All MIBs › HP-ICF › icfConfigBootpEnable
icfConfigBootpEnable
Module: HP-ICF
OID (symbolic): HP-ICF::icfConfigBootpEnable
OID (numeric): 1.3.6.1.4.1.11.2.14.5.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Setting this flag to 'enabled' (the default) will clear any existing IP address configuration for this device, and will cause the device to use the Bootp protocol to obtain its IP configuration after the next reset. This flag must be set to 'disabled' in order to configure an IP address for the device. Setting this flag to 'disabled' will prevent the Bootp protocol from running. Setting this flag to 'disabled' when there is no IP address configured will disable the IP protocol stack on this device.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.5.3 snmpwalk -v2c -c public <target> HP-ICF::icfConfigBootpEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.5.3.1 snmpget -v2c -c public <target> HP-ICF::icfConfigBootpEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.5.3.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.11 | hp | DATAPROTECTOR-MIB |
| 1.3.6.1.4.1.11.2 | nm | DATAPROTECTOR-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | HP-ICF |
| 1.3.6.1.4.1.11.2.14.5 | icfConfig | HP-ICF |
| 1.3.6.1.4.1.11.2.14.5.3 | icfConfigBootpEnable | HP-ICF |