All MIBs › HP-ICF › hubSecPtAlarmEnable
hubSecPtAlarmEnable
Module: HP-ICF
OID (symbolic): HP-ICF::hubSecPtAlarmEnable
OID (numeric): 1.3.6.1.4.1.11.2.14.2.10.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
If enabled, the agent will generate an intrusionTrap if a packet is received on this port with a source MAC address that is different from the hubSecPtAuthorizedAddress for this port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.2.10.1.1.6 snmpwalk -v2c -c public <target> HP-ICF::hubSecPtAlarmEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.2.10.1.1.6.1 snmpget -v2c -c public <target> HP-ICF::hubSecPtAlarmEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.2.10.1.1.6.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.11 | hp | DATAPROTECTOR-MIB |
| 1.3.6.1.4.1.11.2 | nm | DATAPROTECTOR-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | HP-ICF |
| 1.3.6.1.4.1.11.2.14.2 | icfHub | HP-ICF |
| 1.3.6.1.4.1.11.2.14.2.10 | hubSecurity | HP-ICF |
| 1.3.6.1.4.1.11.2.14.2.10.1 | hubSecurePortTable | HP-ICF |
| 1.3.6.1.4.1.11.2.14.2.10.1.1 | hubSecurePortEntry | HP-ICF |
| 1.3.6.1.4.1.11.2.14.2.10.1.1.6 | hubSecPtAlarmEnable | HP-ICF |