HP-ICF

MIB Reference — IPNetwork Monitor

All MIBs › HP-ICF

Category: Device Management, Textual Conventions and Registries, Vendor: HP/HPE

Description:

HP Integrated Communication Facility root MIB defining the OID subtree and base registration for HP ProCurve/ICF product line.

This MIB depends on

Related MIBs

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
Gauge
IpAddress
TimeTicks
enterprises

From RFC1213-MIB

DisplayString

From SNMP-REPEATER-MIB

rptrAddrTrackLastSourceAddressOBJECT-TYPE
rptrPortAdminStatusOBJECT-TYPE

What Is HP-ICF?

HP-ICF is the root SNMP MIB module for HP's Integrated Communication Facility (ICF) enterprise product line, the proprietary architecture underlying many HP/HPE ProCurve and Aruba-branded switches and wireless products. Rather than exposing hardware sensors directly, it defines base error-extension objects and the OID registration point that all other HP-ICF-prefixed MIBs (OOBM, URPF, firewall, PAE, etc.) build upon. One documented object provides enterprise-specific detailed error codes returned when an SNMP SET request fails, giving management stations more granular diagnostic information than the standard PDU errorStatus, including cases that would otherwise just report a generic genErr. In this sense it supports monitoring management-plane software status — specifically the success or failure detail of configuration changes made via SNMP — rather than physical hardware telemetry. It underlies and is a required dependency of the entire family of HP-ICF-* product MIBs, and is deployed wherever HP ICF-architecture switches, routers, or wireless controllers are managed via SNMP. Engineers can download the HP-ICF file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HP-ICF. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

What Can Be Monitored

  • detailed SNMP SET error/failure codes
  • root OID registration for ICF product MIBs

Supported Devices

  • HP/HPE ProCurve and Aruba switches (ICF architecture)

Monitoring Examples

A management application that issues an SNMP SET to change a switch configuration object and receives a genErr can consult the HP-ICF error-extension object to retrieve a more specific enterprise error code explaining exactly why the SET failed, rather than just a generic failure indicator. This is useful for automated configuration tools that need to distinguish transient from permanent SET failures across a fleet of HP ICF-based switches.

