All MIBs › HP-ICF › stpPortState
stpPortState
Module: HP-ICF
OID (symbolic): HP-ICF::stpPortState
OID (numeric): 1.3.6.1.4.1.11.2.14.3.6.15.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The state of a port on a 2 port bridge is really the state of the bridge itself. Management is only allowed to set this object to 'stpDisabled' or 'stpBlocking'. Setting the object to 'stpDisabled' will turn off spanning tree only if the state is not 'stpBlocking' (to prevent loops). Setting the object to 'stpBlocking' will turn on spanning tree only if it was previously disabled. see: IEEE 802.1(d) 6.8.2.1.3(2), 4.4, 4.5.5.2
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.3.6.15.2 snmpwalk -v2c -c public <target> HP-ICF::stpPortState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.3.6.15.2.1 snmpget -v2c -c public <target> HP-ICF::stpPortState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.3.6.15.2.1 i <value>
Start monitoring HP/HPE ProCurve and Aruba switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF::stpPortState OID value, configure state conditions and alerts, and monitor any HP/HPE ProCurve and Aruba switches from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.3 | icfBridge | HP-ICF |
| 1.3.6.1.4.1.11.2.14.3.6 | stp | HP-ICF |
| 1.3.6.1.4.1.11.2.14.3.6.15 | stpPortTable | HP-ICF |
| 1.3.6.1.4.1.11.2.14.3.6.15.2 | stpPortState | HP-ICF |