All MIBs › CISCO-WIRELESS-P2MP-RF-METRICS-MIB
Organization: Cisco Systems Inc.
Last Updated: 2000-04-19
Category: Vendor: Cisco Devices, Wireless and WLAN
Description: Tracks RF performance for Cisco point-to-multipoint wireless links, including signal strength and interference levels.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is CISCO-WIRELESS-P2MP-RF-METRICS-MIB?
CISCO-WIRELESS-P2MP-RF-METRICS-MIB is a Cisco MIB for point-to-multipoint wireless radio interfaces, providing historical statistical bucket data on RF link performance. It exposes configurable history-control objects and bins of collected metrics such as signal strength or interference-related values, organized per subscriber unit (SU) MAC address. Its purpose is squarely performance monitoring of the wireless RF layer, tracking link-quality trends over time so operators can detect degrading radio links before they fail outright. It is Cisco proprietary and works alongside other Cisco P2MP wireless MIBs rather than standard IETF RF MIBs. It is typically deployed on Cisco point-to-multipoint wireless base stations serving multiple remote subscriber radios, such as in fixed wireless access or utility/backhaul networks, and network engineers usually start with a CISCO-WIRELESS-P2MP-RF-METRICS-MIB download to load it into their monitoring tools.
IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-WIRELESS-P2MP-RF-METRICS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Cisco point-to-multipoint wireless base station
- Cisco fixed wireless subscriber unit
Monitoring Examples
An administrator would configure p2mpHistCtrlTable/p2mpHistCtrlEntry to define a histogram (via p2mpHistClass, p2mpHistSize, p2mpStartBinValue, p2mpEndBinValue) for a given p2mpHistSuMacAddress, then periodically read p2mpPeriodicSum to see how many samples fell into each bin over the p2mpCollDuration interval. A shift in the distribution toward the lower bins (indicating a metric like RSSI or SNR dropping) would signal a subscriber unit's link is degrading due to interference or misalignment. p2mpUpdateRate controls how often the historical bins refresh.
What Can Be Monitored
- RF signal/interference history bins
- per-subscriber-unit RF metrics
- histogram collection duration
- periodic sample counts per bin
- update rate of RF statistics
This MIB depends on
Related MIBs
Imported Objects
From CISCO-SMI
| ciscoMgmt | OBJECT-IDENTITY |
| CwrCollectionAction | |
| CwrCollectionStatus | |
| CwrFixedPointPrecision | |
| CwrFixedPointScale | |
| CwrFixedPointValue | |
| CwrThreshLimitType | |
| CwrUpdateTime | |
| P2mpRadioSignalAttribute | |
| P2mpSnapshotAttribute |
From IF-MIB
| OwnerString | |
| ifIndex | OBJECT-TYPE |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE |
From SNMPv2-TC
| MacAddress | |
| RowStatus | |
| TimeInterval | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| ciscoWirelessRfMetricsMIB | 1.3.6.1.4.1.9.9.180 | This is the MIB Module for the Cisco Wireless Radio Point to MultiPoint interface specification. | ||
| CWR p2mpCollDuration | 1.3.6.1.4.1.9.9.180.1.1.1.8 | CwrUpdateTime | read-create | This object specifies the duration for which this histogram must be accumulated. After successfully accumulating data for this amount of time the collection stops and the p2mpHistStatus changes to statusCaptured. |
| p2mpComplianceHistogramGroup | 1.3.6.1.4.1.9.9.180.5.2.1 | Group of objects implemented in the point to multipoint wireless system for capturing histograms and snapshots of radio signal parameters on the radio interface. | ||
| p2mpComplianceSnapshotGroup | 1.3.6.1.4.1.9.9.180.5.2.4 | Group of objects implemented in the point to multi point wireless system for capturing snapshots of various parameters on the radio interface. | ||