OIDs
OID symbolicOID numericTypeAccessDescription
hp1.3.6.1.4.1.11
nm1.3.6.1.4.1.11.2
hpSystem1.3.6.1.4.1.11.2.3
netElement1.3.6.1.4.1.11.2.3.7
bridge1.3.6.1.4.1.11.2.3.7.1
bridge10101.3.6.1.4.1.11.2.3.7.1.1
bridgeRemote1.3.6.1.4.1.11.2.3.7.1.2
eswitch1.3.6.1.4.1.11.2.3.7.1.3
router1.3.6.1.4.1.11.2.3.7.2
icfRouterER1.3.6.1.4.1.11.2.3.7.2.1
icfRouterTR1.3.6.1.4.1.11.2.3.7.2.2
icfRouterSR1.3.6.1.4.1.11.2.3.7.2.3
icfRouterFR1.3.6.1.4.1.11.2.3.7.2.4
icfRouterLR1.3.6.1.4.1.11.2.3.7.2.5
icfRouterBR1.3.6.1.4.1.11.2.3.7.2.6
icfRouterPR1.3.6.1.4.1.11.2.3.7.2.7
icfRouter6501.3.6.1.4.1.11.2.3.7.2.8
icfRouter650Engine1.3.6.1.4.1.11.2.3.7.2.8.2
icfRouter650Port4E1.3.6.1.4.1.11.2.3.7.2.8.3
icfRouter650Port4S1.3.6.1.4.1.11.2.3.7.2.8.4
icfRouter650Port4T1.3.6.1.4.1.11.2.3.7.2.8.5
icfRouter2301.3.6.1.4.1.11.2.3.7.2.9
icfRouter2501.3.6.1.4.1.11.2.3.7.2.10
icfRouter2551.3.6.1.4.1.11.2.3.7.2.11
icfRouter2101.3.6.1.4.1.11.2.3.7.2.12
hub1.3.6.1.4.1.11.2.3.7.5
etherTwist121.3.6.1.4.1.11.2.3.7.5.1
fiberOptic1.3.6.1.4.1.11.2.3.7.5.3
etherTwist481.3.6.1.4.1.11.2.3.7.5.4
thinLAN1.3.6.1.4.1.11.2.3.7.5.5
etherTwist24S1.3.6.1.4.1.11.2.3.7.5.6
advStack121.3.6.1.4.1.11.2.3.7.5.7
advStack241.3.6.1.4.1.11.2.3.7.5.8
advStack481.3.6.1.4.1.11.2.3.7.5.9
advStackVg151.3.6.1.4.1.11.2.3.7.5.10
advStackU81.3.6.1.4.1.11.2.3.7.5.11
advStackU161.3.6.1.4.1.11.2.3.7.5.12
chassis1.3.6.1.4.1.11.2.3.7.8
repeaterAgent1.3.6.1.4.1.11.2.3.7.8.1
chassisAgents1.3.6.1.4.1.11.2.3.7.8.2
icfVgAgent1.3.6.1.4.1.11.2.3.7.8.2.1
icfEnetAgent1.3.6.1.4.1.11.2.3.7.8.2.2
icfSensors1.3.6.1.4.1.11.2.3.7.8.3
icfPowerSupplySensor1.3.6.1.4.1.11.2.3.7.8.3.1
icfFanSensor1.3.6.1.4.1.11.2.3.7.8.3.2
icfTemperatureSensor1.3.6.1.4.1.11.2.3.7.8.3.3
icf1.3.6.1.4.1.11.2.14
icfCommon1.3.6.1.4.1.11.2.14.1
NTF thresholdTrap1.3.6.1.4.1.11.2.14.1.0.0A thresholdTrap(0) is specific to ICF devices. It signifies that the threshold entity in the device has detected that the object identified by evthObject has exceeded the threshold identified by evthThreshold during the time interval evthTimeInterval. After this condition occurs, it will not reoccur until the the object identified by evthObject falls below evthHysteresis for the duration of evthTimeInterval.
INT lastSetError1.3.6.1.4.1.11.2.14.1.1INTEGERread-onlyProvide more detailed, enterprise specific error type. Any error resulting from a SET request will cause this object to be updated, and the previous value overwritten. A management entity may retrieve more detailed error information than that implied by the pdu's ErrorStatus, especially in the case of a genErr. In SNMPv2, there are several more error codes which provide most of the information that is provided by the above codes. Therefore, this object is now obsolete.
OCT password1.3.6.1.4.1.11.2.14.1.2OCTET STRINGread-writeThis is the encrypted password for the device. The algorithm used for the encryption process is HP proprietary. Third party vendor support is provided by not setting a password on the device, and using the community name 'public'. This object is now obsolete, and is supported only on 'D' revision EtherTwist hubs and bridges and earlier. It has been superseded by icfSecurPassword.
INT reset1.3.6.1.4.1.11.2.14.1.3INTEGERread-writeWhen the reset object is set to to 'warm' it results in a 'warm' reset, which does not clear the parameters in NOVRAM to factory defaults. When set to 'cold', it results in NOVRAM being set to factory defaults. When this object is set, the agent replies, dallies a short time to allow the reply to be emitted from the device, then performs the reset. When read, this object always returns 0. This object is now obsolete. It has been replaced by hpicfReset.
INT selfTest1.3.6.1.4.1.11.2.14.1.4INTEGERread-writeSelf test is invoked by setting this flag to 'stExecute. When the object changes to 'stSuccess', the test has completed successfully. Icf devices will 'hard-fail' if the test does not succeed. This object is now obsolete. It has been replaced by hpicfSelfTest.
IP semaphore1.3.6.1.4.1.11.2.14.1.5IpAddressread-writeThis object allows a set of objects to be locked. The lock is only assured by the 'cooperation' of other management entities; they must wait until the lock is cleared (to value zero) prior to setting the lock. When this object is set to a management entity's IP address, if no other management entity has previously set the lock, the set will succeed. Otherwise, an error (BadValue) will be returned. It is the responsibility of the owning management entity to clear the lock when the transactions complete. To protect against a management entity failure during a locked transaction, the agent is NOT responsible for verifying which management entity is performing transactions on locked objects; thus, any management entity can clear this object at any time. The agent does not do anything with this object except disallow multiple sets of different IP addresses (unless the object has been cleared to zero). This means management entities can use this for locking any valid transactions on defined sets of objects. This object can also be used on IPX networks by specifying the low 4 bytes of the station address for the IpAddress. This object is now obsolete. Individual groups of objects now maintain their own locking mechanisms.
discovery1.3.6.1.4.1.11.2.14.1.6
INT pollResponse1.3.6.1.4.1.11.2.14.1.6.1INTEGERread-writeFlag indicating whether device should respond to multicast SNMP PDUs. When set 'true', the device will respond to multicast SNMP PDU's. Otherwise, the response is discarded.
MAC announceAddress1.3.6.1.4.1.11.2.14.1.6.2MacAddressread-writeWhen set to any MAC multicast address, the device will transmit three identical packets, each with the MAC source set to the device's MAC address, the MAC destination to the multi-cast address, the destination SAP is F8, and the destination HP XSAP is 165D. These packets will traverse other ICF devices, allowing them to learn the port connectivity of the multicasting device.
OCT mapAddress1.3.6.1.4.1.11.2.14.1.6.3OCTET STRINGread-writeWhen this object is set a map address search begins. If the address is detected on only one port, then the mapPort object is set to the port number on which the address was detected. This object has been deprecated.
INT mapState1.3.6.1.4.1.11.2.14.1.6.4INTEGERread-onlyThis object will be set to 'psNone' if the address set in the mapAddress object has not been received on any of the device's interface/ports. It will be set to 'psSingle' if the mapAddress has been detected on only one interface/port. It will be set to 'psMany' if the mapAddress has been detected on more than one interface/port. This object has been deprecated.
INT mapPort1.3.6.1.4.1.11.2.14.1.6.5INTEGERread-onlyThe port number on which the map address was detected. If map state is 'psNone' or 'psMany' then this object is not valid. This object has been deprecated.
IP ipSubnetMask1.3.6.1.4.1.11.2.14.1.6.6IpAddressread-onlyThis object is the IP subnet mask. This object is obsolete. Management applications should retrieve the ipAddrTable, which contains the ipAdEntNetMask object for each interface on the device.
icfEvent1.3.6.1.4.1.11.2.14.1.7
eventNotificationNode1.3.6.1.4.1.11.2.14.1.7.1
IP evtIpNotify1.3.6.1.4.1.11.2.14.1.7.1.1IpAddressread-writeThe network address of the manager node which is to receive the event notification trap. This functionality is currently duplicated in the authorized manager list.
OCT evtIpxNotify1.3.6.1.4.1.11.2.14.1.7.1.2OCTET STRINGread-writeThe IPX address of the manager node which is to receive the event notification trap. This functionality is currently duplicated in the authorized manager list.
evtTable1.3.6.1.4.1.11.2.14.1.7.2not-accessibleA list of event entries for event processing.
INT evtIndex1.3.6.1.4.1.11.2.14.1.7.2.1INTEGERread-onlyThe index value which uniquely identifies the event to which this entry is applicable.
INT evtArm1.3.6.1.4.1.11.2.14.1.7.2.2INTEGERread-writeThis object arms and disarms events. Events are implicitly rearmed, that is, once an event occurs, it is rearmed. Sets to the intrusionEvent instance of this object are ignored, since intrusion events are actually armed through the hubSecPtAlarmEnable object.
TIK evtTimeSinceOccurrence1.3.6.1.4.1.11.2.14.1.7.2.3TimeTicksread-onlyThis object specifies the number of centiseconds since this event last occurred.
evtThresholdTable1.3.6.1.4.1.11.2.14.1.7.3not-accessibleA list of event entries for event processing.
INT evthIndex1.3.6.1.4.1.11.2.14.1.7.3.1INTEGERread-onlyThe index value which uniquely identifies the event to which this entry is applicable.
INT evthArm1.3.6.1.4.1.11.2.14.1.7.3.2INTEGERread-writeThis object arms and disarms events. The notification node, the associated event object, threshold, hysteresis, and time interval should all be set before an event is armed. The objects do not need to be re-set if the existing values are acceptable. The device will refuse to arm an event with uninitialized objects. Once armed, if the threshold is met or exceeded during the event time interval, a trap PDU is sent to the eventNotificationNode. Subsequently, the monitored object must fall to or below the hysteresis before another trap can be sent via the threshold mechanism. The hysteresis may equal threshold. Events are implicitly rearmed, that is, once an event occurs, it is rearmed. Setting this object to 'on' will result in a genErr in any of the following cases: object not set; cannot set an event on this object; time interval not set; threshold not set.
OID evthObject1.3.6.1.4.1.11.2.14.1.7.3.3OBJECT IDENTIFIERread-writeThe data of this object is itself an OBJECT IDENTIFIER which selects the mib object and instance that is to be monitored for the event. Only types INTEGER and Counter are allowed.
INT evthThreshold1.3.6.1.4.1.11.2.14.1.7.3.4INTEGERread-writeThe threshold against which the variable specified in evthObject is tested over the time interval specified in the evthTimeInterval When the threshold is met or exceeded, the event is triggered. The event will not trigger again until the variable falls to or below the evthHysteresis value, and then meets or exceeds the threshold.
INT evthHysteresis1.3.6.1.4.1.11.2.14.1.7.3.5INTEGERread-writeThe low value which the variable specified in evthObject must fall to or below after exceeding evthThreshold before the event can re-occur when the threshold is met or exceeded.
TIK evthTimeInterval1.3.6.1.4.1.11.2.14.1.7.3.6TimeTicksread-writeThe time interval over which the variable specified in the evthObject is sampled.
TIK evthTimeSinceOccurrence1.3.6.1.4.1.11.2.14.1.7.3.7TimeTicksread-onlyThis object specifies the number of centiseconds since this event was last triggered.
linkTest1.3.6.1.4.1.11.2.14.1.8
linkTestAddress1.3.6.1.4.1.11.2.14.1.8.1
OCT linkTest802MacAddress1.3.6.1.4.1.11.2.14.1.8.1.1OCTET STRINGread-writeIf this object is set to the MAC address of a node to link test in the same PDU that sets linkTestRepetitions to a nonzero value, the link test performed will use IEEE 802 Test frames. Note that setting more than one of linkTest802MacAddress, linkTestIpAddress, and linkTestIpxAddress to a non-null value in the same PDU will result in a genErr.
IP linkTestIpAddress1.3.6.1.4.1.11.2.14.1.8.1.2IpAddressread-writeIf this object is set to the network address of a node to link test in the same PDU that sets linkTestRepetitions to a nonzero value, the link test performed will use ICMP Echo packets. Note that setting more than one of linkTest802MacAddress, linkTestIpAddress, and linkTestIpxAddress to a non-null value in the same PDU will result in a genErr.
OCT linkTestIpxAddress1.3.6.1.4.1.11.2.14.1.8.1.3OCTET STRINGread-writeIf this object is set to the IPX address of a node to link test in the same PDU that sets linkTestRepetitions to a nonzero value, the link test performed will use IPX diagnostic packets. Note that setting more than one of linkTest802MacAddress, linkTestIpAddress, and linkTestIpxAddress to a non-null value in the same PDU will result in a genErr.
INT linkTestRepetitions1.3.6.1.4.1.11.2.14.1.8.2INTEGERread-writeThe number of link tests that the device is to complete. When this object is set to a non-zero value, the linkTestSuccess object is zeroed and the device begins a link test using IEEE 802.2 Test frames, ICMP Echo packets, or IPX diagnostic packets depending on the address selected. Link test results are contained in the link test success object. This object's value decrements (to zero) as the test proceeds. The test may be canceled at any point by setting this object to 0.
INT linkTestSuccess1.3.6.1.4.1.11.2.14.1.8.3INTEGERread-onlyFor every successful link test, this counter is incremented. When link tests are completed, this counter contains the total number of successful tests.
TIK linkTestTimeout1.3.6.1.4.1.11.2.14.1.8.4TimeTicksread-writeThe time interval over which a link test response must be received, or the test is counted as failed.
icf8023MacTable1.3.6.1.4.1.11.2.14.1.9not-accessibleA list of icf8023Mac entries.
INT icf8023MacIndex1.3.6.1.4.1.11.2.14.1.9.1INTEGERread-onlyThe index value which uniquely identifies the port to which this entry is applicable. The port identified by a particular value of this index on a hub is the same port as identified by the same value of rptrPortIndex. Note that since this hub always has exactly 1 port group, there is no group index for this table. For a bridge, the port identified by a particular value of this index is the same port identified by the same value of ifIndex.
CTR icf8023MacInBroadcastPkts1.3.6.1.4.1.11.2.14.1.9.2Counterread-onlyCount of the broadcast packets received.
CTR icf8023MacOutBroadcastPkts1.3.6.1.4.1.11.2.14.1.9.3Counterread-onlyCount of the broadcast packets transmitted.
CTR icf8023MacInMulticastPkts1.3.6.1.4.1.11.2.14.1.9.4Counterread-onlyCount of the multicast packets received.
CTR icf8023MacOutMulticastPkts1.3.6.1.4.1.11.2.14.1.9.5Counterread-onlyCount of the multicast packets transmitted.
CTR icf8023MacRunts1.3.6.1.4.1.11.2.14.1.9.6Counterread-onlyThe number of media frames encountered that were too short (by ethernet/802.3 standards).
CTR icf8023MacGiants1.3.6.1.4.1.11.2.14.1.9.7Counterread-onlyThe number of media frames encountered that were too long (by ethernet/802.3 standards).
CTR icf8023MacMissedPktErrors1.3.6.1.4.1.11.2.14.1.9.8Counterread-onlyThe number of frames lost due to lack of resources (e.g. ring buffers, memory buffers, etc).
CTR icf8023MacExcessDeferrals1.3.6.1.4.1.11.2.14.1.9.9Counterread-onlyThe number of times a frame could not be sent due to excess deferrals because another node was transmitting continually.
CTR icf8023MacTotalMediaErrors1.3.6.1.4.1.11.2.14.1.9.10Counterread-onlyCount of all possible medium transmit and receive errors, such as crc, alignment, sequence, length, excess etc. The purpose of this object is to support aggregate LAN medium errors for event processing. Collisions and runts are not considered an error.
CTR icf8023MacSpuriousIntrs1.3.6.1.4.1.11.2.14.1.9.11Counterread-onlyThe number of times that the network interface for this port generated a spurious hardware interrupt. A non-zero value for this object indicates a potential hardware problem.
icfDownload1.3.6.1.4.1.11.2.14.1.10
icfDownloadAddress1.3.6.1.4.1.11.2.14.1.10.1
IP icfDownloadIpAddress1.3.6.1.4.1.11.2.14.1.10.1.1IpAddressread-writeThe IP address of the TFTP server to download firmware from.
OCT icfDownloadIpxAddress1.3.6.1.4.1.11.2.14.1.10.1.2OCTET STRINGread-writeThe IPX address of the TFTP server to download firmware from.
STR icfDownloadFilename1.3.6.1.4.1.11.2.14.1.10.2DisplayStringread-writeFilename and path of file to download (maximum length of 63 characters + NULL).
icfHub1.3.6.1.4.1.11.2.14.2
NTF linkBeatTrap1.3.6.1.4.1.11.2.14.2.0.3A linkBeatTrap(3) is device type specific to ICF hubs. It signifies that the hub hardware has detected a change of state in a port's link beat status. The current value of the port's link beat status is returned in the PDU.
NTF segmentationTrap1.3.6.1.4.1.11.2.14.2.0.4A segmentationTrap(4) is device type specific to ICF hubs. It signifies that the hub hardware has detected a change of state in a port's segmentation status. The current value of the port's segmentation status is returned in the PDU.
NTF backupLinkTrap1.3.6.1.4.1.11.2.14.2.0.5A backupLinkTrap(5) is device type specific to most ICF hubs. It signifies that there has been a change in state of rptrPortAdminStatus for a backup port on the hub. The new value of rptrPortAdminStatus is returned in the PDU. Note that in EtherTwist hubs with revision 'D' or earlier firmware, the SNMP-REPEATER-MIB is not supported. These hubs map hub ports to interfaces in the interfaces group of RFC1213-MIB. For these hubs, the variable binding list contains ifAdminStatus for the backup port on the hub instead of rptrPortAdminStatus. Backup links are not supported on the HP28688A hub.
NTF intrusionTrap1.3.6.1.4.1.11.2.14.2.0.6An intrusionTrap(6) is device type specific to EtherTwist hubs with revision 'E' firmware or later and AdvanceStack hubs. It signifies that a port security violation has been detected on a port which has the hubSecPtAlarmEnable flag set to 'enabled'. The MAC address of the intruder and the port on which the intrusion occurred are returned in the PDU.
NTF addressMovedTrap1.3.6.1.4.1.11.2.14.2.0.7An addressMovedTrap(7) is device type specific to EtherTwist hubs with revision 'E' firmware or later and AdvanceStack hubs. It signifies that a source MAC address which had been operating at one port has moved to a new port. The MAC address that moved, the group and port that the address moved from, and the group and port that the address moved to are returned in the PDU.
NTF newAddressTrap1.3.6.1.4.1.11.2.14.2.0.8A newAddressTrap(8) is device type specific to EtherTwist hubs with revision 'E' firmware or later and AdvanceStack hubs. It signifies that a new MAC address has been detected on one of the hub's ports. The instance of rptrAddrTrackLastSourceAddress for the port with the new address is returned in the PDU.
INT hubThinlanFault1.3.6.1.4.1.11.2.14.2.1INTEGERread-writeWhen set to 'true' this object causes the Fault LED to blink if the ThinLan Port is segmented. This object has been deprecated in favor of hpRptrThinlanFault.
hubGlobal1.3.6.1.4.1.11.2.14.2.2
CTR hubGlobalErrors1.3.6.1.4.1.11.2.14.2.2.1Counterread-onlyThis counter is incremented for each packet with an error received on any port. This counter does not include runts, as they are a normal media condition. This object has been deprecated in favor of hpRptrMonGlobalErrors.
CTR hubGlobalCollisions1.3.6.1.4.1.11.2.14.2.2.2Counterread-onlyThis counter is incremented for each collision between any two or more ports (or AUI) detected by the hub. This object has been deprecated in favor of rptrMonitorTransmitCollisions.
CTR hubGlobalPktFragments1.3.6.1.4.1.11.2.14.2.2.3Counterread-onlyThis counter is the sum of hubPortPktFragments for all ports. This object has been deprecated in favor of hpRptrMonGlobalFrames.
CTR hubGlobalRunts1.3.6.1.4.1.11.2.14.2.2.4Counterread-onlyThis counter is incremented for each runt frame received on any port. This object has been deprecated in favor of hpRptrMonGlobalRunts.
CTR hubGlobalGiants1.3.6.1.4.1.11.2.14.2.2.5Counterread-onlyThis counter is incremented for each giant frame received on any port. This object has been deprecated in favor of hpRptrMonGlobalFrameTooLongs.
