All MIBs › HP-ICF › intrusionTrap

intrusionTrap

Module: HP-ICF

OID (symbolic): HP-ICF::intrusionTrap

OID (numeric): 1.3.6.1.4.1.11.2.14.2.0.6

Node type: NOTIFICATION-TYPE

Description: An intrusionTrap(6) is device type specific to EtherTwist hubs with revision 'E' firmware or later and AdvanceStack hubs. It signifies that a port security violation has been detected on a port which has the hubSecPtAlarmEnable flag set to 'enabled'. The MAC address of the intruder and the port on which the intrusion occurred are returned in the PDU.

Examples

Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):

snmptrap -v2c -c public <manager> '' HP-ICF::intrusionTrap
snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.11.2.14.2.0.6

Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):

snmptrapd -f -Lo -c /dev/null authCommunity log public

Example snmptrapd log entry:

zoo11-linux.zoo [UDP: [192.168.30.111]:65437->[192.168.30.10]:162]:
  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (49008029) 5 days, 16:08:00.29
  SNMPv2-MIB::snmpTrapOID.0 = OID: HP-ICF::intrusionTrap

Start monitoring HP/HPE ProCurve and Aruba switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF::intrusionTrap OID value, configure state conditions and alerts, and monitor any HP/HPE ProCurve and Aruba switches from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.11	hp	CLJ8500-MIB
1.3.6.1.4.1.11.2	nm	CLJ8500-MIB
1.3.6.1.4.1.11.2.14	icf	CONFIG-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.11.2.14.2	icfHub	HP-ICF
1.3.6.1.4.1.11.2.14.2.0.6	intrusionTrap	HP-ICF

HP-ICF :: intrusionTrap

intrusionTrap

Module

This MIB depends on