3.1.5	INTEGER	read-only	The size of the storage represented by this entry, in units of hrStorageAllocationUnits. Additional information: Total formatter RAM.
hrStorageTable	1.3.6.1.4.1.11.2.3.9.4.2.3.2.3
OID hrstoragetype	1.3.6.1.4.1.11.2.3.9.4.2.3.2.3.1.2	OBJECT IDENTIFIER	read-only	The type of storage represented by this entry.
INT hrstorageused	1.3.6.1.4.1.11.2.3.9.4.2.3.2.3.1.6	INTEGER	read-only	The amount of the storage represented by this entry that is allocated, in units of hrStorageAllocationUnits. Additional information: This object should not be used when creating a print job for the device because the amount of memory in use will likely be different when the printer processes the print job.
id	1.3.6.1.4.1.11.2.3.9.4.2.1.1.3
imaging	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.6
interface	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4
intray	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3
intray4	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.4
intray5	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.5
intrays	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3
io	1.3.6.1.4.1.11.2.3.9.4.2.1.2.1
INT io_buffer_size	1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1.6	INTEGER	read-write	Returns or configures the amount of memory, in bytes, dedicated to I/O print job data buffering. Attempting to set to an unsupported value causes the device to use the closest supported value. Each device POS should document the list of supported values. Additional information: When IO-BUFFERING is eOff, reading this object will return a value of zero. Attempting to set this object when IO-BUFFERING is eOff will cause a status of to be returned. When IO-BUFFERING is eAuto, the printer determines the value of this object. Attempting to set this object when IO-BUFFERING is eAuto will cause a status of to be returned. Reading this object when IO-BUFFERING is eAuto will return the value that is currently being used by the printer; the value is based on the printer configuration and is as follows: PCL-only: If 4M installed, 10240; if >4M installed, 102400 for each 1M over 4M. PCL & PS: If 12M installed, 102400 for each 1M over 12M. PCL, PS & Duplex Unit: If 23M installed, 102400 for each 1M over 23M. When IO-BUFFERING is eOn, the range of values supported by this object varies depending on the printer's configuration. The minimum value is 10240; the maximum value is the current value of this object plus the value of MAXIMUM-IO-BUFFERING-MEMORY. Supported values are multiples of 10240 for values less or equal to 97280 and multiples of 102400 for values greater than 97280. Setting to an unsupported value causes the printer to substitute the nearest supported value and to return status.
INT io_buffering	1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1.5	INTEGER	read-write	Returns or controls the manner in which the device performs I/O data buffering. I/O data buffering allows additional print job data to be buffered by the I/O sub- system in an effort to allow the computer sending the data to perform other tasks and to keep the PDL processing sub-system busy. eOff, I/O buffering is disabled. When eOn, I/O buffering is enabled and the IO-BUFFER-SIZE object controls the amount of memory set aside for I/O buffer. When eAuto, I/O buffering is enabled and the I/O buffer size is determined automatically by the device and the IO-BUFFER-SIZE object is not used. Additional information: In a PCL-only printer, all values may be set at any time. When PostScript is installed and there is less than 12M of memory installed, setting this object to eOn or eAuto will cause to be returned. When PostScript and a duplex unit are installed and there is less than 23M of memory installed, setting this object to eOn or eAuto will cause to be returned. When PostScript and 12M (23M with duplex unit) or more are installed, all values are valid, provided Resource Saving has not consumed the needed memory.
INT io_switch	1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1.2	INTEGER	read-only	Indicates if the device will switch between I/O channels when a job boundary is encountered and print job data is available on another I/O channel.
INT io_timeout	1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1.1	INTEGER	read-write	The amount of time, in seconds, to wait for more print job data to be received before an I/O timeout occurs. The I/O channel being timed is the I/O channel that received the data associated with the current print job. If an I/O timeout occurs, the PDL processing sub-system assumes all the data associated with the current print job has been received, and processes the end of job in an PDL specific manner. The POS specifies the supported values. Additional information: If an I/O timeout occurs, the PDL processing sub-system will consider it an end of job condition only if there is data from another I/O subsystem waiting to be processed. The supported values are 5 to 300 seconds. Setting to a value outside the supported range returns status. Although the Control Panel restricts the values that may be set, any value within the limits may be set by this object.
job	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6
job_being_parsed	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.2.1
job_info	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5
OCT job_info_attr_1	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.1	OCTET STRING	read-only	Returns the value that was set in PJL via the SET JOBATTR= command. Attribute objects are saved sequentially, starting with 1, after the start of a job. If more attributes are set than there are objects to store them, the excess JOBATTR values are ignored. If the corresponding SET JOBATTR= command has not been received when a get is done for this object, a status of will be returned.
OCT job_info_attr_10	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.10	OCTET STRING	read-only	Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.
OCT job_info_attr_11	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.11	OCTET STRING	read-only	Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.
OCT job_info_attr_12	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.12	OCTET STRING	read-only	Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.
OCT job_info_attr_13	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.13	OCTET STRING	read-only	Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.
OCT job_info_attr_14	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.14	OCTET STRING	read-only	Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.
OCT job_info_attr_15	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.15	OCTET STRING	read-only	Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.
OCT job_info_attr_16	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.16	OCTET STRING	read-only	Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.
OCT job_info_attr_17	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.17	OCTET STRING	read-only	Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.
OCT job_info_attr_18	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.18	OCTET STRING	read-only	Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.
OCT job_info_attr_19	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.19	OCTET STRING	read-only	Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.
OCT job_info_attr_2	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.2	OCTET STRING	read-only	Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.
OCT job_info_attr_20	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.20	OCTET STRING	read-only	Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.
OCT job_info_attr_21	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.21	OCTET STRING	read-only	Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.
OCT job_info_attr_22	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.22	OCTET STRING	read-only	Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.
OCT job_info_attr_23	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.23	OCTET STRING	read-only	Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.
OCT job_info_attr_24	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.24	OCTET STRING	read-only	Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.
OCT job_info_attr_25	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.25	OCTET STRING	read-only	Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.
OCT job_info_attr_26	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.26	OCTET STRING	read-only	Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.
OCT job_info_attr_27	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.27	OCTET STRING	read-only	Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.
OCT job_info_attr_28	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.28	OCTET STRING	read-only	Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.
OCT job_info_attr_29	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.29	OCTET STRING	read-only	Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.
OCT job_info_attr_3	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.3	OCTET STRING	read-only	Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.
OCT job_info_attr_30	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.30	OCTET STRING	read-only	Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.
OCT job_info_attr_31	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.31	OCTET STRING	read-only	Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.
OCT job_info_attr_32	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.32	OCTET STRING	read-only	Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.
OCT job_info_attr_4	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.4	OCTET STRING	read-only	Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.
OCT job_info_attr_5	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.5	OCTET STRING	read-only	Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.
OCT job_info_attr_6	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.6	OCTET STRING	read-only	Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.
OCT job_info_attr_7	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.7	OCTET STRING	read-only	Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.
OCT job_info_attr_8	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.8	OCTET STRING	read-only	Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.
OCT job_info_attr_9	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.9	OCTET STRING	read-only	Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.
job_info_attribute	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23
OCT job_info_change_id	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.3	OCTET STRING	read-only	Returns the current value of an object in the job-info sub-tree whose value has changed. Define the object identifier for the object whose value has changed as job-info.required-field.optional-field.job-id. job-info represents the OID prefix of all objects in the job-info sub-tree. Required-field represents the OID field value that follows the job-info prefix. Since some objects in the job-info sub-tree have two OID fields between the job-info prefix and the job-id, the optional-field represents the OID field between the required-field and the job-id field, if present. Using this definition, the format for the JOB-INFO-CHANGE-ID binary value can be described as follows: Bytes 0-3 : required-field Bytes 4-7 : optional-field, or all zeros if there is no optional field Bytes 8-11: Job ID. Bytes 12-n : The value of the object job-info. required-field.optional-field.job-id. All multi-byte values stored in Motorola (big-endian) format, where the most significant byte occurs first. Additional information: LaserJet 5Si will use this object to report changes of the job-info-pages-printed and job-info-state objects. Therefore, the optional-field will always be zeroes and, because both of these are integers, the value portion of the data will always be four bytes.
INT job_info_io_source	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.11	INTEGER	read-only	Indicates which I/O source, the print job was received over. The value maps to port numbering scheme supported in the DEVICE/SOURCE-SUBSYSTEM/IO/PORTS sub-tree.
STR job_info_name1	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.1	DisplayString	read-only	Contains the first part of this print job's name. The last OID field for this dynamic object contains the job ID. Additional information: The job name is the string specified by the NAME= parameter of the @PJL JOB command which allows a maximum of 80 characters. The first 40 characters are in this object and the second 40 are in JOB-INFO-NAME2. The symbol set is Roman-8. When jobs are nested, the value assigned to this object is the name provided by the most recent @PJL JOB NAME= command. If no name is is provided, a null string is returned. Whenever a @PJL JOB NAME= command is received, the trap occurs even if the name is the same.
STR job_info_name2	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.2	DisplayString	read-only	Contains the second part of this print job's name. The last OID field for this dynamic object contains the job ID. Additional information: See JOB-INFO-NAME1.
OCT job_info_outbins_used	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.20	OCTET STRING	read-only	Indicates which output bins this job has delivered printed pages to. The last OID field for this dynamic object contains the job ID. Additional information: This is the logical bin. If a bin is used as an overflow bin, then its bit will be set as well. cOutbin1 is the top/face-down bin. cOutbin2 is the left/face-up bin.
INT job_info_outcome	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.19	INTEGER	read-only	Indicates if any warning or error conditions were encountered while processing the assoicated job. The last OID field for this dynamic object contains the job ID.
INT job_info_pages_printed	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.13	INTEGER	read-only	Indicates the number of pages printed by the destination subsystem. If non of the cSourceSubsystem, cProcessingSubsystem or cDestinationSubsystem items are in the associated JOB-INFO-STAGE object, then this object contains the total number of pages printed for this job. This value may increase by two each time for duplex jobs. The last OID field for this dynamic object contains the job ID. Additional information: If multiple copies of a page are printed, each copy is counted individually.
INT job_info_pages_processed	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.12	INTEGER	read-only	Indicates the number of pages processed by the processing subsystem. If neither the cSourceSubsystem or the cProcessingSubsystem items are in the associated JOB-INFO-STAGE object, then this object contains the total number of pages processed for this job. The last OID field for this dynamic object contains the job ID. Additional information: This object is incremented by one when a page is processed, regardless of the number of pages that are printed as a result of the single page processed. In other words, it does not matter how many identical copies of a page are printed, or no pages may be printed if operating in silent run mode, this count is incremented only once. A page is considered processed when all of the input data has been processed for a page; the image of the page is not necessarily completely formed.
OCT job_info_physical_outbins_used	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.22	OCTET STRING	read-only	Indicates which physical output bins this job has delivered printed pages to. The last OID field for this dynamic object contains the job ID. Additional information: Bits in this object are set only if printed pages were delivered to an external paper handling device. This object is supported regardless of whether or not an external device is installed. The bits set map to the device's bins in a device specific manner. If the device does not report to the formatter which bins are used, then no bits will be set. For the HCO, the bins map to the bits as follows: cOutbin1--Face-up bin cOutbin2--Bin1 cOutbin3--Bin2 cOutbin4--Bin3 cOutbin5--Bin4 cOutbin6--Bin5 cOutbin7--Bin6 cOutbin8--Bin7 cOutbin9--Bin8
INT job_info_size	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.14	INTEGER	read-only	Indicates the number of bytes of data processed by the processing subsystem. If neither of the cSourceSubsystem or cProcessingSubsystem items are in the associated JOB-INFO-STAGE object, then this object contains the size of this job, in bytes. The last OID field for this dynamic object contains the job ID. Additional information: This count may be incremented by values other than one as blocks of data are processed; blocks of data (which may be as large as 2K bytes) will be processed in a varying amount of time. When a job completes, this count may not be the same as the total number of bytes sent to the printer since some data before or after the job may be considered to be outside the job. Also, for ill-formed PostScript jobs (ones that do not use the ENTER LANGUAGE command) will be reported as having approximately 256 extra bytes due to the way the language switching is accomplished.
OCT job_info_stage	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.10	OCTET STRING	read-only	Indicates what printer sub-systems are currently processing this print job. The last OID field for this dynamic object contains the job ID. cSourceSubsystem - some of the job is in the printer I/O subsystem. cProcessingSubsystem - some of the job is in the printer imaging processing subsystem. cDestinationSubsystem - some of the job is being printed. Additional information: For LaserJet 5Si cSourceSubsystem and cProcessingSubsystem will always be set and cleared together. A non-printing job will never set cDestinationSubsystem. When a page is ready to be printed, cDestinationSubsystem will be set even if a page of a previous job is currently being printed. cDestinationSubsystem remains set until the last page of the job has reached an output bin. If a page requires extensive processing and allows all the previous pages of a job to complete printing cDestinationSubsystem will remain set until the last page of the job is closed.
INT job_info_state	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.15	INTEGER	read-only	Indicates the state of the job. The last OID field for this dynamic object contains the job ID. eAborted - the print job was aborted. eWaitingForResources - the print job requires resources that are not currently available. ePrinted - the job has printed. The related JOB-INFO- OUTCOME object indicates if any problems were encountered while the job was processed. eRetained - the job can be reprinted. eTerminating - the job was aborted or cancelled and is currently is terminating. eInterrupted - the job has been interrupted. The job can be continued. ePaused - the job has been paused. The job can be continuted. eCancelled - the job has been cancelled. eProcessing - the job is currently being printed normally.
OCT job_input_auto_continue_mode	1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.36	OCTET STRING	read-write	Returns or sets the device behavior when the desired media is not currently available. cCancelJob - The device cancels the job. The device POS should explain what happens if this item is not the only item in the collection. cAutoMediaSizeOverride - The device is allowed to substitute a different size media. cAutoMediaNameOverride - The device is allowed to substitute a different media name. Additional information: If cCancelJob is set, the current print job will be canceled regardless of other item settings. At least one bit of the collection must be set; setting this object to zero will cause a status of to be returned. This object applies to all media requests, including Manual Feed Requests. This object describes the action that is performed when the JOB-INPUT-AUTO-CONTINUE-TIMEOUT expires. The action performed by the CONTINUE object being set to eInitiateAction or the Select key being pressed on the control panel may cause different actions.
INT job_input_auto_continue_timeout	1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.35	INTEGER	read-write	The number of seconds the device waits after a job related continuable error occurs before automatically continuing. An example job related continuable error is the job requesting a media size that is not available. After the timeout expires, the device will continue processing the job as if a continue event occurred, such as the front panel continue key being pressed. If the value is -1, the device does not automatically continue after a job related continuable error occurs. If the value is 0, the device immediately continues. If the value is greater than 0, the value represents the timeout value in seconds. Additional information: This object is used only for media requests (size and/or name). LaserJet 5Si supports any value in the range of -1 to 3600. Setting to a value outside of that range causes the printer to substitute a value (listed below) and to return status. The values are as follow: 3600 snaps to 3600 (60 minutes) The action that occurs when this timeout expires is explained by JOB-INPUT-AUTO-CONTINUE-MODE. It is not the same as the CONTINUE object being set to eInitiateAction or the Select key being pressed on the control panel.