CTR hubGlobalCrcErrors1.3.6.1.4.1.11.2.14.2.2.6Counterread-onlyThis counter is incremented for each frame with a CRC error received on any port. This object has been deprecated in favor of hpRptrMonGlobalFCSErrors.
CTR hubGlobalAlignmentErrors1.3.6.1.4.1.11.2.14.2.2.7Counterread-onlyThis counter is incremented for each frame with an alignment error received on any port. This object has been deprecated in favor of hpRptrMonGlobalAlignmentErrors.
CTR hubGlobalInOctets1.3.6.1.4.1.11.2.14.2.2.8Counterread-onlyThis counter is incremented for each octet received on any port. This object has been deprecated in favor of hpRptrMonGlobalOctets.
CTR hubGlobalInUcastPkts1.3.6.1.4.1.11.2.14.2.2.9Counterread-onlyThis counter is incremented for each unicast packet received on any port. This counter has been deprecated in favor of hpRptrMonGlobalUcastPackets.
CTR hubGlobalInNUcastPkts1.3.6.1.4.1.11.2.14.2.2.10Counterread-onlyThis counter is incremented for each non-unicast packet received on any port. This object has been deprecated in favor of hpRptrMonGlobalBcastPackets and hpRptrMonGlobalMcastPackets.
CTR hubGlobalInBroadcastPkts1.3.6.1.4.1.11.2.14.2.2.11Counterread-onlyThis counter is incremented for each broadcast packet received on any port. This object has been deprecated in favor of hpRptrMonGlobalBcastPackets.
hubPortTable1.3.6.1.4.1.11.2.14.2.3not-accessibleA list of hubPort entries.
INT hubPortIndex1.3.6.1.4.1.11.2.14.2.3.1INTEGERread-onlyThe index value which uniquely identifies the port to which this entry is applicable. The port identified by a particular value of this index is the same port as identified by the same value of rptrPortIndex.
CTR hubPortPktFragments1.3.6.1.4.1.11.2.14.2.3.2Counterread-onlyThis counter is incremented when a packet or packet fragment is encountered for a port instance. This object has been deprecated in favor of rptrMonitorPortReadableFrames.
CTR hubPortCollisions1.3.6.1.4.1.11.2.14.2.3.3Counterread-onlyThis counter is incremented when a port is involved in a collision. This object has been deprecated in favor of rptrMonitorPortCollisions.
INT hubPortSegmentation1.3.6.1.4.1.11.2.14.2.3.4INTEGERread-onlyThis is a flag which is 'true' if the port is currently segmented and 'false' otherwise. This object has been deprecated in favor of rptrPortAutoPartitionState.
INT hubPortLinkBeatStatus1.3.6.1.4.1.11.2.14.2.3.5INTEGERread-onlyThis is a flag which is 'true' if link beat is detected on the port and 'false' otherwise. The value of this variable will always be 'true' when the corresponding instance of hubPortLinkBeatEnable is 'false'. This object has been deprecated in favor of rpMauMediaAvailable.
INT hubPortLinkBeatEnable1.3.6.1.4.1.11.2.14.2.3.6INTEGERread-writeWhen this flag is set to 'true' the port's link beat is enabled and when set to 'false' it is disabled. This object has been deprecated in favor of hpRptrPtLinkbeatEnable.
MAC hubPortMacAddress1.3.6.1.4.1.11.2.14.2.3.7MacAddressread-onlyEach port maintains the MAC address of the node currently attached to it. This address is valid only when the port state flag is set to 'psSingle'. This object has been deprecated in favor of rptrAddrTrackNewLastSrcAddress.
INT hubPortAddressState1.3.6.1.4.1.11.2.14.2.3.8INTEGERread-writeThe port state object may take on three values. 'psNone' means no packets have been received on the port. 'psSingle' means all packets received on the port have originated from a single MAC address. 'psMany' means that packets originating from more than one node have been received on the port. To (re)start a search for a MAC address set the port state to 'psNone'.
INT hubPortPolarityReversed1.3.6.1.4.1.11.2.14.2.3.9INTEGERread-onlyThis object is used to indicate that the hub port was wired with the positive/negative polarity of its transmit and receive pairs reversed. Note that the port will continue to operate in this state, with the hub inverting the polarity internally. This object has been deprecated in favor of hpRptrPtPolarityReversed.
INT hubPortLateEventDisable1.3.6.1.4.1.11.2.14.2.3.10INTEGERread-onlyThis object indicates that the hub port was disabled as a result of excessive late collisions being caused by the end node attached to this port. This flag is cleared when the port is reenabled by setting rptrPortAdminStatus to 'enabled'.
hubBitmaps1.3.6.1.4.1.11.2.14.2.4
OCT hubPortsOperStatus1.3.6.1.4.1.11.2.14.2.4.1OCTET STRINGread-onlyThe hubPortsOperStatus is a bit map of the state of all hub ports. The object has a 1 bit for each port that is enabled, not segmented, and linkbeat is detected. Ports on which these conditions are not true have a 0 bit. The bits are placed into the OCTET STRING in the following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are undefined. This object has been deprecated in favor of hpRptrGrpPortsAdminStatus.
TIK hubAddressTableMaxAge1.3.6.1.4.1.11.2.14.2.5TimeTicksread-writeThe hubAddressTableMaxAge is the time beyond which an inactive MAC address will be removed from the hubPortMacAddress table and the hubAddressTable. Although hubAddressTableMaxAge is specified in units of 10ms time ticks, the actual resolution of this timer is 10 seconds. A value of 65535000 indicates no aging shall take place.
hubAddressTable1.3.6.1.4.1.11.2.14.2.6not-accessibleA list of entries present in the hub address table.
INT hubAddressIndex1.3.6.1.4.1.11.2.14.2.6.1INTEGERread-onlyThe index value which uniquely identifies the chunk to which this entry is applicable.
OCT hubAddressChunk1.3.6.1.4.1.11.2.14.2.6.2OCTET STRINGread-onlyThe hubAddressChunk object returns an opaque chunk of the address table. Each chunk can be interpreted as an array of records in the form: mac address [6 bytes], port number [2 bytes], inactivity time [4 bytes] On a Get, the returned chunk can include empty (unused) entries. Instances are chunk numbers, which start at 1 and go to 52. Each chunk can hold 34 addresses. A returned chunk might look like: Address Port Inactivity Time 080009001234 1 0 080009002345 2 10000 080009003456 1 20000 000000000000 1 0 080009009876 EMPTY 0 080009004567 EMPTY 15000 . . . 080009005678 EOL 959000 A value of EMPTY in the Port field indicates an unused (i.e. aged out) entry in the table. When the EOL (End Of List) bit is set in the Port field, that entry is the last entry in the table. It is possible for EOL to be seen in any entry. EOL (0x4000) and EMPTY (0x8000) are bit masks which are ORed with the port number in the port field of the entry. It is possible for both the EOL and EMPTY bits to be set in the same entry. The remainder of the chunk after the EOL entry will be zeroed. The inactivityTime and Address fields are meaningless if the EMPTY bit is set in the Port field. In this case, inactivityTime and Address are not guaranteed to be zeroed. The Manager may start with any chunk it likes and request the chunks in any order. It may perform multiple requests for the same chunk. The agent does not save state from previous requests. A request of chunk #1 would return the contents of the first 34 address table entries, whether they are all full, all empty, or some full and the rest empty. A request of chunk #2 will return entries #35 through #68. And so on. The address table can change between Get requests. An address' location can change, or an address could age out and then be added back in at a different location in the table. Thus, the Manager could see the address twice in the table.
INT hubNumBkpLinks1.3.6.1.4.1.11.2.14.2.7INTEGERread-onlyThe number of backup links configurable on this hub.
hubBkpLinkTable1.3.6.1.4.1.11.2.14.2.8not-accessibleA list of backup link configuration entries. For a given backup link, the hub will periodically send a test packet to the device at the end of the link. If there are no responses (the number is configurable), the hub will enable the backup port and disable the primary port. After the primary link is fixed, the user must turn the primary port on to resume normal operation. At any time, the management station can look at rptrPortAdminStatus for the backup port to determine if it is currently in use. The backup link algorithm enables and disables the backup port by modifying rptrPortAdminStatus for that port. After the backup port has been enabled by the backup link algorithm, if the primary port is subsequently enabled via the hub console port or by a set of rptrPortAdminStatus, the backup port will be turned off and the periodic test packets will begin again. When the backup link objects are set, the backup port will be turned off, the primary port will be turned on, and the periodic test packets will be sent. The time between test packets is configurable by setting hubBackupTestTime. The number of failures needed to switch to the backup link is configured by setting hubBackupConsecutiveFails. The backup link function can be turned off by setting hubBackupPort to 0. All five of the backup link objects must be set together in a single PDU except for the case of setting hubBackupPort to 0, in which case, the hubBackupPort can be set without setting the other objects. Currently, the size of the backup link table is one; future releases may provide the ability to monitor more than one backup link.
INT hubBkpLinkIndex1.3.6.1.4.1.11.2.14.2.8.1INTEGERread-onlyThe index value which uniquely identifies the backup link configuration entry to which the instance is applicable.
INT hubBackupPort1.3.6.1.4.1.11.2.14.2.8.2INTEGERread-writeThe port number of the backup link. Setting this object to zero removes the backup link configuration.
INT hubPrimaryPort1.3.6.1.4.1.11.2.14.2.8.3INTEGERread-writeThe port number of the primary link. It can only be set to zero if the hubBackupPort is also zero.
OCT hubBackupAddress1.3.6.1.4.1.11.2.14.2.8.4OCTET STRINGread-writeThe MAC address of the device at the other end of the primary link which will respond to the periodic test packets sent by this hub.
TIK hubBackupTestTime1.3.6.1.4.1.11.2.14.2.8.5TimeTicksread-writeThe frequency, in time ticks, between sending the periodic test packets. The actual resolution of this timer is in seconds. The test packet response timeout is fixed at 500ms.
INT hubBackupConsecutiveFails1.3.6.1.4.1.11.2.14.2.8.6INTEGERread-writeThe number of test packet failures which will cause the hub to switch to the backup link (i.e., backup port turned on, primary port turned off). A value of one is generally not recomended and will cause the backup link to be enabled upon the first failure.
INT hubSqeEnabled1.3.6.1.4.1.11.2.14.2.9INTEGERread-onlyWhen 'true', this flag indicates that SQE has been detected for the last ten agent transmits and there is a high probability that the SQE switch on the transceiver attached to the AUI port is set to Enabled, when it should be Disabled. This object has been deprecated in favor of hpRptrSqeEnabled.
hubSecurity1.3.6.1.4.1.11.2.14.2.10
hubSecurePortTable1.3.6.1.4.1.11.2.14.2.10.1not-accessibleTable containing security configuration for each port.
hubSecurePortEntry1.3.6.1.4.1.11.2.14.2.10.1.1not-accessibleAn entry in the hubSecurePortTable, containing the security configuration for a single port.
INT hubSecPtGroupIndex1.3.6.1.4.1.11.2.14.2.10.1.1.1INTEGERread-onlyThis object identifies the group containing the port for which this entry contains security configuration information.
INT hubSecPtPortIndex1.3.6.1.4.1.11.2.14.2.10.1.1.2INTEGERread-onlyThis object identifies the port within the group for which this entry contains security configuration information.
OCT hubSecPtSecurityAddress1.3.6.1.4.1.11.2.14.2.10.1.1.3OCTET STRINGread-writeThe desired authorized MAC address for this port. This can be either a regular station address to configure a specific address, or it can be one of the following special values to specify the address learning method: FFFF-FFFF-FFFE: learnOnce. First source MAC address heard on this port becomes the authorized address. Setting this value initiates learning of a new authorized address. When a new authorized address is learned, it will be stored in nonvolatile memory. This variable will return learnOnceConditionally to a GET operation after it has been set to this value. FFFF-FFFF-FFFD: learnOnceConditionally. This option will initiate learning of a new authorized address only if the previous hubSecPtSecurityAddress was set to a specific address or learnContinuous. No action will be performed if the previous value was already learnOnceConditionally. FFFF-FFFF-FFFC: learnContinuous. Any address heard becomes the new authorized address. When a new address is learned, it may cause an alarm, but it does not store anything in nonvolatile memory.
OCT hubSecPtAuthorizedAddress1.3.6.1.4.1.11.2.14.2.10.1.1.4OCTET STRINGread-onlyThe MAC address of the station authorized to be on this port. This address could either have been configured by specifying a regular station address for hubSecPtSecurityAddress, or it could have been learned by the agent if hubSecPtSecurityAddress was set to one of the special values listed above. Once the agent has learned an authorized address, it will be saved across powerfails, unless the agent was configured for learnContinuous mode.
INT hubSecPtPreventEavesdrop1.3.6.1.4.1.11.2.14.2.10.1.1.5INTEGERread-writeIf enabled, unicast packets not addressed to the authorized address for this port will be scrambled.
INT hubSecPtAlarmEnable1.3.6.1.4.1.11.2.14.2.10.1.1.6INTEGERread-writeIf enabled, the agent will generate an intrusionTrap if a packet is received on this port with a source MAC address that is different from the hubSecPtAuthorizedAddress for this port.
INT hubSecPtIntrusionFlag1.3.6.1.4.1.11.2.14.2.10.1.1.7INTEGERread-writeThis flag indicates if an intrusion has occurred on this port. The Security LED on the hub will blink if any instance of this flag has the value intrusion. Setting this flag to noIntrusion will turn off the Security LED if no other ports have this flag set to intrusion. An intrusion will only cause an alarm and an intrusion log entry if this flag is equal to noIntrusion.
hubIntruderLogTable1.3.6.1.4.1.11.2.14.2.10.2not-accessibleThis table contains a record of the twenty most recent port security violations. The first entry in the table is the oldest.
hubIntruderLogEntry1.3.6.1.4.1.11.2.14.2.10.2.1not-accessibleA row in the hubIntruderLogTable containing information about a single port security violation.
INT hubIntruderIndex1.3.6.1.4.1.11.2.14.2.10.2.1.1INTEGERread-onlyThe index of this entry in the intruder log table. Index 1 will always contain the oldest entry. If the table is full when a new intrusion occurs, the new entry becomes index 20, and all earlier entries are shifted down by one entry, removing the old index 1.
INT hubIntruderGroup1.3.6.1.4.1.11.2.14.2.10.2.1.2INTEGERread-onlyThis object identifies the group containing the port on which this intrusion occurred.
INT hubIntruderPort1.3.6.1.4.1.11.2.14.2.10.2.1.3INTEGERread-onlyThis object identifies the port within the group on which this intrusion occurred. A port number of zero indicates that this entry is unused and the values for the other variables in this entry are undefined.
OCT hubIntruderAddress1.3.6.1.4.1.11.2.14.2.10.2.1.4OCTET STRINGread-onlyThis object contains the source MAC address of the intruder.
TIK hubIntruderTime1.3.6.1.4.1.11.2.14.2.10.2.1.5TimeTicksread-onlyThe value of sysUpTime when the intrusion occurred. This will be zero if the agent has been reset since the intruder was detected, since sysUpTime could be misinterpreted in that case.
hubAddressMoveLogTable1.3.6.1.4.1.11.2.14.2.11not-accessibleA log of the 20 most recent times that the agent detected that a source MAC address which had been heard on one port had moved to a different port.
hubAddressMoveLogEntry1.3.6.1.4.1.11.2.14.2.11.1not-accessibleA row in the hubAddressMoveLogTable containing information about a single address movement.
INT hubAddrMoveIndex1.3.6.1.4.1.11.2.14.2.11.1.1INTEGERread-onlyThe index of this entry in the address movement log table. Index 1 will always contain the oldest entry. If the table is full when a new address movement occurs, the new entry becomes index 20, and all earlier entries are shifted down by one entry, removing the old index 1.
OCT hubAddrMoveAddress1.3.6.1.4.1.11.2.14.2.11.1.2OCTET STRINGread-onlyThe MAC address of the station that moved to a new port.
INT hubAddrMoveOldGroup1.3.6.1.4.1.11.2.14.2.11.1.3INTEGERread-onlyThe group containing the port on which this address had been operating before it moved.
INT hubAddrMoveOldPort1.3.6.1.4.1.11.2.14.2.11.1.4INTEGERread-onlyThe port within the group on which this address had been operating before it moved.
INT hubAddrMoveNewGroup1.3.6.1.4.1.11.2.14.2.11.1.5INTEGERread-onlyThe group containing the port that the address moved to.
INT hubAddrMoveNewPort1.3.6.1.4.1.11.2.14.2.11.1.6INTEGERread-onlyThe port within the group that the address moved to.
INT hubLateEventMonitor1.3.6.1.4.1.11.2.14.2.12INTEGERread-writeThis object configures the late event monitoring functionality for the hub. This mode periodically samples the rptrMonitorPortLateEvents value for each port. If the agent detects excessive late events on a port, the port will be disabled by setting the rptrPortAdminStatus for that port to 'disabled', and the hubPortLateEventDisable flag for that port will be set to 'true'. This mode is 'off' by default. Setting it to 'onSingle' enables the mode for all non-cascaded hub ports. Setting it to 'onAll' enables the mode for all hub ports, including cascaded ports.
icfBridge1.3.6.1.4.1.11.2.14.3
NTF stpTrap1.3.6.1.4.1.11.2.14.3.0.3A stpTrap(3) is device type specific to ICF bridges. It signifies that the Spanning Tree entity in the bridge has detected a change of state to either Blocking or Forwarding.
NTF temperatureTrap1.3.6.1.4.1.11.2.14.3.0.4A temperatureTrap(4) is device type specific to ICF bridges. It signifies that the bridge hardware has detected an overheated condition.
INT operationalState1.3.6.1.4.1.11.2.14.3.1INTEGERread-writeThis object controls the forwarding nature of the bridge. In the Learning state the bridge will learn new MAC addresses, and it ages out older MAC addresses. Statically configured addresses are discarded (they do not age). In the Secure state, the bridge will not learn new MAC addresses. Statically configured addresses are forwarded (they do not age).
TIK forwardDbMaxAge1.3.6.1.4.1.11.2.14.3.2TimeTicksread-writeThe value of this object controls how long a MAC address stays in the forwarding database. See 802.1d, section 3.9.2 'Dynamic Entries'.
addressTable1.3.6.1.4.1.11.2.14.3.3not-accessibleA list of address entries.
INT addressIndex1.3.6.1.4.1.11.2.14.3.3.1INTEGERread-onlyThe index value which uniquely identifies the chunk to which this entry is applicable.
OCT addressChunk1.3.6.1.4.1.11.2.14.3.3.2OCTET STRINGread-writeThis object returns an opaque chunk of the address table. The instance specifies a chunk of the address table. Each chunk can be interpreted as an array of 41 records of the form: { macAddress[6bytes], port number[2bytes], permanence[2bytes] }. Address Port Perm 00 080009001234 1 Dynamic(0x0000) 01 080009002345 2 Dynamic(0x0000) 02 000000000000 EMPTY(0x8000) Dynamic(0x0000) 03 080009003456 1 Dynamic(0x0000) 04 000000000000 1 Dynamic(0x0000) 05 080009009876 EMPTY(0x8000) Dynamic(0x0000) 06 080009004567 EMPTY(0x8000) Static(0x0008) 07 080009041d08 ... ... ... 40 080009005678 EOL(0x4000) Permanent(0x0000) A value of EMPTY in the Port field indicates an aged out table entry. A value of EOL in the Port field indicates that it is the last entry in the table. Of course, EOL will only be seen in the last entry. EOL and EMPTY are AND-able bit fields. The Disposition and Address are meaningless if Port is EMPTY. When instance=1 is used on a Set, the agent clears the table prior to setting any addresses. On subsequent Sets, the agent adds the specified addresses. If a Set starts at instance > 1, the specified addresses will be added to the table without first clearing the table. Addresses are already in the table are deleted and then readded.