| p2mpComplianceThresholdGroup | 1.3.6.1.4.1.9.9.180.5.2.2 | Group of objects implemented in the point to multipoint wireless system to set thresholds on the radio interface. | ||
| p2mpComplianceTimelineGroup | 1.3.6.1.4.1.9.9.180.5.2.3 | Group of objects implemented in the point to point wireless system for establishing thresholds and capturing timeline data. | ||
| I32 p2mpEndBinValue | 1.3.6.1.4.1.9.9.180.1.1.1.7 | Integer32 | read-create | This object represents the minimum of the values that will be collected in the last bin of the histogram. All values >= p2mpEndBinValue are kept in the last histogram bin. |
| CWR p2mpHistAction | 1.3.6.1.4.1.9.9.180.1.1.1.12 | CwrCollectionAction | read-create | This object represents the action to be carried out on this histogram specification. If a histogram has been successfully captured then it must be cleared before an other capture may be initiated. |
| I32 p2mpHistBinIndex | 1.3.6.1.4.1.9.9.180.1.3.1.1 | Integer32 | not-accessible | This object represents the histogram bin number for the value in p2mpValue. |
| P2M p2mpHistClass | 1.3.6.1.4.1.9.9.180.1.1.1.2 | P2mpRadioSignalAttribute | not-accessible | This objects used to index this table. It represents the attribute that is being histogrammed. |
| p2mpHistCtrlEntry | 1.3.6.1.4.1.9.9.180.1.1.1 | not-accessible | This represents one entry in the p2mpHistCtrlTable. This table is indexed by ifIndex, p2mpHistSuMacAddress, and p2mpHistClass. At the head end: Histograms can be created on each upstream channel either on a per channel or per subscriber unit basis. When histograms are created on a per subscriber unit basis, the user must specify the subscriber unit's MAC address and the ifIndex of the MAC layer (propDocsWirelessMaclayer) at the head end. When histograms are created on a per channel basis, the user must set the MAC address to zero(00 00 00 00 00 00). The channel ID is specified by the ifIndex of the upstream channel. Hence, when creating histograms on a per channel basis, the ifIndex must be set to the ifIndex of the upstream channel (propDocsWirelessUpstream) on which the histogram is to be created. At the subscriber end: Histograms can only be created on the downstream channel. Since there is only one downstream channel, histograms cannot be created per channel ID. Hence, when a histogram is created, the user must set the MAC address (p2mpHistSuMacAdress) to zero(00 00 00 00 00 00). The ifIndex must be set to the ifIndex of the downstream channel (propDocsWirelessDownstream). | |
| p2mpHistCtrlTable | 1.3.6.1.4.1.9.9.180.1.1 | not-accessible | This table contains information about histograms configured in hardware. | |
| p2mpHistDataEntry | 1.3.6.1.4.1.9.9.180.1.3.1 | not-accessible | This represents one entry in the p2mpHistDataTable. At the head end: When viewing the data of a histogram that was created for a specific subscriber unit, the user must specify the subscriber unit's MAC address and the ifIndex of the MAC layer at the head end. When viewing the data of a histogram created for a specific channel, the user must set the MAC address to zero (00 00 00 00 00 00). The ifIndex is the upstream channel on which the histogram was created. At the subscriber end: The user sets the MAC address (p2mpHistSuMacAdress) to zero(00 00 00 00 00 00). The ifIndex is the channel ID of the downstream channel. | |
| p2mpHistDataTable | 1.3.6.1.4.1.9.9.180.1.3 | not-accessible | This table contains histogram values collected based on the specifications in the p2mpHistCtrlTable. | |
| NUM p2mpHistMax | 1.3.6.1.4.1.9.9.180.1.2.1.3 | CwrFixedPointValue | read-only | This object represents maximum value seen in this histogram. |
| NUM p2mpHistMean | 1.3.6.1.4.1.9.9.180.1.2.1.4 | CwrFixedPointValue | read-only | This object represents mean of the values in this histogram. |