INT job_output_auto_continue_timeout	1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.40	INTEGER	read-write	Returns or sets the time that the printer will wait after an output bin becomes full and the printer is trying to deliver a sheet of media to that output bin. When the timeout expires, the job is processed according to the OUTBINn-OVERRIDE-MODE. A value of -1 indicates that the printer will wait for a continue event. A non- negative value is the number of seconds to wait. Additional information: A value of zero means to continue immediately.
INT low_marking_agent_processing	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.5.1.3	INTEGER	read-write	Returns or changes how the device processes a low marking agent event. If eCont, then the device continues to print. If eStop, then the device stops until a continue event occurs.
marking_agent	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.5
mass_storage_bd2	1.3.6.1.4.1.11.2.3.9.4.2.1.1.15.3.2
mass_storage_block_driver	1.3.6.1.4.1.11.2.3.9.4.2.1.1.15
mass_storage_block_drivers	1.3.6.1.4.1.11.2.3.9.4.2.1.1.15.3
INT mass_storage_resource_change_counter	1.3.6.1.4.1.11.2.3.9.4.2.1.1.12.3.1	INTEGER	read-only	A counter which changes when a mass storage based resource has been added or deleted. Additional information: The value of this counter changes each time the MASS-STORAGE-RESOURCE-CHANGED object is set to eTrue. The value also changes when the mass storage device is initialized. However, the value does not change when a mass storage device is removed and a different mass storage device is installed. Performing a cold reset sets this object back to the factory default value. Returns status if attempting to access this object and there is no storage device is installed.
INT mass_storage_resource_changed	1.3.6.1.4.1.11.2.3.9.4.2.1.1.12.3.2	INTEGER	write-only	Setting to eTrue causes MASS-STORAGE-RESOURCE-CHANGE- COUNTER to be incremented. Additional information: Returns status if attempting to access this object and there is no storage device is installed.
mass_storage_resources	1.3.6.1.4.1.11.2.3.9.4.2.1.1.12.3
INT maximum_io_buffering_memory	1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1.7	INTEGER	read-only	Returns the maximum amount of additional memory, in bytes, that can be dedicated to buffering print job data. Additional information: Memory for I/O Buffering is allocated in increments of 102400 bytes. Therefore, for each 1M (1048576 bytes) of memory added to the printer, 1024000 bytes are made available to resource saving (and I/O buffering) and 24576 bytes are retained until an additional 102400 byte block can be made available. The value reported by this object is always rounded down to the nearest multiple of 102400. The values listed below assume that IO-BUFFERING=eOff; if IO-BUFFERING=eOn, the value returned by this object will be reduced by the amount of memory used by the IO-BUFFERING object. For a PCL-only printer, the value of this object is 102400 if 4M memory is installed or all the memory over 4M. If PostScript is installed without a duplex unit, the value of this object is as follows: 0K if <12M memory is installed. 102400 if 12M memory is installed. All over 12M memory installed. If PostScript is installed with a duplex unit, the value of this object is as follows: 0K if <23M memory is installed. 102400 if 23M memory is installed. All over 23M memory installed.
INT maximum_resource_saving_memory	1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.7	INTEGER	read-only	Returns the maximum amount of additional memory, in bytes, that can be dedicated to holding PDL permanent soft resources. Additional information: The following numbers assume that IO-BUFFERING=eOff; if IO-BUFFERING<>eOff, the following numbers will be reduced by the value of IO-BUFFER-SIZE. Memory for resource saving is allocated in increments of 102400 bytes. Therefore, for each 1M (1048576 bytes) of memory added to the printer, 1024000 bytes are made available to resource saving (and I/O buffering) and 24576 bytes are retained until an additional 102400 byte block can be made available. The value reported by this object is always rounded down to the nearest multiple of 102400. For a PCL-only printer, the value of this object is zero (all resource saving memory is dedicated to PCL). If PostScript is installed without a duplex unit, the value of this object is as follows: Zero if <13M memory is installed. 1024000 if 13M memory is installed and RESOURCE-SAVING=eOff. 1024000 if 13M memory is installed and RESOURCE-SAVING=eOn (note that this value will be reduced by the amount of memory allocated to PCL-RESOURCE-SAVING-MEMORY-SIZE and POSTSCRIPT-RESOURCE-SAVING-MEMORY-SIZE). 204800 if 13M memory is installed and RESOURCE-SAVING=eAuto. When RESOURCE-SAVING=eAuto, 204800 bytes of each 1M over 13M memory installed are allocated to PCL and PostScript (102400 each) with the remaining bytes added to this object. When RESOURCE-SAVING=eOn or eOff, all bytes over 13M memory installed are added to this object. If PostScript is installed with a duplex unit, the value of this object is as follows: Zero if <24M memory is installed. 1024000 if 24M memory is installed and RESOURCE-SAVING=eOff. 1024000 if 24M memory is installed and RESOURCE-SAVING=eOn (note that this value will be reduced by the amount of memory allocated to PCL-RESOURCE-SAVING-MEMORY-SIZE and POSTSCRIPT-RESOURCE-SAVING-MEMORY-SIZE). 204800 if 24M memory is installed and RESOURCE-SAVING=eAuto. When RESOURCE-SAVING=eAuto, 204800 bytes of each 1M over 24M memory installed are allocated to PCL and PostScript (102400 each) with the remaining bytes added to this object. When RESOURCE-SAVING=eOn or eOff, all bytes over 24M memory installed are added to this object. The above listed values returned by this object will be reduced by the amount of memory added to PCL-RESOURCE-SAVING-MEMORY-SIZE and POSTSCRIPT-RESOURCE-SAVING-MEMORY-SIZE when RESOURCE-SAVING=eOn.
media_info	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3
OCT media_names_available	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.1.1	OCTET STRING	read-write	The value of this object controls which of the MEDIAx- NAME objects are supported. If a bit is set to zero, then attempting to get or set the corresponding MEDIAx- NAME objects will return . Additional information: Setting a bit to one will cause the corresponding MEDIAn- objects to be available (attempting to access an unavailable object will return ). MEDIA1- objects are always present in LaserJet 5Si, as this is the default media. If this object is set to a value that does not include cMediaName1Available, that bit will be set and a status of will be returned.
media1	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.1
STR media1_name	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.1.1	DisplayString	read-only	Media 1 name. Additional information: The symbol set for this string is Roman-8.
INT media1_page_count	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.1.3	INTEGER	read-only	Number of sheets of media 1 that have been printed. The device POS should state whether this value is lost across a power cycle or kept in NVRAM. Additional information: In LaserJet 5Si the media page count saved in NVRAM after every 10 pages. The maximum value is 4,294,967,295 which will never be reached in normal operation. The page count is incremented when a sheet of media is pulled from an input tray. A duplex printed sheet will cause this counter to be incremented by one.
STR media1_short_name	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.1.2	DisplayString	read-only	Length restricted version of the media name 1. The length restriction is required to allow the media name to be displayed on the device's control panel. The device POS must state the maximum number of characters allowed. If the device also has a limitation on what characters in a character set can be used (e.g. only uppercase characters allowed), the POS should also state character restrictions.
media10	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.10
STR media10_name	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.10.1	DisplayString	read-only	Media 10 name. Additional information: See MEDIA1-NAME.
INT media10_page_count	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.10.3	INTEGER	read-only	Number of sheets of media 10 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT.
STR media10_short_name	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.10.2	DisplayString	read-only	Length restricted version of the media name 10. See MEDIA1-SHORT-NAME for details.
media11	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.11
STR media11_name	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.11.1	DisplayString	read-write	Media 11 name. Additional information: The maximum supported string length is 24 bytes. If the user entered string is too long, the device will store the first 24 bytes and return the status. See CAUTION statement under Product Specific Use.
INT media11_page_count	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.11.3	INTEGER	read-only	Number of sheets of media 11 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT.
STR media11_short_name	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.11.2	DisplayString	read-write	Length restricted version of the media name 11. See MEDIA1-SHORT-NAME for details. Additional information: The maximum supported string length is 10 characters. If the user entered string is too long, the device will store the first 10 characters and will return the status. The characters must be in the range 20H to 7FH except 5C cannot be used. The default symbol set is Roman-8 for English; additional legal symbol sets are ISOLatin5, ISOLatin2 and Windows31J. Setting this object with characters outside of the range or an illegal symbol set will cause an error status of to be returned.
media12	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.12
STR media12_name	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.12.1	DisplayString	read-write	Media 12 name. Additional information: See MEDIA11-NAME.
INT media12_page_count	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.12.3	INTEGER	read-only	Number of sheets of media 12 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA11-PAGE-COUNT.
STR media12_short_name	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.12.2	DisplayString	read-write	Length restricted version of the media name 12. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA11-SHORT-NAME.
media13	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.13
STR media13_name	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.13.1	DisplayString	read-write	Media 13 name. Additional information: See MEDIA11-NAME.
INT media13_page_count	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.13.3	INTEGER	read-only	Number of sheets of media 13 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA11-PAGE-COUNT.
STR media13_short_name	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.13.2	DisplayString	read-write	Length restricted version of the media name 13. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA11-SHORT-NAME.
media14	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.14
STR media14_name	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.14.1	DisplayString	read-write	Media 14 name. Additional information: See MEDIA11-NAME.
INT media14_page_count	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.14.3	INTEGER	read-only	Number of sheets of media 14 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA11-PAGE-COUNT.
STR media14_short_name	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.14.2	DisplayString	read-write	Length restricted version of the media name 14. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA11-SHORT-NAME.
media15	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.15
STR media15_name	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.15.1	DisplayString	read-write	Media 15 name. Additional information: See MEDIA11-NAME.
INT media15_page_count	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.15.3	INTEGER	read-only	Number of sheets of media 15 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA11-PAGE-COUNT.
STR media15_short_name	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.15.2	DisplayString	read-write	Length restricted version of the media name 15. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA11-SHORT-NAME.
media2	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.2
STR media2_name	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.2.1	DisplayString	read-only	Media 2 name. Additional information: See MEDIA1-NAME.
INT media2_page_count	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.2.3	INTEGER	read-only	Number of sheets of media 2 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT.
STR media2_short_name	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.2.2	DisplayString	read-only	Length restricted version of the media name 2. See MEDIA1-SHORT-NAME for details.
media3	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.3
STR media3_name	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.3.1	DisplayString	read-only	Media 3 name. Additional information: See MEDIA1-NAME.
INT media3_page_count	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.3.3	INTEGER	read-only	Number of sheets of media 3 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT.
STR media3_short_name	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.3.2	DisplayString	read-only	Length restricted version of the media name 3. See MEDIA1-SHORT-NAME for details.
media4	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.4
STR media4_name	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.4.1	DisplayString	read-only	Media 4 name. Additional information: See MEDIA1-NAME.
INT media4_page_count	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.4.3	INTEGER	read-only	Number of sheets of media 4 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT.
STR media4_short_name	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.4.2	DisplayString	read-only	Length restricted version of the media name 4. See MEDIA1-SHORT-NAME for details.
media5	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.5
STR media5_name	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.5.1	DisplayString	read-only	Media 5 name. Additional information: See MEDIA1-NAME.
INT media5_page_count	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.5.3	INTEGER	read-only	Number of sheets of media 5 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT.
STR media5_short_name	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.5.2	DisplayString	read-only	Length restricted version of the media name 5. See MEDIA1-SHORT-NAME for details.
media6	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.6
STR media6_name	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.6.1	DisplayString	read-only	Media 6 name. Additional information: See MEDIA1-NAME.
INT media6_page_count	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.6.3	INTEGER	read-only	Number of sheets of media 6 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT.
STR media6_short_name	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.6.2	DisplayString	read-only	Length restricted version of the media name 6. See MEDIA1-SHORT-NAME for details.
media7	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.7
STR media7_name	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.7.1	DisplayString	read-only	Media 7 name. Additional information: See MEDIA1-NAME.
INT media7_page_count	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.7.3	INTEGER	read-only	Number of sheets of media 7 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT.
STR media7_short_name	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.7.2	DisplayString	read-only	Length restricted version of the media name 7. See MEDIA1-SHORT-NAME for details.
media8	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.8
STR media8_name	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.8.1	DisplayString	read-only	Media 8 name. Additional information: See MEDIA1-NAME.
INT media8_page_count	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.8.3	INTEGER	read-only	Number of sheets of media 8 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT.
STR media8_short_name	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.8.2	DisplayString	read-only	Length restricted version of the media name 8. See MEDIA1-SHORT-NAME for details.
media9	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.9
STR media9_name	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.9.1	DisplayString	read-only	Media 9 name. Additional information: See MEDIA1-NAME.
INT media9_page_count	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.9.3	INTEGER	read-only	Number of sheets of media 9 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT.
STR media9_short_name	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.9.2	DisplayString	read-only	Length restricted version of the media name 9. See MEDIA1-SHORT-NAME for details.
mio	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3
mio1	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.1
STR mio1_manufacturing_info	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.1.3	DisplayString	read-only	Returns information describing the manufacture of the I/O card installed in MIO interface 1. May include serial number and firmware revision. Additional information: The format of the string returned is determined by the manufacturer of the MIO card. There is no standard for content of the string. If no card is installed, a null string is returned.
INT mio1_type	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.1.4	INTEGER	read-only	Returns an indication of the type of option installed in MIO interface 1. See SIMM1-TYPE for an explanation of the enumerations.
mio2	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.2
STR mio2_manufacturing_info	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.2.3	DisplayString	read-only	Returns information describing the manufacture of the I/O card installed in MIO interface 2. May include serial number and firmware revision. Additional information: The format of the string returned is determined by the manufacturer of the MIO card. There is no standard for content of the string. If no card is installed, a null string is returned.
INT mio2_type	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.2.4	INTEGER	read-only	Returns an indication of the type of option installed in MIO interface 2. See SIMM1-TYPE for an explanation of the enumerations.
STR model_name	1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.2	DisplayString	read-only	Identifies the device model name (e.g. ''DeskJet 1200C''). The string is as specific as possible. Capitalization and spacing should match family naming conventions. Products should note in POS if the model name on the HP corporate price list changes but the device reports the previous device name. If the model name changes based on the installed options, the POS should indicate if only the base model name is returned, or if the device senses the installed options and returns the correct model name. If possible, encode the model name in a symbol set (like Roman-8) that matches the ASCII character set and limit the characters used to ASCII characters. Additional information: The value of this object does not change based on the installed options. Since the value of this object is frequently used in displaying a list of printers, it is kept relatively short in case systems have limited width for their display area.
STR model_number	1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.1	DisplayString	read-only	Identifies the device model number as listed in the HP corporate price list (e.g. C2121A for DeskJet 500C). The string is as specific as possible. Products should note in POS if the model number on the CPL changes but the device reports the previous model number. If the model number changes based on the installed options, the POS should indicate if only the base model number is returned, or if the device senses the installed options and returns the correct model number. If possible, encode the model number in a symbol set (like Roman-8) that matches the ASCII character set and limit the characters used to ASCII characters. Additional information: The value of this object does not change based on the installed options.
mount	1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.1
OCT mount_test_return_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.1.1.1	OCTET STRING	write-only	This test object that will not be supported in any released product. Setting this object allows the next mount call return code to be specified. The POS will specify the binary format. Additional information: A one byte binary value. The byte indicates what procedure is being effected by this set. value \| function ------+------------------ 1 \| Mount will return an fhstatus of 0. 2 \| Dump will return an empty table.