brgPortTable1.3.6.1.4.1.11.2.14.3.4not-accessibleA list of brgPort entries.
INT brgPortIndex1.3.6.1.4.1.11.2.14.3.4.1INTEGERread-onlyThe index value which uniquely identifies the interface/port to which this entry is applicable. The interface/port identified by a particular value of this index is the same interface/port as identified by the same value of ifIndex.
CTR brgPortCacheHits1.3.6.1.4.1.11.2.14.3.4.2Counterread-onlyCount of the successful cache matches when looking up a destination MAC address.
CTR brgPortCacheMisses1.3.6.1.4.1.11.2.14.3.4.3Counterread-onlyCount of the unsuccessful cache matches when looking up a destination MAC address.
CTR brgPortForwardedPkts1.3.6.1.4.1.11.2.14.3.4.4Counterread-onlyCount of the packets received on this port and forwarded to the other port.
CTR brgPortFilteredPkts1.3.6.1.4.1.11.2.14.3.4.5Counterread-onlyCount of the frames that were received on this port and filtered.
wildcardTable1.3.6.1.4.1.11.2.14.3.5not-accessibleA list of wildcard entries.
INT wildcardIndex1.3.6.1.4.1.11.2.14.3.5.1INTEGERread-onlyThe index value which uniquely identifies the interface/port to which this entry is applicable. The interface/port identified by a particular value of this index is the same interface/port as identified by the same value of ifIndex.
OCT wildcardFilter1.3.6.1.4.1.11.2.14.3.5.2OCTET STRINGread-writeThis object contains the binary value used to filter frames. The data in the frame at the offset specified by the Wildcard offsets is XOR'ed with this object after AND'ing with the Wildcard Mask. If zero result occurs, the packet is discarded (filtered). Suppose the user specifies the following values: data: 11001010 10101010 10101010 10101010 mask: 11100000 00000000 00000000 00000000 filter: 11100000 00000000 00000000 00000000 AND'ing data with the mask gives: 11000000 00000000 00000000 00000000 XOR'ing that value with the filter gives: 00100000 00000000 00000000 00000000 The non-zero result indicates no match (don't discard). Another example: data: 10011010 10101010 10101010 10101010 mask: 10010000 00000000 00000000 00000000 filter: 10010000 00000000 00000000 00000000 AND'ing data with the mask gives: 10010000 00000000 00000000 00000000 XOR'ing that value with the filter gives: 00000000 00000000 00000000 00000000 A zero result indicates a match, so we discard (filter) the packet. The filter AND'ed with the mask must equal the filter. This is an example of a legal filter/mask pair: filter: 00010000 00000000 00000000 00000000 mask: 10010000 00000000 00000000 00000000 AND'ed: 00010000 00000000 00000000 00000000 (equals filter) Another way of saying this: if a mask bit is zero, the corresponding filter bit must be zero. The following would be an illegal pair: filter: 01110000 00000000 00000000 00000000 mask: 10010000 00000000 00000000 00000000 AND'ed: 00010000 00000000 00000000 00000000 ( != filter)
OCT wildcardMask1.3.6.1.4.1.11.2.14.3.5.3OCTET STRINGread-writeThis object indicates which portion of the wildcardFilter is to be used in filtering. The data in the frame at the offset specified by Wildcard offsets is AND'ed with this object. The result is XOR'ed with the Wildcard Filter object. If a zero result is obtained, the packet is discarded. If an all-zeros wildcardMask is specified, a genErr is returned. Also, see mask/filter constraints in the description of the wildcardFilter object.
INT wildcardOffset1.3.6.1.4.1.11.2.14.3.5.4INTEGERread-writeIndicates the position in a received frame which is to have the Wildcard Mask/Filter applied. The indicated packet byte is aligned with the 0th byte of the wildcard mask/filter held in network byte order. The MAC destination address starts at byte position (wildcardOffset) zero. The wildcardOffset must fall on a 2-byte boundary, 0,2,4,...,1512 (violations of this constraint result in a genErr). Filters can be aligned on non 2-byte boundaries through use of the wildcardUserOffset.
INT wildcardUserOffset1.3.6.1.4.1.11.2.14.3.5.5INTEGERread-writeThis value is a byte offset from the beginning of the packet. If this offset is such that any portion of the filter extends past the end of the packet (for wildcard filtering purposes, the FCS is part of the packet), then the filter is considered not to match, and the packet is not filtered. For a particular filter, the wildcardUserOffset must be greater than or equal to the wildcardOffset. wildcardUserOffset must be between 0 and 1514, inclusive. The wildcardUserOffset, wildcardOffset pair must conform to one of the following four relationships and also be subject to the range restrictions listed above. For n = 0,..,378 Offset 4n 4n 4n 4n+2 UserOffset 4n 4n+1 4n+2 4n+3 As an example, consider four examples in the following table for locating the filter at or near the beginning of a packet: - 6 filter/mask bytes - - desired - 0 1 2 3 4 5 6 - position - A|f/m0 f/m1 f/m2 f/m3 00 00 00 |0,4,8,12,... B| 00 f/m0 f/m1 f/m2 f/m3 00 00 |1,5,9,13,... C| 00 00 f/m0 f/m1 f/m2 f/m3 00 |2,6,10,14,... D| 00 00 00 f/m0 f/m1 f/m2 f/m3|3,7,11,15,... Example A corresponds to a UserOffset/Offset pair such as 0/0 (4n/4n). Example B represents a pair such as 0/1 (4n/4n+1). Example C is 0/2 (4n/4n+2). Finally, example D is 2/3 (4n+2/4n+3). If any of the above constraints is not honored, the SET Response will indicate genErr.
INT wildcardArm1.3.6.1.4.1.11.2.14.3.5.6INTEGERread-writeThis object arms (enables) the Wildcard Filter provided all of the other wildcard objects have been set to proper values. To disarm a wildcard, only the wildcardArm object need be set.
stp1.3.6.1.4.1.11.2.14.3.6
OCT stpBridgeId1.3.6.1.4.1.11.2.14.3.6.1OCTET STRINGread-onlyA 64 bit binary bridge id composed of bridge priority and the bridge's mac address fields. see: IEEE 802.1(d) 6.8.1.1.3(1), 4.5.3.7
TIK stpTopoChangeTime1.3.6.1.4.1.11.2.14.3.6.2TimeTicksread-onlyThe time since the last topology change. see: IEEE 802.1(d) 6.8.1.1.3(2), 4.5.3.12
CTR stpTopoNumChanges1.3.6.1.4.1.11.2.14.3.6.3Counterread-onlyThe number of topo changes since initialization of STP. see: IEEE 802.1(d) 6.8.1.1.3(3)
INT stpTopoChange1.3.6.1.4.1.11.2.14.3.6.4INTEGERread-onlyA 1 bit flag broadcast by the root bridge indicating that a topology change is underway, and Stp bridges should use short term aging. see: IEEE 802.1(d) 6.8.1.1.3(4), 4.5.3.12
OCT stpDesignatedRoot1.3.6.1.4.1.11.2.14.3.6.5OCTET STRINGread-onlyThe binary bridge id that this bridge believes to be the root bridge for the bridged Lan. see: IEEE 802.1(d) 6.8.1.1.3(5), 4.5.3.1
INT stpRootCost1.3.6.1.4.1.11.2.14.3.6.6INTEGERread-onlyThe cost of the path to the root bridge from this bridge; equal to the sum of the designated cost and the path cost held for the root port. see: IEEE 802.1(d) 6.8.1.1.3(6), 4.5.3.2
INT stpRootPort1.3.6.1.4.1.11.2.14.3.6.7INTEGERread-onlyThe port id that this bridge believes to be the root bridge's root port for the bridged Lan. see: IEEE 802.1(d) 6.8.1.1.3(7), 4.5.3.3
INT stpCurrentMaxAge1.3.6.1.4.1.11.2.14.3.6.8INTEGERread-onlyThe Max Age value received from the Root Bridge (in seconds); the Stp is currently using the value. see: IEEE 802.1(d) 6.8.1.1.3(8), 4.5.3.4
INT stpCurrentHelloTime1.3.6.1.4.1.11.2.14.3.6.9INTEGERread-onlyThe Hello time value received from the Root Bridge (in seconds); the Stp records the value. see: IEEE 802.1(d) 6.8.1.1.3(9), 4.5.3.5
INT stpCurrentForwardDelay1.3.6.1.4.1.11.2.14.3.6.10INTEGERread-onlyThe forward delay value received from the Root Bridge (in seconds); the Stp is currently using the value. see: IEEE 802.1(d) 6.8.1.1.3(10), 4.5.3.6
INT stpMaxAge1.3.6.1.4.1.11.2.14.3.6.11INTEGERread-writeThe maximum age allowed of Config information for a port before a bridge will attempt to become the root (in seconds). Transmitted by this bridge when it is, or is attempting to become the root. see: IEEE 802.1(d) 6.8.1.1.3(11), 6.8.1.2.2(1), 4.5.3.8
INT stpHelloTime1.3.6.1.4.1.11.2.14.3.6.12INTEGERread-writeThe time between Config packet transmission when this bridge is, or is attempting to become the root (in seconds). Transmitted by this bridge when it is, or is attempting to become the root. see: IEEE 802.1(d) 6.8.1.1.3(12), 6.8.1.2.2(2), 4.5.3.9
INT stpForwardDelay1.3.6.1.4.1.11.2.14.3.6.13INTEGERread-writeThe time spent in the Listening and Learning states used when this bridge is, or is attempting to become the root (in seconds). Transmitted by this bridge when it is, or is attempting to become the root. see: IEEE 802.1(d) 6.8.1.1.3(13), 6.8.1.2.2(3), 4.5.3.10
INT stpPriority1.3.6.1.4.1.11.2.14.3.6.14INTEGERread-writeThe upper 16 bits of the 64 bit BridgeId composed of priority and the bridge's mac address fields. see: IEEE 802.1(d) 6.8.1.2.2(4), 4.5.3.7
stpPortTable1.3.6.1.4.1.11.2.14.3.6.15not-accessibleA list of stpPort entries.
INT stpPortIndex1.3.6.1.4.1.11.2.14.3.6.15.1INTEGERread-onlyThe index value which uniquely identifies the port to which this entry is applicable. The port identified by a particular value of this index is the same interface/port as identified by the same value of ifIndex. Not an IEEE 802.1(d) reqmt.
INT stpPortState1.3.6.1.4.1.11.2.14.3.6.15.2INTEGERread-writeThe state of a port on a 2 port bridge is really the state of the bridge itself. Management is only allowed to set this object to 'stpDisabled' or 'stpBlocking'. Setting the object to 'stpDisabled' will turn off spanning tree only if the state is not 'stpBlocking' (to prevent loops). Setting the object to 'stpBlocking' will turn on spanning tree only if it was previously disabled. see: IEEE 802.1(d) 6.8.2.1.3(2), 4.4, 4.5.5.2
INT stpPortId1.3.6.1.4.1.11.2.14.3.6.15.3INTEGERread-onlyThe 16 bit port id composed of priority and the port's unique id fields. see: IEEE 802.1(d) 6.8.2.1.3(3), 4.5.5.1
INT stpPortPathCost1.3.6.1.4.1.11.2.14.3.6.15.4INTEGERread-writeThe contribution of the path through this port, when the port is the root port, to the total cost of the path to the root for this bridge. see: IEEE 802.1(d) 6.8.2.1.3(4), 6.8.2.3.2(2), 4.5.5.3
OCT stpPortRootId1.3.6.1.4.1.11.2.14.3.6.15.5OCTET STRINGread-onlyThe bridge id that this port believes to be the root bridge for the bridged Lan. see: IEEE 802.1(d) 6.8.2.1.3(5), 4.5.5.4
INT stpPortDesignatedCost1.3.6.1.4.1.11.2.14.3.6.15.6INTEGERread-onlyThe cost of the path to the root offered by the Designated Port on the LAN to which this Port is attached. see: IEEE 802.1(d) 6.8.2.1.3(6), 4.5.5.5
OCT stpPortDesignatedBridge1.3.6.1.4.1.11.2.14.3.6.15.7OCTET STRINGread-onlyThe Bridge Id of the designated bridge for the LAN associated with the port. see: IEEE 802.1(d) 6.8.2.1.3(7), 4.5.5.6
INT stpPortDesignatedPort1.3.6.1.4.1.11.2.14.3.6.15.8INTEGERread-onlyThe port id of the bridge believed to be the designated port of the LAN associated with the port. see: IEEE 802.1(d) 6.8.2.1.3(8), 4.5.5.7
INT stpPortPriority1.3.6.1.4.1.11.2.14.3.6.15.9INTEGERread-writeThe upper 8 bits of the 16 bit PortId composed of priority and the port's unique id fields. see: IEEE 802.1(d) 6.8.2.3.2(3), 4.5.5.1
hdlcErrorTable1.3.6.1.4.1.11.2.14.3.7not-accessibleA list of hdlcError entries.
INT hdlcErrorIndex1.3.6.1.4.1.11.2.14.3.7.1INTEGERread-onlyThe index value which uniquely identifies the port to which this entry is applicable. The port identified by a particular value of this index is the same interface/port as identified by the same value of ifIndex. IcfBridge.HP28674: There is only one 'real' instance of this object on port 2.
CTR hdlcErrorIndications1.3.6.1.4.1.11.2.14.3.7.2Counterread-onlyErrors occurring during information transfer which required instruction from CPU for recovery. This is a serious link problem. The local node will either reset or disconnect after receiving this message.
CTR hdlcT1Timeouts1.3.6.1.4.1.11.2.14.3.7.3Counterread-onlyThe number of times the retransmission timer (x25T1Timer) timed out.
CTR hdlcMissedPackets1.3.6.1.4.1.11.2.14.3.7.4Counterread-onlyCount of the frames lost by the receiver because there wasn't a receive buffer.
CTR hdlcRcvOverruns1.3.6.1.4.1.11.2.14.3.7.5Counterread-onlyCount of the number of times the reciever's FIFO was full when the receiver was ready to put new data into the FIFO.
CTR hdlcXmtUnderruns1.3.6.1.4.1.11.2.14.3.7.6Counterread-onlyCount of the number of times the transmitter has aborted a frame transmission because data was late from memory.
CTR hdlcProviderLostPrimitives1.3.6.1.4.1.11.2.14.3.7.7Counterread-onlyCount of the number of lost control frames due to 802.3 priority processing on receive.
CTR hdlcRuntFrameReceives1.3.6.1.4.1.11.2.14.3.7.8Counterread-onlyCount of the HDLC frames received that were less than the minimum legal HDLC size.
CTR hdlcGiantFrameReceives1.3.6.1.4.1.11.2.14.3.7.9Counterread-onlyCount of the HDLC frames received that were larger than the maximum legal size that can be sent on the 802.3 LAN link.
CTR hdlcBadFrameReceives1.3.6.1.4.1.11.2.14.3.7.10Counterread-onlyCount of the sum of: HDLC frames with bad checksum, and misaligned HDLC frames.
CTR hdlcRejectFrameReceives1.3.6.1.4.1.11.2.14.3.7.11Counterread-onlyCount of the HDLC reject frames received.
CTR hdlcRejectFrameSends1.3.6.1.4.1.11.2.14.3.7.12Counterread-onlyCount of the HDLC reject frames sent.
CTR hdlcFrameRejectFrameRecs1.3.6.1.4.1.11.2.14.3.7.13Counterread-onlyCount of the HDLC frame reject frames (FRMR) received.
hdlcLocalTable1.3.6.1.4.1.11.2.14.3.8not-accessibleA list of hdlcLocal entries.
INT hdlcLocalIndex1.3.6.1.4.1.11.2.14.3.8.1INTEGERread-onlyIndex into Hdlc local statistics table on a per port basis. bridge.HP28674: There is only one 'real' instance of this object on port 2.
CTR hdlcLocalResetRequests1.3.6.1.4.1.11.2.14.3.8.2Counterread-onlyCount of local HDLC requests to reset current logical link.
CTR hdlcLocalResetConfirms1.3.6.1.4.1.11.2.14.3.8.3Counterread-onlyCount of local HDLC node link reset confirmations.
CTR hdlcLocalConnectRequests1.3.6.1.4.1.11.2.14.3.8.4Counterread-onlyCount of local HDLC node attempts to establish logical link.
CTR hdlcLocalConnectConfirms1.3.6.1.4.1.11.2.14.3.8.5Counterread-onlyCount of local HDLC node connect request acceptances.
CTR hdlcLocalDisconnectRequests1.3.6.1.4.1.11.2.14.3.8.6Counterread-onlyCount of local HDLC node disconnect requests.
CTR hdlcLocalDisconnectConfirms1.3.6.1.4.1.11.2.14.3.8.7Counterread-onlyCount of local HDLC node disconnects granted.
INT hdlcLocalState1.3.6.1.4.1.11.2.14.3.8.8INTEGERread-onlyCurrent local HDLC operational state.
INT hdlcLocalAddress1.3.6.1.4.1.11.2.14.3.8.9INTEGERread-writeThe local HDLC address during communication with the remote node. This object is valid only if a brouter is on the remote end of the HDLC link. It can only be set to one of the two values: 'hdlcDTEAddress' or 'hdlcDTEAddress'. Furthermore, the setting of this object must be different from the setting of the hdlcRemoteHdlcAddress object. This object, along with hdlcRemoteAddress and hdlcRemoteNodeId, constitute a superobject. See hdlcRemoteNodeId for more details.
INT hdlcLocalPhase1.3.6.1.4.1.11.2.14.3.8.10INTEGERread-onlyCurrent HDLC operational phase.
hdlcRemoteTable1.3.6.1.4.1.11.2.14.3.9not-accessibleA list of hdlcRemote entries.
INT hdlcRemoteIndex1.3.6.1.4.1.11.2.14.3.9.1INTEGERread-onlyIndex into Hdlc remote statistics table on a per port basis. bridge.HP28674: There is only one 'real' instance of this object on port 2.
CTR hdlcRemoteResetRequests1.3.6.1.4.1.11.2.14.3.9.2Counterread-onlyCount of remote HDLC requests to reset current logical link.
CTR hdlcRemoteResetConfirms1.3.6.1.4.1.11.2.14.3.9.3Counterread-onlyCount of remote HDLC node link reset confirmations.
CTR hdlcRemoteConnectRequests1.3.6.1.4.1.11.2.14.3.9.4Counterread-onlyCount of remote HDLC node attempts to establish logical link.
CTR hdlcRemoteConnectConfirms1.3.6.1.4.1.11.2.14.3.9.5Counterread-onlyCount of remote HDLC node connect request acceptances.
CTR hdlcRemoteDisconnectRequests1.3.6.1.4.1.11.2.14.3.9.6Counterread-onlyCount of remote HDLC node disconnect requests.
INT hdlcRemoteState1.3.6.1.4.1.11.2.14.3.9.7INTEGERread-onlyCurrent remote HDLC operational state.
INT hdlcRemoteAddress1.3.6.1.4.1.11.2.14.3.9.8INTEGERread-writeThe remote HDLC address during communication with the local node. This object is valid only if a brouter is on the remote end of the HDLC link. It can only be set to one of the two values: 'hdlcDCEAddress' or 'hdlcDTEAddress'. Furthermore, the setting of this object must be different from the setting of the hdlcLocalAddress object. This object, along with hdlcLocalAddress and hdlcRemoteNodeId, constitute a superobject. See hdlcRemoteNodeId for more details.
CTR hdlcRemoteXidCommands1.3.6.1.4.1.11.2.14.3.9.9Counterread-onlyCount of XID commands issued by remote node.
CTR hdlcRemoteXidResponses1.3.6.1.4.1.11.2.14.3.9.10Counterread-onlyCount of XID responses issued by remote node.
CTR hdlcRemoteTestCommands1.3.6.1.4.1.11.2.14.3.9.11Counterread-onlyCount of Test commands issued by remote node.
CTR hdlcRemoteTestResponses1.3.6.1.4.1.11.2.14.3.9.12Counterread-onlyCount of Test responses issued by remote node.
INT hdlcRemoteNodeId1.3.6.1.4.1.11.2.14.3.9.13INTEGERread-writeIdentification of the node at the opposite end of the HDLC link (eg. brouter or bridge). This object, along with hdlcLocalAddress and hdlcRemoteAddress, constitute a superobject. This object may only be set to one of the two values: 'remoteNodeBridge' or 'remoteNodeRouter'. If this object is set to 'remoteNodeUnknown', then hdlcLocalAddress and hdlcRemoteAddress need not be supplied, and will be ignored if provided. In a get, this object may report 'remoteNodeBridge', but attempts to set this object to 'remoteNodeBridge' will result in an error pdu with error type invalidData. If this object is set to 'remoteNodeRouter', then hdlcLocalAddress and hdlcRemoteAddress must be present and contiguous in the pdu in order to properly complete the superobject. The three objects may be in any order within the pdu.
x25Table1.3.6.1.4.1.11.2.14.3.10not-accessibleA list of X25 entries.
INT x25Index1.3.6.1.4.1.11.2.14.3.10.1INTEGERread-onlyIndex into X25 remote timer table on a per port basis. bridge.HP28674: There is only one 'real' instance of this object on port 2.
TIK x25T1Timer1.3.6.1.4.1.11.2.14.3.10.2TimeTicksread-writePeriod of time used to timeout retransmits for X25.
INT x25N2Count1.3.6.1.4.1.11.2.14.3.10.3INTEGERread-writeNumber of retries to be performed during X.25 communication.
TIK x25T3Timer1.3.6.1.4.1.11.2.14.3.10.4TimeTicksread-writePeriod of idle time before a disconnect is executed for X25.
icfSecurity1.3.6.1.4.1.11.2.14.4
STR icfSecurPassword1.3.6.1.4.1.11.2.14.4.1DisplayStringread-writeThis variable contains a string which is used both as the community name for the password community, and as the login password for the console port. This community name is needed for most SET operations. In addition, the variables in the ICF security group are only visible within the password community, and must use the value of this variable as the community name for GET operations. If the value of this variable is equal to the null string, the community name 'public' or the null string will be treated the same as the password community.