| NUM p2mpHistMin | 1.3.6.1.4.1.9.9.180.1.2.1.2 | CwrFixedPointValue | read-only | This object represents minimum value seen in this histogram. |
| STR p2mpHistOwner | 1.3.6.1.4.1.9.9.180.1.1.1.11 | OwnerString | read-create | This object identifies management station that created this histogram specification. |
| ROW p2mpHistRowStatus | 1.3.6.1.4.1.9.9.180.1.1.1.14 | RowStatus | read-create | This object may be used to create or delete a histogram control specification. |
| INT p2mpHistSize | 1.3.6.1.4.1.9.9.180.1.1.1.3 | INTEGER | read-create | This object lets the user select the granularity of the histogram. The number of bins used for the capture in each category is hardware dependent. |
| CWR p2mpHistStatus | 1.3.6.1.4.1.9.9.180.1.1.1.13 | CwrCollectionStatus | read-only | This object represents the current state of this histogram. Once the histogram collection is complete the status changes to statusCaptured and the data is available for use. None of the parameters of a histogram specification may be modified when the specification is in statusInProgress. A statusCaptured or statusStopped histogram must be actionClear'ed before it can be restarted. The histogram may be read accurately between the p2mpUpdateRate intervals. If the read spans across the update time data from the previous and current updates can be mingled. |
| MAC p2mpHistSuMacAddress | 1.3.6.1.4.1.9.9.180.1.1.1.1 | MacAddress | not-accessible | This object is used to index this table. At the head end: When a histogram is created on a per subscriber unit basis, this object should reflect the MAC address of the subscriber unit. When a histogram is created on a per channel basis, this object must be set to zero(00 00 00 00 00 00). At the subscriber end: When creating a histogram, this object must always be set to zero (00 00 00 00 00 00). |
| p2mpHistSummaryEntry | 1.3.6.1.4.1.9.9.180.1.2.1 | not-accessible | This represents one entry in the p2mpHistSummaryTable. At the head end: When viewing the summary of a histogram that was created for a specific subscriber unit, the user must specify the subscriber unit's MAC address and the ifIndex of the MAC layer at the head end. When viewing the summary of a histogram created for a specific channel, the user must set the MAC address to zero (00 00 00 00 00 00). The ifIndex is the upstream channel on which the histogram was created. At the subscriber end: The user sets the MAC address (p2mpHistSuMacAdress) to zero(00 00 00 00 00 00). The ifIndex is the channel ID of the downstream channel. | |
| p2mpHistSummaryTable | 1.3.6.1.4.1.9.9.180.1.2 | not-accessible | This table contains histogram Summary collected based on the specifications in the p2mpHistCtrlTable. | |
| NUM p2mpHistSumPrecision | 1.3.6.1.4.1.9.9.180.1.1.1.5 | CwrFixedPointPrecision | read-only | This variable indicates the number of decimal places used for precision when interpreting the fixed-point values in the histogram summary table. |
| NUM p2mpHistSumScale | 1.3.6.1.4.1.9.9.180.1.1.1.4 | CwrFixedPointScale | read-only | This variable indicates the exponent to apply to the fixed-point values in the histogram summary table. |
| CWR p2mpHistUpdateTime | 1.3.6.1.4.1.9.9.180.1.2.1.1 | CwrUpdateTime | read-only | This object represents the sysUpTime when this histogram was retrieved from hardware. |
| NUM p2mpImaginaryPart | 1.3.6.1.4.1.9.9.180.4.3.1.3 | CwrFixedPointValue | read-only | The data sample value. Imaginary part of the attribute is represented by a complex number. |
| T/F p2mpPeriodicSum | 1.3.6.1.4.1.9.9.180.1.1.1.10 | TruthValue | read-create | The histogram data is updated every p2mpUpdateRate seconds. When set to true(1), the latest histogram data set is summed with the previous histogram data set and the p2mpHistSummaryTable will reflect cumulative values. When set to false(2), only the latest data set is made available and the p2mpHistSummarytable will reflect the latest values. |
