Description: Status of download. The first seven codes are equal to the codes defined by the TFTP protocol. 'notDefined' is the same as TFTP protocol error 0. The following are the other possible values for this object:

corruptFile - the agent detected a problem with the download file format. noServer - the TFTP server at hpicfDownloadTAddress did not respond to the TFTP request. tftpTimeout - the download was aborted due to excessive timeouts. hardwareError - there was a hardware problem on the agent that forced an abort of the download (see hpicfDownloadErrorText for more detailed information). success - the download has completed successfully. aborted - the download was aborted by setting the hpicfDownloadStatus to 'notInService' or 'delete'. inProgress - the TFTP transfer is currently active. idle - means that the download has not yet started (i.e. the value of hpicfDownloadStatus has not yet been set to 'active'). erasingEeprom - the agent is currently erasing the EEPROM device. Currently only used on JetDirect agents. incompleteFirmware - the agent is running an incomplete version of firmware and requires a download. Currently only used on JetDirect agents. requirePowerCycle - the agent must be power cycled to run the newly downloaded firmware. Currently only used on JetDirect agents. cannotUpgrade - the agent's current firmware revision cannot be upgraded to the revision in the download file. cannotDowngrade - the agent's current firmware revision cannot be downgraded to the revision in the download file.