INT mp_tray	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.5	INTEGER	read-only	Returns or changes the value of the multi-purpose (MP) tray configuration variable. The MP tray can be configured to operate as an additional input tray (eCassette), a manual feed slot (eManual), or in a manner compatible with the LaserJet III manual feed slot (eFirst). If configured for eFirst, if media is present in the MP tray, that media is used (assuming the size matches and the print job didn't specify another tray) until the MP tray is empty. Additional information: LaserJet 5Si supports a slightly modified version of Cassette mode. The difference is that media will be pulled from Tray 1 (the MP tray) if there is a sheet present and it matches the needed size and type.
net_peripheral	1.3.6.1.4.1.11.2.3.9
netdm	1.3.6.1.4.1.11.2.3.9.4
nfs_server	1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.2
INT nfs_server_memory	1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.2.1.1	INTEGER	read-only	The amount of memory, in bytes, used by the Network File System server to buffer file data. Additional information: Reports the amount of memory, in bytes, reserved for use by the NFS server. A side effect of the implementation is initializing the mass storage device sets this object back to the factory default value. Also includes the memory used by other firmware components in addition to the NFS server. Returns status if attempting to access this object and there is no storage device is installed.
INT nfs_server_read_size	1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.2.1.2	INTEGER	read-write	The maximum amount of data transferred in one NFS server read data call. Additional information: A side effect of the implementation is initializing the mass storage device sets this object back to the factory default value. Returns status if attempting to access this object and there is no storage device is installed.
INT nfs_server_statistic_current_memory_usage	1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.2.2.4	INTEGER	read-only	A value indicating the number of bytes of RAM currently used by the NFS firmware. Additional information: Reset to the factory default value after a power cycle. Returns status if attempting to access this object and there is no storage device is installed.
INT nfs_server_statistic_max_memory_usage	1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.2.2.5	INTEGER	read-only	A value indicating the maximum number of bytes of RAM used by the NFS firmware. The POS should state if the value is reset to zero after a power cycle. Additional information: Reset to the factory default value after a power cycle. Returns status if attempting to access this object and there is no storage device is installed.
INT nfs_server_statistic_successful	1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.2.2.1	INTEGER	read-only	A counter indicating the number of NFS requests that completed without error. The POS should state if a power cycle causes the counter is be reset to zero. Additional information: Reset to the factory default value after a power cycle. Returns status if attempting to access this object and there is no storage device is installed.
INT nfs_server_statistic_unsuccessful	1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.2.2.2	INTEGER	read-only	A counter indicating the number of NFS requests that completed with an NFS status other than NFS_OK (0). The POS should state if a power cycle causes the counter is be reset to zero. Additional information: Reset to the factory default value after a power cycle. Returns status if attempting to access this object and there is no storage device is installed.
INT nfs_server_write_size	1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.2.1.3	INTEGER	read-write	The maximum amount of data transferred in one NFS server write data call. Additional information: A side effect of the implementation is initializing the mass storage device sets this object back to the factory default value. Returns status if attempting to access this object and there is no storage device is installed.
nm	1.3.6.1.4.1.11.2
INT on_off_line	1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.5	INTEGER	read-write	To bring the PDL processing sub-system on or off line. If the device is a printer, then the printer does not process print job data when the printer is off line. PML communication persists. Additional information: When the printer is in the Offline state, printing will stop as soon as possible (no more sheets of media are pulled from input trays). All I/O communication continues (no change from the Online state). Setting to eOnline has the following affect: Printer will immediately go to or remain in the Online state; status is returned. If the printer's current state is Offline with a pending error condition that prevents the printer from going to the Online state, the printer will remain in the Offline state; status is returned. Setting to eOffline has the following affect: Printer will immediately go to or remain in the Offline state; status is returned. If pages are being printed, those pages will complete with the printer in the Offline state. Setting to eOfflineAtEndOfJob has the following affect: If not in a job or already in the Offline state, the printer will immediately go to or remain in the Offline state; status is returned. If in a job and the current state is Online, the printer will remain in the Online state, with the value of this object as eOfflineAtEndOfJob, until the end of the job; status is returned. At the end of the job, the printer goes to the Offline state and the value of this object becomes eOffline. Setting this object to eOffline or eOnline before the end of the job causes the action for that value to be taken immediately.
outbin	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4
outbin1	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.1
OCT outbin1_override_mode	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.1.9	OCTET STRING	read-write	Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores the attention condition and continues printing. cBinderAttentionOverride - The device ignores the binder attention condition and continues printing. Additional information: If cCancelJob is set, the current print job will be cancelled regardless of other item settings. If cOutbinFullOverride is set and this bin is the designated overflow bin (OVERFLOW-BIN = 1), then the bit is ignored. This object describes the action that is performed when the JOB-OUTPUT-AUTO-CONTINUE-TIMEOUT expires. If no bits are set, no override action is taken (the printer will continue to wait). The action performed by the CONTINUE object being set to eInitiateAction or the Select key being pressed on the control panel may cause different actions. See the CONTINUE object description for information on the actions that occur for those conditions.
outbin10	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.10
OCT outbin10_override_mode	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.10.9	OCTET STRING	read-write	Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores the attention condition and continues printing. cBinderAttentionOverride - The device ignores the binder attention condition and continues printing. Additional information: See OUTBIN3-OVERRIDE-MODE.
INT outbin10_phd	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.10.11	INTEGER	read-only	Provides the number of the Paper Handling Device that contains this output bin.
outbin11	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.11
OCT outbin11_override_mode	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.11.9	OCTET STRING	read-write	Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores the attention condition and continues printing. cBinderAttentionOverride - The device ignores the binder attention condition and continues printing. Additional information: See OUTBIN3-OVERRIDE-MODE.
INT outbin11_phd	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.11.11	INTEGER	read-only	Provides the number of the Paper Handling Device that contains this output bin.
outbin3	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.3
OCT outbin3_override_mode	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.3.9	OCTET STRING	read-write	Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores the attention condition and continues printing. cBinderAttentionOverride - The device ignores the binder attention condition and continues printing. Additional information: If cCancelJob is set, the current print job will be cancelled regardless of other item settings. This object describes the action that is performed when the JOB-OUTPUT-AUTO-CONTINUE-TIMEOUT expires. The action performed by the CONTINUE object being set to eInitiateAction or the Select key being pressed on the control panel may cause different actions. See the CONTINUE object description for information on the actions that occur for those conditions.
INT outbin3_phd	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.3.11	INTEGER	read-only	Provides the number of the Paper Handling Device that contains this output bin.
outbin4	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.4
OCT outbin4_override_mode	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.4.9	OCTET STRING	read-write	Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores the attention condition and continues printing. cBinderAttentionOverride - The device ignores the binder attention condition and continues printing. Additional information: See OUTBIN3-OVERRIDE-MODE.
INT outbin4_phd	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.4.11	INTEGER	read-only	Provides the number of the Paper Handling Device that contains this output bin.
outbin5	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.5
OCT outbin5_override_mode	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.5.9	OCTET STRING	read-write	Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores the attention condition and continues printing. cBinderAttentionOverride - The device ignores the binder attention condition and continues printing. Additional information: See OUTBIN3-OVERRIDE-MODE.
INT outbin5_phd	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.5.11	INTEGER	read-only	Provides the number of the Paper Handling Device that contains this output bin.
outbin6	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.6
OCT outbin6_override_mode	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.6.9	OCTET STRING	read-write	Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores the attention condition and continues printing. cBinderAttentionOverride - The device ignores the binder attention condition and continues printing. Additional information: See OUTBIN3-OVERRIDE-MODE.
INT outbin6_phd	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.6.11	INTEGER	read-only	Provides the number of the Paper Handling Device that contains this output bin.
outbin7	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.7
OCT outbin7_override_mode	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.7.9	OCTET STRING	read-write	Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores the attention condition and continues printing. cBinderAttentionOverride - The device ignores the binder attention condition and continues printing. Additional information: See OUTBIN3-OVERRIDE-MODE.
INT outbin7_phd	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.7.11	INTEGER	read-only	Provides the number of the Paper Handling Device that contains this output bin.
outbin8	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.8
OCT outbin8_override_mode	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.8.9	OCTET STRING	read-write	Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores the attention condition and continues printing. cBinderAttentionOverride - The device ignores the binder attention condition and continues printing. Additional information: See OUTBIN3-OVERRIDE-MODE.
INT outbin8_phd	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.8.11	INTEGER	read-only	Provides the number of the Paper Handling Device that contains this output bin.
outbin9	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.9
OCT outbin9_override_mode	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.9.9	OCTET STRING	read-write	Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores the attention condition and continues printing. cBinderAttentionOverride - The device ignores the binder attention condition and continues printing. Additional information: See OUTBIN3-OVERRIDE-MODE.
INT outbin9_phd	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.9.11	INTEGER	read-only	Provides the number of the Paper Handling Device that contains this output bin.
outbins	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3
INT overflow_bin	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.1.4	INTEGER	read-write	Returns or sets the bin that will be used for additional sheets of media when the current bin is full and printing is allowed to continue. Additional information: If this object is set to zero, overflowing to another bin is not allowed.
STR override_media_name	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.2	DisplayString	read-write	Sets a string identifying the media name that is to be used in place of the currently requested media. The substitution will continue until another media is selected. If set to a named media that is not currently available the requested media is not overridden. Additional information: When a request is received to print on a size and type of media that is not currently available, this object contains the desired media name as set by the print job. This object should be set to a media name that is currently available in the printer. If a paper mount request is not pending, attempting to get or set this object will cause to be returned. Setting this object to a string other than one of the MEDIAn-NAME objects (MEDIA-NAMES-AVAILABLE is applied) will cause a status of to be returned.
INT override_media_size	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.3	INTEGER	read-write	Sets the media size that is to be used in place of the currently requested media size. Additional information: When a request is received to print on a size and type of media that is not currently available, this object contains the desired size as set by the print job. This object should be set to a media size that is currently available to the printer. If a paper mount request is not pending, attempting to get or set this object will cause to be returned.
INT pcl_default_font_height	1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.13	INTEGER	read-write	Returns or changes the default PCL height. Height is an approximate measure of the body of the type in centipoints. A centipoint is 1/7200 inch. Height applies only to proportional fonts. Point size, in points, can be converted to font height, in centipoints, by multiplying the point size by 100. The POS indicates the supported values. An unsupported value causes the printer to use the closest supported value, causing the printer to return .''Closest'' means the smallest absolute difference. Additional information: Setting to an unsupported value causes the printer to substitute in a snap value and to return status. The snap values are as follow: =99975 snaps to 99975 Unsupported values in the range 400 to 99975 snaps DOWN to the previous supported value (i.e 25293 snaps to 25275 or 75038 snaps to 75025).
INT pcl_default_font_number	1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.15	INTEGER	read-write	Returns or changes the value of the default font number variable in NVRAM. Writing an unsupported value causes the printer to generate an .
INT pcl_default_font_source	1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.14	INTEGER	read-write	Returns or changes the value of the default font source variable in NVRAM.
INT pcl_default_font_width	1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.16	INTEGER	read-write	Returns or changes the default PCL font width. Width is expressed as the width of a character in centipoints. A centipoint is 1/7200 inch. Width applies only to fixed space fonts. Pitch, in character per inch, can be converted to font width, in centipoints, by dividing 7200 by the pitch. The POS indicates the supported values. An unsupported value causes the printer to use the closest supported value, causing the printer to return . ''Closest'' means the smallest absolute difference. Additional information: Setting to an unsupported value causes the printer to substitute in a snap value (listed below) and to return status. The snap values are as follow: =9999 snaps to 9999
INT pcl_resource_saving_memory_size	1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.2	INTEGER	read-write	Returns or changes the amount of resource saving memory set aside to hold permanent soft PCL resources. Additional information: The value returned by this object is the amount of Resource Saving memory currently dedicated to PCL, regardless of the value of RESOURCE-SAVING. For a PCL-only printer, the value of this object is zero. All memory is dedicated to PCL, but it is not shown as such. If PostScript is installed without a duplex unit, the default value of this object is as follows: Zero if returned. If an unsupported value greater than 409600 is received, it will be snapped down to the nearest 102400 value and a status of returned. Attempting to set this object when RESOURCE-SAVING is eAuto or eOff will cause a status of to be returned.
INT pcl_total_page_count	1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.5	INTEGER	read-only	Total number of PCL pages printed by the device. Additional information: In LaserJet 5Si the PCL page count is kept in NVRAM however the NVRAM value is only updated every 10 pages. NOTE: The value returned by this OID will be incremented every page but if power is lost between NVRAM updates, up to 9 pages of the page count may be lost. The page count counter will be reset to zero after 16,777,215 (2^24-1) pages. The page count is incremented when a sheet of media is pulled from an input tray. A duplex printed sheet will cause this counter to be incremented by two.
pdl	1.3.6.1.4.1.11.2.3.9.4.2.1.3.3
pdl_pcl	1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3
pdl_postscript	1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4
ph	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.7
ph_devices	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.7.3
ph2	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.7.3.2
ph3	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.7.3.3
phd	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5
phd1	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.1
INT phd1_capacity	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.1.4	INTEGER	read-only	Returns an indication of the capacity of the installed option. See SIMM1-CAPACITY for an explanation of the meaning of the value of this object. Additional information: The LaserJet 5Si high capacity envelope feeder has a single tray.
STR phd1_manufacturing_info	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.1.2	DisplayString	read-only	Returns information describing the manufacture of this particular PHD. May include serial number and firmware revision.
STR phd1_model	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.1.1	DisplayString	read-only	Returns product information identifying the PHD device. Example: XXXX
INT phd1_type	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.1.3	INTEGER	read-only	Returns an indication of the type of option installed in this particular SIMM interface See SIMM1-TYPE for an explanation of the enumerations. Additional information: Returns an indication of whether or not the high capacity envelope feeder is installed on the printer. A value of eEmpty means that the envelope feeder is not installed.
phd2	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.2
INT phd2_capacity	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.2.4	INTEGER	read-only	Returns an indication of the capacity of the installed option. See SIMM1-CAPACITY for an explanation of the meaning of the value of this object. Additional information: The LaserJet 5Si high capacity input device has a single tray.
OCT phd2_device_memory	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.7.3.2.4	OCTET STRING	read-only	This object is used to read the current values stored in shared memory available from the paper handling device. Additional information: This object returns the 16 bytes of NVRAM data that the formatter saves for the paper handling device. For the HCI, the data is meaningless.
STR phd2_manufacturing_info	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.2.2	DisplayString	read-only	Returns information describing the manufacture of PHD 2. May include serial number and firmware revision.