| p2mpRadioHistoryGroup | 1.3.6.1.4.1.9.9.180.1 | |||
| p2mpRadioRfCompliance | 1.3.6.1.4.1.9.9.180.5.1.1 | The compliance statement for devices that are Point to MultiPoint wireless interfaces. | ||
| p2mpRadioRfCompliances | 1.3.6.1.4.1.9.9.180.5.1 | |||
| p2mpRadioRfConformance | 1.3.6.1.4.1.9.9.180.5 | |||
| p2mpRadioRfGroups | 1.3.6.1.4.1.9.9.180.5.2 | |||
| p2mpRadioSnapshotGroup | 1.3.6.1.4.1.9.9.180.4 | |||
| p2mpRadioThresholdGroup | 1.3.6.1.4.1.9.9.180.3 | |||
| p2mpRadioTimelineGroup | 1.3.6.1.4.1.9.9.180.2 | |||
| NUM p2mpRealPart | 1.3.6.1.4.1.9.9.180.4.3.1.2 | CwrFixedPointValue | read-only | The data sample value. Real part. |
| p2mpRfMetricsMIBNotification | 1.3.6.1.4.1.9.9.180.3.2.0 | |||
| p2mpRfMetricsMIBNotificationPrefix | 1.3.6.1.4.1.9.9.180.3.2 | |||
| I32 p2mpSnapAttr1Id | 1.3.6.1.4.1.9.9.180.4.2.1.2 | Integer32 | read-only | This object represents the bit in the P2mpSnapshotAttribute bitmask that identifies the first attribute value. |
| I32 p2mpSnapAttr1Size | 1.3.6.1.4.1.9.9.180.4.2.1.3 | Integer32 | read-only | This object represents the number of values captured for the snapshot p2mpSnapAttr1Id. |
| I32 p2mpSnapAttr2Id | 1.3.6.1.4.1.9.9.180.4.2.1.4 | Integer32 | read-only | This object represents the bit in the P2mpSnapshotAttribute bitmask that identifies the second attribute value. |
| I32 p2mpSnapAttr2Size | 1.3.6.1.4.1.9.9.180.4.2.1.5 | Integer32 | read-only | This object represents the number of values captured for the snapshot p2mpSnapAttr2Id. |
| I32 p2mpSnapAttr3Id | 1.3.6.1.4.1.9.9.180.4.2.1.6 | Integer32 | read-only | This object represents the bit in the P2mpSnapshotAttribute bitmask that identifies the third attribute value. |
| I32 p2mpSnapAttr3Size | 1.3.6.1.4.1.9.9.180.4.2.1.7 | Integer32 | read-only | This object represents the number of values captured for the snapshot p2mpSnapAttr3Id. |
| I32 p2mpSnapAttr4Id | 1.3.6.1.4.1.9.9.180.4.2.1.8 | Integer32 | read-only | This object represents the bit in the P2mpSnapshotAttribute bitmask that identifies the fourth attribute value. |
| I32 p2mpSnapAttr4Size | 1.3.6.1.4.1.9.9.180.4.2.1.9 | Integer32 | read-only | This object represents the number of values captured for the snapshot p2mpSnapAttr4Id. |
| p2mpSnapDataEntry | 1.3.6.1.4.1.9.9.180.4.3.1 | not-accessible | This represents one entry in the P2mpSnapDataTable. It is indexed by ifIndex of the MAC layer (propDocsWirelessMaclayer), p2mpSnapshotIndex, and p2mpSnapValueIndex. The values in this table represent real and complex numbers. If they are real numbers then p2mpRealPart contains the data and p2mpImaginaryPart is undefined. | |
| p2mpSnapDataTable | 1.3.6.1.4.1.9.9.180.4.3 | not-accessible | This table contains snapshot values collected based on the specifications in the p2mpSnapshotCtrlTable. | |
| CWR p2mpSnapshotAction | 1.3.6.1.4.1.9.9.180.4.1.1.6 | CwrCollectionAction | read-create | This object represents the action to be carried out on this snapshot specification. If a snapshot has been successfully captured then it must be cleared before another capture may be initiated. |
| p2mpSnapshotCtrlEntry | 1.3.6.1.4.1.9.9.180.4.1.1 | not-accessible | This represents one entry in the p2mpSnapshotCntrlTable It is indexed by the ifIndex of the MAC layer (propDocsWirelessMaclayer) and p2mpSnapshotDspNum. | |
| p2mpSnapshotCtrlTable | 1.3.6.1.4.1.9.9.180.4.1 | not-accessible | This table contains information about the snapshots configured in hardware. When data is collected it will be stored in p2mpSnapDataTable. Snapshots can only be captured per DSP. | |
| NUM p2mpSnapshotDataPrecision | 1.3.6.1.4.1.9.9.180.4.1.1.4 | CwrFixedPointPrecision | read-only | This variable indicates the number of decimal places used for precision when interpreting the fixed-point values in the snapshot data table. |