INT icfSecurAuthAnyMgr1.3.6.1.4.1.11.2.14.4.2INTEGERread-writeWhen this variable is set to enabled, any manager with a valid community name may perform SET operations on this device. In this configuration, entries in the icfSecurAuthMgrTable are used only for trap destinations. If this variable is set to disabled, a manager must be in the icfSecurAuthMgrTable and have a valid community name in order to perform SET operations.
icfSecurAuthMgrTable1.3.6.1.4.1.11.2.14.4.3not-accessibleThis table contains a list of addresses of managers that are allowed to perform SET operations on this device, and controls the destination addresses for traps. If icfSecurAuthAnyMgr is set to disabled, a manager must be in this table and use the correct community name for the password community in order to perform a GET operation on this table.
icfSecurAuthMgrEntry1.3.6.1.4.1.11.2.14.4.3.1not-accessibleAn entry in the icfSecurAuthMgrTable containing information about a single manager.
INT icfAuthMgrIndex1.3.6.1.4.1.11.2.14.4.3.1.1INTEGERread-onlyThis object contains the index which uniquely identifies this entry in the icfSecurAuthMgrTable.
IP icfAuthMgrIpAddress1.3.6.1.4.1.11.2.14.4.3.1.2IpAddressread-writeThe IP address of a manager that is allowed to manage this device. Setting this variable to a nonzero value will clear the corresponding instance of the icfAuthMgrIpxAddress variable.
OCT icfAuthMgrIpxAddress1.3.6.1.4.1.11.2.14.4.3.1.3OCTET STRINGread-writeThe IPX address of a manager that is allowed to manage this device. Setting this variable to a valid IPX address will clear the corresponding instance of the icfAuthMgrIpAddress variable.
INT icfAuthMgrRcvTraps1.3.6.1.4.1.11.2.14.4.3.1.4INTEGERread-writeIf this variable is set to enabled, any traps generated by this device will be sent to the manager indicated by the corresponding instance of either icfAuthMgrIpAddress or icfAuthMgrIpxAddress, whichever is valid.
icfSecurIntruder1.3.6.1.4.1.11.2.14.4.4
INT icfSecurIntruderFlag1.3.6.1.4.1.11.2.14.4.4.1INTEGERread-writeIf this object is set to 'valid', the remainder of the intruder objects contain information about an authentication failure. The Security LED on the device will blink if this flag is set to 'valid'. The intruder objects will not be overwritten as long as this flag is set to 'valid'. Setting this flag to 'invalid' will turn off the Security LED if there are no other current violations, and will allow the intruder objects to be overwritten by subsequent authentication failures.
IP icfSecurIntruderIpAddress1.3.6.1.4.1.11.2.14.4.4.2IpAddressread-onlyThe IP address of the manager that caused the authentication failure. Only one of icfSecurIntruderIpAddress and icfSecurIntruderIPXAddress will be valid.
OCT icfSecurIntruderIpxAddress1.3.6.1.4.1.11.2.14.4.4.3OCTET STRINGread-onlyThe IPX address of the manager that caused the authentication failure. Only one of icfSecurIntruderIpAddress and icfSecurIntruderIPXAddress will be valid.
TIK icfSecurIntruderTime1.3.6.1.4.1.11.2.14.4.4.4TimeTicksread-onlyThe value of sysUpTime when the authentication failure occurred. A value of 0 indicates that the agent has been reset since this authentication failure occurred.
icfConfig1.3.6.1.4.1.11.2.14.5
icfConfigIfTable1.3.6.1.4.1.11.2.14.5.1not-accessibleThis table contains per-interface configuration information that will take effect after the next reset of the device.
icfConfigIfEntry1.3.6.1.4.1.11.2.14.5.1.1not-accessibleAn entry in the icfConfigIfTable containing information about a single interface.
INT icfConfigIfIndex1.3.6.1.4.1.11.2.14.5.1.1.1INTEGERread-onlyThe index of the interface which this information contains configuration information for. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex.
IP icfConfigIfIpAddress1.3.6.1.4.1.11.2.14.5.1.1.2IpAddressread-writeThis variable contains the IP address for this interface which will be used after the next reset of the device.
IP icfConfigIfNetMask1.3.6.1.4.1.11.2.14.5.1.1.3IpAddressread-writeThis variable contains the IP subnet mask for this interface which will be used after the next reset of the device.
IP icfConfigIfDefaultGate1.3.6.1.4.1.11.2.14.5.1.1.4IpAddressread-writeThis variable contains the IP address of the default router for this interface which will be used after the next reset of the device.
INT icfConfigIpTTL1.3.6.1.4.1.11.2.14.5.2INTEGERread-writeThis variable contains the default IP time to live which will be used after the next reset of the device.
INT icfConfigBootpEnable1.3.6.1.4.1.11.2.14.5.3INTEGERread-writeSetting this flag to 'enabled' (the default) will clear any existing IP address configuration for this device, and will cause the device to use the Bootp protocol to obtain its IP configuration after the next reset. This flag must be set to 'disabled' in order to configure an IP address for the device. Setting this flag to 'disabled' will prevent the Bootp protocol from running. Setting this flag to 'disabled' when there is no IP address configured will disable the IP protocol stack on this device.
icfDot12Draft1.3.6.1.4.1.11.2.14.8
icfVgRepeater1.3.6.1.4.1.11.2.14.8.1
icfVgBasic1.3.6.1.4.1.11.2.14.8.1.1
icfVgBasicRptr1.3.6.1.4.1.11.2.14.8.1.1.1
MAC icfVgMACAddress1.3.6.1.4.1.11.2.14.8.1.1.1.1MacAddressread-onlyThe MAC address used by the repeater when it initiates training on the uplink port. Repeaters are allowed to train with an assigned MAC address or a null (all zeroes) MAC address.
INT icfVgCurrentFramingType1.3.6.1.4.1.11.2.14.8.1.1.1.2INTEGERread-onlyThe type of framing (802.3 or 802.5) currently in use by the repeater.
INT icfVgDesiredFramingType1.3.6.1.4.1.11.2.14.8.1.1.1.3INTEGERread-writeThe type of framing which will be used by the repeater after the next time it is reset. The value of this object should be preserved across repeater resets and power failures
INT icfVgFramingCapability1.3.6.1.4.1.11.2.14.8.1.1.1.4INTEGERread-onlyThe type of framing this repeater is capable of supporting.
INT icfVgTrainingVersion1.3.6.1.4.1.11.2.14.8.1.1.1.5INTEGERread-onlyThe highest version bits (vvv bits) supported by the repeater during training.
INT icfVgRepeaterGroupCapacity1.3.6.1.4.1.11.2.14.8.1.1.1.6INTEGERread-onlyThe icfVgGroupCapacity is the number of groups that can be contained within the repeater. Within each managed repeater, the groups are uniquely numbered in the range from 1 to icfVgRepeaterGroupCapacity. Some groups may not be present in the repeater, in which case the actual number of groups present will be less than icfVgRepeaterGroupCapacity. The number of groups present is never greater than icfVgRepeaterGroupCapacity.
INT icfVgRepeaterHealthState1.3.6.1.4.1.11.2.14.8.1.1.1.7INTEGERread-onlyThe icfVgRepeaterHealthState object indicates the operational state of the repeater. The icfVgRepeaterHealthText may be consulted for more specific information about the state of the repeater's health. In the case of multiple kinds of failures (e.g., repeater failure and port failure), the value of this attribute shall reflect the highest priority failure in the following order, listed highest priority first: rptrFailure(3) groupFailure(4) portFailure(5) generalFailure(6).
STR icfVgRepeaterHealthText1.3.6.1.4.1.11.2.14.8.1.1.1.8DisplayStringread-onlyThe health text object is a text string that provides information relevant to the operational state of the repeater. Agents may use this string to provide detailed information on current failures, including how they were detected, and/or instructions for problem resolution. The contents are agent specific.
INT icfVgRepeaterReset1.3.6.1.4.1.11.2.14.8.1.1.1.9INTEGERread-writeSetting this object to reset(2) causes the repeater to transition to its initial state as specified in clause 12 [IEEE Draft Std 802.12]. Setting this object to noReset(1) has no effect. The agent will always return the value noReset(1) when this object is read. After receiving a request to set this variable to reset(2), the agent is allowed to delay the reset for a short period. For example, the implementor may choose to delay the reset long enough to allow the SNMP response to be transmitted. In any event, the SNMP response must be transmitted. This action does not reset the management counters defined in this document nor does it affect the icfVgPortAdminStatus parameters. Included in this action is the execution of a disruptive Self-Test with the following characteristics: a) The nature of the tests is not specified. b) The test resets the repeater but without affecting management information about the repeater. c) The test does not inject packets onto any segment. d) Packets received during the test may or may not be transferred. e) The test does not interfere with management functions. After performing this self-test, the agent will update the repeater health information (including icfVgRepeaterHealthState and icfVgRepeaterHealthText).
INT icfVgRepeaterNonDisruptTest1.3.6.1.4.1.11.2.14.8.1.1.1.10INTEGERread-writeSetting this object to selfTest(2) causes the repeater to perform an agent-specific, non-disruptive self-test that has the following characteristics: a) The nature of the tests is not specified. b) The test does not change the state of the repeater or management information about the repeater. c) The test does not inject packets onto any segment. d) The test does not prevent the relay of any packets. e) The test does not interfere with management functions. After performing this test, the agent will update the repeater health information (including icfVgRepeaterHealthState and icfVgRepeaterHealthText). Note that this definition allows returning an 'okay' result after doing a trivial test. Setting this object to noSelfTest(1) has no effect. The agent will always return the value noSelfTest(1) when this object is read.
icfVgBasicGroup1.3.6.1.4.1.11.2.14.8.1.1.2
icfVgBasicGroupTable1.3.6.1.4.1.11.2.14.8.1.1.2.1not-accessibleA table containing information about groups of ports.
icfVgBasicGroupEntry1.3.6.1.4.1.11.2.14.8.1.1.2.1.1not-accessibleAn entry in the icfVgBasicGroupTable, containing information about a single group of ports.
INT icfVgGroupIndex1.3.6.1.4.1.11.2.14.8.1.1.2.1.1.1INTEGERnot-accessibleThis object identifies the group within the repeater for which this entry contains information. This value is never greater than icfVgRepeaterGroupCapacity.
STR icfVgGroupDescr1.3.6.1.4.1.11.2.14.8.1.1.2.1.1.2DisplayStringread-onlyA textual description of the group. This value should include the full name and version identification of the group's hardware type and indicate how the group is differentiated from other types of groups in the repeater. 'Plug-in Module, Rev A' or 'Barney Rubble 100BaseVG 4-port socket Version 2.1' are examples of valid group descriptions. It is mandatory that this only contain printable ASCII characters.
OID icfVgGroupObjectID1.3.6.1.4.1.11.2.14.8.1.1.2.1.1.3OBJECT IDENTIFIERread-onlyThe vendor's authoritative identification of the group. This value may be allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides a straight-forward and unambiguous means for determining what kind of group is being managed. For example, this object could take the value 1.3.6.1.4.1.4242.1.2.14 if vendor 'Flintstones, Inc.' was assigned the subtree 1.3.6.1.4.1.4242, and had assigned the identifier 1.3.6.1.4.1.4242.1.2.14 to its 'Wilma Flintstone 6-Port Plug-in Module.'
INT icfVgGroupOperStatus1.3.6.1.4.1.11.2.14.8.1.1.2.1.1.4INTEGERread-onlyAn object that indicates the operational status of the group. A status of notPresent(4) indicates that the group is temporarily or permanently physically and/or logically not a part of the repeater. It is an implementation-specific matter as to whether the agent effectively removes notPresent entries from the table. A status of operational(2) indicates that the group is functioning, and a status of malfunctioning(3) indicates that the group is malfunctioning in some way.
TIM icfVgGroupLastOperStatusChange1.3.6.1.4.1.11.2.14.8.1.1.2.1.1.5TimeStampread-onlyAn object that contains the value of sysUpTime at the time that the value of the icfVgGroupOperStatus object for this group last changed. A value of zero indicates that the group's operational status has not changed since the agent last restarted.
INT icfVgGroupPortCapacity1.3.6.1.4.1.11.2.14.8.1.1.2.1.1.6INTEGERread-onlyThe icfVgGroupPortCapacity is the number of ports that can be contained within the group. Valid range is 1-1024. Within each group, the ports are uniquely numbered in the range from 1 to icfVgGroupPortCapacity. Some ports may not be present in a given group instance, in which case the actual number of ports present is less than icfVgGroupPortCapacity. The number of ports present is never greater than icfVgGroupPortCapacity.
INT icfVgGroupCablesBundled1.3.6.1.4.1.11.2.14.8.1.1.2.1.1.7INTEGERread-writeThis configuration flag is used to select either bundled or unbundled cabling. When this flag is 'someCablesBundled(1)' and the port is not promiscuous or cascaded, frames received from ports on this group and destined to go out multiple ports on this group will be buffered completely before being repeated out ports on this group. When this flag is 'noCablesBundled(2)' or the port is promiscuous or cascaded, these frames will be repeated out ports on this group as the frame is being received. Note that the value 'someCablesBundled(1)' will work in the vast majority of installations, regardless of whether or not any cables are physically in a bundle, since promiscuous and cascaded ports automatically avoid the store and forward. The main situation in which 'noCablesBundled(2)' is beneficial is when there is a large amount of multicast traffic and the cables are not in a bundle. The value of this object should be preserved across repeater resets and power failures.
icfVgBasicPort1.3.6.1.4.1.11.2.14.8.1.1.3
icfVgBasicPortTable1.3.6.1.4.1.11.2.14.8.1.1.3.1not-accessibleA table containing information about ports.
icfVgBasicPortEntry1.3.6.1.4.1.11.2.14.8.1.1.3.1.1not-accessibleAn entry in the icfVgBasicPortTable, containing information about a single port.
INT icfVgPortGroupIndex1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.1INTEGERnot-accessibleThis object identifies the group containing the port for which this entry contains information.
INT icfVgPortIndex1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.2INTEGERnot-accessibleThis object identifies the port within the group for which this entry contains information. This value can never be greater than icfVgGroupPortCapacity for the associated group.
INT icfVgPortType1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.3INTEGERread-onlyDescribes the type of port. One of the following: cascadeExternal - Port is an uplink with physical connections which are externally visible cascadeInternal - Port is an uplink with physical connections which are not externally visible, such as a connection to an internal backplane in a chassis localExternal - Port is a downlink or local port with externally visible connections localInternal - Port is a downlink or local port with connections which are not externally visible, such as a connection to an internal agent 'internal' is used to identify ports which place traffic into the repeater, but do not have any external connections. Note that both DTE and cascaded repeater downlinks are considered 'local' ports.
INT icfVgPortAdminStatus1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.4INTEGERread-writePort enable/disable function. Enabling a disabled port will cause training to be initiated. Setting this object to disabled(2) disables the port. A disabled port neither transmits nor receives. Once disabled, a port must be explicitly enabled to restore operation. A port which is disabled when power is lost or when a reset is exerted shall remain disabled when normal operation resumes.
INT icfVgPortStatus1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.5INTEGERread-onlyCurrent status for the port as specified by the PORT_META_STATE in the port process module of clause 12 [IEEE Draft Std 802.12]. During initialization or any link warning conditions, icfVgPortStatus will be 'inactive(2)'. When Training_Up is received by the repeater on a local port (or when Training_Down is received on a cascade port), icfVgPortStatus will change to 'training(3)' and icfVgTrainingResult can be monitored to see the detailed status regarding training. When 24 consecutive good FCS packets are received and the configuration bits are OK, icfVgPortStatus will change to 'active(1)'. A disabled port shall have a port status of 'inactive(2)'.
INT icfVgPortSupportedPromiscMode1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.6INTEGERread-onlyThis object describes whether the port hardware is capable of supporting promiscuous mode, single address mode (i.e., repeater filters unicasts not addressed to the end station attached to this port), or both. A port for which icfVgPortType is equal to 'cascadeInternal' or 'cascadeExternal' will always have a value of 'promiscModeOnly' for this object.
INT icfVgPortSupportedCascadeMode1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.7INTEGERread-onlyThis object describes whether the port hardware is capable of supporting cascaded repeaters, end nodes, or both. A port for which icfVgPortType is equal to 'cascadeInternal' or 'cascadeExternal' will always have a value of 'cascadePort' for this object.
INT icfVgPortAllowedTrainType1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.8INTEGERread-writeThis security object is set by the network manager to configure what type of device is permitted to connect to the port. One of the following values: allowEndNodesOnly - only non-promiscuous end nodes permitted. allowPromiscuousEndNodes - promiscuous or non- promiscuous end nodes permitted allowEndNodesOrRepeaters - repeaters or non- promiscuous end nodes permitted allowAnything - repeaters, promiscuous or non-promiscuous end nodes permitted For a port for which icfVgPortType is equal to 'cascadeInternal' or 'cascadeExternal', the corresponding instance of this object may not be set to 'allowEndNodesOnly' or 'allowPromiscuousEndNodes'. The agent must reject a SET of this object if the value includes no capabilities that are supported by this port's hardware, as defined by the values of the corresponding instances of icfVgPortSupportedPromiscMode and icfVgPortSupportedCascadeMode.
OCT icfVgPortLastTrainConfig1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.9OCTET STRINGread-onlyThis 16 bit field contains the most recent training configuration in an error-free training frame sent by the end node connected to the port. For cascade ports, this is the responder's configuration field from the most recent error-free training response frame received in response to training initiated by this repeater. This object is formatted as follows: First Octet: Second Octet: 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 +-+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+ |v|v|v|0|0|0|0|0| |0|0|0|F|F|P|P|R| +-+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+ vvv: The version of the 802.12 training protocol with which the training initiator is compliant FF: 00 = frameType88023 is requested 01 = frameType88025 is requested 10 = reserved 11 = either frameType88023 or frameType88025 is acceptable PP: 00 = request singleAddressMode 01 = request promiscuousMode 10 = reserved 11 = reserved R: 0 = request is from an end node 1 = request is from a repeater