STR phd2_model	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.2.1	DisplayString	read-only	Returns product information identifying PHD device 2. Example: XXXX
INT phd2_type	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.2.3	INTEGER	read-only	Returns an indication of the type of option installed in PHD interface 2. See SIMM1-TYPE for an explanation of the enumerations. Additional information: External paper handling devices are connected to the printer in a daisy-chained fashion. PHD2 refers to the first device that is connected. Returns eEmpty if no paper handling devices are installed. If the HCI is attached, the value will be eInputPHD. If the HCO is the first connected device, the value will be eOutputPHD.
phd3	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.3
INT phd3_capacity	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.3.4	INTEGER	read-only	Returns an indication of the capacity of the installed option. See SIMM1-CAPACITY for an explanation of the meaning of the value of this object. Additional information: This is the number of logical bins provided by the device.
OCT phd3_device_memory	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.7.3.3.4	OCTET STRING	read-only	This object is used to read the current values stored in shared memory available from the paper handling device. Additional information: This object returns the 16 bytes of NVRAM data that the formatter saves for the paper handling device. For Tlatoani, the data includes the current mode of the device. The format is as follows: Byte 1: Always 1 Byte 2: HCO Mode (see PHD3-DEVICE-SPECIFIC-COMMAND) Byte 3: Sum of bytes 1 and 2
OCT phd3_device_specific_command	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.7.3.3.2	OCTET STRING	write-only	This object is used to send device-specific data to the paper handling device. The meaning of the device- specific command is dependent on the paper handling device and must be specified in the POS. If the paper handling device does not accept the command, then an will be returned. If the device accepts the command, it may still be processing the command after the response has been returned. Depending on the device, the application may need to query PHDx-DEVICE-MEMORY to see when the command has completed. Additional information: For Tlatoani, the device-specific binary strings that may be sent to the paper handling device are described below. The value returned in reponse to the set request is the HCO mode (note that it is the current mode, which is not necessarily the same as the mode just set). The format of the response is the same as the command format, including the command byte. The general format of the binary string is: . The current HCO implementation does not require any . BYTE 1 is Command {Valid value: 1 .. 2} 1 = Set HCO Mode 2 = Return HCO Mode BYTE 2 is Set HCO Mode Option {Valid values: 1 .. 4} 1 = Stacker 2 = Separator 3 = Collator > 4 = Mailbox Mailbox 1 is the TOP mailbox. Example for setting the mode: BYTE number: 1 2 1 1 Set mode to Stacker. 1 2 Set mode to Separator. 1 4 Set mode to Mailbox. Example for getting the current mode: BYTE number: 1 2 2 0 Command to return the mode. 2 1 Current mode is Stacker. 2 2 Current mode is Separator. 2 4 Current mode is Mailbox.
STR phd3_manufacturing_info	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.3.2	DisplayString	read-only	Returns information describing the manufacture of PHD 3. May include serial number and firmware revision.
STR phd3_model	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.3.1	DisplayString	read-only	Returns product information identifying PHD device 3. Additional information: The value returned by Tlatoani depends on the current mode of the device. The possible values are as follows: MULTIBIN MAILBOX C3764A MULTIBIN STACKER C3764A MULTIBIN SEPARATOR C3764A.
INT phd3_type	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.3.3	INTEGER	read-only	Returns an indication of the type of option installed in PHD interface 3. See SIMM1-TYPE for an explanation of the enumerations. Additional information: External paper handling devices are connected to the printer in a daisy-chained fashion. PHD3 refers to the second device that is connected. Returns eEmpty if only one paper handling device is installed. If the HCO is attached (second on the chain), the value will be eOutputPHD. If the HCI is the second connected device, the value will be eInputPHD.
phd4	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.4
INT phd4_type	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.4.3	INTEGER	read-only	Returns an indication of the type of option installed in PHD interface 4. See SIMM1-TYPE for an explanation of the enumerations. Additional information: External paper handling devices are connected to the printer in a daisy-chained fashion. PHD4 refers to the third device that is connected. Returns eEmpty if only two paper handling devices are installed. At introduction, there is no planned configuration that would cause the value of this object to be anything other than eEmpty.
phd5	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.5
INT phd5_type	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.5.3	INTEGER	read-only	Returns an indication of the type of option installed in PHD interface 5. See SIMM1-TYPE for an explanation of the enumerations. Additional information: External paper handling devices are connected to the printer in a daisy-chained fashion. PHD5 refers to the fourth device that is connected. Returns eEmpty if only three paper handling devices are installed. At introduction, there is no planned configuration that would cause the value of this object to be anything other than eEmpty.
phd6	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.6
INT phd6_type	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.6.3	INTEGER	read-only	Returns an indication of the type of option installed in PHD interface 6. See SIMM1-TYPE for an explanation of the enumerations. Additional information: External paper handling devices are connected to the printer in a daisy-chained fashion. PHD6 refers to the fifth device that is connected. Returns eEmpty if only three paper handling devices are installed. At introduction, there is no planned configuration that would cause the value of this object to be anything other than eEmpty.
pjl	1.3.6.1.4.1.11.2.3.9.4.2.1.3.5
INT pjl_password	1.3.6.1.4.1.11.2.3.9.4.2.1.3.5.1	INTEGER	read-only	Returns PJL password, if the password is not set (zero). If the password is set, then attempting to retrieve the password causes an to occur and will return the .
port1	1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.3.1
INT port1_parallel_bidirectionality	1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.3.1.5	INTEGER	read-write	Returns or changes whether the parallel I/O port supports bidirectional communication for port 1. This object is only supported if this port is a parallel port. Additional information: A get on this object returns the current mode for the parallel port. Setting this object specifies whether or not bidirectional communications will be allowed.
INT port1_parallel_speed	1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.3.1.4	INTEGER	read-write	Returns or changes the maximum parallel I/O port speed, for port 1. This object is only supported if this port is a parallel port. An eSlow setting causes a 10 us busy pulse per received byte of data. An eFast setting causes a 1.5 us busy pulse per received byte of data. In rare cases, setting this value to eFast can cause the parallel port to no longer transfer data reliably.
ports	1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.3
INT postscript_jam_recovery	1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4.12	INTEGER	read-write	Returns or changes the PostScript jam recovery setting. If eOn, then the device will reprint PostScript pages, if those pages jam. Additional information: This object is only supported if PostScript option is installed.
INT postscript_print_errors	1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4.11	INTEGER	read-write	Returns or changes the value of the print PostScript errors setting. If eOn, PostScript prints an error page showing the error encountered and the stack at the time of the error. Additional information: This object is only supported if PostScript option is installed.
INT postscript_resource_saving_memory_size	1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4.2	INTEGER	read-write	Returns or changes the amount of resource saving memory set aside to hold permanent soft PostScript resources. Additional information: The value returned by this object is the amount of Resource Saving memory currently dedicated to PostScript, regardless of the value of RESOURCE-SAVING. If PostScript is installed without a duplex unit, the default value of this object is as follows: Zero if returned. If an unsupported value greater than 409600 is received, it will be snapped down to the nearest 102400 value and a status of returned. Attempting to set this object when RESOURCE-SAVING is eAuto or eOff will cause a status of to be returned.
INT postscript_total_page_count	1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4.5	INTEGER	read-only	Total number of PostScript pages printed by the device. Additional information: This object is only supported if PostScript option is installed. In LaserJet 5Si the count is kept in NVRAM however the NVRAM value is only updated every 10 sheets. NOTE: The value returned by this OID will be incremented every sheet but if power is lost between NVRAM updates up to 9 sheets of the count may be lost. The counter will be reset to zero after 16,777,215 (2^24-1) pages.
INT print_density	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.5	INTEGER	read-write	Returns or sets the print density setting. Print density is the instantaneous amount of marking agent applied to the paper while printing. A value of zero has the lowest print density, yielding a lighter page. A value of 10 has the highest print density, yielding a darker page. Each POS should document what values in the 0 to 10 range are supported. Additional information: When this value is written, the page pipeline will be flushed (all pages being printed are completed, no new ones are started), the new density setting is set and printing resumes. The actual change in print density may be gradual over several pages. The supported values are 1 through 5. Setting to an unsupported value causes the printer to substitute in a snap value and to return status. The snap values are as follow: 5 snaps to 5
print_engine	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1
INT print_internal_page	1.3.6.1.4.1.11.2.3.9.4.2.1.1.5.2	INTEGER	read-write	Writing this object to a value other than eNotPrintingAnInternalPage causes the device to attempt to print an internally generated page. Reading this object provides an indication what internally generated page is currently being printed, if any. The actual page is device specific. Some devices may support continuously printing an internally generated page. Setting this object to eNotPrintingAnInternalPage terminates continuously printing internally generated pages. An internally generated page may not be allowed to be printed at any arbitrary time; under what conditions it will succeed or fail is device specific. If the device supports the requested page, but can not start printing the page when requested, the device will respond with . RECOMMENDATION: If the device is ready (i.e. the NOT- READY-PRINTER object does not contain any items, except maybe being off-line) and is idle (i.e. the NOT-IDLE object does not contain any items), this request should always succeed. This provides a mechanism for driver writers to always determine if the action will succeed or not. Additional information: eDeviceDemoPage2 is the printer demo page. ePCLFontList1 is the PCL typeface list. eDeviceDemoPage5ErrorLog is the printer's error log. LaserJet 5Si does not support continuously printing a demo page. The value eDeviceDemoPage6FileSystemDirectoryListing can only be set when the disk option is installed; values ePostScriptDemoPage1ConfigurationPage and ePostScriptFontList1 can be set only when PostScript is installed. Attempting to set these values without the proper option installed will result in a status of being returned. The printer must be idle before it will print an internal page. The best method to assure that the printer is idle is to set the object ON-OFF-LINE to eOfflineAtEndOfJob, wait for the printer to be offline and then print the internal page. The printer will put itself online to print the page. When this object is set to a valid value and the printer is idle, the status returned is and the value returned is ePrintingAnUnknownInternalPage. If the printer is not idle (whether printing an external job, printing an internal page or executing a self test), a status of status will be returned with a value of eNotPrintingAnInternalPage. Setting this object to a valid value causes the desired page to be formatted and put in the printer's print queue. While the page is being formatted a get on this object will return the value ePrintingAnUnknownInternalPage, if the time to format the page is long enough (it is currently estimated that the time to format some pages is as short as one millisecond). Attempting to set this object before the page has completed being formatted and printed will cause status to be returned with a value of eNotPrintingAnInternalPage. After the page is in the queue, a get on this object will return a value of eNotPrintingAnInternalPage. Setting this object to cause another page to be printed before the first page has completed results in a status of status with a value of eNotPrintingAnInternalPage. Likewise, if the SELF-TEST object is set to eNonDestructiveSelfTest and that page has not printed when this object is set to print a page, a status of status with a value of eNotPrintingAnInternalPage will be returned until the self test page has printed.
print_media	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8
printmib	1.3.6.1.4.1.11.2.3.9.4.2.2
processing_subsystem	1.3.6.1.4.1.11.2.3.9.4.2.1.3
prtAlert	1.3.6.1.4.1.11.2.3.9.4.2.2.18
INT prtalertcode	1.3.6.1.4.1.11.2.3.9.4.2.2.18.1.1.7	INTEGER	read-only	The code that describes the type of alert for this entry in the table. There are different codes for each sub-unit type: for example, Media Supply Low and Media Supply Empty are Aler codes for the Input sub-unit.
OCT prtalertdescription	1.3.6.1.4.1.11.2.3.9.4.2.2.18.1.1.8	OCTET STRING	read-only	A description of this alert entry in the localization specified by prtGeneralCurrentLocalization. The description is provided by the printer to further elaborate on the enumerated alert or provide information in the case where the code is classified ask `other' or `unknown'. The printer is required to return a description string but the string may be a null string.
prtAlertEntry	1.3.6.1.4.1.11.2.3.9.4.2.2.18.1.1
INT prtalertgroup	1.3.6.1.4.1.11.2.3.9.4.2.2.18.1.1.4	INTEGER	read-only	The type of sub-unit within the printer model that this alert is related. Input, output, and markers are examples of printer model groups, i.e., examples of types of sub-units. Whereever possible, these enumerations match the sub-identifier that identifies the relevant table in the printmib.
INT prtalertgroupindex	1.3.6.1.4.1.11.2.3.9.4.2.2.18.1.1.5	INTEGER	read-only	An index of the row within the principle table in the group identified by prtAlertGroup that represents the sub-unit of the printer that caused this alert. The combination of the Group and the GroupIndex defines exactly which printer sub-unit caused the alert.; for example, Input #3, Output #2, and Marker #1. Every object in this MIB is indexed with hrDeviceIndex and optionally, another index variable. If this other index variable is present in the table that generated the alert, it will be used as the value for this object. Otherwise, this value shall be -1.
INT prtalertlocation	1.3.6.1.4.1.11.2.3.9.4.2.2.18.1.1.6	INTEGER	read-only	The sub-unit location that is defined by the printer manufacturer to further refine the location of this alert within the designated sub-unit. The location is used in conjunction with the Group and GroupIndex values; for example, there is an alert in Input #2 at location number 7.
INT prtalertseveritylevel	1.3.6.1.4.1.11.2.3.9.4.2.2.18.1.1.2	INTEGER	read-only	The level of severity of this alert table entry. The printer determines the severity level assigned to each entry into the table.
prtAlertTable	1.3.6.1.4.1.11.2.3.9.4.2.2.18.1
INT prtalerttraininglevel	1.3.6.1.4.1.11.2.3.9.4.2.2.18.1.1.3	INTEGER	read-only	The level of training required to handle this alert. The training level is an enumeration that is determined and assigned by the printer manufacturer based on the information or the training required to handle this alert. The printer will break alerts into these different training levels. It is the responsibility of the management application in the system to determine how a particular alert is handled and how and to whom that alert is routed. The following are the four training levels of alerts: Field Service - Alerts that typically require advanced training and technical knowledge of the printer and its sub-units. An example of a technical person would be a manufacture's Field Service representative, or other person formally trained by the manufacturer or similar representative. Trained - Alerts that require an intermediate or moderate level of knowledge of the printer and its sub-units. A typical examples of alerts that a trained operator can handle is replacing toner cartridges. Untrained - Alerts that can be fixed without prior training either because the action to correct the alert is obvious or the printer can help the untrained person fix the problem. A typical example of such an alert is reloading paper trays and emptying output bins on a low end printer. Management - Alerts that have to do with overall operation of and configuration of the printer. Examples of management events are configuration change of sub-units. Additional information: The value of this object depends on the alert condition as follows: ePuntrained: Paper low/out. ePtrained: Toner low. ePfieldService: Marker failure. ePmanagement: Configuration change.
prtChannel	1.3.6.1.4.1.11.2.3.9.4.2.2.14
INT prtchannelcurrentjobcntllangindex	1.3.6.1.4.1.11.2.3.9.4.2.2.14.1.1.4	INTEGER	read-only	The value of prtInterpreterIndex corresponding to the Control Language Interpreter for this channel. This interpreter defines the syntax used for control functions, such as querying or changing environment variables and identifying job boundaries (e.g. PJL, PostScript, NPAP). Must be 1 or greater. Additional information: This object points to the PJL language. It is read-only because PJL is the printer's only job control language. It is the same for all channels.
