HP-ICF :: linkTestRepetitions

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsHP-ICFlinkTestRepetitions

linkTestRepetitions

Module: HP-ICF

OID (symbolic): HP-ICF::linkTestRepetitions

OID (numeric): 1.3.6.1.4.1.11.2.14.1.8.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The number of link tests that the device is to complete. When this object is set to a non-zero value, the linkTestSuccess object is zeroed and the device begins a link test using IEEE 802.2 Test frames, ICMP Echo packets, or IPX diagnostic packets depending on the address selected. Link test results are contained in the link test success object. This object's value decrements (to zero) as the test proceeds. The test may be canceled at any point by setting this object to 0.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.1.8.2
snmpwalk -v2c -c public <target> HP-ICF::linkTestRepetitions

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.1.8.2.1
snmpget -v2c -c public <target> HP-ICF::linkTestRepetitions.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.1.8.2.1 i <value>

Start monitoring HP/HPE ProCurve and Aruba switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF::linkTestRepetitions OID value, configure state conditions and alerts, and monitor any HP/HPE ProCurve and Aruba switches from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14.1icfCommonHP-ICF
1.3.6.1.4.1.11.2.14.1.8linkTestHP-ICF
1.3.6.1.4.1.11.2.14.1.8.2linkTestRepetitionsHP-ICF