OCT icfVgPortTrainingResult1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.10OCTET STRINGread-onlyThis 18 bit field is used to indicate the result of training. It contains two bits which indicate if error-free training frames have been received, and it also contains the 16 bits of the most recent valid training response frame on the port. First Octet: Second Octet: Third Octet: 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 +-+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+ |0|0|0|0|0|0|V|G| |v|v|v|D|C|N|0|0| |0|0|0|F|F|P|P|R| +-+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+ V: Valid: set when at least one error-free training frame has been received. Indicates the 16 training configuration bits in icfVgPortLastTrainConfig and icfVgPortTrainingResult contain valid information. This bit is cleared when icfVgPortStatus transitions to the 'inactive' or 'training' state. G: LinkGood: indicates the link hardware is OK. Set if 24 consecutive error-free training packets have been received. Cleared when a training packet with errors is received, and when icfVgPortStatus transitions to the 'inactive' or 'training' state. vvv: The version of the 802.12 training protocol with which the training responder is compliant D: 0 = no duplicate address has been detected 1 = duplicate address has been detected C: 0 = the requested configuration is compatible with the port 1 = the requested configuration is not compatible with the port. The FF, PP and R bits indicate the configuration which would be allowed (providing N = 0). N: 0 = access will be allowed, providing the configuration is compatible (C = 0). 1 = access not allowed because of security restrictions FF: 00 = frameType88023 will be used 01 = frameType88025 will be used 10 = reserved 11 = reserved PP: 00 = singleAddressMode will be used 01 = promiscuousMode will be used 10 = reserved 11 = reserved R: 0 = requested access as an end node is allowed 1 = requested access as a repeater is allowed If the port is in training, a management station can examine this object to see if any training packets have been passed successfully. If there have been any good training packets, the Valid bit will be set and the management station can examine the 16 training response bits to see if there is a duplicate address, configuration, or security problem. Note that on a repeater local port, this repeater generates the training response bits, while on the cascade port, the higher level repeater originated the training response bits.
T/F icfVgPortPriorityEnable1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.11TruthValueread-writeA configuration flag used to determine whether the repeater will service high priority requests received on the port as high priority or normal priority. When 'false', high priority requests on this port will be serviced as normal priority. The value of this object should be preserved across repeater resets and power failures. The setting of this object has no effect on a cascade port.
INT icfVgPortMediaType1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.12INTEGERread-onlyThe type of physical media in use. One of the following values: other undefined unknown true state not known pmdMissing PMD device not attached utp4 4-pair unshielded twisted pair stp2 2-pair shielded twisted pair fibre 802.12 fibre optic cabling This object may be 'unknown' if the implementation is not capable of identifying the PMD media type, or whether or not the PMD is even present.
icfVgMonitor1.3.6.1.4.1.11.2.14.8.1.2
icfVgMonRptr1.3.6.1.4.1.11.2.14.8.1.2.1
icfVgMonGroup1.3.6.1.4.1.11.2.14.8.1.2.2
icfVgMonPort1.3.6.1.4.1.11.2.14.8.1.2.3
icfVgMonPortTable1.3.6.1.4.1.11.2.14.8.1.2.3.1not-accessibleA table of performance and error statistics for the ports.
icfVgMonPortEntry1.3.6.1.4.1.11.2.14.8.1.2.3.1.1not-accessibleAn entry in the icfVgMonPortTable, containing performance and error statistics for a single port.
CTR icfVgPortReadableFrames1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.1Counterread-onlyThis object is the number of good frames of valid frame length that have been received on this port. This counter is incremented by one for each frame received on the port which is not counted by icfVgPortIPMFrames or icfVgPortDataErrorFrames.
CTR icfVgPortReadableOctets1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.2Counterread-onlyThis object is a count of the number of octets contained in good frames that have been received on this port. This counter is incremented by OctetCount for each frame received on this port which has been determined to be a readable frame (i.e. each frame counted by icfVgPortReadableFrames). Note that this counter may roll over very quickly.
CTR icfVgPortUnreadableOctets1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.3Counterread-onlyThis object is a count of the number of octets contained in invalid frames that have been received on this port. This counter is incremented by OctetCount for each frame received on this port which is counted by icfVgPortIPMFrames or icfVgPortDataErrorFrames. This counter can be combined with icfVgPortReadableOctets to calculate network utilization. Note that this counter may roll over very quickly.
CTR icfVgPortHighPriorityFrames1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.4Counterread-onlyThis object is a count of high priority frames that have been received on this port. This counter is incremented by one for each high priority frame received on this port, including readable, invalid, and training frames. This counter does not include normal priority frames which were priority promoted.
CTR icfVgPortHighPriorityOctets1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.5Counterread-onlyThis object is a count of the number of octets contained in high priority frames that have been received on this port. This counter is incremented by OctetCount for each frame received on this port which is counted by icfVgPortHighPriorityFrames. Note that this counter may roll over very quickly.
CTR icfVgPortBroadcastFrames1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.6Counterread-onlyThis object is a count of broadcast packets that have been received on this port. This counter is incremented by one for each readable frame received on this port whose destination MAC address is the broadcast address. Frames counted by this counter are also counted by icfVgPortReadableFrames.
CTR icfVgPortMulticastFrames1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.7Counterread-onlyThis object is a count of multicast packets that have been received on this port. This counter is incremented by one for each readable frame received on this port whose destination MAC address has the group address bit set, but is not the broadcast address. Frames counted by this counter are also counted by icfVgPortReadableFrames, but not by icfVgPortBroadcastFrames
CTR icfVgPortIPMFrames1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.8Counterread-onlyThis object is a count of the number of frames that have been received on this port with an invalid packet marker and no PMI errors. A repeater will write an invalid packet marker to the end of a frame containing errors as it is forwarded through the repeater to the other ports. This counter is incremented by one for each frame received on this port which has had an invalid packet marker added to the end of the frame. This counter indicates problems with remote cable segments, as opposed to problems with cables directly attached to this repeater.
CTR icfVgPortDataErrorFrames1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.9Counterread-onlyThis object is a count of errored frames received on this port. This counter is incremented by one for each frame received on this port with any of the following errors: FCS (with no IPM), PMI erorrs (excluding frames with an IPM error as the only PMI error), oversize (with no IPM), or undersize (with no IPM). Does not include packets counted by icfVgPortIPMFrames. This counter indicates problems with the cable directly attached to this repeater, while icfVgPorrtIPMFrames indicates problems with remote cables attached to other repeaters.
CTR icfVgPortPriorityPromotions1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.10Counterread-onlyThis counter is incremented by one each time the priority promotion timer has expired on this port and a normal priority frame was priority promoted.
icfVgAddrTrack1.3.6.1.4.1.11.2.14.8.1.3
icfVgAddrTrackRptr1.3.6.1.4.1.11.2.14.8.1.3.1
icfVgAddrTrackGroup1.3.6.1.4.1.11.2.14.8.1.3.2
icfVgAddrTrackPort1.3.6.1.4.1.11.2.14.8.1.3.3
icfVgAddrTrackTable1.3.6.1.4.1.11.2.14.8.1.3.3.1not-accessibleTable of address mapping information about the ports.
icfVgAddrTrackEntry1.3.6.1.4.1.11.2.14.8.1.3.3.1.1not-accessibleAn entry in the table, containing address mapping information about a single port.
OCT icfVgAddrLastTrainedAddress1.3.6.1.4.1.11.2.14.8.1.3.3.1.1.1OCTET STRINGread-onlyThis object is the MAC address of the last station which succeeded in training on this port. A cascaded repeater may train using the null address. If no stations have succeeded in training on this port since the agent began monitoring the port activity, the agent shall return a string of length zero.
CTR icfVgAddrTrainedAddrChanges1.3.6.1.4.1.11.2.14.8.1.3.3.1.1.2Counterread-onlyThis counter is incremented by one for each time that the icfVgAddrLastTrainedAddress object for this port has changed.
hpicfAdmin1.3.6.1.4.1.11.2.14.10
hpicfDomains1.3.6.1.4.1.11.2.14.10.1
hpicfLLCDomain1.3.6.1.4.1.11.2.14.10.1.1
hpicfObjects1.3.6.1.4.1.11.2.14.11
hpicfCommon1.3.6.1.4.1.11.2.14.11.1
hpicfChain1.3.6.1.4.1.11.2.14.11.1.1
INT hpicfChainMaxMembers1.3.6.1.4.1.11.2.14.11.1.1.1INTEGERread-onlyThe maximum number of devices that can be supported on the Distributed Management Chain from this agent.
INT hpicfChainCurMembers1.3.6.1.4.1.11.2.14.11.1.1.2INTEGERread-onlyThe number of devices currently on the Distributed Management Chain connected to this agent.
TIM hpicfChainLastChange1.3.6.1.4.1.11.2.14.11.1.1.3TimeStampread-onlyThe value of sysUpTime on this agent the last time a device was added to or removed from the Distributed Management Chain connected to this agent.
CTR hpicfChainChanges1.3.6.1.4.1.11.2.14.11.1.1.4Counterread-onlyA count of the number of times devices have been added to or removed from the Distributed Management Chain connected to this agent.
hpicfChainTable1.3.6.1.4.1.11.2.14.11.1.1.5not-accessibleA table of boxes currently connected to the same Distributed Management Chain as this agent.
hpicfChainEntry1.3.6.1.4.1.11.2.14.11.1.1.5.1not-accessibleAn entry in the table describing a single box on the Distributed Management Chain connected to this device.
OCT hpicfChainId1.3.6.1.4.1.11.2.14.11.1.1.5.1.1OCTET STRINGread-onlyAn identifier which uniquely identifies this particular box. In practice, this will be a box serial number or MAC address.
OID hpicfChainObjectId1.3.6.1.4.1.11.2.14.11.1.1.5.1.2OBJECT IDENTIFIERread-onlyThe authoritative identification of the box which provides an easy and unambiguous means for determining the type of box.
TIM hpicfChainTimestamp1.3.6.1.4.1.11.2.14.11.1.1.5.1.3TimeStampread-onlyThe value of the agent's sysUpTime at which this box was last initialized. If the box has not been initialized since the last reinitialization of the agent, then this object has a zero value.
T/F hpicfChainHasAgent1.3.6.1.4.1.11.2.14.11.1.1.5.1.4TruthValueread-onlyThis object will contain the value 'true' if this box contains at least one network management agent capable of responding to SNMP requests, and will contain the value 'false' otherwise.
T/F hpicfChainThisBox1.3.6.1.4.1.11.2.14.11.1.1.5.1.5TruthValueread-onlyThis object will contain the value 'true' if this entry in the chain table corresponds to the box which contains the agent which is responding to this SNMP request, and will contain the value 'false' otherwise.
INT hpicfChainLocation1.3.6.1.4.1.11.2.14.11.1.1.5.1.6INTEGERread-writeThis byte is settable by a management station and is not interpreted by the agent. The intent is that a management station can use it to assign an ordering to boxes on the chain that can later be used when displaying the chain.
hpicfChainViewTable1.3.6.1.4.1.11.2.14.11.1.1.6not-accessibleThis table contains one entry for each box on the Distributed Management Chain for which this agent is able to act as a proxy.
hpicfChainViewEntry1.3.6.1.4.1.11.2.14.11.1.1.6.1not-accessibleAn entry in the hpicfChainViewTable containing information about how to proxy to a single box.
OCT hpicfChainViewId1.3.6.1.4.1.11.2.14.11.1.1.6.1.1OCTET STRINGread-onlyAn identifier which uniquely identifies this particular box. In practice, this will be a box serial number or MAC address.
STR hpicfChainViewName1.3.6.1.4.1.11.2.14.11.1.1.6.1.2DisplayStringread-onlyThe local name of this box. This is used by the proxy agent for the box to determine which box on the Distributed Management Chain is being addressed. If an agent does not use this method to distinguish proxy destinations, it should return a zero length octet string for this object. For SNMPv1, the destination box is specified by appending this name to the proxy agent's community name. For example, if this agent has a community with a community name of 'public', and the value of this object is 'repeater1', the community 'public/repeater1' will specify that the agent should proxy to the public community of the 'repeater1' box. The default value for this object for box-level repeaters is an ASCII hex representation of the low-order three bytes of the device MAC address.
hpicfChassis1.3.6.1.4.1.11.2.14.11.1.2
OCT hpicfChassisId1.3.6.1.4.1.11.2.14.11.1.2.1OCTET STRINGread-onlyAn identifier that uniquely identifies this particular chassis. This will be the same value as the instance of hpicfChainId for this chassis.
INT hpicfChassisNumSlots1.3.6.1.4.1.11.2.14.11.1.2.2INTEGERread-onlyThe number of slots in this chassis.
hpicfSlotTable1.3.6.1.4.1.11.2.14.11.1.2.3not-accessibleA table that contains information on all the slots in this chassis.
hpicfSlotEntry1.3.6.1.4.1.11.2.14.11.1.2.3.1not-accessibleInformation about a slot in a chassis
INT hpicfSlotIndex1.3.6.1.4.1.11.2.14.11.1.2.3.1.1INTEGERread-onlyThe slot number within the box for which this entry contains information.
OID hpicfSlotObjectId1.3.6.1.4.1.11.2.14.11.1.2.3.1.2OBJECT IDENTIFIERread-onlyThe authoritative identification of the card plugged into this slot in this chassis. A value of { 0 0 } indicates an empty slot.
TIM hpicfSlotLastChange1.3.6.1.4.1.11.2.14.11.1.2.3.1.3TimeStampread-onlyThe value of the agent's sysUpTime at which a card in this slot was last inserted or removed. If no module has been inserted or removed since the last reinitialization of the agent, this object has a zero value.
STR hpicfSlotDescr1.3.6.1.4.1.11.2.14.11.1.2.3.1.4DisplayStringread-onlyA textual description of the card plugged into this slot in this chassis, including the product number and version information.
hpicfEntityTable1.3.6.1.4.1.11.2.14.11.1.2.4not-accessibleA table that contains information about the (logical) networking devices contained in this chassis.
hpicfEntityEntry1.3.6.1.4.1.11.2.14.11.1.2.4.1not-accessibleInformation about a single logical networking device contained in this chassis.
INT hpicfEntityIndex1.3.6.1.4.1.11.2.14.11.1.2.4.1.1INTEGERread-onlyAn index that uniquely identifies the logical network device for which this entry contains information.
INT hpicfEntityFunction1.3.6.1.4.1.11.2.14.11.1.2.4.1.2INTEGERread-onlyThe generic function provided by the logical network device. The value is a sum. Starting from zero, for each type of generic function that the entity performs, 2 raised to a power is added to the sum. The powers are according to the following table: Function Power other 0 repeater 1 bridge 2 router 3 agent 5 For example, an entity performing both bridging and routing functions would have a value of 12 (2^2 + 2^3).
OID hpicfEntityObjectId1.3.6.1.4.1.11.2.14.11.1.2.4.1.3OBJECT IDENTIFIERread-onlyThe authoritative identification of the logical network device which provides an unambiguous means of determining the type of device. The value of this object is analagous to MIB-II's sysObjectId.
STR hpicfEntityDescr1.3.6.1.4.1.11.2.14.11.1.2.4.1.4DisplayStringread-onlyA textual description of this device, including the product number and version information. The value of this object is analogous to MIB-II's sysDescr.
TIM hpicfEntityTimestamp1.3.6.1.4.1.11.2.14.11.1.2.4.1.5TimeStampread-onlyThe value of the agent's sysUpTime at which this logical network device was last reinitialized. If the entity has not been reinitialized since the last reinitialization of the agent, then this object has a zero value.
hpicfSlotMapTable1.3.6.1.4.1.11.2.14.11.1.2.5not-accessibleA table that contains information about which entities are in which slots in this chassis.
hpicfSlotMapEntry1.3.6.1.4.1.11.2.14.11.1.2.5.1not-accessibleA relationship between a slot and an entity in this chassis. Such a relationship exists if the particular slot is occupied by a physical module performing part of the function of the particular entity.
INT hpicfSlotMapSlot1.3.6.1.4.1.11.2.14.11.1.2.5.1.1INTEGERread-onlyA slot number within the chassis which contains (part of) this entity.
INT hpicfSlotMapEntity1.3.6.1.4.1.11.2.14.11.1.2.5.1.2INTEGERread-onlyThe entity described in this mapping.
hpicfSensorTable1.3.6.1.4.1.11.2.14.11.1.2.6not-accessibleA table that contains information on all the sensors in this chassis
hpicfSensorEntry1.3.6.1.4.1.11.2.14.11.1.2.6.1not-accessibleInformation about a sensor in a chassis
INT hpicfSensorIndex1.3.6.1.4.1.11.2.14.11.1.2.6.1.1INTEGERread-onlyAn index that uniquely identifies the sensor for which this entry contains information.
OID hpicfSensorObjectId1.3.6.1.4.1.11.2.14.11.1.2.6.1.2OBJECT IDENTIFIERread-onlyThe authoritative identification of the kind of sensor this is.
INT hpicfSensorNumber1.3.6.1.4.1.11.2.14.11.1.2.6.1.3INTEGERread-onlyA number which identifies a particular sensor from other sensors of the same kind. For instance, if there are many temperature sensors in this chassis, this number whould identify a particular temperature sensor in this chassis.
INT hpicfSensorStatus1.3.6.1.4.1.11.2.14.11.1.2.6.1.4INTEGERread-onlyActual status indicated by the sensor.
CTR hpicfSensorWarnings1.3.6.1.4.1.11.2.14.11.1.2.6.1.5Counterread-onlyThe number of times hpicfSensorStatus has entered the 'warning'(3) state.
CTR hpicfSensorFailures1.3.6.1.4.1.11.2.14.11.1.2.6.1.6Counterread-onlyThe number of times hpicfSensorStatus has entered the 'bad'(2) state.
STR hpicfSensorDescr1.3.6.1.4.1.11.2.14.11.1.2.6.1.7DisplayStringread-onlyA textual description of the sensor.
hpicfChassisAddrTable1.3.6.1.4.1.11.2.14.11.1.2.7not-accessibleA table of network addresses for entities in this chassis. The primary use of this table is to map a specific entity address to a specific chassis. Note that this table may not be a complete list of network addresses for this entity.
hpicfChassisAddrEntry1.3.6.1.4.1.11.2.14.11.1.2.7.1not-accessibleAn entry containing a single network address being used by a logical network device in this chassis.