INT prtchanneldefaultpagedesclangindex	1.3.6.1.4.1.11.2.3.9.4.2.2.14.1.1.5	INTEGER	read-write	The value of prtInterpreterIndex corresponding to the Page Description Language Interpreter for this channel. This interpreter defines the default Page Description Language interpreter to be used for the print data unless the Control Language is used to select a specific interpreter (e.g., PCL, PostScript Language, auto-sense). Must be 1 or greater. Additional information: The default points to the automatic language switcher. If this object is changed for one channel, all channels will be changed.
prtChannelEntry	1.3.6.1.4.1.11.2.3.9.4.2.2.14.1.1
INT prtchannelifindex	1.3.6.1.4.1.11.2.3.9.4.2.2.14.1.1.7	INTEGER	read-only	The value of ifIndex (in the ifTable; see the interface section of MIB-2/RFC 1213) which corresponds to this channel. When more than one row of the ifTable is relevant, this is the index of the row representing the topmost layer in the interface hierarchy. A value of zero indicates that no interface is associated with this channel. Additional information: MIO-based channels provide their own values for this object.
OCT prtchannelprotocolversion	1.3.6.1.4.1.11.2.3.9.4.2.2.14.1.1.3	OCTET STRING	read-only	The version of the protocol used on this channel. The format used for version numbering depends on prtChannelType. Additional information: MIO-based channels provide their own values. The channel 1 value includes (separated by semi colons) different aspects of the spec: electrical;logical; and physical connector.
INT prtchannelstate	1.3.6.1.4.1.11.2.3.9.4.2.2.14.1.1.6	INTEGER	read-only	The state of this print data channel. The value determines whether control information and print data is allowed through this channel or not. Additional information: MIO-based channels provide their own values for this object. The base-printer's port always reports a value of ePprintDataAccepted. If the printer is offline, that is detected by reading the Host Resources General Printer Status objects, not by reading this object.
INT prtchannelstatus	1.3.6.1.4.1.11.2.3.9.4.2.2.14.1.1.8	INTEGER	read-only	The current status of the channel. The status is an integer that is the sum of 5 distinct values, Availability, Non-Critical, Critical, On-line, and Transitioning. These values are: Availability value Available and Idle 0 000'b Available and Standby 2 010'b Available and Active 4 100'b Available and Busy 6 110'b Unavailable and OnRequest 1 001'b Unavailable because Broken 3 011'b Unknown 5 101'b Non-Critical No Non-Critical Alerts 0 Non-Critical Alerts 8 Critical No Critical Alerts 0 Critical Alerts 16 On-Line Intended state is On-Line 0 Intended state is Off-Line 32 Transitioning At intended state 0 Transitioning to intended state 64 Additional information: See SubUnitStatus in RFC1759 Printer MIB for details on values reported by this object. MIO-based channels provide their own values for this object. Status for LaserJet 5Si's parallel port will not include values Available and Standby (2), Available and Active (4), Non-Critical Alerts (8) or Transitioning to intended state (64).
prtChannelTable	1.3.6.1.4.1.11.2.3.9.4.2.2.14.1
INT prtchanneltype	1.3.6.1.4.1.11.2.3.9.4.2.2.14.1.1.2	INTEGER	read-only	The type of this print data channel. This object provides the linkage to ChannelType-specific groups that may (conceptually) extend the prtChannelTable with additional details about that channel. Additional information: MIO-based channels provide their own values.
INT prtconsolecolor	1.3.6.1.4.1.11.2.3.9.4.2.2.17.6.1.4	INTEGER	read-only	The color of this light.
OCT prtconsoledescription	1.3.6.1.4.1.11.2.3.9.4.2.2.17.6.1.5	OCTET STRING	read-only	The vendor description or label of this light in the localization specified by prtConsoleLocalization.
INT prtconsoledisable	1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.13	INTEGER	read-write	This object enables or disables manual input from the operators console. Additional information: If the object prtConsoleDisable has value 'disabled' then manual input is not accepted from the operator console. If the object prtConsoleDisable has the value 'enabled' then manual input is accepted from the operator console. Service Mode is not changed by this object.
prtConsoleDisplayBuffer	1.3.6.1.4.1.11.2.3.9.4.2.2.16
prtConsoleDisplayBufferEntry	1.3.6.1.4.1.11.2.3.9.4.2.2.16.5.1
prtConsoleDisplayBufferTable	1.3.6.1.4.1.11.2.3.9.4.2.2.16.5
OCT prtconsoledisplaybuffertext	1.3.6.1.4.1.11.2.3.9.4.2.2.16.5.1.2	OCTET STRING	read-write	The content of a line in the logical display buffer of the operator's console of the printer. When a write operation occurs, normally a critical message, to one of the LineText strings, the agent should make that line displayable if a physical display is present. Writing a zero length string clears the line. It is an implementation-specific matter as to whether the agent allows a line to be overwritten before it has been cleared. Printer generated strings shall be in the localization specified by ConsoleLocalization. Management Application generated strings should be localized by the Management Application. Additional information: This object does not have to be cleared before a new string is written; the new string immediately replaces the old one. When a 79 SERVICE message is displayed, it is not possible to write to this object.
prtConsoleLightEntry	1.3.6.1.4.1.11.2.3.9.4.2.2.17.6.1
prtConsoleLights	1.3.6.1.4.1.11.2.3.9.4.2.2.17
prtConsoleLightTable	1.3.6.1.4.1.11.2.3.9.4.2.2.17.6
INT prtconsolelocalization	1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.10	INTEGER	read-write	The value of the prtLocalizationIndex corresponding to the language, country, and character set to be used for the console. This localization applies both to the actual display on the console as well as the encoding of these console objects in management operations. Additional information: The value of this object is saved in NVRAM. If a localized string is currently being displayed on the control panel by the device, changing this object will cause the displayed string to be changed to its new value. If this object is changed while the printer is processing a page that contains localized strings has started, the results are undefined.
INT prtconsolenumberofdisplaychars	1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.12	INTEGER	read-only	The number of characters per line displayed on the physical display. This value is 0 if there are no lines on the physical display or if there is no physical display.
INT prtconsolenumberofdisplaylines	1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.11	INTEGER	read-only	The number of lines on the printer's physical display. This value is 0 if there are no lines on the physical display or if there is no physical display.
INT prtconsoleofftime	1.3.6.1.4.1.11.2.3.9.4.2.2.17.6.1.3	INTEGER	read-only	The off time in milliseconds of blinking of this light; 0 indicates on always. If both prtConsoleOnTime and prtConsoleOffTime are 0, then the light is always off. Additional information: There are three control panel LED's: Online ( index 1), Data ( index 2) and Attention ( index 3). When an LED blinks, it is typically on for one half second and off for one half second; the value used for this object is 500 when the LED is blinking, otherwise it is zero.
INT prtconsoleontime	1.3.6.1.4.1.11.2.3.9.4.2.2.17.6.1.2	INTEGER	read-only	The on time in milliseconds of blinking of this light; 0 indicates off always. If both prtConsoleOnTime and prtConsoleOffTime are 0, then the light is always off. Additional information: There are three control panel LED's: Online ( index 1), Data ( index 2) and Attention ( index 3). When an LED blinks, it is typically on for one half second and off for one half second; the value used for this object is 500 whether the LED is on or blinking.
prtCover	1.3.6.1.4.1.11.2.3.9.4.2.2.6
OCT prtcoverdescription	1.3.6.1.4.1.11.2.3.9.4.2.2.6.1.1.2	OCTET STRING	read-only	The manufacturer provided cover sub-mechanism name in the localization specified by prtGeneralCurrentLocalization.
prtCoverEntry	1.3.6.1.4.1.11.2.3.9.4.2.2.6.1.1
INT prtcoverstatus	1.3.6.1.4.1.11.2.3.9.4.2.2.6.1.1.3	INTEGER	read-only	The status of this cover sub-unit. Additional information: LaserJet 5Si detects a door open condition only when printing.
prtCoverTable	1.3.6.1.4.1.11.2.3.9.4.2.2.6.1
prtDeviceRefEntry	1.3.6.1.4.1.11.2.3.9.4.2.2.5.3.1
INT prtdevicerefindex	1.3.6.1.4.1.11.2.3.9.4.2.2.5.3.1.2	INTEGER	read-only	The value of the hrDeviceIndex of the printer device that this deviceEntry is associated with.
prtDeviceRefTable	1.3.6.1.4.1.11.2.3.9.4.2.2.5.3
prtGeneral	1.3.6.1.4.1.11.2.3.9.4.2.2.5
INT prtgeneralconfigchanges	1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.1	INTEGER	read-only	Counts configuration changes that change the capabilities of a printer, such as the addition/deletion of input/output bins, the addition/deletion of interpreters, or changes in media size. Such changes will often affect the capability of the printer to service certain types of print jobs. Management applications may cache infrequently changed configuration information about sub-units on the printer. This object should be incremented whenever the agent wishes such applications to invalidate that cache and re-download all of this configuration information, thereby signalling a change in the printer's configuration. For example, if an input tray that contained paper of different dimensions was added, this counter would be incremented. As an additional example, this counter would not be incremented when an input tray is removed or the level of an input device changes. Additional information: This is a 32 bit counter (unsigned). When it reaches its maximum value, it will roll to zero. This object is stored in NVRAM.
INT prtgeneralcurrentlocalization	1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.2	INTEGER	read-write	The value of the prtLocalizationIndex corresponding to the current language, country, and character set to be used for localized string values that are identified as being dependent on the value of this object. Note that this object does not apply to localized strings in the prtConsole group or any object that is not identified as above. Additional information: The value of this object is saved in NVRAM.
OCT prtgeneralcurrentoperator	1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.4	OCTET STRING	read-write	The name of the current human operator responsible for operating this printer. It is suggested that this string include information that would enable other humans to reach the operator, such as a phone number. Additional information: The maximum supported string length is 32 characters. If the user entered string is too long, the device will store as much as possible and will return the status. This object is saved in NVRAM.
prtGeneralEntry	1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1
INT prtgeneralreset	1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.3	INTEGER	read-write	Setting this value to `powerCycleReset', `resetToNVRAM', or `resetToFactoryDefaults' will result in the resetting of the printer. When read, this object will always have the value `notResetting(3)', and a SET of the value `notResetting' shall have no effect on the printer. Some of the defined values are optional. However, every implementation must support at least the values `notResetting' and resetToNVRAM'. Additional information: All resets follow the same sequence of events except that a a value of ePresetToFactoryDefaults first makes a call to reset the NVRAM to factory defaults. Then, the following sequence of events occur: 1. A 1 second delay is initiated while a reply is returned to the requestor indicating OK. The printer waits for the second to elapse. 2. The printer goes off-line. 3. The control panel is disabled. 4. The paper path is flushed. 5. The printer is reset per the request. The printer will respond to PML requests up to this point in time. Setting this object to ePpowerCycleReset causes LaserJet 5Si to perform its power on initialization routines. I/O cards are reset (NVRAM on the cards is not changed; all I/O buffers are flushed). The tests normally run at power on time are executed. Setting this object to ePresetToNVRAM causes the printer to reset itself to its power on state without doing its normal power on testing. The I/O cards are not reset and I/O buffers remain intact. Setting this object to ePresetToFactoryDefaults causes the same action as a Cold Reset operation performed at the control panel (except power on testing is not performed). The I/O cards are not reset and I/O buffers remain intact.
OCT prtgeneralserviceperson	1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.5	OCTET STRING	read-write	The name of the last human responsible for servicing this printer. It is suggested that this string include information that would enable other humans to reach the service person, such as a phone number. Additional information: The maximum supported string length is 32 characters. If the user entered string is too long, the device will store as much as possible and will return the status. This object is saved in NVRAM.
prtGeneralTable	1.3.6.1.4.1.11.2.3.9.4.2.2.5.1
prtInput	1.3.6.1.4.1.11.2.3.9.4.2.2.8
INT prtinputcapacityunit	1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.8	INTEGER	read-only	The unit of measurement for use in calculating and relaying capacity values for this input sub-unit. Additional information: A sheet is a single piece of 20 pound paper. For tray 4, the envelope feeder, a sheet is one envelope.
INT prtinputcurrentlevel	1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.10	INTEGER	read-only	The current capacity of the input sub-unit in input sub-unit capacity units (CapacityUnit). If this input sub-unit can reliably sense this value, the value is sensed by the printer and may not be changed by management requests; otherwise, the value may be written (by a Remote Contol Panel or a Management Application). The value (-1) means other and specifically indicates that the sub-unit places no restrictions on this parameter. The value (-2) means unknown. The value (-3) means that the printer knows that at least one unit remains. Additional information: For trays 1 and 4, LaserJet 5Si can only detect empty/not empty trays. It returns -3 for not empty and 0 for empty. For trays 2 and 3, LaserJet 5Si can detect approximately the amount of media. The value returned is based on the amount detected as follows: 0 - empty 1 - 1-110 sheets 50 - 50-260 sheets 200 - 200-490 sheets 430 - 430 sheets or more For tray 5, LaserJet 5Si can detect approximately the amount of media. The value returned is based on the amount detected as follows: 0 - empty 1 - 1 sheet to 25% of capacity 500 - 26% to 50% of capacity 1000 - 51% to 75% of capacity 1500 - 76% to 100% of capacity If the tray drawer is open, a value of -2 (unknown) will be returned.
INT prtinputdefaultindex	1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.6	INTEGER	read-only	The value of prtInputIndex corresponding to the default input sub-unit: that is, this object selects the default source of input media. Additional information: The default input tray is determined by the printer based on DEFAULT-MEDIA-SIZE and DEFAULT-MEDIA-NAME. If multiple trays have qualifying media, tray 1 is selected first, then the non-empty tray with the highest capacity is selected; trays of equal capacity are selected by lower tray number. Trays 1-3 refer to the printer's trays that are so labeled. Tray 4 is the envelope feeder, which may or may not be present. Tray 5 is the first tray of the first external input paper handling device.
OCT prtinputdescription	1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.18	OCTET STRING	read-only	A free-form text description of this input sub-unit in the localization specified by prtGeneralCurrentLocalization.
INT prtinputdimunit	1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.3	INTEGER	read-only	The unit of measurement for use calculating and relaying dimensional values for this input sub-unit.
prtInputEntry	1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1
INT prtinputmaxcapacity	1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.9	INTEGER	read-only	The maximum capacity of the input sub-unit in input sub-unit capacity units (CapacityUnit). There is no convention associated with the media itself so this value reflects claimed capacity. If this input sub-unit can reliably sense this value, the value is sensed by the printer and may not be changed by management requests; otherwise, the value may be written (by a Remote Contol Panel or a Management Application). The value (-1) means other and specifically indicates that the sub-unit places no restrictions on this parameter. The value (-2) means unknown.
INT prtinputmediadimfeeddirchosen	1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.6	INTEGER	read-only	The printer will act as if media of the chosen dimension (in the feed direction) is present in this input source. Note that this value will be used even if the input tray is empty. Feed dimension measurements are taken parallel relative to the feed direction associated with that sub-unit and are in input sub-unit dimensional units (DimUnit). If the printer supports the declared dimension, the granted dimension is the same as the declared dimension. If not, the granted dimension is set to the closest dimension that the printer supports when the declared dimension is set. The value (-1) means other and specifically indicates that this sub-unit places no restriction on this parameter. The value (-2) indicates unknown. Additional information: The objects for trays 2, 3 and 5 reflect the configuration of the corresponding drawers. When the drawer is open, a value of -2 is returned. The default values assume the trays are configured for letter size paper. The object for trays 1 and 4 return the value of the media size for which the tray is currently configured.
