All MIBs › CISCO-WIRELESS-P2MP-RF-METRICS-MIB › p2mpSnapshotStatus
p2mpSnapshotStatus
Module: CISCO-WIRELESS-P2MP-RF-METRICS-MIB
OID (symbolic): CISCO-WIRELESS-P2MP-RF-METRICS-MIB::p2mpSnapshotStatus
OID (numeric): 1.3.6.1.4.1.9.9.180.4.1.1.7
Node type: OBJECT-TYPE
Type: CwrCollectionStatus
Access: read-only
Description: This object represents the current status of this snapshot specification. When the status in statusInProgress none of the snapshot parameters can be configured. When the status is statusCaptured then data is available for use.
What is p2mpSnapshotStatus?
This read-only object reports the current lifecycle status of a snapshot specification, with the desc noting that none of its parameters can be configured while status is statusInProgress, and that statusCaptured means the captured data is ready to read. An admin polls this to know when it's safe to either modify the snapshot configuration or retrieve its results. For example, an admin who just triggered a snapshot via p2mpSnapshotAction would watch p2mpSnapshotStatus until it flips to statusCaptured before reading the p2mpRealPart and p2mpImaginaryPart values.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.180.4.1.1.7 snmpwalk -v2c -c public <target> CISCO-WIRELESS-P2MP-RF-METRICS-MIB::p2mpSnapshotStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.180.4.1.1.7.1 snmpget -v2c -c public <target> CISCO-WIRELESS-P2MP-RF-METRICS-MIB::p2mpSnapshotStatus.1
Start monitoring Cisco point-to-multipoint wireless base station/subscriber unit (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-P2MP-RF-METRICS-MIB::p2mpSnapshotStatus OID value, configure state conditions and alerts, and monitor any Cisco point-to-multipoint wireless base station/subscriber unit (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.180 | ciscoWirelessRfMetricsMIB | CISCO-WIRELESS-P2MP-RF-METRICS-MIB |
| 1.3.6.1.4.1.9.9.180.4 | p2mpRadioSnapshotGroup | CISCO-WIRELESS-P2MP-RF-METRICS-MIB |
| 1.3.6.1.4.1.9.9.180.4.1 | p2mpSnapshotCtrlTable | CISCO-WIRELESS-P2MP-RF-METRICS-MIB |
| 1.3.6.1.4.1.9.9.180.4.1.1 | p2mpSnapshotCtrlEntry | CISCO-WIRELESS-P2MP-RF-METRICS-MIB |
| 1.3.6.1.4.1.9.9.180.4.1.1.7 | p2mpSnapshotStatus | CISCO-WIRELESS-P2MP-RF-METRICS-MIB |