Description: Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: Returns a device specific error code. If the error code returned is '0', then the printer has not yet logged an error for this object. When the maximum number of errors is reached (10 on the HP LaserJet 2100 Series), and a new error occurs, the error in ERROR1-CODE will be replaced by the one in ERROR2-CODE, and so on until the last error object will be given the value of the new error. The error category is returned in the upper 16 bits, either 79 (for service) or 0 (for support). The lower 16 bits encodes the specific error. If an error is not a 79 service error, the value of this object is the PJL USTATUS code. If it is a 79 service error, the lower 16 bits contain the PJL USTATUS code. The types of errors reported for the HP LaserJet 2100 Series are: Page Punt (21 Print Overrun) 49 Service Error 50-67 Service Error 69 Service Error 70-72 Service Error 79 Service Errors Beam Detect Malfunction Laser Malfunction Engine Communication Error Bad Fan Motor Bad Scanner Motor Bad Beam Detect Bad Fuser NVRAM Error NVRAM Service Bad MIO