INT hpicfChasAddrType1.3.6.1.4.1.11.2.14.11.1.2.7.1.1INTEGERnot-accessibleThe kind of network address represented in this entry.
OCT hpicfChasAddrAddress1.3.6.1.4.1.11.2.14.11.1.2.7.1.2OCTET STRINGnot-accessibleThe network address being used by the logical network device associated with this entry, formatted according to the value of the associated instance of hpicfChasAddrType. For hpicfChasAddrType of ipAddr, this value is four octets long, with each octet representing one byte of the IP address, in network byte order. For hpicfChasAddrType of ipxAddr, this value is ten octets long, with the first four octets representing the IPX network number in network byte order, followed by the six byte host number in network byte order. For hpicfChasAddrType of macAddr, this value is six octets long, representing the MAC address in canonical order.
INT hpicfChasAddrEntity1.3.6.1.4.1.11.2.14.11.1.2.7.1.3INTEGERread-onlyAn index that uniquely identifies the logical network device in this chassis that is using this network address..
hpicfDownload1.3.6.1.4.1.11.2.14.11.1.3
hpicfDownloadTable1.3.6.1.4.1.11.2.14.11.1.3.1not-accessibleA table of firmware downloads to this device. There will at any time be either 0 or 1 rows in this table, and the only valid index for this table is 1. It is only a table so that we may take advantage of the RowStatus textual convention for configuring the download parameters.
hpicfDownloadEntry1.3.6.1.4.1.11.2.14.11.1.3.1.1not-accessibleThe row in the hpicfDownloadTable containing the download parameters.
INT hpicfDownloadIndex1.3.6.1.4.1.11.2.14.11.1.3.1.1.1INTEGERread-onlyThe index which uniquely identifies this row. The only legal value for this object is 1.
ADR hpicfDownloadOwnerAddress1.3.6.1.4.1.11.2.14.11.1.3.1.1.2TAddressread-onlyThe transport address of the management station that initiated this download attempt, formatted according to the value of the associated instance of hpicfDownloadOwnerDomain.
OID hpicfDownloadOwnerDomain1.3.6.1.4.1.11.2.14.11.1.3.1.1.3OBJECT IDENTIFIERread-onlyThe kind of transport service used by the management station that initiated this download attempt.
ADR hpicfDownloadTAddress1.3.6.1.4.1.11.2.14.11.1.3.1.1.4TAddressread-writeThe transport address of the node to download firmware from, formatted according to the value of the associated instance of hpicfDownloadTDomain. An attempt to modify this value will fail if the associated hpicfDownloadStatus object would be equal to 'active' both before and after the modification attempt.
OID hpicfDownloadTDomain1.3.6.1.4.1.11.2.14.11.1.3.1.1.5OBJECT IDENTIFIERread-writeThe kind of transport service to be used for the download. Currently supports snmpUDPDomain and snmpIPXDomain. An attempt to modify this value will fail if the associated hpicfDownloadStatus object would be equal to 'active' both before and after the modification attempt.
STR hpicfDownloadFilename1.3.6.1.4.1.11.2.14.11.1.3.1.1.6DisplayStringread-writeFilename and path of file to download (maximum length of 63 characters + NULL). An attempt to modify this value will fail if the associated hpicfDownloadStatus object would be equal to 'active' both before and after the modification attempt.
INT hpicfDownloadResetType1.3.6.1.4.1.11.2.14.11.1.3.1.1.7INTEGERread-writeThe type of reset to perform after completion of the firmware download. Note that not all agents will support all possible values, and there may be other agent-specific values for this object.
INT hpicfDownloadErrorStatus1.3.6.1.4.1.11.2.14.11.1.3.1.1.8INTEGERread-onlyStatus of download. The first seven codes are equal to the codes defined by the TFTP protocol. 'notDefined' is the same as TFTP protocol error 0. The following are the other possible values for this object: corruptFile - the agent detected a problem with the download file format. noServer - the TFTP server at hpicfDownloadTAddress did not respond to the TFTP request. tftpTimeout - the download was aborted due to excessive timeouts. hardwareError - there was a hardware problem on the agent that forced an abort of the download (see hpicfDownloadErrorText for more detailed information). success - the download has completed successfully. aborted - the download was aborted by setting the hpicfDownloadStatus to 'notInService' or 'delete'. inProgress - the TFTP transfer is currently active. idle - means that the download has not yet started (i.e. the value of hpicfDownloadStatus has not yet been set to 'active'). erasingEeprom - the agent is currently erasing the EEPROM device. Currently only used on JetDirect agents. incompleteFirmware - the agent is running an incomplete version of firmware and requires a download. Currently only used on JetDirect agents. requirePowerCycle - the agent must be power cycled to run the newly downloaded firmware. Currently only used on JetDirect agents. cannotUpgrade - the agent's current firmware revision cannot be upgraded to the revision in the download file. cannotDowngrade - the agent's current firmware revision cannot be downgraded to the revision in the download file.
STR hpicfDownloadErrorText1.3.6.1.4.1.11.2.14.11.1.3.1.1.9DisplayStringread-onlyA textual description of the current error status of the firmware download.
ROW hpicfDownloadStatus1.3.6.1.4.1.11.2.14.11.1.3.1.1.10RowStatusread-writeThe status of this download entry. This object may not be set to 'active' unless the following columnar objects exist in this row: hpicfDownloadTAddress, hpicfDownloadTDomain, hpicfDownloadFilename, and hpicfDownloadResetType.
INT hpicfDownloadLogMaxSize1.3.6.1.4.1.11.2.14.11.1.3.2INTEGERread-onlyThe maximum number of the download log entries supported by this agent. Note that 0 is a legal value for this variable.
GAU hpicfDownloadLogSize1.3.6.1.4.1.11.2.14.11.1.3.3Gaugeread-onlyThe number of download log entries currently in the hpicfDownloadLogTable.
hpicfDownloadLogTable1.3.6.1.4.1.11.2.14.11.1.3.4not-accessibleA log of the hpicfDownloadSize most recent download attempts to this device. The first entry in the table is the oldest.
hpicfDownloadLogEntry1.3.6.1.4.1.11.2.14.11.1.3.4.1not-accessibleAn entry in the hpicfDownloadLogTable containing information about a single download attempt.
INT hpicfDlLogIndex1.3.6.1.4.1.11.2.14.11.1.3.4.1.1INTEGERread-onlyThe index of this entry in the download log table. Index 1 will always contain the oldest entry. If the table is full when a download attempt is made, the new entry becomes the last entry (hpicfDownloadLogMaxSize), and all earlier entries are shifted down by one entry, removing the old index 1.
ADR hpicfDlLogOwnerAddress1.3.6.1.4.1.11.2.14.11.1.3.4.1.2TAddressread-onlyThe transport address of the management station that attempted to initiate a download of this device, formatted according to the value of hpicfDlLastOwnerDomain.
OID hpicfDlLogOwnerDomain1.3.6.1.4.1.11.2.14.11.1.3.4.1.3OBJECT IDENTIFIERread-onlyThe kind of transport service used by the management station that attempted to initiate a download of this device.
ADR hpicfDlLogTAddress1.3.6.1.4.1.11.2.14.11.1.3.4.1.4TAddressread-onlyThe transport address of the node from which this device attempted to download firmware, formatted according to the value of hpicfDlLastTDomain.
OID hpicfDlLogTDomain1.3.6.1.4.1.11.2.14.11.1.3.4.1.5OBJECT IDENTIFIERread-onlyThe kind of transport service which was used for the attempt to download firmware to this device.
STR hpicfDlLogFilename1.3.6.1.4.1.11.2.14.11.1.3.4.1.6DisplayStringread-onlyThe filename from which this device attempted to download firmware.
INT hpicfDlLogResetType1.3.6.1.4.1.11.2.14.11.1.3.4.1.7INTEGERread-onlyThe type of reset requested to be performed after completion of the firmware download attempt.
INT hpicfDlLogErrorStatus1.3.6.1.4.1.11.2.14.11.1.3.4.1.8INTEGERread-onlyThe result of the attempt to download firmware to this device. The values are the same as the corresponding values of hpicfDownloadErrorStatus.
STR hpicfDlLogErrorText1.3.6.1.4.1.11.2.14.11.1.3.4.1.9DisplayStringread-onlyA textual description of the final error status of the attempt to download firmware to this device.
hpicfBasic1.3.6.1.4.1.11.2.14.11.1.4
INT hpicfReset1.3.6.1.4.1.11.2.14.11.1.4.1INTEGERread-writeWhen this object is set to to 'normalReset' it results in a 'warm' reset, which does not clear the parameters in NOVRAM to factory defaults. When set to 'factoryReset', it results in NOVRAM being set to factory defaults. When this object is set, the agent replies, dallies a short time to allow the reply to be emitted from the device, then performs the reset. When read, this object always returns 'noReset'.
INT hpicfSelfTest1.3.6.1.4.1.11.2.14.11.1.4.2INTEGERread-writeSelf test is invoked by setting this flag to 'stExecute'. When the object changes to 'stSuccess', the test has completed successfully. Icf devices will 'hard-fail' if the test does not succeed.
hpicfRepeater1.3.6.1.4.1.11.2.14.11.2
hpRptrBasic1.3.6.1.4.1.11.2.14.11.2.1
hpRptrBasicGlobal1.3.6.1.4.1.11.2.14.11.2.1.1
STR hpRptrEntityName1.3.6.1.4.1.11.2.14.11.2.1.1.1DisplayStringread-onlyThe local name of this repeater. This is the same value as hpicfEntityName in the case where there is Distributed Management Protocol to access this device. For SNMPv1, this name is appended to the agent community name to obtain a community name to use to specify that the agent should proxy to this repeater. For example, if this agent has a community with a community name of 'public', and the value of this object is 'repeater1', the community 'public/repeater1' will specify that the agent should proxy to the public community of the repeater1 box to obtain management information about this repeater. If an agent receives a management request where the localEntity is not specified, it will default to the local repeater on which this agent is executing.
T/F hpRptrThinlanFault1.3.6.1.4.1.11.2.14.11.2.1.1.2TruthValueread-writeWhen set to 'true' this object causes the Fault Led to blink if the ThinLan Port is segmented.
T/F hpRptrSqeEnabled1.3.6.1.4.1.11.2.14.11.2.1.1.3TruthValueread-onlyWhen 'true', this flag indicates that SQE has been detected for the last ten agent transmits and there is a high probability that the SQE switch on the transceiver attached to the AUI port is set to Enabled, when it should be Disabled.
T/F hpRptrRobustHealing1.3.6.1.4.1.11.2.14.11.2.1.1.4TruthValueread-writeWhen this flag is set to 'true', it enables robust port healing mode. The 802.3 specification states that a segmented port is healed by successfully transmitting or receiving a packet on the port. This mode disables port healing on successful packet reception and requires that a packet be successfully transmitted on a port in order for a segmented port to be healed. Note that it is illegal to set this variable to 'true' on a repeater that does not have a local network management agent.
hpRptrBasicGroup1.3.6.1.4.1.11.2.14.11.2.1.2
hpRptrBasicGroupTable1.3.6.1.4.1.11.2.14.11.2.1.2.1not-accessibleHP specific extensions to the rptrGroupTable.
hpRptrBasicGroupEntry1.3.6.1.4.1.11.2.14.11.2.1.2.1.1not-accessibleAn entry in the table, containing HP extensions for a specific group.
INT hpRptrGrpGroupIndex1.3.6.1.4.1.11.2.14.11.2.1.2.1.1.1INTEGERread-onlyThe group within the repeater for which this entry contains information. This object has the same value as the corresponding instance of rptrGroupIndex.
OCT hpRptrGrpPortsAdminStatus1.3.6.1.4.1.11.2.14.11.2.1.2.1.1.2OCTET STRINGread-onlyThe hpRptrGrpPortsAdminStatus is a bit map of the state of the rptrPortAdminStatus object for all of the ports in this group. The object has a one bit for each port for which the value of rptrPortAdminStatus is equal to 'enabled(1)' and a zero bit for each port for which the value of rptrPortAdminStatus is equal to 'disabled(2)'. The bits are placed into the OCTET STRING in the following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are undefined.
OCT hpRptrGrpPortsSegStatus1.3.6.1.4.1.11.2.14.11.2.1.2.1.1.3OCTET STRINGread-onlyThe hpRptrGrpPortsSegStatus is a bit map of the state of the rptrPortAutoPartitionState of all of the ports in this group. The object has a one bit for each port for which the value of rptrPortAutoPartitionState is equal to 'notAutoPartitioned(1)' and a zero bit for each port for which the value of rptrPortAutoPartitionState is equal to 'autoPartitioned(2)'. The bits are placed into the OCTET STRING in the following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are undefined.
OCT hpRptrGrpPortsMediaAvailable1.3.6.1.4.1.11.2.14.11.2.1.2.1.1.4OCTET STRINGread-onlyThe hpRptrGrpPortsMediaAvailable is a bit map of the state of the rpMauMediaAvailable object for all of the ports in this group. The object has a one bit for each port for which the value of rpMauMediaAvailable is equal to 'available(3)' and a zero bit for each port for which the value of rpMauMediaAvailable is not equal to 'available(3)'. The bits are placed into the OCTET STRING in the following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are undefined.
OCT hpRptrGrpPortsLinkbeatEnabled1.3.6.1.4.1.11.2.14.11.2.1.2.1.1.5OCTET STRINGread-onlyThe hpRptrGrpPortsLinkbeatEnabled is a bit map of the state of the hpRptrPtLinkbeatEnable object for all of the ports in this group. The object has a one bit for each port for which the value of hpRptrPtLinkbeatEnable is equal to 'true(1)' and a zero bit for each port for which the value of hpRptrPtLinkbeatEnable is equal to 'false(2)'. The bits are placed into the OCTET STRING in the following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are undefined.
OCT hpRptrGrpPortsOperStatus1.3.6.1.4.1.11.2.14.11.2.1.2.1.1.6OCTET STRINGread-onlyThe hpRptrGrpPortsOperStatus is a bit map of the state of all hub ports in the group. The object has a 1 bit for each port that is enabled, not segmented, and the media is available. Ports on which these conditions are not true have a 0 bit. The bits are placed into the OCTET STRING in the following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are undefined.
hpRptrBasicPort1.3.6.1.4.1.11.2.14.11.2.1.3
hpRptrBasicPtTable1.3.6.1.4.1.11.2.14.11.2.1.3.1not-accessibleHP specific extensions to the rptrPortTable.
hpRptrBasicPtEntry1.3.6.1.4.1.11.2.14.11.2.1.3.1.1not-accessibleAn entry in the table, containing HP extensions for a specific port.
INT hpRptrPtGroupIndex1.3.6.1.4.1.11.2.14.11.2.1.3.1.1.1INTEGERread-onlyThe group containing the port for which this entry contains information. This object has the same value as the corresponding instance of rptrPortGroupIndex.
INT hpRptrPtPortIndex1.3.6.1.4.1.11.2.14.11.2.1.3.1.1.2INTEGERread-onlyThe port within the group for which this entry contains information. This object has the same value as the corresponding instance of rptrPortIndex.
T/F hpRptrPtLinkbeatEnable1.3.6.1.4.1.11.2.14.11.2.1.3.1.1.3TruthValueread-writeWhen this flag is set to 'true' the port's link beat is enabled and when set to 'false' it is disabled.
T/F hpRptrPtPolarityReversed1.3.6.1.4.1.11.2.14.11.2.1.3.1.1.4TruthValueread-onlyThis object is used to indicate that the hub port was wired with the positive/negative polarity of its transmit and receive pairs reversed. Note that the port will continue to operate in this state, with the hub inverting the polarity internally.
hpRptrMonitor1.3.6.1.4.1.11.2.14.11.2.2
hpRptrMonitorGlobal1.3.6.1.4.1.11.2.14.11.2.2.1
hpRptrMonCounters1.3.6.1.4.1.11.2.14.11.2.2.1.1
CTR hpRptrMonGlobalFrames1.3.6.1.4.1.11.2.14.11.2.2.1.1.1Counterread-onlyThe total number of frames of valid frame length that have been received on all ports in this repeater. This counter is the summation of the values of the rptrMonitorPortReadableFrames counter for all of the ports in this repeater. Equivalently, this counter is the summation of the values of the rptrMonitorGroupTotalFrames counter for all of the port groups in this repeater.
CTR hpRptrMonGlobalOctets1.3.6.1.4.1.11.2.14.11.2.2.1.1.2Counterread-onlyThe total number of octets contained in the valid frames that have been received on the ports in this repeater. This counter is the summation of the values of the rptrMonitorPortReadableOctets counter for all of the ports in this repeater. Equivalently, this counter is the summation of the values of the rptrMonitorGroupTotalOctets counter for all of the port groups in this repeater.
CTR hpRptrMonGlobalFCSErrors1.3.6.1.4.1.11.2.14.11.2.2.1.1.3Counterread-onlyThis counter is incremented by one for each frame received on any port with the FCSError signal asserted and the FramingError and CollisionEvent signals deasserted and whose OctetCount is greater than or equal to minFrameSize and less than or equal to maxFrameSize (Ref: 4.4.2.1, IEEE 802.3 Std). This counter is the summation of the values of the rptrMonitorPortFCSErrors counter for all of the ports in this repeater.
CTR hpRptrMonGlobalAlignmentErrors1.3.6.1.4.1.11.2.14.11.2.2.1.1.4Counterread-onlyThis counter is incremented by one for each frame received on any port with the FCSError and FramingError signals asserted and CollisonEvent signal deasserted and whose OctetCount is greater than or equal to minFrameSize and less than or equal to maxFrameSize (Ref: 4.4.2.1, IEEE 802.3 Std). If hpRptrMonGlobalAlignmentErrors is incremented, then the hpRptrMonGlobalFCSErorrs counter shall not be incremented for the same frame. This counter is the summation of the values of the rptrMonitorPortAlignmentErrors counter for all of the ports in this repeater.
CTR hpRptrMonGlobalFrameTooLongs1.3.6.1.4.1.11.2.14.11.2.2.1.1.5Counterread-onlyThis counter is incremented by one for each frame received on any port whose OctetCount is greater than maxFrameSize (Ref: 4.4.2.1, IEEE 802.3 Std). If hpRptrMonGlobalFrameTooLongs is incremented, then neither the hpRptrMonGlobalAlignmentErorrs nor the hpRptrMonGlobalFCSErrors counter shall be incremented for the frame. This counter is the summation of the values of the rptrMonitorPortFrameTooLongs counter for all of the ports in this repeater.
CTR hpRptrMonGlobalShortEvents1.3.6.1.4.1.11.2.14.11.2.2.1.1.6Counterread-onlyThis counter is incremented by one for each CarrierEvent on any port with ActivityDuration less than ShortEventMaxTime. ShortEventMaxTime is greater than 74 bit times and less than 82 bit times. ShortEventMaxTime has tolerances included to provide for circuit losses between a conformance test point at the AUI and the measurement point within the state machine. This counter is the summation of the values of the rptrMonitorPortShortEvents counter for all of the ports in this repeater.
CTR hpRptrMonGlobalRunts1.3.6.1.4.1.11.2.14.11.2.2.1.1.7Counterread-onlyThis counter is incremented by one for each CarrierEvent on any port that meets one of the following two conditions. Only one test need be made. a) The ActivityDuration is greater than ShortEventMaxTime and less than ValidPacketMinTime and the CollisionEvent signal is deasserted. b) The OctetCount is less than 64, the ActivityDuration is greater than ShortEventMaxTime and the CollisionEvent signal is deasserted. ValidPacketMinTime is greater than or equal to 552 bit times but less than 565 bit times. An event whose length is greater than 74 bit times but less than 82 bit times shall increment either the hpRptrMonGlobalShortEvents counter or the hpRptrMonGlobalRunts counter but not both. A CarrierEvent greater than or equal to 552 bit times but less than 565 bit times may or may not increment the hpRptrMonGlobalRunts counter. ValidPacketMinTime has tolerances included to provide for circuit losses between a conformance test point at the AUI and the measurement point within the state machine. Runts usually indicate collision fragments, a normal network event. This counter is the summation of the values of the rptrMonitorPortRunts counter for all of the ports in this repeater.