INT prtinputmediadimfeeddirdeclared	1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.4	INTEGER	read-write	This object provides the value of the declared dimension, in the feed direction, of the media that is (or, if empty, was or will be) in this input sub-unit. The feed direction is the direction in which the media is fed on this sub-unit. This dimension is measured in input sub-unit dimensional units (prtInputDimUnit). If this input sub-unit can reliably sense this value, the value is sensed by the printer and may not be changed by management requests. Otherwise, the value may be changed. The value (-1) means other and specifically means that this sub-unit places no restriction on this parameter. The value (-2) indicates unknown. Additional information: For trays 2, 3 and 5 (which can reliably sense this value) the objects behave exactly the same as prtInputMediaDimFeedDirChosen. Attempting to set this object for trays 2, 3 and 5 will cause to be returned. The default values assume the trays are configured for letter size paper. For tray 1 the value is the dimension for the media size currently declared.
INT prtinputmediadimxfeeddirchosen	1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.7	INTEGER	read-only	The printer will act as if media of the chosen dimension (in the cross feed direction) is present in this input source. Note that this value will be used even if the input tray is empty. The cross feed direction is ninety degrees relative to the feed direction associated with this sub-unit. This dimension is measured in input sub-unit dimensional units (DimUnit). If the printer supports the declared dimension, the granted dimension is the same as the declared dimension. If not, the granted dimension is set to the closest dimension that the printer supports when the declared dimension is set. The value (-1) means other and specifically indicates that this sub-unit places no restriction on this parameter. The value (-2) indicates unknown. Additional information: The objects for trays 2, 3 and 5 reflect the configuration of the corresponding drawers. When the drawer is open, a value of -2 is returned. The default values assume the trays are configured for letter size paper. The object for trays 1 and 4 return the value of the media size for which the tray is currently configured.
INT prtinputmediadimxfeeddirdeclared	1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.5	INTEGER	read-write	This object provides the value of the declared dimension, in the cross feed direction, of the media that is (or, if empty, was or will be) in this input sub-unit. The cross feed direction is ninety degrees relative to the feed direction associated with this sub-unit. This dimension is measured in input sub-unit dimensional units (prtInputDimUnit). If this input sub-unit can reliably sense this value, the value is sensed by the printer and may not be changed by management requests. Otherwise, the value may be changed. The value (-1) means other and specifically means that this sub-unit places no restriction on this parameter. The value (-2) indicates unknown. Additional information: For trays 2, 3 and 5 (which can reliably sense this value) the objects behave exactly the same as prtInputMediaDimFeedDirChosen. Attempting to set this object for trays 2, 3 and 5 will cause to be returned. The default values assume the trays are configured for letter size paper. For tray 1 the value is the dimension for the media size currently declared.
OCT prtinputmedianame	1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.12	OCTET STRING	read-write	A description of the media contained in this input sub-unit; This description is intended for display to a human operator. This description is not processed by the printer. It is used to provide information not expressible in terms of the other media attributes (e.g. prtInputMediaDimFeedDirChosen, prtInputMediaDimXFeedDirChosen, prtInputMediaWeight, prtInputMediaType). An example would be `legal tender bond paper'. Additional information: If set to a string other than one contained by a MEDIAn-NAME object, a status of is returned.
OCT prtinputmodel	1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.15	OCTET STRING	read-only	The model name of this input sub-unit.
OCT prtinputname	1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.13	OCTET STRING	read-only	The name assigned to this input sub-unit.
INT prtinputsecurity	1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.19	INTEGER	read-only	Indicates if this input sub-unit has some security associated with it. Additional information: No security mechanism provided.
OCT prtinputserialnumber	1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.17	OCTET STRING	read-only	The serial number assigned to this input sub-unit.
INT prtinputstatus	1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.11	INTEGER	read-only	The current status of this input sub-unit. The status is an integer that is the sum of 5 distinct values, Availability, Non-Critical, Critical, On-line, and Transitioning. These values are: Availability value Available and Idle 0 000'b Available and Standby 2 010'b Available and Active 4 100'b Available and Busy 6 110'b Unavailable and OnRequest 1 001'b Unavailable because Broken 3 011'b Unknown 5 101'b Non-Critical No Non-Critical Alerts 0 Non-Critical Alerts 8 Critical No Critical Alerts 0 Critical Alerts 16 On-Line Intended state is On-Line 0 Intended state is Off-Line 32 Transitioning At intended state 0 Transitioning to intended state 64 Additional information: See SubUnitStatus in RFC1759 Printer MIB for details on values reported by this object. LaserJet 5Si will not include values Available and Standby (2), Available and Active (4) or Unknown (5).
prtInputTable	1.3.6.1.4.1.11.2.3.9.4.2.2.8.2
INT prtinputtype	1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.2	INTEGER	read-only	The type of technology (discriminated primarily according to feeder mechanism type) employed by the input sub-unit. Note, the Optional Input Class provides for a descriptor field to further qualify the other choice. Additional information: Tray 1 is the right side tray and is always present. Tray 1 can operate in manual feed mode but is typically treated as a normal input source. Therefore, its type is ePsheetFeedAutoNonRemovableTray. Trays 2 and 3 are the drawers and, although they are usually not removed from the printer, the printer cannot distinguish the open and removed conditions. Therefore, when they are open, they are considered to be removed and, for this object, they are considered to be of type ePsheetFeedAutoRemovableTray. Tray 4 is the envelope feeder, which is removable at any time. Tray 5 is the high capacity input device. .
OCT prtinputvendorname	1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.14	OCTET STRING	read-only	The vendor name of this input sub-unit.
OCT prtinputversion	1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.16	OCTET STRING	read-only	The version of this input sub-unit.
prtInterpreter	1.3.6.1.4.1.11.2.3.9.4.2.2.15
INT prtinterpreterdefaultcharsetin	1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.10	INTEGER	read-write	The default coded character set for input octets encountered outside a context in which the Page Description Language established the interpretation of the octets. This value shall be (2) if there is no default. Additional information: ePcsAdobeStandardEncoding is the same as PSText ( 10J). The object corresponding to PCL has read-write access; all others are read-only.
INT prtinterpreterdefaultcharsetout	1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.11	INTEGER	read-only	The default character set for data coming from this interpreter through the printer's output channel. This value shall be (2) if there is no default.
INT prtinterpreterdefaultorientation	1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.7	INTEGER	read-write	The current orientation default for this interpreter. This value may be overridden for a particular job (e.g., by a command in the input data stream). Additional information: Setting this object for one interpreter will change it for all installed interpreters. Interpreters 1, 2 and 4 ignore the value of this object.
OCT prtinterpreterdescription	1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.5	OCTET STRING	read-only	A string to identify this interpreter in the localization specified by prtGeneralCurrentLocalization as opposed to the language which is being interpreted. It is anticipated that this string will allow manufacturers to unambiguously identify their interpreters. Additional information: None of these strings are localized.
prtInterpreterEntry	1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1
INT prtinterpreterfeedaddressability	1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.8	INTEGER	read-only	The maximum interpreter addressability in the feed direction in 10000 prtMarkerAddressabilityUnit s (see prtMarkerAddressabilityFeedDir ) for this interpreter. The value (-1) means other and specifically indicates that the sub-unit places no restrictions on this parameter.
INT prtinterpreterlangfamily	1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.2	INTEGER	read-only	The family name of a Page Description Language (PDL) or control language which this interpreter in the printer can interpret or emulate. This type 2 list of enumerations requires review before additional entries are made. Additional information: Also provides a place to supply PJL information and overall ROM information ( by using the language switcher as a separate language).
OCT prtinterpreterlanglevel	1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.3	OCTET STRING	read-only	The level of the language which this interpreter is interpreting or emulating. This might contain a value like '5e' for an interpreter which is emulating level 5e of the PCL language. It might contain '2' for an interpreter which is emulating level 2 of the PostScript language. Similarly it might contain '2' for an interpreter which is emulating level 2 of the HPGL language.
OCT prtinterpreterlangversion	1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.4	OCTET STRING	read-only	The date code or version of the language which this interpreter is interpreting or emulating. Additional information: For PostScript, this is more detailed revision information.
prtInterpreterTable	1.3.6.1.4.1.11.2.3.9.4.2.2.15.1
INT prtinterpretertwoway	1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.12	INTEGER	read-only	Indicates whether or not this interpreter returns information back to the host.
OCT prtinterpreterversion	1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.6	OCTET STRING	read-only	The date code, version number, or other product specific information tied to this interpreter. This value is associated with the interpreter, rather than with the version of the language which is being interpreted or emulated. Additional information: Same as prtInterpreterLangVersion.
INT prtinterpreterxfeedaddressability	1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.9	INTEGER	read-only	The maximum interpreter addressability in the cross feed direction in 10000 prtMarkerAddressabilityUnit s (see prtMarkerAddressabilityXFeedDir) for this interpreter. The value (-1) means other and specifically indicates that the sub-unit places no restrictions on this parameter.
prtLocalization	1.3.6.1.4.1.11.2.3.9.4.2.2.7
INT prtlocalizationcharacterset	1.3.6.1.4.1.11.2.3.9.4.2.2.7.1.1.4	INTEGER	read-only	The coded character set used for this localization.
OCT prtlocalizationcountry	1.3.6.1.4.1.11.2.3.9.4.2.2.7.1.1.3	OCTET STRING	read-only	A two character country code from ISO 3166, a blank string (two space characters) shall indicate that the country is not defined. Examples: US, FR, DE, ... Additional information: The languages supported by LaserJet 5Si (and corresponding country) are English (United States), French (France), German (Germany), Italian (Italy), Spanish (Spain), Swedish (Sweden), Danish (Denmark), Norwegian (Norway), Dutch (Netherlands), Finnish (Finland), Portuguese (Portugal), Turkish (Turkey), Polish (Poland) and Japanese (Japan).
prtLocalizationEntry	1.3.6.1.4.1.11.2.3.9.4.2.2.7.1.1
OCT prtlocalizationlanguage	1.3.6.1.4.1.11.2.3.9.4.2.2.7.1.1.2	OCTET STRING	read-only	A two character language code from ISO 639. Examples EN, GB, CA, FR, DE. Additional information: The languages supported by LaserJet 5Si are English, French, German, Italian, Spanish, Swedish, Danish, Norwegian, Dutch, Finnish, Portuguese, Turkish, Polish and Japanese.
prtLocalizationTable	1.3.6.1.4.1.11.2.3.9.4.2.2.7.1
prtMarker	1.3.6.1.4.1.11.2.3.9.4.2.2.10
INT prtmarkeraddressabilityfeeddir	1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.9	INTEGER	read-only	The number of addressable marking positions in the feed direction per 10000 units of measure specified by AddressabilityUnit. A value of (-1) implies 'other' or 'infinite' while a value of (-2) implies 'unknown'.
INT prtmarkeraddressabilityunit	1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.8	INTEGER	read-only	The unit of measure of distances.
INT prtmarkeraddressabilityxfeeddir	1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.10	INTEGER	read-only	The number of addressable marking positions in the cross feed direction in 10000 units of measure specified by AddressabilityUnit. A value of (-1) implies 'other' or 'infinite' while a value of (-2) implies 'unknown'.
INT prtmarkercounterunit	1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.3	INTEGER	read-only	The unit that will be used by the printer when reporting counter values for this marking sub-unit. The time units of measure are provided for a device like a strip recorder that does not or cannot track the physical dimensions of the media and does not use characters, lines or sheets.
INT prtmarkerdefaultindex	1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.8	INTEGER	read-only	The value of prtMarkerIndex corresponding to the default markersub-unit; that is, this object selects the default marker.
INT prtmarkereastmargin	1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.14	INTEGER	read-only	The margin from the East edge (see NorthMargin) of the medium in units identified by AddressabilityUnit. Printing within the area bounded by all four margins is guaranteed for all interpreters. The value (-2) means unknown.
prtMarkerEntry	1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1
INT prtmarkerlifecount	1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.4	INTEGER	read-only	The count of the number of units of measure counted during the life of printer using units of measure as specified by CounterUnit. Additional information: In LaserJet 5Si the total engine page count is kept in NVRAM however the NVRAM value is only updated every 10 impressions. NOTE: The value returned by this OID will be incremented every page but if power is lost between NVRAM updates, up to 9 impressions of the page count may be lost. The counter will be reset to zero after 16,777,215 ( 2^24-1) pages. The page count is incremented when a sheet of media is pulled from an input tray. A duplex printed sheet will cause this counter to be incremented by two.
INT prtmarkermarktech	1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.2	INTEGER	read-only	The type of marking technology used for this marking sub-unit.
INT prtmarkernorthmargin	1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.11	INTEGER	read-only	The margin, in units identified by AddressabilityUnit, from the leading edge of the medium as the medium flows throught the marking engine with the side to be imaged facing the observer. The leading edge is the North edge and the other edges are defined by the normal compass layout of directions with the compass facing the observer. Printing within the area bounded by all four margins is guaranteed for all interpreters. The value (-2) means unknown.
INT prtmarkerpoweroncount	1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.5	INTEGER	read-only	The count of the number of units of measure counted since the equipment was most recently powered on using units of measure as specified by CounterUnit.
INT prtmarkerprocesscolorants	1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.6	INTEGER	read-only	The number of process colors supported by this marker. A process color of 1 implies monochrome. The value of this object and SpotColorants cannot both be 0. Must be 0 or greater.
INT prtmarkersouthmargin	1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.12	INTEGER	read-only	The margin from the South edge (see NorthMargin) of the medium in units identified by AddressabilityUnit. Printing within the area bounded by all four margins is guaranteed for all interpreters. The value (-2) means unknown.
INT prtmarkerspotcolorants	1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.7	INTEGER	read-only	The number of spot colors supported by this marker. The value of this object and ProcessColorants cannot both be 0. Must be 0 or greater.
INT prtmarkerstatus	1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.15	INTEGER	read-only	The current status of this marker sub-unit. The status is an integer that is the sum of 5 distinct values, Availability, Non-Critical, Critical, On-line, and Transitioning. These values are: Availability value Available and Idle 0 000'b Available and Standby 2 010'b Available and Active 4 100'b Available and Busy 6 110'b Unavailable and OnRequest 1 001'b Unavailable because Broken 3 011'b Unknown 5 101'b Non-Critical No Non-Critical Alerts 0 Non-Critical Alerts 8 Critical No Critical Alerts 0 Critical Alerts 16 On-Line Intended state is On-Line 0 Intended state is Off-Line 32 Transitioning At intended state 0 Transitioning to intended state 64 Additional information: See SubUnitStatus in RFC1759 Printer MIB for details on values reported by this object. LaserJet 5Si will not include values Available and Active (4) or Unknown (5).
prtMarkerSupplies	1.3.6.1.4.1.11.2.3.9.4.2.2.11
INT prtmarkersuppliesclass	1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1.4	INTEGER	read-only	Indicates whether this supply entity represents a supply container that is consumed or a receptacle that is filled.