| NUM p2mpSnapshotDataScale | 1.3.6.1.4.1.9.9.180.4.1.1.3 | CwrFixedPointScale | read-only | This variable indicates the exponent to apply to the fixed-point values in the snapshot data table. |
| I32 p2mpSnapshotDspNum | 1.3.6.1.4.1.9.9.180.4.1.1.1 | Integer32 | not-accessible | This object represents the DSP on which the snapshot needs to be collected. |
| STR p2mpSnapshotOwner | 1.3.6.1.4.1.9.9.180.4.1.1.5 | OwnerString | read-create | This object identifies management station that created this snapshot specification. |
| ROW p2mpSnapshotRowStatus | 1.3.6.1.4.1.9.9.180.4.1.1.8 | RowStatus | read-create | This object may be used to create or delete this snapshot specification. |
| CWR p2mpSnapshotStatus | 1.3.6.1.4.1.9.9.180.4.1.1.7 | CwrCollectionStatus | read-only | This object represents the current status of this snapshot specification. When the status in statusInProgress none of the snapshot parameters can be configured. When the status is statusCaptured then data is available for use. |
| P2M p2mpSnapshotType | 1.3.6.1.4.1.9.9.180.4.1.1.2 | P2mpSnapshotAttribute | read-create | This identfies the set of radio signal attributes being monitored in this snapshot. |
| p2mpSnapSummaryEntry | 1.3.6.1.4.1.9.9.180.4.2.1 | not-accessible | This represents one entry in the p2mpSnapSummaryTable. It is indexed by the ifIndex of the MAC layer (propDocsWirelessMaclayer) and p2mpSnapshotDspNum. | |
| p2mpSnapSummaryTable | 1.3.6.1.4.1.9.9.180.4.2 | not-accessible | This table contains summary information for captured snapshots defined in p2mpSnapshotCtrlTable. | |
| I32 p2mpSnapValueIndex | 1.3.6.1.4.1.9.9.180.4.3.1.1 | Integer32 | not-accessible | This object represents the snapshot entry value number. The hardware provides a maximum of 1024 data points for any snapshot attribute. Since we can capture a maximum of 4 attributes in a single snapshot, this object can have a maximum value of 4096 (1024 * 4). |
| I32 p2mpStartBinValue | 1.3.6.1.4.1.9.9.180.1.1.1.6 | Integer32 | read-create | This object represents the maximum of the values that will be collected in the first bin of the histogram. All values <= p2mpStartBinValue are kept in the first histogram bin. |
| P2M p2mpThreshAttribute | 1.3.6.1.4.1.9.9.180.3.1.1.2 | P2mpRadioSignalAttribute | not-accessible | This represents the attribute of a radio link which needs to be thresholded. For each of these attributes, the p2mpThreshType identifies the type of change to monitor. When that threshold is exceeded a Trap with appropriate parameters will be generated. |
| NUM p2mpThreshHysteresisTime | 1.3.6.1.4.1.9.9.180.3.1.1.5 | TimeInterval | read-create | When radio signals oscillate around threshold values, they potentially flood the system with notifications. This object specifies the amount of time to wait before sending an identical notification if the oscillations continue. |
| NUM p2mpThreshLimitTime | 1.3.6.1.4.1.9.9.180.3.1.1.6 | TimeInterval | read-create | It is desirable to know when a radio signal has stabilized. This object specifies the amount of time that the radio signal should stay below the threshold after crossing it. If it does then a 'clear' notification is sent. |