CTR hpRptrMonGlobalCollisions1.3.6.1.4.1.11.2.14.11.2.2.1.1.8Counterread-onlyThis counter is incremented by one for any CarrierEvent signal on any port for which the CollisionEvent signal on any port is asserted. This counter differs from rptrMonitorTransmitCollisions in that it counts all collisions seen by this repeater, even those involving only a single port on this repeater, whereas rptrMonitorTransmitCollisions counts only collisions involving multiple ports on this repeater.
CTR hpRptrMonGlobalLateEvents1.3.6.1.4.1.11.2.14.11.2.2.1.1.9Counterread-onlyThis counter is incremented by one for each CarrierEvent on any port in which the CollIn(X) variable transitions to the value SQE (Ref: 9.6.6.2, IEEE 802.3 Std) while the ActivityDuration is greater than the LateEventThreshold. Such a CarrierEvent is counted twice, as both hpRptrMonGlobalCollisions and hpRptrMonGlobalLateEvents. The LateEventThreshold is greater than 480 bit times and less than 565 bit times. LateEventThreshold has tolerances included to permit an implementation to build a single threshold to serve as both the LateEventThreshold and ValidPacketMinTime threshold. This counter is the summation of the values of the rptrMonitorPortLateEvents counter for all of the ports in this repeater.
CTR hpRptrMonGlobalVeryLongEvents1.3.6.1.4.1.11.2.14.11.2.2.1.1.10Counterread-onlyThis counter is incremented by one for each CarrierEvent on any port whose ActivityDuration is greater than the MAU Jabber Lockup Protection timer TW3 (Ref: 9.6.1 & 9.6.5, IEEE 802.3 Std). Other counters may be incremented as appropriate. This counter is the summation of the values of the rptrMonitorPortVeryLongEvents counter for all of the ports in this repeater.
CTR hpRptrMonGlobalDataRateMismatches1.3.6.1.4.1.11.2.14.11.2.2.1.1.11Counterread-onlyThis counter is incremented by one for each frame received on any port that meets all of the following conditions: a) The CollisionEvent signal is not asserted. b) The ActivityDuration is greater than ValidPacketMinTime. c) The frequency (data rate) is detectably mismatched from the local transmit frequency. The exact degree of mismatch is vendor specific and is to be defined by the vendor for conformance testing. When this event occurs, other counters whose increment conditions were satisfied may or may not also be incremented. This counter is the summation of the values of the rptrMonitorPortDatRateMismatches counter for all of the ports in this repeater.
CTR hpRptrMonGlobalAutoPartitions1.3.6.1.4.1.11.2.14.11.2.2.1.1.12Counterread-onlyThis counter is incremented by one for each time the repeater has automatically partitioned any port. The conditions that cause port partitioning are specified in the partition state machine in Section 9 of the IEEE 802.3 Std. This counter is the summation of the values of the rptrMonitorPortAutoPartitions for all of the ports in this repeater.
CTR hpRptrMonGlobalErrors1.3.6.1.4.1.11.2.14.11.2.2.1.1.13Counterread-onlyThe total number of errors which have occured on any port in this repeater. This counter is the summation of the values of other error counters, namely: hpRptrMonGlobalFCSErrors, hpRptrMonGlobalAlignmentErrors, hpRptrMonGlobalFrameTooLongs, hpRptrMonGlobalShortEvents, hpRptrMonGlobalLateEvents, hpRptrMonGlobalVeryLongEvents, and hpRptrMonGlobalDataRateMismatches. Equivalently, this counter is the summation of the values of the rptrMonitorPortTotalErrors counter for all of the ports in this repeater, or it is the summation of the values of rptrMonitorGroupTotalErrors for all of the port groups in this repeater.
CTR hpRptrMonGlobalUcastPackets1.3.6.1.4.1.11.2.14.11.2.2.1.1.14Counterread-onlyThis counter is incremented by one for each unicast packet of valid frame length received on any port. This counter is the summation of hpRptrMonPortUcastPackets for all of the ports in this repeater. This counter may not be implemented for repeaters which do not have a local network management agent.
CTR hpRptrMonGlobalBcastPackets1.3.6.1.4.1.11.2.14.11.2.2.1.1.15Counterread-onlyThis counter is incremented by one for each broadcast packet of valid frame length received on any port. This counter is the summation of hpRptrMonPortBcastPackets for all of the ports in this repeater. This counter may not be implemented for repeaters which do not have a local network management agent.
CTR hpRptrMonGlobalMcastPackets1.3.6.1.4.1.11.2.14.11.2.2.1.1.16Counterread-onlyThis counter is incremented by one for each multicast packet of valid frame length received on any port. This counter is the summation of hpRptrMonPortMcastPackets for all of the ports in this repeater. This counter may not be implemented for repeaters which do not have a local network management agent.
hpRptrMonitorGroup1.3.6.1.4.1.11.2.14.11.2.2.2
hpRptrMonitorPort1.3.6.1.4.1.11.2.14.11.2.2.3
hpRptrMonPtTable1.3.6.1.4.1.11.2.14.11.2.2.3.1not-accessibleTable of HP specific per port monitor objects.
hpRptrMonPtEntry1.3.6.1.4.1.11.2.14.11.2.2.3.1.1not-accessibleAn entry in the table, containing per port objects for a single port.
INT hpRptrMonPtGroupIndex1.3.6.1.4.1.11.2.14.11.2.2.3.1.1.1INTEGERread-onlyThe group containing the port for which this entry contains information. This object has the same value as the corresponding instance of rptrMonitorPortGroupIndex.
INT hpRptrMonPtPortIndex1.3.6.1.4.1.11.2.14.11.2.2.3.1.1.2INTEGERread-onlyThe port within the group for which this entry contains information. This object has the same value as the corresponding instance of rptrMonitorPortIndex.
CTR hpRptrMonPtUcastPackets1.3.6.1.4.1.11.2.14.11.2.2.3.1.1.3Counterread-onlyThis counter is incremented by one for each unicast packet of valid frame length received on this port. This object may not be implemented for repeaters which do not have a local network management agent.
CTR hpRptrMonPtBcastPackets1.3.6.1.4.1.11.2.14.11.2.2.3.1.1.4Counterread-onlyThis counter is incremented by one for each broadcast packet of valid frame length received on this port. This object may not be implemented for repeaters which do not have a local network management agent.
CTR hpRptrMonPtMcastPackets1.3.6.1.4.1.11.2.14.11.2.2.3.1.1.5Counterread-onlyThis counter is incremented by one for each multicast packet of valid frame length received on this port. This object may not be implemented for repeaters which do not have a local network management agent.
hpRptrAddrTrack1.3.6.1.4.1.11.2.14.11.2.3
hpRptrAddrTrkGlobal1.3.6.1.4.1.11.2.14.11.2.3.1
hpRptrAddrTrkGroup1.3.6.1.4.1.11.2.14.11.2.3.2
hpRptrAddrTrkPort1.3.6.1.4.1.11.2.14.11.2.3.3
hpicfVg1.3.6.1.4.1.11.2.14.11.3
hpVgBasic1.3.6.1.4.1.11.2.14.11.3.1
hpVgBasicGlobal1.3.6.1.4.1.11.2.14.11.3.1.1
STR hpVgEntityName1.3.6.1.4.1.11.2.14.11.3.1.1.1DisplayStringread-onlyThe local name of this 100BaseVG repeater. This is the same value as hpicfEntityName in the case where there is Distributed Management Protocol to access this device. For SNMPv1, this name is appended to the agent community name to obtain a community name to use to specify that the agent should proxy to this repeater. For example, if this agent has a community with a community name of 'public', and the value of this object is 'repeater1', the community 'public/repeater1' will specify that the agent should proxy to the public community of the repeater1 box to obtain management information about this repeater. If an agent receives a management request where the localEntity is not specified, it will default to the local repeater on which this agent is executing.
hpVgBasicGroup1.3.6.1.4.1.11.2.14.11.3.1.2
hpVgBasicGroupTable1.3.6.1.4.1.11.2.14.11.3.1.2.1not-accessibleHP specific extensions to the vgBasicGroupTable.
hpVgBasicGroupEntry1.3.6.1.4.1.11.2.14.11.3.1.2.1.1not-accessibleAn entry in the table, containing HP extensions for a specific group.
INT hpVgGrpGroupIndex1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.1INTEGERnot-accessibleThe group within the repeater for which this entry contains information. This object has the same value as the corresponding instance of icfVgGroupIndex.
OCT hpVgGrpPortsAdminStatus1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.2OCTET STRINGread-onlyThe hpVgGrpPortsAdminStatus is a bit map of the state of the icfVgPortAdminStatus object for all of the ports in this group. The object has a one bit for each port for which the value of icfVgPortAdminStatus is equal to 'enabled(1)' and a zero bit for each port for which the value of icfVgPortAdminStatus is equal to 'disabled(2)'. The bits are placed into the OCTET STRING in the following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are undefined.
OCT hpVgGrpPortsTrained1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.3OCTET STRINGread-onlyThe hpVgGrpPortsTrained is a bit map which indicates which ports in this group are currently online. The object has a one bit for each port for which meets the following conditions: 1. The value of the corresponding instance of the ifVgPortAdminStatus object is equal to 'enabled(1)'. 2. The value of the corresponding instance of the icfVgPortStatus object is equal to 'active(1)'. The object has a zero bit for each port which does not meet the above conditions. The bits are placed into the OCTET STRING in the following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are undefined.
OCT hpVgGrpPortsInTraining1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.4OCTET STRINGread-onlyThe hpVgGrpPortsInTraining is a bit map which indicates which ports in this group are currently in the training state. The object has a one bit for each port which meets the following conditions: 1. The value of the corresponding instance of the ifVgPortAdminStatus object is equal to 'enabled(1)'. 2. The value of the corresponding instance of the icfVgPortStatus object is equal to 'training(3)'. The object has a zero bit for each port which does not meet the above conditions. The bits are placed into the OCTET STRING in the following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are undefined.
OCT hpVgGrpPortsCascaded1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.5OCTET STRINGread-onlyThe hpVgGrpPortsCascaded is a bit map which indicates which ports in this group have trained as cascaded repeater ports. The object has a one bit for each port which meets the following conditions: 1. The value of the corresponding instance of the ifVgPortAdminStatus object is equal to 'enabled(1)'. 2. The value of the corresponding instance of the icfVgPortStatus object is equal to 'active(1)'. 3. The value of the corresponding instance of the icfVgPortType object is equal to either 'normalInternal(3)' or 'normalExternal(4)'. 4. The value of the 'R' bit in the corresponding instance of the icfVgPortTrainingResult object is equal to one. The object has a zero bit for each port which does not meet the above conditions. The bits are placed into the OCTET STRING in the following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are undefined.
OCT hpVgGrpPortsPromiscuous1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.6OCTET STRINGread-onlyThe hpVgGrpPortsPromiscuous is a bit map which indicates which ports in this group have trained for promiscuous operation. The object has a one bit for each port which meets the following conditions: 1. The value of the corresponding instance of the ifVgPortAdminStatus object is equal to 'enabled(1)'. 2. The value of the corresponding instance of the icfVgPortStatus object is equal to 'active(1)'. 3. The value of the corresponding instance of the icfVgPortType object is equal to either 'normalInternal(3)' or 'normalExternal(4)'. 4. The value of the 'R' bit in the corresponding instance of the icfVgPortTrainingResult object is equal to zero. 5. The value of the 'PP' field in the corresponding instance of the icfVgPortTrainingResult object is equal to 01. The object has a zero bit for each port which does not meet the above conditions. The bits are placed into the OCTET STRING in the following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are undefined.
hpVgBasicPort1.3.6.1.4.1.11.2.14.11.3.1.3
hpVgBasicPortTable1.3.6.1.4.1.11.2.14.11.3.1.3.1not-accessibleHP specific extensions to the vg port table.
hpVgBasicPortEntry1.3.6.1.4.1.11.2.14.11.3.1.3.1.1not-accessibleHP extended information about a specific vg port.
INT hpVgPortGroupIndex1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.1INTEGERnot-accessibleThe group that contains the port for which this entry contains information.
INT hpVgPortIndex1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.2INTEGERnot-accessibleThe port within the group for which this entry contains information.
T/F hpVgPortPolarityReversed1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.3TruthValueread-onlyThis object is used to indicate that the hub port was wired with the positive/negative polarity of its wire pairs reversed. Note that the port will continue to operate in this state, with the hub inverting the polarity internally.
T/F hpVgPortWireSkewError1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.4TruthValueread-onlyThis object is used to indicate that a wire skew error has been detected on this port.
hpVgMonitor1.3.6.1.4.1.11.2.14.11.3.2
hpVgMonitorGlobal1.3.6.1.4.1.11.2.14.11.3.2.1
hpVgMonCounters1.3.6.1.4.1.11.2.14.11.3.2.1.1
CTR hpVgMonGlbReadableFrames1.3.6.1.4.1.11.2.14.11.3.2.1.1.1Counterread-onlyThis object is the total number of good frames of valid frame length that have been received on all ports in this repeater. This counter is the summation of the values of the icfVgPortReadableFrames counter for all of the ports in this repeater.
CTR hpVgMonGlbReadableOctets1.3.6.1.4.1.11.2.14.11.3.2.1.1.2Counterread-onlyThis object is a count of the total number of octets contained in good frames that have been received on all ports in this repeater. This counter is the summation of the values of the icfVgPortReadableOctets counter for all of the ports in this repeater. Note that this counter may roll over very quickly.
CTR hpVgMonGlbUnreadableOctets1.3.6.1.4.1.11.2.14.11.3.2.1.1.3Counterread-onlyThis object is a count of the total number of octets contained in invalid frames that have been received on all ports in this repeater. This counter is the summation of the values of icfVgPortUnreadableOctets counter for all of the ports in this repeater. Note that this counter may roll over very quickly.
CTR hpVgMonGlbHighPriorityFrames1.3.6.1.4.1.11.2.14.11.3.2.1.1.4Counterread-onlyThis object is a count of the total number of high priority frames that have been received on all ports in this repeater. This counter is a summation of the values of the icfVgPortHighPriorityFrames counter for all of the ports in this repeater.
CTR hpVgMonGlbHighPriorityOctets1.3.6.1.4.1.11.2.14.11.3.2.1.1.5Counterread-onlyThis object is a count of the total number of octets contained in high priority frames that have been received on all ports of this repeater. This counter is a summation of the values of the icfVgPortHighPriorityOctets counter for all of the ports in this repeater. Note that this counter may roll over very quickly.
CTR hpVgMonGlbBroadcastFrames1.3.6.1.4.1.11.2.14.11.3.2.1.1.6Counterread-onlyThis object is a count of the total number of broadcast packets that have been received on all ports in this repeater. This counter is a summation of the values of the icfVgPortBroadcastFrames counter for all of the ports in this repeater.
CTR hpVgMonGlbMulticastFrames1.3.6.1.4.1.11.2.14.11.3.2.1.1.7Counterread-onlyThis object is a count of the total number of multicast packets that have been received on all ports in this repeater. This counter is a summation of the values of the icfVgPortMulticastFrames counter for all of the ports in this repeater.
CTR hpVgMonGlbIPMFrames1.3.6.1.4.1.11.2.14.11.3.2.1.1.8Counterread-onlyThis object is a count of the total number of frames that have been received on all ports in this repeater with an invalid packet marker. This counter is a summation of the values of the icfVgPortIPMFrames counter for all of the ports in this repeater.
CTR hpVgMonGlbDataErrorFrames1.3.6.1.4.1.11.2.14.11.3.2.1.1.9Counterread-onlyThis object is a count of the total number of errored frames received on all ports in this repeater. This counter is a summation of the values of the icfVgPortDataErrorFrames counter for all of the ports in this repeater.
CTR hpVgMonGlbPriorityPromotions1.3.6.1.4.1.11.2.14.11.3.2.1.1.10Counterread-onlyThis object is a count of the total number of times the priority promotion timer has expired on any port in this repeater. This counter is a summation of the values of the icfVgPortPriorityPromotions counter for all of the ports in this repeater.
hpVgMonitorGroup1.3.6.1.4.1.11.2.14.11.3.2.2
hpVgMonitorPort1.3.6.1.4.1.11.2.14.11.3.2.3
hpicfGenericRepeater1.3.6.1.4.1.11.2.14.11.4
hpGRpBasic1.3.6.1.4.1.11.2.14.11.4.1
hpGRpBasicGlobal1.3.6.1.4.1.11.2.14.11.4.1.1
INT hpGRpSelfHealEnable1.3.6.1.4.1.11.2.14.11.4.1.1.1INTEGERread-writeThis flag controls whether or not the device will send self healing packets. Self healing packets are normally sent once per second by the agent when no other traffic is present. When there is no traffic present on a network, there is no way to detect cabling problems (or the repair of cabling problems) and status LEDs are not always correct. Enabling this flag allows the agent to detect cabling problems on an idle network. This flag can be disabled if self healing packets are not wanted. On the 100BaseVG-AnyLAN SNMP/Bridge card, these packets are addressed to a unique unused unicast station address which has been reserved by HP for this purpose. On 802.3 repeaters, these packets are self addressed. On an 802.3 repeater, this flag MUST be enabled when using the Robust Port Healing feature. Without Robust Port Healing either a good transmit or a good receive will reconnect an autopartitioned port. With Robust Port Healing the criteria is more restrictive and only a good transmit will heal a segmented port. If all ports are segmented, the repeater will not repeat anything until the agent transmits a self healing packet and reconnects the autopartitioned ports.
hpGRpBasicGroup1.3.6.1.4.1.11.2.14.11.4.1.2
hpGRpBasicPort1.3.6.1.4.1.11.2.14.11.4.1.3
hpGRpMonitor1.3.6.1.4.1.11.2.14.11.4.2
hpGRpAddrTrack1.3.6.1.4.1.11.2.14.11.4.3
hpicfNotifications1.3.6.1.4.1.11.2.14.12
hpicfCommonTraps1.3.6.1.4.1.11.2.14.12.1
NTF hpicfChainAddition1.3.6.1.4.1.11.2.14.12.1.0.1An hpicfChainAddition trap indicates that a new node has been added to the Distributed Management Chain connected to this agent. The hpicfChainId returned is the identifier for the new node.
NTF hpicfChainRemoval1.3.6.1.4.1.11.2.14.12.1.0.2An hpicfChainRemoval trap indicates that a node has been removed from the Distributed Management Chain connected to this agent. The hpicfChainId returned is the identifier for the node that was removed.
hpicf8023RptrTraps1.3.6.1.4.1.11.2.14.12.2
hpicfVgRptrTraps1.3.6.1.4.1.11.2.14.12.3
hpicfGenRptrTraps1.3.6.1.4.1.11.2.14.12.4

RFC description

HP Integrated Communication Facility product line network element management and monitoring.

Start monitoring HP/HPE ProCurve and Aruba switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HP-ICF