INT prtmarkersuppliescolorantindex	1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1.3	INTEGER	read-only	The value of prtMarkerColorantIndex corresponding to the colorant with which this marker supply sub-unit is associated. This value shall be 0 if there is no colorant table.
OCT prtmarkersuppliesdescription	1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1.6	OCTET STRING	read-only	The description of this supply container/receptacle in the localization specified by prtGeneralCurrentLocalization.
prtMarkerSuppliesEntry	1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1
INT prtmarkersupplieslevel	1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1.9	INTEGER	read-only	The current level if this supply is a container; the remaining space if this supply is a receptacle. If this supply container/receptacle can reliably sense this value, the value is sensed by the printer and is read-only; otherwise, the value may be written (by a Remote Contol Panel or a Management Application). The value (-1) means other and specifically indicates that the sub-unit places no restrictions on this parameter. The value (-2) means unknown. A value of (-3) means that the printer knows that there is some supply/remaining space, respectively. Additional information: LaserJet 5Si detects the toner level as being either above or below the 'LOW' sensor. Therefore, a value of -3 is returned when the level is above the 'LOW' sensor and a value of -2 is returned when the toner cartridge detects the 'LOW' condition.
INT prtmarkersuppliesmarkerindex	1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1.2	INTEGER	read-only	The value of prtMarkerIndex corresponding to the marking sub-unit with which this marker supply sub-unit is associated.
INT prtmarkersuppliesmaxcapacity	1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1.8	INTEGER	read-only	The maximum capacity of this supply container/receptacle expressed in SupplyUnit. If this supply container/receptacle can reliably sense this value, the value is sensed by the printer and is read-only; otherwise, the value may be written (by a Remote Contol Panel or a Management Application). The value (-1) means other and specifically indicates that the sub-unit places no restrictions on this parameter. The value (-2) means unknown.
INT prtmarkersuppliessupplyunit	1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1.7	INTEGER	read-only	Unit of this marker supply container/receptacle.
prtMarkerSuppliesTable	1.3.6.1.4.1.11.2.3.9.4.2.2.11.1
INT prtmarkersuppliestype	1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1.5	INTEGER	read-only	The type of this supply.
prtMarkerTable	1.3.6.1.4.1.11.2.3.9.4.2.2.10.2
INT prtmarkerwestmargin	1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.13	INTEGER	read-only	The margin from the West edge (see NorthMargin) of the medium in units identified by AddressabilityUnit. Printing within the area bouned by all four margins is guaranteed for all interpreters. The value (-2) means unknown.
prtMediaPath	1.3.6.1.4.1.11.2.3.9.4.2.2.13
INT prtmediapathdefaultindex	1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.9	INTEGER	read-write	The value of prtMediaPathIndex corresponding to the default media path; that is, the selection of the default media path.
OCT prtmediapathdescription	1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.10	OCTET STRING	read-only	The manufacturer-provided description of this media path in the localization specified by prtGeneralCurrentLocalization.
prtMediaPathEntry	1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1
INT prtmediapathmaxmediafeeddir	1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.5	INTEGER	read-only	The maximum physical media size in the feed direction of this media path expressed in units of measure specified by MediaSizeUnit. A value of (-1) implies 'unlimited'. A value of (-2) implies 'unknown' Additional information: The value returned by this object depends on the value of prtMediaPathMediaSizeUnit. It is 177000 if prtMediaPathMediaSizeUnit is ePtenThousandthsOfInches or 449600 if prtMediaPathMediaSizeUnit is ePmicrometers.
INT prtmediapathmaxmediaxfeeddir	1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.6	INTEGER	read-only	The maximum physical media size across the feed direction of this media path expressed in units of measure specified by MediaSizeUnit. A value of (-2) implies 'unknown'. Additional information: The value returned by this object depends on the value of prtMediaPathMediaSizeUnit. It is 117000 if prtMediaPathMediaSizeUnit is ePtenThousandthsOfInches or 297000 if prtMediaPathMediaSizeUnit is ePmicrometers.
INT prtmediapathmaxspeed	1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.4	INTEGER	read-only	The maximum printing speed of this media path expressed in prtMediaPathMaxSpeedUnit's. A value of (-1) implies 'other'. Additional information: The page size for this performance is 8.5x11. The duplex speed is based on 9.5 ppm.
INT prtmediapathmaxspeedprintunit	1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.2	INTEGER	read-only	The unit of measure used in specifying the speed of all media paths in the printer.
INT prtmediapathmediasizeunit	1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.3	INTEGER	read-only	The units of measure of media size for use in calculating and relaying dimensional values for all media paths in the printer.
INT prtmediapathminmediafeeddir	1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.7	INTEGER	read-only	The minimum physical media size in the feed direction of this media path expressed in units of measure specified by MediaSizeUnit. A value of (-2) implies 'unknown'. Additional information: The value returned by this object depends on the value of prtMediaPathMediaSizeUnit. For the simplex paper path it is 75000 if prtMediaPathMediaSizeUnit is ePtenThousandthsOfInches or 190500 if prtMediaPathMediaSizeUnit is ePmicrometers. For the duplex paper path it is 105000 if prtMediaPathMediaSizeUnit is ePtenThousandthsOfInches or 266700 if prtMediaPathMediaSizeUnit is ePmicrometers. This sizes correspond to a Monarch envelope length for simplex, Executive paper length for duplex. ( Note: When printing on Custom size media, the engine will allow a paper size smaller than Executive for the duplex path, but Executive is the smallest supported size.)
INT prtmediapathminmediaxfeeddir	1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.8	INTEGER	read-only	The minimum physical media size across the feed direction of this media path expressed in units of measure specified by MediaSizeUnit. A value of (-2) implies 'unknown'. Additional information: The value returned by this object depends on the value of prtMediaPathMediaSizeUnit. It is 38750 if prtMediaPathMediaSizeUnit is ePtenThousandthsOfInches or 98425 if prtMediaPathMediaSizeUnit is ePmicrometers. This size corresponds to a Monarch envelope for the simplex path, Executive size for the duplex path. ( Note: When printing on Custom size media, the engine will allow a paper size smaller than Executive for the duplex path, but Executive is the smallest supported size.)
INT prtmediapathstatus	1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.11	INTEGER	read-only	The current status of this media path. The status is an integer that is the sum of 5 distinct values, Availability, Non-Critical, Critical, On-line, and Transitioning. These values are: Availability value Available and Idle 0 000'b Available and Standby 2 010'b Available and Active 4 100'b Available and Busy 6 110'b Unavailable and OnRequest 1 001'b Unavailable because Broken 3 011'b Unknown 5 101'b Non-Critical No Non-Critical Alerts 0 Non-Critical Alerts 8 Critical No Critical Alerts 0 Critical Alerts 16 On-Line Intended state is On-Line 0 Intended state is Off-Line 32 Transitioning At intended state 0 Transitioning to intended state 64 Additional information: The default values assume the printer is idle. See SubUnitStatus in RFC1759 Printer MIB for details on values reported by this object. LaserJet 5Si will not include values Available and Standby (2), Available and Active (4), Unknown (5), Non-CriticalAlerts (8) or Transitioning to intended state (64).
prtMediaPathTable	1.3.6.1.4.1.11.2.3.9.4.2.2.13.4
INT prtmediapathtype	1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.9	INTEGER	read-only	The type of the media path for this media path.
prtOutput	1.3.6.1.4.1.11.2.3.9.4.2.2.9
INT prtoutputbursting	1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.21	INTEGER	read-only	This object indicates that the outputing sub-unit supports bursting, and if so, whether the feature is enabled. Bursting is the process by which continuous media is separated into individual sheets, typically by bursting along pre-formed perforations.
INT prtoutputcapacityunit	1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.3	INTEGER	read-only	The unit of measurement for use in calculating and relaying capacity values for this output sub-unit. Additional information: A sheet is a single piece of 20 pound paper.
INT prtoutputdecollating	1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.22	INTEGER	read-only	This object indicates that the output supports supports decollating, and if so, whether the feature is enabled. Decollating is the process by which the individual parts within a multi-part form are separated and sorted into separate stacks for each part.
INT prtoutputdefaultindex	1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.7	INTEGER	read-write	The value of prtOutputIndex corresponding to the default output sub-unit; that is, this object selects the default output destination.
OCT prtoutputdescription	1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.12	OCTET STRING	read-only	A free-form text description of this output sub-unit in the localization specified by prtGeneralCurrentLocalization.
prtOutputEntry	1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1
INT prtoutputmaxcapacity	1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.4	INTEGER	read-only	The maximum capacity of this output sub-unit in output sub-unit capacity units (CapacityUnit). There is no convention associated with the media itself so this value essentially reflects claimed capacity. If this output sub-unit can reliably sense this value, the value is sensed by the printer and may not be changed by management requests; otherwise, the value may be written (by a Remote Contol Panel or a Management Application). The value (-1) means other and specifically indicates that the sub-unit places no restrictions on this parameter. The value (-2) means unknown. Additional information: Output sub-unit 2 is not supported if any output paper handling device is attached. The capacity of sub-unit 4 depends on the mode of operation. The capcities are as follows: Stacker: 2000 (sub-units 5-11 do not exist) Job Separator: 250 (sub-units 5-11 do not exist) Mailbox: 250 (this is the default mode)
OCT prtoutputmodel	1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.9	OCTET STRING	read-only	The name assigned to this output sub-unit. Additional information: The value returned by Tlatoani depends on the current mode of the device. The possible values are as follows: MULTIBIN MAILBOX C3764A MULTIBIN STACKER C3764A MULTIBIN SEPARATOR C3764A.
OCT prtoutputname	1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.7	OCTET STRING	read-write	The name assigned to this output sub-unit. Additional information: The characters must be in the range 20H to 7FH except 5C cannot be used. When this string is displayed on the control panel the Roman-8 symbol set is used. The object for bin 2 is not available when the HCO is attached.
INT prtoutputoffsetstacking	1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.24	INTEGER	read-only	This object indicates that the output supports supports offset stacking, and if so, whether the feature is enabled.
INT prtoutputpagecollated	1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.23	INTEGER	read-only	This object indicates that the output sub-unit supports page collation, and if so, whether the feature is enabled.
INT prtoutputpagedeliveryorientation	1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.20	INTEGER	read-only	The reading surface that will be `up' when pages are delivered to the associated output sub-unit. Values are Face-Up and Face-Down. (Note: interpretation of these values is in general context-dependent based on locale; presentation of these values to an end-user should be normalized to the expectations of the user).
INT prtoutputremainingcapacity	1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.5	INTEGER	read-only	The remaining capacity of the possible output sub-unit capacity in output sub-unit capacity units (CapacityUnit) of this output sub-unit. If this output sub-unit can reliably sense this value, the value is sensed by the printer and may not be modified by management requests; otherwise, the value may be written (by a Remote Contol Panel or a Management Application). The value (-1) means other and specifically indicates that the sub-unit places no restrictions on this parameter. The value (-2) means unknown. The value (-3) means that the printer knows that there remains capacity for at least one unit. Additional information: The values reported for output sub-unit 1 (face-down, top bin) will be either (-3) if it is not full or (0) if it is full. Output sub-unit 2 (face-up, left side bin) does not have any sensing, so it will always report unknown (-2). The first output sub-unit (3) of the HCO reports either (62) if it is not full or (0) if it is full. In mailbox mode, the HCO sub-units (4-11) will report (250) when empty, (125) when there's room for <250 sheets and (0) when full. In stacker and job separator modes all bins are treated as a single output bin so sub-unit 4 will report (2000) when all bins are empty. A value of (0) is reported when the topmost bin is full (stacker mode) or when all bins are full (separator mode). When the stacker or separator has started filling, the value reported is based on the number of bins that are empty, partially filled and full. A percentage is calculated based on the status of each bin. Each full bin counts 1, each not empty/not full bin counts 0.5 and each empty bin counts 0. The result is mapped to an estimate of the remaining capacity as follows (percent full is included here for completeness, since that is how the HCO reports it to the printer): 0.0 0 (100%) 0.5 200 ( 90%) 1.0 300 ( 85%) 1.5 400 ( 80%) 2.0 500 ( 75%) 2.5 700 ( 65%) 3.0 800 ( 60%) 3.5 900 ( 55%) 4.0 1000 ( 50%) 4.5 1200 ( 40%) 5.0 1300 ( 35%) 5.5 1400 ( 30%) 6.0 1500 ( 25%) 6.5 1700 ( 15%) 7.0 1800 ( 10%) 7.5 1900 ( 5%) 8.0 2000 ( 0%) Note: Due to HCO mechanism limitations, the value reported may not always be accurate (the bin status is detected only when the media delivery head is moved to or past a physical bin). Also, for stacker mode a bin is considered full as long as any bin above it is not empty. Default values assume all sub-units are empty and the HCO is in mailbox mode.
INT prtoutputsecurity	1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.13	INTEGER	read-only	Indicates if this output sub-unit has some security associated with it and if that security is enabled or not. Additional information: No security mechanism provided.
OCT prtoutputserialnumber	1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.11	OCTET STRING	read-only	The serial number assigned to this output sub-unit.
INT prtoutputstackingorder	1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.19	INTEGER	read-only	The current state of the stacking order for the associated output sub-unit. `FirstToLast' means that as pages are output the front of the next page is placed against the back of the previous page. `LasttoFirst' means that as pages are output the back of the next page is placed against the front of the previous page.
INT prtoutputstatus	1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.6	INTEGER	read-only	The current status of this output sub-unit. The status is an integer that is the sum of 5 distinct values, Availability, Non-Critical, Critical, On-line, and Transitioning. These values are: Availability value Available and Idle 0 000'b Available and Standby 2 010'b Available and Active 4 100'b Available and Busy 6 110'b Unavailable and OnRequest 1 001'b Unavailable because Broken 3 011'b Unknown 5 101'b Non-Critical No Non-Critical Alerts 0 Non-Critical Alerts 8 Critical No Critical Alerts 0 Critical Alerts 16 On-Line Intended state is On-Line 0 Intended state is Off-Line 32 Transitioning At intended state 0 Transitioning to intended state 64 Additional information: The default values assume all bins are empty. See SubUnitStatus in RFC1759 Printer MIB for details on values reported by this object. LaserJet 5Si will not include values Available and Standby (2), Available and Active (4), Unknown (5) or Transitioning to intended state (64).
prtOutputTable	1.3.6.1.4.1.11.2.3.9.4.2.2.9.2
INT prtoutputtype	1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.2	INTEGER	read-only	The type of technology supported by this output sub-unit.
OCT prtoutputvendorname	1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.8	OCTET STRING	read-only	The vendor name of this output sub-unit.