| p2mpThresholdEntry | 1.3.6.1.4.1.9.9.180.3.1.1 | not-accessible | This represents one entry in the p2mpThresholdTable. At the head end: Thresholds can be created on each upstream channel either on a per channel or per subscriber unit basis. When creating thresholds on a per subscriber unit basis, the user must specify the subscriber unit's MAC address and the ifIndex of the MAC layer (propDocsWirelessMaclayer) at the head end. When creating thresholds on a per channel basis, the user must set the MAC address to zero(00 00 00 00 00 00). The channel ID is specified by the ifIndex of the upstream channel. Hence, when creating thresholds on a per channel basis, the ifIndex must be set to the ifIndex of the upstream channel (propDocsWirelessUpstream) on which the threshold is created. At the subscriber end: Thresholds can only be created on the downstream channel. Since there is only one downstream channel, thresholds cannot be created per channel ID. Hence, when a thresholds is created, the users sets the MAC address (p2mpThreshSuMacAdress) to zero(00 00 00 00 00 00). The ifIndex must be set to the ifIndex of the downstream channel (propDocsWirelessDownstream). | |
| p2mpThresholdTable | 1.3.6.1.4.1.9.9.180.3.1 | not-accessible | This table enables the user to establish thresholds for the radio signals analyzed on the radio interface. | |
| ROW p2mpThreshRowStatus | 1.3.6.1.4.1.9.9.180.3.1.1.7 | RowStatus | read-create | This object represents the status of this threshold entry. It may be used to create a new threshold specification. For every p2mpThreshAttribute one threshold of p2mpThreshType on one DSP may be created. |
| MAC p2mpThreshSuMacAddr | 1.3.6.1.4.1.9.9.180.3.1.1.1 | MacAddress | not-accessible | This object is used to index this table. At the head end: When a threshold is created on a per subscriber unit basis, this object should reflect the MAC address of the subscriber unit. When a threshold is created on a per channel basis, this object must be set to zero(00 00 00 00 00 00). At the subscriber end: When creating a threshold , this object must always be set to zero (00 00 00 00 00 00). |
| CWR p2mpThreshType | 1.3.6.1.4.1.9.9.180.3.1.1.3 | CwrThreshLimitType | not-accessible | This object represents the kind of change that needs to be monitored for the p2mpThreshAttribute. An event is generated when the specified condition is met. |
| I32 p2mpThreshValue | 1.3.6.1.4.1.9.9.180.3.1.1.4 | Integer32 | read-create | This object represents the value to be compared against. The p2mpThreshType determines the way in which it is used. It is used as follows: if p2mpThreshType is .. highThresh : Notify if data sample exceeds the p2mpThreshValue. lowThresh : Notify if data sample recedes below the p2mpThreshValue. upChange : Notify if data sample increases by more than p2mpThreshValue. downChange : Notify if data sample decreases by more than p2mpThreshValue. upLimit : Notify if data sample crosses p2mpThreshValue while increasing in value. lowLimit : Notify if data sample crosses p2mpThreshValue while decreasing in value. |
| CWR p2mpTlAction | 1.3.6.1.4.1.9.9.180.2.1.1.9 | CwrCollectionAction | read-create | This object represents the action to be carried out on this timeline specification. If a timeline has been successfully captured then it must be cleared before another capture may be initiated. |
| P2M p2mpTlClass | 1.3.6.1.4.1.9.9.180.2.1.1.2 | P2mpRadioSignalAttribute | not-accessible | This object represents the attribute for which a timline capture is requested. When a timeline is requested p2mpBufSize worth of data will be captured. |
| p2mpTlCtrlEntry | 1.3.6.1.4.1.9.9.180.2.1.1 | not-accessible | This represents one entry in the p2mpTlCtrlTable. This table is indexed by ifIndex, p2mpTlSuMacAddress, and p2mpTlClass. At the head end: Timelines can be created on each upstream channel either on a per channel or per subscriber unit basis. When timelines are created on a per subscriber unit basis, the user must specify the subscriber unit's MAC address and the ifIndex of the MAC layer (propDocsWirelessMaclayer) at the head end. When timelines are created on a per channel basis, the user must set the MAC address to zero(00 00 00 00 00 00). The channel ID is specified by the ifIndex of the upstream channel. Hence, when creating timelines on a per channel basis, the ifIndex must be set to the ifIndex of the upstream channel on which the timeline is to be created At the subscriber end: Timelines can only be created on the downstream channel. Since there is only one downstream channel, timelines cannot be created per channel ID. Hence, when a timeline is created, the user must set the MAC address (p2mpTlSuMacAdress) to zero(00 00 00 00 00 00). The ifIndex must be set to the ifIndex of the downstream channel (propDocsWirelessDownstream). | |
| p2mpTlCtrlTable | 1.3.6.1.4.1.9.9.180.2.1 | not-accessible | This table contains information about timelines configured in hardware. When radio signal data is collected it will be stored in a buffer of size p2mpTlNumDataValues which may be later retrieved. | |
| p2mpTlDataEntry | 1.3.6.1.4.1.9.9.180.2.3.1 | not-accessible | This represents one entry in the p2mpTlDataTable. At the head end: When viewing the data of a timeline created for a specific subscriber unit, the user must specify the subscriber unit's MAC address and the ifIndex of the MAC layer at the head end. When viewing the data of a timeline created for a specific channel, the user must set the MAC address to zero(00 00 00 00 00 00). The ifIndex is the upstream channel on which the timeline was created. At the subscriber end: The user sets the MAC address (p2mpTlSuMacAdress) to zero(00 00 00 00 00 00). The ifIndex is the channel ID of the downstream channel. | |
| NUM p2mpTlDataPrecision | 1.3.6.1.4.1.9.9.180.2.1.1.7 | CwrFixedPointPrecision | read-only | This variable indicates the number of decimal places used for precision when interpreting the fixed-point values in the timeline data table. |
| NUM p2mpTlDataScale | 1.3.6.1.4.1.9.9.180.2.1.1.6 | CwrFixedPointScale | read-only | This variable indicates the exponent to apply to the fixed-point values in the timeline data table. |
| p2mpTlDataTable | 1.3.6.1.4.1.9.9.180.2.3 | not-accessible | This table contains timeline values collected based on the specifications in the p2mpTlCtrlTable. | |
| I32 p2mpTlNumDataValues | 1.3.6.1.4.1.9.9.180.2.1.1.5 | Integer32 | read-create | This object indicates the number of data values to be captured for this timeline. The captured data can be viewed by reading the p2mpTlDataTable. |
| I32 p2mpTlNumValues | 1.3.6.1.4.1.9.9.180.2.2.1.2 | Integer32 | read-only | This object represents the number of values available in the timeline |
| STR p2mpTlOwner | 1.3.6.1.4.1.9.9.180.2.1.1.11 | OwnerString | read-create | This object identifies the management station that created this timeline specification. |
| INT p2mpTlPostTrigBufMgmt | 1.3.6.1.4.1.9.9.180.2.1.1.10 | INTEGER | read-create | Once a trigger fires, this object determines which portion of the collected data to capture for use. If it is: preTrigger(1) : Then most of the data collected prior to trigger is captured. postTrigger(2): Then most of the data collected after the trigger is captured. |
| ROW p2mpTlRowStatus | 1.3.6.1.4.1.9.9.180.2.1.1.13 | RowStatus | read-create | This object may be used to create or delete a timeline control specification. Once created data sampling starts based on the value of p2mpTlAction. |
| I32 p2mpTlSamplePeriod | 1.3.6.1.4.1.9.9.180.2.1.1.8 | Integer32 | read-create | This lets the user specify the time in milliseconds between consecutive timeline samples. The special value of '0' indicates that the timeline will be sampled on every burst of data. The number of bursts in one milliseconds depends on the modulation profile. |
| CWR p2mpTlStatus | 1.3.6.1.4.1.9.9.180.2.1.1.12 | CwrCollectionStatus | read-only | This object represents the current state of this timeline. Once the timeline collection is complete the status changes to statusCaptured and the data is available for use. None of the parameters of a timeline specification may be modified when the specification is in statusInProgress. A statusCaptured or statusStopped timeline must be actionClear'ed before it can be restarted. |