OCT prtoutputversion	1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.10	OCTET STRING	read-only	The version of this output sub-unit. Additional information: Returns device-specific information about the configuration of the output bin. May include information about the type of processing that can be done to media sent to this bin; processing includes but is not limited to binding, punching, folding and sealing. Format of this object is specified by the output device documentation.
prtStorageRefEntry	1.3.6.1.4.1.11.2.3.9.4.2.2.5.2.1
INT prtstoragerefindex	1.3.6.1.4.1.11.2.3.9.4.2.2.5.2.1.2	INTEGER	read-only	The value of the hrDeviceIndex of the printer device that this storageEntry is associated with.
prtStorageRefTable	1.3.6.1.4.1.11.2.3.9.4.2.2.5.2
remote_procedure_call	1.3.6.1.4.1.11.2.3.9.4.2.1.1.13
resource_manager	1.3.6.1.4.1.11.2.3.9.4.2.1.1.12
INT resource_saving	1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.6	INTEGER	read-write	Returns or changes PDL resource saving. Resource saving stores a PDL's permanent soft resources, like fonts, even when another PDL is active. Resource saving is also called environment saving. When eOff, resource saving is disabled. When ON, resource saving is enabled and memory is set aside for each PDL based on that PDL's resource saving memory size object, to store that PDL's permanent soft resources. When eAuto, resource saving is enabled and memory space for each installed PDL is determined automatically. The device POS should document what values are legal when only one PDL is installed. Additional information: When PCL is the only PDL installed in LaserJet 5Si, all resource saving memory is dedicated to PCL so eOff is the only valid value. Attempting to set this object to eAuto or eOn with a PCL-only printer will result in a status of being returned. When PostScript is installed and there is less than 13M of memory installed, the only valid value for this object is eOff. Attempting to set this object to eOn or eAuto will cause to be returned. When PostScript and a duplex unit are installed and there is less than 24M of memory installed, the only valid value for this object is eOff. Attempting to set this object to eOn or eAuto will cause to be returned. When PostScript and 13M (24M with duplex unit) or more are installed, all values are valid, provided I/O Buffering has not consumed the needed memory.
rpc_bind	1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.3
OCT rpc_bind_protocol_address	1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.1.2	OCTET STRING	read-write	Array of Berkeley sockets style protocol addresses used to bind RPC to a communications protocol family. Setting an instance of this array object to a zero length binary value disables the transport protocol indicated by that instance. All multi-bytes fields are in network (or big-endian) order. Bytes 1 and 2 indicate the transport protocol. Some of the transport protocol mapping information can be found in RFC 1010 Assigned Numbers. A list of interesting transport protocol number mappings include: Protocol \| Number ---------+------- UDP/IP \| 17 IPX \| 1000 Bytes 3 and 4 indicate the address family. The address family uses the same mapping as the BSD sockets address family. A list of interesting address family mappings include: Address Family \| Number ---------------+------- Internet \| 2 NetWare \| 6 The format the fifth and following bytes is dependent on the address family. For the Internet address family, bytes 5 and 6 contain the port number, bytes 7 through 10 contain the IP address, and the following eight bytes are unused. For NetWare, bytes 5 through 8 are the network number, bytes 9 through 14 are the node number, and bytes 15 and 16 are the socket number. Additional information: The length of the binary value is zero if the instance of an object in the rpc-bind-protocol-address array is not in use. A side effect of the implementation is initializing the mass storage device sets this object back to the factory default value. Returns status if attempting to access this object and there is no storage device is installed.
INT rpc_bind_statistic_successful	1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.3.2.1	INTEGER	read-only	A counter indicating the number of RPC bind (RPC program number 100000, version 2) requests that completed successfully. The POS should state if a power cycle causes the counter is be reset to zero. Additional information: Reset to the factory default value after a power cycle. Returns status if attempting to access this object and there is no storage device is installed.
INT rpc_bind_statistic_unsuccessful	1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.3.2.2	INTEGER	read-only	A counter indicating the number of RPC bind (RPC program number 100000, version 2) requests that completed unsuccessfully. The POS should state if a power cycle causes the counter is be reset to zero. Additional information: Reset to the factory default value after a power cycle. Returns status if attempting to access this object and there is no storage device is installed.
OCT rpc_bind_test_return_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.3.1.1	OCTET STRING	write-only	This test object that will not be supported in any released product. Setting this object allows the next RPC bind call return code to be specified. The POS will specify the binary format. Additional information: A one byte value. value \| meaning ------+------------------ 1 \| Next GetPort or GetAddr will receive port 0 \| (indicating the service is not supported). 2 \| Next Dump will receive an empty table.
OCT rpc_bound_protocol_address	1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.2.3	OCTET STRING	read-only	An array of Berkeley sockets style protocol addresses that the NFS service has been bound to successful. The format is that same as the array of RPC-BIND-PROTOCOL- ADDRESS of objects. Additional information: Returns status if attempting to access this object and there is no storage device is installed.
rpc_services	1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3
INT rpc_statistic_successful	1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.2.1	INTEGER	read-only	A counter indicating the number of RPC requests that completed successfully (reply_data stat is SUCCESS). The POS should state if a power cycle causes the counter is be reset to zero. Additional information: Reset to the factory default value after a power cycle. Returns status if attempting to access this object and there is no storage device is installed.
INT rpc_statistic_unsuccessful	1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.2.2	INTEGER	read-only	A counter indicating the number of RPC requests that completed unsuccessfully (reply_data stat is not SUCCESS). The POS should state if a power cycle causes the counter is be reset to zero. Additional information: Reset to the factory default value after a power cycle. Returns status if attempting to access this object and there is no storage device is installed.
OCT rpc_test_return_code	1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.1.1	OCTET STRING	write-only	This test object that will not be supported in any released product. Setting this object allows the next RPC call return code to be specified. The POS will specify the binary format. Additional information: The format of the binary data is a one of three formats. The first format is no binary data, which indicates the next RPC reply should not be modified. The other two formats are described in RFC 1057 and encoded using XDR (i.e. the value is the data used to instead of the actual RPC reply). The second format is when reply_stat is MSG_ACCEPTED and accept_stat is something other than SUCCESS. The third format is when reply_stat is MSG_DENIED. Notice that all RPC replies that do not contain any 'results' are supported.
INT self_test	1.3.6.1.4.1.11.2.3.9.4.2.1.1.5.1	INTEGER	read-write	Writing this object allows a device self test to be started. Reading this object provides an indication what self-test is currently executing, if any. Actual self-test operation is device specific. A self test may not be allowed at any arbitrary time. If the device supports the requested self test, but can not start the execution of the self test when requested, the device will respond with . If a non-destructive self test is being started, the device will generate a response before the self test is completed. RECOMMENDATION: If the device is ready (i.e. the NOT- READY-PRINTER object does not contain any items, except maybe being off-line) and is idle (i.e. the NOT-IDLE object does not contain any items), this request should always succeed. This provides a mechanism for driver writers to always determine if the action will succeed or not. Additional information: The eNonDestructiveSelfTest performs limited testing on the printer and its attached paper handling devices. After the self-test is complete a configuration page is printed. The recommended way to cause a configuration page to be printed is to use the PRINT-INTERNAL-PAGE object. A continuous self test cannot be started or terminated using this OID. The printer must be idle before it can execute a self test. The best method to assure that the printer is idle is to set the object ON-OFF-LINE to eOfflineAtEndOfJob, wait for the printer to be offline and then execute the self test. The printer will put itself online to print the page. When the printer is idle, setting this object to eNonDestructiveSelfTest results in a status of and a value of eNonDestructiveSelfTest being returned. If the printer is not idle (whether printing an external job, printing an internal page or running self test), a status of status will be returned with a value of eNotInASelfTest. When the printer is idle, setting this object to eNonDestructiveSelfTestcauses some internal testing, the page to be formatted and put in the printer's print queue. Before the page is in the print queue, a get on this object will return eNonDestructiveSelfTest (it is currently estimated that the time to format the page is one millisecond). Attempting to set this object before the page has completed being formatted and printed will cause status to be returned with a value of eNotInASelfTest. After the page is in the queue, a get on this object will return a value of eNotInASelfTest. Setting this object to eNonDestructiveSelfTest before the first page has completed results in a status of status with a value of eNotInASelfTest. Likewise, if the PRINT-INTERNAL-PAGE object is set to a valid value and that page has not printed when this object is set to eNonDestructiveSelfTest, a status of status with a value of eNotInASelfTest will be returned until the internal page has printed.
STR serial_number	1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.3	DisplayString	read-only	Identifies the serial number for the device. If the SERIAL-NUMBER object is set by the user, then setting the object does not need to be protected. If the SERIAL-NUMBER object is set at the factory, then the SERVICE-PASSWORD object must be set correctly before the SERIAL-NUMBER object is writable. If this is a writable object, the POS should indicate the maximum supported string length. If possible, encode the serial number in a symbol set (like Roman-8) that matches the ASCII character set and limit the characters used to ASCII characters. Additional information: The format of the LaserJet 5Si serial number is: aaxxyynnnn where: aa=A-Z, xx=A..Z & 0..9, yy=0..9 & A..Z, nn=0..9 This object is read-only so the SERVICE-PASSWORD object is not used.
settings_file_system	1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1
settings_intray	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1
settings_io	1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1
settings_job	1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1
settings_marking_agent	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.5.1
settings_mount	1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.1.1
settings_msbd2	1.3.6.1.4.1.11.2.3.9.4.2.1.1.15.3.2.1
settings_nfs_server	1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.2.1
settings_outbin	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.1
settings_pdl	1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1
settings_print_media	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.1
settings_prt_eng	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1
settings_rpc	1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.1
settings_rpc_bind	1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.3.1
settings_system	1.3.6.1.4.1.11.2.3.9.4.2.1.1.1
simm	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1
simm1	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.1
INT simm1_capacity	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.1.5	INTEGER	read-only	Returns an indication of the capacity of the SIMM installed in SIMM slot 1. The capacity is dependent on the type of option, as indicated by the SIMM1-TYPE object. This object has no meaning if the installed option type is eUnknown or eReadOnlyMemory. This object contains the size, in bytes, if the installed option type is eVolatileRandomAccessMemory, eNonVolatileRandomAccessMemory, eFlashMemory, or eDiskDrive. If the type of the installed option is eRamRom, this object contains the size, in bytes, of the random access memory. If the type of the installed option is eInputPHD, the capacity indicates the number of input trays supported by the installed option. If the type of the installed option is eOutputPHD, the capacity indicates the number of output bins supported by the installed option. If the type of the installed option is eIOCard, the capacity indicates the number of logical I/O ports supported by the I/O card. Additional information: Returns an indication of the capacity of the installed option in bytes. This object is not supported unless the SIMM1-TYPE type is eVolatileRandomAccessMemory.
INT simm1_type	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.1.4	INTEGER	read-only	Returns an indication of the type of option installed in SIMM slot 1. eEmpty means the device did not detect any option installed in the interface slot. eUnknown means the device doesn't recognize the installed option. eUnSupported means the device recognizes the installed option, but does not support the option. eReadOnlyMemory means the installed option contains ROM Ics. eVolatileRandomAccessMemory means the installed option contains RAM ICs that loose data when the power is turned off. eNonVolatileRandomAccessMemory means that the installed option contains RAM ICs that do not loose data when the power is turned off. eFlashMemory means that the installed option contains a type of non-volatile RAM that needs to be erased before it can be written. eDiskDrive means the installed option contains a disk drive. eRamRom means the installed option contains both volatile random access memory and read only memory. eInputPHD means the installed option is an input paper handling device. eOutputPHD means the installed option is an output paper handling device. eIOCard means the installed option is an I/O card.
simm2	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.2
INT simm2_capacity	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.2.5	INTEGER	read-only	Returns an indication of the capacity of the SIMM installed in SIMM slot 2. See SIMM1-CAPACITY for a description. Additional information: Returns an indication of the capacity of the installed option in bytes. This object is not supported unless the SIMM2-TYPE type is eVolatileRandomAccessMemory.
INT simm2_type	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.2.4	INTEGER	read-only	Returns an indication of the type of option installed in SIMM slot 2. See SIMM1-TYPE for a description.
simm3	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.3
INT simm3_capacity	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.3.5	INTEGER	read-only	Returns an indication of the capacity of the SIMM installed in SIMM slot 3. See SIMM1-CAPACITY for a description. Additional information: Returns an indication of the capacity of the installed option in bytes. This object is not supported unless the SIMM3-TYPE type is eVolatileRandomAccessMemory.
INT simm3_type	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.3.4	INTEGER	read-only	Returns an indication of the type of option installed in SIMM slot 3. See SIMM1-TYPE for a description.
simm4	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.4
INT simm4_capacity	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.4.5	INTEGER	read-only	Returns an indication of the capacity of the SIMM installed in SIMM slot 4. See SIMM1-CAPACITY for a description. Additional information: Returns an indication of the capacity of the installed option in bytes. This object is not supported unless the SIMM4-TYPE type is eVolatileRandomAccessMemory.
INT simm4_type	1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.4.4	INTEGER	read-only	Returns an indication of the type of option installed in SIMM slot 4. See SIMM1-TYPE for a description.
INT sleep_mode	1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.2	INTEGER	read-write	Returns eTrue if the device is in energy saving sleep mode, otherwise returns eFalse. Setting SLEEP-MODE to eFalse causes the device to wake up, if it is in sleep mode. Setting SLEEP-MODE to eTrue causes the device to go into sleep mode. Additional information: Setting to this object to eTrue while printer is awake will not change the printer's current state and will return status. Setting to this object to eTrue while printer is already in the Sleep Mode will not change the printer's current state and will return status. Setting to eFalse while printer is already awake will not change the printer's current state and will return status.
source_subsystem	1.3.6.1.4.1.11.2.3.9.4.2.1.2
status_file_system	1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.2
status_nfs_server	1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.2.2
status_pdl	1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.2
status_prt_eng	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2
status_rpc	1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.2
status_rpc_bind	1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.3.2
status_system	1.3.6.1.4.1.11.2.3.9.4.2.1.1.2
status_xip	1.3.6.1.4.1.11.2.3.9.4.2.1.1.14.2
system	1.3.6.1.4.1.11.2.3.9.4.2.1.1
tables	1.3.6.1.4.1.11.2.3.9.4.2.1.7
test	1.3.6.1.4.1.11.2.3.9.4.2.1.1.5
INT tray4_phd	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.4.12	INTEGER	read-only	Provides the number of the Paper Handling Device that contains this input tray.
INT tray5_phd	1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.5.12	INTEGER	read-only	Provides the number of the Paper Handling Device that contains this input tray.
INT xip_statistic_data_in_dropped	1.3.6.1.4.1.11.2.3.9.4.2.1.1.14.2.2	INTEGER	read-only	A counter indicating the number of XIP data in datagrams that were dropped (typically due to the printer being flooded with XIP requests ). The POS should state if a power cycle causes the counter is be reset to zero. Additional information: Reset to the factory default value after a power cycle. Returns status if attempting to access this object and there is no storage device is installed.
INT xip_statistic_processed	1.3.6.1.4.1.11.2.3.9.4.2.1.1.14.2.1	INTEGER	read-only	A counter indicating the number of XIP requests that were processed. The POS should state if a power cycle causes the counter is be reset to zero. Additional information: The number of XIP datagrams that have been received by the XIP service. Reset to the factory default value after a power cycle. Returns status if attempting to access this object and there is no storage device is installed.
xport_interface	1.3.6.1.4.1.11.2.3.9.4.2.1.1.14

RFC description

Manages HP LaserJet 5Si printer model-specific features via JetDirect print server.

Start monitoring HP LaserJet 5Si laser printer with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download LaserJet5Si-MIB

What Is LaserJet5Si-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description