| MAC p2mpTlSuMacAddress | 1.3.6.1.4.1.9.9.180.2.1.1.1 | MacAddress | not-accessible | This object is used to index this table. At the head end: When a timeline is created on a per subscriber unit basis, this object should reflect the MAC address of the subscriber unit. When a timeline is created on a per channel basis, this object must be set to zero(00 00 00 00 00 00). At the subscriber end: When creating a timeline, this object must always be set to zero (00 00 00 00 00 00). |
| p2mpTlSummaryEntry | 1.3.6.1.4.1.9.9.180.2.2.1 | not-accessible | This represents one entry in the p2mpTlSummaryTable. At the head end: When viewing the summary of a timeline created for a specific subscriber unit, the user must specify the subscriber unit's MAC address and the ifIndex of the MAC layer at the head end. When viewing the summary of a timeline created for a specific channel, the user must set the MAC address to zero(00 00 00 00 00 00). The ifIndex is the upstream channel on which the timeline was created. At the subscriber end: The user sets the MAC address (p2mpTlSuMacAdress) to zero(00 00 00 00 00 00). The ifIndex is the channel ID of the downstream channel. | |
| p2mpTlSummaryTable | 1.3.6.1.4.1.9.9.180.2.2 | not-accessible | This table contains Timeline Summary collected based on the specifications in the p2mpTlCtrlTable. | |
| P2M p2mpTlThreshAttribute | 1.3.6.1.4.1.9.9.180.2.1.1.3 | P2mpRadioSignalAttribute | read-create | This object, along with p2mpTlThreshType, identifies the threshold in the p2mpThresholdTable responsible for trigerring this timeline. When this object's value is none(0), it implies that there is no threshold associated with this timeline. |
| CWR p2mpTlThreshType | 1.3.6.1.4.1.9.9.180.2.1.1.4 | CwrThreshLimitType | read-create | This object, along with p2mpTlThreshAttribute, identifies the threshold in the p2mpThresholdTable responsible for trigerring this timeline. When this object's value is none(0), it implies that there is no threshold associated with this timeline. |
| I32 p2mpTlTriggerLoc | 1.3.6.1.4.1.9.9.180.2.2.1.3 | Integer32 | read-only | This object contains the value of p2mpTlValueIndex which represents the entry in the p2mpTlDataTable that caused the stop trigger to fire, thereby resulting in this timeline to be collected. |
| CWR p2mpTlUpdateTime | 1.3.6.1.4.1.9.9.180.2.2.1.1 | CwrUpdateTime | read-only | This object represents the sysUpTime when this timeline capture was completed. |
| NUM p2mpTlValue | 1.3.6.1.4.1.9.9.180.2.3.1.2 | CwrFixedPointValue | read-only | This object represents the radio signal data sampled. |
| I32 p2mpTlValueIndex | 1.3.6.1.4.1.9.9.180.2.3.1.1 | Integer32 | not-accessible | This object is the index into the timeline data. |
| NTF p2mpTrapThresh | 1.3.6.1.4.1.9.9.180.3.2.0.1 | The radio subsystem generates this trap when a threshold crosses its specified limit. The parameters identify the following: p2mpThreshValue - The value that was crossed. p2mpThreshHysteresisTime - The specified hysteresis time p2mpThreshLimitTime - The specified limit time | ||
| CWR p2mpUpdateRate | 1.3.6.1.4.1.9.9.180.1.1.1.9 | CwrUpdateTime | read-create | This object represents rate at which snapshots of the histogram will be available. |
| I32 p2mpValue | 1.3.6.1.4.1.9.9.180.1.3.1.2 | Integer32 | read-only | This object represents the value in the histogram bin p2mpHistBinIndex. |
RFC description
Monitors Cisco wireless P2MP RF performance metrics including signal strength and interference levels.
Start monitoring Cisco point-to-multipoint wireless base station/subscriber unit (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.